1990 Mitsubishi Minicab 660 Standard Specs


OVERVIEW

With a fuel consumption of 51.1 mpg US - 61.4 mpg UK - 4.6 L/100km, a weight of 1587 lbs (720 kg), the Mitsubishi Minicab 660 Standard has a water cooling 4 cycle OHC 3 cylinder engine, a Regular gasoline engine 3G83. This engine 3G83 produces a maximum power of 38.5 PS (38 bhp - 28.3 kW) at 5500 rpm and a maximum torque of 51.9 Nm (38.3 lb.ft - 5.3 kg.m) at 4500 rpm. The engine power is transmitted to the road by the four wheel drive (4WD) with a 4MT gearbox. For stopping power, the Mitsubishi Minicab 660 Standard braking system includes Leading trailing drum brake at the rear and Disk at the front. Chassis details - Mitsubishi Minicab 660 Standard has semicircle leaf spring rear suspension and McPherson strut coil spring front suspension for road holding and ride confort.

Add to compare list

GENERAL INFORMATION
Complectation Name660 Standard
Period of ProductionMar 1990 - Dec 1990
Drive Wheels - Traction - Drivetrain4WD
Body TypeCommercial Van
Transmission Gearbox - Number of Speeds4MT
Engine Size - Displacement - Engine Capacity657 cm3 or 40 cu-in
Frame NameM-U19T

MITSUBISHI MINICAB 660 STANDARD SIZE, DIMENSIONS AND WEIGHT
Exterior Length322.5 cm or 126.96 inches
Exterior Width139.5 cm or 54.92 inches
Exterior Height170 cm or 66.92 inches
Wheelbase178 cm or 70.07 inches
Ride Height - Ground Clearance16.5 cm or 6.49 inches
Weight720 kg or 1587 lbs
Num. of Seats2
Num. of Doors2
Minimum Turning Circle - Turning Diameter, m3.8
Fuel Tank Capacity9.5 US gallons
7.9 UK gallons
36 L

MITSUBISHI MINICAB 660 STANDARD ENGINE TECHNICAL DATA
Engine Code3G83
Maximum Power - Output - Horsepower38.5 PS or 38 bhp or 28.3 kW
Maximum Power RPM5500 rpm
Maximum Torque51.9 Nm or 38.3 lb.ft or 5.3 kg.m
Maximum Torque RPM4500 rpm
Engine Type - Number of Cylinderswater cooling 4 cycle OHC 3 cylinder
Fuel TypeRegular gasoline
Fuel Consumption (60 km/h mode)51.1 mpg US
61.4 mpg UK
4.6 L/100km

MITSUBISHI MINICAB 660 STANDARD SUSPENSION
Front Brakes - Disc DimensionsDisk
Rear Brakes - Disс DimensionsLeading trailing drum brake
Front SuspensionMcPherson strut coil spring
Rear Suspensionsemicircle leaf spring
Tyres - Rims Dimensions5.00-12-4PR
Aluminium DiskStandart

MITSUBISHI MINICAB 660 STANDARD EXTERIOR
SunroofNo
Tilt SunroofNo
Twin SunroofNo
Front SpoilerNo
Rear SpoilerNo
Power Adjustable Door MirrorsNo
Xenon LampsNo
Front Fog LampsNo
Rear Fog LampsNo
Cornering LampsNo
Ultraviolet Glass ProtectionNo
Roof RailNo

MITSUBISHI MINICAB 660 STANDARD INTERIOR
Power WindowNo
Power SteeringNo
TachometerNo
Centralized Door LockNo
Keyless EnterNo
Right Hand DriveStandart
Left Hand DriveNo
Leather WindingNo
Adjustable SteeringNo
Wood PanelNo
Cruise ControlNo
Leather SeatNo
Power Adjustable SeatsNo
Reclining SeatsNo
Removable SeatsNo
Turning SeatsNo

MITSUBISHI MINICAB 660 STANDARD SAFETY
Drivers AirbagNo
Passengers AirbagNo
Side AirbagNo
Side Impact BarNo
TCSNo
Break AssistNo
Parking RadarNo
Central Power Window ControlNo
Additional Stop LightNo

AMENITY
CoolerNo
Automatic Air ConditioningNo
Twin Conditioning SystemNo
Air PurifierNo
RadioNo
Autoreverse CasetteNo
CD PlayerNo
CD ChangerNo
MD PalyerNo
MD ChangerNo

OTHER
LSDNo
Front StabilizerNo
Rear StablilizerNo
Special EquipmentNo


- Present
- Option
- Not Present (or Dealer Option)



More photos Mitsubishi Minicab


By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on March 28, 2024
πŸ“Œ Introduction to the 1990 Mitsubishi Minicab 660 Standard
πŸ“Œ Engine Specifications
πŸ“Œ Dimensions and Sizes
πŸ“Œ Fuel Tank Capacity
πŸ“Œ Fuel Consumption
πŸ“Œ Engine Performance
πŸ“Œ Fuel Capacity
πŸ“Œ MPG (Miles Per Gallon)
πŸ“Œ Wheel Details
πŸ“Œ Trim Levels and Variations
πŸ“Œ Generational Changes
πŸ“Œ Production Year Models
πŸ“Œ Conclusion and Summary
πŸ“Œ FAQ: Answers to Common Questions About the Mitsubishi Minicab 660 Standard

Introduction to the 1990 Mitsubishi Minicab 660 Standard

The 1990 Mitsubishi Minicab 660 Standard, a notable entry into the world of kei trucks, stands as a testament to practicality and efficiency. This compact commercial van, produced from March 1990 to December 1990, was engineered to meet the diverse needs of both urban and rural settings.

At its core, the 1990 Minicab 660 Standard featured a robust 657 cm3 engine, identified by the engine code 3G83. This water-cooled, 4-cycle OHC 3-cylinder engine delivered a maximum power output of 38.5 PS (38 bhp) at 5500 rpm and a peak torque of 51.9 Nm at 4500 rpm. Fueled by regular gasoline, it achieved a commendable fuel consumption of 51.1 mpg in the 60 km/h mode.

The Minicab's compact dimensions made it ideally suited for maneuvering through tight city streets and narrow rural lanes. With an exterior length of 322.5 cm, width of 139.5 cm, and height of 170 cm, it presented a compact profile. The wheelbase measured 178 cm, providing stability on various terrains.

This 4WD workhorse boasted a sturdy frame, known as the M-U19T, designed to withstand the demands of commercial use. With a weight of 720 kg, it could carry its load efficiently, making it a reliable companion for various hauling tasks.

Inside the cabin, the Minicab 660 Standard offered a straightforward and functional interior. It accommodated two passengers in its 2-door configuration, keeping the focus on utility and cargo space. Features like power windows and power steering were not included in this basic trim level.

The suspension system included a McPherson strut coil spring at the front and a semicircle leaf spring at the rear, ensuring a comfortable ride even when the van was loaded.

Safety features, such as airbags and advanced braking systems, were not part of this model's specifications. It prioritized utility over luxury, catering to businesses and industries that required a reliable, no-frills workhorse.

The 1990 Mitsubishi Minicab 660 Standard, with its compact size, economical engine, and utilitarian design, offered a practical solution for various commercial and industrial needs during its production period. Its enduring legacy as a reliable workhorse in its class continues to be appreciated by those seeking efficiency and simplicity in their daily operations.

Engine Specifications

The heart of the 1990 Mitsubishi Minicab 660 Standard lies in its engine specifications, showcasing the engineering prowess that made this compact commercial van a reliable workhorse during its production years.

Under the hood, you'd find the 3G83 engine, a 657 cm3 powerplant. This water-cooled, 4-cycle OHC 3-cylinder engine was designed to deliver the kind of performance and efficiency that suits the demands of commercial use.

In terms of power output, the 3G83 engine generated a maximum of 38.5 PS (38 bhp) at 5500 rpm, providing enough muscle to tackle various hauling tasks. Its torque output was equally impressive, with a peak of 51.9 Nm at 4500 rpm, ensuring the Minicab could handle different terrains and loads with ease.

This engine ran on regular gasoline, making it accessible and cost-effective to operate. It achieved an impressive fuel consumption rate, particularly in the 60 km/h mode, where it managed to attain 51.1 mpg US or 61.4 mpg UK (4.6 L/100km). Such fuel efficiency was a significant advantage for businesses relying on this van for daily operations.

The 1990 Minicab 660 Standard's engine, with its balance of power and efficiency, played a pivotal role in establishing its reputation as a practical and dependable choice for commercial use. Its design and performance were tailored to meet the diverse needs of businesses and industries, contributing to its enduring popularity in its class.

Dimensions and Sizes

The 1990 Mitsubishi Minicab 660 Standard was designed with compactness and practicality in mind, making it an ideal choice for navigating tight urban streets and handling various commercial tasks. Its dimensions and sizes played a crucial role in defining its versatility and usability.

With an exterior length of 322.5 cm, this commercial van presented a compact footprint, allowing for easy parking and maneuvering in congested city environments. The width of 139.5 cm further enhanced its agility, ensuring it could navigate narrow lanes and alleyways with ease.

Standing at a height of 170 cm, the Minicab provided ample headroom for passengers and cargo while maintaining a low center of gravity for stability during transport. The wheelbase, measuring 178 cm, contributed to its balance and handling characteristics.

One of the practical features of the Minicab 660 Standard was its minimum turning circle of 3.8 meters, which facilitated sharp turns and U-turns, especially useful in crowded urban settings.

Weighing in at 720 kg, this van was lightweight yet robust, capable of carrying significant loads while remaining fuel-efficient. Its 2-door configuration provided access to a spacious cargo area, making it suitable for a range of commercial applications.

The ground clearance, at 16.5 cm, struck a balance between urban agility and off-road capability, allowing the Minicab to handle different terrains with confidence.

In summary, the 1990 Mitsubishi Minicab 660 Standard's dimensions and sizes were finely tuned to meet the demands of both urban and rural environments. Its compact footprint, low turning circle, and balanced proportions made it a versatile and practical choice for businesses and industries requiring efficient transportation and delivery solutions.

Fuel Tank Capacity

The fuel tank capacity of the 1990 Mitsubishi Minicab 660 Standard was a vital specification that contributed to its practicality and usability as a commercial van. While the specific value is not mentioned, it's important to understand the significance of this attribute.

The fuel tank capacity determines the amount of fuel that the vehicle can carry, which directly affects its range and how often it needs refueling. For commercial vehicles like the Minicab, a reasonable fuel tank capacity was essential to minimize downtime for refueling and optimize operational efficiency.

With a fuel-efficient engine and a compact size, the Minicab likely provided a sufficient fuel tank capacity to cover a respectable distance on a single tank of fuel. This characteristic would have been especially valuable for businesses relying on the van for deliveries or transportation in urban and rural areas.

The combination of an economical engine and an appropriately sized fuel tank made the 1990 Mitsubishi Minicab 660 Standard a practical and cost-effective choice for businesses and industries that needed a reliable and efficient commercial vehicle.

Fuel Consumption

The fuel consumption of the 1990 Mitsubishi Minicab 660 Standard was a notable aspect that contributed to its appeal in the commercial vehicle market. While specific values are not provided, it's important to understand the significance of fuel efficiency for this vehicle.

Kei trucks like the Minicab were designed to be fuel-efficient, given their primary use in urban and suburban environments for tasks such as deliveries and transportation. The compact size and lightweight construction of the Minicab, combined with its engine design, likely resulted in a commendable fuel consumption rate.

This efficiency would have been advantageous for businesses and industries relying on the Minicab for their operations. Lower fuel consumption not only reduced operational costs but also contributed to a smaller environmental footprint.

The 1990 Mitsubishi Minicab 660 Standard's fuel efficiency, though not specified here, was a key selling point. It aligned with the vehicle's core purpose of providing reliable and cost-effective transportation for commercial use, making it a practical choice for businesses with a focus on efficiency and sustainability.

Engine Performance

The engine performance of the 1990 Mitsubishi Minicab 660 Standard was a crucial aspect that defined its usability and reliability as a commercial van. While specific values are not provided, we can explore the key factors that contributed to its engine performance.

Powered by the 3G83 engine, this compact van had an engine designed for efficiency and practicality. With a maximum power output of 38.5 PS and a peak torque of 51.9 Nm, it provided the necessary muscle to navigate various terrains and handle different loads, which was essential for commercial applications.

The engine's power delivery was optimized to meet the demands of city driving, ensuring that it could accelerate smoothly and tackle stop-and-go traffic with ease. The 3-cylinder design contributed to the engine's compactness, allowing for a lightweight yet robust powerplant.

The 1990 Minicab 660 Standard's engine performance was well-suited for its intended purposes, which included urban deliveries, small-scale transportation, and light commercial tasks. Its balance of power and efficiency made it a dependable choice for businesses seeking a reliable workhorse with practical engine performance.

Fuel Capacity

The fuel capacity of the 1990 Mitsubishi Minicab 660 Standard played a pivotal role in determining its operational efficiency and range. While specific capacity values are not mentioned, understanding the significance of fuel capacity is crucial.

Fuel capacity directly impacts how far a vehicle can travel on a single tank of fuel. For a commercial van like the Minicab, having an appropriately sized fuel tank was essential to minimize downtime for refueling and maximize productivity.

With a compact design and likely efficient engine, the Minicab would have aimed to strike a balance between sufficient fuel capacity and the overall weight of the vehicle. This balance was crucial to ensure that the van could carry out its intended tasks effectively without excessive fuel consumption.

Businesses and industries relying on the Minicab for transportation and deliveries would have appreciated a practical fuel capacity that allowed them to cover a respectable distance between refueling stops. It contributed to the van's reputation as a cost-effective and reliable workhorse for commercial use.

MPG (Miles Per Gallon)

The Miles Per Gallon (MPG) rating of the 1990 Mitsubishi Minicab 660 Standard was a key factor contributing to its appeal as a practical and cost-effective commercial van. While specific MPG values are not provided, we can discuss the significance of MPG for this vehicle.

MPG measures the vehicle's fuel efficiency, indicating how many miles it can travel on a single gallon of fuel. In the context of the Minicab, a higher MPG rating would have been a desirable trait, as it directly correlated with reduced fuel costs and increased operational efficiency.

Kei trucks like the Minicab were designed with fuel efficiency in mind, particularly for urban and suburban use. They often featured lightweight construction and efficient engine designs to maximize the distance they could cover on minimal fuel.

A good MPG rating for the Minicab would have made it an attractive choice for businesses and industries looking to minimize operating expenses while maintaining reliable transportation for their needs.

The 1990 Mitsubishi Minicab 660 Standard's MPG rating, though not specified here, would have been a significant selling point, highlighting its suitability for cost-conscious businesses and its ability to contribute to reduced environmental impact through lower fuel consumption.

Wheel Details

The wheel details of the 1990 Mitsubishi Minicab 660 Standard were a fundamental aspect that contributed to its overall performance and handling characteristics. While specific values are not provided, we can explore the general aspects related to the wheels of this compact commercial van.

The Minicab's wheels played a crucial role in ensuring stability, traction, and maneuverability, which are essential attributes for a vehicle used in both urban and rural settings.

The dimensions of the wheels, including their size and width, would have been carefully chosen to align with the vehicle's compact design and intended use. The tire specifications, including the type and tread pattern, would have been selected to provide a balance between grip and efficiency.

Given its focus on practicality and efficiency, the Minicab's wheels were likely designed to provide a comfortable ride while ensuring durability and reliability, even under heavy loads.

Wheel details, such as tire size and type, are critical components that influence a vehicle's performance, especially in terms of handling and ride quality. For a commercial van like the Minicab, these details would have been chosen to optimize its usability in various driving conditions.

Overall, the 1990 Mitsubishi Minicab 660 Standard's wheel details would have been carefully considered to complement its compact design and contribute to its ability to navigate different terrains and handle the demands of commercial use effectively.

Trim Levels and Variations

The 1990 Mitsubishi Minicab 660 Standard was a part of the broader Minicab lineup, which often included various trim levels and variations to cater to a range of customer needs. While specific trim levels and variations are not detailed, it's important to understand the concept of trim levels and how they influence a vehicle's features and capabilities.

Trim levels and variations are an integral part of the automotive industry, allowing manufacturers to offer vehicles with different configurations and features to suit various preferences and requirements.

In the case of the Minicab 660 Standard, there may have been other trim levels or variations available within the same model year. These could have included upgraded models with additional features, improved interior options, or enhanced performance attributes. Conversely, there might have been more basic versions designed for those who prioritized utility and affordability.

The availability of different trim levels and variations allows consumers to choose a model that aligns with their specific needs, whether it's for commercial use, personal transportation, or other purposes. It provides flexibility and options, catering to a diverse range of customers.

While specific details about the trim levels and variations of the 1990 Mitsubishi Minicab 660 Standard are not provided, it's common in the automotive industry to offer different configurations to meet the unique needs of customers, ensuring that there's a model that fits various requirements and budgets.

Generational Changes

Generational changes in vehicles often mark significant updates, improvements, or redesigns that contribute to a model's evolution. While specific generational changes for the 1990 Mitsubishi Minicab 660 Standard are not provided, it's valuable to understand the concept of generational updates in the automotive industry.

Car manufacturers typically release new generations of a model every few years to stay competitive and incorporate advancements in technology, safety, efficiency, and design. These changes may involve both exterior and interior modifications, as well as upgrades to engine performance, features, and safety equipment.

In the case of the Minicab 660 Standard, generational changes might have included updates to its engine to enhance fuel efficiency and reduce emissions, improvements in safety features, or design enhancements to make the vehicle more aerodynamic or visually appealing.

Generational changes also consider feedback from customers and address any issues or limitations present in previous models, making each new generation a refinement of the previous one.

It's important to note that the specifics of generational changes for the 1990 Mitsubishi Minicab 660 Standard would require access to detailed historical records or manufacturer documentation. These records would provide a comprehensive overview of the modifications and updates that occurred during different generations of this vehicle.

In summary, generational changes in automotive models are a common practice in the industry, allowing manufacturers to keep their vehicles competitive and in line with evolving customer preferences, technology, and regulatory standards.

Production Year Models

Production year models of the 1990 Mitsubishi Minicab 660 Standard are a crucial aspect to consider when exploring the history and availability of this compact commercial van. While specific details about production year models are not provided, we can discuss the concept and significance of these models.

In the automotive industry, production year models represent specific versions of a vehicle that are manufactured within a particular year. These models may feature updates, modifications, or improvements over previous years, reflecting advancements in technology, design, safety features, and other aspects.

For the 1990 Minicab 660 Standard, production year models might have included variations aimed at addressing customer feedback and staying competitive in the market. These variations could encompass engine enhancements for better fuel efficiency or improved performance, updated interior features for enhanced comfort and convenience, or changes to exterior styling to keep the vehicle fresh and appealing to buyers.

The availability of different production year models allows consumers to choose a vehicle that aligns with their preferences and needs, taking into account the latest advancements and refinements introduced by the manufacturer.

While specific details about production year models for the 1990 Mitsubishi Minicab 660 Standard are not provided, it's common for automotive manufacturers to release new models each year, incorporating improvements and updates to meet changing market demands and regulatory requirements.

Conclusion and Summary

The 1990 Mitsubishi Minicab 660 Standard, a compact commercial van produced for a limited period from March 1990 to December 1990, offered practicality and efficiency in a small package. While specific values for some parameters are not provided, we can summarize the key features and characteristics of this vehicle based on the information available.

Compact Dimensions: The Minicab 660 Standard featured compact exterior dimensions, making it well-suited for urban and suburban environments. With its modest length, width, and height, it could navigate through narrow streets and tight parking spaces with ease.

Engine Performance: Powered by the 3G83 engine, this van delivered adequate power and torque for its intended commercial purposes. It prioritized efficiency, contributing to cost-effective operation.

Fuel Efficiency: The Minicab was designed with fuel efficiency in mind, offering a favorable Miles Per Gallon (MPG) rating. Its economical fuel consumption made it a practical choice for businesses aiming to reduce operational costs.

Practical Design: Inside, the Minicab provided a straightforward and functional interior, accommodating two passengers and emphasizing utility. It lacked advanced features, focusing on reliability and cargo capacity.

Versatile Use: With its 4WD drivetrain and adaptable suspension, the Minicab was suitable for various terrains and tasks. It was a reliable workhorse for small-scale transportation and deliveries.

Production Year Models: While details about specific production year models are not provided, it's common for manufacturers to introduce updates and refinements in successive model years to enhance performance and features.

In conclusion, the 1990 Mitsubishi Minicab 660 Standard embodied the essence of practicality and efficiency, catering to the needs of businesses and industries that required a compact and dependable commercial van. Its compact dimensions, economical engine, and utilitarian design made it a cost-effective choice for a range of commercial applications.

FAQ: Answers to Common Questions About the 1990 Mitsubishi Minicab 660 Standard

What is the production year range for the 1990 Mitsubishi Minicab 660 Standard?

The 1990 Mitsubishi Minicab 660 Standard was produced from March 1990 to December 1990.

How many generations were there for the 1990 Mitsubishi Minicab 660 Standard?

The 1990 Mitsubishi Minicab 660 Standard is part of a specific generation, but it's important to note that generational changes can vary by model and manufacturer.

What are the available engine types for the 1990 Mitsubishi Minicab 660 Standard?

The 1990 Mitsubishi Minicab 660 Standard was typically equipped with a 657 cm3 3G83 engine. However, variations may exist depending on the market and specific trim levels.

Are there different trim levels or models available for the 1990 Mitsubishi Minicab 660 Standard?

While the 1990 Minicab 660 Standard is a specific model, there might have been variations or trim levels within the same model year offering different features or capabilities.

What are the key specifications for the 1990 Mitsubishi Minicab 660 Standard?

The 1990 Mitsubishi Minicab 660 Standard had compact dimensions, a 657 cm3 engine, 4WD drivetrain, and features suitable for commercial use.

How does the fuel consumption of the 1990 Mitsubishi Minicab 660 Standard compare to other vehicles in its class?

The fuel consumption of the Minicab 660 Standard is generally better than larger commercial vehicles, thanks to its smaller size and efficient engine. However, specific comparisons would require data on other vehicles in its class.

Were there any safety features in the 1990 Mitsubishi Minicab 660 Standard?

The 1990 Minicab 660 Standard may have had basic safety features for its time, but it's essential to consider that safety standards have evolved significantly since then.

Can you tell me more about the historical significance of the 1990 Mitsubishi Minicab 660 Standard?

The 1990 Minicab 660 Standard holds historical importance as a representation of kei trucks, which played a crucial role in addressing post-war economic challenges and urban mobility needs in Japan and beyond.

What were the common uses of the 1990 Mitsubishi Minicab 660 Standard?

The Minicab 660 Standard was often used for small-scale transportation, deliveries, and various commercial tasks due to its compact size and efficient operation.

How did the 1990 Mitsubishi Minicab 660 Standard influence future vehicle designs?

While specific influences may vary, the Minicab's focus on compactness, fuel efficiency, and utilitarian design aligns with trends toward sustainable and practical transportation solutions in modern times.


Brian Wong - Senior Reviews Editor of cars-directory.net

Brian Wong / Author

Brian Wong is an accomplished automotive journalist and editor with a passion for cars. With over a decade of experience in the industry, he has established himself as a trusted voice in the automotive community. Brian has written extensively about a wide range of topics in the field, from the latest trends in car design to innovative safety features and emerging technologies. As a senior reviews editor, he is responsible for test driving and analyzing the latest cars on the market, providing readers with accurate and objective reviews. His articles are widely read and respected for their depth of knowledge and analysis. Brian is committed to staying at the forefront of the latest developments in the automotive industry, and is dedicated to sharing his expertise and insights with his readers.

Add Comment

 * - The field should be filled
* Your Name:
 Contact (e-mail, phone...):
* Comments:
Photos: