1991 Toyota Mark II 2.0 Grande Specs

OVERVIEW

With a fuel consumption of 25.2 mpg US - 30.3 mpg UK - 9.3 L/100km, a weight of 2976 lbs (1350 kg), the Toyota Mark II 2.0 Grande has a water cooling 6 cylinder DOHC24 valve engine, a Regular gasoline engine 1G-GE. This engine 1G-GE produces a maximum power of 136.8 PS (135 bhp - 100.6 kW) at 5600 rpm and a maximum torque of 176.5 Nm (130.1 lb.ft - 18 kg.m) at 4400 rpm. The engine power is transmitted to the road by the rear wheel drive (FR) with a 5MT gearbox. For stopping power, the Toyota Mark II 2.0 Grande braking system includes Disk at the rear and Ventilated disk at the front. Chassis details - Toyota Mark II 2.0 Grande has double wishbone coil spring rear suspension and strut coil spring front suspension for road holding and ride confort.

Add to compare list

- Present
- Option
- Not Present (or Dealer Option)

• Search Car Specs
• Other Mark II Specs Database

More photos Toyota Mark II

By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on April 19, 2024

Introduction to the Toyota Mark II 2.0 Grande

The 1991-1996 Toyota Mark II 2.0 Grande, an esteemed member of the Toyota family, represents a notable era in the automotive industry. This elegant sedan, produced from November 1991 to August 1996, embodies a blend of timeless design and dependable performance.

Driving enthusiasts are drawn to the Mark II 2.0 Grande for its rear-wheel-drive (FR) configuration, which provides a dynamic and engaging driving experience. The 5-speed manual transmission gearbox adds a touch of sportiness to the mix, allowing drivers to fully engage with the vehicle's capabilities.

Under the hood, you'll find a 1988 cm³ (121.3 cu-in) engine, known by the code 1G-GE. This powerplant delivers a respectable 136.8 PS (135 bhp) at 5600 rpm, along with a torque output of 176.5 Nm (130.1 lb.ft) at 4400 rpm. It's a water-cooled 6-cylinder DOHC 24-valve engine that runs on regular gasoline.

In terms of dimensions and weight, the Mark II 2.0 Grande boasts an exterior length of 469 cm (184.64 inches), a width of 169.5 cm (66.73 inches), and a height of 140.5 cm (55.31 inches). Inside, passengers enjoy an interior length of 193 cm (75.98 inches), a width of 144.5 cm (56.88 inches), and a height of 117 cm (46.06 inches). The wheelbase stretches to 268 cm (105.51 inches), contributing to stability and cabin space.

The sedan accommodates up to five occupants across its four doors, with a comfortable minimum turning circle of 5 meters for maneuverability. A 17.1 US-gallon fuel tank (14.2 UK gallons or 65 liters) ensures a reasonable driving range.

Suspension-wise, the Mark II 2.0 Grande features a front suspension with strut coil springs and a rear suspension with a double wishbone setup, both paired with coil springs. The vehicle rides on 185/70 R14 87S tires mounted on standard rims.

In terms of exterior and interior features, the Mark II 2.0 Grande offers practicality with power windows, standard power steering, and fog lamps at the front for improved visibility. Safety features include options for airbags and cornering lamps, adding to the overall security of the vehicle.

The Mark II 2.0 Grande caters to various amenities, such as air conditioning, a radio, and options for a CD player and CD changer. It also provides convenience features like keyless entry and cruise control, enhancing the driving experience.

This unique blend of performance, style, and functionality defines the 1991-1996 Toyota Mark II 2.0 Grande, making it a noteworthy choice in its era.

Overview of the Different Model Years

The 1991-1996 Toyota Mark II 2.0 Grande spans several model years, each offering its own unique blend of features and improvements. Let's take an overview of these different model years to understand how this iconic sedan evolved during this period.

1991-1992: The early 1990s marked the debut of the Mark II 2.0 Grande. With its sleek and timeless design, it captured the attention of those seeking a balance between elegance and performance. The 1G-GE engine provided a respectable power output, and the sedan offered a comfortable interior for up to five passengers.

1993-1994: During these years, the Mark II 2.0 Grande continued to build on its reputation for style and reliability. Minor updates and refinements were made to enhance the driving experience, making it an appealing choice in the midsize sedan segment.

1995-1996: As the mid-'90s rolled in, the Mark II 2.0 Grande underwent subtle changes to keep up with evolving automotive standards. These updates primarily focused on interior comfort and technology features. The sedan maintained its reputation for delivering a smooth and enjoyable ride.

Throughout these model years, the Mark II 2.0 Grande remained a rear-wheel-drive sedan with a strong emphasis on performance and style. It catered to drivers who appreciated the timeless design and reliable engineering that Toyota was known for.

The different model years of the Mark II 2.0 Grande offer a snapshot of the evolution of this classic sedan, showcasing Toyota's commitment to providing a well-rounded driving experience for its customers. Whether it was the early '90s or the mid-'90s, the Mark II 2.0 Grande continued to hold its own in the competitive automotive market.

Generations of the Mark II 2.0 Grande

The 1991-1996 Toyota Mark II 2.0 Grande, known for its enduring popularity, belonged to a specific generation within the Mark II lineup. Understanding the generations of the Mark II 2.0 Grande provides insight into its evolution over the years.

X80 Generation (1991-1996): The Mark II 2.0 Grande was part of the X80 generation of the Toyota Mark II, which spanned from 1991 to 1996. This generation marked a significant period for the model, characterized by its distinctive design and reliable performance. The X80 generation emphasized rear-wheel drive (FR) configuration, providing driving enthusiasts with a balanced and engaging experience.

Throughout the X80 generation, the Mark II 2.0 Grande maintained its reputation for a comfortable and spacious interior, accommodating up to five passengers. It offered a variety of features and options, including different trim levels and engine choices, catering to a diverse range of customer preferences.

One notable aspect of the X80 generation was its timeless design, which remained relevant even as automotive styles evolved over the years. The exterior and interior of the Mark II 2.0 Grande showcased Toyota's commitment to craftsmanship and attention to detail.

As the X80 generation progressed, minor updates and refinements were introduced to enhance safety, technology, and overall performance. These improvements ensured that the Mark II 2.0 Grande continued to meet the expectations of its loyal customer base.

The X80 generation of the Toyota Mark II 2.0 Grande represents a significant chapter in the model's history, characterized by its enduring appeal, reliable engineering, and the ability to adapt to changing automotive standards. It remains a testament to Toyota's commitment to delivering quality vehicles to its customers.

Engine Specifications and Options

The heart of the 1991-1996 Toyota Mark II 2.0 Grande lies beneath its stylish exterior, and a closer look at its engine specifications and options reveals the engineering excellence that propelled this sedan.

1G-GE Engine: The primary engine option for the Mark II 2.0 Grande was the 1G-GE, a 6-cylinder DOHC (Double Overhead Cam) powerplant. This engine boasted a displacement of 1988 cm³, providing a balance between performance and efficiency.

Power Output: The 1G-GE engine delivered a maximum power output of approximately 136.8 PS (135 bhp) at 5600 rpm. This translated to a lively and engaging driving experience, ensuring that the Mark II 2.0 Grande was more than just a comfortable sedan—it was a vehicle that could hold its own on the road.

Torque: With a torque output of approximately 176.5 Nm (130.1 lb.ft) at 4400 rpm, the engine offered ample low-end and mid-range torque, contributing to a smooth and responsive acceleration.

Fuel Type: The Mark II 2.0 Grande was designed to run on regular gasoline, making it accessible and cost-effective to fuel.

Fuel Efficiency: When it came to fuel efficiency, the Mark II 2.0 Grande impressed with its ability to deliver reasonable mileage. In the 10/15 mode, it achieved approximately 25.2 mpg US (30.3 mpg UK) or 9.3 L/100km, while the 60 km/h mode pushed the efficiency further to around 44.3 mpg US (53.2 mpg UK) or 5.3 L/100km.

The availability of the 1G-GE engine ensured that the Mark II 2.0 Grande could offer a harmonious blend of power and efficiency, catering to a diverse range of drivers with varying preferences.

With its reliable and well-engineered powertrain, the Mark II 2.0 Grande remained a strong contender in the midsize sedan segment, appealing to those who valued both performance and practicality in their daily drives.

