2001 Honda Acty 660 PRO-B Specs

OVERVIEW

With a fuel consumption of 39.2 mpg US - 47 mpg UK - 6.0 L/100km, a weight of 1984 lbs (900 kg), the Honda Acty 660 PRO-B has a water cooling 3 cylinder horizontal range SOHC engine, a Regular gasoline engine E07Z. This engine E07Z produces a maximum power of 46.6 PS (46 bhp - 34.3 kW) at 5500 rpm and a maximum torque of 58.8 Nm (43.3 lb.ft - 6 kg.m) at 5000 rpm. The engine power is transmitted to the road by the rear wheel drive (MID) with a 5MT gearbox. For stopping power, the Honda Acty 660 PRO-B braking system includes fluid drum brake at the rear and hydraulic disk at the front. Chassis details - Honda Acty 660 PRO-B has De-Dion type rear suspension and McPherson front suspension for road holding and ride confort.

Add to compare list

- Present
- Option
- Not Present (or Dealer Option)

• Search Car Specs
• Other Acty Specs Database

More photos Honda Acty

By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on April 24, 2024

Introduction to the 2001-2003 Honda Acty 660 PRO-B

The 2001-2003 Honda Acty 660 PRO-B was a compact commercial van that found its niche in urban environments and small-scale cargo transport. This vehicle, produced from September 2001 to March 2003, was designed to offer practicality and efficiency for various business needs.

One of the notable features of the Acty 660 PRO-B was its mid-traction drivetrain, providing stable handling characteristics, especially useful in tight city streets. With a body type classified as a commercial van, it catered to the demands of urban businesses and delivery services.

Under the hood, the Acty 660 PRO-B housed a 656 cm3 engine, delivering a maximum power output of 46.6 PS (46 bhp) at 5500 rpm and a torque of 58.8 Nm (43.3 lb.ft) at 5000 rpm. This compact, water-cooled, 3-cylinder engine operated on regular gasoline, aligning with Honda's LEV (Low Emission Vehicle) standards.

In terms of size, the Acty 660 PRO-B had an exterior length of 339.5 cm (133.66 inches), a width of 147.5 cm (58.07 inches), and a height of 188 cm (74.01 inches). The wheelbase measured 242 cm (95.27 inches), while its minimum turning circle was just 4.5 meters.

Inside the van, you'd find seating for two, with two doors for easy access. The vehicle boasted a ground clearance of 19 cm (7.48 inches) and weighed approximately 900 kg (1984 lbs).

Fuel efficiency was a key selling point, with a fuel consumption rating of 39.2 mpg US (47 mpg UK or 6.0 L/100km) in the 10/15 mode test.

The Acty 660 PRO-B featured a simple yet functional interior, with standard amenities that met the practical needs of commercial users. Safety features included a driver's airbag as standard, with the option of a passenger airbag. Side impact bars were also a standard safety feature.

Overall, the 2001-2003 Honda Acty 660 PRO-B served as a reliable and efficient workhorse for businesses requiring a compact and maneuverable van for their daily operations. Its blend of size, engine performance, and fuel efficiency made it a suitable choice for navigating city streets while carrying out various commercial tasks.

Engine Types and Powertrains

The 2001-2003 Honda Acty 660 PRO-B offered a choice of engine types and powertrains, providing versatility to cater to different preferences and needs.

Under the hood of this compact commercial van, you could find a 656 cm3 engine known by its code, E07Z. This engine featured a water-cooled, 3-cylinder, horizontal range Single Overhead Camshaft (SOHC) configuration. Despite its modest size, it delivered a respectable maximum power output of 46.6 PS (46 bhp) at 5500 rpm and a torque of 58.8 Nm (43.3 lb.ft) at 5000 rpm. This engine was designed for efficiency and reliability, aligning with Honda's reputation for quality.

The Acty 660 PRO-B came equipped with a 5-speed manual transmission gearbox, which allowed for smooth and precise gear changes. This manual transmission provided drivers with a level of control over the vehicle's power delivery, particularly useful for those navigating city streets and busy urban environments.

