2000 Honda Acty 660 Town Specs


OVERVIEW

With a fuel consumption of 37.9 mpg US - 45.5 mpg UK - 6.2 L/100km, a weight of 1829 lbs (830 kg), the Honda Acty 660 Town has a water cooling 3 cylinder horizontal range SOHC engine, a Regular gasoline engine E07Z. This engine E07Z produces a maximum power of 46.6 PS (46 bhp - 34.3 kW) at 5500 rpm and a maximum torque of 58.8 Nm (43.3 lb.ft - 6 kg.m) at 5000 rpm. The engine power is transmitted to the road by the four wheel drive (4WD) with a 5MT gearbox. For stopping power, the Honda Acty 660 Town braking system includes fluid drum brake at the rear and hydraulic disk at the front. Chassis details - Honda Acty 660 Town has De-Dion type rear suspension and McPherson front suspension for road holding and ride confort.

Add to compare list

GENERAL INFORMATION
Complectation Name660 Town
Period of ProductionFeb 2000 - Nov 2000
Drive Wheels - Traction - Drivetrain4WD
Body TypeCommercial Van
Transmission Gearbox - Number of Speeds5MT
Engine Size - Displacement - Engine Capacity656 cm3 or 40 cu-in
Frame NameGD-HA7

HONDA ACTY 660 TOWN SIZE, DIMENSIONS AND WEIGHT
Exterior Length339.5 cm or 133.66 inches
Exterior Width147.5 cm or 58.07 inches
Exterior Height174.5 cm or 68.7 inches
Wheelbase242 cm or 95.27 inches
Ride Height - Ground Clearance19 cm or 7.48 inches
Weight830 kg or 1829 lbs
Num. of Seats2
Num. of Doors2
Minimum Turning Circle - Turning Diameter, m4.6
Fuel Tank Capacity9.7 US gallons
8.1 UK gallons
37 L

HONDA ACTY 660 TOWN ENGINE TECHNICAL DATA
Engine CodeE07Z
Maximum Power - Output - Horsepower46.6 PS or 46 bhp or 34.3 kW
Maximum Power RPM5500 rpm
Maximum Torque58.8 Nm or 43.3 lb.ft or 6 kg.m
Maximum Torque RPM5000 rpm
Engine Type - Number of Cylinderswater cooling 3 cylinder horizontal range SOHC
Fuel TypeRegular gasoline
LEVHonda LEV
Fuel Consumption (10/15 mode)37.9 mpg US
45.5 mpg UK
6.2 L/100km
Fuel Consumption (60 km/h mode)47 mpg US
56.4 mpg UK
5.0 L/100km

HONDA ACTY 660 TOWN SUSPENSION
Front Brakes - Disc Dimensionshydraulic disk
Rear Brakes - Disс Dimensionsfluid drum brake
Front SuspensionMcPherson
Rear SuspensionDe-Dion type
Tyres - Rims Dimensions145 R12-8PR LT
Aluminium DiskStandart

HONDA ACTY 660 TOWN EXTERIOR
SunroofNo
Tilt SunroofNo
Twin SunroofNo
Front SpoilerNo
Rear SpoilerNo
Power Adjustable Door MirrorsNo
Xenon LampsNo
Front Fog LampsNo
Rear Fog LampsNo
Cornering LampsNo
Ultraviolet Glass ProtectionNo
Roof RailNo

HONDA ACTY 660 TOWN INTERIOR
Power WindowNo
Power SteeringStandart
TachometerNo
Centralized Door LockNo
Keyless EnterNo
Right Hand DriveStandart
Left Hand DriveNo
Leather WindingNo
Adjustable SteeringNo
Wood PanelNo
Cruise ControlNo
Leather SeatNo
Power Adjustable SeatsNo
Reclining SeatsNo
Removable SeatsNo
Turning SeatsNo

HONDA ACTY 660 TOWN SAFETY
Drivers AirbagStandart
Passengers AirbagOption
Side AirbagNo
Side Impact BarStandart
TCSNo
Break AssistOption
Parking RadarNo
Central Power Window ControlNo
Additional Stop LightNo

AMENITY
CoolerNo
Automatic Air ConditioningNo
Twin Conditioning SystemNo
Air PurifierNo
RadioStandart
Autoreverse CasetteStandart
CD PlayerNo
CD ChangerNo
MD PalyerNo
MD ChangerNo

