1990 Honda Acty 660 PRO-T Specs

OVERVIEW

With a fuel consumption of 45.2 mpg US - 54.3 mpg UK - 5.2 L/100km, a weight of 1697 lbs (770 kg), the Honda Acty 660 PRO-T has a water cooling 3 cylinder horizontal range engine, a Regular gasoline engine E07A. This engine E07A produces a maximum power of 38.5 PS (38 bhp - 28.3 kW) at 5300 rpm and a maximum torque of 53.9 Nm (39.7 lb.ft - 5.5 kg.m) at 4500 rpm. The engine power is transmitted to the road by the rear wheel drive (MID) with a 4MT gearbox. For stopping power, the Honda Acty 660 PRO-T braking system includes Leading trailing drum brake at the rear and Disk at the front. Chassis details - Honda Acty 660 PRO-T has De-Dion type rear suspension and McPherson independent front suspension for road holding and ride confort.

Add to compare list

- Present
- Option
- Not Present (or Dealer Option)

• Search Car Specs
• Other Acty Specs Database

By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on April 24, 2024

Introduction to the 1990-1991 Honda Acty 660 PRO-T

The 1990-1991 Honda Acty 660 PRO-T: A Compact Commercial Van with Utility

During the production period spanning from February 1990 to July 1991, Honda introduced the Acty 660 PRO-T—a compact commercial van designed to offer efficient transportation solutions. With a focus on utility and compactness, this model catered to those seeking a reliable workhorse for urban and short-distance driving.

The Acty 660 PRO-T featured a mid-engine layout and a 4-speed manual transmission, providing drivers with precise control over the vehicle's performance. Its compact size made it well-suited for navigating tight urban spaces and crowded streets, while the 2-seater configuration offered ample cargo space for various hauling needs.

Under the hood, the Acty 660 PRO-T housed a 656 cm3 engine (engine code: E07A) with a water-cooled 3-cylinder horizontal range setup. While power figures were modest, with a maximum output of 38.5 PS (38 bhp), the focus here was on fuel efficiency and practicality rather than raw power.

The exterior dimensions of the Acty 660 PRO-T emphasized its compact nature. With an exterior length of 329.5 cm, width of 139.5 cm, and height of 187 cm, the vehicle's compact footprint allowed it to easily maneuver through urban environments. The wheelbase of 190 cm contributed to stability and ease of handling, while the ground clearance of 19.5 cm ensured it could handle varying road conditions.

The Acty 660 PRO-T's engine was designed to run on regular gasoline, aligning with its economical and practical ethos. Fuel consumption was a key consideration, and the vehicle boasted a fuel consumption rate of 45.2 mpg (US) in the 60 km/h mode, making it an efficient option for daily commuting and local transportation.

Inside, the Acty 660 PRO-T offered basic interior features. While power windows and power steering were absent, the vehicle maintained functionality with amenities like a radio. The absence of advanced safety features such as airbags and side impact bars reflected the vehicle's focus on utility rather than luxury.

The Acty 660 PRO-T showcased Honda's dedication to providing compact, efficient, and practical vehicles for specific needs. Whether used for small-scale commercial purposes or as a city-bound workhorse, this model demonstrated that utility and efficiency can be prioritized without sacrificing reliability.

As a testament to Honda's engineering prowess, the 1990-1991 Acty 660 PRO-T remains a piece of automotive history that encapsulates an era of compact commercial vehicles designed to meet the demands of urban landscapes.

Engine Variants and Types

Engine Variants and Types of the 1990-1991 Honda Acty 660 PRO-T

The heart of the 1990-1991 Honda Acty 660 PRO-T lies in its compact yet efficient engine variants. Designed to balance power and economy, these engines played a crucial role in defining the vehicle's performance characteristics.

At the core of the Acty 660 PRO-T was the E07A engine. This water-cooled 3-cylinder engine featured a horizontal arrangement, contributing to the vehicle's compact design. The engine's displacement of 656 cm3 was optimized for kei car regulations, ensuring compliance with size and power limitations.

While power output might not have been the highest, with a maximum output of 38.5 PS (38 bhp), the Acty 660 PRO-T prioritized fuel efficiency and practicality. This engine variant was tailored to meet the demands of urban driving and short-distance travel, where the emphasis was on maneuverability and economy.

The E07A engine's torque delivery was equally noteworthy, with a maximum torque of 53.9 Nm (39.7 lb.ft). This torque figure, reached at 4500 rpm, complemented the vehicle's mid-engine setup and contributed to responsive acceleration within its intended operating range.

Regular gasoline powered the Acty 660 PRO-T, aligning with its utilitarian nature and focus on efficient operation. With a fuel consumption rate of 45.2 mpg (US) in the 60 km/h mode, this engine variant showcased its economical prowess, catering to drivers seeking cost-effective transportation solutions.

In summary, the engine variants and types of the 1990-1991 Honda Acty 660 PRO-T were tailored to suit the specific needs of compact commercial vehicles. While power figures were moderate, the focus on practicality, maneuverability, and fuel efficiency made these engines well-suited for urban environments and short-distance travel.

Dimensions and Sizes

Dimensions and Sizes of the 1990-1991 Honda Acty 660 PRO-T

The compact stature of the 1990-1991 Honda Acty 660 PRO-T played a pivotal role in its functionality, especially in urban and tight spaces. The vehicle's dimensions were finely tuned to ensure maneuverability and efficiency without compromising on its utility.

With an exterior length of 329.5 cm, the Acty 660 PRO-T occupied a minimal footprint on the road, allowing it to slip through congested streets and narrow lanes with ease. This compact length made parking and navigating urban environments hassle-free, making it an ideal choice for urban commuting and commercial usage.

Its width, measuring 139.5 cm, further enhanced its agility by allowing it to slip through tight spaces and traffic congestion effortlessly. The compact width also contributed to the vehicle's stability, making it less susceptible to lateral movement while navigating corners.

The Acty 660 PRO-T's height, standing at 187 cm, ensured that it could comfortably fit into low-ceilinged areas, such as underground parking lots and garage spaces. This aspect of the vehicle's design was particularly practical for urban dwellers and commercial users with space constraints.

The wheelbase of 190 cm contributed to the vehicle's stability and ride comfort. The extended wheelbase helped distribute weight evenly and reduced the chances of tipping during turns, making the Acty 660 PRO-T a reliable and predictable performer on the road.

Ground clearance, a crucial factor for vehicles traversing varying road conditions, was set at 19.5 cm. This provided a sufficient buffer against road irregularities while maintaining the low-slung profile that enhanced the vehicle's aerodynamics and fuel efficiency.

Weighing in at 770 kg, the Acty 660 PRO-T maintained a lightweight construction, which not only contributed to its efficiency but also influenced its maneuverability and overall handling characteristics.

In conclusion, the dimensions and sizes of the 1990-1991 Honda Acty 660 PRO-T were meticulously designed to strike a balance between compactness, utility, and stability. This design philosophy allowed the vehicle to excel in urban environments and fulfill its role as a reliable and practical commercial van.

Fuel Tank Capacity Specifications

Fuel Tank Capacity Specifications of the 1990-1991 Honda Acty 660 PRO-T

The fuel tank capacity of the 1990-1991 Honda Acty 660 PRO-T was a carefully considered aspect of its design, aligning with its practicality and intended usage. With its focus on efficiency and utility, the fuel tank capacity was designed to strike a balance between range and usability.

The Acty 660 PRO-T featured a fuel tank with a capacity of 9.7 US gallons (37 liters). This fuel tank capacity was optimized to accommodate the vehicle's compact design while still providing a reasonable driving range.

This capacity was particularly well-suited for urban and short-distance driving, where frequent refueling might not be necessary. The Acty 660 PRO-T's economical engine and efficient fuel consumption further extended the vehicle's range, making it an ideal choice for local commuting and commercial applications.

The fuel tank capacity specification highlighted the Acty 660 PRO-T's role as a practical and economical transportation solution. While not designed for long-haul journeys, this capacity catered to its intended usage scenario, allowing drivers to navigate through city traffic and complete short trips without the need for constant refueling.

Fuel Consumption and Average MPG

Fuel Consumption and Average MPG of the 1990-1991 Honda Acty 660 PRO-T

Efficiency was a central focus in the design of the 1990-1991 Honda Acty 660 PRO-T, reflected in its fuel consumption and average miles per gallon (MPG) figures. These specifications showcased the vehicle's practicality and suitability for urban and short-distance driving scenarios.

The Acty 660 PRO-T's engine, coupled with its compact dimensions and lightweight construction, contributed to an impressive fuel consumption rate. The vehicle achieved approximately 45.2 mpg (US) in the 60 km/h mode, translating to approximately 54.3 mpg (UK) or 5.2 L/100km.

These figures demonstrated the Acty 660 PRO-T's ability to cover significant distances on a minimal amount of fuel, making it a cost-effective choice for daily commuting and local transportation needs. The vehicle's compact size and efficient engine played a synergistic role in achieving these fuel efficiency figures.

The average MPG figures were consistent with the vehicle's role as a city-bound workhorse. With its intended usage scenario in mind, the Acty 660 PRO-T showcased its ability to navigate urban environments with minimal environmental impact and reduced fuel expenditures.

In summary, the fuel consumption and average MPG figures of the 1990-1991 Honda Acty 660 PRO-T highlighted its economical and eco-friendly characteristics. These specifications, aligned with the vehicle's compactness and efficient engine, made it a practical choice for those seeking a reliable and efficient mode of transportation for urban and short-distance driving.

Trim Levels and Models

Trim Levels and Models of the 1990-1991 Honda Acty 660 PRO-T

The 1990-1991 Honda Acty 660 PRO-T was available in various trim levels and models, each catering to specific needs and preferences of drivers and businesses. These trim levels encompassed features and options that contributed to the vehicle's versatility and usability.

While exact details about individual trim levels might vary, the Acty 660 PRO-T primarily focused on providing a utilitarian approach. Its design emphasized practicality and efficiency, with features tailored to suit its role as a compact commercial van.

Given its intended usage as a workhorse for urban transportation and short-distance hauling, the Acty 660 PRO-T's trim levels were designed to meet the essential requirements of commercial users. It offered the essential features needed for comfortable driving and effective cargo transportation, but it wasn't equipped with luxurious amenities commonly found in passenger vehicles.

The available models might have differed in terms of specific configurations, such as cargo space arrangements and optional accessories, but the emphasis on functionality and economy remained consistent across the lineup.

Overall, the 1990-1991 Honda Acty 660 PRO-T's trim levels and models were designed to align with its utilitarian character. By offering different configurations and features tailored for commercial and urban use, the vehicle catered to drivers seeking an efficient and practical solution for their transportation and cargo needs.

Generational Overview

Generational Overview of the 1990-1991 Honda Acty 660 PRO-T

The 1990-1991 Honda Acty 660 PRO-T marked a specific period within the Acty's generational timeline. As part of Honda's commitment to providing efficient and practical commercial vehicles, the Acty 660 PRO-T emerged as a distinctive iteration with its own set of characteristics.

The Acty series itself had been evolving since its inception, and the 1990-1991 model continued to build upon the legacy of its predecessors. While the specific generational distinctions might not be as pronounced in the Acty's case compared to larger vehicle lines, Honda's dedication to refining its commercial offerings was evident in this period.

During the Acty 660 PRO-T's production years, Honda continued to emphasize the model's compactness, efficiency, and utility. The design philosophy remained consistent with previous generations, catering to businesses and individuals seeking a versatile and cost-effective solution for urban transportation and cargo hauling.

It's important to note that while the Acty 660 PRO-T might have shared certain design elements and characteristics with earlier Acty models, its unique attributes, including engine specifications, dimensions, and available features, set it apart as a specific generation within the Acty lineup.

In summary, the 1990-1991 Honda Acty 660 PRO-T represented a distinct generational point within the Acty series. While maintaining the core principles of practicality and efficiency, this particular iteration introduced its own set of specifications and features, contributing to Honda's ongoing commitment to providing compact and reliable commercial vehicles.

Wheel Options and Configurations

Wheel Options and Configurations of the 1990-1991 Honda Acty 660 PRO-T

The wheel options and configurations of the 1990-1991 Honda Acty 660 PRO-T contributed to its overall performance, stability, and functionality. While the vehicle's compact design defined its footprint, the wheel choices played a role in its maneuverability and handling characteristics.

The Acty 660 PRO-T was equipped with wheels that were specifically chosen to complement its compact dimensions and intended usage. The tire size of 145 R12-6PR LT ensured sufficient grip while providing a balance between comfort and load-bearing capacity.

The wheel options remained aligned with the vehicle's utilitarian nature, catering to the demands of commercial users and urban drivers. The compact size of the wheels allowed the Acty 660 PRO-T to navigate through tight spaces and congested roads with ease.

The choice of wheels and their configuration, combined with the vehicle's suspension setup, contributed to the Acty 660 PRO-T's stability and handling. These factors were essential for ensuring a safe and predictable driving experience, especially in urban environments where agility and maneuverability were crucial.

In essence, the wheel options and configurations of the 1990-1991 Honda Acty 660 PRO-T were carefully selected to enhance its overall performance and utility. By providing the right balance between grip, comfort, and maneuverability, these elements played a vital role in defining the vehicle's character as a compact and practical commercial van.

Notable Features and Innovations

Notable Features and Innovations of the 1990-1991 Honda Acty 660 PRO-T

The 1990-1991 Honda Acty 660 PRO-T introduced several notable features and innovations that enhanced its practicality and utility within the commercial vehicle segment. While its primary focus was on delivering a reliable and efficient mode of transportation, these features added value to the overall driving experience.

One of the key features of the Acty 660 PRO-T was its mid-engine layout. Placing the engine in the middle of the vehicle allowed for a more balanced weight distribution, contributing to improved stability and handling. This layout also created more space for cargo within the vehicle's compact dimensions.

The 4-speed manual transmission was another innovation that catered to drivers seeking greater control over the vehicle's performance. This transmission configuration provided the Acty 660 PRO-T with responsive gear changes and allowed drivers to tailor their driving experience according to their preferences and the road conditions.

The Acty 660 PRO-T's interior layout, although utilitarian, offered functional elements that contributed to comfort and convenience. While lacking power windows and power steering, the vehicle maintained essential features such as a radio, ensuring drivers had access to entertainment during their journeys.

Furthermore, the Acty 660 PRO-T's design and engineering aimed at maximizing cargo space. Its 2-seater configuration, combined with a spacious cargo area, allowed the vehicle to efficiently transport goods, making it a suitable choice for small-scale commercial operations and local deliveries.

In summary, the 1990-1991 Honda Acty 660 PRO-T showcased notable features and innovations that aligned with its role as a compact commercial van. From its mid-engine layout and manual transmission to its functional interior and cargo-friendly design, these elements collectively enhanced the vehicle's value proposition for those seeking an efficient and reliable solution for urban transportation and cargo hauling.

Conclusion and Summary

The 1990-1991 Honda Acty 660 PRO-T encapsulated Honda's commitment to providing practical and efficient commercial transportation solutions. With its compact dimensions, innovative features, and focus on economy, it served as a reliable workhorse for urban and short-distance driving needs.

The Acty 660 PRO-T's mid-engine layout and 4-speed manual transmission contributed to its stability and driver control, making it a nimble and responsive vehicle. Its utilitarian interior, though basic, provided essential amenities for drivers and passengers.

The vehicle's economical 656 cm3 engine, coupled with its impressive fuel consumption figures, underscored its efficiency and low operational costs. The Acty 660 PRO-T's compact exterior dimensions allowed it to navigate through congested streets and tight spaces effortlessly.

In the realm of commercial vehicles, the Acty 660 PRO-T carved a niche for itself by offering a balance of practicality, efficiency, and functionality. It stood as a testament to Honda's ability to provide tailored solutions that met the demands of businesses and individuals seeking cost-effective and reliable transportation for their urban and short-haul needs.

Frequently Asked Questions (FAQ) About the 1990-1991 Honda Acty 660 PRO-T