Fuel Tank Capacity for Various Models

When it comes to the 1991-1996 Toyota Mark II 2.0 Grande, one crucial aspect that plays a significant role in its practicality and usability is its fuel tank capacity. This sedan was designed to offer a reasonable range between refueling stops, making it a reliable companion for both daily commuting and longer journeys.

The Mark II 2.0 Grande was equipped with a fuel tank capable of holding approximately 17.1 US gallons (or roughly 14.2 UK gallons, equivalent to about 65 liters) of gasoline. This generous fuel tank capacity allowed drivers to cover respectable distances between visits to the gas station.

With this capacity, the Mark II 2.0 Grande could effectively balance its performance-oriented 1G-GE engine with the need for practicality and convenience. Whether used for city driving or highway cruising, the sedan's fuel tank capacity ensured that drivers could enjoy their time behind the wheel without constantly worrying about refueling.

This feature, combined with the sedan's overall reliability and performance, made the 1991-1996 Toyota Mark II 2.0 Grande a well-rounded choice in the midsize sedan category, appealing to drivers who sought both efficiency and enjoyable driving experiences.

Fuel Consumption Rates for Different Years

Examining the fuel consumption rates for the 1991-1996 Toyota Mark II 2.0 Grande reveals valuable insights into its efficiency over the years. This midsize sedan, known for its performance and practicality, managed to strike a balance between power and fuel economy.

10/15 Mode: In standard driving conditions, the Mark II 2.0 Grande displayed a fuel consumption rate of approximately 25.2 mpg US (30.3 mpg UK) or 9.3 L/100km. This mode represents a mix of city and highway driving, offering a reasonable efficiency level for daily use.

60 km/h Mode: At a constant speed of 60 km/h, the Mark II 2.0 Grande showcased even better fuel efficiency, with consumption rates of around 44.3 mpg US (53.2 mpg UK) or 5.3 L/100km. This mode highlights the sedan's capability to deliver excellent mileage on long highway journeys.

These fuel consumption rates underscore the versatility of the Mark II 2.0 Grande, making it suitable for various driving scenarios. Whether navigating city streets or embarking on extended road trips, this sedan's efficiency played a key role in its appeal to a wide range of drivers.

Over the years of its production, the Mark II 2.0 Grande consistently offered a practical balance between power and fuel economy, aligning with Toyota's reputation for delivering reliable and efficient vehicles.

Fuel Capacity of the 1991-1996 Models

In the realm of midsize sedans, the 1991-1996 Toyota Mark II 2.0 Grande distinguished itself not only with its performance but also with its thoughtful design and practicality, including its fuel capacity. The ability to carry an ample amount of fuel was crucial for drivers seeking long journeys and extended driving range.

The Mark II 2.0 Grande came equipped with a fuel tank that could hold approximately 17.1 US gallons (or about 14.2 UK gallons, equivalent to around 65 liters) of gasoline. This substantial fuel capacity ensured that the sedan could cover considerable distances between refueling stops, enhancing its suitability for various driving scenarios.

Whether used for daily commuting, cross-country road trips, or any other driving needs, the 1991-1996 Toyota Mark II 2.0 Grande offered a practical solution with its well-sized fuel tank. This feature, combined with the sedan's other attributes, made it an appealing choice for drivers who valued both performance and convenience in their vehicles.

Calculating Fuel Average (MPG) for the Mark II

Calculating the fuel average (in miles per gallon, MPG) for the 1991-1996 Toyota Mark II 2.0 Grande is an essential aspect of understanding its efficiency and cost of ownership. This midsize sedan, known for its performance and practicality, offered reasonable fuel economy.

To calculate the MPG for the Mark II 2.0 Grande, you need to consider the fuel consumption rate and the fuel tank capacity:

Step 1: Determine the Fuel Consumption Rate
- The Mark II 2.0 Grande had different fuel consumption rates based on driving conditions:
- In standard driving conditions (10/15 mode), it achieved approximately 25.2 mpg US (30.3 mpg UK) or 9.3 L/100km.
- At a constant speed of 60 km/h, it showcased even better fuel efficiency, with consumption rates of around 44.3 mpg US (53.2 mpg UK) or 5.3 L/100km.

Step 2: Calculate the Range
- Calculate the range of the vehicle based on the fuel tank capacity. For example, with a 17.1 US-gallon fuel tank:
- Range in standard driving conditions: 25.2 mpg * 17.1 gallons = Approximately 431 miles.
- Range at a constant speed of 60 km/h: 44.3 mpg * 17.1 gallons = Approximately 758 miles.

These calculations provide a rough estimate of the Mark II 2.0 Grande's fuel efficiency and the distance it could cover on a full tank of gasoline. It's important to note that real-world driving conditions may vary, but these figures offer valuable insights into the sedan's fuel economy capabilities.

These calculations highlight the versatility of the Mark II 2.0 Grande, making it suitable for both city driving and long highway journeys, all while delivering reasonable fuel efficiency.

Dimensions and Sizes of the Toyota Mark II

Exploring the dimensions and sizes of the 1991-1996 Toyota Mark II 2.0 Grande provides valuable insights into its spacious and practical design. This midsize sedan was crafted with an emphasis on comfort and interior space, making it an attractive choice for drivers and passengers alike.

Exterior Dimensions:
- The Mark II 2.0 Grande boasted an exterior length of 469 cm (184.64 inches), contributing to its presence on the road.
- Its width measured approximately 169.5 cm (66.73 inches), offering ample room for occupants and luggage.
- The sedan's height stood at around 140.5 cm (55.31 inches), providing a balanced profile that combined style and aerodynamics.

Interior Dimensions:
- Inside the Mark II 2.0 Grande, passengers enjoyed a spacious cabin with an interior length of about 193 cm (75.98 inches).
- The width of the interior measured approximately 144.5 cm (56.88 inches), ensuring a comfortable seating arrangement.
- The interior height reached around 117 cm (46.06 inches), allowing passengers to sit comfortably without feeling cramped.
- The sedan's wheelbase extended to 268 cm (105.51 inches), contributing to stability on the road.

Additional Measurements:
- The Mark II 2.0 Grande featured a ground clearance of 15.5 cm (6.1 inches), striking a balance between practicality and road handling.
- The sedan's weight was approximately 1350 kg (2976 lbs), aligning with its midsize category.
- With four doors and seating for up to five passengers, the Mark II 2.0 Grande provided convenience for families and commuters alike.
- It boasted a minimum turning circle of 5 meters, ensuring maneuverability in various driving scenarios.

These dimensions and sizes underscored the sedan's commitment to delivering a comfortable and accommodating driving experience. Whether used for daily commuting, family trips, or long journeys, the 1991-1996 Toyota Mark II 2.0 Grande aimed to provide both space and style for its occupants.

Wheel Options and Sizes for the Grande

The 1991-1996 Toyota Mark II 2.0 Grande offered a range of wheel options and sizes to cater to different preferences and driving needs. These wheels played a significant role in both the sedan's aesthetics and its on-road performance.

Wheel Size: The Mark II 2.0 Grande typically came with wheels featuring a size of 185/70 R14 87S. This specification indicated several key details:
- Tire Width: The width of the tire, represented by "185," provided a balance between stability and grip on the road.
- Aspect Ratio: The aspect ratio of "70" indicated the height of the sidewall as a percentage of the tire's width. A higher aspect ratio often contributed to a smoother ride and improved shock absorption.
- Rim Diameter: The "14" signified the diameter of the wheel rim, which determined the size of the tire that could be fitted onto it.
- Load Index and Speed Rating: The "87S" denoted the load index and speed rating of the tires, indicating their capacity to bear weight and their maximum safe speed.

These wheel specifications were carefully chosen to complement the Mark II 2.0 Grande's performance and handling characteristics. The 14-inch rims provided a balance between comfort and sportiness, while the tire dimensions contributed to both grip and ride quality.

Additionally, the Mark II 2.0 Grande did not feature aluminum disks as part of its wheel options during this period. Instead, it typically came with standard steel rims.

The choice of wheels for the Mark II 2.0 Grande allowed Toyota to strike a balance between style, performance, and comfort, catering to a diverse range of drivers who sought a well-rounded driving experience in a midsize sedan.

Notable Features and Trim Levels

The 1991-1996 Toyota Mark II 2.0 Grande offered a range of notable features and trim levels that contributed to its appeal in the midsize sedan segment. These features enhanced the sedan's comfort, convenience, and overall driving experience, making it a well-rounded choice for various customers.

Notable Features:
1. Power Windows: The Mark II 2.0 Grande was equipped with power windows, adding convenience and ease of use for both the driver and passengers.

2. Power Steering: Power steering came standard, improving maneuverability and reducing the effort required for steering, especially at lower speeds.

3. Tachometer: A tachometer was included in the instrument cluster, allowing the driver to monitor engine speed and make informed driving decisions.

4. Centralized Door Lock: The sedan featured centralized door locking, providing enhanced security and ease of use.

5. Keyless Entry (Option): For added convenience, some trim levels offered keyless entry, allowing drivers to unlock and start the vehicle without removing the key from their pocket or bag.

6. Cruise Control (Option): Cruise control was available as an option, enabling drivers to maintain a steady speed on long highway journeys, reducing fatigue.

Trim Levels: The Mark II 2.0 Grande typically came in various trim levels, each offering a slightly different combination of features and options to cater to different customer preferences. While the specific trim levels may have varied by region, they often included variations in interior materials, upholstery, and additional amenities.

These notable features and trim levels allowed buyers to customize their Mark II 2.0 Grande to meet their specific needs and preferences. Whether prioritizing comfort, convenience, or additional technology, the sedan aimed to offer a tailored experience for its drivers and passengers.

Interior and Exterior Design

The 1991-1996 Toyota Mark II 2.0 Grande stood as a testament to Toyota's commitment to thoughtful design, both inside and out. This midsize sedan was carefully crafted to provide a pleasing balance of aesthetics, comfort, and functionality.

Interior Design:
- The interior of the Mark II 2.0 Grande exuded an air of refinement, with attention to detail evident in every corner. Quality materials and comfortable seating made the cabin a welcoming place for both the driver and passengers.
- The layout of the dashboard and controls was intuitive, ensuring that essential functions were easily accessible and operable. A tachometer, power windows, and power steering were among the interior features designed for convenience.
- The spacious interior dimensions, including ample legroom and headroom, ensured that occupants could travel in comfort, even on longer journeys.

Exterior Design:
- The exterior design of the Mark II 2.0 Grande struck a balance between timeless elegance and a hint of sportiness. Its sleek and well-proportioned body lines contributed to its aerodynamic profile.
- While the sedan maintained a classic four-door layout, its exterior dimensions, including the length, width, and height, were carefully proportioned to enhance both aesthetics and functionality.
- The availability of exterior features such as fog lamps and cornering lamps added not only to the vehicle's visual appeal but also to its safety and visibility, especially in adverse weather conditions.

The attention to both interior and exterior design elements in the Mark II 2.0 Grande showcased Toyota's dedication to creating a well-rounded midsize sedan that appealed to drivers seeking both style and practicality. Whether appreciated from the outside or experienced within the cabin, the design of this vehicle added to its overall appeal.

Performance and Handling Characteristics

The 1991-1996 Toyota Mark II 2.0 Grande was celebrated not only for its comfortable design but also for its commendable performance and handling characteristics. As a midsize sedan, it managed to strike a balance between power and drivability, making it an appealing choice for a broad range of drivers.

1G-GE Engine: At the core of the Mark II 2.0 Grande's performance was the 1G-GE engine, a 6-cylinder DOHC powerplant. With a displacement of 1988 cm³, it delivered a respectable power output of approximately 136.8 PS (135 bhp) at 5600 rpm. This engine provided a satisfying blend of power and efficiency, making the sedan engaging to drive.

Torque: The engine's torque output of approximately 176.5 Nm (130.1 lb.ft) at 4400 rpm contributed to smooth and responsive acceleration. The well-balanced torque curve made it suitable for various driving conditions.

Rear-Wheel Drive (FR) Configuration: The Mark II 2.0 Grande featured a rear-wheel-drive layout, known for its balanced handling characteristics. This configuration offered excellent weight distribution, enhancing stability and cornering capabilities.

Suspension: The sedan's suspension system consisted of a front strut and rear double wishbone setup with coil springs. This combination ensured a comfortable ride while maintaining responsive handling.

Steering: Equipped with power steering, the Mark II 2.0 Grande offered precise and effortless maneuverability, whether navigating city streets or taking on winding roads.

Tire and Wheel Selection: The choice of 185/70 R14 87S tires on 14-inch rims struck a balance between grip and ride comfort, contributing to the sedan's overall handling prowess.

These performance and handling characteristics collectively made the 1991-1996 Toyota Mark II 2.0 Grande an enjoyable and versatile midsize sedan. It catered to drivers who appreciated not only its comfortable interior and exterior design but also its ability to deliver a satisfying driving experience on a variety of road conditions.

Maintenance and Ownership Considerations

Owning a 1991-1996 Toyota Mark II 2.0 Grande involves certain maintenance considerations and ownership factors that contribute to a positive ownership experience. Understanding these aspects is crucial for keeping the sedan in good condition and enjoying hassle-free ownership.

Regular Maintenance: Like any vehicle, the Mark II 2.0 Grande benefits from regular maintenance. This includes routine oil changes, filter replacements, and inspections of vital components such as brakes, tires, and suspension. Following the manufacturer's recommended maintenance schedule is key to ensuring the vehicle's longevity and reliability.

Quality Parts and Service: When servicing or repairing the Mark II 2.0 Grande, using genuine Toyota parts and certified service centers is advisable. Genuine parts are designed to fit and function correctly, ensuring optimal performance and safety.

Fuel and Fluids: Paying attention to the quality of fuel and fluids used in the sedan is important. Using the recommended fuel grade and keeping essential fluids, such as engine oil, coolant, and transmission fluid, at the correct levels and in good condition helps maintain the vehicle's efficiency.

Tire Care: Proper tire maintenance, including regular rotations, balancing, and alignment checks, is essential for even tire wear and optimal handling. Ensuring that tires are properly inflated to the recommended pressures also contributes to fuel efficiency.

Road Conditions: Being mindful of road conditions and driving habits can impact the longevity of the Mark II 2.0 Grande. Avoiding harsh driving behaviors, such as rapid acceleration and abrupt braking, can reduce wear and tear on the vehicle.

Ownership Costs: Consideration of ownership costs, including insurance, taxes, and fuel expenses, is necessary to budget for the sedan's ongoing expenses. Obtaining insurance coverage that suits your needs and budget is a vital aspect of responsible ownership.

Resale Value: Maintaining the Mark II 2.0 Grande in good condition can positively affect its resale value. Keeping service records and addressing any issues promptly can make the sedan more attractive to potential buyers when it's time to sell or trade in.

Overall, ownership of the 1991-1996 Toyota Mark II 2.0 Grande involves a commitment to regular maintenance and responsible driving practices. When properly cared for, this midsize sedan can offer many years of enjoyable and reliable transportation.

Conclusion and Overall Impressions

In conclusion, the 1991-1996 Toyota Mark II 2.0 Grande left a lasting impression in the midsize sedan segment with its blend of style, performance, and practicality. This well-crafted vehicle catered to drivers and passengers seeking a comfortable and engaging driving experience.

The Mark II 2.0 Grande's design, both inside and out, showcased Toyota's commitment to thoughtful and timeless aesthetics. Its spacious interior, well-appointed features, and comfortable seating made it a pleasant place to be for daily commutes and longer journeys.

Under the hood, the 1G-GE engine provided a satisfying balance of power and efficiency, making the sedan versatile for various driving scenarios. Its rear-wheel-drive configuration and well-tuned suspension contributed to enjoyable handling characteristics, ensuring that drivers could confidently navigate different road conditions.

Ownership considerations included regular maintenance, the use of quality parts and service, and responsible driving habits. When cared for properly, the Mark II 2.0 Grande proved to be a reliable and enduring choice, potentially retaining its value over time.

Overall, the 1991-1996 Toyota Mark II 2.0 Grande left a positive mark in the automotive landscape. It appealed to drivers who appreciated a midsize sedan that excelled in both form and function, making it a memorable and satisfying choice in its class.

Frequently Asked Questions About the 1991-1996 Toyota Mark II 2.0 Grande

Toyota Mark II Problems