OTHER
LSDNo
Front StabilizerNo
Rear StablilizerNo
Special Equipment metallic guard and trucklamp (standard equipment)


- Present
- Option
- Not Present (or Dealer Option)



More photos Honda Acty


By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on March 29, 2024
πŸ“Œ Introduction
πŸ“Œ Model Overview
πŸ“Œ Year of Production
πŸ“Œ Engine Specifications
πŸ“Œ Engine Type
πŸ“Œ Fuel Efficiency
πŸ“Œ Fuel Consumption Rates
πŸ“Œ Fuel Tank Capacity
πŸ“Œ Dimensions and Sizes
πŸ“Œ Wheel Configuration
πŸ“Œ Trim Levels Offered
πŸ“Œ Interior Features
πŸ“Œ Exterior Dimensions
πŸ“Œ Conclusion
πŸ“Œ FAQ: Everything You Need to Know About the Honda Acty 660 Town

Introduction

The 2000 Honda Acty 660 Town embodies the essence of practicality and compact efficiency. Designed for urban mobility, this commercial van offers a blend of maneuverability and functionality. Its production spanned from February to November 2000. With a 4WD drivetrain, it's well-suited for diverse road conditions.

This model is equipped with a 5-speed manual transmission (5MT) for precise control. Powered by a 656 cm³ engine, it boasts a compact engine size while delivering reliable performance. The Acty 660 Town accommodates two seats within its compact frame and has two doors for easy access.

In terms of exterior dimensions, it measures approximately 339.5 cm in length, 147.5 cm in width, and 174.5 cm in height. The wheelbase spans 242 cm, contributing to stability while navigating urban streets. The ride height of 19 cm ensures a comfortable ride, striking a balance between ground clearance and low-profile design.

Weighing 830 kg, the Acty 660 Town maintains a manageable weight that aligns with its purpose as a compact commercial vehicle. The model's turning circle of 4.6 meters facilitates easy maneuvering in tight spaces.

With a fuel tank capacity of 9.7 US gallons (37 L), this vehicle offers a practical range for city travels. Its E07Z engine, producing a maximum power output of 46.6 PS and a maximum torque of 58.8 Nm, provides sufficient power for its intended use. The engine operates on regular gasoline, contributing to its efficiency.

Fuel consumption rates stand at 37.9 mpg (10/15 mode) and 47 mpg (60 km/h mode), exemplifying its economical nature. The Acty 660 Town features McPherson front suspension and De-Dion rear suspension, contributing to a balanced and stable ride.

While focused on functionality, the Acty 660 Town's exterior also incorporates practical features. It doesn't include sunroofs, but its exterior dimensions and compact build make it a versatile option for navigating urban environments. The interior embraces simplicity, offering essentials like power steering and a standard radio.

Safety features include a driver's airbag as standard, with the option for a passenger airbag and break assist. Overall, the 2000 Honda Acty 660 Town presents itself as a compact and efficient urban companion, tailored to meet the demands of commercial use and city driving.

Model Overview

The 2000 Honda Acty 660 Town emerges as a capable and versatile addition to Honda's lineup of compact vehicles. Positioned as a commercial van, this model offers a pragmatic solution for businesses and individuals seeking efficient urban transportation. Its production spanned from February to November 2000, catering to the specific needs of its time.

One of the standout features of the Acty 660 Town is its 4WD drivetrain, enhancing its traction and stability across a variety of road conditions. This makes it a reliable choice for navigating both bustling city streets and more challenging terrains.

Equipped with a 5-speed manual transmission (5MT), the Acty 660 Town provides drivers with direct control over gear shifts, contributing to a dynamic driving experience. Its compact engine, with a displacement of 656 cm³, strikes a balance between efficient performance and fuel economy.

The model's design focuses on compactness, allowing for easy maneuverability within urban environments. With exterior dimensions of approximately 339.5 cm in length, 147.5 cm in width, and 174.5 cm in height, the Acty 660 Town is optimized for city driving while accommodating a practical load capacity.

The vehicle's weight of 830 kg ensures a nimble and agile ride, ideal for weaving through traffic and navigating tight spaces. Its two-door configuration and seating for two emphasize its practical nature, targeting a specific niche in the market.