The mid-traction drivetrain layout of the Acty 660 PRO-B contributed to its stability and handling, making it a suitable choice for urban driving conditions. Whether maneuvering through tight corners or dealing with stop-and-go traffic, the vehicle's drivetrain offered an advantage in terms of control and traction.

Overall, the 2001-2003 Honda Acty 660 PRO-B's engine types and powertrain options emphasized reliability, efficiency, and practicality. Whether it was used for delivery services, small-scale cargo transport, or other commercial applications, this vehicle provided a well-rounded package for businesses seeking a dependable workhorse.

Dimensions and Sizes

The 2001-2003 Honda Acty 660 PRO-B was designed with compact dimensions that made it ideal for navigating through tight city streets and efficiently carrying out commercial tasks.

With an exterior length of 339.5 cm (133.66 inches), the Acty 660 PRO-B maintained a relatively short profile. This length allowed for easy maneuverability and parking in urban environments, which was essential for businesses that relied on this vehicle for deliveries and transportation.

The width of the Acty 660 PRO-B measured 147.5 cm (58.07 inches), contributing to its nimble handling and ability to slip through narrow gaps in traffic. This compact width made it suitable for congested city streets, where space was often limited.

Standing at an exterior height of 188 cm (74.01 inches), the Acty 660 PRO-B offered ample headroom inside the cabin while remaining within a compact overall profile. This height accommodated various cargo needs and ensured a comfortable driving experience for commercial users.

The van featured a wheelbase of 242 cm (95.27 inches), providing stability and balance, especially when carrying cargo. A shorter wheelbase made the vehicle agile, while still offering sufficient load-bearing capacity.

Ground clearance, an important consideration for city driving, was set at 19 cm (7.48 inches). This clearance allowed the Acty 660 PRO-B to clear common urban road obstacles and uneven surfaces without issue.

With a weight of approximately 900 kg (1984 lbs), the Acty 660 PRO-B was relatively lightweight, contributing to its fuel efficiency and maneuverability. It could efficiently transport cargo while minimizing operational costs.

The Acty 660 PRO-B offered seating for two occupants and featured five doors, ensuring easy access to both the cabin and cargo area. This design was well-suited for commercial use, where quick loading and unloading were essential.

In summary, the 2001-2003 Honda Acty 660 PRO-B's dimensions and sizes emphasized its suitability for urban driving and commercial applications. Its compact exterior dimensions, combined with a spacious interior and practical cargo capabilities, made it a versatile choice for businesses seeking a reliable and efficient vehicle for their daily operations.

Fuel Tank Capacity

The fuel tank capacity of the 2001-2003 Honda Acty 660 PRO-B was designed to meet the practical requirements of its users. This compact commercial van featured a fuel tank with a capacity of 9.7 US gallons, which is equivalent to approximately 8.1 UK gallons or 37 liters.

This fuel tank size was well-suited for the Acty 660 PRO-B's intended purpose as a city-friendly commercial vehicle. With its efficient engine and compact dimensions, the vehicle could cover a significant distance on a single tank of fuel, making it cost-effective for businesses that relied on it for daily operations, such as deliveries and small-scale cargo transport.

The combination of a modest fuel tank capacity and the Acty 660 PRO-B's fuel-efficient engine contributed to its reputation for economical operation. This characteristic was especially valuable for businesses seeking to minimize fuel expenses while maintaining reliable transportation for their commercial needs.

In summary, the 2001-2003 Honda Acty 660 PRO-B's fuel tank capacity of 9.7 US gallons (8.1 UK gallons or 37 liters) was well-matched to its compact size and efficient engine, making it a practical choice for businesses looking to balance fuel economy and cargo-carrying capabilities in urban environments.

Fuel Consumption and MPG

The 2001-2003 Honda Acty 660 PRO-B was known for its impressive fuel efficiency and economical operation, making it a practical choice for businesses operating in urban environments where fuel costs could significantly impact the bottom line.

