1992 Nissan Prairie 2.0 M5 Attesa Specs
OVERVIEW
With a fuel consumption of 24.5 mpg US - 29.4 mpg UK - 9.6 L/100km, a weight of 2954 lbs (1340 kg), the Nissan Prairie 2.0 M5 Attesa has a water cooling 4 cylinder OHC engine, a Regular gasoline engine CA20S. This engine CA20S produces a maximum power of 92.2 PS (91 bhp - 67.8 kW) at 5200 rpm and a maximum torque of 145.1 Nm (107 lb.ft - 14.8 kg.m) at 2800 rpm. The engine power is transmitted to the road by the four wheel drive (4WD) with a 5MT gearbox. For stopping power, the Nissan Prairie 2.0 M5 Attesa braking system includes Leading trailing drum brake at the rear and Ventilated disk at the front. Stock tire sizes are 185/70 on 14 inch rims 87S at the rear and 185/70 on 14 inch rims 87S at the front. Chassis details - Nissan Prairie 2.0 M5 Attesa has parallel link strut rear suspension and transverse link strut front suspension for road holding and ride confort.
Add to compare listGENERAL INFORMATION | |
---|---|
Complectation Name | 2.0 M5 Attesa |
Period of Production | Feb 1992 - Aug 1994 |
Drive Wheels - Traction - Drivetrain | 4WD |
Body Type | Minivan (2 row seats) |
Transmission Gearbox - Number of Speeds | 5MT |
Engine Size - Displacement - Engine Capacity | 1973 cm3 or 120.3 cu-in |
Frame Name | E-NM11 |
Price of New Car in Tokyo, Yen | 1672000 |
NISSAN PRAIRIE 2.0 M5 ATTESA SIZE, DIMENSIONS AND WEIGHT | |
Exterior Length | 435 cm or 171.25 inches |
Exterior Width | 169 cm or 66.53 inches |
Exterior Height | 165 cm or 64.96 inches |
Interior Length | 179.5 cm or 70.66 inches |
Interior Width | 149 cm or 58.66 inches |
Interior Height | 121 cm or 47.63 inches |
Wheelbase | 259.5 cm or 102.16 inches |
Front Axle Length | 146 cm or 57.48 inches |
Rear Axle Length | 143 cm or 56.29 inches |
Ride Height - Ground Clearance | 17 cm or 6.69 inches |
Weight | 1340 kg or 2954 lbs |
Num. of Seats | 5 |
Num. of Doors | 5 |
Minimum Turning Circle - Turning Diameter, m | 5.4 |
Fuel Tank Capacity | 15.8 US gallons 13.1 UK gallons 60 L |
NISSAN PRAIRIE 2.0 M5 ATTESA ENGINE TECHNICAL DATA | |
Engine Code | CA20S |
Maximum Power - Output - Horsepower | 92.2 PS or 91 bhp or 67.8 kW |
Maximum Power RPM | 5200 rpm |
Maximum Torque | 145.1 Nm or 107 lb.ft or 14.8 kg.m |
Maximum Torque RPM | 2800 rpm |
Engine Type - Number of Cylinders | water cooling 4 cylinder OHC |
Fuel Type | Regular gasoline |
Fuel Consumption (10/15 mode) | 24.5 mpg US 29.4 mpg UK 9.6 L/100km |
Fuel Consumption (60 km/h mode) | 39.8 mpg US 47.8 mpg UK 5.9 L/100km |
1st Gear Ratio | 3.714 |
2nd Gear Ratio | 2.095 |
3rd Gear Ratio | 1.343 |
4th Fear Ratio | 0.954 |
5th Gear Ratio | 0.74 |
Rear Gear Ratio | 3.428 |
Compression Ratio | 9 |
Bore | 8.5 cm or 3.34 inches |
Stroke | 8.8 cm or 3.46 inches |
NISSAN PRAIRIE 2.0 M5 ATTESA SUSPENSION | |
Front Brakes - Disc Dimensions | Ventilated disk |
Rear Brakes - DisΡ Dimensions | Leading trailing drum brake |
Front Suspension | transverse link strut |
Rear Suspension | parallel link strut |
Front Tyres - Rims Dimensions | 185/70 R14 87S |
Rear Tyres - Rims Dimensions | 185/70 R14 87S |
Tyres - Rims Dimensions | 185 / 70 R14 87S |
Aluminium Disk | |
NISSAN PRAIRIE 2.0 M5 ATTESA EXTERIOR | |
Sunroof | |
Tilt Sunroof | |
Twin Sunroof | |
Front Spoiler | |
Rear Spoiler | |
Power Adjustable Door Mirrors | |
Xenon Lamps | |
Front Fog Lamps | |
Rear Fog Lamps | |
Cornering Lamps | |
Ultraviolet Glass Protection | |
Roof Rail | |
Back Wiper | |
NISSAN PRAIRIE 2.0 M5 ATTESA INTERIOR | |
Power Window | |
Power Steering | |
Tachometer | |
Centralized Door Lock | |
Keyless Enter | |
Right Hand Drive | |
Left Hand Drive | |
Leather Winding | |
Adjustable Steering | |
Telescopic Steering | |
Tilt Steering | |
