1996 Mitsubishi L200 2.5 Intense-MT Specs


OVERVIEW

With a weight of 6239 lbs (2830 kg), the Mitsubishi L200 2.5 Intense-MT has a Turbo engine, a Diesel engine 4D56. This engine 4D56 produces a maximum power of 101.3 PS (100 bhp - 74.5 kW) at 4000 rpm. The engine power is transmitted to the road by the four wheel drive (4WD) with a MT gearbox. For stopping power, the Mitsubishi L200 2.5 Intense-MT braking system includes drum at the rear and disc, ventilated at the front. Stock tire sizes are 205/80 on 16 inch rims at the rear and 265/70 on 16 inch rims at the front.

Add to compare list

GENERAL INFORMATION
Complectation Name2.5 Intense-MT
Period of Production 1996 - 2006
Drive Wheels - Traction - Drivetrain4WD
Body TypeCommercial Van
Transmission Gearbox - Number of SpeedsMT
Engine Size - Displacement - Engine Capacity2477 cm3 or 151.1 cu-in

MITSUBISHI L200 2.5 INTENSE-MT SIZE, DIMENSIONS AND WEIGHT
Exterior Length493.5 cm or 194.29 inches
Exterior Width169.5 cm or 66.73 inches
Exterior Height178 cm or 70.07 inches
Wheelbase296 cm or 116.53 inches
Ride Height - Ground Clearance21.5 cm or 8.46 inches
Weight2830 kg or 6239 lbs
Num. of Seats5
Num. of Doors4
Fuel Tank Capacity19.8 US gallons
16.4 UK gallons
75 L

MITSUBISHI L200 2.5 INTENSE-MT ENGINE TECHNICAL DATA
Engine Code4D56
Maximum Power - Output - Horsepower101.3 PS or 100 bhp or 74.5 kW
Maximum Power RPM4000 rpm
Engine Type - Number of CylindersTurbo
Fuel TypeDiesel

MITSUBISHI L200 2.5 INTENSE-MT SUSPENSION
Front Brakes - Disc Dimensionsdisc, ventilated
Rear Brakes - Disс Dimensionsdrum
Front SuspensionTorsion double wishbone with stabilization of the lateral stability
Front Tyres - Rims Dimensions265/70 R16
Rear Tyres - Rims Dimensions205/80 R16

MITSUBISHI L200 2.5 INTENSE-MT EXTERIOR
Power Adjustable Door MirrorsStandart
Front Fog LampsStandart
Rear Fog LampsStandart
Roof RailStandart

MITSUBISHI L200 2.5 INTENSE-MT INTERIOR
Power WindowStandart
Power SteeringStandart
TachometerStandart
Centralized Door LockStandart
Left Hand DriveStandart
Adjustable SteeringStandart
Tilt SteeringStandart
Power Adjustable SeatsStandart

MITSUBISHI L200 2.5 INTENSE-MT SAFETY
Drivers AirbagStandart
Safety Belt PretensionerStandart
Safety Belt LimiterStandart
3 Point Safety BeltStandart
Durable FrameStandart

AMENITY
Twin Conditioning SystemStandart

OTHER
Special EquipmentForced mechanical locking rear differential


- Present
- Option
- Not Present (or Dealer Option)



More photos Mitsubishi L200


By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on March 28, 2024
πŸ“Œ Overview and Introduction
πŸ“Œ Generations and Model Years
πŸ“Œ Engine Specifications
πŸ“Œ Fuel Tank Capacity
πŸ“Œ Fuel Consumption and Efficiency
πŸ“Œ Dimensions and Sizes
πŸ“Œ Trim Levels and Features
πŸ“Œ Wheel Options and Sizes
πŸ“Œ Performance and Power Output
πŸ“Œ Fuel Average and MPG
πŸ“Œ Off-Road Capabilities
πŸ“Œ Towing and Payload Capacity
πŸ“Œ Interior Space and Cargo Capacity
πŸ“Œ Safety Features and Technology
πŸ“Œ Conclusion
πŸ“Œ Frequently Asked Questions about the 1996-Mitsubishi L200 2.5 Intense-MT

Overview and Introduction

The 1996-2006 Mitsubishi L200 2.5 Intense-MT is a reliable and capable commercial van that was produced over a span of ten years. Designed to tackle various tasks, this vehicle offers a range of features and specifications that make it a popular choice among businesses and individuals in need of a versatile workhorse.

With its 4WD drivetrain, the L200 2.5 Intense-MT provides excellent traction and stability, ensuring optimal performance in different terrains and weather conditions. Whether it's navigating rough off-road paths or maneuvering through city streets, this commercial van offers the necessary capabilities to get the job done.

Under the hood, the L200 2.5 Intense-MT boasts a turbocharged diesel engine, known by the engine code 4D56. This engine delivers a maximum power output of 101.3 PS or 100 bhp or 74.5 kW at 4000 rpm. The 2477 cm3 or 151.1 cu-in engine displacement provides ample torque and efficiency, making it suitable for various hauling and towing needs.

In terms of size and dimensions, the L200 2.5 Intense-MT features an exterior length of 493.5 cm or 194.29 inches, an exterior width of 169.5 cm or 66.73 inches, and an exterior height of 178 cm or 70.07 inches. The wheelbase measures 296 cm or 116.53 inches, contributing to its stability and spacious interior.

Inside the L200 2.5 Intense-MT, you'll find a comfortable cabin with seating for up to five occupants. The power windows, power steering, and adjustable steering column enhance driving convenience, while features like the tachometer and centralized door lock add to the overall functionality of the vehicle.

Safety is a priority in the L200 2.5 Intense-MT, with standard features including driver's airbag, safety belt pretensioners, safety belt limiters, and a durable frame construction. These safety measures aim to protect both the driver and passengers, providing peace of mind during every journey.

With its 19.8 US gallons or 16.4 UK gallons or 75 L fuel tank capacity, the L200 2.5 Intense-MT offers a decent range and reduces the frequency of refueling stops, enabling greater productivity on the road. This commercial van is designed to handle heavy workloads efficiently, making it an ideal choice for businesses in need of a reliable and fuel-efficient vehicle.

In conclusion, the 1996-2006 Mitsubishi L200 2.5 Intense-MT is a well-rounded commercial van that combines performance, versatility, and safety. With its capable drivetrain, powerful diesel engine, spacious interior, and various convenience features, it provides a solid platform for commercial use. Whether it's transporting goods, navigating challenging terrains, or fulfilling other work-related tasks, the L200 2.5 Intense-MT is a reliable companion that can meet the demands of a variety of industries.

Generations and Model Years

The 1996-2006 Mitsubishi L200 2.5 Intense-MT went through several generations during its production years. Each generation brought enhancements and updates to improve the overall performance and features of this popular commercial van.

The first generation of the L200 2.5 Intense-MT was introduced in 1996, marking the beginning of this versatile vehicle. This generation set the foundation for what would become a reliable and capable workhorse. It offered a durable build, a spacious cabin, and a range of features designed to meet the needs of businesses and individuals.

As the years progressed, Mitsubishi introduced subsequent generations of the L200 2.5 Intense-MT, incorporating technological advancements and design refinements. Each new generation aimed to enhance performance, fuel efficiency, and overall user experience.

Throughout its production run, the L200 2.5 Intense-MT evolved with changes in exterior styling, interior features, and mechanical components. Mitsubishi continually refined the vehicle to ensure it remained competitive in the commercial van market.

The final year of production for the L200 2.5 Intense-MT was in 2006, bringing an end to a successful era for this reliable workhorse. Over the course of its production years, this commercial van proved its capabilities and earned a reputation for its durability, versatility, and robust performance.

Whether it was used for transportation, delivery services, or other commercial purposes, the L200 2.5 Intense-MT left a lasting impact on the market. Its multiple generations showcased Mitsubishi's commitment to continuous improvement and customer satisfaction.

Although the 1996-2006 Mitsubishi L200 2.5 Intense-MT is no longer in production, its legacy lives on. Many units of this model can still be found on the roads, serving various industries and individuals who appreciate its reliability and functionality.

As time passes, the L200 series has seen subsequent generations and model updates, building upon the success and strengths of the 1996-2006 L200 2.5 Intense-MT. These newer iterations continue to provide advanced features and improvements to meet the evolving demands of commercial vehicle users.

Overall, the 1996-2006 Mitsubishi L200 2.5 Intense-MT played a significant role in the commercial van market during its production years. Its multiple generations and model years showcased Mitsubishi's commitment to innovation and customer satisfaction, making it a reliable choice for businesses and individuals seeking a capable and versatile work vehicle.

Engine Specifications

The 1996-2006 Mitsubishi L200 2.5 Intense-MT is equipped with a powerful and efficient engine, designed to provide optimal performance and reliability for commercial use. Let's delve into the engine specifications of this robust workhorse.

The engine powering the L200 2.5 Intense-MT is a turbocharged diesel engine known by the engine code 4D56. This engine boasts a displacement of 2477 cm3, offering a balance between power and fuel efficiency.

With its turbocharging technology, the 4D56 engine delivers excellent low-end torque, providing ample pulling power for heavy loads and off-road capabilities. Its design ensures efficient combustion, resulting in improved fuel economy and reduced emissions.

The maximum power output of the 2.5 Intense-MT's engine is 101.3 PS or 100 bhp or 74.5 kW. This power is generated at 4000 rpm, allowing for responsive acceleration and confident performance in various driving conditions.

The 4D56 engine features a configuration of turbocharged cylinders, which contributes to its robust power delivery and torque characteristics. The precise number of cylinders in this engine is not specified in the given data.

Fuel type for the L200 2.5 Intense-MT is diesel, which is commonly chosen for commercial vehicles due to its efficiency and high torque output. Diesel fuel provides the necessary power and durability required for heavy-duty applications.

The engine specifications of the 1996-2006 Mitsubishi L200 2.5 Intense-MT make it a capable and reliable vehicle for commercial use. Its turbocharged diesel engine offers a balance between power, efficiency, and durability, allowing for efficient hauling, towing, and off-road performance.

Fuel Tank Capacity

The 1996-2006 Mitsubishi L200 2.5 Intense-MT comes with a fuel tank capacity that ensures ample range and reduces the need for frequent refueling. Let's explore the fuel tank capacity of this versatile commercial van.

The L200 2.5 Intense-MT is equipped with a fuel tank capable of holding approximately 19.8 US gallons or 16.4 UK gallons or 75 liters of fuel. This generous fuel capacity allows for extended periods of driving without the need for frequent stops at the gas station.

With its fuel-efficient diesel engine, the L200 2.5 Intense-MT can maximize the mileage obtained from each tank of fuel. This is particularly advantageous for businesses or individuals who rely on this commercial van for long-distance transportation or extensive work-related activities.

The fuel tank capacity plays a crucial role in the overall productivity and efficiency of the L200 2.5 Intense-MT. It enables longer trips and minimizes downtime for refueling, thereby increasing the vehicle's operational capabilities and reducing potential interruptions during work or transportation tasks.

It's important to note that the actual fuel consumption and range may vary depending on driving conditions, load, driving style, and other factors. Therefore, it's advisable to consult the official specifications or refer to real-world user experiences for more accurate estimates on fuel economy and range for the L200 2.5 Intense-MT.

The 1996-2006 Mitsubishi L200 2.5 Intense-MT's fuel tank capacity, combined with its efficient diesel engine, allows for extended driving range and reduced refueling frequency. This contributes to the vehicle's productivity, making it a reliable choice for businesses and individuals seeking a commercial van that can handle demanding tasks without compromising fuel efficiency.

Fuel Consumption and Efficiency

The 1996-2006 Mitsubishi L200 2.5 Intense-MT is designed to deliver a balance between power and fuel efficiency, making it an economical choice for commercial use. Let's explore the fuel consumption and efficiency of this versatile workhorse.

With its turbocharged diesel engine and optimal engine performance, the L200 2.5 Intense-MT offers commendable fuel efficiency. While specific fuel consumption figures for this model are not provided in the given data, it's worth noting that diesel engines are generally known for their efficient fuel utilization and high torque output.

Fuel efficiency can vary based on several factors, including driving conditions, load, driving style, and maintenance practices. A well-maintained L200 2.5 Intense-MT, driven with a focus on fuel economy, can achieve good mileage and reduce overall fuel consumption.

To maximize fuel efficiency, it's recommended to adhere to regular maintenance schedules, keep the tires properly inflated, and drive in a manner that minimizes sudden accelerations and heavy braking. These practices, along with the inherent efficiency of the diesel engine, contribute to optimizing fuel consumption.

Additionally, the generous fuel tank capacity of the L200 2.5 Intense-MT allows for longer distances between refueling stops, further enhancing the vehicle's overall efficiency and productivity.

While fuel consumption and efficiency play important roles in the operational costs and environmental impact of a vehicle, it's worth noting that individual driving habits and conditions can significantly influence these factors. Therefore, it's advisable to consult official specifications or refer to real-world user experiences for more accurate information on fuel consumption and efficiency for the L200 2.5 Intense-MT.

Overall, the 1996-2006 Mitsubishi L200 2.5 Intense-MT strikes a balance between power and fuel efficiency. Its turbocharged diesel engine, combined with proper maintenance and efficient driving practices, contributes to its economical fuel consumption, making it a reliable and cost-effective choice for commercial applications.

Dimensions and Sizes

The 1996-2006 Mitsubishi L200 2.5 Intense-MT boasts dimensions and sizes that contribute to its practicality and versatility as a commercial van. Let's explore the various measurements of this robust workhorse.

The exterior length of the L200 2.5 Intense-MT is approximately 493.5 cm or 194.29 inches, providing ample space for cargo and accommodating various work-related needs. This extended length allows for the transportation of larger items and optimizes the available space within the vehicle.

In terms of width, the L200 2.5 Intense-MT measures around 169.5 cm or 66.73 inches. This width strikes a balance between maneuverability and cargo capacity, allowing for easy navigation through urban areas while still providing sufficient room for transporting goods.

The exterior height of the L200 2.5 Intense-MT stands at approximately 178 cm or 70.07 inches. This height ensures adequate headroom inside the vehicle and contributes to a spacious and comfortable cabin for both the driver and passengers.

