1992 Nissan Datsun 2.7D DX Specs

OVERVIEW

With a fuel consumption of 38.5 mpg US - 46.3 mpg UK - 6.1 L/100km, a weight of 3505 lbs (1590 kg), the Nissan Datsun 2.7D DX has a water cooling 4 cylinder OHV engine, a Light oil engine TD27. This engine TD27 produces a maximum power of 86.1 PS (85 bhp - 63.3 kW) at 4300 rpm and a maximum torque of 176.5 Nm (130.1 lb.ft - 18 kg.m) at 2200 rpm. The engine power is transmitted to the road by the four wheel drive (4WD) with a 5MT gearbox. For stopping power, the Nissan Datsun 2.7D DX braking system includes Leading trailing drum brake at the rear and Ventilated disk at the front. Stock tire sizes are 215 on 15 inch rims -8PRLT at the rear and 215 on 15 inch rims -8PRLT at the front. Chassis details - Nissan Datsun 2.7D DX has rigid axle axle type semicircle leaf spring rear suspension and double wishbone torsion bar spring front suspension for road holding and ride confort.

Add to compare list

- Present
- Option
- Not Present (or Dealer Option)

• Search Car Specs
• Other Datsun Specs Database

More photos Nissan Datsun

By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on April 16, 2024

Introduction

The "1992-1995 Nissan Datsun 2.7D DX" holds a distinctive place in the realm of commercial vans during its production span from August 1992 to July 1995. As part of the revered Datsun lineup, this model has garnered attention for its robust performance and utilitarian design.

During these years, the 2.7D DX showcased Nissan's commitment to quality engineering and durability. Its 4WD traction system ensured dependable performance across various terrains, catering to professionals and businesses requiring a reliable workhorse. The vehicle's body type, classified as a commercial van, showcased its versatility for cargo and transportation needs.

Equipped with a 5-speed manual transmission, the 2.7D DX boasted precise control over its 2663 cm3 engine. This powerplant, denoted by the engine code TD27, produced an impressive 85 bhp, making it adept for hauling tasks. The model's engine performance combined with its solid construction formed a foundation for its popularity in the market.

The dimensions of the 2.7D DX further reinforced its practicality. With an exterior length of 469 cm, width of 169 cm, and height of 171 cm, it provided ample space without being unwieldy. The wheelbase of 295 cm contributed to stability during operation. The ride height of 22 cm and a weight of 1590 kg complemented its robust design, reflecting its durability.

The interior of the 2.7D DX offered functional amenities, aligning with its commercial purpose. Power steering provided ease of maneuverability, while a tilt steering option catered to driver comfort. Essential safety features like side impact bars and child car restraints were standard, showcasing Nissan's commitment to occupant protection.

This model featured an array of features catering to diverse needs. While it lacked some high-end elements like automatic air conditioning and leather seats, its standard radio, cassette player, and CD player offered entertainment on the go. The inclusion of optional features like a Limited Slip Differential (LSD) and front stabilizer added to its appeal.

The "1992-1995 Nissan Datsun 2.7D DX" made its mark as a reliable commercial van, combining practicality and performance. Its enduring legacy lies in its capability to serve various industries, making it a notable presence during its production years.

Model Years

The "1992-1995 Nissan Datsun 2.7D DX" graced the automotive landscape during the span from 1992 to 1995. This period marked an era of innovation and refinement for Nissan's Datsun lineup. The model's production was initiated in August 1992, carrying forth until July 1995.

These years witnessed the evolution of the 2.7D DX, showcasing Nissan's dedication to quality and performance. The model's presence during this time frame allowed it to establish itself as a notable player in the realm of commercial vans. Its inclusion in Nissan's lineup contributed to the brand's reputation for producing dependable and versatile vehicles.

The years from 1992 to 1995 were marked by shifts in automotive design and technology, and the 2.7D DX seamlessly adapted to these changes. Its enduring presence throughout this period is a testament to its enduring design and engineering excellence. As the automotive landscape evolved, the 2.7D DX maintained its position as a reliable choice for businesses and professionals seeking a capable commercial vehicle.

In summary, the "1992-1995 Nissan Datsun 2.7D DX" model years reflect an era of innovation and dependability. Its production span from 1992 to 1995 allowed it to adapt to the changing automotive landscape while remaining steadfast in its purpose as a commercial workhorse.

Generations

The "1992-1995 Nissan Datsun 2.7D DX" represents a singular generation within the Datsun lineup. This specific generation, characterized by its production years spanning from 1992 to 1995, embodies the essence of reliability and utility that Datsun has long been associated with.

During this generation, Nissan focused on refining the 2.7D DX's performance, design, and functionality. The model's design elements and features were tailored to meet the needs of commercial applications, offering a sturdy and practical vehicle for a range of industries. As the automotive landscape evolved, the 2.7D DX remained steadfast in its purpose, serving as a reliable choice for professionals seeking a robust and dependable workhorse.

Throughout its generation, the 2.7D DX continued to showcase Nissan's commitment to innovation and engineering excellence. While the generation's primary focus remained on reliability and utilitarian features, the model benefited from advancements in automotive technology, resulting in enhanced performance, safety features, and overall efficiency.

In essence, the "1992-1995 Nissan Datsun 2.7D DX" represents a distinctive generation within the Datsun lineage. This generation's production years mark a period of evolution and refinement, where Nissan's dedication to quality and functionality is evident in every aspect of the vehicle's design and performance.

Engine Specifications

The "1992-1995 Nissan Datsun 2.7D DX" boasts a formidable engine that aligns with its reputation for dependability and performance. Powering this commercial van is the robust TD27 engine, which has become synonymous with reliability and efficiency.

The TD27 engine, with a displacement of 2663 cm3, is a water-cooled, 4-cylinder, overhead valve (OHV) powerplant. This design reflects a balance between durability and performance, making it well-suited for the demands of commercial applications. Its engineering, combined with the 5-speed manual transmission, ensures precise control over the vehicle's power delivery.

With a maximum power output of 85 bhp (86.1 PS) and a torque of 130.1 lb.ft (176.5 Nm), the TD27 engine provides ample power for hauling and transportation tasks. The engine's torque is available at 2200 rpm, contributing to the model's ability to tackle a range of driving conditions.

The TD27 engine's design also reflects its fuel efficiency, making it an economical choice for businesses. Its fuel consumption of 38.5 mpg (US) or 46.3 mpg (UK) in the 60 km/h mode showcases its efficiency, allowing owners to optimize fuel costs while maintaining performance.

In conclusion, the engine specifications of the "1992-1995 Nissan Datsun 2.7D DX" demonstrate a harmonious balance between power, efficiency, and dependability. The TD27 engine's engineering excellence aligns with the model's reputation as a reliable and versatile commercial van.

Engine Performance

The "1992-1995 Nissan Datsun 2.7D DX" excels in engine performance, delivering a blend of power and reliability crucial for demanding commercial use. At its heart lies the TD27 engine, a testament to Nissan's dedication to engineering excellence.

This engine exhibits its prowess through a power output of 85 bhp, or 86.1 PS, enabling the 2.7D DX to navigate various terrains with confidence. The engine's torque of 130.1 lb.ft (176.5 Nm) at 2200 rpm ensures optimal performance for both laden and unladen conditions.

The model's 5-speed manual transmission offers precise control over the engine's power delivery, enhancing the driver's ability to harness its potential. The gear ratios, ranging from the initial acceleration in 1st gear to the efficient cruising capabilities in higher gears, cater to different driving scenarios.

The 2.7D DX's engine showcases a compression ratio of 22, reflecting its efficiency in converting fuel into power. This characteristic, coupled with its fuel consumption rate of 38.5 mpg (US) or 46.3 mpg (UK) at 60 km/h, underlines the model's commitment to cost-effective operation.

In essence, the "1992-1995 Nissan Datsun 2.7D DX" demonstrates engine performance that marries power, efficiency, and reliability. The TD27 engine's capabilities align with the model's enduring reputation as a dependable workhorse for various professional needs.

Fuel Efficiency

The "1992-1995 Nissan Datsun 2.7D DX" stands out for its commendable fuel efficiency, a trait that aligns perfectly with its utilitarian nature. This commercial van is equipped with the TD27 engine, which showcases a balance between power and economical operation.

One of the standout features of the 2.7D DX's fuel efficiency is its impressive fuel consumption rate of 38.5 mpg (US) or 46.3 mpg (UK) in the 60 km/h mode. This efficiency not only translates into cost savings for businesses but also contributes to reduced environmental impact.

The engine's design, with a compression ratio of 22, plays a pivotal role in optimizing fuel usage. This ratio allows for efficient combustion, ensuring that fuel is utilized to its fullest potential, resulting in both performance and economy.

The 2.7D DX's manual transmission and well-calibrated gear ratios also contribute to its fuel-efficient nature. The harmonious relationship between engine power and transmission ratios ensures that the vehicle operates efficiently across various driving conditions.

In summary, the "1992-1995 Nissan Datsun 2.7D DX" excels in fuel efficiency, making it an economical choice for businesses and professionals. Its balance of power and efficient fuel consumption cements its position as a practical and cost-effective solution for commercial applications.

Fuel Tank Capacity

The "1992-1995 Nissan Datsun 2.7D DX" offers practicality in every aspect, including its fuel tank capacity. Designed to optimize its utility for commercial applications, this model comes equipped with a fuel tank capable of holding 15.8 US gallons (13.1 UK gallons or 60 liters) of fuel.

This fuel tank capacity strikes a balance between the vehicle's fuel efficiency and its range, catering to businesses that require extended operation without frequent refueling stops. The ample fuel storage enables the 2.7D DX to cover significant distances before needing to visit a fuel station, enhancing its productivity.

The model's fuel tank capacity aligns with its overall purpose as a reliable workhorse, serving industries that rely on continuous and efficient transportation. Combined with the vehicle's commendable fuel efficiency, this capacity underscores the 2.7D DX's suitability for various professional needs.

In conclusion, the "1992-1995 Nissan Datsun 2.7D DX" offers a substantial fuel tank capacity that complements its practical design and efficient operation. This capacity enhances its ability to serve as a dependable commercial van, meeting the demands of businesses that prioritize endurance and productivity.

Dimensions and Sizes

The "1992-1995 Nissan Datsun 2.7D DX" is designed with dimensions that strike a balance between practicality and maneuverability. These measurements contribute to its versatility as a commercial van, ensuring it can navigate various environments and meet the demands of businesses.

With an exterior length of 469 cm (184.64 inches), the 2.7D DX offers ample cargo space while maintaining a manageable footprint. The exterior width of 169 cm (66.53 inches) allows for efficient navigation in urban settings and tight spaces.

The vehicle's exterior height of 171 cm (67.32 inches) complements its overall dimensions, providing a comfortable cabin while ensuring it can access low-clearance areas when needed. The wheelbase of 295 cm (116.14 inches) contributes to stability during operation, enhancing the driving experience.

Front and rear axle lengths of 142.5 cm (56.1 inches) and 138.5 cm (54.52 inches) respectively, reflect a well-proportioned design that optimizes weight distribution for a balanced ride. The model's ride height of 22 cm (8.66 inches) strikes a balance between ground clearance and stability.

The 2.7D DX's weight of 1590 kg (3505 lbs) adds to its stability while accommodating cargo and passengers. The model's seating capacity of two and two doors cater to its commercial application, focusing on functionality.

The vehicle's dimensions and sizes are carefully calibrated to make the "1992-1995 Nissan Datsun 2.7D DX" a versatile and capable commercial van. These measurements enable it to excel in various settings, from city streets to off-road environments, while delivering on its promise of durability and utility.

Wheel Configuration

The "1992-1995 Nissan Datsun 2.7D DX" showcases a thoughtfully designed wheel configuration that contributes to its performance and stability. This configuration ensures the model is well-equipped to handle various driving conditions, catering to the needs of businesses and professionals.

The model's front axle length of 142.5 cm (56.1 inches) and rear axle length of 138.5 cm (54.52 inches) play a crucial role in weight distribution and stability. This balanced distribution enhances the vehicle's maneuverability and responsiveness, particularly in challenging terrains.

The choice of front and rear tires, both sized at 215 R15-8PRLT, underscores the focus on robustness and grip. This tire configuration provides traction across different surfaces, ensuring that the 2.7D DX can navigate varying road conditions with confidence.

Aluminum disk options add a touch of customization to the wheel configuration. This choice complements the model's utilitarian design while offering durability and functionality, aligning with its intended commercial use.

The wheel configuration of the "1992-1995 Nissan Datsun 2.7D DX" reflects a harmonious integration of design and function. Its careful calibration contributes to stability, traction, and overall driving experience, making it a dependable choice for businesses seeking a reliable workhorse.

Conclusion

The "1992-1995 Nissan Datsun 2.7D DX" encapsulates a legacy of reliability, utility, and practicality. With a focus on robust performance, fuel efficiency, and well-considered dimensions, this commercial van meets the demands of various industries.

This model's unique blend of engine power, fuel efficiency, and cargo capacity makes it a versatile choice for businesses seeking a dependable workhorse. The TD27 engine's performance, coupled with a 5-speed manual transmission, ensures precise control and adaptable driving experiences.

The carefully considered dimensions, wheel configuration, and weight distribution further enhance its capability to navigate diverse terrains and challenging scenarios. These attributes contribute to a well-rounded vehicle that balances stability with maneuverability.

The 2.7D DX's interior and exterior features, although tailored for functionality, cater to essential comfort and safety needs. Its safety features, including side impact bars and child car restraints, showcase a commitment to occupant protection.

In summary, the "1992-1995 Nissan Datsun 2.7D DX" embodies the brand's dedication to creating dependable, durable, and versatile vehicles. Its enduring legacy lies in its ability to cater to professionals and businesses seeking a robust, efficient, and practical solution for their transportation needs.

Frequently Asked Questions (FAQ) - 1992-1995 Nissan Datsun 2.7D DX

Nissan Datsun Problems