Wood Panel | |
Cruise Control | |
Leather Seat | |
Power Adjustable Seats | |
Power Ajustable Front Seat | |
Power Ajustable Back Seat | |
Reclining Seats | |
Removable Seats | |
Turning Seats | |
NISSAN PRAIRIE 2.0 M5 ATTESA SAFETY | |
Drivers Airbag | |
Passengers Airbag | |
Side Airbag | |
Side Impact Bar | |
TCS | |
Break Assist | |
Parking Radar | |
Central Power Window Control | |
Additional Stop Light | |
Safety Belt Pretensioner | |
Safety Belt Limiter | |
3 Point Safety Belt | |
Child Car Restraints | |
Durable Frame | |
AMENITY | |
Cooler | |
Automatic Air Conditioning | |
Twin Conditioning System | |
Air Purifier | |
Radio | |
Autoreverse Casette | |
CD Player | |
CD Changer | |
MD Palyer | |
MD Changer | |
OTHER | |
LSD | |
Front Stabilizer | |
Rear Stablilizer | |
Special Equipment | No |
- Present
- Option
- Not Present (or Dealer Option)
More photos Nissan Prairie
By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on April 25, 2024
π Model Years
π Engine Options
π Dimensions and Sizes
π Fuel Tank Capacity
π Fuel Consumption
π Fuel Efficiency (MPG)
π Trim Levels
π Transmission Options
π Wheel Options
π Generation Overview
π Notable Features
π Interior Space
π Performance Metrics
π Conclusion
π Frequently Asked Questions (FAQ) about the 1992-Nissan Prairie 2.0 M5 Attesa
Introduction
The "1992-1994 Nissan Prairie 2.0 M5 Attesa" represents a distinctive offering in the automotive landscape during its production span from February 1992 to August 1994. As a prominent member of the Prairie lineup, this minivan introduces an intriguing blend of features and capabilities.Equipped with a robust 4WD drivetrain, the Prairie 2.0 M5 Attesa showcases its commitment to traction and stability, making it suitable for various road conditions. With a compact and practical body type of a minivan with 2 rows of seats, it caters to families and commuters alike.
Under the hood, the heart of this vehicle lies in its 1973 cmΓΒ³ engine, presenting power and performance alongside efficient fuel consumption. The inclusion of a 5-speed manual transmission allows for a dynamic driving experience, contributing to the overall driving pleasure.
The dimensions of the Prairie 2.0 M5 Attesa are carefully designed to balance exterior sleekness and interior comfort. Its thoughtful dimensions enhance maneuverability, making it a suitable choice for urban and suburban environments. Additionally, the interior provides ample space for passengers and cargo, ensuring a practical and versatile driving experience.
The suspension system, characterized by transverse link strut at the front and parallel link strut at the rear, contributes to the vehicle's stability and ride comfort. This, combined with the appropriately sized tires, ensures a balanced driving performance.
The "1992-1994 Nissan Prairie 2.0 M5 Attesa" serves as a testament to Nissan's dedication to innovation, offering drivers a compact yet capable vehicle with a range of features designed to enhance both performance and comfort. As we delve deeper into its specifications, we gain a comprehensive understanding of its distinctive attributes that make it a notable presence on the roads during its era.
Model Years
The "1992-1994 Nissan Prairie 2.0 M5 Attesa" represents a distinct era in automotive history, manufactured exclusively between February 1992 and August 1994. These model years mark the brief yet impactful presence of this minivan in the market.Emerging during the early 1990s, the Prairie 2.0 M5 Attesa encapsulates the design and engineering trends of its time. As technology and innovation evolved, Nissan incorporated its latest advancements into this model, reflecting the automotive landscape of the era.
With its production spanning across these years, the Prairie 2.0 M5 Attesa embodies the spirit of its generation. As a testament to Nissan's commitment to creating versatile and capable vehicles, this model served as a solution for families, urban commuters, and those seeking a balance between performance and practicality.
Whether navigating city streets or embarking on longer journeys, the Prairie 2.0 M5 Attesa represents a snapshot of automotive design and engineering from the early 1990s, offering drivers a unique blend of features that characterized this era's vehicles.
Engine Options
Powering the "1992-1994 Nissan Prairie 2.0 M5 Attesa" are engine options that underpin its performance and efficiency. The available engines for this model were carefully selected to align with the needs of drivers during that period.At the core of these engine options lies the 1973 cmΓΒ³ engine, denoted by the engine code CA20S. This engine was specifically designed to offer a balance between power output and fuel efficiency, catering to a wide range of driving scenarios.
With a maximum power output of 92.2 PS or 91 bhp, and a peak torque of 145.1 Nm or 107 lb.ft, this engine provides the Prairie 2.0 M5 Attesa with the necessary power to tackle both urban and highway environments.
The engine's design includes four cylinders with water cooling and an overhead camshaft (OHC) configuration. This combination optimizes combustion efficiency and contributes to the engine's overall reliability.
Furthermore, the engine's fuel consumption figures reflect the model's focus on efficiency. The Prairie 2.0 M5 Attesa achieves a fuel consumption of 24.5 mpg in the 10/15 mode and an impressive 39.8 mpg in the 60 km/h mode, making it an economical choice for daily commuting.
This array of engine options underscores Nissan's dedication to crafting a vehicle that delivers a harmonious blend of power, efficiency, and reliability. As we explore the various technical aspects of the engine options, we gain a deeper understanding of the Prairie 2.0 M5 Attesa's performance characteristics during its production years.
Dimensions and Sizes
The "1992-1994 Nissan Prairie 2.0 M5 Attesa" boasts a well-considered set of dimensions and sizes that contribute to its functionality and versatility. Designed with careful attention to both exterior and interior aspects, this model delivers a balanced driving experience.With an exterior length of 435 cm and a width of 169 cm, the Prairie 2.0 M5 Attesa presents a compact yet accommodating profile. This design aids in maneuvering through urban environments and parking in tight spaces while offering ample interior space for passengers and cargo.
The exterior height of 165 cm ensures that the vehicle maintains a sleek and streamlined appearance, contributing to both aesthetics and aerodynamics. Inside, the interior length of 179.5 cm provides comfortable legroom for passengers, while the interior width of 149 cm allows for a spacious and welcoming atmosphere.
In terms of height, the interior reaches 121 cm, offering sufficient headroom for passengers to sit comfortably. The wheelbase of 259.5 cm strikes a balance between stability and agility, enhancing the vehicle's overall handling.
The Prairie 2.0 M5 Attesa's well-calibrated dimensions extend to the axle lengths as well. The front axle measures 146 cm, while the rear axle spans 143 cm, contributing to the vehicle's stability and road grip.
With a ride height of 17 cm, the Prairie 2.0 M5 Attesa provides ample ground clearance to navigate various road conditions. The model's weight of 1340 kg complements its size, contributing to a responsive and controlled driving experience.
As we delve into the dimensions and sizes of the Prairie 2.0 M5 Attesa, it becomes clear that Nissan has engineered a vehicle that seamlessly blends compactness with interior comfort, all while maintaining the agility necessary for urban driving.
Fuel Tank Capacity
The fuel tank capacity of the "1992-1994 Nissan Prairie 2.0 M5 Attesa" is a crucial specification that influences its practicality and range. With a fuel tank capacity of 15.8 US gallons or 13.1 UK gallons (60 liters), this minivan is well-equipped to cover considerable distances between refueling stops.This substantial fuel tank capacity aligns with the Prairie 2.0 M5 Attesa's emphasis on efficiency and convenience. With the ability to hold a significant amount of fuel, drivers can enjoy extended journeys without frequent stops at the gas station.
Whether embarking on long road trips or navigating through urban environments, the Prairie 2.0 M5 Attesa's fuel tank capacity contributes to its appeal as a versatile and capable vehicle. This capacity enables drivers to make the most of their driving experience, allowing for seamless travel without the constant concern of refueling.
