1992 Nissan Datsun 2.7DT Ad Specs

OVERVIEW

With a fuel consumption of 34.5 mpg US - 41.5 mpg UK - 6.8 L/100km, a weight of 3858 lbs (1750 kg), the Nissan Datsun 2.7DT Ad has a water cooling 4 cylinder OHV engine, a Light oil engine TD27T. This engine TD27T produces a maximum power of 101.3 PS (100 bhp - 74.5 kW) at 4000 rpm and a maximum torque of 215.7 Nm (159.1 lb.ft - 22 kg.m) at 2200 rpm. The engine power is transmitted to the road by the four wheel drive (4WD) with a 4AT gearbox. For stopping power, the Nissan Datsun 2.7DT Ad braking system includes Leading trailing drum brake at the rear and Ventilated disk at the front. Stock tire sizes are 215 on 15 inch rims -8PRLT at the rear and 215 on 15 inch rims -8PRLT at the front. Chassis details - Nissan Datsun 2.7DT Ad has rigid axle axle type semicircle leaf spring rear suspension and double wishbone torsion bar spring front suspension for road holding and ride confort.

Add to compare list

- Present
- Option
- Not Present (or Dealer Option)

• Search Car Specs
• Other Datsun Specs Database

More photos Nissan Datsun

By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on April 25, 2024

Introduction

The "1992-1995 Nissan Datsun 2.7DT Ad" stands as a notable representative of Nissan's commercial van offerings during that era. With its production spanning from August 1992 to July 1995, this vehicle was designed to cater to the demands of those seeking a reliable and capable commercial van. Let's delve into some of its key features and specifications.

Body Type and Drive System: The 2.7DT Ad is classified as a commercial van, indicating its primary purpose for transporting goods and services. It features a robust 4WD drivetrain, ensuring stability and traction even in challenging driving conditions.

Engine Power: Under the hood, this Nissan Datsun is equipped with a 2663 cm3 engine (engine code: TD27T). It generates a respectable 101.3 PS (100 bhp) of power at 4000 rpm and a torque of 215.7 Nm (159.1 lb.ft) at 2200 rpm. The engine's water-cooled, 4-cylinder OHV design, coupled with a charger, contributes to its reliable performance.

Transmission: The transmission system boasts a 4-speed automatic gearbox (4AT) that enables smooth gear shifting for optimal driving comfort.

Dimensions: Measuring 469 cm (184.64 inches) in length, 169 cm (66.53 inches) in width, and 172.5 cm (67.91 inches) in height, the 2.7DT Ad offers ample space for cargo. Its wheelbase spans 295 cm (116.14 inches), providing stability on the road.

Fuel Efficiency: Fuel efficiency is a crucial factor for commercial vehicles. The 2.7DT Ad achieves a fuel consumption rate of 34.5 mpg US (41.5 mpg UK) or 6.8 L/100km at a speed of 60 km/h, making it cost-effective for long-haul transportation.

Safety: Safety features include standard 3-point safety belts and a durable frame. While it may lack advanced airbags and modern driver assistance systems, it was designed to withstand the rigors of commercial use.

Amenities: In terms of amenities, the 2.7DT Ad offers essential features like power steering and a tachometer. Its interior is designed for practicality, prioritizing functionality over luxury.

Additional Features: Depending on the specific configuration, options like a tilt sunroof, power-adjustable door mirrors, LSD (Limited Slip Differential), and more could be available.

The "1992-1995 Nissan Datsun 2.7DT Ad" caters to the needs of commercial operators, providing a reliable and robust platform for transporting goods and services. Its durability, practicality, and decent fuel efficiency make it a noteworthy choice in its category during its production years.

Model Range

The model range of the "1992-1995 Nissan Datsun 2.7DT Ad" offered a selection of configurations tailored to different commercial needs. During its production years from August 1992 to July 1995, Nissan provided variations of this commercial van to cater to diverse customer requirements.

Diversity in Trim Levels: Nissan understood that commercial operators have unique demands, so they offered different trim levels within the 2.7DT Ad model range. These trim levels provided varying levels of features and options, allowing businesses to choose the configuration that best suited their needs and budget.

4WD Configuration: Across the model range, the 4WD drivetrain was a common feature, ensuring that these vans could handle rough terrains and adverse weather conditions. This feature made the 2.7DT Ad a versatile option for businesses that required off-road capabilities.

Engine Consistency: The engine specifications remained consistent across the model range, with all variants equipped with the same 2663 cm3 engine (engine code: TD27T). This engine delivered a reliable balance of power and efficiency, making it suitable for commercial applications.

Transmission Options: While the model range primarily featured a 4-speed automatic transmission (4AT), some variants may have offered manual transmission options to cater to specific preferences or requirements.

Customization Possibilities: Businesses could further customize their 2.7DT Ad vans to meet their unique needs. This might include options such as cargo area modifications, interior configurations, and additional equipment to enhance functionality.

In summary, the model range of the "1992-1995 Nissan Datsun 2.7DT Ad" was designed to offer versatility to commercial operators. By providing different trim levels and customization options while maintaining a consistent and capable drivetrain, Nissan ensured that businesses could find a suitable solution within this model range for their specific transportation needs.

Trim Levels

The "1992-1995 Nissan Datsun 2.7DT Ad" came with a range of trim levels, each offering specific features and configurations to cater to various customer preferences and needs. These trim levels allowed buyers to select the version of the vehicle that best suited their requirements.

Base Trim: The base trim level of the 2.7DT Ad provided a practical and cost-effective option for businesses. It included essential features for commercial use, such as a spacious cargo area, a durable frame, and the reliable 4WD system.

Mid-Level Trim: Moving up the trim hierarchy, the mid-level trim of the 2.7DT Ad added extra convenience and comfort features. This might have included power steering, power-adjustable door mirrors, and other amenities to enhance the driver's experience.

High-End Trim: The high-end trim level of the 2.7DT Ad was designed for those who sought a more comfortable and well-equipped commercial van. It could have included additional features like a tilt sunroof, centralized door locking, and more.

Customization Options: Beyond the standard trim levels, Nissan likely offered customization options to tailor the 2.7DT Ad to specific business needs. These could have included modifications to the cargo area, interior configurations, and the addition of specialized equipment or accessories.

Drivetrain Consistency: Regardless of the trim level, all variants of the 2.7DT Ad featured a 4WD drivetrain. This consistent drivetrain ensured that every model in the range could handle various road conditions and terrains.

Engine Uniformity: The engine specifications remained the same across all trim levels, with a 2663 cm3 engine (engine code: TD27T) providing power and efficiency for these commercial vans.

In essence, the trim levels of the "1992-1995 Nissan Datsun 2.7DT Ad" allowed customers to choose the level of comfort and convenience that suited their business requirements. Whether it was the basic yet rugged base trim, the mid-level option with added features, or the high-end version for more comfort, Nissan aimed to accommodate a range of preferences within its model lineup.

Generations

The "1992-1995 Nissan Datsun 2.7DT Ad" did not undergo significant generational changes during its production years. Instead, it represented a consistent model within Nissan's commercial van lineup during this period.

Continuous Production: Nissan maintained a stable and consistent design and engineering approach throughout the 2.7DT Ad's production from August 1992 to July 1995. This continuity in design and specifications ensured that customers knew what to expect from the vehicle.

Design and Features: The design, features, and overall appearance of the 2.7DT Ad remained relatively unchanged throughout its production. This was in line with the vehicle's purpose as a practical and reliable commercial van, where consistency was often preferred by businesses.

Engine and Drivetrain: The engine specifications, including the 2663 cm3 engine (engine code: TD27T) and 4WD drivetrain, remained consistent across the entire production period. Nissan maintained this uniformity to provide reliability and ease of maintenance for businesses relying on the 2.7DT Ad.

Trim Levels and Customization: Nissan did offer a range of trim levels and customization options within the 2.7DT Ad lineup, allowing businesses to select the version that best suited their specific needs. However, these options did not represent distinct generational changes but rather variations within the model range.

In summary, the "1992-1995 Nissan Datsun 2.7DT Ad" did not go through distinct generations during its production years. Instead, it offered consistency in design, features, and specifications, catering to the demands of commercial operators seeking a reliable and stable platform for their transportation needs.

Engine Types

The "1992-1995 Nissan Datsun 2.7DT Ad" was equipped with a specific engine type that was consistent throughout its production years. This engine type played a crucial role in defining the vehicle's performance, efficiency, and overall capabilities.

Engine Type: The engine utilized in the 2.7DT Ad was a 2663 cm3 (cubic centimeters) powerplant with the engine code TD27T. This engine type was known for its reliability and suitability for commercial applications.

Cylinder Configuration: The engine featured a 4-cylinder configuration. This design, combined with its OHV (Overhead Valve) layout, contributed to its robust performance and durability.

Cooling System: The engine employed a water-cooling system, which was effective in maintaining optimal operating temperatures even during prolonged periods of use.

Forced Induction: One notable feature of this engine type was the presence of a charger, which enhanced its power output. This additional component provided the necessary boost in performance for a commercial vehicle.

Fuel Type: The engine ran on light oil, making it well-suited for the demands of commercial transportation, where efficiency and reliability were paramount.

Performance Metrics: The engine delivered a maximum power output of 101.3 PS (100 bhp or 74.5 kW) at 4000 rpm. Its torque output was equally impressive, producing 215.7 Nm (159.1 lb.ft or 22 kg.m) at 2200 rpm. These performance metrics ensured that the 2.7DT Ad had the necessary power to handle various loads and road conditions.

In summary, the "1992-1995 Nissan Datsun 2.7DT Ad" was equipped with a robust and reliable engine type, the TD27T. This engine, with its 4-cylinder OHV design, charger, and efficient cooling system, provided the vehicle with the necessary power and performance characteristics to excel in its role as a commercial van.

Engine Specifications

The engine specifications of the "1992-1995 Nissan Datsun 2.7DT Ad" are integral to understanding its performance capabilities and suitability for various commercial applications. Let's delve into the specifics of this engine.

Displacement: The engine boasted a displacement of 2663 cm3 (cubic centimeters), indicating the total volume capacity of its combustion chambers. This displacement size contributed to the engine's ability to deliver a balance of power and efficiency.

Cylinder Configuration: The engine featured a 4-cylinder configuration, which is known for its reliability and efficiency. This layout allowed for a compact design while maintaining the necessary power output for commercial use.

Valvetrain: The engine was equipped with an OHV (Overhead Valve) valvetrain. OHV engines are known for their simplicity and durability, making them well-suited for heavy-duty applications.

Forced Induction: One notable aspect of this engine was its forced induction system, indicated by the presence of a charger. Forced induction improves engine performance by compressing air before it enters the combustion chambers, resulting in increased power output.

Maximum Power: The engine generated a maximum power output of 101.3 PS (100 bhp or 74.5 kW) at 4000 rpm. This power output was sufficient for the demands of commercial transportation, ensuring that the 2.7DT Ad could handle various loads and road conditions effectively.

Maximum Torque: The engine delivered a maximum torque of 215.7 Nm (159.1 lb.ft or 22 kg.m) at 2200 rpm. Torque is essential for tasks such as hauling cargo and navigating challenging terrains, making this engine well-suited for its intended purpose.

Fuel Type: The engine operated on light oil, which is a common choice for commercial vehicles due to its efficiency and availability.

In summary, the engine specifications of the "1992-1995 Nissan Datsun 2.7DT Ad" reflected a design that prioritized reliability, efficiency, and performance. With its 4-cylinder OHV layout, forced induction system, and balanced power and torque figures, this engine played a pivotal role in the vehicle's ability to meet the demands of commercial operators during its production years.

Fuel Tank Capacity

The fuel tank capacity of the "1992-1995 Nissan Datsun 2.7DT Ad" is a vital specification, particularly for commercial vehicles that often cover long distances and carry heavy loads. This capacity determines the vehicle's range and how frequently it needs refueling.

Fuel Tank Capacity: The 2.7DT Ad was equipped with a fuel tank capable of holding approximately 15.8 US gallons, which is equivalent to approximately 13.1 UK gallons or 60 liters of fuel.

Importance of Capacity: For commercial operators, having a sizable fuel tank capacity was advantageous as it allowed for extended periods between refueling stops. This feature was especially beneficial for long-haul transportation, reducing downtime and increasing overall efficiency.

Balancing Range and Payload: The 2.7DT Ad's fuel tank capacity was designed to strike a balance between providing a reasonable driving range and preserving payload capacity. Commercial vans need to carry substantial loads, so maximizing payload while ensuring sufficient fuel for the journey was crucial.

Fuel Efficiency: The fuel tank capacity worked in conjunction with the vehicle's fuel efficiency. With a reported fuel consumption rate of 34.5 mpg US (41.5 mpg UK) or 6.8 L/100km at a speed of 60 km/h, the 2.7DT Ad demonstrated efficiency that complemented its tank size.

Practicality for Business: The combination of a reasonable fuel tank capacity and fuel efficiency made the 2.7DT Ad a practical choice for businesses. It allowed operators to plan longer routes with fewer stops, contributing to cost savings and improved logistics.

In summary, the "1992-1995 Nissan Datsun 2.7DT Ad" offered a fuel tank capacity of approximately 15.8 US gallons (13.1 UK gallons or 60 liters), a specification that played a pivotal role in meeting the needs of commercial operators seeking both range and payload capacity.

Fuel Consumption

Fuel consumption is a critical aspect of any vehicle, and the "1992-1995 Nissan Datsun 2.7DT Ad" was no exception. Understanding how efficiently a vehicle utilizes fuel is essential, especially for commercial purposes. Here, we explore the fuel consumption characteristics of this particular commercial van.

Fuel Efficiency: The 2.7DT Ad demonstrated commendable fuel efficiency, making it a cost-effective choice for businesses. At a speed of 60 km/h (37 mph), it achieved a fuel consumption rate of approximately 34.5 mpg US (41.5 mpg UK) or 6.8 L/100km. This figure indicates the amount of fuel the vehicle consumed over a specific distance and speed.

Importance for Commercial Use: Commercial vehicles like the 2.7DT Ad are often tasked with covering substantial distances, carrying goods, and making multiple stops. Fuel efficiency is a critical factor in determining operational costs. A more fuel-efficient vehicle not only reduces fuel expenses but also minimizes environmental impact.

Cost Savings: The 2.7DT Ad's fuel efficiency translated into cost savings for businesses over the long haul. Operators could expect reduced fuel expenses, ultimately contributing to improved profitability.

Balancing Power and Efficiency: The vehicle's engine, with its power output and torque, struck a balance between performance and fuel economy. This equilibrium allowed the 2.7DT Ad to handle the demands of commercial use while maintaining respectable fuel efficiency.

Considerations for Operators: While fuel efficiency was a highlight of the 2.7DT Ad, operators needed to consider other factors such as cargo weight, driving conditions, and maintenance practices, as these could influence actual fuel consumption.

In summary, the "1992-1995 Nissan Datsun 2.7DT Ad" offered commendable fuel efficiency, making it a practical and cost-effective choice for businesses in need of a reliable commercial van. Its ability to balance power and economy contributed to its popularity among commercial operators during its production years.

Fuel Capacity

Fuel capacity is a crucial specification for any vehicle, and the "1992-1995 Nissan Datsun 2.7DT Ad" was no exception. It played a significant role in determining the vehicle's range and how frequently it needed refueling.

Fuel Tank Capacity: The 2.7DT Ad was equipped with a fuel tank that could hold approximately 15.8 US gallons, equivalent to approximately 13.1 UK gallons or 60 liters of fuel. This capacity determined the amount of fuel the vehicle could carry at full tank.

Balancing Payload and Range: Commercial vehicles like the 2.7DT Ad needed to strike a balance between carrying capacity and range. A larger fuel tank capacity allowed for longer journeys between refueling stops, which was essential for businesses that needed to cover substantial distances.

Long-Haul Capabilities: The 2.7DT Ad's fuel capacity made it suitable for long-haul transportation, reducing downtime caused by frequent refueling. This was particularly advantageous for businesses engaged in logistics or transportation services.

Efficiency and Fuel Consumption: The vehicle's fuel capacity worked in tandem with its fuel efficiency. The reported fuel consumption rate of approximately 34.5 mpg US (41.5 mpg UK) or 6.8 L/100km at a speed of 60 km/h ensured that the fuel tank capacity was effectively utilized, contributing to cost savings.

Practicality for Business: The combination of a reasonable fuel tank capacity and fuel efficiency made the 2.7DT Ad a practical choice for businesses. It allowed operators to plan longer routes with fewer stops, reducing operational costs and increasing efficiency.

In summary, the "1992-1995 Nissan Datsun 2.7DT Ad" featured a fuel tank capacity of approximately 15.8 US gallons (13.1 UK gallons or 60 liters), a specification that played a vital role in its suitability for commercial purposes. The balance between fuel capacity and efficiency made it an attractive option for businesses seeking reliable and cost-effective transportation solutions.

Fuel Average (MPG)

Fuel average, often measured in miles per gallon (MPG), is a crucial metric when assessing the efficiency and cost-effectiveness of a vehicle like the "1992-1995 Nissan Datsun 2.7DT Ad." It provides valuable information about how efficiently the vehicle utilizes fuel.

Efficiency Rating: The 2.7DT Ad was known for its commendable fuel efficiency, a key factor that made it an attractive choice for commercial operators. At a speed of 60 km/h (37 mph), it achieved a fuel consumption rate of approximately 34.5 mpg US (41.5 mpg UK) or 6.8 L/100km.

Cost Savings: The vehicle's efficient fuel consumption translated into cost savings for businesses. It meant that operators could cover more distance with less fuel, reducing their overall fuel expenses and improving the cost-effectiveness of their operations.

Long-Haul Capabilities: Commercial vehicles often need to cover long distances, and the 2.7DT Ad's fuel efficiency made it well-suited for such tasks. Businesses engaged in logistics, transportation, or delivery services could benefit from its ability to reduce refueling stops during extended journeys.

Environmental Impact: Fuel-efficient vehicles also have a reduced environmental footprint, emitting fewer greenhouse gases and pollutants per mile traveled. This aspect was increasingly important in an era where environmental concerns were growing.

Practicality for Business: The 2.7DT Ad's fuel efficiency, in combination with its other specifications, made it a practical choice for businesses. It allowed operators to optimize their routes, minimize downtime for refueling, and ultimately enhance their operational efficiency.

In summary, the "1992-1995 Nissan Datsun 2.7DT Ad" offered impressive fuel efficiency, as evidenced by its fuel average of approximately 34.5 mpg US (41.5 mpg UK) or 6.8 L/100km at a speed of 60 km/h. This efficiency contributed significantly to its appeal as a cost-effective and reliable commercial vehicle for a wide range of businesses.

Dimensions and Sizes

Understanding the dimensions and sizes of the "1992-1995 Nissan Datsun 2.7DT Ad" is crucial for both practicality and maneuverability, especially in the context of commercial transportation. Here, we explore the vehicle's key dimensions and sizes:

Exterior Length: The 2.7DT Ad boasted an exterior length of approximately 469 cm (184.64 inches). This generous length provided ample space for cargo and allowed businesses to transport goods efficiently.

Exterior Width: With an exterior width of about 169 cm (66.53 inches), the vehicle struck a balance between cargo capacity and maneuverability. It could navigate through urban areas and tight spaces while still accommodating substantial loads.

Exterior Height: The 2.7DT Ad had an exterior height of around 172.5 cm (67.91 inches), ensuring that it could fit under bridges and into spaces with limited vertical clearance.

Wheelbase: Its wheelbase measured approximately 295 cm (116.14 inches). A longer wheelbase contributed to stability on the road, especially when carrying heavy loads.

Front and Rear Axle Length: The front axle had a length of about 142.5 cm (56.1 inches), while the rear axle measured around 141 cm (55.51 inches). These measurements played a role in determining the vehicle's weight distribution, which was essential for safe and stable operation.

Ride Height - Ground Clearance: The 2.7DT Ad featured a ride height or ground clearance of about 20.5 cm (8.07 inches). This clearance allowed it to handle various road conditions and minor obstacles without scraping the undercarriage.

Weight: The vehicle had a weight of approximately 1750 kg (3858 lbs). This weight included both the vehicle itself and any cargo or passengers it carried.

Number of Seats: The 2.7DT Ad could accommodate up to five passengers, making it suitable for both transporting goods and carrying a small crew.

Number of Doors: It featured four doors, providing convenient access to both the front and rear compartments.

Turning Circle - Turning Diameter: The vehicle had a minimum turning circle or turning diameter of approximately 5.9 meters (about 19.36 feet). This specification was essential for maneuvering in confined spaces, such as parking lots or narrow streets.

In summary, the dimensions and sizes of the "1992-1995 Nissan Datsun 2.7DT Ad" were carefully designed to balance cargo capacity, maneuverability, and practicality. These specifications made it a versatile choice for businesses requiring reliable transportation for both goods and personnel during its production years.

Wheel Options

The "1992-1995 Nissan Datsun 2.7DT Ad" came with specific wheel options that played a role in determining the vehicle's handling, stability, and overall performance. These wheel choices were essential for meeting various transportation needs:

Front and Rear Tire Dimensions: The standard tire dimensions for both the front and rear wheels were 215 R15-8PRLT. These tires provided a balance between load-bearing capacity and road grip, ensuring that the 2.7DT Ad could handle varying loads and road conditions effectively.

Aluminium Disk: The vehicle featured standard aluminum disks. Aluminum wheels are known for their lightweight nature and durability, contributing to improved fuel efficiency and overall performance.

Importance of Wheel Options: The choice of wheels was critical for a commercial van like the 2.7DT Ad. It impacted factors such as ride comfort, stability, and the ability to handle different road surfaces and weather conditions.

Practicality and Durability: The wheel options were selected to align with the practicality and durability requirements of a commercial vehicle. They were designed to withstand the demands of transporting goods and passengers, often over long distances and varied terrain.

Uniformity Across Trim Levels: The consistent choice of wheel options across different trim levels ensured that the vehicle's performance characteristics remained predictable and stable. This uniformity was valuable for businesses that relied on multiple units of the 2.7DT Ad within their fleet.

In summary, the "1992-1995 Nissan Datsun 2.7DT Ad" featured standard wheel options designed to meet the practical and performance needs of a commercial van. The choice of tire dimensions and aluminum wheels contributed to its ability to handle various loads and road conditions efficiently during its production years.

Performance Metrics

Evaluating the performance metrics of the "1992-1995 Nissan Datsun 2.7DT Ad" is essential for understanding how well the vehicle could handle various tasks and road conditions. These metrics provide insights into its power, acceleration, and overall capabilities:

Maximum Power Output: The 2.7DT Ad was equipped with an engine that could deliver a maximum power output of approximately 101.3 PS (100 bhp or 74.5 kW) at 4000 rpm. This power output was sufficient for its role as a commercial van, providing the necessary performance for hauling cargo and navigating diverse terrains.

Maximum Torque: The vehicle generated a maximum torque of approximately 215.7 Nm (159.1 lb.ft or 22 kg.m) at 2200 rpm. Torque is crucial for tasks like accelerating with a heavy load and climbing steep inclines, making this metric important for the 2.7DT Ad's utility.

Engine Type: The 2.7DT Ad featured a 4-cylinder OHV (Overhead Valve) engine with forced induction, known for its reliability and efficiency in commercial applications. The presence of a charger further enhanced its performance capabilities.

Transmission: The van was equipped with a 4-speed automatic transmission (4AT), providing smooth and efficient gear changes, which were essential for maintaining momentum and fuel efficiency during long drives.

Fuel Efficiency: The 2.7DT Ad's fuel consumption rate of approximately 34.5 mpg US (41.5 mpg UK) or 6.8 L/100km at a speed of 60 km/h demonstrated its ability to balance power with fuel economy, ensuring cost-effective operation.

Turning Circle: With a minimum turning circle or turning diameter of approximately 5.9 meters (about 19.36 feet), the van displayed maneuverability that was suitable for urban driving and navigating confined spaces.

Suspension and Braking: The front suspension featured a double wishbone torsion bar spring setup, while the rear suspension utilized a rigid axle with semicircle leaf springs. Front ventilated disk brakes and rear leading-trailing drum brakes provided reliable stopping power.

In summary, the "1992-1995 Nissan Datsun 2.7DT Ad" offered performance metrics that were tailored to the demands of commercial use. Its power, torque, fuel efficiency, and handling characteristics ensured that it could effectively handle a range of tasks, making it a versatile choice for businesses during its production years.

Notable Features

The "1992-1995 Nissan Datsun 2.7DT Ad" boasted several notable features that contributed to its appeal as a reliable and practical commercial van. These features were designed to enhance performance, convenience, and safety:

4WD Drivetrain: One of the standout features of the 2.7DT Ad was its 4WD (Four-Wheel Drive) drivetrain. This drivetrain configuration provided improved traction and stability, making it suitable for handling diverse road conditions, including challenging terrains and adverse weather.

Commercial Van Design: The vehicle's body type was that of a commercial van, emphasizing its utilitarian purpose. This design allowed for maximum cargo space and flexibility, making it an ideal choice for businesses involved in transportation and logistics.

4-Speed Automatic Transmission: The 2.7DT Ad was equipped with a 4-speed automatic transmission (4AT), offering smooth and efficient gear changes. This automatic transmission simplified driving, especially in stop-and-go traffic, and contributed to a comfortable driving experience.

Engine with Forced Induction: The engine, with its forced induction system, played a pivotal role in delivering reliable power and torque. The presence of a charger enhanced the engine's performance, making it capable of handling the demands of commercial use.

Fuel Efficiency: Notably, the vehicle offered impressive fuel efficiency, with a reported fuel consumption rate of approximately 34.5 mpg US (41.5 mpg UK) or 6.8 L/100km at a speed of 60 km/h. This level of fuel efficiency was advantageous for businesses looking to minimize operational costs.

Ample Cargo Space: The 2.7DT Ad's interior design prioritized cargo space, allowing it to accommodate a significant load. This feature was vital for businesses involved in transporting goods, as it maximized their cargo-carrying capacity.

Safety Features: While lacking modern safety technologies like airbags, the 2.7DT Ad featured a durable frame, safety belt pretensioners, safety belt limiters, and 3-point safety belts, enhancing safety for occupants and cargo during transportation.

Standard Aluminum Wheels: The vehicle came equipped with standard aluminum wheels. These wheels offered a balance between durability and weight, contributing to fuel efficiency and overall performance.

In summary, the "1992-1995 Nissan Datsun 2.7DT Ad" showcased a range of notable features that catered to the practical needs of commercial operators. Its 4WD capability, cargo-friendly design, fuel efficiency, and safety features made it a reliable and efficient choice for businesses during its production years.

Conclusion

In conclusion, the "1992-1995 Nissan Datsun 2.7DT Ad" was a commercial van that left a lasting impression during its production years. It was designed to meet the practical needs of businesses engaged in transportation, logistics, and delivery services. Several key factors and features contributed to its popularity and reputation:

Versatility: The 2.7DT Ad's versatility made it suitable for a wide range of applications. Its cargo-friendly design, ample cargo space, and 4WD drivetrain allowed it to adapt to various tasks and terrains, making it a dependable choice for businesses.

Efficiency: Fuel efficiency was a standout feature of the vehicle. Its commendable fuel consumption rate, coupled with a sizable fuel tank capacity, enabled businesses to reduce operational costs and optimize their routes.

Performance: Equipped with a capable engine and transmission, the 2.7DT Ad offered a balance between power and efficiency. It could handle heavy loads, challenging road conditions, and long journeys with ease.

Safety: While lacking modern safety technologies, the vehicle incorporated safety features such as a durable frame, safety belts, and a 3-point safety belt system. These elements contributed to occupant and cargo safety.

Reliability: The 2.7DT Ad was known for its reliability and durability, factors that businesses highly valued. Its robust construction and practical design ensured that it could withstand the demands of commercial use.

Cost-Effectiveness: The vehicle's cost-effectiveness was a key consideration for businesses looking to maximize their profits. Its efficient fuel consumption and low maintenance requirements contributed to its overall affordability.

Overall, the "1992-1995 Nissan Datsun 2.7DT Ad" proved to be a practical and reliable workhorse for businesses during its production period. Its combination of versatility, efficiency, and performance made it a favored choice for those seeking a dependable commercial van for their daily operations.

FAQ: Answers to Common Questions About the 1992-1995 Nissan Datsun 2.7DT Ad