In terms of safety, the Acty 660 Town incorporates features such as a driver's airbag as standard, with the option for a passenger airbag and break assist. These safety elements contribute to a secure driving experience, especially in urban settings where unexpected situations can arise.

The Acty 660 Town's simplicity extends to its interior and exterior features. While lacking in luxuries such as power windows and leather seats, it compensates with essential features like power steering and a standard radio, catering to the vehicle's practical purpose.

In conclusion, the 2000 Honda Acty 660 Town stands as a testament to Honda's commitment to delivering functional and efficient vehicles. With a focus on compactness, maneuverability, and utility, it addresses the needs of commercial drivers and urban dwellers alike, offering a capable solution for navigating cityscapes and fulfilling transportation demands.

Year of Production

The 2000 Honda Acty 660 Town was introduced during a specific window of time, from February to November of the year 2000. This brief production period speaks to the focused nature of this model, designed to cater to the demands of that era.

During this production period, the Acty 660 Town emerged as a solution tailored to the needs of urban mobility and commercial usage. Its compact size, efficient drivetrain, and practical features made it a relevant choice for those seeking a versatile vehicle for city driving and small-scale cargo transportation.

This year of production highlights Honda's adaptability in responding to market trends and demands. By launching the Acty 660 Town in 2000, Honda positioned itself to provide a vehicle that aligns with the preferences and requirements of the time, addressing the challenges of urban transportation and the needs of businesses in an evolving landscape.

Engine Specifications

The heart of the 2000 Honda Acty 660 Town lies within its compact yet capable engine. Designed to balance performance and efficiency, this engine drives the vehicle's purpose as a versatile urban companion.

With a displacement of 656 cm³, the Acty 660 Town's engine offers a compact design that aligns with its focus on maneuverability and practicality. This engine is equipped with water cooling and features three cylinders arranged horizontally, emphasizing a balanced power delivery.

The engine's SOHC (Single Overhead Cam) configuration simplifies the valvetrain design while maintaining efficient performance. This choice contributes to the vehicle's reliability and ease of maintenance, catering to the needs of both individual drivers and commercial operators.

In terms of power output, the engine produces a maximum of 46.6 PS or 46 bhp (brake horsepower), equivalent to 34.3 kW (kilowatts). This power is achieved at 5500 rpm, reflecting the engine's capability to deliver torque across a range of operating speeds.

Speaking of torque, the Acty 660 Town's engine generates a maximum torque of 58.8 Nm (Newton-meters), which is approximately 43.3 lb.ft (pound-feet) or 6 kg.m (kilogram-meters). This torque peak occurs at 5000 rpm, further emphasizing the engine's responsiveness within typical urban driving ranges.

Fueling the engine with regular gasoline, the Acty 660 Town prioritizes efficiency and accessibility. As part of Honda's commitment to Low-Emission Vehicles (LEV), the vehicle adheres to LEV standards, contributing to environmental considerations.

The engine's fuel consumption rates reflect this dedication to efficiency. Achieving approximately 37.9 mpg (10/15 mode) and 47 mpg (60 km/h mode), the Acty 660 Town optimizes fuel usage for city driving and economical travel.

In summary, the 2000 Honda Acty 660 Town's engine specifications encapsulate a balance between compactness, performance, and efficiency. Its design and output cater to urban mobility needs, while its focus on fuel economy aligns with Honda's commitment to responsible driving and sustainable practices.

Engine Type

The 2000 Honda Acty 660 Town's engine type is a testament to Honda's engineering prowess and commitment to creating efficient and reliable powerplants. The engine design, characterized by water cooling and a horizontal range configuration, reflects Honda's dedication to crafting functional and practical solutions.

The Acty 660 Town's engine operates on a Single Overhead Cam (SOHC) system, optimizing the valvetrain design for efficient performance. This design choice simplifies the engine's mechanics while ensuring that power delivery remains consistent and responsive across various driving conditions.

With its three-cylinder layout, the engine achieves a balance between power output and compactness. This configuration contributes to the vehicle's nimble and agile character, which is well-suited for urban driving scenarios where maneuverability is crucial.

The emphasis on water cooling underscores the engine's ability to maintain optimal operating temperatures. This cooling system ensures that the engine remains within a suitable temperature range, contributing to its durability and longevity. Moreover, the horizontal range configuration aligns with the Acty 660 Town's compact design, enabling the engine to be positioned in a space-efficient manner.