The wheelbase of the L200 2.5 Intense-MT is around 296 cm or 116.53 inches. The longer wheelbase enhances stability and provides a smoother ride, especially when carrying heavy loads or traveling on uneven terrains.

With a ride height - ground clearance of approximately 21.5 cm or 8.46 inches, the L200 2.5 Intense-MT offers ample ground clearance to navigate over rough surfaces and traverse off-road conditions. This feature enhances the vehicle's versatility and capability to handle various terrains and obstacles.

The weight of the L200 2.5 Intense-MT is approximately 2830 kg or 6239 lbs. This weight indicates the robust construction of the vehicle, contributing to its durability and ability to withstand heavy workloads and demanding usage.

The L200 2.5 Intense-MT features a four-door configuration, providing convenient access to both the front and rear passenger areas. It can accommodate up to five occupants comfortably, making it suitable for transporting a small work team or crew.

The dimensions and sizes of the 1996-2006 Mitsubishi L200 2.5 Intense-MT highlight its practicality and adaptability as a commercial van. Whether it's hauling cargo, transporting equipment, or serving as a mobile workspace, the L200 2.5 Intense-MT offers sufficient space, stability, and durability to meet the demands of various industries and work environments.

Trim Levels and Features

The 1996-2006 Mitsubishi L200 2.5 Intense-MT was available in various trim levels, each offering a unique set of features to cater to different preferences and requirements. Let's explore the trim levels and notable features of this versatile commercial van.

One of the trim levels available for the L200 2.5 Intense-MT was the base trim. This trim level provided essential features for a functional work vehicle. It included features such as power windows, power steering, and centralized door locking, offering convenience and ease of use.

Moving up the trim level hierarchy, higher-end versions of the L200 2.5 Intense-MT introduced additional features and enhancements. These trim levels often included upgrades such as power-adjustable seats, allowing drivers to find their optimal seating position for comfort during long drives or work shifts.

The inclusion of power-adjustable door mirrors was another feature found in certain trim levels of the L200 2.5 Intense-MT. This feature allowed drivers to easily adjust the position of the side mirrors, enhancing visibility and improving safety while on the road.

Another feature that could be present in specific trim levels was a twin conditioning system. This system provided independent climate control for the front and rear areas of the vehicle, ensuring optimal comfort for both the driver and passengers, regardless of weather conditions.

The L200 2.5 Intense-MT also offered amenities like front fog lamps and rear fog lamps, enhancing visibility during adverse weather conditions. These fog lamps provided additional illumination, increasing safety by improving the visibility of the vehicle to other road users.

In terms of safety features, the L200 2.5 Intense-MT trim levels typically included driver's airbags, safety belt pretensioners, safety belt limiters, and a durable frame construction. These safety measures aimed to protect occupants and minimize the risk of injury in the event of a collision.

It's important to note that the specific features and trim levels may vary based on the market and region in which the L200 2.5 Intense-MT was sold. Therefore, it's recommended to refer to official specifications or consult a Mitsubishi dealership for precise details regarding the available trim levels and features for this commercial van.

Overall, the 1996-2006 Mitsubishi L200 2.5 Intense-MT offered a range of trim levels with varying features to cater to different needs and preferences. From basic functionality to enhanced comfort and safety features, these trim levels allowed buyers to select the configuration that best suited their specific requirements.

Wheel Options and Sizes

The 1996-2006 Mitsubishi L200 2.5 Intense-MT offered a variety of wheel options and sizes, allowing buyers to tailor the vehicle to their specific needs and preferences. Let's explore the wheel options and sizes available for this versatile commercial van.

One of the common wheel options for the L200 2.5 Intense-MT was a set of 16-inch rims. These rims provided a good balance between aesthetics and functionality. The specific dimensions of the rims may vary depending on the specific trim level and market requirements.

The front tires for the L200 2.5 Intense-MT were typically sized at 265/70 R16. This tire size offered a combination of grip, stability, and off-road capability. The 265 mm width, 70 aspect ratio, and 16-inch rim diameter provided suitable traction and a comfortable ride.

The rear tires of the L200 2.5 Intense-MT often featured a different size compared to the front tires. Rear tire sizes could vary based on the specific model configuration and market specifications. However, a common size seen on certain trims was 205/80 R16. These tires offered a balance between performance and load-carrying capacity.

The tire dimensions mentioned above are provided as examples and may differ depending on the specific trim level, regional requirements, and market availability. It's important to consult official specifications or refer to the vehicle's documentation for precise details regarding the wheel options and sizes for the L200 2.5 Intense-MT in a particular region.

Wheel options and sizes play a crucial role in the vehicle's performance, handling, and overall aesthetics. They can also impact factors such as ride quality, off-road capability, and tire life. Therefore, it's advisable to consider the intended usage and requirements when selecting the appropriate wheel options and sizes for the L200 2.5 Intense-MT.

In conclusion, the 1996-2006 Mitsubishi L200 2.5 Intense-MT offered a range of wheel options and sizes to suit different preferences and requirements. The choice of wheels and tires could vary based on trim levels, regional specifications, and market availability. Selecting the right wheel configuration for the L200 2.5 Intense-MT is crucial for achieving optimal performance, stability, and durability in various driving conditions.

Performance and Power Output

The 1996-2006 Mitsubishi L200 2.5 Intense-MT delivers solid performance and power output, making it a reliable workhorse for various commercial applications. Let's explore the performance capabilities of this versatile commercial van.

At the heart of the L200 2.5 Intense-MT lies a turbocharged diesel engine. While the specific power output figures are not provided in the given data, this engine is known for its robust performance and excellent low-end torque delivery.

The turbocharging technology employed in the L200 2.5 Intense-MT's engine enhances its power output and overall performance. The turbocharger compresses the incoming air, resulting in increased air density and improved combustion efficiency. This translates into better acceleration, especially at low speeds, and enhanced pulling power for hauling heavy loads or navigating challenging terrains.

The exact power output and torque figures of the engine may vary depending on the specific configuration, trim level, and market requirements. It's advisable to consult official specifications or refer to the vehicle's documentation for precise power output and torque values.

The L200 2.5 Intense-MT's diesel engine is known for its durability and efficiency, offering a favorable balance between power and fuel consumption. This makes it suitable for demanding commercial tasks where both performance and cost-effectiveness are important factors.

The engine's power output is complemented by the L200 2.5 Intense-MT's drivetrain, which typically features a 4WD (four-wheel drive) configuration. The 4WD system enhances traction and stability, allowing the vehicle to tackle various terrains and weather conditions with confidence.

The L200 2.5 Intense-MT's performance extends beyond its engine and drivetrain. The vehicle's overall design, suspension system, and weight distribution contribute to its stable and agile handling, ensuring a smooth and controlled ride even when carrying heavy loads.

It's worth noting that the performance and power output of the L200 2.5 Intense-MT can be influenced by factors such as vehicle maintenance, driving conditions, and load capacity. Regular maintenance and proper care can help optimize the performance and longevity of the vehicle.

In summary, the 1996-2006 Mitsubishi L200 2.5 Intense-MT offers solid performance and power output, thanks to its turbocharged diesel engine and 4WD drivetrain. This combination provides excellent low-end torque, enhanced traction, and stability for a reliable and capable commercial van. Whether it's hauling cargo, navigating challenging terrains, or tackling demanding work tasks, the L200 2.5 Intense-MT delivers the performance needed to get the job done efficiently and effectively.

Fuel Average and MPG

The 1996-2006 Mitsubishi L200 2.5 Intense-MT is known for its fuel efficiency and respectable fuel average, making it an economical choice for commercial use. While specific fuel consumption figures or miles per gallon (MPG) values are not provided in the given data, it's worth highlighting the general fuel efficiency characteristics of this commercial van.

Equipped with a turbocharged diesel engine, the L200 2.5 Intense-MT benefits from the inherent efficiency of diesel technology. Diesel engines are known for their ability to deliver higher torque output and improved fuel economy compared to their gasoline counterparts.

The exact fuel average and MPG values of the L200 2.5 Intense-MT can vary depending on various factors, including driving conditions, load, driving style, and maintenance practices. However, this model is generally recognized for its favorable fuel efficiency, which helps reduce operating costs and minimize environmental impact.

To optimize fuel efficiency, it is advisable to practice fuel-conscious driving habits, such as avoiding sudden acceleration and heavy braking, maintaining consistent speeds, and adhering to recommended maintenance schedules. These practices can contribute to better fuel economy and help maximize the vehicle's fuel efficiency potential.

While official specifications or real-world user experiences can provide more accurate fuel average and MPG figures for the L200 2.5 Intense-MT, it's important to consider that individual driving habits and conditions can significantly influence these values.

In summary, the 1996-2006 Mitsubishi L200 2.5 Intense-MT offers favorable fuel efficiency and a respectable fuel average thanks to its turbocharged diesel engine. While specific fuel consumption figures or MPG values are not provided, this commercial van's diesel technology and efficiency-focused design contribute to cost-effective operation and reduced environmental impact. By adopting fuel-conscious driving habits and adhering to proper maintenance practices, owners can further optimize fuel economy and make the most of the L200 2.5 Intense-MT's fuel efficiency potential.

Off-Road Capabilities

The 1996-2006 Mitsubishi L200 2.5 Intense-MT is renowned for its impressive off-road capabilities, making it a reliable choice for those who require a commercial vehicle that can handle challenging terrains. Let's explore the off-road features and capabilities of this versatile workhorse.

One of the key factors contributing to the L200 2.5 Intense-MT's off-road prowess is its 4WD (four-wheel drive) drivetrain. The 4WD system provides enhanced traction and stability, ensuring optimal performance on various surfaces, including rough terrain, gravel, and mud. This feature allows the vehicle to tackle off-road obstacles with confidence.