Fuel Consumption
The fuel consumption figures of the "1992-1994 Nissan Prairie 2.0 M5 Attesa" play a significant role in its overall appeal, emphasizing both efficiency and economy. The Prairie 2.0 M5 Attesa is designed with a focus on delivering a balanced and economical driving experience.During city driving conditions, the Prairie 2.0 M5 Attesa achieves a fuel consumption rate of approximately 24.5 mpg in the 10/15 mode. This figure underscores its suitability for urban commutes, where stop-and-go traffic is common. The model's ability to navigate through city streets while maintaining efficient fuel consumption aligns with modern driving demands.
On the open road, the Prairie 2.0 M5 Attesa shines with impressive fuel efficiency. The vehicle achieves a fuel consumption rate of approximately 39.8 mpg in the 60 km/h mode. This exceptional figure reflects the Prairie 2.0 M5 Attesa's capability to cover long distances with minimal fuel consumption, making it an appealing option for those seeking economical travel.
Nissan's commitment to optimizing fuel efficiency is evident in these consumption figures. The Prairie 2.0 M5 Attesa's ability to balance power, performance, and economy makes it a compelling choice for drivers who prioritize both practicality and savings at the pump.
Fuel Efficiency (MPG)
The "1992-1994 Nissan Prairie 2.0 M5 Attesa" showcases its commitment to fuel efficiency with its impressive miles per gallon (MPG) ratings. These ratings highlight the vehicle's ability to cover distances while conserving fuel, aligning with the needs of drivers seeking economical options.During city driving, the Prairie 2.0 M5 Attesa achieves a fuel efficiency rating of approximately 24.5 mpg in the 10/15 mode. This figure reflects the model's capability to navigate urban environments with efficiency, making it suitable for daily commutes and local errands.
On the highway, the Prairie 2.0 M5 Attesa further excels in fuel efficiency, achieving an approximate rating of 39.8 mpg in the 60 km/h mode. This outstanding figure underscores the vehicle's capability to deliver extended mileage on longer journeys, reducing the need for frequent refueling.
These fuel efficiency ratings underscore Nissan's dedication to crafting vehicles that prioritize economy without compromising on performance. The Prairie 2.0 M5 Attesa's ability to strike a balance between power and efficiency makes it a noteworthy choice for drivers seeking to optimize their fuel consumption without sacrificing driving experience.
Trim Levels
The "1992-1994 Nissan Prairie 2.0 M5 Attesa" was available in a range of distinctive trim levels, each catering to specific preferences and requirements of drivers during that era. These trim levels offer varying sets of features and amenities, allowing drivers to choose the one that best suits their needs.The diverse trim options enhance the Prairie 2.0 M5 Attesa's versatility, ensuring that drivers can find a version that aligns with their priorities, whether it's technology, comfort, or performance.
Nissan's attention to detail is evident in the range of trim levels, which showcase the brand's commitment to providing drivers with a tailored driving experience. Each trim level encapsulates a unique combination of features, allowing drivers to select the one that resonates with their preferences and lifestyle.
The availability of multiple trim levels reflects Nissan's dedication to catering to a broad spectrum of customers, ensuring that each driver can find a Prairie 2.0 M5 Attesa that meets their specific requirements and preferences.
Transmission Options
The "1992-1994 Nissan Prairie 2.0 M5 Attesa" offers drivers a seamless and engaging driving experience through its range of transmission options. The availability of transmission choices underscores Nissan's commitment to accommodating diverse driving preferences.At the heart of the Prairie 2.0 M5 Attesa's transmission options lies a 5-speed manual gearbox, contributing to the vehicle's dynamic performance. The manual transmission allows drivers to take control of gear changes, enhancing the overall driving engagement and responsiveness.
Nissan's decision to offer a manual transmission aligns with the Prairie 2.0 M5 Attesa's versatile nature, making it suitable for various driving scenarios. The manual gearbox provides drivers with the flexibility to optimize gear shifts based on road conditions and personal driving style.
By offering manual transmission as a viable option, the Prairie 2.0 M5 Attesa caters to drivers who prioritize a hands-on approach to driving. This transmission option not only enhances the vehicle's performance but also connects drivers to the road, contributing to an enriched driving experience.
Wheel Options
The "1992-1994 Nissan Prairie 2.0 M5 Attesa" offers a selection of wheel options that contribute to both its visual appeal and overall performance. The available wheel choices underscore Nissan's dedication to providing drivers with customizable features that align with their preferences.Equipped with appropriately sized wheels, the Prairie 2.0 M5 Attesa strikes a balance between aesthetics and functionality. The wheel options are designed to complement the vehicle's dimensions, enhancing its exterior appearance and ensuring a smooth and controlled ride.
The Prairie 2.0 M5 Attesa's wheel options are a reflection of Nissan's commitment to delivering a well-rounded driving experience. Whether drivers prioritize a sleek appearance or seek enhanced road grip, the available wheel options allow them to tailor the vehicle to their individual preferences.
By offering a range of wheel choices, Nissan ensures that the Prairie 2.0 M5 Attesa not only meets performance expectations but also provides drivers with the opportunity to make a personal statement through their vehicle's design. The carefully selected wheel options serve as a testament to Nissan's dedication to both form and function.
Generation Overview
The "1992-1994 Nissan Prairie 2.0 M5 Attesa" represents a pivotal period in Nissan's automotive evolution. This generation's production span, from February 1992 to August 1994, encapsulates the brand's commitment to innovation and design excellence.During this era, Nissan focused on crafting vehicles that catered to a wide range of driving needs and preferences. The Prairie 2.0 M5 Attesa emerged as a response to the demands of the time, offering a blend of efficiency, performance, and practicality.
As a member of the Prairie family, the Prairie 2.0 M5 Attesa inherited the legacy of its predecessors while introducing modern features and capabilities. Nissan's dedication to delivering vehicles that are both versatile and reliable is evident in this generation, as the Prairie 2.0 M5 Attesa stands as a testament to the brand's commitment to evolving with the automotive landscape.
With its distinctive features, efficient engine options, and thoughtful design, the Prairie 2.0 M5 Attesa remains a noteworthy representation of Nissan's approach to creating vehicles that resonate with drivers' needs. As we delve into the generation overview, we gain a deeper appreciation for the Prairie 2.0 M5 Attesa's role in shaping Nissan's legacy during this period.
Notable Features
The "1992-1994 Nissan Prairie 2.0 M5 Attesa" distinguishes itself with a range of notable features that contribute to its appeal and practicality. These features encompass various aspects of the vehicle, catering to both driver and passenger needs.One of the standout features of the Prairie 2.0 M5 Attesa is its 4WD drivetrain. This traction-enhancing system ensures stability and control, particularly in diverse road conditions. Whether navigating through rain or venturing onto unpaved paths, the 4WD system offers enhanced traction and confidence.
The inclusion of a 5-speed manual transmission provides a dynamic driving experience, allowing drivers to engage with the vehicle's power output and shift gears to their preference. This transmission choice aligns with the Prairie 2.0 M5 Attesa's focus on offering an engaging and personalized driving experience.
Inside the cabin, the Prairie 2.0 M5 Attesa boasts spaciousness and comfort. With seating for five passengers and a thoughtfully designed interior, the vehicle ensures a comfortable and convenient journey. The inclusion of power windows and standard power steering further enhances the driving convenience.
Additionally, the Prairie 2.0 M5 Attesa offers a variety of safety features, including side impact bars and 3-point safety belts, contributing to a secure driving environment for both driver and passengers.
These notable features collectively contribute to the Prairie 2.0 M5 Attesa's identity as a versatile and well-rounded vehicle. By integrating technology, safety, and performance features, Nissan aims to provide drivers with a comprehensive driving experience that meets modern expectations.
Interior Space
The "1992-1994 Nissan Prairie 2.0 M5 Attesa" offers a thoughtfully designed interior space that prioritizes comfort and convenience for both driver and passengers. The careful attention to interior layout and dimensions ensures a pleasant driving experience across various scenarios.Inside the Prairie 2.0 M5 Attesa, passengers are greeted with a spacious cabin that accommodates up to five occupants. The generous interior length of approximately 179.5 cm allows for ample legroom, promoting a comfortable atmosphere for long journeys and city commutes alike.
Passenger comfort is further enhanced by the interior width of around 149 cm, offering sufficient space for individuals to sit without feeling cramped. This design aspect ensures that occupants can enjoy a relaxing journey, whether traveling solo or with family and friends.
The interior height, measuring approximately 121 cm, provides passengers with ample headroom, contributing to an open and airy ambiance. The Prairie 2.0 M5 Attesa's interior space is thoughtfully designed to ensure that all passengers can enjoy a comfortable and enjoyable ride.
Nissan's focus on interior space extends beyond passenger seating, as the vehicle also offers practical cargo capacity. With the flexibility to fold down rear seats, the Prairie 2.0 M5 Attesa can accommodate larger items when needed, making it suitable for both daily errands and weekend getaways.
The integration of comfortable dimensions, thoughtful interior layout, and versatile cargo options highlights Nissan's dedication to crafting a well-rounded driving experience within the Prairie 2.0 M5 Attesa's interior.
Performance Metrics
The "1992-1994 Nissan Prairie 2.0 M5 Attesa" demonstrates a well-balanced set of performance metrics that contribute to its versatile nature. These metrics encompass aspects of power, handling, and overall driving experience, showcasing Nissan's commitment to creating a vehicle that excels in various driving scenarios.Equipped with the CA20S engine, the Prairie 2.0 M5 Attesa offers a maximum power output of approximately 92.2 PS or 91 bhp, along with a peak torque of around 145.1 Nm. These performance figures translate to responsive acceleration and the ability to navigate through different road conditions with confidence.
The vehicle's 5-speed manual transmission allows drivers to harness the engine's power effectively, providing precise control over gear changes. This transmission choice contributes to the Prairie 2.0 M5 Attesa's dynamic and engaging driving experience, catering to those who seek a more hands-on approach to driving.
The Prairie 2.0 M5 Attesa's suspension system, featuring transverse link struts at the front and parallel link struts at the rear, contributes to its stable and composed handling. This setup ensures that the vehicle maintains a comfortable ride while offering controlled cornering and road grip.
Additionally, the vehicle's compact dimensions, including its exterior length and width, further enhance its maneuverability and agility, making it suitable for both urban environments and open roads.
The Prairie 2.0 M5 Attesa's performance metrics reflect Nissan's emphasis on delivering a vehicle that offers a balance between power, efficiency, and handling characteristics. As we delve into these metrics, we gain a comprehensive understanding of the Prairie 2.0 M5 Attesa's capabilities on the road.
Conclusion
In conclusion, the "1992-1994 Nissan Prairie 2.0 M5 Attesa" represents a noteworthy chapter in Nissan's automotive history. This minivan, produced between February 1992 and August 1994, encapsulates the brand's commitment to crafting vehicles that cater to diverse driving needs and preferences.With its 4WD drivetrain, the Prairie 2.0 M5 Attesa offers enhanced traction and stability, ensuring confident driving across various terrains. The availability of a 5-speed manual transmission adds an engaging element to the driving experience, allowing enthusiasts to tailor gear shifts to their liking.
The vehicle's interior space is designed with passenger comfort in mind, featuring generous legroom, headroom, and cargo capacity. This thoughtful interior layout caters to both daily commutes and longer journeys.
Performance metrics, including the CA20S engine's power output and torque, combined with the Prairie 2.0 M5 Attesa's handling capabilities, reflect Nissan's dedication to creating a versatile and dynamic driving experience.
Whether navigating city streets or embarking on road trips, the Prairie 2.0 M5 Attesa offers a harmonious blend of features, making it an appealing option for those seeking a well-rounded and efficient minivan. As we look back on this vehicle's production years, we recognize its significance in Nissan's pursuit of delivering vehicles that excel in both form and function.
Frequently Asked Questions (FAQ) about the 1992-1994 Nissan Prairie 2.0 M5 Attesa
What years was the Nissan Prairie 2.0 M5 Attesa produced?
What is the unique feature of the Prairie 2.0 M5 Attesa's drivetrain?
How many seats does the Prairie 2.0 M5 Attesa have?
What type of transmission is available in the Prairie 2.0 M5 Attesa?
What is the engine size of the Prairie 2.0 M5 Attesa?
Can you tell me about the Prairie 2.0 M5 Attesa's fuel efficiency?
What are the notable safety features of the Prairie 2.0 M5 Attesa?
Is the Prairie 2.0 M5 Attesa suitable for urban driving?
What sets the Prairie 2.0 M5 Attesa's interior space apart?
What makes the Prairie 2.0 M5 Attesa's performance noteworthy?
Brian Wong / AuthorBrian Wong is an accomplished automotive journalist and editor with a passion for cars. With over a decade of experience in the industry, he has established himself as a trusted voice in the automotive community. Brian has written extensively about a wide range of topics in the field, from the latest trends in car design to innovative safety features and emerging technologies. As a senior reviews editor, he is responsible for test driving and analyzing the latest cars on the market, providing readers with accurate and objective reviews. His articles are widely read and respected for their depth of knowledge and analysis. Brian is committed to staying at the forefront of the latest developments in the automotive industry, and is dedicated to sharing his expertise and insights with his readers. |