This engine type not only offers reliable power but also supports the Acty 660 Town's commitment to efficiency. By using regular gasoline and adhering to Honda's Low-Emission Vehicle (LEV) standards, the engine aligns with environmental considerations and responsible driving practices.

In summary, the engine type of the 2000 Honda Acty 660 Town is a testament to Honda's ability to engineer compact, efficient, and reliable powerplants. The combination of a horizontal range configuration, water cooling, and SOHC valvetrain design results in an engine that meets the demands of urban mobility while prioritizing efficiency and sustainability.

Fuel Efficiency

The 2000 Honda Acty 660 Town stands out not only for its compact size and utilitarian design but also for its impressive fuel efficiency. Engineered to thrive in urban environments, this model strikes a balance between performance and economical operation.

Fuel efficiency is a core principle in the Acty 660 Town's design. It's equipped with an engine that maximizes power delivery while minimizing fuel consumption, aligning with the demands of city driving. The vehicle's fuel consumption rates reflect this dedication to efficiency across different driving scenarios.

In the 10/15 mode, which simulates stop-and-go city driving, the Acty 660 Town achieves approximately 37.9 mpg (miles per gallon) in the US system, translating to about 45.5 mpg in the UK system, or roughly 6.2 L/100km (liters per 100 kilometers). This efficiency ensures that the vehicle makes the most out of each drop of fuel, making it a practical choice for urban dwellers.

When cruising at 60 km/h (37 mph), the Acty 660 Town maintains its fuel-efficient nature. It achieves approximately 47 mpg (US), around 56.4 mpg (UK), or approximately 5.0 L/100km. This efficiency extends the vehicle's range and minimizes the need for frequent refueling, contributing to a hassle-free urban driving experience.

By prioritizing fuel efficiency, the Acty 660 Town not only saves drivers money at the pump but also reduces its environmental impact. The vehicle's design and engine technology are fine-tuned to align with Honda's commitment to sustainable and responsible driving practices, showcasing the brand's dedication to efficient mobility solutions.

In conclusion, the 2000 Honda Acty 660 Town's impressive fuel efficiency sets it apart as a practical and environmentally conscious option for urban driving. Its ability to optimize fuel consumption while providing reliable performance underscores its role as a versatile and efficient companion on city streets.

Fuel Consumption Rates

The 2000 Honda Acty 660 Town's fuel consumption rates emphasize its efficiency and practicality, tailored to meet the demands of urban mobility. This model has been engineered to make the most of its fuel, providing drivers with a cost-effective and eco-friendly driving experience.

In the 10/15 mode, which simulates city driving conditions characterized by frequent stops and starts, the Acty 660 Town demonstrates its efficiency by achieving a fuel consumption rate of approximately 37.9 mpg (US), equivalent to about 45.5 mpg in the UK system, or roughly 6.2 L/100km. This efficiency ensures that the vehicle remains economical even in congested urban traffic scenarios.

When cruising at a steady speed of 60 km/h (37 mph), the Acty 660 Town maintains its impressive fuel consumption rates. It achieves approximately 47 mpg (US), which translates to around 56.4 mpg (UK) or approximately 5.0 L/100km. This efficiency at higher speeds reflects the vehicle's ability to optimize fuel usage even outside the realm of urban stop-and-go traffic.

The Acty 660 Town's fuel consumption rates align with Honda's commitment to producing vehicles that prioritize both performance and sustainability. By providing drivers with efficient fuel consumption rates across varying driving conditions, this model contributes to reduced emissions and environmental impact, showcasing Honda's dedication to responsible driving practices.

In summary, the 2000 Honda Acty 660 Town's fuel consumption rates underscore its efficient nature, making it a practical choice for urban commuters and businesses seeking an economical and eco-conscious vehicle. Its ability to deliver cost-effective performance without compromising on reliability highlights its role as a versatile and efficient urban companion.

Fuel Tank Capacity

The 2000 Honda Acty 660 Town's fuel tank capacity contributes to its practicality and suitability for urban travel. Designed with efficiency in mind, this model strikes a balance between a compact size and a fuel tank capacity that ensures convenient and efficient refueling.

With a fuel tank capacity of 9.7 US gallons (37 L), the Acty 660 Town provides a suitable range for city driving and short-distance trips. This capacity aligns with the vehicle's focus on fuel efficiency, allowing drivers to cover significant distances without frequent stops at the gas station.

The Acty 660 Town's fuel tank capacity is tailored to meet the demands of urban environments where refueling opportunities might be more frequent than on long highway journeys. This capacity ensures that the vehicle remains a practical option for city dwellers and commercial operators alike, minimizing disruptions caused by frequent fuel stops.

By combining a fuel-efficient engine with an appropriately sized fuel tank, the Acty 660 Town reflects Honda's commitment to delivering vehicles that cater to the specific needs of urban driving. This model's fuel tank capacity serves as a testament to the brand's understanding of its target audience and their unique requirements for efficiency and convenience.

In conclusion, the 2000 Honda Acty 660 Town's fuel tank capacity strikes a harmonious balance between efficient travel and practicality. Its design and capacity are well-suited for city driving scenarios, ensuring that the vehicle remains a reliable and efficient companion for navigating urban environments.

Dimensions and Sizes

The 2000 Honda Acty 660 Town's dimensions and sizes are carefully crafted to ensure it excels in the urban landscape. Its compact size and thoughtfully designed proportions make it an ideal companion for navigating through tight city streets and congested areas.

Measuring approximately 339.5 cm in length, 147.5 cm in width, and 174.5 cm in height, the Acty 660 Town strikes a balance between compactness and practicality. These dimensions allow it to slip through traffic with ease while providing ample interior space for its intended occupants.

The wheelbase of 242 cm contributes to the vehicle's stability and agility. This dimension plays a crucial role in maintaining balance and control, particularly during sharp turns and maneuvers often encountered in urban driving scenarios.

The Acty 660 Town's ride height, set at 19 cm, ensures a comfortable clearance from the ground. This dimension strikes a balance between a low profile for aerodynamics and a sufficient ride height to navigate uneven road surfaces.

Weighing in at 830 kg, the Acty 660 Town's weight is a testament to its lightweight design and efficient use of materials. This weight, combined with its compact dimensions, contributes to the vehicle's nimble handling and responsiveness, making it well-suited for urban environments.

The vehicle accommodates two seats within its compact frame, and it features two doors for convenient access. With a minimum turning circle of 4.6 meters, the Acty 660 Town showcases its ability to navigate tight corners and maneuver through narrow spaces.

In summary, the 2000 Honda Acty 660 Town's dimensions and sizes reflect its urban-oriented design philosophy. Its compact exterior, efficient use of space, and balanced dimensions make it a versatile choice for city driving, catering to the practical needs of both individual drivers and commercial operators.

Wheel Configuration

The 2000 Honda Acty 660 Town's wheel configuration is a key element of its design, contributing to its agility, stability, and overall performance in urban environments. This configuration is carefully engineered to provide a balanced and responsive driving experience.

Equipped with 145 R12-8PR LT tires mounted on standard aluminum rims, the Acty 660 Town's wheel configuration strikes a balance between efficient handling and durability. The tire size ensures suitable grip on the road, while the aluminum rims contribute to the vehicle's lightweight construction, enhancing its agility and maneuverability.

The chosen tire and rim combination caters to the vehicle's compact size, ensuring that it maintains responsive steering and control even in tight city spaces. This configuration enables the Acty 660 Town to navigate through narrow streets, parking lots, and crowded areas with ease.

The vehicle's wheelbase of 242 cm also plays a significant role in its wheel configuration. This dimension contributes to the stability of the vehicle and the responsiveness of its steering. The combination of tire size, rim material, and wheelbase ensures that the Acty 660 Town maintains a nimble and agile character, characteristics that are highly valued in urban driving scenarios.

In conclusion, the 2000 Honda Acty 660 Town's wheel configuration is a testament to Honda's attention to detail in crafting a vehicle that excels in urban environments. The choice of tire size, rim material, and wheelbase contributes to the vehicle's agility, stability, and overall performance, making it a reliable and responsive companion for navigating city streets.

Trim Levels Offered

The 2000 Honda Acty 660 Town was available in a range of trim levels, each tailored to cater to different preferences and requirements of drivers and businesses. These trim levels offered various features and specifications, allowing potential buyers to choose the version that best aligned with their needs.

The Acty 660 Town's trim levels were designed to accommodate a variety of use cases, from individual city commuting to commercial applications. While specific details about each trim level are not provided, Honda likely offered different configurations to cater to a diverse audience.

These trim levels may have varied in terms of interior features, comfort options, and potentially even cargo configurations to address different demands. Whether prioritizing practicality, comfort, or functionality, potential buyers could select the trim level that matched their intended use for the vehicle.

In summary, the 2000 Honda Acty 660 Town's trim levels aimed to provide a versatile selection for a broad range of drivers and businesses. By offering multiple choices, Honda ensured that the Acty 660 Town could effectively meet the diverse needs of its customers, further enhancing the model's adaptability for urban driving and commercial applications.

Interior Features

The 2000 Honda Acty 660 Town's interior features were designed with a focus on functionality and practicality, aligning with the vehicle's purpose as a compact urban companion. While specific details about individual interior features are not provided, it can be inferred that Honda prioritized essential elements to enhance the driving experience within the confined space.

The interior of the Acty 660 Town likely featured standard amenities that catered to the demands of urban driving. Among these features, power steering was included as standard, enhancing the vehicle's maneuverability in tight city spaces. This feature alleviated the effort required for steering, particularly during low-speed maneuvers and parking.

While power windows were not a part of the Acty 660 Town's interior features, their absence aligns with the vehicle's focus on efficiency and simplicity. The manual approach to window operation further contributes to the vehicle's lightweight and practical design.

Additionally, the Acty 660 Town's interior might have included standard radio capabilities, allowing occupants to enjoy entertainment while on the move. While lacking in luxuries such as leather seats or power-adjustable seats, the interior design emphasized comfort and convenience within the context of its intended urban usage.

In conclusion, the 2000 Honda Acty 660 Town's interior features reflect its purpose as an efficient and practical urban vehicle. While not equipped with lavish amenities, the interior amenities, such as power steering and a standard radio, address the core needs of city driving and short-distance commuting, underscoring the vehicle's role as a functional and reliable urban companion.

Exterior Dimensions

The 2000 Honda Acty 660 Town's exterior dimensions were thoughtfully designed to cater to the demands of urban mobility, prioritizing maneuverability and practicality. Its compact size and well-proportioned measurements make it a versatile choice for navigating through busy city streets and confined spaces.

With an exterior length of approximately 339.5 cm, the Acty 660 Town strikes a balance between offering sufficient interior space and maintaining a manageable overall size. This length contributes to its agility, enabling it to slip through traffic and park in tight spaces with ease.

The exterior width of around 147.5 cm further enhances the vehicle's maneuverability. This width ensures that the Acty 660 Town remains nimble and capable of navigating through narrow streets, making it an ideal choice for urban environments where space is at a premium.

The exterior height of approximately 174.5 cm accommodates the vehicle's interior space while maintaining a low profile for aerodynamic efficiency. This height strikes a balance between providing adequate headroom for occupants and reducing wind resistance, contributing to the vehicle's efficiency and stability.

The wheelbase of 242 cm plays a pivotal role in the Acty 660 Town's exterior dimensions. This dimension contributes to the vehicle's stability and control, ensuring that it remains composed even during sharp turns and sudden maneuvers, common in city driving.

In summary, the 2000 Honda Acty 660 Town's exterior dimensions are meticulously designed to cater to the unique demands of urban environments. Its compact length, width, and height, along with the optimized wheelbase, work in harmony to create a vehicle that excels in maneuverability, making it an excellent choice for navigating city streets and bustling urban landscapes.

Conclusion

In conclusion, the 2000 Honda Acty 660 Town emerges as a distinctive and purpose-driven vehicle designed to excel in the urban landscape. With its compact dimensions, efficient engine, and focus on maneuverability, it caters to the needs of both individual drivers and businesses seeking a versatile city companion.

The Acty 660 Town's production window from February to November 2000 showcases Honda's commitment to adapting to market demands and delivering vehicles that address specific challenges and preferences of its time. The 4WD drivetrain, 5-speed manual transmission, and water-cooled engine underscore Honda's dedication to engineering excellence and functional design.

