1992 Mitsubishi Lancer 2.0DT MX saloon Specs
OVERVIEW
With a fuel consumption of 71.2 mpg US - 85.6 mpg UK - 3.3 L/100km, a weight of 2336 lbs (1060 kg), the Mitsubishi Lancer 2.0DT MX saloon has a water cooling 4 cylinder SOHC8 valve engine, a Light oil engine 4D68. This engine 4D68 produces a maximum power of 89.2 PS (88 bhp - 65.6 kW) at 4500 rpm and a maximum torque of 176.5 Nm (130.1 lb.ft - 18 kg.m) at 2500 rpm. The engine power is transmitted to the road by the front wheel drive (FF) with a 5MT gearbox. For stopping power, the Mitsubishi Lancer 2.0DT MX saloon braking system includes Leading trailing drum brake at the rear and Ventilated disk at the front. Stock tire sizes are 175/70 on 13 inch rims 82S at the rear and 175/70 on 13 inch rims 82S at the front. Chassis details - Mitsubishi Lancer 2.0DT MX saloon has multi link rear suspension and McPherson strut front suspension for road holding and ride confort.
Add to compare listGENERAL INFORMATION | |
---|---|
Complectation Name | 2.0DT MX saloon |
Period of Production | Oct 1992 - Dec 1993 |
Drive Wheels - Traction - Drivetrain | FF |
Body Type | Sedan |
Transmission Gearbox - Number of Speeds | 5MT |
Engine Size - Displacement - Engine Capacity | 1998 cm3 or 121.9 cu-in |
Frame Name | X-CB8A |
Price of New Car in Tokyo, Yen | 1547000 |
MITSUBISHI LANCER 2.0DT MX SALOON SIZE, DIMENSIONS AND WEIGHT | |
Exterior Length | 427.5 cm or 168.3 inches |
Exterior Width | 169 cm or 66.53 inches |
Exterior Height | 138.5 cm or 54.52 inches |
Interior Length | 180.5 cm or 71.06 inches |
Interior Width | 141.5 cm or 55.7 inches |
Interior Height | 116 cm or 45.66 inches |
Wheelbase | 250 cm or 98.42 inches |
Front Axle Length | 145 cm or 57.08 inches |
Rear Axle Length | 146 cm or 57.48 inches |
Ride Height - Ground Clearance | 15 cm or 5.9 inches |
Weight | 1060 kg or 2336 lbs |
Num. of Seats | 5 |
Num. of Doors | 4 |
Minimum Turning Circle - Turning Diameter, m | 5.1 |
Fuel Tank Capacity | 13.2 US gallons 10.9 UK gallons 50 L |
MITSUBISHI LANCER 2.0DT MX SALOON ENGINE TECHNICAL DATA | |
Engine Code | 4D68 |
Maximum Power - Output - Horsepower | 89.2 PS or 88 bhp or 65.6 kW |
Maximum Power RPM | 4500 rpm |
Maximum Torque | 176.5 Nm or 130.1 lb.ft or 18 kg.m |
Maximum Torque RPM | 2500 rpm |
Engine Type - Number of Cylinders | water cooling 4 cylinder SOHC8 valve |
Engine Additional Info | Charger |
Fuel Type | Light oil |
Fuel Consumption (60 km/h mode) | 71.2 mpg US 85.6 mpg UK 3.3 L/100km |
1st Gear Ratio | 3.363 |
2nd Gear Ratio | 1.947 |
3rd Gear Ratio | 1.285 |
4th Fear Ratio | 0.939 |
5th Gear Ratio | 0.729 |
Rear Gear Ratio | 3.083 |
Compression Ratio | 22 |
Bore | 8.3 cm or 3.26 inches |
Stroke | 9.3 cm or 3.66 inches |
MITSUBISHI LANCER 2.0DT MX SALOON SUSPENSION | |
Front Brakes - Disc Dimensions | Ventilated disk |
Rear Brakes - DisΡ Dimensions | Leading trailing drum brake |
Front Suspension | McPherson strut |
Rear Suspension | multi link |
Front Tyres - Rims Dimensions | 175/70 R13 82S |
Rear Tyres - Rims Dimensions | 175/70 R13 82S |
Tyres - Rims Dimensions | 175 / 70 R13 82S |
Aluminium Disk | |
MITSUBISHI LANCER 2.0DT MX SALOON EXTERIOR | |
Sunroof | |
Tilt Sunroof | |
Twin Sunroof | |
Front Spoiler | |
Rear Spoiler | |
Power Adjustable Door Mirrors | |
Xenon Lamps | |
Front Fog Lamps | |
Rear Fog Lamps | |
Cornering Lamps | |
Ultraviolet Glass Protection | |
Roof Rail | |
Back Wiper | |
MITSUBISHI LANCER 2.0DT MX SALOON INTERIOR | |
Power Window | |
Power Steering | |
Tachometer | |
Centralized Door Lock | |
Keyless Enter | |
Right Hand Drive | |
Left Hand Drive | |
Leather Winding | |
Adjustable Steering | |
Telescopic Steering | |
Tilt Steering | |
Wood Panel | |
Cruise Control | |
Leather Seat | |
Power Adjustable Seats | |
Power Ajustable Front Seat | |
Power Ajustable Back Seat | |
Reclining Seats | |
Removable Seats | |
Turning Seats | |
MITSUBISHI LANCER 2.0DT MX SALOON SAFETY | |
Drivers Airbag | |
Passengers Airbag | |
Side Airbag | |
Side Impact Bar | |
TCS | |
Break Assist | |
Parking Radar | |
Central Power Window Control | |
Additional Stop Light | |
Safety Belt Pretensioner | |
Safety Belt Limiter | |
3 Point Safety Belt | |
Child Car Restraints | |
Durable Frame | |
AMENITY | |
Cooler | |
Automatic Air Conditioning | |
Twin Conditioning System | |
Air Purifier | |
Radio | |
Autoreverse Casette | |
CD Player | |
CD Changer | |
MD Palyer | |
MD Changer | |
OTHER | |
LSD | |
Front Stabilizer | |
Rear Stablilizer | |
Special Equipment | No |
- Present
- Option
- Not Present (or Dealer Option)
More photos Mitsubishi Lancer
By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on April 19, 2024
π Model Years
π Engine Specifications
π Performance Metrics
π Fuel Efficiency
π Fuel Tank Capacity
π Dimensions and Sizes
π Wheel Details
π Trim Levels
π Generational Changes
π Conclusion
π Frequently Asked Questions (FAQ) About the 1992-Mitsubishi Lancer 2.0DT MX Saloon
Introduction
The "1992-1993 Mitsubishi Lancer 2.0DT MX saloon" emerges as a distinguished sedan within Mitsubishi's lineup during this period. With production spanning from October 1992 to December 1993, this model boasts a 2.0-liter turbocharged diesel engine, setting it apart as a blend of performance and fuel efficiency.Designed for a front-wheel-drive (FF) layout, the 2.0DT MX saloon exhibits a sleek sedan body type that encompasses practicality and style. Its transmission system is equipped with a 5-speed manual gearbox, offering a balanced driving experience.
Under the hood lies a 1998 cmΓΒ³ engine capable of generating a noteworthy output of 89.2 PS (88 bhp) at 4500 rpm. The engine carries the code "4D68" and features a water-cooled 4-cylinder SOHC configuration with 8 valves. Notably, a turbocharger further enhances the power delivery.
The vehicle's dimensions reveal a harmonious balance between exterior and interior space. An exterior length of 427.5 cm (168.3 inches) provides ample room, while a wheelbase of 250 cm (98.42 inches) promises stability. The sedan comfortably accommodates five passengers across four doors.
Precision-engineered suspension, including McPherson strut front and multi-link rear systems, ensures a responsive and composed ride. The Mitsubishi Lancer 2.0DT MX saloon's brake system features ventilated disks at the front and leading trailing drum brakes at the rear, contributing to secure stopping power.
Inside, the vehicle offers standard power windows, power steering, and centralized door locks for convenience. The comprehensive set of safety features includes side impact bars and 3-point safety belts, ensuring occupants' well-being.
Incorporating a variety of features, the 1992-1993 Mitsubishi Lancer 2.0DT MX saloon embodies the brand's commitment to performance, comfort, and safety. Its blend of advanced engineering and thoughtful design makes it a noteworthy choice in the sedan segment during its production span.
Model Years
During the span of 1992 to 1993, Mitsubishi introduced the Lancer 2.0DT MX saloon, a model that encapsulates the brand's dedication to innovation and performance. These two years marked the production cycle of this unique sedan, showcasing Mitsubishi's engineering prowess and commitment to delivering a blend of power and efficiency.The 2.0DT MX saloon stands as a testament to Mitsubishi's focus on crafting vehicles that align with drivers' evolving needs. With a vision for both the present and the future, the brand designed this model to cater to discerning motorists seeking a balance between dynamic performance and fuel economy.
Mitsubishi's decision to release the 2.0DT MX saloon during this specific timeframe demonstrates its responsiveness to market trends and technological advancements. As the automotive landscape evolved, Mitsubishi positioned itself as a frontrunner by offering a sedan that incorporated cutting-edge features and engineering excellence.
Throughout these years, the 1992-1993 Mitsubishi Lancer 2.0DT MX saloon carved a distinctive niche for itself, appealing to drivers who valued not only style but also practicality and innovation. The model's presence on the market during these specific years highlights Mitsubishi's ability to create vehicles that harmonize with the needs and aspirations of their time.
Engine Specifications
At the heart of the 1992-1993 Mitsubishi Lancer 2.0DT MX saloon lies a finely tuned and technologically advanced engine, showcasing the brand's dedication to both performance and efficiency. This 2.0-liter turbocharged diesel powerplant, denoted by the engine code "4D68," delivers a harmonious blend of power and economy.Beneath the hood, the 4D68 engine features a water-cooled 4-cylinder single overhead cam (SOHC) configuration with 8 valves. Its turbocharger enhances the engine's performance, ensuring responsive acceleration and optimal power delivery. With a displacement of 1998 cmΓΒ³, this engine boasts the capacity to generate 89.2 PS (88 bhp) at 4500 rpm, emphasizing its prowess in providing a dynamic driving experience.
The 1992-1993 Mitsubishi Lancer 2.0DT MX saloon's engine showcases a maximum torque of 176.5 Nm (130.1 lb.ft) at 2500 rpm, highlighting its ability to deliver substantial low-end power for both city driving and highway cruising. The well-engineered powertrain is complemented by a 5-speed manual gearbox, enabling drivers to harness the engine's potential with precision.
The engine's design extends beyond performance considerations, encompassing elements of fuel efficiency and durability. The 4D68 engine, fuelled by light oil, reflects Mitsubishi's dedication to creating powerplants that offer a balance between power output and economic operation. With a compression ratio of 22, this engine optimizes fuel combustion for improved efficiency.
The engine's specifications underline Mitsubishi's commitment to creating vehicles that not only excel in power and performance but also prioritize efficiency and longevity. Through meticulous engineering and a focus on technological innovation, the 1992-1993 Mitsubishi Lancer 2.0DT MX saloon's engine stands as a prime example of the brand's dedication to crafting vehicles that meet the demands of discerning drivers.
Performance Metrics
The 1992-1993 Mitsubishi Lancer 2.0DT MX saloon impresses with its noteworthy performance metrics, a result of meticulous engineering and thoughtful design. At the core of its performance lies a turbocharged 2.0-liter diesel engine that exemplifies a harmonious blend of power and efficiency.With an engine code "4D68," this powerplant is finely tuned to generate a peak power output of 89.2 PS (88 bhp) at 4500 rpm, offering spirited acceleration and highway cruising capabilities. The engine's maximum torque of 176.5 Nm (130.1 lb.ft) at 2500 rpm ensures robust low-end torque delivery, making city driving and overtaking maneuvers effortless.
Equipped with a 5-speed manual gearbox, the 1992-1993 Mitsubishi Lancer 2.0DT MX saloon empowers drivers with precise gear control and engagement, enhancing the driving experience. This transmission configuration complements the engine's power characteristics, providing seamless power delivery across various driving scenarios.
Furthermore, the model's chassis and suspension contribute to its dynamic performance. McPherson strut front suspension and multi-link rear suspension ensure responsive handling and a composed ride quality. The brake system, featuring ventilated disks at the front and leading trailing drum brakes at the rear, offers confident stopping power.
As a result of these cohesive elements, the 1992-1993 Mitsubishi Lancer 2.0DT MX saloon excels in providing a driving experience that merges power, control, and efficiency. This balance between performance and practicality underscores Mitsubishi's commitment to creating vehicles that captivate drivers and passengers alike.
Fuel Efficiency
The 1992-1993 Mitsubishi Lancer 2.0DT MX saloon stands as a testament to the brand's commitment to achieving a harmonious balance between performance and fuel efficiency. This sedan demonstrates Mitsubishi's innovative approach in crafting vehicles that cater to both driving enthusiasts and those mindful of their fuel consumption.Powered by a turbocharged 2.0-liter diesel engine, the 2.0DT MX saloon showcases engineering prowess that prioritizes not only power but also economical operation. The engine's design, in conjunction with the model's aerodynamic profile, contributes to an efficient fuel utilization, allowing drivers to journey further with fewer stops at the fuel pump.
Moreover, the 1992-1993 Mitsubishi Lancer 2.0DT MX saloon is equipped with a 5-speed manual gearbox that optimally complements the engine's torque delivery. This transmission system allows drivers to choose gears that suit their driving conditions, promoting efficient acceleration and highway cruising alike.
Mitsubishi's dedication to achieving fuel efficiency is further demonstrated by the model's lightweight construction and meticulous engineering. By integrating innovative technologies and materials, the 2.0DT MX saloon ensures that every drop of fuel is maximized for both power generation and overall driving performance.
With these considerations, the 1992-1993 Mitsubishi Lancer 2.0DT MX saloon emerges as a vehicle that transcends conventional notions of performance, seamlessly merging power, control, and fuel economy. The model serves as a testament to Mitsubishi's commitment to crafting vehicles that address the multifaceted needs of modern drivers.
Fuel Tank Capacity
The 1992-1993 Mitsubishi Lancer 2.0DT MX saloon not only exhibits impressive performance but also reflects the brand's foresight in optimizing its fuel efficiency. A crucial component in achieving this balance is the vehicle's fuel tank capacity, a thoughtful consideration that contributes to the model's practicality and long-distance travel capabilities.The fuel tank of the 2.0DT MX saloon is designed to accommodate a substantial volume of fuel, enabling drivers to cover considerable distances before needing to refuel. This is especially important for individuals who embark on long journeys or frequently commute over extended stretches of road.
The capacity of the fuel tank is strategically aligned with the sedan's efficient engine and transmission system. This synchronization ensures that the vehicle maximizes its fuel consumption potential, extending the range between fuel stops and offering drivers convenience and peace of mind during their travels.
The 1992-1993 Mitsubishi Lancer 2.0DT MX saloon's fuel tank capacity underscores the brand's commitment to creating vehicles that deliver both performance and practicality. By providing drivers with an ample reservoir for fuel, Mitsubishi enhances the model's versatility and suitability for various driving scenarios, making it an ideal choice for those who value efficient and uninterrupted journeys.
Dimensions and Sizes
The 1992-1993 Mitsubishi Lancer 2.0DT MX saloon is meticulously designed with well-proportioned dimensions and sizes, contributing to its balanced appearance and comfortable interior space. This sedan strikes a harmonious balance between exterior presence and interior roominess, reflecting Mitsubishi's commitment to delivering a vehicle that caters to both form and function.The exterior dimensions of the 2.0DT MX saloon encompass a length of 427.5 cm (168.3 inches), a width of 169 cm (66.53 inches), and a height of 138.5 cm (54.52 inches). These dimensions ensure that the sedan presents a substantial and commanding presence on the road while remaining agile enough for urban maneuverability.
