1995 Honda Acty 660 STD Specs

OVERVIEW

With a fuel consumption of 44.3 mpg US - 53.2 mpg UK - 5.3 L/100km, a weight of 1477 lbs (670 kg), the Honda Acty 660 STD has a water cooling 3 cylinder horizontal range engine, a Regular gasoline engine E07A. This engine E07A produces a maximum power of 38.5 PS (38 bhp - 28.3 kW) at 5300 rpm and a maximum torque of 53.9 Nm (39.7 lb.ft - 5.5 kg.m) at 4500 rpm. The engine power is transmitted to the road by the rear wheel drive (MID) with a 4MT gearbox. For stopping power, the Honda Acty 660 STD braking system includes Leading trailing drum brake at the rear and Disk at the front. Chassis details - Honda Acty 660 STD has De-Dion type rear suspension and McPherson independent front suspension for road holding and ride confort.

Add to compare list

- Present
- Option
- Not Present (or Dealer Option)

• Search Car Specs
• Other Acty Specs Database

By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on April 25, 2024

Introduction to the 1995-1999 Honda Acty 660 STD

The 1995-1999 Honda Acty 660 STD, a compact and efficient commercial van, left an indelible mark on the automotive landscape during its production years. This dependable workhorse was designed to cater to the diverse needs of businesses, offering a versatile and economical solution for transportation and cargo-hauling tasks.

Within the heart of the Acty 660 STD resides a compact yet robust engine, the E07A. Power output, a modest 38.5 PS, might not impress in terms of raw horsepower, but this engine's efficiency and reliability were its standout features. With a fuel consumption rate that soared to an impressive 44.3 miles per gallon (US) in the 60 km/h mode, it proved to be an economic choice for those with an eye on the bottom line.

In terms of dimensions, the Acty 660 STD struck a balance between utility and maneuverability. With an exterior length of 325.5 cm and a wheelbase of 190 cm, it provided ample cargo space while maintaining a compact footprint. The low ride height of 20 cm ensured ease of loading and unloading, while its lightweight construction, at 670 kg, further contributed to its nimbleness.

This commercial van's suspension setup featured a McPherson independent front suspension and a De-Dion rear suspension, enhancing stability and comfort during the ride. The Acty 660 STD's braking system included front disc brakes and leading trailing drum brakes at the rear, ensuring reliable stopping power.

While the Acty 660 STD prioritized practicality, its interior and amenity offerings were relatively basic. It featured manual windows and steering, catering to its core purpose as a functional work vehicle. Safety features like airbags and traction control were notably absent, which was typical for vehicles in its class during that era.

In summary, the 1995-1999 Honda Acty 660 STD was a utilitarian marvel, designed to excel in the realm of commercial transport. Its efficient engine, compact dimensions, and dependable suspension made it a reliable partner for businesses, while its straightforward interior and lack of advanced amenities reflected its practical focus.

Engine Specifications of the Acty 660 STD

The engine specifications of the 1995-1999 Honda Acty 660 STD reveal the mechanical heart that powered this compact commercial van. Under its unassuming exterior lay a reliable and efficient powerplant that catered to the demands of various businesses.

The Acty 660 STD was equipped with the E07A engine, a compact yet robust power source. This 3-cylinder engine featured water cooling and a horizontal layout, emphasizing simplicity and durability. While its power output was a modest 38.5 PS, it delivered dependable performance tailored to the Acty's intended utility.

With a displacement of 656 cm³, this engine struck a balance between adequate power and fuel efficiency, making it an economical choice for businesses focused on minimizing operating costs. The E07A's maximum torque of 53.9 Nm provided sufficient low-end grunt for carrying cargo loads, contributing to the Acty's versatility.

Operated within the range of 4500 to 5300 rpm, the E07A engine delivered its power efficiently, ensuring smooth and reliable operation during everyday use. Its reliance on regular gasoline simplified refueling, aligning with the practical and cost-effective nature of the Acty 660 STD.

In conclusion, the engine specifications of the 1995-1999 Honda Acty 660 STD underscored the vehicle's utilitarian focus. The E07A engine, with its compact design, balanced power output, and efficient operation, was well-suited to the demands of commercial transportation, delivering reliability and cost-effectiveness for businesses on the move.

Dimensions and Sizes

The dimensions and sizes of the 1995-1999 Honda Acty 660 STD were carefully designed to strike a balance between practicality and maneuverability. This compact commercial van was tailored to meet the needs of businesses, offering versatile cargo space while remaining nimble in urban and confined spaces.

With an exterior length of 325.5 cm, the Acty 660 STD maintained a compact footprint. This dimension was well-suited for navigating crowded city streets and fitting into tight parking spaces, making it a reliable choice for urban deliveries and services.

The Acty's exterior width measured at 139.5 cm, a dimension that allowed it to easily traverse narrow lanes and alleys, essential for tasks that demanded precision and accessibility.

Its exterior height reached 171 cm, providing ample clearance for loading and unloading cargo, even in areas with restricted overhead space.

The van's wheelbase, measuring 190 cm, contributed to its stability on the road. This dimension helped distribute weight evenly and contributed to the Acty's ability to handle various cargo loads with ease.

The ride height or ground clearance of 20 cm ensured that the Acty could navigate uneven terrain or speed bumps without excessive risk of bottoming out.

Despite its compact size, the Acty 660 STD offered a spacious and practical cargo area. This blend of maneuverability and cargo capacity made it an ideal choice for businesses in need of a versatile commercial vehicle.

In summary, the dimensions and sizes of the 1995-1999 Honda Acty 660 STD underscored its practicality and adaptability. Its compact exterior dimensions facilitated urban navigation, while the well-designed cargo area ensured it could handle a variety of tasks, making it a dependable partner for businesses during its production years.

Fuel Tank Capacity

The fuel tank capacity of the 1995-1999 Honda Acty 660 STD played a pivotal role in determining its range and practicality as a commercial van. In the world of business, where time and efficiency are of the essence, having an appropriate fuel tank capacity is essential.

The Acty 660 STD came equipped with a fuel tank capable of holding up to 9.7 US gallons, which is approximately 8.1 UK gallons or 37 liters. This fuel capacity was well-suited to the Acty's modest engine and its intended role as a compact workhorse for businesses.

With its fuel-efficient engine and this tank size, the Acty was capable of covering considerable distances on a single tank of fuel. This translated into fewer refueling stops, greater operational efficiency, and reduced downtime for businesses reliant on the Acty for transportation and deliveries.

The combination of a relatively large fuel tank within the context of its compact size allowed the Acty 660 STD to offer a balance between cargo capacity, range, and operational economy, making it a practical choice for various commercial applications.

In conclusion, the fuel tank capacity of the 1995-1999 Honda Acty 660 STD, at 9.7 US gallons (8.1 UK gallons or 37 liters), provided a crucial element of practicality for businesses. It offered a favorable balance between fuel efficiency and range, reducing the need for frequent refueling and contributing to its efficiency as a commercial van.

Fuel Consumption and MPG

Fuel consumption and miles per gallon (MPG) are crucial considerations for any commercial vehicle, and the 1995-1999 Honda Acty 660 STD didn't disappoint in this regard. This compact commercial van was designed with an emphasis on efficiency, making it an economical choice for businesses.

When operating at a steady speed of 60 km/h, the Acty 660 STD achieved a remarkable fuel consumption rate of 44.3 miles per gallon (US) or 53.2 miles per gallon (UK), which translates to approximately 5.3 liters per 100 kilometers. This impressive fuel efficiency was a key selling point for the Acty, as it allowed businesses to minimize their operating costs, particularly in terms of fuel expenses.

The Acty's efficient use of fuel was not only beneficial for cost savings but also for reducing its environmental footprint. With its ability to cover significant distances on a relatively small amount of fuel, the Acty contributed to lower emissions and a smaller carbon footprint compared to less fuel-efficient vehicles.

This fuel efficiency, combined with its compact dimensions, made the Acty 660 STD an ideal choice for urban deliveries, services, and other commercial applications where frequent stops and starts were common. It enabled businesses to complete their tasks with fewer interruptions for refueling.

In summary, the 1995-1999 Honda Acty 660 STD demonstrated exceptional fuel efficiency, achieving an impressive 44.3 miles per gallon (US) at a steady speed of 60 km/h. This efficiency was a key factor in its appeal to businesses, offering a cost-effective and environmentally conscious solution for their transportation needs.

Fuel Capacity

Fuel capacity is a critical aspect of any vehicle, and the 1995-1999 Honda Acty 660 STD was designed with practicality in mind, including an appropriately sized fuel tank to cater to the needs of businesses and commercial users.

The Acty 660 STD came equipped with a fuel tank that could hold up to 9.7 US gallons or approximately 8.1 UK gallons, which is equivalent to about 37 liters. This fuel capacity was well-suited to the Acty's efficient engine and intended role as a compact commercial van.

The choice of a fuel tank of this size offered a favorable balance between fuel capacity and vehicle weight. It ensured that the Acty could carry a sufficient amount of fuel for its intended tasks without compromising its payload capacity or overall efficiency.

The Acty's fuel capacity allowed it to cover substantial distances on a single tank of fuel, reducing the need for frequent refueling stops and contributing to its efficiency in a variety of commercial applications.

In conclusion, the 1995-1999 Honda Acty 660 STD featured a practical and well-balanced fuel capacity of 9.7 US gallons (8.1 UK gallons or 37 liters). This fuel tank size met the needs of businesses, offering an optimal balance between fuel efficiency and range, ultimately enhancing the vehicle's functionality and cost-effectiveness.

Average Fuel Efficiency

The average fuel efficiency of the 1995-1999 Honda Acty 660 STD was a standout feature, making it a practical and economical choice for businesses and commercial users. This compact commercial van was designed to excel in fuel efficiency, aligning with the cost-conscious needs of its target audience.

When operating in the 60 km/h mode, the Acty 660 STD delivered an impressive average fuel consumption rate of 44.3 miles per gallon (US) or 53.2 miles per gallon (UK), which is approximately 5.3 liters per 100 kilometers. This level of fuel efficiency was a testament to the Acty's economical design and the efficiency of its E07A engine.

The Acty's average fuel efficiency was particularly advantageous for businesses that required frequent stop-and-start operations, such as urban deliveries or service tasks. With fewer refueling stops, it maximized productivity and reduced operating costs.

Moreover, the Acty's environmental impact was minimized by its fuel-efficient performance. Lower fuel consumption translated to reduced emissions, contributing to a smaller carbon footprint and aligning with environmental consciousness.

In summary, the 1995-1999 Honda Acty 660 STD showcased exceptional average fuel efficiency, achieving a remarkable 44.3 miles per gallon (US) in the 60 km/h mode. This fuel efficiency made it an attractive choice for businesses, offering a cost-effective and environmentally responsible solution for their transportation needs.

Wheel Specifications

The wheel specifications of the 1995-1999 Honda Acty 660 STD were designed to complement its compact and utilitarian nature, contributing to its stability and maneuverability, especially in urban and commercial settings.

The Acty 660 STD came equipped with wheels featuring dimensions of 5.00-12-4PR. These wheels struck a balance between load-bearing capacity and traction, ensuring the Acty could handle the demands of various cargo loads while maintaining stability on the road.

The use of 4PR (4 Ply Rating) tires indicated that they were designed to provide durability and resistance to punctures, which was particularly important for a commercial vehicle frequently exposed to different road conditions.

The choice of wheel dimensions and tire specifications was well-aligned with the Acty's intended purpose. Its compact size, coupled with these wheels, allowed for nimble handling and precise navigation in confined spaces, such as city streets and parking lots.

The Acty's wheels and tires were an integral part of its overall design, contributing to its reliability and performance as a commercial van.

In summary, the 1995-1999 Honda Acty 660 STD featured wheel specifications that were tailored to its practical and utilitarian character. The 5.00-12-4PR wheels provided a sturdy foundation for the vehicle, enhancing its stability and maneuverability, making it well-suited for the challenges of urban and commercial environments.

Trim Levels and Generations

The 1995-1999 Honda Acty 660 STD was a versatile and dependable commercial van, and it offered a range of trim levels and generations during its production years to cater to the diverse needs of businesses and users.

Trim Levels:
The Acty 660 STD was available in different trim levels, allowing buyers to choose the configuration that best suited their requirements. These trim levels often varied in terms of features and amenities. While the Acty 660 STD was known for its practicality, some higher trim levels may have included additional comfort or convenience features, although specific details about these trim levels are not available.

Generations:
During its production run from December 1995 to April 1999, the Acty 660 STD may have undergone updates and improvements, resulting in different generations or versions of the vehicle. These generational changes could encompass various aspects of the van, including engine updates, exterior design tweaks, and interior enhancements. However, specific details about the generational changes are not provided in the available information.

The Acty 660 STD's trim levels and generations allowed customers to select a model that best aligned with their specific needs, whether it be for cargo-hauling, urban deliveries, or other commercial applications. These variations ensured that the Acty could continue to meet the evolving demands of its target market over its production years.

Conclusion and Overall Summary

The 1995-1999 Honda Acty 660 STD, a compact and dependable commercial van, left a lasting impression during its production years. This unassuming workhorse was designed to meet the diverse needs of businesses and commercial users, and it did so with efficiency and practicality in mind.

Under the hood, the Acty 660 STD featured the E07A engine, a compact and efficient powerplant that provided reliable performance for various tasks. With a fuel consumption rate of 44.3 miles per gallon (US) in the 60 km/h mode, it demonstrated exceptional fuel efficiency, reducing operational costs for businesses.

In terms of dimensions, the Acty's compact exterior made it adept at navigating urban environments, while its generous cargo space allowed it to handle various loads. Its 2-door, 2-seat configuration emphasized its utilitarian nature, making it a dedicated work vehicle.

The Acty's wheel specifications and suspension design contributed to its stability and maneuverability, crucial attributes for a commercial van that often had to negotiate tight spaces and urban traffic.

While its interior amenities were relatively basic, the Acty 660 STD was purpose-built for commercial applications, where practicality and reliability took precedence over luxury features.

Throughout its production years, the Acty 660 STD may have seen variations in trim levels and generations to cater to evolving user needs. These variations ensured that the Acty remained a versatile and dependable choice for businesses.

In conclusion, the 1995-1999 Honda Acty 660 STD was a practical and efficient commercial van that served as a reliable partner for businesses and commercial users. Its fuel efficiency, compact dimensions, and cargo capacity made it well-suited for urban deliveries and services, while its variations in trim levels and generations allowed it to adapt to changing demands over its production years.

FAQ: Common Queries About the 1995-1999 Honda Acty 660 STD