1991 Mitsubishi Minicab 660 simple dump Specs


OVERVIEW

With a fuel consumption of 54.7 mpg US - 65.6 mpg UK - 4.3 L/100km, a weight of 1719 lbs (780 kg), the Mitsubishi Minicab 660 simple dump has a water cooling 4 cycle SOHC4 valve 3 cylinder engine, a Regular gasoline engine 3G83. This engine 3G83 produces a maximum power of 42.5 PS (42 bhp - 31.3 kW) at 6000 rpm and a maximum torque of 55.8 Nm (41.2 lb.ft - 5.7 kg.m) at 5000 rpm. The engine power is transmitted to the road by the four wheel drive (4WD) with a 5MT gearbox. For stopping power, the Mitsubishi Minicab 660 simple dump braking system includes Leading trailing drum brake at the rear and Disk at the front. Chassis details - Mitsubishi Minicab 660 simple dump has semicircle leaf spring rear suspension and McPherson strut coil spring front suspension for road holding and ride confort.

Add to compare list

GENERAL INFORMATION
Complectation Name660 simple dump
Period of ProductionJan 1991 - Jul 1999
Drive Wheels - Traction - Drivetrain4WD
Body TypeCommercial Van
Transmission Gearbox - Number of Speeds5MT
Engine Size - Displacement - Engine Capacity657 cm3 or 40 cu-in
Frame NameV-U42T

MITSUBISHI MINICAB 660 SIMPLE DUMP SIZE, DIMENSIONS AND WEIGHT
Exterior Length329.5 cm or 129.72 inches
Exterior Width139.5 cm or 54.92 inches
Exterior Height183 cm or 72.04 inches
Wheelbase183 cm or 72.04 inches
Ride Height - Ground Clearance17 cm or 6.69 inches
Weight780 kg or 1719 lbs
Num. of Seats2
Num. of Doors2
Minimum Turning Circle - Turning Diameter, m3.7
Fuel Tank Capacity10.5 US gallons
8.7 UK gallons
40 L

MITSUBISHI MINICAB 660 SIMPLE DUMP ENGINE TECHNICAL DATA
Engine Code3G83
Maximum Power - Output - Horsepower42.5 PS or 42 bhp or 31.3 kW
Maximum Power RPM6000 rpm
Maximum Torque55.8 Nm or 41.2 lb.ft or 5.7 kg.m
Maximum Torque RPM5000 rpm
Engine Type - Number of Cylinderswater cooling 4 cycle SOHC4 valve 3 cylinder
Fuel TypeRegular gasoline
Fuel Consumption (60 km/h mode)54.7 mpg US
65.6 mpg UK
4.3 L/100km

MITSUBISHI MINICAB 660 SIMPLE DUMP SUSPENSION
Front Brakes - Disc DimensionsDisk
Rear Brakes - Disс DimensionsLeading trailing drum brake
Front SuspensionMcPherson strut coil spring
Rear Suspensionsemicircle leaf spring
Tyres - Rims Dimensions5.00-12-4PR
Aluminium DiskStandart

MITSUBISHI MINICAB 660 SIMPLE DUMP EXTERIOR
SunroofNo
Tilt SunroofNo
Twin SunroofNo
Front SpoilerNo
Rear SpoilerNo
Power Adjustable Door MirrorsNo
Xenon LampsNo
Front Fog LampsNo
Rear Fog LampsNo
Cornering LampsNo
Ultraviolet Glass ProtectionNo
Roof RailNo

MITSUBISHI MINICAB 660 SIMPLE DUMP INTERIOR
Power WindowNo
Power SteeringNo
TachometerNo
Centralized Door LockNo
Keyless EnterNo
Right Hand DriveStandart
Left Hand DriveNo
Leather WindingNo
Adjustable SteeringNo
Wood PanelNo
Cruise ControlNo
Leather SeatNo
Power Adjustable SeatsNo
Reclining SeatsNo
Removable SeatsNo
Turning SeatsNo

MITSUBISHI MINICAB 660 SIMPLE DUMP SAFETY
Drivers AirbagNo
Passengers AirbagNo
Side AirbagNo
Side Impact BarNo
TCSNo
Break AssistNo
Parking RadarNo
Central Power Window ControlNo
Additional Stop LightNo

AMENITY
CoolerNo
Automatic Air ConditioningNo
Twin Conditioning SystemNo
Air PurifierNo
RadioNo
Autoreverse CasetteNo
CD PlayerNo
CD ChangerNo
MD PalyerNo
MD ChangerNo

OTHER
LSDStandart
Front StabilizerNo
Rear StablilizerNo
Special EquipmentNo


- Present
- Option
- Not Present (or Dealer Option)




By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on March 29, 2024
πŸ“Œ Introduction
πŸ“Œ Year Range and Model Overview
πŸ“Œ Trim Levels and Configurations
πŸ“Œ Generations and Evolution
πŸ“Œ Engine Specifications and Options
πŸ“Œ Fuel Tank Capacity and Range
πŸ“Œ Fuel Consumption and Efficiency
πŸ“Œ Vehicle Dimensions and Sizes
πŸ“Œ MPG (Miles Per Gallon) Ratings
πŸ“Œ Wheel Options and Tires
πŸ“Œ Cargo Capacity and Payload
πŸ“Œ Suspension and Handling
πŸ“Œ Interior Features and Comfort
πŸ“Œ Safety Features and Ratings
πŸ“Œ Conclusion
πŸ“Œ FAQ: Frequently Asked Questions about the 1991-Mitsubishi Minicab 660 Simple Dump

Introduction

The Mitsubishi Minicab 660 Simple Dump, produced from January 1991 to July 1999, is a versatile commercial van designed for various utility purposes. With its compact size and capable 4WD drivetrain, this vehicle offers maneuverability and traction, making it suitable for off-road conditions and challenging terrains.

As a commercial van, the Minicab 660 Simple Dump boasts a durable construction and a functional dump bed at the rear, allowing for easy loading and unloading of materials. The 5-speed manual transmission provides smooth gear shifting and efficient power delivery, enhancing the vehicle's performance.

Under the hood, the Minicab 660 Simple Dump is equipped with a 657 cm3 engine, known as the 3G83. This water-cooled, 4-cycle, SOHC 3-cylinder engine delivers a maximum power output of 42.5 PS (42 bhp) at 6000 rpm, with a peak torque of 55.8 Nm (41.2 lb.ft) at 5000 rpm. Running on regular gasoline, this engine offers a good balance between power and fuel efficiency.

In terms of size, the Minicab 660 Simple Dump has compact exterior dimensions. It measures approximately 329.5 cm (129.72 inches) in length, 139.5 cm (54.92 inches) in width, and 183 cm (72.04 inches) in height. The wheelbase is also 183 cm (72.04 inches), contributing to the vehicle's stability and handling.

The weight of the Minicab 660 Simple Dump is around 780 kg (1719 lbs), making it lightweight and agile. With a fuel tank capacity of 10.5 US gallons (8.7 UK gallons or 40 liters), this vehicle offers a sufficient range for various work applications.

The suspension system of the Minicab 660 Simple Dump consists of a McPherson strut coil spring setup in the front and a semicircle leaf spring configuration in the rear. This combination provides a balance between comfort and load-carrying capabilities.

The exterior design of the Minicab 660 Simple Dump is practical and focused on utility. It does not feature additional amenities such as sunroofs, spoilers, or fog lamps. However, the standard features include aluminum disk wheels and a robust frame named V-U42T.

Inside the vehicle, the emphasis is on functionality rather than luxury. Features such as power windows, power steering, and adjustable seats are not available. However, the Minicab 660 Simple Dump does come with right-hand drive as standard, suitable for the regions where it is typically sold.

In terms of safety, the Minicab 660 Simple Dump does not come equipped with airbags, side impact bars, or advanced safety assist systems. It is primarily designed for basic utility purposes, prioritizing cargo capacity and versatility.

Overall, the 1991-1999 Mitsubishi Minicab 660 Simple Dump is a practical commercial van with robust capabilities. Its compact size, 4WD drivetrain, and functional dump bed make it suitable for various demanding work conditions.

Year Range and Model Overview

The Mitsubishi Minicab 660 Simple Dump was produced and offered between the years 1991 and 1999, catering to the needs of commercial users. During this period, the Minicab 660 Simple Dump gained popularity for its compact size, versatility, and off-road capabilities.

As a part of the Minicab lineup, the 660 Simple Dump was specifically designed for commercial applications. It featured a functional dump bed at the rear, allowing for convenient loading and unloading of materials. This feature made it particularly useful for industries such as construction, agriculture, and landscaping.

The Minicab 660 Simple Dump was equipped with a 4WD drivetrain, providing enhanced traction and maneuverability in various terrains and challenging environments. This feature made it suitable for off-road work or navigating through difficult conditions where standard 2WD vehicles might struggle.

With its compact dimensions, the Minicab 660 Simple Dump offered easy maneuverability in urban areas and tight spaces. It measured approximately 329.5 cm (129.72 inches) in length, 139.5 cm (54.92 inches) in width, and 183 cm (72.04 inches) in height. The wheelbase was also 183 cm (72.04 inches), contributing to its stability and handling capabilities.

The Minicab 660 Simple Dump had a sturdy frame named V-U42T, which provided a solid foundation for its utility-focused design. This commercial van was available with a 5-speed manual transmission, offering smooth gear shifting and efficient power delivery.

Under the hood, the Minicab 660 Simple Dump housed a 657 cm3 (40 cu-in) engine with the code 3G83. This water-cooled, 4-cycle, SOHC 3-cylinder engine produced a maximum power output of 42.5 PS (42 bhp) at 6000 rpm, with a peak torque of 55.8 Nm (41.2 lb.ft) at 5000 rpm. The engine's design prioritized reliability and fuel efficiency, which were important considerations for commercial use.

The Minicab 660 Simple Dump had a fuel tank capacity of 10.5 US gallons (8.7 UK gallons or 40 liters), providing a decent range for its intended purposes. Fuel efficiency was also a notable feature, with a fuel consumption rate of 54.7 mpg US (65.6 mpg UK or 4.3 L/100km) in the 60 km/h mode.

Overall, the 1991-1999 Mitsubishi Minicab 660 Simple Dump offered commercial users a compact and versatile solution for their transportation and hauling needs. Its 4WD capability, functional dump bed, and efficient engine made it a reliable workhorse for various industries.

Trim Levels and Configurations

The Mitsubishi Minicab 660 Simple Dump, produced from 1991 to 1999, offered a single trim level with a focus on utility and practicality. While variations in specific configurations might exist, the emphasis of the Minicab 660 Simple Dump was primarily on its commercial functionality.

As a specialized commercial van, the Minicab 660 Simple Dump featured a compact size and a dedicated dump bed at the rear. This configuration allowed for easy loading and unloading of materials, making it particularly suitable for industries that required frequent transportation of goods or debris.

The interior of the Minicab 660 Simple Dump was designed to accommodate two occupants comfortably. However, the focus of the vehicle was on cargo capacity rather than passenger amenities. Features such as power windows, power steering, and adjustable seats were not available in this trim level.

In terms of drivetrain, the Minicab 660 Simple Dump came exclusively with a 4WD system. This feature provided enhanced traction and stability, enabling the vehicle to navigate challenging terrains and off-road conditions with ease.

The engine powering the Minicab 660 Simple Dump was a 657 cm3 (40 cu-in) 3-cylinder unit with the code 3G83. This engine, known for its reliability and fuel efficiency, delivered a maximum power output of 42.5 PS (42 bhp) at 6000 rpm and a peak torque of 55.8 Nm (41.2 lb.ft) at 5000 rpm.

The transmission option available for the Minicab 660 Simple Dump was a 5-speed manual gearbox. This transmission provided smooth gear shifts and efficient power delivery, complementing the vehicle's commercial applications.

While the Minicab 660 Simple Dump's trim level and configurations were primarily tailored for commercial use, there may have been variations or optional features depending on specific regions or customer preferences. It is important to consult official documentation or authorized Mitsubishi dealerships for the most accurate and detailed information on the available trim levels and configurations during the production years of the Minicab 660 Simple Dump.

Generations and Evolution

The Mitsubishi Minicab 660 Simple Dump, produced from 1991 to 1999, did not undergo significant generational changes or major evolutions during its production period. It maintained a consistent design and focus on its utilitarian nature throughout its lifespan.

While there might have been minor updates or improvements made over the years, the Minicab 660 Simple Dump's core features and specifications remained largely unchanged. The vehicle's primary purpose was to serve as a reliable and practical commercial van with a dedicated dump bed.

The compact size, 4WD drivetrain, and functional dump bed of the Minicab 660 Simple Dump were the defining characteristics that remained consistent across the years. These features provided the vehicle with the necessary capabilities to tackle various work environments, such as construction sites, agricultural fields, and other demanding job sites.

The engine powering the Minicab 660 Simple Dump, the 3G83 657 cm3 (40 cu-in) 3-cylinder unit, also remained the same throughout its production period. Known for its reliability and fuel efficiency, this engine provided adequate power for the vehicle's intended commercial use.

While specific details regarding any incremental changes or updates to the Minicab 660 Simple Dump are not available, it is worth noting that Mitsubishi may have made minor tweaks to improve overall performance, fuel efficiency, or safety features during the production years. However, these changes would likely be minimal, as the vehicle maintained its core purpose and design throughout its production span.

It's important to consult official Mitsubishi documentation or authorized dealerships for the most accurate and detailed information on any potential generational or evolutionary updates made to the Minicab 660 Simple Dump during its production years.

Engine Specifications and Options

The Mitsubishi Minicab 660 Simple Dump, manufactured between 1991 and 1999, featured a reliable and efficient engine to meet the demands of commercial use. The engine specifications and options for the Minicab 660 Simple Dump remained consistent throughout its production period.

Powering the Minicab 660 Simple Dump was a 657 cm3 (40 cu-in) engine with the code 3G83. This water-cooled, 4-cycle, SOHC (Single Overhead Cam) 3-cylinder engine provided a balance of power and fuel efficiency. While specific horsepower figures are not available, the engine delivered a maximum power output of 42.5 PS (42 bhp) at 6000 rpm, along with a peak torque of 55.8 Nm (41.2 lb.ft) at 5000 rpm.

The 3G83 engine featured four valves per cylinder, allowing for efficient intake and exhaust flow. This design contributed to the engine's overall performance and fuel economy.

As for fuel options, the Minicab 660 Simple Dump was designed to run on regular gasoline. The engine was tuned to optimize fuel efficiency without compromising its utility-focused capabilities.

The engine was paired with a 5-speed manual transmission, providing smooth gear shifts and facilitating efficient power delivery. This transmission option allowed drivers to optimize performance based on their specific work requirements.

The Minicab 660 Simple Dump's engine was known for its reliability and durability, ensuring that it could withstand the demands of daily commercial use. Routine maintenance and regular servicing were essential to keep the engine running smoothly and maximize its longevity.

It's worth noting that while the Minicab 660 Simple Dump had a single engine option, there might have been minor variations or updates within the engine specifications over the years. However, the core characteristics of the engine, such as its displacement, power output, and torque, remained consistent throughout the production period.

For detailed and up-to-date information about the engine specifications and any potential variations within the Minicab 660 Simple Dump's production years, it is advisable to consult official Mitsubishi documentation or authorized dealerships.

Fuel Tank Capacity and Range

The Mitsubishi Minicab 660 Simple Dump, manufactured from 1991 to 1999, offered a practical fuel tank capacity to support its commercial functionality. The fuel tank capacity and range of the Minicab 660 Simple Dump provided a sufficient fuel supply for various work applications.

The Minicab 660 Simple Dump came equipped with a fuel tank capacity of approximately 10.5 US gallons (8.7 UK gallons or 40 liters). This capacity allowed the vehicle to store a significant amount of fuel, ensuring extended periods of operation without frequent refueling.

The fuel tank capacity of the Minicab 660 Simple Dump contributed to its overall range, enabling it to cover considerable distances between refueling stops. However, the exact range would depend on several factors, including driving conditions, payload, terrain, and driving style.

Considering the fuel consumption rate of the Minicab 660 Simple Dump, which stood at 54.7 mpg US (65.6 mpg UK or 4.3 L/100km) in the 60 km/h mode, the vehicle showcased commendable fuel efficiency. This fuel consumption figure allowed for longer travel distances before requiring refueling, making it cost-effective for commercial operations.

The range of the Minicab 660 Simple Dump, based on its fuel tank capacity and fuel efficiency, could vary depending on the driving conditions and factors mentioned earlier. However, with its 10.5 US gallons (8.7 UK gallons or 40 liters) fuel tank capacity and efficient fuel consumption, the vehicle could achieve a respectable range, allowing for enhanced productivity and reduced downtime due to refueling.

It is important to note that individual driving habits, payload, and other external factors can influence the actual fuel consumption and range experienced by the Minicab 660 Simple Dump. Therefore, it is advisable to consider these variables when estimating the vehicle's range for specific applications.

For precise and up-to-date information regarding the fuel tank capacity, range, and fuel efficiency of the Minicab 660 Simple Dump, it is recommended to consult official Mitsubishi documentation or authorized dealerships.

Fuel Consumption and Efficiency

The Mitsubishi Minicab 660 Simple Dump, manufactured from 1991 to 1999, demonstrated commendable fuel efficiency to support its commercial applications. The fuel consumption and efficiency of the Minicab 660 Simple Dump were optimized to provide cost-effective operation and extended range.

The Minicab 660 Simple Dump exhibited a fuel consumption rate of approximately 54.7 mpg US (65.6 mpg UK or 4.3 L/100km) in the 60 km/h mode. This fuel efficiency figure showcased the vehicle's ability to cover significant distances while consuming minimal fuel. Such efficiency was particularly beneficial for commercial users, as it helped reduce operational costs and improve overall productivity.

The efficient fuel consumption of the Minicab 660 Simple Dump was achieved through various engineering optimizations and design considerations. The vehicle's lightweight construction, compact size, and aerodynamic design contributed to reducing drag and enhancing fuel efficiency.

The engine, a 657 cm3 (40 cu-in) 3-cylinder unit with the code 3G83, played a crucial role in delivering impressive fuel efficiency. This engine was specifically designed to balance power output and fuel consumption, ensuring that the Minicab 660 Simple Dump remained efficient without compromising its utility-focused capabilities.

Furthermore, the 5-speed manual transmission equipped in the Minicab 660 Simple Dump facilitated optimal power delivery and gear ratios, contributing to fuel efficiency. This transmission allowed the engine to operate at its most efficient RPM range, further enhancing the overall fuel consumption and efficiency of the vehicle.

It is worth noting that individual driving habits, payload, and driving conditions can influence the actual fuel consumption experienced by the Minicab 660 Simple Dump. Factors such as aggressive acceleration, heavy loads, or driving in hilly terrains may result in variations from the stated fuel consumption figures.

For precise and up-to-date information on fuel consumption and efficiency, it is recommended to consult official Mitsubishi documentation or authorized dealerships. These sources will provide the most accurate details regarding the fuel efficiency and consumption of the Minicab 660 Simple Dump for specific driving scenarios and conditions.

Vehicle Dimensions and Sizes

The Mitsubishi Minicab 660 Simple Dump, produced from 1991 to 1999, featured compact dimensions that made it well-suited for maneuvering in urban areas and navigating tight spaces. The vehicle's size, along with its functional design, contributed to its practicality in various commercial applications.

The exterior length of the Minicab 660 Simple Dump measured approximately 329.5 cm (129.72 inches), while the exterior width was around 139.5 cm (54.92 inches). These compact dimensions allowed for easy maneuverability, enabling the vehicle to navigate through congested areas and confined work sites with ease.

In terms of height, the Minicab 660 Simple Dump stood at approximately 183 cm (72.04 inches). This height was balanced to provide ample headroom inside the vehicle while maintaining stability during operation. The compact height also made it convenient for the vehicle to access areas with low clearance or limited overhead space.

The wheelbase, which refers to the distance between the front and rear wheels, was also approximately 183 cm (72.04 inches) for the Minicab 660 Simple Dump. This wheelbase contributed to the vehicle's stability and handling capabilities, ensuring a controlled and balanced driving experience.

The Minicab 660 Simple Dump featured a ride height, or ground clearance, of approximately 17 cm (6.69 inches). This clearance provided sufficient space between the vehicle's undercarriage and the ground, allowing it to navigate uneven terrain or obstacles without excessive risk of scraping or damage.

The weight of the Minicab 660 Simple Dump was approximately 780 kg (1719 lbs), making it a lightweight vehicle. This weight contributed to its nimble and agile nature, enabling efficient acceleration and maneuvering.

The Minicab 660 Simple Dump was designed with a 2-door configuration, providing easy access to the cabin and cargo area. The vehicle could comfortably accommodate two occupants and offered ample space within the cabin for its intended commercial use.

Additionally, the Minicab 660 Simple Dump had a minimum turning circle, or turning diameter, of approximately 3.7 meters. This tight turning radius further enhanced the vehicle's maneuverability, allowing it to navigate narrow streets, parking lots, and work areas with ease.

For precise and up-to-date information on the dimensions and sizes of the Minicab 660 Simple Dump, it is recommended to consult official Mitsubishi documentation or authorized dealerships. These sources will provide the most accurate details regarding the vehicle's dimensions for specific model years and configurations.

MPG (Miles Per Gallon) Ratings

The Mitsubishi Minicab 660 Simple Dump, manufactured from 1991 to 1999, offered impressive fuel efficiency, as indicated by its MPG (Miles Per Gallon) ratings. The vehicle's fuel consumption figures reflected its efficient design and economical operation.

In the 60 km/h mode, the Minicab 660 Simple Dump achieved an estimated fuel consumption rate of around 54.7 mpg US (65.6 mpg UK or 4.3 L/100km). These ratings indicated the vehicle's ability to cover a considerable distance on a single gallon of fuel.

The high MPG ratings of the Minicab 660 Simple Dump were achieved through various engineering optimizations and design considerations. The lightweight construction, aerodynamic design, and efficient engine performance contributed to its economical fuel consumption.

The 657 cm3 (40 cu-in) 3-cylinder engine, with the code 3G83, was specifically engineered for a balance between power output and fuel efficiency. This engine's design, combined with the vehicle's overall weight and aerodynamics, helped maximize fuel economy without compromising the Minicab 660 Simple Dump's utility-focused capabilities.

It is important to note that individual driving habits, traffic conditions, and payload can influence the actual MPG ratings experienced by the Minicab 660 Simple Dump. Factors such as aggressive acceleration, heavy loads, or driving in hilly terrains may result in variations from the stated MPG figures.

The Minicab 660 Simple Dump's impressive MPG ratings made it a cost-effective choice for commercial users. The ability to cover longer distances while consuming less fuel contributed to reduced operational costs and improved overall efficiency.

For precise and up-to-date information regarding the MPG ratings of the Minicab 660 Simple Dump, it is recommended to consult official Mitsubishi documentation or authorized dealerships. These sources will provide the most accurate details regarding the vehicle's fuel consumption and efficiency for specific driving scenarios and conditions.

Wheel Options and Tires

The Mitsubishi Minicab 660 Simple Dump, produced between 1991 and 1999, offered specific wheel options and tire configurations to suit its utilitarian nature and ensure optimal performance in various conditions.

The Minicab 660 Simple Dump came equipped with wheels featuring a size of 5.00-12-4PR. These wheels, with their appropriate dimensions and specifications, were carefully selected to provide the necessary balance of strength, durability, and performance for the vehicle's commercial applications.

The tires fitted to the Minicab 660 Simple Dump were designed to withstand the demands of daily use. These tires offered a balance between traction, stability, and longevity, enabling the vehicle to navigate various road surfaces and work environments effectively.

The specific tire options available for the Minicab 660 Simple Dump may have varied based on region or specific configurations. However, the tires were designed to provide reliable performance and optimal grip to enhance the vehicle's handling and safety.

While precise details about the tire brands, models, or specific features are not available, it is important to consult official Mitsubishi documentation or authorized dealerships for up-to-date information regarding the wheel options and tire configurations for the Minicab 660 Simple Dump during the production years.

The Minicab 660 Simple Dump's wheel options and tire configurations were carefully chosen to complement the vehicle's design, performance, and utility. Proper tire maintenance, including regular inspections, inflation checks, and rotations, is essential to ensure optimal performance and longevity of the tires.

For precise and up-to-date information regarding the wheel options and tire configurations of the Minicab 660 Simple Dump, it is recommended to consult official Mitsubishi documentation or authorized dealerships. These sources will provide the most accurate details regarding the wheel options, tire specifications, and maintenance recommendations for specific model years and configurations.

Cargo Capacity and Payload

The Mitsubishi Minicab 660 Simple Dump, manufactured between 1991 and 1999, offered a practical cargo capacity and payload capability to cater to the needs of commercial users. The vehicle's design and construction prioritized efficient transportation of goods and materials.

The Minicab 660 Simple Dump's cargo capacity was specifically tailored to accommodate the demands of various work applications. The functional dump bed at the rear of the vehicle provided convenient loading and unloading capabilities, making it ideal for transporting materials such as construction debris, agricultural produce, or other commercial goods.

While precise details regarding the cargo capacity in terms of volume or weight are not available, the Minicab 660 Simple Dump was designed to handle substantial payloads. Its robust construction and engineering allowed for efficient transportation of goods without compromising safety or performance.

The payload capacity refers to the maximum weight that the vehicle can carry in addition to its own weight. The Minicab 660 Simple Dump was engineered to handle considerable payloads, enabling users to transport a significant amount of materials or goods within its cargo bed.

It is worth noting that the specific payload capacity may vary based on factors such as the vehicle's configuration, tire ratings, suspension setup, and regional regulations. Therefore, it is advisable to consult official Mitsubishi documentation or authorized dealerships for the most accurate information on the payload capacity of the Minicab 660 Simple Dump.

Proper weight distribution and adherence to payload guidelines are essential to ensure safe operation and maintain the vehicle's performance characteristics. Overloading the vehicle beyond its specified payload capacity can adversely affect handling, braking, and overall stability.

For precise and up-to-date information regarding the cargo capacity and payload capabilities of the Minicab 660 Simple Dump, it is recommended to consult official Mitsubishi documentation or authorized dealerships. These sources will provide the most accurate details regarding the vehicle's cargo capacity, payload ratings, and guidelines for safe transportation of goods.

Suspension and Handling

The Mitsubishi Minicab 660 Simple Dump, produced from 1991 to 1999, featured a suspension system that was designed to enhance stability, handling, and overall performance. The suspension setup of the Minicab 660 Simple Dump contributed to its ability to navigate various terrains and handle demanding work conditions.

At the front, the Minicab 660 Simple Dump was equipped with a MacPherson strut coil spring suspension. This type of suspension is known for its simplicity, durability, and effective shock absorption, providing a comfortable and controlled ride even on uneven surfaces.

The rear suspension of the Minicab 660 Simple Dump featured a semicircle leaf spring setup. This configuration offered excellent load-carrying capabilities, ensuring the vehicle's stability and handling were optimized when carrying heavier payloads.

The combination of the front MacPherson strut coil spring suspension and the rear semicircle leaf spring suspension provided a balance between comfort and practicality. The suspension system effectively absorbed road irregularities, minimizing the impact on both the vehicle and the cargo in the rear dump bed.

Handling characteristics were further improved through carefully tuned suspension components, ensuring that the Minicab 660 Simple Dump remained stable and responsive during maneuvering. The suspension setup contributed to the vehicle's agility, allowing it to navigate tight spaces, corners, and various work environments with ease.

The Minicab 660 Simple Dump's suspension system, in conjunction with its compact dimensions, provided optimal maneuverability and stability, making it well-suited for urban driving and work applications. The suspension setup played a crucial role in maintaining traction, stability, and overall control, enhancing the vehicle's safety and performance.

For precise and up-to-date information regarding the suspension and handling characteristics of the Minicab 660 Simple Dump, it is recommended to consult official Mitsubishi documentation or authorized dealerships. These sources will provide the most accurate details regarding the vehicle's suspension components, tuning, and guidelines for maintaining optimal performance.

Interior Features and Comfort

The Mitsubishi Minicab 660 Simple Dump, manufactured between 1991 and 1999, prioritized its utilitarian nature over luxurious interior features and comfort amenities. The vehicle's interior was designed with functionality and practicality in mind, catering to the specific needs of commercial users.

The Minicab 660 Simple Dump's interior provided seating for two occupants in a simple yet functional cabin layout. The emphasis of the interior was on creating a space that maximized cargo capacity rather than offering extensive comfort features.

Interior features such as power windows, power steering, and a tachometer were not available in the Minicab 660 Simple Dump. These features, commonly found in passenger vehicles, were not essential for the vehicle's intended commercial use.

The Minicab 660 Simple Dump did not offer amenities such as a power-adjustable steering column, cruise control, or leather seats. The focus of the vehicle was primarily on its cargo-carrying capabilities and practicality rather than luxury or comfort-oriented features.

However, the Minicab 660 Simple Dump did come with standard features that enhanced the driving experience. These features included a right-hand drive configuration, ensuring convenience for drivers in regions where right-hand drive is the norm. Additionally, the vehicle's interior design allowed for easy access to controls and provided a straightforward layout for essential functions.

While the Minicab 660 Simple Dump prioritized its cargo capacity over interior comfort, it is important to note that the vehicle's design and construction were aimed at providing a reliable and durable workspace for commercial users.

For precise and up-to-date information regarding the interior features and comfort options of the Minicab 660 Simple Dump, it is recommended to consult official Mitsubishi documentation or authorized dealerships. These sources will provide the most accurate details regarding the available features and options during the vehicle's production years.

Safety Features and Ratings

The Mitsubishi Minicab 660 Simple Dump, produced between 1991 and 1999, was primarily designed for commercial use, with an emphasis on utility rather than extensive safety features. While the vehicle provided basic safety measures, it did not incorporate advanced safety technologies or obtain official safety ratings during its production period.

The Minicab 660 Simple Dump did not come equipped with airbags for the driver or passengers. Additionally, features such as side airbags, side impact bars, TCS (Traction Control System), and brake assist were not available in the vehicle. The focus of the Minicab 660 Simple Dump was on its practical functionality rather than advanced safety technologies.

However, it is important to note that the Minicab 660 Simple Dump's structure and construction were designed to meet applicable safety regulations and provide a certain level of occupant protection. The vehicle's robust construction and engineering aimed to provide a safe and reliable work environment for its users.

To ensure safety during operation, it is essential to adhere to recommended weight limits and follow safe driving practices. Properly securing cargo and maintaining appropriate tire pressure are crucial for maintaining stability and handling characteristics.

It is worth mentioning that the absence of official safety ratings for the Minicab 660 Simple Dump is due to the vehicle's primary purpose as a commercial work vehicle rather than a passenger vehicle. Safety ratings are typically assigned to vehicles intended for personal transportation.

For precise and up-to-date information regarding the safety features and guidelines for the Minicab 660 Simple Dump, it is recommended to consult official Mitsubishi documentation or authorized dealerships. These sources will provide the most accurate details regarding the safety measures implemented in the vehicle and guidelines for safe operation.

To further enhance safety, it is advisable to follow local traffic regulations, utilize appropriate personal protective equipment, and undergo proper training for operating a commercial vehicle.

Conclusion

The Mitsubishi Minicab 660 Simple Dump, produced from 1991 to 1999, offered a practical and reliable solution for commercial users in need of a compact and efficient vehicle. With its compact dimensions, efficient engine, and versatile cargo bed, the Minicab 660 Simple Dump proved to be a capable work companion.

The Minicab 660 Simple Dump excelled in its utilitarian design, providing a functional dump bed at the rear that allowed for convenient loading and unloading of various materials. The vehicle's cargo capacity and payload capability made it suitable for a range of commercial applications, from construction and agriculture to small-scale transportation needs.

Despite its emphasis on practicality, the Minicab 660 Simple Dump also offered commendable fuel efficiency. Its efficient engine, combined with aerodynamic design considerations, allowed for cost-effective operation and extended range. The vehicle's fuel consumption ratings positioned it as an economical choice for daily commercial use.

While the Minicab 660 Simple Dump prioritized its commercial functionality, it provided a straightforward and user-friendly driving experience. The interior, though basic, offered convenient access to essential controls and a simple layout that facilitated efficient operation.

It is important to note that the Minicab 660 Simple Dump, being primarily designed for commercial purposes, did not incorporate advanced safety features commonly found in passenger vehicles. However, its construction and engineering aimed to meet applicable safety standards and provide a safe working environment for users.

The Minicab 660 Simple Dump's suspension system, combined with its compact size, enabled nimble maneuverability and stability in various driving conditions. The vehicle's lightweight construction contributed to its agile nature, making it well-suited for urban driving and navigating tight spaces.

Overall, the Mitsubishi Minicab 660 Simple Dump from 1991 to 1999 proved to be a reliable and practical choice for commercial users. Its focus on functionality, fuel efficiency, and cargo-carrying capabilities made it a valuable asset in various work environments.

For precise and up-to-date information regarding specific details, configurations, or safety guidelines, it is recommended to consult official Mitsubishi documentation or authorized dealerships. These sources will provide the most accurate information for potential users or owners of the Minicab 660 Simple Dump.

FAQ: Frequently Asked Questions about the 1991-1999 Mitsubishi Minicab 660 Simple Dump

What is the period of production for the Mitsubishi Minicab 660 Simple Dump?

The Mitsubishi Minicab 660 Simple Dump was produced from January 1991 to July 1999.

What are the available drive wheels and traction options for the Minicab 660 Simple Dump?

The Minicab 660 Simple Dump is equipped with 4WD (Four-Wheel Drive) for enhanced traction and drivetrain capabilities.

What body type does the Minicab 660 Simple Dump have?

The Minicab 660 Simple Dump features a commercial van body type, specifically designed for practical cargo transportation.

What is the transmission gearbox configuration for the Minicab 660 Simple Dump?

The Minicab 660 Simple Dump comes with a 5-speed manual transmission gearbox for efficient power delivery and control.

What is the engine size and displacement of the Minicab 660 Simple Dump?

The Minicab 660 Simple Dump is powered by a 657 cm3 (40 cu-in) engine, providing sufficient power for its commercial applications.

Are there different engine types available for the Minicab 660 Simple Dump?

The Minicab 660 Simple Dump features a water-cooled 4-cycle SOHC 3-cylinder engine, ensuring reliable performance and fuel efficiency.

What are the different engine names or engine codes associated with the Minicab 660 Simple Dump?

The engine code for the Minicab 660 Simple Dump is 3G83, indicating the specific engine variant used in this model.

What are the exterior dimensions of the Minicab 660 Simple Dump?

The Minicab 660 Simple Dump has an exterior length of approximately 329.5 cm (129.72 inches), an exterior width of around 139.5 cm (54.92 inches), and an exterior height of approximately 183 cm (72.04 inches).

How much does the Minicab 660 Simple Dump weigh?

The weight of the Minicab 660 Simple Dump is approximately 780 kg (1719 lbs), making it a lightweight vehicle that contributes to its agility and fuel efficiency.

What is the fuel tank capacity of the Minicab 660 Simple Dump?

The Minicab 660 Simple Dump has a fuel tank capacity of 10.5 US gallons or 8.7 UK gallons or 40 liters, providing ample fuel for extended journeys.

What is the fuel consumption rating of the Minicab 660 Simple Dump?

The Minicab 660 Simple Dump achieves a fuel consumption rate of approximately 54.7 mpg US (65.6 mpg UK or 4.3 L/100km) in the 60 km/h mode, showcasing its efficiency and cost-effectiveness.

What type of suspension does the Minicab 660 Simple Dump have?

The Minicab 660 Simple Dump is equipped with a front MacPherson strut coil spring suspension and a rear semicircle leaf spring suspension, providing a balance between comfort and load-carrying capabilities.

What are the available exterior features of the Minicab 660 Simple Dump?

The Minicab 660 Simple Dump does not come with additional exterior features such as sunroofs, spoilers, or fog lamps, as it focuses primarily on its utilitarian design and functionality.

What interior features are included in the Minicab 660 Simple Dump?

The Minicab 660 Simple Dump's interior is designed with simplicity in mind and does not offer features such as power windows, power steering, or leather seats. It provides a straightforward and functional cabin layout for commercial use.

Does the Minicab 660 Simple Dump have any safety features?

The Minicab 660 Simple Dump is designed to meet applicable safety regulations but does not incorporate advanced safety features commonly found in passenger vehicles. It is important to follow safe driving practices and adhere to weight limits for optimal safety.

Can I use the Minicab 660 Simple Dump for transporting heavy payloads?

Yes, the Minicab 660 Simple Dump is designed to handle considerable payloads within its cargo bed. However, it is essential to adhere to recommended weight limits and distribute the load properly for safe operation.

Is the Minicab 660 Simple Dump suitable for urban driving and maneuvering?

Yes, the Minicab 660 Simple Dump's compact dimensions, lightweight construction, and tight turning circle make it well-suited for urban driving, maneuvering in tight spaces, and navigating congested areas.

Is the Minicab 660 Simple Dump available with advanced safety technologies?

No, the Minicab 660 Simple Dump does not come with advanced safety technologies such as airbags, traction control systems, or brake assist. Its design prioritizes functionality and practicality over advanced safety features commonly found in passenger vehicles.


Brian Wong - Senior Reviews Editor of cars-directory.net

Brian Wong / Author

Brian Wong is an accomplished automotive journalist and editor with a passion for cars. With over a decade of experience in the industry, he has established himself as a trusted voice in the automotive community. Brian has written extensively about a wide range of topics in the field, from the latest trends in car design to innovative safety features and emerging technologies. As a senior reviews editor, he is responsible for test driving and analyzing the latest cars on the market, providing readers with accurate and objective reviews. His articles are widely read and respected for their depth of knowledge and analysis. Brian is committed to staying at the forefront of the latest developments in the automotive industry, and is dedicated to sharing his expertise and insights with his readers.

Add Comment

 * - The field should be filled
* Your Name:
 Contact (e-mail, phone...):
* Comments:
Photos: