1991 Honda Acty 660 PRO-B Specs

OVERVIEW

With a fuel consumption of 44.3 mpg US - 53.2 mpg UK - 5.3 L/100km, a weight of 1829 lbs (830 kg), the Honda Acty 660 PRO-B has a water cooling 3 cylinder horizontal range engine, a Regular gasoline engine E07A. This engine E07A produces a maximum power of 38.5 PS (38 bhp - 28.3 kW) at 5300 rpm and a maximum torque of 53.9 Nm (39.7 lb.ft - 5.5 kg.m) at 4500 rpm. The engine power is transmitted to the road by the four wheel drive (4WD) with a 5MT gearbox. For stopping power, the Honda Acty 660 PRO-B braking system includes Leading trailing drum brake at the rear and Disk at the front. Chassis details - Honda Acty 660 PRO-B has De-Dion type rear suspension and McPherson independent front suspension for road holding and ride confort.

Add to compare list

- Present
- Option
- Not Present (or Dealer Option)

• Search Car Specs
• Other Acty Specs Database

By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on April 18, 2024

Introduction

The 1991-1994 Honda Acty 660 PRO-B marks an era of compact versatility within the automotive landscape. With its production spanning from August 1991 to September 1994, this commercial van left an indelible mark on its segment. Designed for the demands of city life and tight spaces, it proudly showcased a 4WD drivetrain that added traction and stability, enhancing its maneuverability in various conditions.

The Acty 660 PRO-B stood out with its compact dimensions. At an exterior length of 329.5 cm and an exterior width of 139.5 cm, it managed to navigate urban streets and confined spaces with ease. Its modest height of 188 cm and a wheelbase of 190 cm contributed to its agility, while the ride height of 19.5 cm ensured that it was capable of handling varied terrains without compromise.

Powered by the E07A engine, the Acty 660 PRO-B boasted 38.5 PS of power, generated at 5300 rpm, and 53.9 Nm of torque at 4500 rpm. This water-cooled 3-cylinder engine, coupled with a 5-speed manual transmission, delivered efficient performance for both city commutes and cargo hauling.

The interior of the Acty 660 PRO-B embraced simplicity and functionality. With seating for two, it prioritized practicality over excess. While power windows and power steering were absent, its ergonomic design and thoughtfully laid-out controls catered to the needs of its users.

On the safety front, the Acty 660 PRO-B was fitted with a basic setup. Although drivers and passengers were without airbags, the sturdy build and a lack of unnecessary features exemplified the Acty's dedication to fundamental reliability.

This period of the Acty's production saw it emerge as a stalwart companion for urban entrepreneurs and small businesses, embodying Honda's commitment to engineering vehicles tailored for specific needs. The Acty 660 PRO-B's distinctive dimensions, functional interior, and practical performance encapsulate the essence of a purpose-driven commercial vehicle.

As the automotive industry advanced and evolved, the Acty 660 PRO-B remains a testament to an era when form and function harmonized seamlessly, resulting in a vehicle that stood as a dependable partner in the bustling world of urban commerce.

Overview of Model Years

Spanning from 1991 to 1994, the Honda Acty 660 PRO-B series encapsulates a chapter of automotive history that emphasized practicality and adaptability. Positioned as a commercial van, this model was tailored to meet the demands of urban environments and small-scale businesses.

During these years, the Acty 660 PRO-B underwent subtle refinements that aimed to enhance its usability and reliability. While the exterior dimensions remained compact, the updates were concentrated on refining its core attributes. The introduction of a 4WD drivetrain ensured superior traction and stability, enabling the Acty to navigate a variety of terrains with confidence.

Engineered to accommodate different hauling needs, the Acty 660 PRO-B provided a versatile platform for transporting goods within the confines of a bustling city. With a focus on efficiency and functionality, this model catered to businesses that required a nimble yet capable workhorse.

The inclusion of a 5-speed manual transmission empowered drivers with control over power delivery, contributing to the Acty's reputation for adaptability in urban settings. Whether it was navigating tight alleyways or maneuvering through crowded streets, the Acty's engineering prioritized practicality and ease of use.

The Acty 660 PRO-B's legacy lies in its ability to offer a reliable solution for businesses seeking a compact vehicle capable of handling everyday tasks. While the updates between 1991 and 1994 might not have been revolutionary, they underscore Honda's commitment to refining and optimizing their vehicles to meet the evolving needs of the market.

As this series progressed through its production years, the Acty 660 PRO-B remained a steadfast companion for those who relied on its utilitarian design. The attention to detail and incremental improvements during these years demonstrate Honda's dedication to delivering dependable vehicles that contribute to the success of businesses both big and small.

Engine Variants

The 1991-1994 Honda Acty 660 PRO-B presented a modest yet purposeful range of engine variants designed to complement its utilitarian nature. This series was equipped with the E07A engine, which played a crucial role in delivering the performance and efficiency required for its intended commercial and urban applications.

The E07A engine, a water-cooled 3-cylinder powerplant, served as the heart of the Acty 660 PRO-B. Despite its compact displacement of 656 cm³, this engine showcased Honda's commitment to optimizing power delivery and fuel efficiency. With a maximum power output of 38.5 PS at 5300 rpm and a peak torque of 53.9 Nm at 4500 rpm, the E07A engine demonstrated the balance between performance and practicality that defined this series.

While the E07A engine provided the Acty 660 PRO-B with adequate power for its intended tasks, it also prioritized fuel economy. The engine's ability to strike a harmonious balance between power and efficiency allowed the Acty to navigate city streets while conserving fuel—a vital attribute for businesses aiming to optimize operating costs.

The focus on the E07A engine as the sole powerplant for the Acty 660 PRO-B highlighted Honda's strategy of specialization. By tailoring the engine to the specific needs of this commercial van, Honda ensured that the Acty would excel in its intended role of a compact and reliable urban workhorse.

During the 1991-1994 period, the E07A engine remained a constant, representing a commitment to consistency and reliability. While it might not have been a range of diverse engine options, the E07A engine's engineering and performance capabilities aligned perfectly with the Acty 660 PRO-B's utilitarian ethos, delivering dependable power for everyday tasks.

Engine Performance

The 1991-1994 Honda Acty 660 PRO-B made its mark as a compact commercial van that focused on delivering reliable and practical engine performance. At the heart of this model series was the E07A engine, a three-cylinder powerplant designed with the dual goals of efficiency and functionality in mind.

With a maximum power output of 38.5 PS and a peak torque of 53.9 Nm, the E07A engine provided the Acty 660 PRO-B with the necessary power to navigate urban environments and carry out its intended commercial duties. Its power delivery, optimized for city driving, allowed the Acty to swiftly maneuver through traffic and handle tight corners with ease.

The performance characteristics of the E07A engine were thoughtfully tailored to match the Acty's compact dimensions and intended applications. Its power output, though modest, was perfectly suited for the vehicle's role as a practical workhorse, enabling it to carry out deliveries, transport goods, and navigate crowded city streets without compromise.

While the Acty 660 PRO-B was not designed for high-speed driving or demanding performance scenarios, its engine performance struck a balance between power and efficiency. The engine's capabilities were in harmony with the model's utilitarian nature, ensuring that it could handle the demands of urban business operations without excessive fuel consumption.

In conclusion, the engine performance of the 1991-1994 Honda Acty 660 PRO-B demonstrated a purposeful approach to power delivery. The E07A engine, while not designed for exhilarating acceleration, provided reliable and efficient performance that aligned perfectly with the model's intended applications. As a result, the Acty 660 PRO-B offered dependable power for everyday tasks, reflecting Honda's commitment to practicality and functionality.

Fuel Efficiency

The 1991-1994 Honda Acty 660 PRO-B prioritized fuel efficiency as a key element of its design, aligning with its role as a practical urban workhorse. Fitted with the E07A engine, this commercial van was engineered to deliver economical fuel consumption, catering to businesses and drivers who sought to minimize operating costs.

The E07A engine's design and tuning were geared towards achieving impressive fuel efficiency figures. With a focus on city driving scenarios, where stop-and-go traffic and short trips are common, the Acty 660 PRO-B was optimized to conserve fuel during urban commutes. This attention to efficiency was a reflection of Honda's dedication to engineering vehicles that not only met practical needs but also demonstrated environmental responsibility.

The Acty 660 PRO-B's fuel efficiency was particularly notable during city driving, where its compact size and nimble handling contributed to its ability to conserve fuel. The engine's power delivery and torque characteristics were fine-tuned to align with city traffic patterns, allowing the Acty to operate efficiently even in congested areas.

This dedication to fuel efficiency made the Acty 660 PRO-B an ideal partner for small-scale businesses and urban delivery operations. By minimizing fuel consumption, the Acty helped businesses maximize their profitability while also contributing to reduced carbon emissions—a testament to Honda's commitment to sustainable transportation solutions.

In summary, the 1991-1994 Honda Acty 660 PRO-B showcased an unwavering commitment to fuel efficiency. Through the engineering of its E07A engine and its purpose-driven design, this model series exemplified the balance between practicality, performance, and responsible resource utilization. As a result, the Acty 660 PRO-B not only delivered reliable performance but also demonstrated Honda's dedication to producing vehicles that were economically and environmentally conscientious.

Dimensions and Sizes

The 1991-1994 Honda Acty 660 PRO-B was designed with compact dimensions that catered to the demands of urban environments and small-scale businesses. Its sizing and proportions were thoughtfully crafted to ensure maneuverability, ease of parking, and efficient cargo transport within tight city spaces.

Measuring at 329.5 cm in length and 139.5 cm in width, the Acty 660 PRO-B showcased its compact nature, allowing it to navigate through congested streets with agility. Its exterior height of 188 cm contributed to its efficient vertical space utilization, while the wheelbase of 190 cm facilitated stability and smooth handling.

The Acty's ride height, standing at 19.5 cm, provided a balance between ground clearance and accessibility. This dimension ensured that the vehicle could traverse varying terrains without compromising its practicality and maneuverability in urban settings.

Weighing in at 830 kg, the Acty 660 PRO-B boasted a lightweight construction that further enhanced its nimbleness. This weight was a deliberate choice, allowing the vehicle to balance its cargo-carrying capabilities with efficient fuel consumption and manageable handling.

The Acty's dimensions also extended to its seating and door configurations. With seating for two occupants and five doors, including sliding side doors for easy cargo access, the Acty prioritized functionality without compromising on its compact footprint.

In conclusion, the 1991-1994 Honda Acty 660 PRO-B's dimensions and sizes embodied the ethos of practicality and versatility. Its compact exterior, coupled with well-designed interior space utilization, showcased Honda's dedication to delivering a commercial van that excelled in urban landscapes. Whether navigating narrow streets, making deliveries, or carrying out daily business tasks, the Acty's dimensions were purposefully aligned with its intended role as a capable and efficient urban workhorse.

Wheel Configurations

The 1991-1994 Honda Acty 660 PRO-B exhibited a wheel configuration that contributed to its nimble handling and practicality within urban environments. The carefully chosen wheel dimensions and setup underscored its design focus on maneuverability and stability in varying driving conditions.

The Acty 660 PRO-B featured wheels with dimensions of 5.00-12-4PR ULT, a specification tailored to support its compact stature and cargo-carrying capabilities. These wheels struck a balance between size and strength, ensuring that the Acty could handle the demands of city driving while maintaining stability and load-bearing capacity.

The wheel configuration played a significant role in the Acty's ability to navigate tight corners, negotiate crowded streets, and effectively park in confined spaces. By choosing a wheel setup that aligned with the vehicle's proportions, Honda enhanced the Acty's agility, making it an ideal choice for businesses that required frequent stops and starts in urban settings.

In terms of design, the Acty's wheels contributed to its functional aesthetic, complementing its compact body while emphasizing its utilitarian purpose. The wheel dimensions, combined with the vehicle's suspension and handling characteristics, resulted in a dependable and responsive driving experience that catered to the Acty's intended role as a practical urban workhorse.

To summarize, the wheel configurations of the 1991-1994 Honda Acty 660 PRO-B were thoughtfully selected to support its maneuverability, stability, and load-carrying capabilities. By choosing appropriate wheel dimensions, Honda enhanced the Acty's performance within urban environments, ensuring that it could effectively meet the demands of businesses seeking a reliable and adaptable commercial van.

Trim Levels and Generations

The 1991-1994 Honda Acty 660 PRO-B was available in a single trim level, catering to the specific needs of urban businesses and small-scale entrepreneurs. While it did not encompass a range of trim levels or generations, the Acty 660 PRO-B's singular focus highlighted Honda's dedication to providing a purpose-built vehicle that addressed the demands of its target market.

During its production years, the Acty 660 PRO-B retained its core attributes, including its compact dimensions, efficient engine, and utilitarian design. This singular approach to the model's configuration was a reflection of Honda's commitment to consistency and reliability, ensuring that businesses seeking a reliable urban workhorse could rely on the Acty's dependable performance.

By maintaining a single trim level and generation, Honda established a clear identity for the Acty 660 PRO-B. This approach emphasized the model's functional nature, highlighting its suitability for urban delivery tasks, cargo transport, and small-scale commercial applications.

While some vehicles might offer multiple trim levels to cater to various preferences and needs, the Acty's singular focus allowed it to stand as a steadfast solution for businesses that valued practicality and efficiency above all else. The absence of multiple trim levels did not detract from its value; instead, it reinforced the Acty's reputation as a reliable and dependable commercial van designed to excel in urban environments.

In summary, the 1991-1994 Honda Acty 660 PRO-B maintained a consistent trim level and generation throughout its production years. This singular approach reflected Honda's commitment to providing businesses with a reliable and practical solution for their urban transportation needs, underlining the Acty's role as a dependable partner in the realm of commercial vehicles.

Fuel Tank Capacity

The 1991-1994 Honda Acty 660 PRO-B came equipped with a fuel tank that underscored its focus on efficiency and practicality. With a fuel tank capacity of 9.7 US gallons (8.1 UK gallons or 37 liters), the Acty showcased its dedication to providing ample range while also ensuring the vehicle's compact size and weight were balanced with its fuel carrying capabilities.

This fuel tank capacity was thoughtfully chosen to cater to the Acty's intended urban and commercial applications. The Acty's compact dimensions and efficient engine performance were complemented by a fuel tank that enabled it to cover considerable distances before needing refueling, making it suitable for businesses with frequent stop-and-go operations within city limits.

The fuel tank capacity of the Acty 660 PRO-B also aligned with its emphasis on minimizing downtime due to refueling. This was a crucial factor for businesses that relied on timely deliveries and consistent operations. By providing a fuel tank that struck a balance between size and capacity, Honda ensured that the Acty could effectively fulfill its role as a practical and efficient urban workhorse.

In summary, the 1991-1994 Honda Acty 660 PRO-B's fuel tank capacity of 9.7 US gallons (8.1 UK gallons or 37 liters) was a testament to its practicality and consideration for the needs of businesses in urban environments. This capacity allowed the Acty to combine efficient fuel consumption with a respectable range, showcasing Honda's commitment to engineering vehicles that excel in real-world commercial scenarios.

Fuel Consumption Figures

The 1991-1994 Honda Acty 660 PRO-B was designed with a keen emphasis on fuel efficiency, aligning with its role as an urban-centric workhorse. Its fuel consumption figures showcased its ability to navigate city streets while keeping fuel costs in check, making it an appealing choice for businesses that valued economical operations.

The Acty 660 PRO-B, powered by the E07A engine, demonstrated impressive fuel consumption figures of 44.3 mpg US (53.2 mpg UK or 5.3 L/100km) under the 60 km/h mode. This efficiency was a result of Honda's meticulous engineering, which optimized the engine's power delivery and performance characteristics to suit the demands of urban driving.

The Acty's fuel consumption figures were indicative of its ability to navigate stop-and-go traffic and frequent starts and stops commonly encountered in city environments. By delivering efficient fuel usage, the Acty catered to businesses that sought to minimize operating costs while maintaining dependable performance.

The model's focus on fuel efficiency was a reflection of Honda's commitment to sustainability and practicality. The Acty's ability to achieve such impressive fuel consumption figures underscored its dedication to delivering vehicles that not only met the demands of business operations but also contributed to reduced environmental impact.

In summary, the 1991-1994 Honda Acty 660 PRO-B's fuel consumption figures highlighted its role as an economical and sustainable urban workhorse. By delivering efficient fuel usage without compromising practicality, the Acty showcased Honda's ability to engineer vehicles that excel in both commercial performance and responsible resource utilization.

Conclusion

The 1991-1994 Honda Acty 660 PRO-B stands as a testament to Honda's dedication to producing practical and efficient vehicles tailored for urban business needs. With its compact dimensions, agile handling, and purposeful engine performance, this model series epitomizes the essence of a reliable and adaptable commercial van.

Through its singular trim level and generation, the Acty 660 PRO-B maintained a consistent identity that prioritized functionality and reliability. Its fuel-efficient engine, efficient fuel consumption figures, and thoughtfully designed dimensions all contribute to its suitability for navigating bustling city streets and fulfilling the demands of small-scale businesses.

The Acty's focus on efficiency and practicality extended to its interior and exterior features. While lacking certain modern amenities, it delivered essential features that catered to its utilitarian purpose, ensuring that businesses could rely on its dependable performance day in and day out.

In conclusion, the 1991-1994 Honda Acty 660 PRO-B embodies the concept of a compact urban workhorse. With its targeted engineering, efficient powerplant, and purpose-driven design, the Acty showcases Honda's commitment to delivering vehicles that excel in real-world commercial scenarios. As a reliable partner for businesses seeking a practical and dependable solution, the Acty 660 PRO-B leaves an enduring legacy in the realm of compact commercial vehicles.

FAQ: Unveiling Key Details of the 1991-1994 Honda Acty 660 PRO-B