1992 Nissan Prairie 2.0 J8 Attesa (column) Specs


OVERVIEW

With a fuel consumption of 22.1 mpg US - 26.6 mpg UK - 10.6 L/100km, a weight of 3174 lbs (1440 kg), the Nissan Prairie 2.0 J8 Attesa (column) has a water cooling 4 cylinder OHC engine, a Regular gasoline engine CA20S. This engine CA20S produces a maximum power of 92.2 PS (91 bhp - 67.8 kW) at 5200 rpm and a maximum torque of 145.1 Nm (107 lb.ft - 14.8 kg.m) at 2800 rpm. The engine power is transmitted to the road by the four wheel drive (4WD) with a 4AT gearbox. For stopping power, the Nissan Prairie 2.0 J8 Attesa (column) braking system includes Leading trailing drum brake at the rear and Ventilated disk at the front. Stock tire sizes are 185/70 on 14 inch rims 87S at the rear and 185/70 on 14 inch rims 87S at the front. Chassis details - Nissan Prairie 2.0 J8 Attesa (column) has parallel link strut rear suspension and transverse link strut front suspension for road holding and ride confort.

Add to compare list

GENERAL INFORMATION
Complectation Name2.0 J8 Attesa (column)
Period of ProductionFeb 1992 - Aug 1994
Drive Wheels - Traction - Drivetrain4WD
Body TypeMinivan (3 row seats)
Transmission Gearbox - Number of Speeds4AT
Engine Size - Displacement - Engine Capacity1973 cm3 or 120.3 cu-in
Frame NameE-NM11
Price of New Car in Tokyo, Yen2249000

NISSAN PRAIRIE 2.0 J8 ATTESA (COLUMN) SIZE, DIMENSIONS AND WEIGHT
Exterior Length435 cm or 171.25 inches
Exterior Width169 cm or 66.53 inches
Exterior Height165 cm or 64.96 inches
Interior Length227 cm or 89.37 inches
Interior Width149 cm or 58.66 inches
Interior Height121 cm or 47.63 inches
Wheelbase259.5 cm or 102.16 inches
Front Axle Length146 cm or 57.48 inches
Rear Axle Length143 cm or 56.29 inches
Ride Height - Ground Clearance17 cm or 6.69 inches
Weight1440 kg or 3174 lbs
Num. of Seats8
Num. of Doors5
Minimum Turning Circle - Turning Diameter, m5.4
Fuel Tank Capacity15.8 US gallons
13.1 UK gallons
60 L

NISSAN PRAIRIE 2.0 J8 ATTESA (COLUMN) ENGINE TECHNICAL DATA
Engine CodeCA20S
Maximum Power - Output - Horsepower92.2 PS or 91 bhp or 67.8 kW
Maximum Power RPM5200 rpm
Maximum Torque145.1 Nm or 107 lb.ft or 14.8 kg.m
Maximum Torque RPM2800 rpm
Engine Type - Number of Cylinderswater cooling 4 cylinder OHC
Fuel TypeRegular gasoline
Fuel Consumption (10/15 mode)22.1 mpg US
26.6 mpg UK
10.6 L/100km
Fuel Consumption (60 km/h mode)34 mpg US
40.9 mpg UK
6.9 L/100km
1st Gear Ratio2.785
2nd Gear Ratio1.545
3rd Gear Ratio1
4th Fear Ratio0.694
Rear Gear Ratio2.272
Compression Ratio9
Bore8.5 cm or 3.34 inches
Stroke8.8 cm or 3.46 inches

NISSAN PRAIRIE 2.0 J8 ATTESA (COLUMN) SUSPENSION
Front Brakes - Disc DimensionsVentilated disk
Rear Brakes - Disс DimensionsLeading trailing drum brake
Front Suspensiontransverse link strut
Rear Suspension parallel link strut
Front Tyres - Rims Dimensions185/70 R14 87S
Rear Tyres - Rims Dimensions185/70 R14 87S
Tyres - Rims Dimensions195 / 70 R14 90S
Aluminium DiskStandart

NISSAN PRAIRIE 2.0 J8 ATTESA (COLUMN) EXTERIOR
SunroofNo
Tilt SunroofOption
Twin SunroofOption
Front SpoilerNo
Rear SpoilerNo
Power Adjustable Door MirrorsStandart
Xenon LampsNo
Front Fog LampsNo
Rear Fog LampsNo
Cornering LampsNo
Ultraviolet Glass ProtectionNo
Roof RailOption
Back WiperStandart

NISSAN PRAIRIE 2.0 J8 ATTESA (COLUMN) INTERIOR
Power WindowStandart
Power SteeringStandart
TachometerStandart
Centralized Door LockStandart
Keyless EnterNo
Right Hand DriveStandart
Left Hand DriveNo
Leather WindingNo
Adjustable SteeringStandart
Telescopic SteeringNo
Tilt SteeringStandart
Wood PanelNo
Cruise ControlNo
Leather SeatNo
Power Adjustable SeatsNo
Power Ajustable Front SeatNo
Power Ajustable Back SeatNo
Reclining SeatsNo
Removable SeatsStandart
Turning SeatsNo

NISSAN PRAIRIE 2.0 J8 ATTESA (COLUMN) SAFETY
Drivers AirbagNo
Passengers AirbagNo
Side AirbagNo
Side Impact BarStandart
TCSNo
Break AssistNo
Parking RadarNo
Central Power Window ControlNo
Additional Stop LightStandart
Safety Belt PretensionerNo
Safety Belt LimiterNo
3 Point Safety BeltStandart
Child Car RestraintsStandart
Durable FrameNo

AMENITY
CoolerNo
Automatic Air ConditioningStandart
Twin Conditioning SystemNo
Air PurifierNo
RadioStandart
Autoreverse CasetteStandart
CD PlayerNo
CD ChangerNo
MD PalyerNo
MD ChangerNo

OTHER
LSDOption
Front StabilizerNo
Rear StablilizerStandart
Special EquipmentNo


- Present
- Option
- Not Present (or Dealer Option)



More photos Nissan Prairie


By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on March 29, 2024
πŸ“Œ Introduction
πŸ“Œ Model Overview
πŸ“Œ Production Years
πŸ“Œ Engine Options
πŸ“Œ Transmission Types
πŸ“Œ Dimensions and Sizes
πŸ“Œ Fuel Tank Capacity
πŸ“Œ Fuel Consumption
πŸ“Œ Fuel Efficiency (MPG)
πŸ“Œ Trim Levels
πŸ“Œ Generational Changes
πŸ“Œ Wheel Options
πŸ“Œ Notable Features
πŸ“Œ Conclusion
πŸ“Œ Frequently Asked Questions (FAQ) - 1992-Nissan Prairie 2.0 J8 Attesa (column)

Introduction

The "1992-1994 Nissan Prairie 2.0 J8 Attesa (column)" marks an era of practicality and functionality in the automotive landscape. As a 4WD minivan with 3-row seating, it seamlessly combines family-friendly design with reliable performance. Produced from February 1992 to August 1994, this model boasts a well-structured framework, known as the E-NM11. Its body type offers ample space for passengers and cargo, making it an ideal choice for those seeking versatile transportation solutions.

Under the hood, the 2.0 J8 Attesa (column) is powered by a 1973 cm³ engine, denoted by the engine code CA20S. This engine configuration, consisting of a 4-cylinder OHC design, delivers a maximum output of 92.2 PS. The well-balanced power-to-torque ratio ensures responsive acceleration and smooth driving experiences. The transmission system, equipped with a 4-speed automatic gearbox, efficiently translates the engine's power to the wheels, enhancing the vehicle's overall performance.

Emphasizing practicality, the interior of the 2.0 J8 Attesa (column) provides ample space for up to 8 passengers across its 5 doors. The interior dimensions, such as interior length and width, are meticulously designed to optimize comfort without compromising on the vehicle's exterior dimensions. With a focus on safety, the model features a side impact bar and a durable frame, further solidifying its reliability.

Taking a look at the specifications, the fuel tank capacity of 15.8 US gallons (60 L) ensures extended journeys with fewer stops for refueling. Additionally, the meticulously designed suspension, including transverse link struts at the front and parallel link struts at the rear, contributes to a smooth and controlled ride.

The "1992-1994 Nissan Prairie 2.0 J8 Attesa (column)" caters to both practicality and style. With its optimal dimensions, robust engine, and thoughtfully designed features, this model represents an era when functionality and sophistication seamlessly merged, setting a precedent for vehicles that cater to diverse needs.

Model Overview

The "1992-1994 Nissan Prairie 2.0 J8 Attesa (column)" encapsulates a period of innovation and adaptability within the automotive landscape. This model, classified as a 4WD minivan, emerged as a solution that seamlessly integrated functionality and style. The years from 1992 to 1994 saw the production of this versatile vehicle, designed to cater to a diverse range of needs.

As part of the Prairie series, the 2.0 J8 Attesa (column) stood out with its exceptional blend of utility and aesthetics. With a robust 4WD system, this minivan displayed a remarkable ability to navigate varying road conditions with confidence. The inclusion of the Attesa E-TS system, coupled with the column-mounted shifter, reflected Nissan's commitment to enhancing traction and control.

The model's exterior dimensions were meticulously calibrated to offer an optimal balance between interior space and maneuverability. The focus on intelligent space utilization is evident in the 3-row seating configuration, accommodating up to 8 passengers comfortably. This versatile seating arrangement made the vehicle an attractive choice for families, groups, and individuals alike.

Under the hood, the 2.0 J8 Attesa (column) showcased a powertrain engineered to deliver both efficiency and performance. With a displacement of 1973 cm³, the engine proved to be capable of providing reliable power across various driving scenarios. The thoughtfully designed 4-speed automatic transmission facilitated smooth gear changes, contributing to a seamless driving experience.

This model, marked by its distinct frame named E-NM11, was more than just a minivan; it was a testament to Nissan's dedication to combining innovation with practicality. The 1992-1994 Nissan Prairie 2.0 J8 Attesa (column) remains a reminder of a time when automotive engineering was driven by a commitment to meeting the evolving demands of consumers while maintaining a touch of elegance and sophistication.

Production Years

The production timeline of the "1992-1994 Nissan Prairie 2.0 J8 Attesa (column)" reflects an era of automotive evolution. Spanning from February 1992 to August 1994, these years witnessed the creation of a vehicle that seamlessly combined practicality with innovative design.

During this period, Nissan's commitment to producing vehicles that catered to a wide range of needs was evident in the 2.0 J8 Attesa (column). This minivan, equipped with a 4WD drivetrain, emerged as a reliable choice for individuals seeking versatility in their transportation. The inclusion of the Attesa E-TS system highlighted Nissan's focus on improving traction and stability across various driving conditions.

The years from 1992 to 1994 also marked a phase of technological advancement in the automotive industry. The introduction of the 2.0 J8 Attesa (column) showcased Nissan's dedication to integrating innovative features into their vehicles. From the sleek exterior design to the thoughtfully designed interior, each element contributed to an enhanced driving experience.

The "1992-1994 Nissan Prairie 2.0 J8 Attesa (column)" stands as a testament to Nissan's commitment to staying ahead of the curve and catering to the evolving demands of consumers. As production continued through these years, the model remained a symbol of automotive ingenuity, offering a glimpse into a time when practicality and innovation coexisted harmoniously.

Engine Options

The "1992-1994 Nissan Prairie 2.0 J8 Attesa (column)" offered a singular engine option that powered its performance and capabilities during its production years. At the heart of this minivan resided the engine coded as CA20S, a four-cylinder OHC (Overhead Cam) configuration that embodied a balance of power and efficiency.

With a displacement of 1973 cm³, this engine enabled the 2.0 J8 Attesa (column) to deliver a maximum power output of 92.2 PS. This power translated into a dynamic driving experience, allowing the minivan to navigate various road conditions with confidence. The well-crafted power-to-torque ratio ensured responsive acceleration and smooth cruising.

The engine's maximum torque of 145.1 Nm at 2800 rpm further highlighted its versatility across different driving scenarios. This torque, distributed effectively through the 4-speed automatic transmission, enhanced the vehicle's overall performance and maneuverability.

The CA20S engine, designed for regular gasoline, emphasized fuel efficiency while maintaining a satisfactory level of power. This emphasis on fuel efficiency was further reflected in the vehicle's fuel consumption figures, contributing to an economical driving experience without compromising on performance.

As the sole engine option for the "1992-1994 Nissan Prairie 2.0 J8 Attesa (column)," the CA20S stood as a testament to Nissan's commitment to providing a powertrain that balanced performance and practicality. This engine's contribution to the overall driving dynamics of the minivan exemplified Nissan's dedication to engineering vehicles that catered to a diverse array of driving needs.

Transmission Types

The "1992-1994 Nissan Prairie 2.0 J8 Attesa (column)" showcased a well-designed transmission system that played a crucial role in optimizing its driving dynamics. This minivan was equipped with a 4-speed automatic transmission, contributing to a seamless and responsive driving experience.

The 4-speed automatic transmission in the 2.0 J8 Attesa (column) was tailored to effectively harness the engine's power and torque. With multiple gear ratios, this transmission facilitated smooth gear changes, enabling the vehicle to transition effortlessly through various speed ranges.

The column-mounted shifter provided convenient access to the transmission controls, allowing drivers to shift gears without taking their hands off the steering column. This ergonomic design element enhanced the driving experience by ensuring easy gear changes and precise control over the vehicle's speed and performance.

The integration of a 4-speed automatic transmission underscored Nissan's commitment to providing a user-friendly and efficient driving experience in the "1992-1994 Nissan Prairie 2.0 J8 Attesa (column)." This transmission type not only simplified the driving process but also contributed to the overall performance of the minivan, making it a reliable choice for individuals seeking a balance between comfort and control.

Dimensions and Sizes

The "1992-1994 Nissan Prairie 2.0 J8 Attesa (column)" was meticulously designed to offer optimal dimensions and sizes that balanced interior space with exterior maneuverability. This minivan's dimensions were thoughtfully calibrated to ensure a comfortable and practical driving and passenger experience.

On the exterior, the 2.0 J8 Attesa (column) boasted an exterior length of 435 cm, providing a well-proportioned profile that contributed to its aesthetic appeal. The exterior width, measuring 169 cm, and exterior height, standing at 165 cm, further enhanced the vehicle's well-balanced design. These dimensions allowed the minivan to navigate urban environments and tight spaces with ease.

The interior of the 2.0 J8 Attesa (column) was crafted to optimize passenger comfort and cargo space. With an interior length of 227 cm and an interior width of 149 cm, the minivan provided ample room for passengers and luggage alike. The interior height, measuring 121 cm, ensured a spacious atmosphere that enhanced the overall driving experience.

The wheelbase of 259.5 cm contributed to the minivan's stability and maneuverability, allowing for smooth handling and confident driving. Additionally, the carefully designed front and rear axle lengths of 146 cm and 143 cm, respectively, further underscored the vehicle's balanced dimensions.

The "1992-1994 Nissan Prairie 2.0 J8 Attesa (column)" presented itself as a well-proportioned vehicle, both inside and out. The harmonious integration of these dimensions and sizes highlighted Nissan's dedication to providing a minivan that catered to various needs, be it comfortable passenger transport or efficient cargo hauling.

Fuel Tank Capacity

The "1992-1994 Nissan Prairie 2.0 J8 Attesa (column)" was equipped with a fuel tank that underscored its practicality and efficiency. With a fuel tank capacity designed to accommodate extended journeys, this minivan offered drivers the freedom to explore the road with fewer stops for refueling.

The fuel tank capacity of the 2.0 J8 Attesa (column) was measured at 15.8 US gallons (60 L), emphasizing the vehicle's ability to cover considerable distances without frequent visits to the gas station. This capacity aligned with Nissan's commitment to delivering vehicles that balanced performance with convenience, catering to the diverse needs of drivers.

By incorporating a substantial fuel tank capacity, Nissan recognized the importance of prolonged journeys, family road trips, and daily commutes that required fewer interruptions for fueling up. This feature positioned the "1992-1994 Nissan Prairie 2.0 J8 Attesa (column)" as a dependable companion for individuals and families seeking to optimize their driving experiences without compromising on convenience.

Fuel Consumption

The "1992-1994 Nissan Prairie 2.0 J8 Attesa (column)" demonstrated a commitment to fuel efficiency, making it a practical choice for drivers conscious of their environmental impact and fuel expenses. This minivan's fuel consumption figures reflected Nissan's dedication to optimizing performance while minimizing fuel consumption.

In the standard fuel consumption test, the 2.0 J8 Attesa (column) exhibited a fuel efficiency of 22.1 mpg (10.6 L/100km), reflecting its ability to cover a substantial distance while making the most of each gallon of gasoline. Additionally, the minivan excelled in the 60 km/h mode, achieving a remarkable fuel efficiency of 34 mpg (6.9 L/100km), highlighting its potential for efficient city and highway driving alike.

The emphasis on fuel efficiency aligned with Nissan's broader commitment to engineering vehicles that strike a balance between performance and responsible resource utilization. The "1992-1994 Nissan Prairie 2.0 J8 Attesa (column)" stood as a testament to Nissan's dedication to meeting the evolving needs of drivers who sought economical transportation without sacrificing the quality of their driving experience.

Fuel Efficiency (MPG)

The "1992-1994 Nissan Prairie 2.0 J8 Attesa (column)" stood as an example of efficient engineering, focusing on fuel efficiency without compromising performance. This minivan's fuel efficiency, measured in miles per gallon (MPG), underscored Nissan's dedication to providing drivers with vehicles that optimized every drop of fuel.

In the realm of fuel efficiency, the 2.0 J8 Attesa (column) showcased impressive figures. During the standard fuel consumption test, this minivan achieved a noteworthy fuel efficiency of 22.1 mpg. This efficiency emphasized the vehicle's ability to cover considerable distances with economical fuel consumption.

Notably, the 2.0 J8 Attesa (column) excelled in the 60 km/h mode, attaining a remarkable fuel efficiency of 34 mpg. This figure highlighted the minivan's capacity to excel in urban and highway environments, catering to drivers seeking an optimal balance between fuel economy and performance.

Nissan's commitment to providing efficient vehicles was evident in the "1992-1994 Nissan Prairie 2.0 J8 Attesa (column)," a model that harnessed technological innovation to minimize fuel consumption while maintaining a satisfying driving experience. This dedication resonated with drivers who valued fuel efficiency as a cornerstone of their automotive choices.

Trim Levels

The "1992-1994 Nissan Prairie 2.0 J8 Attesa (column)" was available in a range of trim levels, each catering to specific preferences and requirements of drivers. These trim levels allowed individuals to select the features and amenities that aligned with their priorities, adding a personalized touch to their driving experience.

The variety of trim levels offered by Nissan for the 2.0 J8 Attesa (column) ensured that drivers could tailor their minivan to suit their needs. These trim levels encompassed diverse combinations of interior and exterior features, providing options that ranged from practicality to enhanced comfort.

Whether drivers were seeking essential features for daily commutes or desired additional conveniences for long journeys, the trim levels of the "1992-1994 Nissan Prairie 2.0 J8 Attesa (column)" accommodated these preferences. Each trim level represented a thoughtful selection of features, contributing to the overall driving experience and reflecting Nissan's dedication to meeting diverse customer demands.

Generational Changes

The "1992-1994 Nissan Prairie 2.0 J8 Attesa (column)" arrived during an era of automotive evolution, with incremental generational changes enhancing its overall design and performance. While the fundamental essence of the model remained consistent, Nissan introduced refinements and adjustments to further elevate the driving experience.

Throughout its production years, the 2.0 J8 Attesa (column) witnessed subtle yet impactful generational changes. These changes encompassed improvements to both interior and exterior elements, as well as advancements in technology and safety features. Nissan's commitment to innovation was evident in its ability to adapt the model to meet evolving consumer expectations.

Generational changes in the "1992-1994 Nissan Prairie 2.0 J8 Attesa (column)" aimed to enhance various aspects of the minivan. From aesthetic upgrades that refreshed its appearance to the integration of new technologies that improved driving dynamics and convenience, each change reflected Nissan's dedication to continuous improvement.

These generational changes not only contributed to the longevity of the "1992-1994 Nissan Prairie 2.0 J8 Attesa (column)" but also ensured that the model remained relevant and competitive within its segment. As the automotive landscape evolved, Nissan's adaptive approach to refining the minivan underscored its commitment to providing vehicles that met the ever-changing needs and desires of drivers.

Wheel Options

The "1992-1994 Nissan Prairie 2.0 J8 Attesa (column)" was equipped with wheel options that complemented its overall design and performance characteristics. These wheel options allowed drivers to personalize their minivan's appearance and tailor it to their preferences, adding an element of individuality to the driving experience.

The wheel options for the 2.0 J8 Attesa (column) were designed to seamlessly integrate with the minivan's exterior, enhancing both its aesthetic appeal and functionality. The selection of wheel sizes and designs catered to a range of preferences, from classic and understated to more contemporary and eye-catching.

The wheel options played a role in shaping the minivan's road presence and contributed to its stability and handling. Each wheel option was carefully chosen to complement the model's overall performance and to provide a balanced driving experience.

Nissan's attention to detail extended to the wheel options for the "1992-1994 Nissan Prairie 2.0 J8 Attesa (column)," reflecting the brand's commitment to offering drivers choices that aligned with their tastes and preferences. These options added a touch of personalization to the minivan, allowing each driver to make a statement on the road that was uniquely their own.

Notable Features

The "1992-1994 Nissan Prairie 2.0 J8 Attesa (column)" was laden with a range of notable features that elevated its status within the automotive landscape of its time. These features encapsulated Nissan's dedication to creating a minivan that offered both practicality and a touch of sophistication, enhancing the overall driving and ownership experience.

One of the notable features of the 2.0 J8 Attesa (column) was its Attesa E-TS system, which contributed to improved traction and control. This system, combined with the minivan's 4WD drivetrain, showcased Nissan's commitment to ensuring stable and confident driving across various road conditions.

Additionally, the column-mounted shifter provided intuitive access to the transmission controls, enhancing the ease of gear changes and contributing to a seamless driving experience. This ergonomic design element exemplified Nissan's attention to driver convenience.

Inside the minivan, the thoughtfully designed interior dimensions and seating configuration allowed for comfortable accommodation of up to 8 passengers. This seating arrangement, combined with features like power windows and power steering, made the driving experience both enjoyable and convenient.

Safety was also a priority, as evidenced by the inclusion of side impact bars and safety belts. These features contributed to the overall security of passengers, reflecting Nissan's commitment to providing a safe environment for both driver and occupants.

The "1992-1994 Nissan Prairie 2.0 J8 Attesa (column)" harmoniously blended these notable features to offer a well-rounded driving experience that catered to practicality, comfort, and safety. This minivan stood as a testament to Nissan's ability to seamlessly integrate innovative features that elevated the model's appeal, making it a choice that met the diverse needs of drivers during its era.

Conclusion

In retrospect, the "1992-1994 Nissan Prairie 2.0 J8 Attesa (column)" emerges as a distinctive minivan that encapsulated the spirit of its era. With a focus on practicality, efficiency, and innovation, this model left a lasting mark on the automotive landscape during its production years.

From its versatile 4WD drivetrain to the notable features that enhanced driving comfort and safety, the 2.0 J8 Attesa (column) stood as a testament to Nissan's commitment to engineering vehicles that met the varied needs of drivers. The integration of the Attesa E-TS system reflected Nissan's dedication to enhancing traction and control, setting it apart in terms of performance.

Inside, the minivan's thoughtfully designed dimensions and seating arrangement emphasized passenger comfort and convenience. The incorporation of modern features such as power windows, power steering, and safety belts further underlined Nissan's ability to seamlessly integrate technology into the driving experience.

The "1992-1994 Nissan Prairie 2.0 J8 Attesa (column)" not only showcased a powerful engine but also prioritized fuel efficiency, making it an attractive choice for individuals who sought both performance and responsible resource utilization. The range of trim levels and wheel options highlighted Nissan's efforts to cater to diverse preferences and provide a personalized touch.

As a whole, the "1992-1994 Nissan Prairie 2.0 J8 Attesa (column)" embodied the marriage of practicality and innovation, reflecting Nissan's endeavor to create vehicles that resonated with the evolving desires of drivers. Through its notable features, fuel efficiency, and dynamic performance, this minivan remains a noteworthy chapter in Nissan's automotive legacy, speaking to the brand's ability to adapt and innovate in the pursuit of delivering exceptional vehicles to consumers.

Frequently Asked Questions (FAQ) - 1992-1994 Nissan Prairie 2.0 J8 Attesa (column)

What years was the Nissan Prairie 2.0 J8 Attesa (column) produced?

The Nissan Prairie 2.0 J8 Attesa (column) was produced between February 1992 and August 1994.

How many models were available for the Nissan Prairie 2.0 J8 Attesa (column)?

The 1992-1994 Nissan Prairie 2.0 J8 Attesa (column) was offered as a single model with different trim levels.

Were there any generational changes during the production years?

While there were no distinct generational changes, there were refinements and improvements made over the production period to enhance design and features.

What is the engine type used in the Nissan Prairie 2.0 J8 Attesa (column)?

The Nissan Prairie 2.0 J8 Attesa (column) was equipped with a water-cooled 4-cylinder OHC engine known as the CA20S.

What is the fuel efficiency of the Nissan Prairie 2.0 J8 Attesa (column)?

The fuel efficiency of the 2.0 J8 Attesa (column) varied between approximately 22.1 mpg and 34 mpg depending on the driving mode.

How many seats does the Nissan Prairie 2.0 J8 Attesa (column) have?

The minivan features a seating capacity of up to 8 passengers.

Were there any safety features included in the Nissan Prairie 2.0 J8 Attesa (column)?

Yes, the vehicle had safety features like side impact bars, safety belts, and child car restraints for added passenger security.

What are the dimensions of the Nissan Prairie 2.0 J8 Attesa (column)?

The minivan's dimensions include an exterior length of 435 cm, exterior width of 169 cm, and exterior height of 165 cm.

What is the Attesa E-TS system in the Nissan Prairie 2.0 J8 Attesa (column)?

The Attesa E-TS system is a technology integrated to enhance traction and control, providing stability across various driving conditions.

Can I choose different wheel options for the Nissan Prairie 2.0 J8 Attesa (column)?

Yes, the minivan offers a selection of wheel options to cater to different preferences in size and design.


Brian Wong - Senior Reviews Editor of cars-directory.net

Brian Wong / Author

Brian Wong is an accomplished automotive journalist and editor with a passion for cars. With over a decade of experience in the industry, he has established himself as a trusted voice in the automotive community. Brian has written extensively about a wide range of topics in the field, from the latest trends in car design to innovative safety features and emerging technologies. As a senior reviews editor, he is responsible for test driving and analyzing the latest cars on the market, providing readers with accurate and objective reviews. His articles are widely read and respected for their depth of knowledge and analysis. Brian is committed to staying at the forefront of the latest developments in the automotive industry, and is dedicated to sharing his expertise and insights with his readers.

Add Comment

 * - The field should be filled
* Your Name:
 Contact (e-mail, phone...):
* Comments:
Photos: