1990 Nissan Prairie 2.0 J8 Attesa (column) Specs


OVERVIEW

With a fuel consumption of 19.7 mpg US - 23.7 mpg UK - 11.9 L/100km, a weight of 3020 lbs (1370 kg), the Nissan Prairie 2.0 J8 Attesa (column) has a water cooling 4 cylinder OHC engine, a Regular gasoline engine CA20S. This engine CA20S produces a maximum power of 92.2 PS (91 bhp - 67.8 kW) at 5200 rpm and a maximum torque of 145.1 Nm (107 lb.ft - 14.8 kg.m) at 2800 rpm. The engine power is transmitted to the road by the four wheel drive (4WD) with a 4AT gearbox. For stopping power, the Nissan Prairie 2.0 J8 Attesa (column) braking system includes Leading trailing drum brake at the rear and Ventilated disk at the front. Stock tire sizes are 185/70 on 14 inch rims 87S at the rear and 185/70 on 14 inch rims 87S at the front. Chassis details - Nissan Prairie 2.0 J8 Attesa (column) has parallel link strut rear suspension and transverse link strut front suspension for road holding and ride confort.

Add to compare list

GENERAL INFORMATION
Complectation Name2.0 J8 Attesa (column)
Period of ProductionSep 1990 - Jan 1992
Drive Wheels - Traction - Drivetrain4WD
Body TypeMinivan (3 row seats)
Transmission Gearbox - Number of Speeds4AT
Engine Size - Displacement - Engine Capacity1973 cm3 or 120.3 cu-in
Frame NameE-NM11
Price of New Car in Tokyo, Yen1955000

NISSAN PRAIRIE 2.0 J8 ATTESA (COLUMN) SIZE, DIMENSIONS AND WEIGHT
Exterior Length435 cm or 171.25 inches
Exterior Width169 cm or 66.53 inches
Exterior Height165 cm or 64.96 inches
Interior Length227 cm or 89.37 inches
Interior Width149 cm or 58.66 inches
Interior Height121 cm or 47.63 inches
Wheelbase259.5 cm or 102.16 inches
Front Axle Length146 cm or 57.48 inches
Rear Axle Length143 cm or 56.29 inches
Ride Height - Ground Clearance17 cm or 6.69 inches
Weight1370 kg or 3020 lbs
Num. of Seats8
Num. of Doors5
Minimum Turning Circle - Turning Diameter, m5.4
Fuel Tank Capacity15.8 US gallons
13.1 UK gallons
60 L

NISSAN PRAIRIE 2.0 J8 ATTESA (COLUMN) ENGINE TECHNICAL DATA
Engine CodeCA20S
Maximum Power - Output - Horsepower92.2 PS or 91 bhp or 67.8 kW
Maximum Power RPM5200 rpm
Maximum Torque145.1 Nm or 107 lb.ft or 14.8 kg.m
Maximum Torque RPM2800 rpm
Engine Type - Number of Cylinderswater cooling 4 cylinder OHC
Fuel TypeRegular gasoline
Fuel Consumption (10/15 mode)19.7 mpg US
23.7 mpg UK
11.9 L/100km
Fuel Consumption (60 km/h mode)34 mpg US
40.9 mpg UK
6.9 L/100km
1st Gear Ratio2.785
2nd Gear Ratio1.545
3rd Gear Ratio1
4th Fear Ratio0.694
Rear Gear Ratio2.272
Compression Ratio9
Bore8.5 cm or 3.34 inches
Stroke8.8 cm or 3.46 inches

NISSAN PRAIRIE 2.0 J8 ATTESA (COLUMN) SUSPENSION
Front Brakes - Disc DimensionsVentilated disk
Rear Brakes - Disс DimensionsLeading trailing drum brake
Front Suspensiontransverse link strut
Rear Suspension parallel link strut
Front Tyres - Rims Dimensions185/70 R14 87S
Rear Tyres - Rims Dimensions185/70 R14 87S
Tyres - Rims Dimensions195 / 70 R14 90S
Aluminium DiskStandart

NISSAN PRAIRIE 2.0 J8 ATTESA (COLUMN) EXTERIOR
SunroofNo
Tilt SunroofOption
Twin SunroofNo
Front SpoilerNo
Rear SpoilerNo
Power Adjustable Door MirrorsStandart
Xenon LampsNo
Front Fog LampsNo
Rear Fog LampsNo
Cornering LampsNo
Ultraviolet Glass ProtectionNo
Roof RailOption
Back WiperStandart

NISSAN PRAIRIE 2.0 J8 ATTESA (COLUMN) INTERIOR
Power WindowStandart
Power SteeringStandart
TachometerStandart
Centralized Door LockStandart
Keyless EnterNo
Right Hand DriveStandart
Left Hand DriveNo
Leather WindingNo
Adjustable SteeringStandart
Telescopic SteeringNo
Tilt SteeringStandart
Wood PanelNo
Cruise ControlNo
Leather SeatNo
Power Adjustable SeatsNo
Power Ajustable Front SeatNo
Power Ajustable Back SeatNo
Reclining SeatsNo
Removable SeatsStandart
Turning SeatsNo

NISSAN PRAIRIE 2.0 J8 ATTESA (COLUMN) SAFETY
Drivers AirbagNo
Passengers AirbagNo
Side AirbagNo
Side Impact BarNo
TCSNo
Break AssistNo
Parking RadarNo
Central Power Window ControlNo
Additional Stop LightStandart
Safety Belt PretensionerNo
Safety Belt LimiterNo
3 Point Safety BeltStandart
Child Car RestraintsStandart
Durable FrameNo

AMENITY
CoolerNo
Automatic Air ConditioningNo
Twin Conditioning SystemNo
Air PurifierNo
RadioStandart
Autoreverse CasetteStandart
CD PlayerNo
CD ChangerNo
MD PalyerNo
MD ChangerNo

OTHER
LSDOption
Front StabilizerNo
Rear StablilizerStandart
Special EquipmentNo


- Present
- Option
- Not Present (or Dealer Option)



More photos Nissan Prairie


By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on March 29, 2024
πŸ“Œ Introduction to the 1990-1992 Nissan Prairie 2.0 J8 Attesa
πŸ“Œ Engine Specifications
πŸ“Œ Dimensions and Sizes
πŸ“Œ Fuel Tank Capacity
πŸ“Œ Fuel Consumption
πŸ“Œ Fuel Average (MPG)
πŸ“Œ Wheel Details
πŸ“Œ Trim Levels and Models
πŸ“Œ Generations and Changes Over the Years
πŸ“Œ Conclusion: Overview of the 1990-1992 Nissan Prairie 2.0 J8 Attesa
πŸ“Œ FAQ: Common Queries About the 1990-Nissan Prairie 2.0 J8 Attesa (column)

Introduction to the 1990-1992 Nissan Prairie 2.0 J8 Attesa

The 1990-1992 Nissan Prairie 2.0 J8 Attesa (column) holds a distinct place in the automotive landscape of its time. This minivan, equipped with 4-wheel drive (4WD), emerged as a practical and versatile choice for families and individuals seeking a reliable transportation solution.

During its production span from September 1990 to January 1992, the Nissan Prairie 2.0 J8 Attesa exhibited a blend of functionality and performance. Its 4-speed automatic transmission (4AT) provided smooth gear shifts, contributing to a comfortable driving experience.

Under the hood, this minivan housed a 1973 cm³ engine, with the engine code CA20S. This powerplant delivered a maximum power output of 92.2 PS (91 bhp) at 5200 rpm, coupled with a torque of 145.1 Nm (107 lb.ft) at 2800 rpm. This water-cooled 4-cylinder OHC engine operated on regular gasoline, offering a balance between efficiency and performance.

In terms of dimensions, the Prairie 2.0 J8 Attesa exhibited a well-thought-out design. Its exterior measured 435 cm (171.25 inches) in length, 169 cm (66.53 inches) in width, and 165 cm (64.96 inches) in height, making it compact yet spacious enough to accommodate three rows of seats. The interior boasted an impressive length of 227 cm (89.37 inches), a width of 149 cm (58.66 inches), and a height of 121 cm (47.63 inches), ensuring ample room for passengers.

This minivan offered seating for eight individuals across its five doors, making it an excellent choice for larger families or group outings. With a minimum turning circle of 5.4 meters, maneuvering through urban environments was relatively hassle-free.

Moreover, the Prairie 2.0 J8 Attesa featured a fuel tank capacity of 15.8 US gallons (13.1 UK gallons or 60 liters), ensuring sufficient range for extended journeys.

As for its suspension and braking system, the vehicle employed a front suspension with transverse link struts and rear suspension with parallel link struts. The front brakes were ventilated disks, while the rear brakes used leading-trailing drum brakes. These components contributed to stable handling and effective stopping power.

Overall, the 1990-1992 Nissan Prairie 2.0 J8 Attesa (column) encapsulated the essence of a family-friendly minivan with its practicality, versatile seating, and reliable performance, making it a noteworthy choice in its era.

Engine Specifications

The heart of the 1990-1992 Nissan Prairie 2.0 J8 Attesa (column) lies in its engine specifications, defining its performance and capabilities during its production years. Under the hood of this minivan, you'll find the CA20S engine, a 4-cylinder powerplant known for its reliability and efficiency.

This 1973 cm³ engine was designed for practicality, delivering a balanced blend of power and fuel economy. With a maximum power output of 92.2 PS (91 bhp) at 5200 rpm, it provided adequate acceleration for a minivan of its time. The torque output stood at 145.1 Nm (107 lb.ft) at 2800 rpm, contributing to the vehicle's overall drivability.

The CA20S engine featured an overhead camshaft (OHC) configuration and employed water cooling to regulate temperatures effectively. While not a high-performance engine, it was well-suited for the intended purpose of the Prairie 2.0 J8 Attesa Γ’β‚¬β€œ reliable family transportation.

Fuel-wise, this engine ran on regular gasoline, offering convenience and affordability at the fuel pump. It demonstrated a fuel consumption rate of 19.7 mpg in the 10/15 mode or 34 mpg in the 60 km/h mode, reflecting its efficiency in various driving conditions.

In terms of transmission, the minivan was equipped with a 4-speed automatic transmission (4AT), providing smooth and hassle-free gear shifts for a comfortable driving experience.

While the engine specifications of the 1990-1992 Nissan Prairie 2.0 J8 Attesa (column) may not have been designed for high-performance endeavors, they embodied the values of reliability, efficiency, and practicality, making this minivan a dependable choice for families and individuals during its era.

Dimensions and Sizes

The 1990-1992 Nissan Prairie 2.0 J8 Attesa (column) was designed with carefully considered dimensions and sizes, providing a balance between compactness and spaciousness to cater to the needs of families and individuals.

Exterior Dimensions:
- Length: The minivan measured 435 cm (171.25 inches) in length, striking a harmonious balance between maneuverability and interior space.
- Width: With a width of 169 cm (66.53 inches), it offered a substantial footprint for stability on the road.
- Height: Standing at 165 cm (64.96 inches) in height, it maintained a relatively low profile, enhancing aerodynamics and ease of access.

Interior Dimensions:
- Length: Inside the cabin, passengers enjoyed an impressive length of 227 cm (89.37 inches), providing ample legroom for a comfortable journey.
- Width: The interior boasted a width of 149 cm (58.66 inches), allowing passengers to sit comfortably side by side.
- Height: The interior height was measured at 121 cm (47.63 inches), ensuring sufficient headroom for occupants.

Wheelbase and Axle Lengths:
- Wheelbase: The wheelbase of the Prairie 2.0 J8 Attesa spanned 259.5 cm (102.16 inches), contributing to stable handling and ride comfort.
- Front Axle Length: Front axle length was 146 cm (57.48 inches), while the rear axle length measured 143 cm (56.29 inches), aiding in the vehicle's balanced weight distribution.
- Ride Height: The minivan had a ground clearance of 17 cm (6.69 inches), offering a suitable ride height for urban and light off-road use.

Seating and Doors:
- Seating Capacity: This minivan accommodated up to eight passengers comfortably across its three rows of seats, making it an ideal choice for larger families or group outings.
- Doors: With five doors in total, including the rear hatch, the Prairie 2.0 J8 Attesa ensured easy access for passengers and cargo.

The carefully measured dimensions of the 1990-1992 Nissan Prairie 2.0 J8 Attesa (column) aimed to strike a balance between exterior compactness and interior spaciousness, making it a versatile and practical choice for a wide range of driving scenarios.

Fuel Tank Capacity

The fuel tank capacity of the 1990-1992 Nissan Prairie 2.0 J8 Attesa (column) played a crucial role in determining the vehicle's range and convenience for its owners. During this period, this practical minivan featured a fuel tank with a capacity of 15.8 US gallons (13.1 UK gallons or 60 liters).

This fuel tank size allowed the Prairie 2.0 J8 Attesa to cover considerable distances without frequent refueling stops. It was particularly suitable for long family journeys and daily commuting, offering a balance between fuel efficiency and range.

The generous fuel tank capacity complemented the minivan's overall design, making it well-suited for various driving scenarios, from city commuting to extended road trips, where the convenience of fewer stops for refueling was greatly appreciated by owners and passengers alike.

Fuel Consumption

Understanding the fuel consumption of the 1990-1992 Nissan Prairie 2.0 J8 Attesa (column) is crucial for owners looking to gauge its efficiency and operational costs. This minivan, designed with practicality in mind, offered respectable fuel economy figures for its time.

In the 10/15 mode, which simulated a combination of city and highway driving, the Prairie 2.0 J8 Attesa delivered a fuel consumption rate of 19.7 miles per gallon (mpg) in the United States or 23.7 mpg in the United Kingdom. Translated to the metric system, this equated to approximately 11.9 liters of fuel consumed per 100 kilometers.

In more highway-oriented driving conditions, represented by the 60 km/h mode, this minivan excelled in fuel efficiency. It achieved an impressive fuel consumption rate of 34 mpg in the United States or 40.9 mpg in the United Kingdom, which was approximately 6.9 liters of fuel per 100 kilometers.

These fuel consumption figures highlighted the Prairie 2.0 J8 Attesa's ability to strike a balance between performance and efficiency, making it an economical choice for families and individuals alike. Its practicality extended beyond its seating capacity and dimensions, as it also offered a wallet-friendly approach to fueling for daily commuting and long-distance travel.

Fuel Average (MPG)

The fuel average, often represented in miles per gallon (MPG), is a key metric for assessing the efficiency and cost-effectiveness of a vehicle like the 1990-1992 Nissan Prairie 2.0 J8 Attesa (column). This minivan, known for its practicality and family-friendly design, delivered competitive MPG figures during its production years.

In terms of fuel economy, the Prairie 2.0 J8 Attesa offered respectable numbers. In the 10/15 mode, which simulated a combination of city and highway driving, this minivan achieved an MPG rating that helped owners balance performance and fuel efficiency. The exact MPG value may vary depending on factors such as driving habits, road conditions, and maintenance, but it typically fell within the range of similar vehicles of its time.

For more highway-oriented driving conditions, reflected in the 60 km/h mode, the Prairie 2.0 J8 Attesa demonstrated even greater fuel efficiency, delivering an impressive MPG rating. This made it an economical choice for those who valued longer intervals between refueling stops and reduced fuel costs for extended journeys.

These fuel average figures emphasized the practicality and cost-conscious nature of the 1990-1992 Nissan Prairie 2.0 J8 Attesa (column), further enhancing its appeal to families and individuals seeking an efficient and reliable minivan for their transportation needs.

Wheel Details

The wheel details of the 1990-1992 Nissan Prairie 2.0 J8 Attesa (column) contribute to both its aesthetics and overall performance. These details encompass not only the size but also the type of wheels used in this minivan.

Front and Rear Wheel Dimensions:
- The Prairie 2.0 J8 Attesa featured wheels with dimensions of 185/70 R14 87S. This specification provided a balance between tire size, ride comfort, and handling characteristics.
- Both the front and rear wheels shared the same dimensions, ensuring uniformity in tire size and overall performance.

Aluminium Disk (Standard):
- The minivan came equipped with standard aluminum disks, which offered a blend of durability and aesthetic appeal. These wheels contributed to the vehicle's overall look and helped disperse heat generated during braking.

The choice of wheel dimensions and type was carefully considered to provide the 1990-1992 Nissan Prairie 2.0 J8 Attesa (column) with the necessary traction, stability, and braking performance. It ensured that this minivan not only looked the part but also delivered on the road, meeting the expectations of both families and individuals seeking a reliable and functional transportation solution.

Trim Levels and Models

The 1990-1992 Nissan Prairie 2.0 J8 Attesa (column) was offered in various trim levels and models, each catering to different preferences and needs of potential buyers. These trim levels provided a range of features and options, allowing customers to select the one that best suited their requirements.

While specific details about all available trim levels and models may vary by region, the following is a general overview of some common trim levels and features:

1. Base Model: The base model of the Prairie 2.0 J8 Attesa typically included essential features for practical transportation, making it an economical choice for budget-conscious buyers.

2. Mid-Level Trims: These trims often introduced additional convenience and comfort features, such as power windows, power steering, and centralized door locking, enhancing the overall driving experience.

3. High-End Trims: The high-end trim levels of the Prairie 2.0 J8 Attesa usually featured more advanced amenities like adjustable steering, tachometers, and possibly even power-adjustable seats, offering a more luxurious driving environment.

4. Optional Packages: Nissan may have offered optional packages that allowed customers to customize their vehicles further. These packages might include features like a sunroof, roof rails, and other enhancements.

5. Safety and Technology: Depending on the trim level, safety and technology features could vary. Some models may have included additional safety measures like airbags or advanced braking systems, contributing to passenger safety.

6. Amenities: Amenities such as air conditioning, radio systems, and cassette players might have been available in select trim levels to enhance the comfort and entertainment aspects of the minivan.

7. Special Editions: Occasionally, Nissan released special edition models with unique features or styling elements to commemorate specific events or achievements.

The availability of these trim levels and models may vary by market and production year, so potential buyers should consult local dealerships or vehicle documentation for precise details on the options and features offered for the 1990-1992 Nissan Prairie 2.0 J8 Attesa (column). These diverse choices allowed customers to find the Prairie model that best aligned with their preferences and requirements, ensuring that this minivan could cater to a wide range of driving needs.

Generations and Changes Over the Years

The 1990-1992 Nissan Prairie 2.0 J8 Attesa (column) belonged to a specific generation within the Prairie lineup, and during its production years, it underwent some notable changes and refinements to enhance its overall appeal and performance.

Generation Overview:
- The 1990-1992 model belonged to the third generation of the Nissan Prairie, which ran from 1988 to 1998. This generation marked a transition towards more modern styling and improved features.

Changes Over the Years:
- 1990 Model Year: The introduction of the 1990 model brought the Prairie 2.0 J8 Attesa (column) to the market. It featured a 4-wheel drive (4WD) system and a practical 4-speed automatic transmission (4AT). The 2.0-liter CA20S engine powered this model, delivering a balance of power and fuel efficiency.

- 1991 Model Year: As the model year progressed into 1991, there might have been minor updates or revisions in response to market feedback or regulatory requirements. These changes typically focused on improving safety features and overall performance.

- 1992 Model Year: The 1992 model year marked the end of the production run for the Prairie 2.0 J8 Attesa (column). Nissan may have made final refinements and adjustments to the model before concluding its production.

Throughout these years, the Nissan Prairie 2.0 J8 Attesa (column) maintained its reputation as a practical and reliable minivan. While significant changes were not necessarily frequent within this short production period, the model remained competitive in its segment, catering to the needs of families and individuals seeking dependable transportation.

Conclusion: Overview of the 1990-1992 Nissan Prairie 2.0 J8 Attesa

The 1990-1992 Nissan Prairie 2.0 J8 Attesa (column) was a noteworthy addition to the automotive landscape during its production years. This minivan embodied the values of practicality, reliability, and versatility, making it a suitable choice for a wide range of drivers and families.

With its 4-wheel drive (4WD) system, the Prairie 2.0 J8 Attesa provided traction and stability, making it capable of handling various road conditions. The 4-speed automatic transmission (4AT) ensured smooth gear shifts, contributing to a comfortable and hassle-free driving experience.

Under the hood, the 2.0-liter CA20S engine delivered a balance of power and fuel efficiency, complementing the vehicle's role as a family-oriented minivan. Its specifications made it a dependable choice for daily commuting and longer journeys.

The dimensions and sizes of the minivan were carefully measured to strike a balance between exterior compactness and interior spaciousness. With seating for up to eight passengers and ample legroom, it catered to larger families or group travel needs.

The generous fuel tank capacity provided a sufficient range for extended journeys, reducing the need for frequent refueling stops. In terms of fuel consumption, the Prairie 2.0 J8 Attesa offered respectable figures, balancing performance with efficiency.

Wheel details, including the use of standard aluminum disks and uniform tire dimensions, contributed to the vehicle's stability and overall performance. These wheels not only enhanced functionality but also added to the minivan's visual appeal.

Trim levels and models within this range provided a variety of features and options, allowing buyers to choose a configuration that aligned with their preferences and requirements. This diversity made it possible for the Prairie 2.0 J8 Attesa to cater to a wide audience.

As part of the third generation of the Nissan Prairie lineup, this minivan underwent refinements and updates over its production years, ensuring it remained competitive in its segment.

In summary, the 1990-1992 Nissan Prairie 2.0 J8 Attesa (column) combined practicality, reliability, and versatility, making it a reliable choice for families and individuals seeking dependable transportation. Its well-rounded features and design elements ensured that it met the needs of a diverse range of drivers during its time on the market.

FAQ: Common Queries About the 1990-1992 Nissan Prairie 2.0 J8 Attesa (column)

What are the available models for the 1990-1992 Nissan Prairie 2.0 J8 Attesa (column)?

The 1990-1992 Nissan Prairie 2.0 J8 Attesa (column) was available in various models, including the base model, mid-level trims, and high-end trims. Each model offered a different set of features and options to cater to various preferences.

Can you tell me about the engine types available for the 1990-1992 Nissan Prairie 2.0 J8 Attesa?

The 1990-1992 Nissan Prairie 2.0 J8 Attesa (column) was equipped with a 2.0-liter CA20S engine. This engine was the sole option during these production years, delivering a balance of power and fuel efficiency.

What changes were made to the Nissan Prairie 2.0 J8 Attesa (column) over the years 1990 to 1992?

While the basic design and specifications of the Nissan Prairie 2.0 J8 Attesa remained consistent throughout these years, manufacturers may have made minor updates and refinements in response to market feedback and evolving safety standards. These changes were typically aimed at improving safety features and overall performance.

Are there different generations of the Nissan Prairie 2.0 J8 Attesa (column) during these years?

The 1990-1992 Nissan Prairie 2.0 J8 Attesa (column) belonged to the third generation of the Prairie lineup, which spanned from 1988 to 1998. This generation marked a transition towards more modern styling and improved features.

What are the available complectations for the Nissan Prairie 2.0 J8 Attesa (column)?

The available complectations for the 1990-1992 Nissan Prairie 2.0 J8 Attesa (column) may vary by region and production year. Customers could typically choose from a range of trim levels, including base models and higher-end trims, each offering a different set of features and options to suit their needs. Additional special edition models or optional packages might have also been available.


Brian Wong - Senior Reviews Editor of cars-directory.net

Brian Wong / Author

Brian Wong is an accomplished automotive journalist and editor with a passion for cars. With over a decade of experience in the industry, he has established himself as a trusted voice in the automotive community. Brian has written extensively about a wide range of topics in the field, from the latest trends in car design to innovative safety features and emerging technologies. As a senior reviews editor, he is responsible for test driving and analyzing the latest cars on the market, providing readers with accurate and objective reviews. His articles are widely read and respected for their depth of knowledge and analysis. Brian is committed to staying at the forefront of the latest developments in the automotive industry, and is dedicated to sharing his expertise and insights with his readers.

Add Comment

 * - The field should be filled
* Your Name:
 Contact (e-mail, phone...):
* Comments:
Photos: