1995 Nissan Datsun 2.7DT AX Specs

OVERVIEW

With a fuel consumption of 36.7 mpg US - 44.1 mpg UK - 6.4 L/100km, a weight of 3880 lbs (1760 kg), the Nissan Datsun 2.7DT AX has a water cooling 4 cylinder OHV engine, a Light oil engine TD27T. This engine TD27T produces a maximum power of 101.3 PS (100 bhp - 74.5 kW) at 4000 rpm and a maximum torque of 215.7 Nm (159.1 lb.ft - 22 kg.m) at 2200 rpm. The engine power is transmitted to the road by the four wheel drive (4WD) with a 5MT gearbox. For stopping power, the Nissan Datsun 2.7DT AX braking system includes Leading trailing drum brake at the rear and Ventilated disk at the front. Chassis details - Nissan Datsun 2.7DT AX has rigid axle axle type semicircle leaf spring rear suspension and double wishbone torsion bar spring front suspension for road holding and ride confort.

Add to compare list

- Present
- Option
- Not Present (or Dealer Option)

• Search Car Specs
• Other Datsun Specs Database

More photos Nissan Datsun

By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on April 20, 2024

Introduction to the 1995-1996 Nissan Datsun 2.7DT AX

The 1995-1996 Nissan Datsun 2.7DT AX was a notable addition to Nissan's lineup during its production years from August 1995 to December 1996. This commercial van gained recognition for its distinctive features and specifications.

Body Type and Drive: This vehicle featured a body type classified as a Commercial Van and boasted a 4WD (Four-Wheel Drive) configuration. Its robust drivetrain made it suitable for a range of driving conditions.

Transmission: Equipped with a 5-speed manual transmission, the 1995-1996 Nissan Datsun 2.7DT AX provided drivers with precise control over gear shifts, enhancing its overall performance.

Engine Power: Under the hood, the 2.7DT AX housed a TD27T engine, delivering a commendable power output of 101.3 PS (or approximately 100 bhp) at 4000 rpm. This engine's performance capabilities contributed to the vehicle's versatility and utility.

Dimensions and Weight: In terms of size and dimensions, the 2.7DT AX measured 469 cm in length, 169 cm in width, and 172.5 cm in height. With a wheelbase of 295 cm and a ground clearance of 20.5 cm, it struck a balance between maneuverability and ground clearance. The vehicle's weight was approximately 1760 kg.

Seating Capacity and Doors: This commercial van accommodated up to five passengers and featured four doors, enhancing accessibility for both passengers and cargo.

Fuel Tank Capacity: The 1995-1996 Nissan Datsun 2.7DT AX was equipped with a 60-liter fuel tank, providing ample capacity for extended journeys without frequent refueling stops.

Suspension and Brakes: Its front suspension utilized a double wishbone torsion bar spring setup, while the rear suspension employed a rigid axle with semicircle leaf springs. The front brakes featured ventilated discs, and the rear brakes utilized leading trailing drum brake technology.

Tires and Rims: The vehicle was equipped with 215 R15-8PRLT tires, ensuring good traction on various road surfaces. It featured standard aluminum disks.

Interior and Safety: Inside the 2.7DT AX, occupants enjoyed standard power windows, power steering, and a tachometer. Safety features included side impact bars for added protection.

Additional Features: The vehicle's amenity list included options such as a radio and an autoreverse cassette player.

Special Equipment: Notably, it offered options like Limited Slip Differential (LSD), a front stabilizer, and an additional stoplight.

The 1995-1996 Nissan Datsun 2.7DT AX was a versatile commercial van known for its robust performance, spacious interior, and an array of features suitable for various needs. Its unique combination of specifications made it a popular choice among businesses and individuals seeking a reliable workhorse.

Model Overview and History

The 1995-1996 Nissan Datsun 2.7DT AX holds a distinct place in the history of commercial vans, representing a period of innovation and utility in Nissan's lineup during those years.

Historical Context: This model was introduced during a time when the automotive industry was evolving rapidly, with an increasing demand for versatile and capable commercial vehicles. Nissan, a renowned name in the automotive world, aimed to address this demand with the 2.7DT AX.

Market Position: Positioned as a commercial van, the 1995-1996 Datsun 2.7DT AX catered to a wide range of businesses and industries. Its reputation for reliability and robust performance contributed to its popularity among businesses requiring a dependable workhorse.

Unique Features: What set this model apart were its 4WD capability and the inclusion of a 5-speed manual transmission, offering enhanced traction and control. This made it particularly suitable for various terrains and driving conditions.

Legacy: While the 1995-1996 Nissan Datsun 2.7DT AX may not be as widely recognized as some of Nissan's other models, it left a lasting legacy in the commercial vehicle sector. Its durability and versatility ensured that many of these vans continued to serve their owners for years, making them a reliable choice for businesses.

Popularity: Over the years, the 2.7DT AX gained popularity in certain regions and industries, especially among those requiring a rugged vehicle for transportation and logistics. Its affordability and cost-effectiveness made it an attractive option for small businesses and entrepreneurs.

Evolution: Although this particular model had a relatively short production span, it reflected Nissan's commitment to meeting the evolving needs of the market. Its features and capabilities represented a step forward in the design and engineering of commercial vehicles during that era.

In summary, the 1995-1996 Nissan Datsun 2.7DT AX holds a unique place in automotive history as a commercial van that combined reliability, versatility, and innovative features. Its role in serving businesses and industries during its production years highlights its significance in the automotive landscape.

Engine Specifications

The heart of the 1995-1996 Nissan Datsun 2.7DT AX lies in its engine specifications, which played a crucial role in defining its performance and utility.

Engine Power: Powering this commercial van is the TD27T engine. It delivers a maximum power output of approximately 101.3 PS (100 bhp) at 4000 rpm. This level of power provided the 2.7DT AX with the necessary muscle to handle a variety of tasks and driving conditions.

Torque: The engine generates a substantial maximum torque of about 215.7 Nm (159.1 lb.ft) at 2200 rpm. This torque figure is indicative of the engine's ability to handle heavy loads and maintain performance, particularly in low and mid-range RPMs.

Engine Type: The TD27T engine is a water-cooled 4-cylinder OHV (Overhead Valve) powerplant. Its design prioritizes durability and efficiency, making it well-suited for the demands of commercial use.

Charger: An additional feature of this engine is the presence of a charger, which contributes to improved performance and responsiveness. This feature enhances the engine's efficiency, particularly when accelerating and carrying heavy loads.

Fuel Type and Efficiency: The 2.7DT AX runs on light oil, making it economical in terms of fuel consumption. It achieves a fuel consumption rating of approximately 36.7 mpg US (44.1 mpg UK) or 6.4 L/100km in the 60 km/h mode. This efficiency, combined with a 60-liter fuel tank, ensures extended driving ranges between refueling stops.

In summary, the engine specifications of the 1995-1996 Nissan Datsun 2.7DT AX underline its capabilities as a commercial workhorse. The TD27T engine, with its power, torque, and efficiency characteristics, played a vital role in making this vehicle a dependable choice for businesses and individuals with diverse transportation needs.

Fuel Efficiency and MPG

Efficiency is a key consideration when assessing the 1995-1996 Nissan Datsun 2.7DT AX, and this is particularly evident in its fuel efficiency and MPG (Miles Per Gallon) ratings.

Fuel Consumption: The 2.7DT AX is designed to optimize fuel consumption, making it an economical choice for both businesses and individuals. It achieves an impressive fuel consumption rating of approximately 36.7 mpg US (44.1 mpg UK) or 6.4 L/100km in the 60 km/h mode. This fuel efficiency minimizes the cost of operation and reduces the frequency of refueling stops.

Fuel Tank Capacity: Complementing its fuel efficiency is the vehicle's 60-liter fuel tank capacity. This ample capacity allows for extended driving ranges without the need for frequent stops at the fuel station, enhancing its practicality for long journeys and commercial use.

Economical Choice: The 2.7DT AX's ability to cover more miles per gallon of fuel consumed not only reduces operating costs but also contributes to lower environmental impact through reduced emissions. This makes it a responsible and cost-effective choice for those conscious of both financial and ecological considerations.

Versatile Applications: Whether utilized for transporting goods or passengers, the impressive MPG figures of the 1995-1996 Nissan Datsun 2.7DT AX ensure that it can efficiently meet a wide range of transportation needs. It strikes a balance between performance and economy, making it suitable for diverse applications.

In summary, the 1995-1996 Nissan Datsun 2.7DT AX stands out as an economical choice with its commendable fuel efficiency and MPG ratings. Its ability to cover more distance on a single tank of fuel adds to its practicality and makes it a reliable option for those seeking efficiency and cost savings in their vehicle.

Fuel Tank Capacity

The fuel tank capacity of the 1995-1996 Nissan Datsun 2.7DT AX is an important specification that significantly influences its practicality and usability.

Ample Capacity: This commercial van is equipped with a generous 60-liter fuel tank. This capacity allows it to store a substantial amount of fuel, enabling extended driving ranges without the need for frequent refueling stops. Whether used for long-distance transportation or local deliveries, the 2.7DT AX's fuel tank size enhances its efficiency.

Reduced Refueling Frequency: The combination of its commendable fuel tank capacity and fuel-efficient engine translates to reduced refueling frequency. Businesses and individuals can appreciate the convenience of spending less time at the fuel station and more time on the road, improving overall productivity.

Versatile Applications: The 60-liter fuel tank is well-suited to meet the needs of various applications. Whether it's used for transporting cargo, passengers, or a combination of both, the ample fuel capacity ensures that the 2.7DT AX can handle diverse tasks without constant interruptions for refueling.

Cost Efficiency: A larger fuel tank doesn't only mean extended driving ranges but also potential cost savings. By reducing the frequency of fuel stops, the 2.7DT AX contributes to lower operational costs, making it a practical choice for businesses looking to maximize their efficiency and profitability.

In summary, the 1995-1996 Nissan Datsun 2.7DT AX's substantial fuel tank capacity enhances its usability and efficiency. This feature, combined with its fuel-efficient engine, makes it a dependable and cost-effective option for various transportation needs.

Dimensions and Sizes

The dimensions and sizes of the 1995-1996 Nissan Datsun 2.7DT AX are essential factors that influence its practicality and versatility as a commercial van.

Exterior Length: The 2.7DT AX boasts a length of 469 cm (approximately 184.64 inches). This substantial length provides ample space for cargo, making it suitable for businesses that require the transportation of goods.

Exterior Width: With a width of 169 cm (about 66.53 inches), this commercial van strikes a balance between maneuverability on the road and cargo capacity. It can navigate urban streets and highways with ease while accommodating various load sizes.

Exterior Height: Standing at 172.5 cm (approximately 67.91 inches) in height, the 2.7DT AX offers a reasonable vertical clearance. This height allows for the transportation of taller cargo items without compromising stability.

Wheelbase: The van's wheelbase measures 295 cm (around 116.14 inches). This dimension contributes to its stability and handling, especially when carrying heavy loads. A longer wheelbase often translates to smoother rides.

Ground Clearance: The 2.7DT AX features a ground clearance of 20.5 cm (about 8.07 inches). This provides adequate protection from rough road conditions and ensures that the vehicle can handle varying terrains without issues.

Weight: Weighing in at approximately 1760 kg (3880 lbs), this commercial van strikes a balance between payload capacity and stability on the road. Its weight distribution contributes to its overall performance and handling.

Seating and Doors: The 2.7DT AX accommodates up to five passengers with its four-door configuration. This setup enhances accessibility for both passengers and cargo, making it versatile for various transportation needs.

Turning Circle: With a minimum turning circle or turning diameter of 5.9 meters, the 2.7DT AX offers decent maneuverability, which is crucial for navigating tight spaces and city streets.

In summary, the dimensions and sizes of the 1995-1996 Nissan Datsun 2.7DT AX underscore its suitability for diverse commercial applications. Its balance of length, width, height, and other dimensions ensures that it can handle various cargo requirements while maintaining maneuverability and stability on the road.

Wheel Specifications

The wheel specifications of the 1995-1996 Nissan Datsun 2.7DT AX play a pivotal role in determining its handling, traction, and overall performance on the road.

Tire Dimensions: The 2.7DT AX is equipped with tires that measure 215 R15-8PRLT. These tires strike a balance between load-carrying capacity, traction, and stability. The 15-inch rim size provides a suitable platform for these tires.

Aluminium Disk: The vehicle features standard aluminum disks. These aluminum wheels are known for their lightweight nature, which can contribute to improved fuel efficiency and handling. They also add a touch of modern aesthetics to the vehicle's overall appearance.

Traction and Grip: The choice of tires and rims is instrumental in providing the necessary traction and grip on the road. This is especially important for a commercial van like the 2.7DT AX, as it may need to handle varying road conditions and payloads.

Handling and Ride Comfort: The combination of tire dimensions, rims, and suspension design affects the vehicle's handling characteristics and ride comfort. The 2.7DT AX's wheel specifications are designed to strike a balance between load-bearing capability and a smooth, controlled ride.

Durability: Commercial vans often endure heavy use, and the wheel specifications are chosen with durability in mind. The rims and tires are built to withstand the rigors of daily transportation tasks and are chosen to minimize the risk of punctures and other wheel-related issues.

In summary, the wheel specifications of the 1995-1996 Nissan Datsun 2.7DT AX are carefully selected to ensure that the vehicle can handle the demands of commercial use. The choice of tires, rims, and their dimensions contributes to the van's overall performance, traction, and durability on the road.

Trim Levels and Variants

The 1995-1996 Nissan Datsun 2.7DT AX was available in several trim levels and variants, catering to a range of preferences and needs among buyers and businesses.

Standard Trim: The base trim of the 2.7DT AX offered essential features and functionality, making it a cost-effective choice for those primarily focused on utility. It provided the core specifications and performance characteristics that made this van a reliable workhorse.

Upgraded Trims: Depending on the market and region, there were variations in the available trim levels. These higher-level trims often introduced additional comfort and convenience features, such as power windows, power steering, and more advanced audio systems. They aimed to enhance the overall driving experience and cater to different customer preferences.

Cargo and Passenger Variants: The 2.7DT AX was versatile enough to be configured for various purposes. Some variants were tailored for cargo transportation, featuring spacious rear cargo areas with provisions for securing loads. Others were configured for passenger transport, offering seating for up to five occupants while retaining cargo space.

Special Editions: Over the production years, special edition models or packages may have been introduced, featuring unique styling elements or additional equipment. These special editions were designed to provide a distinctive appeal to a particular segment of buyers.

Business-Focused Versions: Given its commercial nature, some versions of the 2.7DT AX were tailored for specific business needs. These variants might have included modifications for specialized industries, such as logistics or delivery services.

Regional Variations: It's worth noting that the availability of trim levels and variants could vary by region and market demand. Nissan often tailored its offerings to meet the specific needs and preferences of different markets.

In summary, the 1995-1996 Nissan Datsun 2.7DT AX was a versatile commercial van available in various trim levels and variants. These options allowed buyers to choose a configuration that best suited their intended use, whether for cargo transportation, passenger transport, or specific business requirements.

Interior and Exterior Features

The 1995-1996 Nissan Datsun 2.7DT AX was equipped with a range of interior and exterior features that contributed to its functionality, comfort, and overall appeal.

Interior Features:

1. Power Windows: The inclusion of power windows offered convenience for both the driver and passengers, allowing for easy control of window operations.

2. Power Steering: Power steering enhanced maneuverability, making it easier to handle the van in various driving conditions.

3. Tachometer: The presence of a tachometer provided real-time engine RPM data, aiding drivers in maintaining optimal engine performance.

4. Centralized Door Lock: Centralized door lock functionality simplified the process of locking and unlocking all doors from a single point, enhancing security and ease of use.

5. Adjustable Steering: An adjustable steering column allowed drivers to customize the steering wheel position for a comfortable driving experience.

Exterior Features:

1. Sunroof Options: While the 2.7DT AX did not feature a sunroof as standard, some variants offered options for tilt sunroofs, providing occupants with an open-air driving experience.

2. Power Adjustable Door Mirrors: Power-adjustable door mirrors allowed for convenient adjustments to improve rear visibility and overall driving safety.

3. Exterior Lighting: The vehicle came equipped with standard front and rear lighting systems, including headlamps, taillights, and turn signals, to ensure visibility on the road.

4. Exterior Dimensions: The 2.7DT AX's exterior dimensions, as previously discussed, played a significant role in its overall design and functionality. Its length, width, and height were balanced to accommodate cargo and passenger needs while ensuring road presence and stability.

5. Exterior Styling: The van's exterior design featured a utilitarian aesthetic, with clean lines and a focus on functionality. It prioritized durability and ease of maintenance, essential for commercial applications.

In summary, the 1995-1996 Nissan Datsun 2.7DT AX offered a combination of interior and exterior features that catered to practicality and comfort. These features, ranging from power accessories to exterior dimensions, were designed to meet the diverse needs of both businesses and individuals who relied on this commercial van for transportation and logistics.

Performance and Handling

The performance and handling characteristics of the 1995-1996 Nissan Datsun 2.7DT AX were tailored to meet the demands of commercial use while ensuring a comfortable driving experience.

Engine Power: The 2.7DT AX was powered by the TD27T engine, delivering around 101.3 PS (100 bhp) at 4000 rpm. This engine provided the necessary power for carrying cargo and passengers, as well as navigating various road conditions.

Torque: With a maximum torque output of approximately 215.7 Nm (159.1 lb.ft) at 2200 rpm, the engine exhibited robust low-end torque. This torque characteristic was valuable for handling heavy loads and ensuring smooth acceleration, especially when climbing inclines.

Transmission: Equipped with a 5-speed manual transmission, the 2.7DT AX provided drivers with control over gear shifts. This manual transmission allowed for precise handling and gear selection to match driving conditions.

Suspension: The van featured a double wishbone torsion bar spring front suspension and a rigid axle with a semicircle leaf spring rear suspension. This combination balanced ride comfort and load-carrying capability, contributing to stable handling.

Turning Circle: With a minimum turning circle or turning diameter of approximately 5.9 meters, the 2.7DT AX exhibited maneuverability suitable for urban and confined spaces, important for navigating busy city streets.

Braking System: The front brakes utilized ventilated discs, while the rear brakes employed leading trailing drum brake technology. This setup offered effective braking performance and control.

4WD Drivetrain: The 2.7DT AX's 4WD (Four-Wheel Drive) drivetrain provided enhanced traction and stability, making it capable of handling diverse terrains and road conditions, including slippery surfaces and uneven terrain.

In summary, the 1995-1996 Nissan Datsun 2.7DT AX was designed with performance and handling in mind, ensuring that it could fulfill its role as a reliable commercial van. Its power, torque, transmission, suspension, and 4WD capability were carefully engineered to provide a balance between performance, load-carrying capacity, and maneuverability, making it well-suited for various transportation needs.

Maintenance and Reliability

Maintenance and reliability are crucial considerations for any commercial vehicle, and the 1995-1996 Nissan Datsun 2.7DT AX was no exception.

Routine Maintenance: Like any vehicle, the 2.7DT AX required regular maintenance to ensure its continued reliability and optimal performance. This included routine oil changes, air filter replacements, brake inspections, and tire rotations. Proper maintenance schedules and adherence to manufacturer recommendations were essential.

Durable Build: Nissan designed the 2.7DT AX with durability in mind. The robust construction of its chassis and body, as well as the choice of materials, contributed to its ability to withstand the demands of commercial use. This durability made it a dependable choice for businesses.

Engine Longevity: The TD27T engine, known for its durability, was a key factor in the vehicle's reliability. Regular servicing and adherence to maintenance intervals helped prolong the engine's lifespan, ensuring consistent performance over the years.

Transmission and Drivetrain: The manual transmission and 4WD drivetrain were engineered for reliability and durability. Proper maintenance of the transmission fluid and drivetrain components was crucial to prevent wear and ensure smooth operation.

Quality Components: Nissan used quality components in the manufacturing of the 2.7DT AX. This included the braking system, suspension components, and steering components. The use of reliable parts contributed to the vehicle's dependability.

Dependable in Commercial Use: The 2.7DT AX's track record in various commercial applications highlighted its reliability. Businesses, including delivery services and logistics companies, often relied on this van for its consistent performance and minimal downtime.

Availability of Parts: The availability of replacement parts and a network of service centers contributed to the vehicle's reliability. Easy access to genuine Nissan parts ensured that maintenance and repairs could be carried out promptly.

In summary, the 1995-1996 Nissan Datsun 2.7DT AX was designed to be a reliable and durable commercial van. Routine maintenance and a focus on quality components were key factors that contributed to its dependability and its ability to withstand the demands of commercial use.

Fuel Consumption in Real-World Conditions

Evaluating the fuel consumption of the 1995-1996 Nissan Datsun 2.7DT AX in real-world conditions is essential for understanding how this commercial van performed in practical situations.

Realistic Usage: While official fuel efficiency figures provide a baseline, real-world driving conditions can vary significantly. The 2.7DT AX's fuel consumption in everyday scenarios depended on factors such as driving habits, load capacity, terrain, and traffic conditions.

Payload Impact: One significant factor affecting fuel consumption was the payload. When fully loaded with cargo or passengers, the van's engine had to work harder, potentially resulting in higher fuel consumption compared to lighter loads.

Terrain and Driving Conditions: Fuel efficiency could also be influenced by the terrain. Driving in hilly or mountainous regions often required more power and, consequently, more fuel. Additionally, stop-and-go city traffic tended to be less fuel-efficient compared to highway driving.

Driver Behavior: Driver habits, such as aggressive acceleration and braking, could impact fuel consumption. Smooth and economical driving practices typically resulted in better fuel efficiency.

Maintenance: The van's fuel efficiency could also be influenced by its maintenance. Regular servicing, including engine tune-ups and proper tire inflation, played a role in ensuring the engine operated efficiently.

Load Distribution: Proper load distribution within the van could also affect fuel consumption. An unevenly distributed load might result in poor weight balance, affecting handling and fuel efficiency.

Real-World Versatility: Despite variations in fuel consumption under different conditions, the 2.7DT AX was designed to provide versatility. Its efficient engine and ample fuel tank capacity allowed it to handle a wide range of real-world situations while maintaining a balance between performance and economy.

In summary, the real-world fuel consumption of the 1995-1996 Nissan Datsun 2.7DT AX could vary based on numerous factors, including load, terrain, driving conditions, and driver behavior. While official figures provided a baseline, actual fuel efficiency was influenced by how the van was used and maintained in everyday scenarios.

Conclusion: Pros and Cons of the 1995-1996 Nissan Datsun 2.7DT AX

Pros of the 1995-1996 Nissan Datsun 2.7DT AX:

1. Reliability: The 2.7DT AX was renowned for its reliability, making it a trusted choice for businesses and individuals requiring a dependable commercial van.

2. Durable Build: Its robust construction and choice of materials ensured that it could withstand the rigors of daily use, including heavy payloads.

3. Engine Efficiency: The TD27T engine, coupled with its fuel-efficient design, struck a balance between power and economy, reducing operational costs.

4. Versatile Configurations: With cargo and passenger variants, the van offered versatility to cater to different transportation needs.

5. 4WD Capability: The 4WD drivetrain provided enhanced traction and stability, making it suitable for diverse terrains and challenging weather conditions.

6. Ample Cargo Space: The van's exterior dimensions and cargo capacity allowed for the transportation of various goods, contributing to its utility.

Cons of the 1995-1996 Nissan Datsun 2.7DT AX:

1. Limited Features: While practical, it lacked some of the modern comfort and convenience features found in contemporary vehicles.

2. Fuel Efficiency Variability: Real-world fuel efficiency could vary based on load, terrain, and driving conditions, potentially leading to higher fuel costs in some scenarios.

3. Aging Design: By the mid-1990s, the design of the 2.7DT AX was becoming dated compared to newer commercial van models.

4. Safety Features: It lacked modern safety features, such as airbags, which are standard in many vehicles today.

5. Maintenance Demands: Like any commercial vehicle, it required consistent maintenance to ensure longevity, which could add to operating costs.

6. Environmental Impact: While it met emissions standards for its time, it may not meet modern environmental expectations in terms of emissions and fuel efficiency.

In conclusion, the 1995-1996 Nissan Datsun 2.7DT AX offered a balance between reliability, durability, and utility. Its pros included its reputation for reliability, versatile configurations, and efficient engine. However, it had limitations in terms of features, fuel efficiency variability, and aging design, which may affect its appeal in a modern context.

Frequently Asked Questions (FAQ) about the 1995-1996 Nissan Datsun 2.7DT AX