In standardized fuel consumption tests, the Acty 660 PRO-B delivered noteworthy results. In the 10/15 mode test, it achieved a fuel consumption rating of approximately 39.2 mpg in the United States, which is equivalent to around 47 mpg in the United Kingdom or 6.0 liters per 100 kilometers.

These fuel consumption figures highlighted the Acty 660 PRO-B's ability to cover long distances on a minimal amount of fuel. This was a key advantage for businesses that relied on this compact commercial van for daily deliveries, as it allowed them to reduce fuel expenses while maintaining efficient transportation services.

The Acty 660 PRO-B's fuel efficiency was attributed to several factors, including its lightweight design, aerodynamic profile, and the use of a compact, yet capable, engine. These elements combined to create a vehicle that excelled in minimizing fuel consumption, which was particularly valuable in urban areas with congested traffic and frequent stops.

Overall, the 2001-2003 Honda Acty 660 PRO-B's fuel consumption and impressive miles per gallon (MPG) ratings made it a cost-effective choice for businesses looking to optimize their operational expenses while ensuring reliable transportation for their commercial needs.

Wheel Options

The 2001-2003 Honda Acty 660 PRO-B, despite its compact size and commercial focus, offered a range of wheel options to cater to different needs and preferences. Wheel options can significantly impact a vehicle's appearance and handling characteristics, providing users with some customization choices.

Typically, the Acty 660 PRO-B came equipped with standard 145 R12-8PR LT tires. These tires were well-suited for urban driving and offered a balance between load-bearing capacity and maneuverability. They contributed to the van's stability and control on city streets, making it a reliable choice for businesses relying on the vehicle for deliveries and transport in congested areas.

While the standard wheel options provided efficient and practical performance, some users might have chosen to upgrade or customize their wheels to enhance the van's appearance or specific handling characteristics. However, the availability of alternative wheel options may vary depending on the market and specific trim levels.

Overall, the wheel options for the 2001-2003 Honda Acty 660 PRO-B were designed to complement its intended use as a compact commercial van. The standard wheels provided a good balance of performance and efficiency for urban driving, while potential upgrades allowed for some degree of personalization and customization.

Trim Levels and Variants

The 2001-2003 Honda Acty 660 PRO-B was available in several trim levels and variants, offering users a degree of choice when it came to selecting a configuration that best suited their specific needs and preferences.

These trim levels and variants typically varied in terms of features and options, allowing businesses and users to tailor the Acty 660 PRO-B to their requirements. While specific details about trim levels and variants may vary by market and region, here's a general overview of what one might expect:

1. Base Model: The base model of the Acty 660 PRO-B typically offered essential features and a straightforward configuration. It was designed for practicality and cost-effectiveness, making it a popular choice for businesses with budget constraints.

2. Mid-Level Trims: Some variants of the Acty 660 PRO-B might have included mid-level trims with additional features and amenities. These trims could include upgrades such as power accessories, improved interior materials, or enhanced comfort features.

3. High-End Trims: In certain markets, high-end trims of the Acty 660 PRO-B might have been available, providing users with a more premium experience. These trims could feature advanced technology, safety enhancements, and upgraded interior appointments.

4. Cargo and Passenger Variants: The Acty 660 PRO-B was versatile, and in addition to cargo-oriented configurations, it could also be found in passenger variants. These variants might have included rear seating and additional interior space, catering to businesses or individuals with diverse transportation needs.

5. Special Editions: From time to time, Honda might have released special edition variants of the Acty 660 PRO-B, which could feature unique styling elements, exclusive color options, or limited-edition badges.

It's important to note that the availability of specific trim levels and variants may have varied by region and market, and the exact features and configurations of each trim level would depend on the manufacturer's offerings during the production period.

These trim levels and variants allowed users to select an Acty 660 PRO-B that aligned with their intended use, whether it was for commercial purposes, personal transportation, or specific preferences regarding features and amenities.

Generational Changes

The 2001-2003 Honda Acty 660 PRO-B experienced several generational changes during its production, with each iteration aimed at improving performance, efficiency, and overall user experience.

While precise details of these generational changes may vary, here's a general overview of the evolutionary improvements made to the Acty 660 PRO-B during this period:

1. Introduction of New Engine: One of the key generational changes might have involved the introduction of a new and more efficient engine. Honda continually worked on engine technology to enhance fuel efficiency and reduce emissions, aligning with evolving environmental standards.

2. Safety Enhancements: Over the years, safety features in vehicles improved, and the Acty 660 PRO-B would have likely seen generational updates in this area. This might include the addition of advanced safety technologies, reinforced structures, or enhanced crash protection.

3. Interior and Comfort Upgrades: Honda often focused on enhancing the interior comfort and convenience of their vehicles. Generational changes might have brought improvements such as upgraded materials, better ergonomics, and advanced infotainment systems.

4. Exterior Styling Revisions: The exterior design of the Acty 660 PRO-B could have undergone changes to keep the vehicle visually appealing and in line with contemporary automotive design trends. This might include updates to the front grille, lighting, and bodywork.

5. Efficiency and Emissions Compliance: As environmental concerns and regulations evolved, Honda would have made generational changes to ensure the Acty 660 PRO-B met or exceeded emission standards while improving overall fuel efficiency.

6. Technological Advancements: Honda often incorporated technological advancements into their vehicles. Generational changes might have included updates to the vehicle's electronics, including entertainment systems, connectivity options, and advanced driver-assistance features.

7. Suspension and Handling: Improvements in suspension and handling could have been part of generational changes. These updates would contribute to better ride comfort and stability, especially important for a commercial van used in urban environments.

8. Transmission and Gearbox: Changes in the transmission and gearbox technology might have occurred to enhance shifting precision and improve overall driving experience, including better fuel efficiency.

It's important to note that specific generational changes would depend on Honda's engineering decisions and market demands during the production period. As Honda continuously improved and refined its vehicles, the Acty 660 PRO-B would have benefited from these generational updates to remain competitive and meet the evolving needs of its users.

Performance and Handling

The 2001-2003 Honda Acty 660 PRO-B was engineered to deliver reliable performance and nimble handling, well-suited for urban driving and commercial applications.

Engine Performance: The Acty 660 PRO-B was powered by a 656 cm3 engine known for its efficiency and reliability. With a maximum power output of 46.6 PS (46 bhp) and a torque of 58.8 Nm (43.3 lb.ft), this compact engine provided adequate power for city driving and cargo transport. The engine's design and engineering prioritized fuel efficiency, which was essential for businesses seeking to minimize operational costs.

Transmission: Equipped with a 5-speed manual transmission, the Acty 660 PRO-B offered precise control over gear changes. This feature was particularly valuable when navigating through traffic or maneuvering in tight spaces, allowing for smooth acceleration and efficient power delivery.

Drivetrain: The van featured a mid-traction drivetrain layout, providing stability and balanced handling. This drivetrain configuration enhanced the vehicle's ability to navigate city streets with confidence, especially during cornering and sudden stops.

Suspension: The Acty 660 PRO-B likely featured a suspension system designed to balance ride comfort and handling stability. Components such as MacPherson front suspension and a De-Dion type rear suspension contributed to a smooth ride and confident handling.

Turning Radius: With a minimum turning circle of approximately 4.5 meters, the Acty 660 PRO-B could execute sharp turns with ease. This capability was valuable for making tight U-turns and maneuvering in narrow urban environments.

Ground Clearance: The van boasted a ground clearance of 19 cm (7.48 inches), striking a balance between negotiating road obstacles and maintaining stable handling.

Weight: Weighing around 900 kg (1984 lbs), the Acty 660 PRO-B was relatively lightweight. This characteristic enhanced its fuel efficiency and contributed to agile handling.

Braking: The vehicle featured hydraulic disc front brakes and fluid drum rear brakes. This braking system offered responsive and effective stopping power, ensuring safety during urban driving and cargo transport.

Tire Options: While standard tires were typically 145 R12-8PR LT, users might have the option to select alternative tire configurations based on their specific needs and preferences.

In summary, the 2001-2003 Honda Acty 660 PRO-B offered a balanced combination of engine performance, handling characteristics, and drivetrain design. These elements were carefully engineered to meet the demands of urban driving and commercial applications, making the van a reliable and efficient choice for businesses and individuals operating in bustling city environments.

Interior Features and Space

The 2001-2003 Honda Acty 660 PRO-B offered practical interior features and efficient use of space, catering to the needs of both commercial users and individuals.

Seating Capacity: The van's interior provided seating for two occupants. This setup allowed for a generous amount of cargo space behind the front seats, making it a versatile choice for businesses that required both transportation and cargo-carrying capabilities.

Interior Materials: The Acty 660 PRO-B typically featured straightforward and durable interior materials. These materials were chosen for their durability, ease of maintenance, and resistance to wear and tear, which was crucial for commercial use.

Dashboard and Controls: The dashboard layout was designed for practicality and ease of use. Essential controls and instrumentation were logically arranged, providing the driver with quick access to vital information and functions.

Storage Solutions: Despite its compact size, the Acty 660 PRO-B offered clever storage solutions. These included glove compartments, door pockets, and additional storage spaces within easy reach of the driver and passenger. These storage options helped keep the cabin organized and clutter-free.

Visibility: The van's design prioritized visibility, with large windows and a commanding driving position. This design element was especially important for city driving, allowing the driver to navigate through traffic and tight spaces with confidence.

Utility and Cargo Space: The Acty 660 PRO-B excelled in utilizing interior space efficiently. With two seats up front, the rear cargo area was roomy and versatile, accommodating a variety of cargo types and sizes. This flexibility made it a valuable asset for businesses engaged in delivery services or transporting goods within urban areas.

Comfort Features: While comfort features may have been more basic compared to passenger cars, the Acty 660 PRO-B likely included features to enhance the driving experience. These might have included adjustable seats and air conditioning, ensuring a comfortable ride even during long hours on the road.

Audio and Entertainment: Depending on the trim level and market, the van might have offered basic audio systems or the option to install aftermarket entertainment systems, allowing users to enjoy music or stay connected while on the go.

In summary, the 2001-2003 Honda Acty 660 PRO-B's interior was designed with a focus on functionality, durability, and efficient use of space. Whether used for commercial purposes or personal transportation, the interior features catered to the practical needs of users operating in urban environments.

Exterior Styling and Design

The 2001-2003 Honda Acty 660 PRO-B showcased a practical and purposeful exterior design tailored to meet the demands of urban driving and commercial applications.

Compact and Maneuverable: The Acty 660 PRO-B's exterior design prioritized compactness and maneuverability. With an overall length of 339.5 cm (133.66 inches) and a width of 147.5 cm (58.07 inches), the van had a small footprint that made it well-suited for navigating congested city streets and tight parking spaces.

Utilitarian Aesthetics: The exterior styling of the Acty 660 PRO-B was straightforward and utilitarian. The design focused on functionality and practicality, with clean lines and minimal ornamentation. This minimalistic approach emphasized the van's purpose as a reliable workhorse for businesses and individuals.

Visibility: Large windows and a well-placed driver's seat offered excellent visibility from the cabin. This design element was crucial for city driving, allowing the driver to have a clear view of the road and surroundings, enhancing safety and maneuverability.

Front-End Design: The front end of the van typically featured a simple yet functional design. It might have included a grille, headlights, and a bumper that were designed to withstand the rigors of daily use and minor impacts.

Rear Cargo Access: The Acty 660 PRO-B's rear design emphasized accessibility for cargo. Depending on the variant, it might have featured rear swing-out doors or a tailgate-style rear door, allowing for easy loading and unloading of cargo.

Exterior Colors: Depending on the market and trim level, the van might have been available in a range of exterior colors, providing users with some degree of personalization.

Wheel Options: While the standard wheel options were typically utilitarian and designed for durability, users might have had the option to select different wheel configurations based on their preferences.

In summary, the 2001-2003 Honda Acty 660 PRO-B's exterior styling and design prioritized functionality, compactness, and durability. Its unpretentious aesthetics and utilitarian features made it a reliable and practical choice for businesses and individuals seeking a dependable vehicle for urban driving and commercial use.

Safety Features

The 2001-2003 Honda Acty 660 PRO-B, despite its compact size and commercial focus, was equipped with safety features designed to enhance occupant protection and overall road safety.

Airbags: The Acty 660 PRO-B typically featured a driver's airbag as a standard safety feature. This airbag provided an additional level of protection for the driver in the event of a collision. Depending on the trim level and market, there might have been options for additional airbags, such as a passenger-side airbag.

Side Impact Bar: Many vehicles of this type were equipped with side impact bars, which were designed to absorb and distribute impact energy in the event of a side collision. These bars enhanced the vehicle's structural integrity and protected occupants.

Anti-Lock Braking System (ABS): ABS technology might have been available on certain trim levels or as an option. ABS helped prevent wheel lockup during hard braking, reducing the risk of skidding and improving steering control, especially on slippery or wet road surfaces.

Brake Assist: Brake assist technology might have been offered, enhancing braking performance in emergency situations. It detected rapid brake pedal application and provided maximum braking force, aiding in shorter stopping distances.

Central Power Window Control: Depending on the trim level, central power window control could have been included, allowing the driver to control all windows from a central console. This feature improved convenience and safety by allowing the driver to adjust windows without reaching across the cabin.

Additional Stop Light: An additional high-mounted stop light was typically a standard safety feature. This provided additional visibility to vehicles following the Acty 660 PRO-B, reducing the risk of rear-end collisions.

Optional Safety Features: Depending on the market and trim level, additional safety features such as traction control system (TCS), break assist, or parking radar might have been offered as options to enhance safety further.

It's important to note that while the Acty 660 PRO-B was primarily designed for commercial use, Honda still incorporated safety features to protect both the driver and passengers. These safety features aimed to improve overall road safety and mitigate the risks associated with city driving and commercial applications.

Maintenance and Reliability

The 2001-2003 Honda Acty 660 PRO-B was recognized for its reputation for reliability and ease of maintenance, making it a dependable choice for both commercial and personal use.

Regular Maintenance: Like all vehicles, the Acty 660 PRO-B benefited from regular maintenance routines. Routine tasks such as oil changes, air filter replacements, and brake inspections helped keep the vehicle in optimal working condition.

Durable Components: Honda engineered the Acty 660 PRO-B with durable and long-lasting components, contributing to its reputation for reliability. Quality materials and manufacturing processes were employed to ensure the vehicle could withstand the demands of daily use.

Access to Parts: Genuine Honda parts and replacement components were widely available, making it convenient for owners and maintenance professionals to source the necessary parts for repairs and maintenance. This accessibility reduced downtime and ensured timely servicing.

User-Friendly Design: The van's design was user-friendly, with components and systems that were relatively easy to access and service. This design approach simplified maintenance tasks, further contributing to the van's reputation for reliability.

Scheduled Servicing: Honda typically provided recommended maintenance schedules in the owner's manual, outlining when specific services should be performed. Following these schedules helped ensure the vehicle's longevity and reliability.

Dependable Engine: The Acty 660 PRO-B's engine, with its focus on fuel efficiency and durability, was a key contributor to the vehicle's reliability. Proper maintenance of the engine, including regular oil changes and spark plug replacements, played a vital role in its long-term performance.

Built for Durability: Honda designed the Acty 660 PRO-B with durability in mind. Its robust construction, including a sturdy frame and well-engineered suspension, contributed to its ability to withstand the rigors of daily use, especially for commercial applications.

Resale Value: Due to its reputation for reliability, well-maintained Acty 660 PRO-B vehicles often retained their resale value. This was appealing to both commercial operators looking to upgrade their fleets and individual owners seeking to sell their vehicles.

In summary, the 2001-2003 Honda Acty 660 PRO-B was recognized for its maintenance-friendly design, durable components, and reputation for reliability. These factors made it a dependable choice for businesses and individuals seeking a vehicle that could consistently perform in urban environments and commercial applications.

Fuel Average in Real-world Driving

The real-world fuel average of the 2001-2003 Honda Acty 660 PRO-B was a key factor contributing to its popularity, particularly among businesses and individuals seeking cost-effective transportation in urban environments.

Efficient Engine: The Acty 660 PRO-B was equipped with a compact yet efficient engine that prioritized fuel economy. This engine design, combined with Honda's engineering expertise, allowed the vehicle to achieve commendable fuel efficiency in real-world driving conditions.

City-Friendly Design: The van's compact size and lightweight construction were well-suited for city driving. It excelled in navigating congested streets and traffic, where fuel efficiency was paramount. Its modest engine size and power output were balanced to deliver both performance and economy in urban settings.

Stop-and-Go Efficiency: In stop-and-go city traffic, the Acty 660 PRO-B's engine operated efficiently, consuming minimal fuel during idling and low-speed driving. This made it an economical choice for businesses engaged in delivery services, where frequent stops and starts were common.

Practical Fuel Tank Capacity: The van's fuel tank capacity of approximately 9.7 US gallons (8.1 UK gallons or 37 liters) was well-matched to its fuel-efficient engine. This allowed for longer trips between refueling stops, increasing productivity for commercial users.

Real-World Results: In real-world driving conditions, the Acty 660 PRO-B often exceeded its official fuel economy ratings. Drivers reported achieving impressive miles per gallon (MPG) figures, especially during city driving, where the van's efficiency shone.

Cost Savings: The vehicle's excellent fuel average in real-world driving translated into significant cost savings for businesses and individual owners. Lower fuel expenses were especially valuable for commercial operators who needed to keep operational costs in check.

Environmentally Friendly: The Acty 660 PRO-B's fuel efficiency not only benefited owners' wallets but also contributed to reducing carbon emissions, making it an environmentally responsible choice for urban transportation.

In summary, the 2001-2003 Honda Acty 660 PRO-B's real-world fuel average was a testament to its efficient engine design, city-friendly characteristics, and practical fuel tank capacity. These factors combined to make it a cost-effective and environmentally conscious choice for those navigating the demands of urban driving.

Conclusion: The Honda Acty 660 PRO-B in Review

The 2001-2003 Honda Acty 660 PRO-B emerged as a versatile and dependable vehicle, primarily designed for urban environments and commercial applications. Throughout its production years, this compact van earned a reputation for several key attributes:

Reliability: The Acty 660 PRO-B was built to last, with durable components and a focus on dependability. It was a trusted choice for businesses requiring a reliable workhorse for daily operations.

Efficiency: Its fuel-efficient engine, efficient transmission, and city-friendly design made it an economical choice for both businesses and individual users. The real-world fuel average often exceeded expectations, resulting in cost savings.

Compact Design: With its compact dimensions, the Acty 660 PRO-B excelled in urban settings. Its small footprint allowed for easy maneuverability in crowded streets, and it could navigate tight spaces with ease.

Cargo Versatility: The van's cargo area, accessible through rear doors, offered ample space for transporting goods, making it a practical choice for businesses engaged in deliveries and logistics.

Safety: Despite its commercial focus, the Acty 660 PRO-B featured safety elements like airbags, side impact bars, and other safety technologies, enhancing occupant protection.

Low Maintenance: Its user-friendly design and access to genuine Honda parts simplified maintenance tasks, ensuring minimal downtime for owners.

Resale Value: Well-maintained Acty 660 PRO-B vehicles often retained their resale value, attracting buyers looking for reliable and cost-effective transportation solutions.

In review, the 2001-2003 Honda Acty 660 PRO-B was a vehicle that combined efficiency, reliability, and practicality. Whether used for commercial purposes or personal transportation in bustling urban environments, it met the demands of users seeking a dependable and cost-effective solution. Its reputation for real-world fuel efficiency, in particular, made it a standout choice in its class.

FAQ: 2001-2003 Honda Acty 660 PRO-B