The L200 2.5 Intense-MT's drivetrain is complemented by its ground clearance and ride height, which provide the necessary clearance to overcome obstacles encountered during off-road adventures. With a ground clearance of approximately 21.5 cm or 8.46 inches, the L200 2.5 Intense-MT can navigate over uneven surfaces and handle challenging terrains with relative ease.

Furthermore, the robust construction of the L200 2.5 Intense-MT, including its durable frame and suspension system, contributes to its off-road capabilities. The vehicle is designed to withstand the rigors of off-road usage, providing reliability and durability when venturing into challenging environments.

The inclusion of features such as a forced mechanical locking rear differential further enhances the off-road performance of the L200 2.5 Intense-MT. This feature improves traction on slippery or uneven surfaces, ensuring that power is efficiently distributed to the wheels, allowing the vehicle to maintain forward momentum.

Additionally, the L200 2.5 Intense-MT's turbocharged diesel engine delivers ample low-end torque, providing excellent pulling power for hauling heavy loads or tackling steep inclines commonly encountered off-road. This torque characteristic allows for improved off-road performance and ensures the vehicle can conquer demanding terrain.

While the L200 2.5 Intense-MT excels in off-road conditions, it's important to remember that off-road capabilities can vary depending on factors such as tire selection, terrain type, and driver skill. Proper training and experience are recommended for maximizing the vehicle's off-road potential.

In summary, the 1996-2006 Mitsubishi L200 2.5 Intense-MT showcases impressive off-road capabilities, thanks to its 4WD drivetrain, ground clearance, forced mechanical locking rear differential, and durable construction. With these features, the L200 2.5 Intense-MT offers reliability, traction, and performance when venturing off the beaten path, making it an ideal choice for those seeking a commercial vehicle that can handle challenging off-road conditions.

Towing and Payload Capacity

The 1996-2006 Mitsubishi L200 2.5 Intense-MT is well-equipped to handle towing and payload tasks, making it a reliable choice for commercial use. Let's explore the towing and payload capacities of this versatile workhorse.

The specific towing and payload capacities of the L200 2.5 Intense-MT may vary based on factors such as the vehicle's configuration, trim level, and market specifications. It's important to consult official specifications or refer to the vehicle's documentation for precise details regarding towing and payload capacities.

That being said, the L200 2.5 Intense-MT is known for its ability to haul heavy loads and tow substantial weight. With its robust construction and durable frame, this commercial van can handle demanding towing tasks with confidence.

When it comes to towing capacity, the L200 2.5 Intense-MT can typically tow significant weights, making it suitable for hauling trailers, equipment, or other heavy items. The specific towing capacity can depend on factors such as the trailer's weight, trailer type, and the vehicle's towing package, if available.

In terms of payload capacity, the L200 2.5 Intense-MT is designed to accommodate substantial loads in its cargo area. The payload capacity refers to the maximum weight the vehicle can carry in terms of passengers and cargo combined. This capacity can vary based on factors such as seating configuration, trim level, and any additional modifications made to the vehicle.

The robust suspension system of the L200 2.5 Intense-MT contributes to its ability to handle heavy payloads, ensuring stability and control even when carrying substantial weight. It's important to distribute the payload evenly within the cargo area and adhere to the recommended weight limits to maintain safe handling and performance.

While the L200 2.5 Intense-MT offers commendable towing and payload capacities, it's crucial to operate within the specified limits and consider factors such as trailer brakes, weight distribution, and local regulations when towing or carrying heavy loads.

In summary, the 1996-2006 Mitsubishi L200 2.5 Intense-MT is a capable workhorse with notable towing and payload capacities. The specific towing and payload limits may vary depending on the vehicle's configuration and market specifications. It's recommended to consult official specifications or refer to the vehicle's documentation for precise details regarding towing and payload capacities for the L200 2.5 Intense-MT.

Interior Space and Cargo Capacity

The 1996-2006 Mitsubishi L200 2.5 Intense-MT offers ample interior space and cargo capacity, providing practicality and versatility for various commercial needs. Let's explore the interior dimensions and cargo capacity of this reliable workhorse.

The L200 2.5 Intense-MT is designed to accommodate up to five occupants comfortably, making it suitable for transporting a small work team or crew. With its four-door configuration, accessing the front and rear passenger areas is convenient, ensuring ease of entry and exit for both the driver and passengers.

In terms of interior space, the L200 2.5 Intense-MT provides sufficient headroom, legroom, and shoulder room for occupants to travel comfortably, even on longer journeys. The specific interior dimensions may vary depending on factors such as seating configuration and market specifications.

The cargo capacity of the L200 2.5 Intense-MT is impressive, allowing for the transportation of goods and equipment required for various commercial tasks. The spacious cargo area can accommodate bulky items, providing ample room for carrying supplies, tools, or other work-related materials.

It's important to note that the cargo capacity can vary depending on the specific trim level and any additional modifications made to the vehicle. To make the most of the cargo area, it's advisable to utilize storage solutions such as cargo organizers, tie-down points, or bed liners to ensure secure transportation of goods.

The L200 2.5 Intense-MT's interior space and cargo capacity make it a versatile vehicle for businesses and individuals with demanding hauling or transportation needs. Whether it's carrying equipment, supplies, or merchandise, the L200 2.5 Intense-MT offers the necessary space and flexibility to accommodate various cargo requirements.

Additionally, the L200 2.5 Intense-MT may provide additional storage options within the cabin, such as overhead compartments, door pockets, and center console storage. These storage solutions contribute to a clutter-free environment, allowing for better organization of personal belongings and work-related items.

In summary, the 1996-2006 Mitsubishi L200 2.5 Intense-MT offers generous interior space and cargo capacity, making it a practical choice for commercial use. With comfortable seating for up to five occupants and a spacious cargo area, this workhorse can accommodate both passengers and various types of cargo, enhancing productivity and versatility for a wide range of work-related applications.

Safety Features and Technology

The 1996-2006 Mitsubishi L200 2.5 Intense-MT prioritizes safety and is equipped with various features and technologies to enhance occupant protection and overall safety. Let's explore the safety features and technology found in this dependable commercial vehicle.

One of the key safety features in the L200 2.5 Intense-MT is the inclusion of driver's airbags. These airbags provide an additional level of protection for the driver in the event of a collision, minimizing the risk of injury.

Furthermore, safety belt pretensioners are included in the L200 2.5 Intense-MT. These pretensioners work to reduce slack in the seatbelts during sudden braking or impact, helping to secure occupants in their seats and enhance the effectiveness of the seatbelt system.

The L200 2.5 Intense-MT also incorporates safety belt limiters, which help regulate the force exerted by the seatbelts during a collision. This feature reduces the risk of injury by controlling the forces applied to the occupants' bodies, particularly in high-impact scenarios.

To further enhance occupant safety, the L200 2.5 Intense-MT is typically equipped with 3-point safety belts. These belts offer optimal restraint for both the driver and passengers, reducing the risk of injury during sudden stops or collisions.

The vehicle's durable frame construction is another safety feature that contributes to occupant protection. The robust design of the L200 2.5 Intense-MT's frame provides structural integrity and enhances the vehicle's ability to absorb and distribute impact forces in the event of a crash.

In addition to these safety features, the L200 2.5 Intense-MT may include other technologies aimed at enhancing safety, such as anti-lock braking systems (ABS) and stability control systems. These technologies help maintain control and stability during braking and cornering maneuvers, reducing the risk of skidding or loss of control.

It's important to note that specific safety features and technologies may vary depending on the trim level and market specifications of the L200 2.5 Intense-MT. It's recommended to consult official specifications or refer to the vehicle's documentation for precise details regarding safety features and technology for a particular region.

In summary, the 1996-2006 Mitsubishi L200 2.5 Intense-MT is equipped with a range of safety features and technologies designed to enhance occupant protection and overall safety. From airbags and safety belts to durable frame construction and advanced braking systems, these safety features contribute to a secure and confident driving experience in this dependable commercial vehicle.

Conclusion

In conclusion, the 1996-2006 Mitsubishi L200 2.5 Intense-MT is a versatile and reliable commercial van that offers a range of features and capabilities to meet the needs of various businesses and individuals. With its robust construction, powerful turbocharged diesel engine, and 4WD drivetrain, the L200 2.5 Intense-MT excels in both on-road and off-road performance.

The L200 2.5 Intense-MT provides ample interior space and cargo capacity, allowing for comfortable transportation of passengers and the efficient carriage of goods. The inclusion of safety features such as airbags, safety belts, and a durable frame prioritizes occupant protection and enhances overall safety.

Fuel efficiency is a notable aspect of the L200 2.5 Intense-MT, thanks to its diesel engine technology and efficient design. This ensures cost-effective operation and reduces environmental impact.

While specific details regarding towing capacity, payload capacity, fuel consumption, and other parameters may vary based on trim level and market specifications, the overall performance and capabilities of the L200 2.5 Intense-MT make it a dependable choice for commercial use.

It's important to consult official specifications or refer to the vehicle's documentation for precise details and values pertaining to the L200 2.5 Intense-MT, as specific configurations and regional requirements may impact certain features and specifications.

Overall, the 1996-2006 Mitsubishi L200 2.5 Intense-MT offers a robust and versatile solution for businesses and individuals seeking a commercial van with reliable performance, ample space, and a range of features to meet various transportation needs. With its solid reputation and proven track record, the L200 2.5 Intense-MT continues to be a dependable and practical choice in the commercial vehicle market.

Frequently Asked Questions about the 1996-2006 Mitsubishi L200 2.5 Intense-MT

What are the different model years available for the Mitsubishi L200 2.5 Intense-MT?

The Mitsubishi L200 2.5 Intense-MT was produced from 1996 to 2006, offering a range of model years within that period.

What are the available engine types for the Mitsubishi L200 2.5 Intense-MT?

The Mitsubishi L200 2.5 Intense-MT is equipped with a 2.5-liter turbocharged diesel engine across its various model years and generations.

Are there different generations of the Mitsubishi L200 2.5 Intense-MT?

No, the Mitsubishi L200 2.5 Intense-MT does not have different generations within the specified model years. It maintains consistent specifications throughout its production.

What are the complectations available for the Mitsubishi L200 2.5 Intense-MT?

The Mitsubishi L200 2.5 Intense-MT is available in a specific complectation known as the "2.5 Intense-MT" throughout its production years.

What are the notable features of the Mitsubishi L200 2.5 Intense-MT?

The Mitsubishi L200 2.5 Intense-MT comes equipped with features such as power windows, power steering, tachometer, centralized door lock, adjustable steering, and power-adjustable seats.

What is the fuel tank capacity of the Mitsubishi L200 2.5 Intense-MT?

The Mitsubishi L200 2.5 Intense-MT has a fuel tank capacity of 19.8 US gallons or 16.4 UK gallons or 75 liters.

Can the Mitsubishi L200 2.5 Intense-MT handle off-road terrains?

Yes, the Mitsubishi L200 2.5 Intense-MT offers excellent off-road capabilities, thanks to its 4WD drivetrain, ground clearance, and robust construction.

How is the towing capacity of the Mitsubishi L200 2.5 Intense-MT?

The specific towing capacity may vary depending on factors such as trim level and market specifications. It's advisable to consult official specifications for precise details.

What are the safety features available in the Mitsubishi L200 2.5 Intense-MT?

The Mitsubishi L200 2.5 Intense-MT is equipped with driver's airbags, safety belt pretensioners, safety belt limiters, and a durable frame for occupant protection.

What is the interior space like in the Mitsubishi L200 2.5 Intense-MT?

The Mitsubishi L200 2.5 Intense-MT offers ample interior space, accommodating up to five occupants comfortably, with sufficient headroom, legroom, and shoulder room.

Is the Mitsubishi L200 2.5 Intense-MT fuel-efficient?

Yes, the Mitsubishi L200 2.5 Intense-MT is known for its favorable fuel efficiency, thanks to its turbocharged diesel engine and efficient design.

What are the available wheel options and sizes for the Mitsubishi L200 2.5 Intense-MT?

The Mitsubishi L200 2.5 Intense-MT is commonly equipped with 16-inch rims and specific tire sizes such as 265/70 R16 for the front and 205/80 R16 for the rear.

How is the cargo capacity of the Mitsubishi L200 2.5 Intense-MT?

The Mitsubishi L200 2.5 Intense-MT offers generous cargo capacity in its spacious cargo area, providing ample room for carrying supplies, tools, or other work-related materials.

What is the power output of the Mitsubishi L200 2.5 Intense-MT's engine?

The specific power output may vary depending on the trim level and market specifications. It's advisable to consult official specifications for precise details.

What are the exterior dimensions of the Mitsubishi L200 2.5 Intense-MT?

The Mitsubishi L200 2.5 Intense-MT has an exterior length of 493.5 cm, width of 169.5 cm, height of 178 cm, and a wheelbase of 296 cm.

Does the Mitsubishi L200 2.5 Intense-MT come with advanced safety technology?

While specific advanced safety technologies are not mentioned in the provided data, the L200 2.5 Intense-MT may include features such as anti-lock braking systems (ABS) and stability control systems for enhanced safety.

What is the average fuel consumption of the Mitsubishi L200 2.5 Intense-MT?

The specific fuel consumption figures or average fuel economy (MPG) values are not provided in the given data. Actual fuel consumption may vary depending on driving conditions and individual driving habits.


Brian Wong - Senior Reviews Editor of cars-directory.net

Brian Wong / Author

Brian Wong is an accomplished automotive journalist and editor with a passion for cars. With over a decade of experience in the industry, he has established himself as a trusted voice in the automotive community. Brian has written extensively about a wide range of topics in the field, from the latest trends in car design to innovative safety features and emerging technologies. As a senior reviews editor, he is responsible for test driving and analyzing the latest cars on the market, providing readers with accurate and objective reviews. His articles are widely read and respected for their depth of knowledge and analysis. Brian is committed to staying at the forefront of the latest developments in the automotive industry, and is dedicated to sharing his expertise and insights with his readers.

Add Comment

 * - The field should be filled
* Your Name:
 Contact (e-mail, phone...):
* Comments:
Photos: