1997 Subaru Legacy Wagon 2.0 TX type S lean burn 4WD Specs

OVERVIEW

With a fuel consumption of 31.7 mpg US - 38.1 mpg UK - 7.4 L/100km, a curb weight of 3450 lbs (1565 kg), the Subaru Legacy Wagon 2.0 TX type S lean burn 4WD has a horizontal opposite 4 cylinder SOHC engine, a Regular gasoline engine EJ20. This engine EJ20 produces a maximum power of 126.7 PS (125 bhp - 93.2 kW) at 5600 rpm and a maximum torque of 176.5 Nm (130.1 lb.ft - 18 kg.m) at 4400 rpm. The engine power is transmitted to the road by the four wheel drive (4WD) with a 5MT gearbox. For stopping power, the Subaru Legacy Wagon 2.0 TX type S lean burn 4WD braking system includes disk brake at the rear and V disk at the front. Stock tire sizes are 195/60 on 15 inch rims at the rear and 195/60 on 15 inch rims at the front. Chassis details - Subaru Legacy Wagon 2.0 TX type S lean burn 4WD has strut rear suspension and strut front suspension for road holding and ride confort.

Add to compare list

- Present
- Option
- Not Present (or Dealer Option)

• Search Car Specs
• Other Legacy Wagon Specs Database

More photos Subaru Legacy Wagon

By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on April 18, 2024

Introduction

Between September 1997 and May 1998, Subaru introduced the Legacy Wagon 2.0 TX Type S Lean Burn 4WD, a noteworthy addition to their lineup. This model garnered attention for its versatile and functional design, coupled with a focus on fuel efficiency and performance. With its 4WD traction, it offered a confident driving experience, especially in varying road conditions.

Powered by a 1994 cm3 engine, coded as EJ20, this wagon delivered a balance of power and economy. The 5-speed manual transmission provided precise control over its performance, adding to the driving enthusiast's appeal. This model embraced a horizontal 4-cylinder SOHC engine configuration, a hallmark of Subaru's engineering.

The exterior dimensions of the Legacy Wagon 2.0 TX Type S Lean Burn 4WD further emphasized its practicality. The well-proportioned exterior, measuring approximately 468 cm in length, 169.5 cm in width, and 149 cm in height, housed an interior designed for comfort and functionality. The cabin offered ample space with dimensions of 195.5 cm in length, 141.5 cm in width, and 119 cm in height. The interior could comfortably accommodate up to five passengers across its two seating rows.

An essential aspect of any vehicle, the fuel tank capacity stood at a respectable 15.8 US gallons (60 L), which contributed to this model's commendable fuel economy. While its official fuel consumption was recorded at 31.7 mpg in the US or 38.1 mpg in the UK (7.4 L/100km) according to the 10/15 mode test, the actual fuel efficiency may vary based on driving conditions and habits.

The Legacy Wagon 2.0 TX Type S Lean Burn 4WD combined its practicality with a set of safety features, including standard driver's airbags and ABS. Notably, this model did not feature passengers' airbags or side airbags.

As a member of the Subaru Legacy family, the 2.0 TX Type S Lean Burn 4WD showcased Subaru's commitment to producing vehicles that cater to a range of needs, from performance enthusiasts to those seeking fuel efficiency and versatility.

Engine Specifications

At the heart of the 1997-1998 Subaru Legacy Wagon 2.0 TX Type S Lean Burn 4WD lies a distinctive EJ20 engine, setting the tone for performance and efficiency. This engine, with a displacement of 1994 cm3, showcases Subaru's commitment to engineering excellence.

Designed with a horizontal 4-cylinder SOHC layout, the EJ20 engine strikes a balance between power delivery and fuel efficiency. This configuration is emblematic of Subaru's renowned Boxer engine design, characterized by its low center of gravity and smooth operation. The engine, code-named EJ20, is synonymous with Subaru's dedication to producing reliable powertrains.

Generating a maximum power output of 126.7 PS (125 bhp) or 93.2 kW at 5600 rpm, the EJ20 delivers a performance that's well-suited for daily driving and beyond. Its impressive torque output of 176.5 Nm (130.1 lb.ft) at 4400 rpm ensures responsive acceleration and a satisfying driving experience.

The engine's compatibility with regular gasoline showcases its accessibility and cost-effectiveness. Additionally, the lean burn technology incorporated into the engine's design underscores Subaru's commitment to improving fuel efficiency and reducing emissions.

Mated to a 5-speed manual transmission, the EJ20 engine offered drivers the control to harness its power effectively. This manual transmission setup added a dynamic dimension to the driving experience, appealing to enthusiasts who relish in the engagement of gear changes.

Incorporating a well-balanced blend of power, economy, and engineering innovation, the EJ20 engine underlines the Legacy Wagon 2.0 TX Type S Lean Burn 4WD as a testament to Subaru's dedication to producing vehicles that excel in both performance and environmental consciousness.

Horsepower and Torque

In the realm of performance, the 1997-1998 Subaru Legacy Wagon 2.0 TX Type S Lean Burn 4WD demonstrates a harmonious interplay between horsepower and torque. These essential metrics define the dynamic capabilities of this vehicle, rendering it a capable and engaging companion on the road.

With its EJ20 engine at the helm, the Legacy Wagon 2.0 TX Type S Lean Burn 4WD boasts a maximum power output of 126.7 PS (125 bhp) or 93.2 kW. This horsepower figure encapsulates the engine's ability to generate force, translating to spirited acceleration and responsive performance. The engine's willingness to deliver power across a range of driving scenarios contributes to its versatility.

Complementing its horsepower prowess, the EJ20 engine produces a maximum torque of 176.5 Nm (130.1 lb.ft) at 4400 rpm. Torque, the rotational force that turns the wheels, enhances the vehicle's ability to tackle inclines, carry heavy loads, and maintain consistent speeds. The torque output of the Legacy Wagon 2.0 TX Type S Lean Burn 4WD aligns with Subaru's emphasis on practicality and effective power delivery.

Together, these metrics harmonize to provide a well-rounded driving experience. The Legacy Wagon 2.0 TX Type S Lean Burn 4WD leverages its horsepower for brisk acceleration, while its torque empowers it to handle diverse driving conditions with ease. This balance between horsepower and torque is a testament to Subaru's engineering finesse and the vehicle's ability to cater to a range of driving preferences and needs.

Transmission Options

The 1997-1998 Subaru Legacy Wagon 2.0 TX Type S Lean Burn 4WD presents a driving experience defined by its transmission options. Offering a 5-speed manual transmission, this model empowers drivers with a direct connection to the road, delivering both control and engagement.

The 5-speed manual transmission serves as a testament to Subaru's commitment to driving enthusiasts. This transmission allows drivers to actively participate in the shifting process, enhancing the overall driving experience. Each gear change becomes a deliberate action, allowing drivers to make the most of the EJ20 engine's power and torque.

The manual transmission's layout ensures that drivers have the ability to select the appropriate gear for various driving scenarios, whether it's navigating city streets or conquering open highways. The tactile nature of a manual transmission complements the Legacy Wagon's character as a versatile vehicle that's equally comfortable in urban environments and on winding roads.

Subaru's decision to offer a manual transmission option for the Legacy Wagon 2.0 TX Type S Lean Burn 4WD underlines the brand's commitment to providing a diverse range of driving experiences. By offering this transmission choice, Subaru caters to drivers who value the engagement and control that a manual gearbox affords, making each journey behind the wheel a rewarding adventure.

Fuel Efficiency

Efficiency takes the spotlight in the 1997-1998 Subaru Legacy Wagon 2.0 TX Type S Lean Burn 4WD, as it strikes a commendable balance between performance and economy. The integration of lean burn technology in its engine design showcases Subaru's commitment to enhancing fuel efficiency and reducing emissions.

This innovative approach pays dividends in the fuel consumption of the Legacy Wagon 2.0 TX Type S Lean Burn 4WD. In the 10/15 mode test, it recorded a fuel consumption of 31.7 mpg in the US, 38.1 mpg in the UK, or 7.4 L/100km. This level of efficiency translates to fewer stops at the fuel pump, allowing drivers to cover more ground while making the most of every gallon.

Subaru's dedication to developing engines that sip fuel judiciously underscores the practicality of this vehicle. The combination of its EJ20 engine and lean burn technology illustrates how technology can be harnessed to achieve optimal fuel efficiency without compromising performance.

This fuel efficiency aligns with the Legacy Wagon's versatile nature, making it well-suited for daily commutes, long drives, and a variety of driving scenarios. As Subaru continues to prioritize environmental consciousness and economy, the Legacy Wagon 2.0 TX Type S Lean Burn 4WD stands as a testament to their engineering prowess in the pursuit of efficient, eco-friendly vehicles.

Fuel Consumption Rates

The fuel consumption rates of the 1997-1998 Subaru Legacy Wagon 2.0 TX Type S Lean Burn 4WD showcase its efficiency in real-world driving conditions. These rates provide valuable insights into how this vehicle performs when it comes to conserving fuel and managing expenses.

In the 10/15 mode test, which simulates a mix of urban and highway driving scenarios, the Legacy Wagon 2.0 TX Type S Lean Burn 4WD demonstrates impressive fuel economy. It achieves a fuel consumption rate of 31.7 mpg in the US, 38.1 mpg in the UK, or 7.4 L/100km. This means that for every 100 kilometers traveled, the vehicle consumes approximately 7.4 liters of fuel.

These consumption rates highlight the benefits of lean burn technology incorporated into the EJ20 engine. Lean burn technology optimizes the air-fuel mixture for combustion, enhancing fuel efficiency without compromising performance. This technology is a testament to Subaru's dedication to engineering solutions that benefit both drivers and the environment.

The fuel consumption rates of the Legacy Wagon 2.0 TX Type S Lean Burn 4WD position it as an economical choice for individuals seeking a vehicle that's conscious of fuel costs. This efficiency contributes to the vehicle's overall practicality, making it a reliable and economical companion for a variety of driving needs.

Fuel Tank Capacity

The 1997-1998 Subaru Legacy Wagon 2.0 TX Type S Lean Burn 4WD is designed to strike a balance between performance and fuel efficiency, and its fuel tank capacity plays a pivotal role in this equation. With a fuel tank capacity of 15.8 US gallons (60 liters), this wagon is equipped to cover substantial distances on a single tank, aligning with its focus on practicality and versatility.

The ample fuel tank capacity enables the Legacy Wagon 2.0 TX Type S Lean Burn 4WD to traverse long stretches of road without frequent refueling stops. Whether navigating urban environments or embarking on extended highway journeys, this model's fuel tank capacity supports uninterrupted travel.

Subaru's emphasis on fuel efficiency further complements the Legacy Wagon's fuel tank capacity. The integration of lean burn technology in the EJ20 engine optimizes fuel consumption, extending the range that can be covered on each tank of fuel. This harmony between efficient engineering and a substantial fuel tank capacity underscores the Legacy Wagon's ability to cater to drivers who seek both performance and economy.

The Legacy Wagon 2.0 TX Type S Lean Burn 4WD's fuel tank capacity is a practical asset that aligns with its role as a reliable and versatile companion for a range of driving scenarios. Whether it's daily commuting or embarking on longer journeys, the balance between capacity and efficiency sets the stage for confident and hassle-free travel.

Dimensions and Sizes

The 1997-1998 Subaru Legacy Wagon 2.0 TX Type S Lean Burn 4WD stands as a testament to Subaru's commitment to engineering vehicles that cater to a range of needs. The dimensions and sizes of this wagon highlight its functional design, providing ample space for passengers and cargo while retaining a compact footprint that's well-suited for urban driving.

With an exterior length of approximately 468 cm and a width of 169.5 cm, the Legacy Wagon strikes a balance between maneuverability and interior space. This size enables drivers to navigate city streets and tight spaces with confidence, while still enjoying the benefits of a roomy interior.

The exterior height of 149 cm complements the vehicle's overall proportions, contributing to its aerodynamic profile and enhancing its visual appeal. The interior dimensions further emphasize the Legacy Wagon's practicality, with an interior length of 195.5 cm, width of 141.5 cm, and height of 119 cm. These measurements translate into comfortable seating arrangements for up to five passengers across two rows.

The Legacy Wagon's wheelbase of 263 cm establishes a stable foundation, contributing to its confident handling characteristics. The front and rear axle lengths of 146 cm and 145.5 cm, respectively, further contribute to the vehicle's stability and balance during various driving maneuvers.

The well-thought-out dimensions of the Legacy Wagon 2.0 TX Type S Lean Burn 4WD extend to its ride height and ground clearance, set at 16.5 cm. This clearance ensures that the vehicle can navigate uneven road surfaces without compromising its undercarriage.

The Legacy Wagon's weight of 1290 kg adds to its overall stability and agility, enabling it to handle various road conditions with ease. The five-door design offers convenient access to both the front and rear compartments, making loading and unloading cargo effortless.

In summary, the dimensions and sizes of the Legacy Wagon 2.0 TX Type S Lean Burn 4WD reflect Subaru's dedication to producing vehicles that excel in both practicality and performance. Whether it's urban driving, long journeys, or accommodating passengers and cargo, this wagon's design caters to a diverse range of driving needs.

Wheel Options

The 1997-1998 Subaru Legacy Wagon 2.0 TX Type S Lean Burn 4WD offers a range of wheel options that contribute to its visual appeal and performance characteristics. These wheel choices enhance the overall aesthetics of the vehicle and, in some cases, may also impact handling and ride comfort.

Equipped with 195/60 R15 tires, the Legacy Wagon's wheel options strike a balance between ride comfort and road grip. These tire dimensions are a practical choice for a vehicle that's designed to accommodate a variety of driving scenarios, from daily commuting to longer journeys.

The 15-inch wheel diameter aligns with the Legacy Wagon's focus on delivering a smooth and comfortable ride. This diameter contributes to absorbing road imperfections and delivering a balanced combination of comfort and stability.

The tire width of 195 mm provides a good compromise between road contact and fuel efficiency. It contributes to stable handling while not sacrificing fuel economy, which aligns with the Legacy Wagon's practical nature.

The Legacy Wagon 2.0 TX Type S Lean Burn 4WD's wheel options are a fusion of style and function. The carefully selected tire dimensions and wheel diameter reflect Subaru's dedication to providing a vehicle that not only looks appealing but also performs reliably in various driving conditions. These choices underline the Legacy Wagon's versatility and its ability to cater to drivers who seek a blend of performance and practicality.

Trim Levels and Features

The 1997-1998 Subaru Legacy Wagon 2.0 TX Type S Lean Burn 4WD comes adorned with distinctive trim levels and an array of features that cater to various preferences and needs. These trim levels allow drivers to select a configuration that aligns with their desired balance of comfort, performance, and convenience.

The "Type S" designation of the Legacy Wagon 2.0 TX Type S Lean Burn 4WD signifies a trim level that emphasizes sportiness and enhanced driving dynamics. This trim level often incorporates features that contribute to a more engaging driving experience, such as sport-tuned suspension or performance-oriented enhancements.

While specific features may vary based on the market and model year, the Legacy Wagon 2.0 TX Type S Lean Burn 4WD typically offers a selection of amenities that elevate the driving experience. These may include power windows and power steering, keyless entry for added convenience, and cruise control to enhance long-distance journeys.

The Legacy Wagon's interior may showcase features like leather seats, power-adjustable front seats, and front seat heaters, further enhancing comfort and convenience for both the driver and passengers. The inclusion of steering wheel-mounted controls adds a touch of practicality to the driving experience.

Safety features often find their place in the Legacy Wagon's trim levels as well. These could include standard driver's airbags and ABS (Anti-Lock Braking System) to provide additional peace of mind on the road.

Ultimately, the trim levels and features of the Legacy Wagon 2.0 TX Type S Lean Burn 4WD underscore Subaru's commitment to providing a well-rounded driving experience. By offering a variety of options, Subaru caters to drivers who seek a vehicle that aligns with their specific preferences, making the Legacy Wagon a versatile choice for a diverse range of drivers.

Generations and Models

The 1997-1998 Subaru Legacy Wagon 2.0 TX Type S Lean Burn 4WD is a distinguished member of Subaru's Legacy lineup, known for its blend of practicality, performance, and innovative engineering. As part of the Legacy family, this particular model falls within a specific generation and offers unique attributes that set it apart.

During the production period spanning from September 1997 to May 1998, the Legacy Wagon 2.0 TX Type S Lean Burn 4WD showcased Subaru's commitment to continually refining their vehicles. This model was engineered to cater to drivers who sought a combination of sporty dynamics, fuel efficiency, and versatility.

This generation of the Legacy Wagon incorporated the "Type S" designation, indicative of a trim level that prioritizes sportiness and enhanced driving experiences. The inclusion of "Lean Burn" technology in its engine highlighted Subaru's dedication to environmental consciousness and efficient fuel consumption.

As a wagon model, the Legacy Wagon 2.0 TX Type S Lean Burn 4WD addressed the needs of drivers who sought ample interior space for passengers and cargo. Its five-door design provided easy access to both the front and rear compartments, catering to practicality and convenience.

Subaru's commitment to providing a diverse lineup was evident in the Legacy Wagon's inclusion, meeting the needs of drivers who valued both performance and economy. This model's unique combination of features and attributes made it a noteworthy choice in the Legacy family, showcasing Subaru's ongoing pursuit of engineering excellence and customer satisfaction.

Conclusion

In the realm of automotive innovation, the 1997-1998 Subaru Legacy Wagon 2.0 TX Type S Lean Burn 4WD stands as a testament to Subaru's commitment to crafting vehicles that seamlessly blend performance, efficiency, and practicality. Throughout its production period, this model showcased the brand's engineering prowess, incorporating features and technologies that catered to a wide array of driver preferences and needs.

From its distinct "Type S" trim level emphasizing sportiness to the integration of lean burn technology within the EJ20 engine for optimal fuel efficiency, the Legacy Wagon 2.0 TX Type S Lean Burn 4WD embodied a harmonious balance between performance and economy. Its design, dimensions, and features spoke to Subaru's dedication to crafting vehicles that adapt effortlessly to various driving scenarios.

The Legacy Wagon's status as a member of the Legacy family and its position within a specific generation further underscored Subaru's commitment to continuous improvement. The inclusion of advanced safety features and amenities enhanced the overall driving experience, meeting the demands of modern drivers seeking both comfort and confidence on the road.

Ultimately, the 1997-1998 Subaru Legacy Wagon 2.0 TX Type S Lean Burn 4WD left an indelible mark on Subaru's legacy of producing vehicles that resonate with a diverse range of drivers. Its blend of innovation, performance, and versatility ensures that it remains a noteworthy choice for those who prioritize a well-rounded driving experience in a vehicle that's thoughtfully engineered to excel in every aspect.

Frequently Asked Questions (FAQ) about the 1997-1998 Subaru Legacy Wagon 2.0 TX Type S Lean Burn 4WD