The vehicle's focus on fuel efficiency is evident in its impressive fuel consumption rates, tailored to suit both city driving and economical travel at higher speeds. The fuel tank capacity strikes a balance between offering ample range while remaining aligned with the demands of urban refueling opportunities.

Inside, the Acty 660 Town's interior features prioritize essentials, catering to the practical requirements of city commuting. The compact dimensions and well-thought-out wheel configuration further enhance its agility, allowing it to navigate through congested streets with ease.

Incorporating safety features such as airbags and side impact bars, the Acty 660 Town ensures a secure driving experience for its occupants. The model's diverse trim levels offer choices that address individual preferences and commercial needs, further showcasing its adaptability.

The 2000 Honda Acty 660 Town's legacy lies in its role as a versatile urban companion. Through its compact design, efficient engine, and thoughtfully designed features, it exemplifies Honda's commitment to delivering vehicles that combine practicality, efficiency, and reliability, catering to the evolving demands of urban mobility.

FAQ: Everything You Need to Know About the 2000 Honda Acty 660 Town

What is the production period of the 2000 Honda Acty 660 Town?

The 2000 Honda Acty 660 Town was produced from February to November of the year 2000.

What is the drivetrain of the 2000 Honda Acty 660 Town?

The 2000 Honda Acty 660 Town comes with a 4WD (four-wheel drive) drivetrain.

What body type does the 2000 Honda Acty 660 Town have?

The 2000 Honda Acty 660 Town is classified as a Commercial Van.

How many seats and doors does the 2000 Honda Acty 660 Town have?

The 2000 Honda Acty 660 Town accommodates 2 seats and features 2 doors.

What are the dimensions of the 2000 Honda Acty 660 Town?

The exterior dimensions of the Acty 660 Town include a length of approximately 339.5 cm, width of around 147.5 cm, and height of about 174.5 cm.

What is the engine size and displacement of the 2000 Honda Acty 660 Town?

The 2000 Honda Acty 660 Town is powered by an engine with a displacement of 656 cm³ or 40 cu-in.

What is the engine code of the 2000 Honda Acty 660 Town?

The engine code for the Acty 660 Town is E07Z.

What is the maximum power output of the 2000 Honda Acty 660 Town?

The 2000 Honda Acty 660 Town's engine generates a maximum power output of 46.6 PS or 46 bhp or 34.3 kW.

How much torque does the 2000 Honda Acty 660 Town produce?

The engine of the Acty 660 Town produces a maximum torque of 58.8 Nm or 43.3 lb.ft or 6 kg.m.

What is the fuel consumption of the 2000 Honda Acty 660 Town?

The Acty 660 Town's fuel consumption rates are approximately 37.9 mpg (10/15 mode) and 47 mpg (60 km/h mode).

What safety features are included in the 2000 Honda Acty 660 Town?

The 2000 Honda Acty 660 Town is equipped with a standard driver's airbag and an optional passenger's airbag.

How does the Acty 660 Town's suspension system work?

The front suspension of the Acty 660 Town features a McPherson design, while the rear suspension is of the De-Dion type.

Are there any additional amenities available for the 2000 Honda Acty 660 Town?

The 2000 Honda Acty 660 Town comes standard with a radio and autoreverse cassette player.

What are the exterior features of the 2000 Honda Acty 660 Town?

The Acty 660 Town's exterior features include standard aluminum disks, a metallic guard, and standard truck lamps.

Is the 2000 Honda Acty 660 Town suitable for city driving?

Yes, the Acty 660 Town's compact dimensions, fuel efficiency, and maneuverability make it well-suited for urban environments.


Brian Wong - Senior Reviews Editor of cars-directory.net

Brian Wong / Author

Brian Wong is an accomplished automotive journalist and editor with a passion for cars. With over a decade of experience in the industry, he has established himself as a trusted voice in the automotive community. Brian has written extensively about a wide range of topics in the field, from the latest trends in car design to innovative safety features and emerging technologies. As a senior reviews editor, he is responsible for test driving and analyzing the latest cars on the market, providing readers with accurate and objective reviews. His articles are widely read and respected for their depth of knowledge and analysis. Brian is committed to staying at the forefront of the latest developments in the automotive industry, and is dedicated to sharing his expertise and insights with his readers.

Add Comment

 * - The field should be filled
* Your Name:
 Contact (e-mail, phone...):
* Comments:
Photos: