2002 Mitsubishi Toppo BJ 660 M limited Specs

OVERVIEW

With a fuel consumption of 39.2 mpg US - 47 mpg UK - 6.0 L/100km, a weight of 1895 lbs (860 kg), the Mitsubishi Toppo BJ 660 M limited has a SOHC12 valve 3 cylinder engine, a Regular gasoline engine 3G83. This engine 3G83 produces a maximum power of 50.6 PS (50 bhp - 37.2 kW) at 6500 rpm and a maximum torque of 61.7 Nm (45.5 lb.ft - 6.3 kg.m) at 4000 rpm. The engine power is transmitted to the road by the four wheel drive (4WD) with a 5MT gearbox. For stopping power, the Mitsubishi Toppo BJ 660 M limited braking system includes Leading trailing drum brake at the rear and Disk at the front. Stock tire sizes are 155/70 on 13 inch rims at the rear and 155/70 on 13 inch rims at the front. Chassis details - Mitsubishi Toppo BJ 660 M limited has torque arm 3 link rear suspension and McPherson strut front suspension for road holding and ride confort.

Add to compare list

- Present
- Option
- Not Present (or Dealer Option)

• Search Car Specs
• Other Toppo BJ Specs Database

By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on April 16, 2024

Introduction to the Mitsubishi Toppo BJ 660 M Limited

The 2002-2003 Mitsubishi Toppo BJ 660 M Limited, a distinctive member of the Toppo lineup, captured attention with its unique blend of compact dimensions and practicality. Designed as a versatile kei minivan, this model catered to urban needs with its efficient size and resourceful features.

During its production span from September 2002 to July 2003, the Toppo BJ 660 M Limited boasted 4WD traction, making it apt for various road conditions. Its drivetrain was complemented by a 5-speed manual transmission, providing precise control over its capabilities.

This kei minivan accommodated four passengers within its well-configured two-row seating arrangement. The interior dimensions, including the length of 173.5 cm and width of 122 cm, provided comfort within a compact footprint. Its thoughtful design extended to features like power windows, power steering, and centralized door locking for convenience.

One of its notable attributes was the 657 cm3 engine under its hood, marked by the engine code 3G83. With a power output of 50.6 PS and a torque of 61.7 Nm, this engine offered commendable performance while maintaining fuel efficiency. The Regular gasoline-fueled engine adhered to the Super Low Emission Vehicle (G-LEV) standards.

Safety was a key focus, evident through standard driver and passenger airbags, reinforced side impact bars, and a durable frame. Essential safety features like safety belt pretensioners and a 3-point safety belt system added to the overall security package.

The Toppo BJ 660 M Limited rode on McPherson strut front suspension and a torque arm 3-link rear suspension, providing stability on the road. Its compact size was complemented by 155/70 R13 tires on both front and rear, contributing to its agile maneuverability.

This Mitsubishi model catered to diverse needs, combining utility with comfortable interiors and safety considerations. The 2002-2003 Mitsubishi Toppo BJ 660 M Limited showcased a balance of practicality and innovation within the kei car segment, earning its place as an intriguing choice for urban drivers seeking efficiency without compromise.

Model Years: 2002-2003 Overview

The model years 2002-2003 marked a notable phase in the Mitsubishi Toppo series with the introduction of the BJ 660 M Limited. This compact minivan showcased the brand's commitment to creating vehicles that blend functionality and efficiency seamlessly.

With its production spanning from September 2002 to July 2003, the Toppo BJ 660 M Limited carried forward Mitsubishi's legacy of crafting vehicles for urban living. This particular model catered to drivers seeking a combination of maneuverability, interior space, and innovative features.

The core focus of the Toppo BJ 660 M Limited was its ability to provide a comfortable and convenient driving experience within the constraints of city life. Its 4WD traction ensured that drivers could confidently navigate different road conditions, while the 5-speed manual transmission allowed for precise control over gear shifts.

The unique selling point of this model lay in its compact dimensions. As a kei minivan with a two-row seating configuration, it effectively utilized its space to offer seating for four passengers. The exterior dimensions, including the length of 339.5 cm, width of 147.5 cm, and height of 169.5 cm, made it adept at weaving through crowded streets and parking in tight spaces.

Mitsubishi prioritized efficiency without compromising on performance. The 657 cm3 engine, identified by the engine code 3G83, delivered 50.6 PS of power and 61.7 Nm of torque, contributing to its agile character on the road. This powertrain not only met the necessary emissions standards but also adhered to Super Low Emission Vehicle (G-LEV) requirements.

The Toppo BJ 660 M Limited also underscored its commitment to safety. The inclusion of driver and passenger airbags, as well as side impact bars, demonstrated a dedication to protecting occupants. The model's sturdy frame further added to the overall safety package.

In summary, the 2002-2003 Mitsubishi Toppo BJ 660 M Limited encapsulated Mitsubishi's philosophy of urban-focused vehicles. By merging compact dimensions with practical features, it offered an appealing choice for drivers seeking efficiency, agility, and convenience in their daily commutes.

Generations and Evolution

The 2002-2003 Mitsubishi Toppo BJ 660 M Limited represented a significant phase in the evolution of the Toppo series. As a kei minivan, this model embraced Mitsubishi's commitment to urban mobility and compact functionality.

With its production spanning from September 2002 to July 2003, the Toppo BJ 660 M Limited brought forth a new generation of compact vehicles designed to cater to the evolving needs of city dwellers. This generation aimed to strike a balance between efficient use of space and innovative features.

Compared to its predecessors, this iteration showcased a refined approach to design and engineering. The exterior dimensions of 339.5 cm in length, 147.5 cm in width, and 169.5 cm in height revealed the model's commitment to maintaining a compact footprint, making it ideal for navigating crowded streets and fitting into tight parking spaces.

The Toppo BJ 660 M Limited's design evolution extended to its interior layout and features. The interior length of 173.5 cm and width of 122 cm ensured comfortable seating for four passengers, while the incorporation of power windows, power steering, and centralized door locking demonstrated a move towards enhanced convenience.

One of the standout aspects of this generation was its powertrain innovation. The 657 cm3 engine, identified by the engine code 3G83, not only met emission standards but also aligned with Super Low Emission Vehicle (G-LEV) requirements. This showcased Mitsubishi's dedication to environmental responsibility alongside performance.

Safety also saw evolutionary improvements in this generation. Standard driver and passenger airbags, along with side impact bars and a durable frame, underscored the brand's commitment to occupant protection. This enhancement reflected the ongoing evolution of safety technology within the automotive industry.

In essence, the 2002-2003 Mitsubishi Toppo BJ 660 M Limited marked an important milestone in the generational progression of the Toppo series. By adapting to the demands of urban living through compact design, innovative features, and advanced safety measures, this generation solidified Mitsubishi's reputation for producing vehicles that catered to the evolving needs of modern drivers.

Engine Types and Performance

The heart of the 2002-2003 Mitsubishi Toppo BJ 660 M Limited resided in its innovative engine design, showcasing the brand's commitment to efficient performance. This model's engineering placed a strong emphasis on achieving a harmonious blend of power, fuel efficiency, and compliance with emission standards.

At the core of this kei minivan was the 657 cm3 engine with the engine code 3G83, which stood out for its balance of power delivery and environmental responsibility. With a maximum power output of 50.6 PS and a torque of 61.7 Nm, the engine demonstrated its capability in urban driving scenarios while remaining mindful of fuel consumption.

The engine's Single Overhead Cam (SOHC) design and 12 valves highlighted Mitsubishi's dedication to precision engineering. This configuration not only contributed to the engine's performance but also played a role in meeting Super Low Emission Vehicle (G-LEV) standards. The use of Regular gasoline allowed for versatility in fuel options.

The model's powertrain was paired with a 5-speed manual transmission, offering drivers the ability to seamlessly manage gear shifts. This transmission setup not only contributed to the overall driving experience but also played a role in optimizing fuel efficiency.

With a Compression Ratio of 10, the engine showcased its ability to balance power and efficiency. This balance extended to the 1st to 5th Gear Ratios, designed to suit various driving conditions and maintain a consistent driving experience.

In summary, the 2002-2003 Mitsubishi Toppo BJ 660 M Limited's engine and performance characteristics epitomized the brand's commitment to innovation and efficiency. With meticulous engineering, careful calibration, and a focus on meeting emission standards, this model offered a well-rounded driving experience that catered to both performance enthusiasts and environmentally conscious drivers.

Dimensions and Sizes

The 2002-2003 Mitsubishi Toppo BJ 660 M Limited made a distinctive mark in the automotive landscape with its compact dimensions and well-utilized space. This kei minivan embodied Mitsubishi's commitment to designing vehicles that thrive in urban environments by maximizing interior room while maintaining a compact exterior footprint.

The exterior dimensions of the Toppo BJ 660 M Limited showcased its urban-friendly size. With a length of 339.5 cm, width of 147.5 cm, and height of 169.5 cm, this model effortlessly maneuvered through tight city streets and easily found parking spaces. The exterior dimensions didn't compromise on its stylish appearance, emphasizing a harmonious blend of form and function.

Stepping inside, the interior dimensions continued to emphasize efficient use of space. The interior length of 173.5 cm and width of 122 cm catered to four passengers, providing ample room for comfortable seating. The interior height of 142 cm further contributed to a cozy yet accommodating atmosphere.

The overall wheelbase of 234 cm facilitated stable handling and a smooth ride, while the front and rear axle lengths of 130 cm and 129.5 cm respectively, complemented the vehicle's balanced proportions. The minimum turning circle of 4.4 meters enabled nimble U-turns and hassle-free maneuvering in urban environments.

The Toppo BJ 660 M Limited's practicality extended to its weight, coming in at 860 kg. This weight was a testament to its lightweight design philosophy, contributing to its agile character on the road and its ability to maintain fuel efficiency.

Moreover, this model's dimensions played a crucial role in its aesthetic appeal. The ride height of 16 cm and standard 155/70 R13 tires on both front and rear further reinforced its urban prowess, providing the perfect balance of ground clearance and road contact.

In essence, the 2002-2003 Mitsubishi Toppo BJ 660 M Limited showcased Mitsubishi's ability to make the most of compact dimensions. By thoughtfully designing both exterior and interior proportions, this model offered a harmonious blend of practicality and style that resonated with urban drivers seeking a balance between maneuverability and spaciousness.

Trim Levels and Features

The 2002-2003 Mitsubishi Toppo BJ 660 M Limited exemplified the brand's dedication to offering a thoughtful blend of trim levels and features that catered to various urban driving needs. This model, designed for efficient city commuting, provided a range of amenities to enhance both convenience and comfort.

The Toppo BJ 660 M Limited was available in a single trim level, the "660 M Limited." Despite its singular offering, this trim level boasted a comprehensive set of features that resonated with drivers seeking practicality and modern conveniences.

Inside the cabin, occupants were greeted with power windows, a feature that added a touch of ease to urban driving. Power steering further contributed to a comfortable and effortless driving experience, making navigation through city streets a breeze. The centralized door locking system added an extra layer of security while enhancing overall convenience.

Keyless entry was a noteworthy feature of the Toppo BJ 660 M Limited, allowing drivers to access their vehicle without the need to fumble for keys. This feature streamlined the process of entering and exiting the vehicle, particularly in busy urban scenarios.

The interior's design emphasized functionality and practicality, with a layout designed to accommodate four passengers in comfort. The rear seats were removable, contributing to the model's adaptability and versatility in carrying varying amounts of cargo.

The exterior featured power-adjustable door mirrors, enhancing visibility and making adjustments effortless. The inclusion of ultraviolet glass protection further contributed to a comfortable cabin environment by reducing the sun's glare and heat.

While the trim level didn't encompass extravagant features like a sunroof or xenon lamps, it catered to the core urban driving experience by focusing on practicality, safety, and comfort. In summary, the 2002-2003 Mitsubishi Toppo BJ 660 M Limited's single trim level demonstrated Mitsubishi's understanding of urban drivers' needs, offering a thoughtfully curated set of features that contributed to a convenient and enjoyable driving experience in bustling city environments.

Fuel Tank Capacity and Fuel Consumption

The 2002-2003 Mitsubishi Toppo BJ 660 M Limited excelled in fuel efficiency, aligning with Mitsubishi's commitment to producing vehicles that effectively balanced performance with economical operation. This kei minivan's design catered to urban drivers seeking an economical and eco-friendly commuting solution.

The Toppo BJ 660 M Limited featured a fuel tank capacity of 30 liters, equating to approximately 7.9 US gallons or 6.5 UK gallons. This capacity showcased the model's focus on efficient fuel consumption, making it well-suited for city driving where refueling stops could be minimized.

Fuel consumption was an area of strength for the Toppo BJ 660 M Limited. In the 10/15 mode test cycle, the model achieved a remarkable fuel consumption rate of 6.0 L/100km, equivalent to approximately 39.2 mpg US or 47 mpg UK. This impressive fuel efficiency aligned with the kei car category's reputation for economical operation.

The 657 cm3 engine, identified by the engine code 3G83, played a pivotal role in achieving these fuel economy figures. Mitsubishi's engineering prowess combined with the Regular gasoline fuel type and a Compression Ratio of 10 contributed to a balance between power and efficiency.

This fuel-conscious approach was further reinforced by the transmission's gear ratios. The 5-speed manual transmission allowed for precise gear selection, enabling the driver to optimize engine performance while minimizing fuel consumption.

In conclusion, the 2002-2003 Mitsubishi Toppo BJ 660 M Limited's emphasis on fuel tank capacity and fuel consumption underscored its status as an economical choice for urban drivers. With its efficient fuel usage and an engineering focus on achieving a harmonious balance between performance and economy, this model solidified its position as a reliable and eco-conscious option for city commutes.

Fuel Efficiency (MPG) Insights

The 2002-2003 Mitsubishi Toppo BJ 660 M Limited stood out in the realm of fuel efficiency, embodying Mitsubishi's dedication to producing vehicles that excel in economical operation. This kei minivan's fuel efficiency, measured in miles per gallon (MPG), underscored its ability to balance performance with responsible fuel usage.

The Toppo BJ 660 M Limited's fuel efficiency was a standout feature, especially in city driving scenarios. The model's ability to achieve approximately 39.2 mpg in the US, or 47 mpg in the UK, highlighted its efficiency in consuming fuel over both short and extended distances. This made it an ideal choice for urban drivers who frequently faced traffic congestion and stop-and-go situations.

The 657 cm3 engine, recognized by the engine code 3G83, played a pivotal role in achieving these impressive fuel economy figures. Mitsubishi's engineering prowess and the implementation of technologies that emphasized fuel efficiency contributed to this commendable performance.

The model's 5-speed manual transmission played a significant role in optimizing fuel efficiency. The transmission's gear ratios were thoughtfully designed to align with the engine's power delivery, enabling the vehicle to operate efficiently across various driving conditions.

Furthermore, the Toppo BJ 660 M Limited's lightweight design and compact dimensions played a vital role in its fuel efficiency. The model's weight of 860 kg and aerodynamic shape contributed to reduced resistance, resulting in better fuel economy.

In essence, the 2002-2003 Mitsubishi Toppo BJ 660 M Limited's fuel efficiency insights illustrated its commitment to offering an economical driving experience. By skillfully engineering the powertrain, transmission, and overall vehicle design, Mitsubishi crafted a vehicle that not only excelled in urban maneuverability but also showcased an impressive fuel efficiency that resonated with drivers conscious of their environmental impact and cost of operation.

Wheel Options and Suspension

The 2002-2003 Mitsubishi Toppo BJ 660 M Limited showcased a well-engineered suspension system and carefully chosen wheel options, contributing to its agile handling and comfortable ride quality. This kei minivan's suspension setup and wheel choices were designed to ensure a balanced and controlled driving experience on various road surfaces.

The Toppo BJ 660 M Limited featured a McPherson strut front suspension, a design recognized for its ability to provide responsive handling and effective shock absorption. This front suspension configuration played a pivotal role in ensuring stable and predictable behavior during cornering and maneuvers, making it ideal for urban driving.

At the rear, the torque arm 3-link suspension further enhanced the model's overall suspension dynamics. This suspension type effectively managed rear wheel movement, contributing to stability and a comfortable ride for both drivers and passengers.

Wheel options played a significant role in both the model's aesthetics and performance. The Toppo BJ 660 M Limited sported 155/70 R13 tires on both the front and rear, offering a balanced combination of grip, comfort, and efficiency. The choice of tire size contributed to the model's compact dimensions, making it ideal for urban navigation.

The use of 155/70 R13 tires also aligned with the model's lightweight and fuel-efficient design philosophy. This tire size ensured optimal contact with the road, promoting stability and responsive handling while keeping the overall weight in check.

In conclusion, the 2002-2003 Mitsubishi Toppo BJ 660 M Limited's well-considered suspension system and carefully selected wheel options contributed to its agile and comfortable performance. By choosing suspension components that balanced handling and ride quality, and by opting for tire dimensions that complemented the vehicle's dimensions and characteristics, Mitsubishi crafted a kei minivan that catered to drivers seeking a capable and enjoyable driving experience in urban environments.

Popular Keywords Explained: Specs and Specifications

The 2002-2003 Mitsubishi Toppo BJ 660 M Limited garnered attention for its impressive set of specifications, encompassing a range of features that contributed to its urban-friendly design and efficient performance. Understanding these key specifications sheds light on the model's strengths and its ability to cater to the needs of city drivers.

The term "specs" or "specifications" encompasses a comprehensive set of information that defines a vehicle's attributes. In the case of the Toppo BJ 660 M Limited, its specifications include details like its engine size, power output, torque, transmission type, and fuel efficiency. These specifications provide valuable insights into the model's capabilities and characteristics.

The kei minivan's compact dimensions, highlighted by its exterior length, width, and height, are essential specifications that directly contribute to its agility and ease of maneuverability in urban environments. These dimensions are integral to the vehicle's ability to navigate through tight spaces and congested city streets.

The engine's specifications, such as its displacement and power output, are crucial indicators of its performance capabilities. The 657 cm3 engine, identified by the engine code 3G83, delivers 50.6 PS of power and 61.7 Nm of torque. These specifications not only influence the model's acceleration but also contribute to its overall efficiency.

The transmission's specifications, including the number of speeds and gear ratios, define how power is transferred from the engine to the wheels. The Toppo BJ 660 M Limited's 5-speed manual transmission offers a balance between precise control and efficient gear changes, allowing drivers to make the most of the engine's power delivery.

Fuel efficiency, another key specification, is represented by the model's fuel consumption figures, measured in miles per gallon (MPG) or liters per 100 kilometers (L/100km). The Toppo BJ 660 M Limited's impressive fuel economy aligns with its role as an urban commuter vehicle.

In essence, understanding the specifications of the 2002-2003 Mitsubishi Toppo BJ 660 M Limited provides a comprehensive view of its design, performance, and efficiency. These specifications collectively define the model's character and its suitability for urban driving, making it a practical and informed choice for drivers seeking an efficient and capable vehicle for city commutes.

Unveiling Fuel Capacity and Average

The 2002-2003 Mitsubishi Toppo BJ 660 M Limited unveiled an impressive balance between fuel capacity and fuel efficiency, showcasing the model's dedication to economical urban driving. Delving into the details of fuel capacity and average consumption sheds light on how this kei minivan catered to drivers seeking both convenience and cost-effectiveness.

Fuel capacity refers to the amount of fuel a vehicle's tank can hold, determining how far the vehicle can travel before needing to refuel. In the case of the Toppo BJ 660 M Limited, its fuel tank capacity of 30 liters or approximately 7.9 US gallons emphasized its efficiency-driven design. This capacity was optimized to align with its role as a city-focused vehicle, reducing the need for frequent refueling stops.

Average fuel consumption, often measured in miles per gallon (MPG) or liters per 100 kilometers (L/100km), offers insights into a vehicle's efficiency over varied driving conditions. The Toppo BJ 660 M Limited excelled in this aspect, achieving an average fuel consumption of approximately 39.2 mpg US or 47 mpg UK. This commendable figure highlighted its ability to cover substantial distances on a relatively small amount of fuel, making it a practical choice for urban drivers.

The combination of an efficient fuel tank capacity and impressive fuel efficiency underscores the Toppo BJ 660 M Limited's suitability for city living. Its ability to cover longer distances while minimizing fuel stops made it an economical option for daily commutes, errands, and even longer journeys.

This efficient fuel management aligns with Mitsubishi's dedication to producing vehicles that prioritize practicality and economical operation. By unveiling a well-balanced approach to fuel capacity and average consumption, the Toppo BJ 660 M Limited showcased its ability to meet the needs of drivers seeking a cost-effective and sustainable urban driving solution.

Exploring Lesser-Known Aspects: Engine and Wheel Details

The 2002-2003 Mitsubishi Toppo BJ 660 M Limited offers a wealth of lesser-known aspects that contribute to its unique character and performance. Delving into the specifics of the engine and wheel details provides insights into the model's design philosophy and its ability to cater to the demands of urban driving.

The engine, represented by the engine code 3G83, stands as a testament to Mitsubishi's engineering prowess. This Single Overhead Cam (SOHC) engine features 12 valves, which allow for precise control of airflow and fuel injection. This configuration not only optimizes combustion but also contributes to the engine's efficiency and power delivery.

The engine's bore and stroke dimensions of 6.5 cm and 6.6 cm respectively play a pivotal role in determining the engine's characteristics. These dimensions influence factors like displacement, torque, and power delivery, highlighting Mitsubishi's attention to detail in balancing performance with fuel efficiency.

Turning to the wheels, the Toppo BJ 660 M Limited showcases a harmonious combination of tire dimensions and suspension design. The McPherson strut front suspension and torque arm 3-link rear suspension work in tandem with the choice of 155/70 R13 tires on both the front and rear. This combination emphasizes stability, agility, and comfort, allowing the model to effectively navigate urban roads while maintaining a comfortable ride.

The lightweight aluminum disk wheels contribute to the overall efficiency of the vehicle. By reducing unsprung weight, these wheels enhance suspension response and fuel efficiency, aligning with the Toppo BJ 660 M Limited's commitment to economical and practical driving.

In essence, exploring the lesser-known aspects of the 2002-2003 Mitsubishi Toppo BJ 660 M Limited's engine and wheel details reveals the meticulous engineering that underpins its design. From the carefully considered valve configuration to the choice of tire dimensions and lightweight wheels, these aspects collectively contribute to the model's dynamic performance and its ability to cater to the nuances of urban driving.

Conclusion: The 2002-2003 Mitsubishi Toppo BJ 660 M Limited

The 2002-2003 Mitsubishi Toppo BJ 660 M Limited encapsulates the essence of efficient urban driving, offering a harmonious blend of compact dimensions, economical performance, and thoughtful design. From its inception, this kei minivan was engineered to cater to the demands of city dwellers seeking a reliable and practical commuting solution.

With its compact exterior dimensions, the Toppo BJ 660 M Limited effortlessly navigates through city streets, making tight turns and parking maneuvers hassle-free. The well-utilized interior space, complemented by the removable rear seats, offers versatility that adapts to various passenger and cargo needs, making it ideal for a range of daily activities.

The heart of this model lies in its 657 cm3 engine, paired with a 5-speed manual transmission. The engine's specifications, including power output and torque, are thoughtfully balanced to provide agile acceleration while maintaining impressive fuel efficiency. The model's performance on urban roads is further enhanced by its well-tuned suspension system and the choice of 155/70 R13 tires, ensuring a comfortable and controlled ride.

The Toppo BJ 660 M Limited's focus on fuel efficiency is evident in its 30-liter fuel tank capacity and remarkable average fuel consumption figures. These specifications align with Mitsubishi's commitment to economical operation and contribute to its role as a dependable city companion.

Moreover, this model's attention to practical features such as power windows, keyless entry, and power-adjustable door mirrors underscores its understanding of urban drivers' needs. It's a testament to Mitsubishi's ability to integrate modern conveniences seamlessly into the model's design.

In conclusion, the 2002-2003 Mitsubishi Toppo BJ 660 M Limited emerges as a refined urban solution that combines compact dimensions, efficient performance, and versatile functionality. By embodying Mitsubishi's dedication to engineering innovation and a driver-centric approach, this kei minivan stands as a testament to the brand's commitment to delivering vehicles that excel in urban environments.

FAQ: All You Need to Know About the 2002-2003 Mitsubishi Toppo BJ 660 M Limited