Inside the vehicle, passengers are treated to a thoughtfully designed interior space. The interior length measures 180.5 cm (71.06 inches), offering ample legroom for both front and rear occupants. The interior width spans 141.5 cm (55.7 inches), promoting a comfortable and airy cabin ambiance. The interior height of 116 cm (45.66 inches) accommodates passengers of varying heights, enhancing overall comfort.
The sedan's wheelbase measures 250 cm (98.42 inches), which contributes to a stable and well-balanced ride quality. Additionally, the 2.0DT MX saloon provides a minimum turning circle with a turning diameter of 5.1 meters, enhancing its maneuverability in tight spaces.
The 1992-1993 Mitsubishi Lancer 2.0DT MX saloon's dimensions and sizes are a testament to the brand's commitment to delivering a vehicle that harmonizes with the needs of modern drivers. The careful consideration of exterior proportions and interior space ensures that the sedan not only captivates with its appearance but also offers a comfortable and accommodating driving experience for all occupants.
Wheel Details
The wheel details of the 1992-1993 Mitsubishi Lancer 2.0DT MX saloon play a crucial role in both its aesthetics and performance. Designed with precision and engineered to enhance the sedan's overall driving experience, these wheels are a testament to Mitsubishi's dedication to creating vehicles that excel in both form and function.The 2.0DT MX saloon features front and rear tires with the dimensions of 175/70 R13 82S. These tire specifications strike a balance between comfort and performance, ensuring a smooth ride while maintaining optimal grip on various road surfaces. The wheels are well-suited for both city commuting and highway cruising, offering drivers a versatile driving experience.
Moreover, the choice of wheel size and tire dimensions is harmoniously integrated into the sedan's suspension system. The front suspension utilizes McPherson struts, while the rear suspension employs a multi-link setup. This ensures that the wheels work in tandem with the suspension to provide responsive handling and a composed ride quality.
The wheel details of the 1992-1993 Mitsubishi Lancer 2.0DT MX saloon reflect the brand's commitment to delivering a well-rounded driving experience. Mitsubishi's attention to detail is evident in the careful selection of tire dimensions, which contribute to the sedan's dynamic performance and overall comfort. These wheels serve as a testament to the brand's dedication to creating vehicles that excel in both design and functionality.
Trim Levels
The 1992-1993 Mitsubishi Lancer 2.0DT MX saloon offers a distinctive range of trim levels that cater to various preferences and requirements of discerning drivers. Each trim level of this sedan is carefully crafted to provide a unique blend of features, amenities, and styling enhancements, allowing buyers to select the one that best aligns with their individual needs.These trim levels are thoughtfully designed to enhance both the vehicle's aesthetics and its overall functionality. Mitsubishi's dedication to offering a variety of options is evident in the attention to detail that each trim level exhibits. From exterior design elements to interior features, each trim level showcases a combination of convenience, comfort, and style.
The 2.0DT MX saloon's trim levels cater to a diverse range of tastes, ensuring that there is an option for every type of driver. Whether one values performance-oriented enhancements, luxurious appointments, or technological innovations, the available trim levels of the sedan reflect Mitsubishi's commitment to delivering vehicles that align with a variety of lifestyles.
From the base trim to higher-tier variants, the 1992-1993 Mitsubishi Lancer 2.0DT MX saloon's trim levels encapsulate the brand's dedication to crafting vehicles that offer not only performance and efficiency but also a personalized driving experience. Mitsubishi's approach of offering a diverse array of trim levels underscores its commitment to accommodating the unique preferences of drivers and passengers alike.
Generational Changes
The 1992-1993 Mitsubishi Lancer 2.0DT MX saloon marks an important era in the model's lineage, showcasing the brand's commitment to continuous improvement and evolution. While the 2.0DT MX saloon itself remains consistent over these two years, Mitsubishi's dedication to enhancing the overall driving experience is evident through various generational changes and refinements.During this period, the 2.0DT MX saloon benefits from Mitsubishi's ongoing research and development efforts. While the core features and design elements remain intact, the brand takes advantage of technological advancements and feedback from drivers to make subtle adjustments that enhance the vehicle's performance, comfort, and safety features.
Generational changes in the 1992-1993 Mitsubishi Lancer 2.0DT MX saloon might involve improvements in materials and manufacturing techniques, leading to enhanced build quality and durability. Additionally, advancements in technology might influence the integration of new features that further enhance the driving experience, ensuring that the sedan remains competitive and relevant in a rapidly evolving automotive landscape.
It's important to note that while the 2.0DT MX saloon maintains its identity over these years, the generational changes underscore Mitsubishi's dedication to staying at the forefront of automotive innovation. By incorporating incremental improvements that resonate with drivers' expectations, the brand ensures that each iteration of the 2.0DT MX saloon delivers an even more satisfying driving experience than the last.
Conclusion
The 1992-1993 Mitsubishi Lancer 2.0DT MX saloon stands as a testament to the brand's unwavering commitment to delivering vehicles that combine performance, efficiency, and innovation. Across these two years, the model encapsulates Mitsubishi's dedication to creating a sedan that resonates with the diverse needs of modern drivers.Through meticulous engineering, the 2.0DT MX saloon incorporates a turbocharged 2.0-liter diesel engine that marries power and fuel efficiency seamlessly. The engine's performance metrics, dimensions, and wheel details are all thoughtfully designed to offer a driving experience that is both dynamic and comfortable.
The range of trim levels caters to an array of preferences, allowing buyers to choose a version that aligns with their individual tastes. Meanwhile, the sedan's generational changes reflect Mitsubishi's continuous pursuit of improvement, ensuring that each iteration of the 2.0DT MX saloon builds upon the success of its predecessors.
From its inception in 1992 to its final year in 1993, the Mitsubishi Lancer 2.0DT MX saloon leaves an indelible mark as a versatile and well-rounded sedan. It exemplifies the brand's ability to create vehicles that harmonize aesthetics, performance, and practicality, making it a noteworthy choice for drivers seeking a balanced driving experience.
Frequently Asked Questions (FAQ) About the 1992-1993 Mitsubishi Lancer 2.0DT MX Saloon
What is the production period of the 1992-1993 Mitsubishi Lancer 2.0DT MX saloon?
What type of body does the 1992-1993 Mitsubishi Lancer 2.0DT MX saloon have?
What is the engine capacity of the 1992-1993 Mitsubishi Lancer 2.0DT MX saloon?
How many doors does the 1992-1993 Mitsubishi Lancer 2.0DT MX saloon have?
What is the fuel tank capacity of the 1992-1993 Mitsubishi Lancer 2.0DT MX saloon?
What are the dimensions of the 1992-1993 Mitsubishi Lancer 2.0DT MX saloon?
How many trim levels are available for the 1992-1993 Mitsubishi Lancer 2.0DT MX saloon?
What is the maximum power output of the engine in the 1992-1993 Mitsubishi Lancer 2.0DT MX saloon?
How does the suspension system of the 1992-1993 Mitsubishi Lancer 2.0DT MX saloon work?
What safety features are present in the 1992-1993 Mitsubishi Lancer 2.0DT MX saloon?
What are the wheel details of the 1992-1993 Mitsubishi Lancer 2.0DT MX saloon?
How does the fuel efficiency of the 1992-1993 Mitsubishi Lancer 2.0DT MX saloon compare to other vehicles?
Are there any notable generational changes between the years 1992 and 1993 for the Mitsubishi Lancer 2.0DT MX saloon?
What makes the 1992-1993 Mitsubishi Lancer 2.0DT MX saloon a unique choice in its segment?
Brian Wong / AuthorBrian Wong is an accomplished automotive journalist and editor with a passion for cars. With over a decade of experience in the industry, he has established himself as a trusted voice in the automotive community. Brian has written extensively about a wide range of topics in the field, from the latest trends in car design to innovative safety features and emerging technologies. As a senior reviews editor, he is responsible for test driving and analyzing the latest cars on the market, providing readers with accurate and objective reviews. His articles are widely read and respected for their depth of knowledge and analysis. Brian is committed to staying at the forefront of the latest developments in the automotive industry, and is dedicated to sharing his expertise and insights with his readers. |