1994 Daihatsu Hijet 660 high custom high roof Specs

OVERVIEW

With a fuel consumption of 58.8 mpg US - 70.6 mpg UK - 4.0 L/100km, a weight of 1763 lbs (800 kg), the Daihatsu Hijet 660 high custom high roof has a water cooling 4 cycle 3 cylinder DOHC12 valve engine, a Regular gasoline engine EF-ZS(AT)/EF-GS(MT). This engine EF-ZS(AT)/EF-GS(MT) produces a maximum power of 44.6 PS (44 bhp - 32.8 kW) at 5900 rpm and a maximum torque of 58.8 Nm (43.3 lb.ft - 6 kg.m) at 4400 rpm. The engine power is transmitted to the road by the rear wheel drive (MID) with a 5MT gearbox. For stopping power, the Daihatsu Hijet 660 high custom high roof braking system includes Leading trailing drum brake at the rear and Disk at the front. Chassis details - Daihatsu Hijet 660 high custom high roof has rigid axle leaf spring rear suspension and McPherson strut coil spring front suspension for road holding and ride confort.

Add to compare list

- Present
- Option
- Not Present (or Dealer Option)

• Search Car Specs
• Other Hijet Specs Database

By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on April 25, 2024

Introduction to the Daihatsu Hijet 660 High Custom High Roof

The 1994-1998 Daihatsu Hijet 660 High Custom High Roof represents a compact and versatile commercial van that made its mark during its production period, which spanned from January 1994 to December 1998. As part of the Hijet lineup, this model boasted a mid-engine placement and offered various features and specifications tailored to meet the demands of commercial and industrial users.

This vehicle came equipped with a 5-speed manual transmission and featured a modest yet efficient 659 cm3 engine. The engine, identified by the codes EF-ZS for the automatic transmission variant and EF-GS for the manual transmission version, generated approximately 44.6 PS (44 horsepower) at 5900 rpm and a peak torque of 58.8 Nm at 4400 rpm. With its water-cooled 3-cylinder DOHC12 valve configuration, the engine delivered reliable performance.

In terms of its exterior dimensions, the Hijet 660 High Custom High Roof measured 329.5 cm in length, 139.5 cm in width, and 185.5 cm in height, with a wheelbase of 190 cm. Ground clearance stood at 16 cm, making it suitable for various road conditions and loading requirements. The vehicle had a weight of 800 kg and offered seating for up to four individuals through its five doors.

With a fuel tank capacity of 10.5 US gallons (8.7 UK gallons or 40 liters), this Daihatsu Hijet model provided adequate fuel storage for its size. Its fuel efficiency was notable, with a consumption rate of approximately 58.8 miles per gallon in the US, 70.6 miles per gallon in the UK, or 4.0 liters per 100 kilometers in more metric terms. These specifications made it a cost-effective choice for businesses and drivers seeking economical transportation solutions.

In terms of suspension, the front utilized McPherson struts with coil springs, while the rear featured a rigid axle with leaf springs. The vehicle's tires were sized at 145 R12-6PRLT and included standard aluminum disk rims.

While the Daihatsu Hijet 660 High Custom High Roof offered practicality and efficiency, it did not feature some of the more advanced amenities found in contemporary vehicles. For instance, it did not include power-adjustable door mirrors, sunroofs, or xenon lamps. The interior featured basic amenities, with options like power steering available. Safety features like airbags and TCS were not part of its design, reflecting its primary focus on utility.

Overall, the 1994-1998 Daihatsu Hijet 660 High Custom High Roof catered to the needs of commercial users, offering a compact and efficient solution for transporting cargo and passengers while maintaining cost-effective fuel consumption. Its durability and practicality made it a viable choice for businesses during its production period.

Model Years and Generations

The Daihatsu Hijet 660 High Custom High Roof, produced from 1994 to 1998, belongs to a distinct generation within the Hijet lineup. This generation of the Hijet, characterized by its compact dimensions and utilitarian design, aimed to meet the needs of commercial users seeking an efficient and dependable workhorse.

During this period, Daihatsu continued to refine and improve upon the design and specifications of the Hijet 660 High Custom High Roof. The model received updates and enhancements to stay competitive in the market and adhere to changing safety and emission regulations. These continuous improvements made the 1994-1998 Hijet a reliable choice for various commercial and industrial applications.

The mid-engine layout, modest engine displacement, and compact exterior dimensions of the Hijet 660 High Custom High Roof remained consistent throughout its production years. These characteristics contributed to the model's versatility and made it well-suited for navigating crowded urban environments while offering ample cargo space.

The availability of different trim levels and variants allowed customers to choose the configuration that best suited their specific needs. Whether used for transporting goods, passengers, or both, this generation of the Daihatsu Hijet catered to a wide range of businesses and industries.

While the core design elements remained relatively consistent, it's worth noting that automotive technology and safety standards evolved during the late 1990s. Therefore, later models within this generation may have incorporated some updated features or improvements compared to their earlier counterparts. These could include minor design tweaks, enhanced safety features, or improved fuel efficiency.

In conclusion, the 1994-1998 Daihatsu Hijet 660 High Custom High Roof represented a specific generation within the Hijet lineup, offering reliability and versatility for commercial and industrial applications. While the core design remained consistent, it's important to consider potential updates and enhancements that may have been introduced over the course of these model years.

Trim Levels and Variants

The 1994-1998 Daihatsu Hijet 660 High Custom High Roof was offered in various trim levels and variants, providing customers with choices to suit their specific needs and preferences. These trim levels and variants were designed to cater to a range of commercial and industrial applications, ensuring that the Hijet could adapt to different requirements.

While the core specifications and design elements of the Hijet 660 High Custom High Roof remained consistent across the model years, the trim levels and variants allowed buyers to select the features and configurations that best suited their intended use. Some of the common trim levels and variants available during this period included:

1. Standard Commercial: This basic trim level of the Hijet was designed for practicality and utility. It often featured minimal amenities and was ideal for businesses that required a reliable workhorse for transporting goods or equipment.

2. Passenger Van: For those needing to transport passengers, there were passenger van variants available. These versions typically included seating for more passengers and were suitable for shuttle services, public transportation, or family use.

3. Customized Cargo: Some variants were tailored for specific cargo needs. These models might have included specialized cargo compartments or shelving, making them ideal for delivery services or tradespeople requiring specialized storage solutions.

4. Special Editions: Over the years, Daihatsu occasionally introduced special edition models or limited runs of the Hijet 660 High Custom High Roof. These variants might have featured unique styling elements, additional features, or commemorative badges.

5. Utility Configurations: Utility variants of the Hijet were available, featuring open cargo areas at the rear. These models were suitable for tasks such as landscaping, construction, or agriculture.

6. Customization Options: Depending on the market and dealership, buyers often had the option to further customize their Hijet with various accessories and add-ons, including roof racks, toolboxes, or specialized lighting.

It's important to note that the availability of specific trim levels and variants may have varied by region and market. Additionally, the level of customization and the features offered within each trim level could differ, giving customers flexibility in tailoring the vehicle to their needs.

Overall, the range of trim levels and variants for the 1994-1998 Daihatsu Hijet 660 High Custom High Roof showcased its adaptability and versatility, ensuring that it could meet the diverse demands of businesses and individuals in need of a compact and efficient commercial van.

Engine Specifications

The engine specifications of the 1994-1998 Daihatsu Hijet 660 High Custom High Roof were designed to provide reliable and efficient performance, making it well-suited for various commercial and industrial applications. This model featured a modest yet capable engine configuration that contributed to its reputation for affordability and dependability.

The engine powering the Hijet 660 High Custom High Roof was available in two variants, each tailored to a specific transmission type:

- Automatic Transmission (EF-ZS): The automatic transmission version of this model was equipped with an engine bearing the code EF-ZS. This engine produced approximately 44.6 PS (44 horsepower) at 5900 rpm, offering a reliable power source for the vehicle's intended purposes. It delivered a peak torque of 58.8 Nm at 4400 rpm.

- Manual Transmission (EF-GS): The manual transmission variant featured an engine with the code EF-GS. This engine generated the same power output as the automatic version, providing 44.6 PS (44 horsepower) at 5900 rpm. Its torque performance was consistent, with a peak torque of 58.8 Nm at 4400 rpm.

Both engine variants were designed as water-cooled, 4-cycle, 3-cylinder units with a 12-valve configuration. This design aimed to balance efficiency and performance, making the Hijet 660 High Custom High Roof suitable for urban and suburban driving, where maneuverability and fuel economy were essential.

Fuel type for these engines was regular gasoline, ensuring accessibility and affordability for owners. The engines were engineered to provide dependable performance while maintaining efficiency and minimizing emissions, in line with the requirements of the time.

The fuel consumption of the 1994-1998 Daihatsu Hijet 660 High Custom High Roof was notable for its efficiency. In a 60 km/h mode, this model achieved a fuel consumption rate of approximately 58.8 miles per gallon in the US, 70.6 miles per gallon in the UK, or 4.0 liters per 100 kilometers in more metric terms. These figures highlighted the vehicle's economical operation, contributing to its appeal for budget-conscious businesses and individuals.

In conclusion, the engine specifications of the 1994-1998 Daihatsu Hijet 660 High Custom High Roof showcased a balance of performance and efficiency, making it a practical choice for commercial and industrial applications where reliability and cost-effectiveness were paramount. Whether equipped with an automatic or manual transmission, this model provided dependable power for various transportation needs.

Dimensions and Sizes

The 1994-1998 Daihatsu Hijet 660 High Custom High Roof featured compact dimensions and sizes that contributed to its maneuverability and versatility, making it a practical choice for various commercial and industrial applications. These dimensions allowed the vehicle to navigate through urban areas with ease while providing adequate space for cargo or passengers.

In terms of exterior measurements, the Hijet 660 High Custom High Roof had a length of approximately 329.5 cm (129.72 inches), a width of around 139.5 cm (54.92 inches), and a height of about 185.5 cm (73.03 inches). These compact dimensions were well-suited for city driving and parking, ensuring that the vehicle could easily fit into tight spaces and navigate congested streets.

The wheelbase of the Hijet measured approximately 190 cm (74.8 inches), contributing to stability and ride comfort. A minimum turning circle or turning diameter of 3.8 meters enhanced the vehicle's maneuverability, allowing it to make tight turns when necessary.

The ground clearance or ride height of the Hijet 660 High Custom High Roof was approximately 16 cm (6.29 inches), striking a balance between low ground clearance for stability and high enough clearance to handle various road conditions, including uneven terrain.

In terms of seating and doors, the vehicle offered seating for up to four individuals through its five doors, including both rear-hinged and sliding doors. This configuration allowed for convenient access to the interior and flexibility in terms of passenger and cargo accommodation.

The vehicle's weight was approximately 800 kg (1763 lbs), which was in line with its compact design and contributed to its fuel efficiency and maneuverability.

Overall, the dimensions and sizes of the 1994-1998 Daihatsu Hijet 660 High Custom High Roof were tailored to meet the needs of commercial users, offering a compact and agile platform with adequate space for both passengers and cargo. These dimensions made it an ideal choice for urban environments and various transportation requirements.

Fuel Tank Capacity

The fuel tank capacity of the 1994-1998 Daihatsu Hijet 660 High Custom High Roof was designed to provide practical range and convenience, particularly for commercial and industrial users who needed a reliable and efficient vehicle for their daily operations.

This model was equipped with a fuel tank that could hold approximately 10.5 US gallons (8.7 UK gallons or 40 liters) of fuel. This capacity allowed the Hijet to cover a considerable distance on a single tank of fuel, making it suitable for both short urban trips and longer journeys without frequent refueling stops.

The choice of a moderate-sized fuel tank was in line with the vehicle's compact design and its emphasis on fuel efficiency. The efficient engine and relatively large fuel tank capacity ensured that owners and operators of the Hijet could benefit from cost-effective operation and reduced downtime for refueling.

For businesses that required regular transportation of goods or passengers, the 1994-1998 Daihatsu Hijet 660 High Custom High Roof's fuel tank capacity provided a balance between fuel range and payload capacity, making it a practical choice for various commercial applications.

Fuel Consumption

The fuel consumption of the 1994-1998 Daihatsu Hijet 660 High Custom High Roof was a standout feature, emphasizing its efficiency and cost-effectiveness as a commercial and utility vehicle. This model was designed to deliver impressive mileage, making it an attractive choice for businesses and individuals seeking economical transportation.

In a 60 km/h mode, the Hijet achieved a remarkable fuel consumption rate of approximately 58.8 miles per gallon in the US, 70.6 miles per gallon in the UK, or 4.0 liters per 100 kilometers in metric terms. These figures highlighted the vehicle's ability to cover significant distances while minimizing fuel expenses.

The efficiency of the Hijet's fuel consumption was a result of several factors. Its compact design and lightweight construction contributed to reduced fuel consumption by minimizing the energy required to move the vehicle. Additionally, the engine's design, which included a 3-cylinder configuration and a 12-valve system, optimized the combustion process for fuel efficiency.

Furthermore, the vehicle's mid-engine placement and aerodynamic design played a role in enhancing its fuel economy. The placement of the engine over the rear wheels provided traction while maintaining balance, ensuring efficient power distribution and minimizing energy loss.

The efficient fuel consumption of the 1994-1998 Daihatsu Hijet 660 High Custom High Roof made it a practical choice for businesses and individuals seeking to minimize operating costs. Whether used for local deliveries, transportation services, or general utility purposes, this model's economical fuel consumption contributed to its reputation for affordability and reliability.

Fuel Capacity

The fuel capacity of the 1994-1998 Daihatsu Hijet 660 High Custom High Roof was designed to strike a balance between range and efficiency, catering to the needs of commercial users who required a dependable and cost-effective vehicle for their daily operations.

This model was equipped with a fuel tank capable of holding approximately 10.5 US gallons (8.7 UK gallons or 40 liters) of fuel. This capacity provided the Hijet with a practical balance between the ability to cover a significant distance on a single tank of fuel and the need for payload capacity.

The choice of a moderate-sized fuel tank was in alignment with the vehicle's compact design and its emphasis on fuel efficiency. The efficient engine, combined with the relatively ample fuel tank capacity, ensured that the Hijet could operate for extended periods without the need for frequent refueling stops.

For businesses and individuals using the 1994-1998 Daihatsu Hijet 660 High Custom High Roof, the fuel capacity offered a practical solution for daily transportation needs. Whether used for deliveries, passenger transport, or various utility tasks, the vehicle's fuel capacity allowed for extended operation between refueling, contributing to its cost-effectiveness and convenience.

Fuel Efficiency (MPG)

The fuel efficiency of the 1994-1998 Daihatsu Hijet 660 High Custom High Roof was a standout feature, highlighting its economical operation and cost-effectiveness. This vehicle was designed to provide impressive miles per gallon (MPG) figures, making it a practical choice for businesses and individuals seeking to minimize fuel expenses.

In a 60 km/h mode, the Hijet achieved a remarkable fuel consumption rate, equivalent to approximately 58.8 miles per gallon in the US, 70.6 miles per gallon in the UK, or 4.0 liters per 100 kilometers in metric terms. These figures underscored the vehicle's ability to cover long distances on a relatively small amount of fuel.

Several factors contributed to the exceptional fuel efficiency of the Hijet. Its compact and lightweight design minimized the energy required for propulsion, making it inherently fuel-efficient. Additionally, the engine's configuration, including a 3-cylinder setup and 12-valve system, optimized combustion for efficient fuel utilization.

The mid-engine placement of the vehicle, combined with its aerodynamic design, further enhanced fuel efficiency. The engine's positioning over the rear wheels provided traction while maintaining balance, ensuring efficient power distribution and reducing energy wastage.

The impressive fuel efficiency of the 1994-1998 Daihatsu Hijet 660 High Custom High Roof made it an economical choice for businesses and individuals with transportation needs. Whether used for local deliveries, passenger transport, or various utility tasks, this model's fuel efficiency helped keep operating costs in check, contributing to its reputation for affordability and reliability.

Wheel Options

The 1994-1998 Daihatsu Hijet 660 High Custom High Roof offered various wheel options to cater to different driving needs and preferences. These wheel options allowed buyers to customize their vehicles to suit specific requirements, whether for urban mobility or more rugged applications.

The standard wheel configuration for this model featured 145 R12-6PRLT tires mounted on aluminum disk rims. These wheels provided a balance of stability and maneuverability, making the Hijet suitable for navigating both city streets and more challenging road conditions. The choice of aluminum disk rims added a touch of style while maintaining overall vehicle weight.

The 145 R12-6PRLT tires were selected to match the compact dimensions and weight of the vehicle. This tire size contributed to the Hijet's responsive handling and ensured that the tires were adequately proportioned to the vehicle's weight and power.

While the standard wheel options were well-suited for typical urban and suburban driving, buyers often had the flexibility to explore additional wheel and tire configurations through aftermarket options. Depending on specific needs, owners could choose to upgrade their tires for enhanced traction, durability, or style.

The availability of various wheel options allowed the 1994-1998 Daihatsu Hijet 660 High Custom High Roof to adapt to diverse driving conditions and requirements, making it a versatile choice for commercial and utility use. Whether equipped with standard wheels or customized with specific tire and rim choices, this model aimed to provide a balanced driving experience tailored to the owner's preferences.

Notable Features and Upgrades

The 1994-1998 Daihatsu Hijet 660 High Custom High Roof introduced several notable features and upgrades that enhanced its appeal and functionality in the commercial and utility vehicle market. These features were designed to cater to the specific needs of businesses and individuals requiring a reliable and adaptable vehicle.

1. Mid-Engine Placement: One of the standout features of the Hijet was its mid-engine layout. Placing the engine between the front and rear axles allowed for better weight distribution and improved traction, enhancing the vehicle's stability, especially when carrying heavy loads.

2. Compact Design: The compact exterior dimensions of the Hijet made it highly maneuverable in urban environments. Its small footprint facilitated easy parking and navigation through narrow streets, making it an ideal choice for city-based businesses.

3. Variety of Trim Levels: The Hijet was available in various trim levels and variants, allowing buyers to select the configuration that best suited their needs. This range of options ensured that businesses could find a Hijet model tailored to their specific requirements, whether for cargo transport, passenger shuttling, or utility tasks.

4. Efficient Fuel Consumption: The model's exceptional fuel efficiency, with approximately 58.8 miles per gallon in the US, 70.6 miles per gallon in the UK, or 4.0 liters per 100 kilometers, was a notable feature. This efficiency helped businesses and individuals minimize operating costs, particularly in industries where fuel expenses were a significant consideration.

5. Rear-Hinged and Sliding Doors: The inclusion of rear-hinged and sliding doors provided convenient access to the interior of the vehicle. These door configurations allowed for easy loading and unloading of cargo and passengers, enhancing practicality and efficiency.

6. Versatile Interior Space: The interior of the Hijet was designed with versatility in mind. Depending on the trim level and variant, owners could configure the interior to accommodate passengers, cargo, or specialized equipment, making it adaptable to a wide range of applications.

7. Reliability and Durability: Daihatsu's reputation for producing durable and reliable vehicles was reflected in the Hijet. Its robust engineering and construction made it a dependable choice for businesses that required a vehicle capable of withstanding daily use and challenging conditions.

8. Customization Options: The Hijet offered customization options, allowing owners to equip their vehicles with accessories and add-ons tailored to their needs. These options included roof racks, toolboxes, and specialized lighting.

9. Cost-Effective Operation: Overall, the 1994-1998 Daihatsu Hijet 660 High Custom High Roof was designed to deliver cost-effective operation. Its efficiency, durability, and adaptability made it a practical choice for a wide range of commercial and utility purposes.

These notable features and upgrades contributed to the appeal and success of the Daihatsu Hijet 660 High Custom High Roof during its production years, solidifying its reputation as a versatile and dependable commercial and utility vehicle.

Performance and Handling

The performance and handling characteristics of the 1994-1998 Daihatsu Hijet 660 High Custom High Roof were tailored to meet the demands of commercial and utility users who required a dependable and maneuverable vehicle. This model's design and engineering focused on delivering a balanced driving experience, optimizing factors like agility and stability.

1. Mid-Engine Placement: A key factor in the Hijet's performance was its mid-engine placement. This layout, with the engine located between the front and rear axles, provided several advantages. It improved weight distribution, contributing to balanced handling and enhanced traction, especially when the vehicle was carrying cargo or passengers.

2. Compact Design: The Hijet's compact exterior dimensions made it highly maneuverable. Its small size was advantageous for navigating congested urban areas, making it an ideal choice for businesses that required a vehicle capable of easily maneuvering through city streets and tight spaces.

3. Suspension and Handling: The front suspension of the Hijet utilized a McPherson strut coil spring design, while the rear suspension featured a rigid axle leaf spring setup. These configurations were chosen for their reliability and durability, enhancing the vehicle's ability to handle varying road conditions.

4. Tire and Wheel Options: The availability of different wheel and tire options allowed buyers to tailor the vehicle's performance to their specific needs. The standard 145 R12-6PRLT tires on aluminum disk rims provided a balance of stability and maneuverability, suitable for a variety of applications.

5. Turning Circle: The Hijet boasted a minimum turning circle or turning diameter of approximately 3.8 meters. This tight turning radius enhanced its maneuverability, allowing it to navigate narrow streets and make sharp turns with ease.

6. Ground Clearance: With a ride height of approximately 16 cm (6.29 inches), the Hijet struck a balance between ground clearance and stability. This clearance was sufficient to handle various road conditions, including uneven terrain.

7. Transmission Options: The availability of both manual and automatic transmissions allowed users to choose the transmission type that best suited their driving preferences and needs, whether for city driving or more specific commercial applications.

8. Cost-Effective Operation: The overall performance and handling characteristics of the 1994-1998 Daihatsu Hijet 660 High Custom High Roof contributed to its reputation for cost-effective operation. Its efficient use of fuel, ease of maneuverability, and adaptability to various tasks made it a practical choice for businesses and individuals seeking reliable transportation for their daily operations.

In summary, the performance and handling attributes of the Hijet were carefully engineered to cater to the needs of commercial and utility users. Its mid-engine layout, compact design, and suspension setup contributed to a balanced and dependable driving experience, making it a versatile and cost-effective choice for a wide range of applications.

Interior and Cargo Space

The interior and cargo space of the 1994-1998 Daihatsu Hijet 660 High Custom High Roof were thoughtfully designed to maximize versatility and practicality. This compact commercial van was engineered to provide a functional and adaptable interior space, catering to the diverse needs of businesses and individuals.

1. Seating Configurations: The interior of the Hijet could be configured to accommodate various seating arrangements based on the trim level and variant. Some models offered seating for up to four occupants, making it suitable for transporting small work teams or passengers. The presence of both rear-hinged and sliding doors ensured convenient access to the interior.

2. Cargo Space: One of the standout features of the Hijet was its ability to serve as a capable cargo transporter. The rear portion of the vehicle could be adapted to carry goods and equipment, making it ideal for businesses engaged in delivery services, trade, or logistics. Depending on the trim level and customization, the cargo area could be tailored to specific needs.

3. Interior Flexibility: The interior of the Hijet was designed with flexibility in mind. Owners had the option to reconfigure the space based on their requirements. This adaptability allowed businesses to use the vehicle for various purposes, from passenger transport to cargo hauling.

4. Practical Utility: The interior featured practical utility elements such as easy-to-clean surfaces, storage compartments, and durable materials. These design considerations were aimed at ensuring that the Hijet could withstand the demands of daily use in various commercial and industrial settings.

5. Accessibility: Accessibility was a key focus, with rear-hinged and sliding doors providing convenient entry and exit points. This feature was particularly valuable for businesses that required frequent loading and unloading of cargo or passenger transport.

6. Customization Options: Depending on the market and dealership, owners could explore customization options to further tailor the interior to their needs. Accessories such as roof racks, toolboxes, and specialized storage solutions were available to enhance functionality.

7. Driver Comfort: While the emphasis was on practicality, driver comfort was not overlooked. Depending on the trim level, features such as power steering and other comfort options were available, making the driving experience more pleasant for those spending long hours behind the wheel.

In summary, the 1994-1998 Daihatsu Hijet 660 High Custom High Roof offered a versatile interior and cargo space that catered to a wide range of commercial and utility needs. Whether used for passenger transport, cargo hauling, or specialized applications, its adaptability and functionality made it a dependable choice for businesses and individuals seeking a compact and practical commercial van.

Maintenance and Reliability

Maintenance and reliability were key considerations in the design and engineering of the 1994-1998 Daihatsu Hijet 660 High Custom High Roof. This commercial van was crafted to offer dependable performance while minimizing downtime and operating costs for businesses and individuals alike.

1. Routine Maintenance: The Hijet's maintenance requirements were designed to be straightforward and cost-effective. Routine tasks such as oil changes, filter replacements, and brake inspections were relatively simple and could be performed without extensive downtime.

2. Durable Construction: The Hijet was built with durability in mind. Its robust construction and materials were selected to withstand the demands of daily use in various commercial and industrial settings. This durability extended to the vehicle's chassis, suspension components, and drivetrain.

3. Dependable Engine: The Hijet's engine, available in both automatic (EF-ZS) and manual (EF-GS) transmissions, was engineered for reliability. Regular maintenance and adherence to recommended service intervals helped ensure that the engine delivered consistent performance over the years.

4. Accessibility for Repairs: Accessibility to key components for maintenance and repairs was a consideration in the vehicle's design. This made it easier for mechanics to access critical areas when conducting servicing, reducing the time and effort required for maintenance tasks.

5. Reliable Transmission Options: Both the automatic and manual transmission options were designed to withstand daily use and deliver dependable performance. Proper care and maintenance of the transmission systems contributed to their long-term reliability.

6. Cost-Effective Operation: The emphasis on reliability and ease of maintenance contributed to the Hijet's reputation for cost-effective operation. Businesses and individuals could rely on the vehicle to perform consistently while minimizing unexpected repair expenses.

7. Dealer Support: Daihatsu's dealership network and support infrastructure played a role in maintaining the reliability of the Hijet. Owners had access to service centers staffed by trained technicians who could address maintenance and repair needs efficiently.

8. Longevity: Many Hijet models from this era demonstrated impressive longevity, remaining on the road for extended periods. Proper care and regular maintenance were key factors in ensuring the vehicle's extended service life.

In summary, the 1994-1998 Daihatsu Hijet 660 High Custom High Roof was engineered to provide maintenance-friendly reliability. Its durability, dependable engine options, and accessible design elements contributed to its reputation as a trustworthy and cost-effective commercial van. Businesses and individuals could rely on the Hijet to deliver consistent performance while minimizing the hassles associated with maintenance and repairs.

Conclusion and Overall Assessment

In conclusion, the 1994-1998 Daihatsu Hijet 660 High Custom High Roof demonstrated its value as a versatile and dependable commercial and utility vehicle. Throughout its production years, this model showcased a range of features and characteristics that appealed to businesses and individuals with diverse transportation needs.

With its mid-engine placement, compact design, and efficient fuel consumption, the Hijet offered agility and cost-effectiveness in urban settings. It navigated city streets with ease, making it an ideal choice for businesses engaged in local deliveries and passenger transport.

The Hijet's adaptability was a significant advantage, with various trim levels and interior configurations catering to a wide range of applications. Whether used for cargo transport, passenger shuttling, or specialized utility tasks, this model provided practical solutions.

Notable features such as rear-hinged and sliding doors, customizable interior spaces, and a focus on durability and reliability further enhanced its appeal. Businesses could rely on the Hijet to perform consistently, contributing to cost-effective operation and minimizing downtime.

Maintenance and service considerations were also taken into account, with an emphasis on ease of maintenance and accessibility for repairs. These factors contributed to the vehicle's longevity and dependable performance.

Overall, the 1994-1998 Daihatsu Hijet 660 High Custom High Roof earned its reputation as a reliable and adaptable commercial van. Its balance of performance, efficiency, and functionality made it a practical choice for a wide range of industries and tasks, from small businesses to larger enterprises. Throughout its production years, the Hijet demonstrated its commitment to meeting the transportation needs of businesses and individuals, solidifying its place as a dependable workhorse in the automotive landscape.

Frequently Asked Questions About the 1994-1998 Daihatsu Hijet 660 High Custom High Roof