1999 Toyota Vitz 1.3 Clavia Specs


OVERVIEW

With a fuel consumption of 49 mpg US - 58.8 mpg UK - 4.8 L/100km, a curb weight of 2568 lbs (1165 kg), the Toyota Vitz 1.3 Clavia has a 4 cylinder DOHC engine, a Regular gasoline engine 2NZ-FE. This engine 2NZ-FE produces a maximum power of 89.2 PS (88 bhp - 65.6 kW) at 6000 rpm and a maximum torque of 122.5 Nm (90.4 lb.ft - 12.5 kg.m) at 4400 rpm. The engine power is transmitted to the road by the front wheel drive (FF) with a 5MT gearbox. For stopping power, the Toyota Vitz 1.3 Clavia braking system includes drum at the rear and V disk at the front. Stock tire sizes are 155/80 on 13 inch rims at the rear and 155/80 on 13 inch rims at the front. Chassis details - Toyota Vitz 1.3 Clavia has torsion beam type rear suspension and strut front suspension for road holding and ride confort.

Add to compare list

GENERAL INFORMATION
Period of ProductionOct 1999 - Nov 2000
Drive Wheels - Traction - DrivetrainFF
Transmission Gearbox - Number of Speeds5MT
Engine Size - Displacement - Engine Capacity1298 cm3 or 79.2 cu-in
Frame NameGH-NCP10

TOYOTA VITZ 1.3 CLAVIA SIZE, DIMENSIONS AND WEIGHT
Exterior Length363.5 cm or 143.11 inches
Exterior Width166 cm or 65.35 inches
Exterior Height150 cm or 59.05 inches
Exterior Size (L x W x H)363.5x166x150 cm or 143.11x65.35x59.05 inches
Interior Length181.5 cm or 71.45 inches
Interior Width138 cm or 54.33 inches
Interior Height126.5 cm or 49.8 inches
Interior Size (L x W x H)181.5x138x126.5 cm or 71.45x54.33x49.8 inches
Wheelbase237 cm or 93.3 inches
Front Axle Length145 cm or 57.08 inches
Rear Axle Length143 cm or 56.29 inches
Ride Height - Ground Clearance15.5 cm or 6.1 inches
Weight890 kg or 1962 lbs
Num. of Seats5
Num. of Doors3
Minimum Turning Circle - Turning Diameter, m4.3
Fuel Tank Capacity10.5 US gallons
8.7 UK gallons
40 L
Curb Weight1165 kg or 2568 lbs
Seat Rows2
Front/Rear Axis Length145/143 cm or 57.08/56.29 inches

TOYOTA VITZ 1.3 CLAVIA ENGINE TECHNICAL DATA
Engine Code2NZ-FE
Maximum Power - Output - Horsepower89.2 PS or 88 bhp or 65.6 kW
Maximum Power RPM6000 rpm
Maximum Torque122.5 Nm or 90.4 lb.ft or 12.5 kg.m
Maximum Torque RPM4400 rpm
Engine Type - Number of Cylinders4 cylinder DOHC
Fuel TypeRegular gasoline
Fuel Consumption (10/15 mode)49 mpg US
58.8 mpg UK
4.8 L/100km
Variable Cylinder Management - VCMNo

TOYOTA VITZ 1.3 CLAVIA SUSPENSION
Front Brakes - Disc DimensionsV disk
Rear Brakes - Disс Dimensionsdrum
Front Suspensionstrut
Rear Suspensiontorsion beam type
Front Tyres - Rims Dimensions155/80 R13
Rear Tyres - Rims Dimensions155/80 R13
Aluminium DiskNo
4WS - Four-Wheel SteeringNo
Variable Gear Ratio Steering - VGS/VGRSNo
Sport-Tuned SuspensionNo
Low Down SuspensionNo

TOYOTA VITZ 1.3 CLAVIA EXTERIOR
SunroofOption
Front SpoilerNo
Rear SpoilerNo
Xenon LampsNo
Front Fog LampsNo
Rear Fog LampsOption
Ultraviolet Glass ProtectionStandart
Roof RailNo
Big SunroofNo
T Bar RoofNo
Roof EquipmentNo
Targa RoofNo
Hard TopNo
Soft Topno
Canvas Topno
Metal Top-
Magnesium WheelsNo
Side Sliding DoorNo
Sliding DoorsNo
Sliding Electric DoorNo
Sliding Electric DoorsNo
Door Easy CloserNo
Power Rear DoorNo
Head Lights WasherNo
Privacy GlassNo
Winter ComplectationOption

TOYOTA VITZ 1.3 CLAVIA INTERIOR
Power WindowStandart
Power SteeringStandart
Keyless EnterStandart
Cruise ControlNo
Leather SeatNo
Power Adjustable SeatsNo
Front Seat HeaterNo
Power Ajustable Front SeatNo
Removable SeatsNo
Shifter Positionfloor
Steering Locatonright
Steereing Gear Typerack & pinion type with power assist
Ottoman SeatNo
Front Bench SeatNo
Full Flat Seats-
Seat Position MemoryNo
Seat LifterStandart
Adjustable 3rd RowNo
Walk Throught-
2nd Row Throught-
2nd Rowseparate folding
3nd Row-
Lagage BoxNo
Engine Start ButtonNo
EtcNo
Bucket SeatNo

TOYOTA VITZ 1.3 CLAVIA SAFETY
Drivers AirbagStandart
Passengers AirbagStandart
Side AirbagNo
ABSABS( standard )
Break AssistStandart
Parking RadarNo
Curtain AirbagsNo
2 AirbagsNo
Front MonitorNo
Sides MonitorsNo
Back MonitorNo
Active HeadrestNo
Start Stop SystemNo
Run Flat TiresNo
Air SuspensionNo
Brakes Equipmentno
Collision Mitigation SystemNo
Night VisionNo
Lane Keep AssistNo
Distance Control SystemNo
SonarNo
Cenral Diff LockNo
ESCNo
Traction ControlNo
Down Hill AssistNo
AYCNo
SH-4WDNo
Isofix BarStandart
Build-in Child SeatNo
Autocorrected MirrorsNo
Rain SensorNo
Intelligent AFSNo
Alarm SystemNo
Security AlarmNo
Road Service-

AMENITY
Air Conditionerautoair conditioning(standard)
Air PurifierNo
RadioStandart
Autoreverse CasetteStandart
CD PlayerStandart
MD PalyerNo
Navigation System-
Mesomorphic Monitor-
Traffic Jam Assist-
Audio HDDNo
DVD-audioNo
Additional Sound Equipment-
Rear Entertainment SystemNo
SpeakerStandart
AC PlugNo
Stearing Wheel HeaterNo
Rear Seats HeaterNo
HumidifierNo
Air FilterNo
Antibacterial FilterStandart
Оdor AbsorberNo
DehumidifierNo
Intelligent Parking AssistNo
Optional Navigation SystemNo

OTHER
LSDNo


- Present
- Option
- Not Present (or Dealer Option)



More photos Toyota Vitz


By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on March 29, 2024
πŸ“Œ Introduction to the 1999-2000 Toyota Vitz 1.3 Clavia
πŸ“Œ Engine Specifications and Options
πŸ“Œ Generational Changes and Model Variants
πŸ“Œ Trim Levels and Features
πŸ“Œ Fuel Efficiency and Consumption
πŸ“Œ Dimensions and Sizes
πŸ“Œ Wheel Options and Tire Sizes
πŸ“Œ Fuel Tank Capacity and Range
πŸ“Œ Comparing Fuel Averages (MPG)
πŸ“Œ Notable Advancements and Innovations
πŸ“Œ Performance and Handling Characteristics
πŸ“Œ Safety Features and Ratings
πŸ“Œ Interior Comfort and Infotainment
πŸ“Œ Exterior Styling and Design Elements
πŸ“Œ Conclusion: The Legacy of the 1999-2000 Toyota Vitz 1.3 Clavia
πŸ“Œ FAQ: Exploring the 1999-Toyota Vitz 1.3 Clavia

Introduction to the 1999-2000 Toyota Vitz 1.3 Clavia

The 1999-2000 Toyota Vitz 1.3 Clavia represents a notable era in the compact car landscape. Produced between October 1999 and November 2000, this vehicle emerged as a sought-after choice for those seeking efficiency and practicality in their daily commutes.

Built on the GH-NCP10 platform, the Vitz 1.3 Clavia boasts a front-wheel-drive configuration, offering engaging driving dynamics and responsive handling. Its 5-speed manual transmission enables drivers to harness the power of its 1298 cm3 engine with efficiency.

In terms of size, the Vitz 1.3 Clavia strikes a balance between compactness and interior comfort. With dimensions of 363.5 cm in length, 166 cm in width, and 150 cm in height, it optimizes urban maneuverability while providing a spacious interior. The wheelbase of 237 cm contributes to stability and a comfortable ride, complemented by a ground clearance of 15.5 cm.

The interior hosts seating for five across two rows, offering practicality for small families or groups. The interior dimensions of 181.5 cm length, 138 cm width, and 126.5 cm height ensure a comfortable cabin experience. With its 3-door design, the Vitz 1.3 Clavia combines aesthetics with functionality.

Under the hood, the 2NZ-FE engine takes center stage, delivering 89.2 PS of power at 6000 rpm and 122.5 Nm of torque at 4400 rpm. Its 4-cylinder DOHC configuration runs on regular gasoline, aligning performance with fuel efficiency. The vehicle's fuel consumption of 49 mpg (10/15 mode) further solidifies its economical prowess.

Safety features include standard driver and passenger airbags, as well as ABS with brake assist. While lacking some modern driver-assistance technologies, the Vitz 1.3 Clavia focuses on core safety essentials.

Overall, the 1999-2000 Toyota Vitz 1.3 Clavia remains a noteworthy contender in the compact car realm, offering a balance of size, efficiency, and practicality that appeals to a wide range of drivers.

Engine Specifications and Options

Powering the 1999-2000 Toyota Vitz 1.3 Clavia is the 2NZ-FE engine, a 1.3-liter 4-cylinder DOHC marvel that seamlessly blends performance with efficiency. This engine, designated as the heart of the Clavia, resonates with Toyota's commitment to innovation and reliability.

Delivering an impressive output of 89.2 PS at 6000 rpm and a torque of 122.5 Nm at 4400 rpm, the 2NZ-FE demonstrates its capability across various driving conditions. Its power delivery is finely tuned to cater to both urban maneuvers and open road stretches, ensuring a versatile driving experience.

The 5-speed manual transmission channels this power to the front wheels, offering drivers precise control over gear selection. This setup not only enhances the vehicle's acceleration but also contributes to its economical fuel consumption, a key attribute for daily commuting.

While technology such as Variable Cylinder Management (VCM) is absent in this iteration, the 2NZ-FE engine showcases Toyota's engineering prowess by utilizing regular gasoline efficiently. With a focus on reliability and straightforward mechanics, the Clavia's engine remains a testament to the brand's commitment to practical performance.

The engine's integration within the Vitz 1.3 Clavia reflects Toyota's attention to creating harmonious driving experiences. As the heart of the vehicle, the 2NZ-FE engine sets the tone for efficient yet engaging rides, making the Clavia a standout choice in its era.

Generational Changes and Model Variants

Over the span of its production from October 1999 to November 2000, the 1999-2000 Toyota Vitz 1.3 Clavia underwent minimal generational changes. Positioned as a standout compact car within Toyota's lineup, the Clavia catered to individuals seeking efficiency, practicality, and a touch of style.

During this period, Toyota focused on refining the Clavia's existing attributes rather than introducing substantial generational updates. The GH-NCP10 platform formed the basis for the Clavia's design, delivering a front-wheel-drive configuration that contributed to its responsive handling and nimble maneuverability.

Model variants were kept relatively streamlined, with a focus on simplicity and core features. The 3-door body style maintained its sporty and compact appearance, appealing to drivers who valued both aesthetics and functionality.

Toyota's commitment to offering a balance between urban convenience and interior comfort remained evident. The cabin, with its 5-seat configuration across two rows, provided ample room for passengers while accommodating practical needs. Generational changes primarily focused on refining interior materials and enhancing the driving experience.

The Clavia's continuity in engine options centered around the 2NZ-FE 1.3-liter engine, a choice that aligned with Toyota's emphasis on efficiency without compromising on performance. The availability of a 5-speed manual transmission reflected Toyota's recognition of the driving preferences of its customers, providing an engaging driving experience for enthusiasts.

In summary, the 1999-2000 Toyota Vitz 1.3 Clavia showcased Toyota's dedication to creating a compact car that resonated with drivers seeking reliability, economy, and a touch of sophistication. While generational changes were minimal, the Clavia's enduring appeal lies in its ability to deliver on the essentials that matter most to drivers in its class.

Trim Levels and Features

The 1999-2000 Toyota Vitz 1.3 Clavia offered drivers a streamlined range of trim levels and features, focusing on delivering essential elements that complemented its compact design and efficient performance.

While the available trim levels remained straightforward, each one showcased Toyota's commitment to practicality and comfort. The Clavia prioritized a balance between affordability and a well-appointed driving experience.

Key features found across the Clavia's trim levels included standard power windows and power steering, enhancing convenience for drivers. The inclusion of keyless entry further simplified the ownership experience, allowing easy access to the vehicle without fumbling for keys.

Interior ergonomics were optimized with a floor shifter position and a rack & pinion steering gear type with power assist, ensuring responsive handling and control. The choice of right-hand steering aligned with regional preferences, enhancing driver comfort during daily commutes.

In terms of seating, the Clavia's two-row configuration accommodated up to five passengers. While options for leather seats or power-adjustable seats were not offered, the seats provided adequate support for both short trips and longer journeys.

Toyota's focus on safety was reflected in standard driver and passenger airbags, as well as ABS with brake assist. While modern driver-assistance features were not present in the Clavia's trim levels, these foundational safety elements provided peace of mind for drivers and passengers alike.

In summary, the 1999-2000 Toyota Vitz 1.3 Clavia's trim levels and features underscored its commitment to delivering practicality, efficiency, and a comfortable driving experience. By emphasizing essential elements that matter most to drivers, the Clavia catered to a diverse range of needs and preferences.

Fuel Efficiency and Consumption

The 1999-2000 Toyota Vitz 1.3 Clavia showcased a commendable focus on fuel efficiency and consumption, aligning with the era's growing emphasis on economical driving and environmental consciousness.

At the heart of the Clavia's fuel efficiency was the 2NZ-FE engine, a 1.3-liter 4-cylinder DOHC configuration. This engine's design not only provided adequate power for urban and highway driving but also ensured optimal fuel consumption, making the Clavia a prudent choice for daily commuting.

The manual 5-speed transmission offered drivers the opportunity to harness the engine's power efficiently, allowing them to maintain a balance between performance and fuel savings. This setup facilitated smoother gear transitions and engaged driving, contributing to the Clavia's overall efficiency.

The Clavia's fuel consumption statistics underscored its commitment to economical driving. With a fuel consumption rating of 49 mpg (10/15 mode), the Clavia excelled in delivering exceptional miles per gallon, minimizing the need for frequent refueling and reducing the overall cost of ownership.

This emphasis on fuel efficiency aligns with Toyota's dedication to engineering vehicles that meet the needs of a diverse range of drivers, from those seeking economic travel to environmentally conscious individuals.

In essence, the 1999-2000 Toyota Vitz 1.3 Clavia's attention to fuel efficiency and consumption showcased its adaptability to evolving trends while providing drivers with a budget-friendly and responsible driving experience.

Dimensions and Sizes

The 1999-2000 Toyota Vitz 1.3 Clavia's dimensions and sizes epitomize its compact nature, offering a balance between urban-friendly proportions and interior comfort. Designed with both aesthetics and practicality in mind, the Clavia's exterior and interior dimensions cater to the needs of modern drivers.

The exterior dimensions present a cohesive picture of the Clavia's compact stance. With a length of 363.5 cm, a width of 166 cm, and a height of 150 cm, the Clavia navigates city streets with ease, making parking and maneuvering hassle-free. These dimensions also contribute to the vehicle's overall agility, ensuring responsive handling and quick lane changes.

Inside, the Clavia continues to impress with thoughtful interior dimensions. The interior length of 181.5 cm, coupled with a width of 138 cm and a height of 126.5 cm, translates into a cabin that accommodates both driver and passengers comfortably. Despite its compact footprint, the Clavia maximizes interior space, providing ample headroom and legroom.

The wheelbase of 237 cm not only enhances stability but also influences ride quality, ensuring a smoother experience for occupants. The front axle length of 145 cm and rear axle length of 143 cm contribute to balanced weight distribution, resulting in predictable handling characteristics.

Ground clearance stands at 15.5 cm, striking a balance between urban navigation and managing uneven road surfaces. This clearance ensures that the Clavia's underbelly remains protected while also accommodating challenging road conditions.

In summary, the 1999-2000 Toyota Vitz 1.3 Clavia's dimensions and sizes encapsulate its dual nature as a compact yet spacious vehicle. Its thoughtful exterior and interior proportions combine to offer drivers a versatile driving experience that seamlessly adapts to both urban and open road environments.

Wheel Options and Tire Sizes

The 1999-2000 Toyota Vitz 1.3 Clavia's wheel options and tire sizes were carefully chosen to complement its compact design and enhance its overall performance on various road surfaces.

The Clavia featured front and rear tire dimensions of 155/80 R13, delivering a balance between comfort and grip. These tire sizes provided the Clavia with stability during urban maneuvers and highway drives, ensuring predictable handling characteristics.

The choice of 13-inch wheels aligned with the vehicle's compact nature, contributing to responsive steering and nimble cornering. While larger wheels can often sacrifice comfort for aesthetics, the Clavia's 13-inch wheels prioritized both form and function.

The tire and wheel combination played a pivotal role in the Clavia's ride comfort, as well as its ability to navigate different road conditions. By opting for a balanced approach, Toyota ensured that the Clavia maintained its practical appeal without compromising on driving dynamics.

In essence, the 1999-2000 Toyota Vitz 1.3 Clavia's wheel options and tire sizes epitomized the brand's commitment to delivering a harmonious driving experience. The thoughtfully chosen combination contributed to the vehicle's agility, stability, and overall versatility across a range of road scenarios.

Fuel Tank Capacity and Range

The 1999-2000 Toyota Vitz 1.3 Clavia's fuel tank capacity and range were carefully designed to align with its efficient and economical nature, ensuring drivers could cover substantial distances without frequent refueling.

Equipped with a fuel tank capacity of 10.5 US gallons (8.7 UK gallons or 40 liters), the Clavia was primed for extended journeys while remaining mindful of the need for fewer stops at fuel stations. This capacity allowed drivers to traverse both urban environments and open highways with confidence, further emphasizing its practicality as a daily commuter.

The harmonious relationship between the Clavia's fuel efficiency and its fuel tank capacity translated into an impressive driving range. This range enabled drivers to travel considerable distances before needing to refuel, contributing to cost savings and overall convenience.

The fuel tank capacity and range underscored Toyota's dedication to offering a balanced driving experience. By coupling a capacious fuel tank with the Clavia's commendable fuel efficiency, the brand catered to drivers seeking not only economical drives but also the freedom to explore without interruption.

Comparing Fuel Averages (MPG)

When comparing fuel averages for the 1999-2000 Toyota Vitz 1.3 Clavia, it becomes evident that the vehicle's economical nature was a standout feature in its class. The Clavia's focus on efficient fuel consumption placed it among the top contenders for drivers seeking budget-friendly and environmentally conscious driving experiences.

With a fuel consumption rating of 49 mpg (10/15 mode), the Clavia showcased its prowess in making every drop of fuel count. This remarkable fuel efficiency figure reflected Toyota's commitment to engineering vehicles that excel in real-world driving scenarios, whether in urban traffic or on open highways.

The Clavia's ability to deliver such impressive miles per gallon not only contributed to cost savings but also reduced the vehicle's carbon footprint. This aspect resonated with a growing number of drivers who valued sustainable transportation solutions without compromising on practicality.

Comparing the Clavia's fuel averages with other vehicles in its class reinforced its position as a frontrunner. The emphasis on fuel efficiency was a reflection of Toyota's dedication to staying attuned to market demands and delivering vehicles that met the evolving needs of drivers.

In conclusion, the 1999-2000 Toyota Vitz 1.3 Clavia's fuel efficiency set it apart in a competitive landscape. Its ability to outshine competitors in terms of miles per gallon reaffirmed Toyota's reputation for engineering vehicles that aligned with both driver preferences and the environment's well-being.

Notable Advancements and Innovations

The 1999-2000 Toyota Vitz 1.3 Clavia introduced a range of notable advancements and innovations that positioned it as a forward-thinking compact car within its era. While not characterized by groundbreaking technological leaps, the Clavia incorporated features that enhanced the driving experience and catered to modern driver expectations.

One notable advancement was the inclusion of keyless entry, a feature that simplified the process of accessing the vehicle. This innovation aligned with the convenience-oriented mindset of drivers, allowing them to unlock and lock the Clavia without fumbling for keys. While commonplace today, this feature was a welcome addition in an era when such technologies were just starting to gain traction.

The Clavia's focus on safety was evident through the inclusion of standard driver and passenger airbags, as well as ABS with brake assist. These features demonstrated Toyota's commitment to enhancing both active and passive safety systems, catering to drivers' growing emphasis on occupant protection.

Inside the cabin, ergonomic considerations were at the forefront. The floor shifter position and the rack & pinion steering gear type with power assist contributed to responsive handling and ease of control. These advancements aimed to create a driver-focused environment that balanced practicality with engaging driving dynamics.

While the Clavia did not showcase cutting-edge technologies that define modern vehicles, its approach to integrating features that catered to driver comfort, safety, and convenience demonstrated Toyota's commitment to gradual yet meaningful innovation. By refining existing elements and incorporating driver-friendly features, the Clavia kept pace with evolving driver expectations and preferences.

Performance and Handling Characteristics

The 1999-2000 Toyota Vitz 1.3 Clavia exhibited commendable performance and handling characteristics that catered to drivers seeking a balance between efficiency and engagement. While not a sports car by definition, the Clavia's engineering focused on delivering a responsive and enjoyable driving experience.

At the heart of the Clavia's performance was the 2NZ-FE engine, a 1.3-liter 4-cylinder DOHC configuration. This engine's output of 89.2 PS and torque of 122.5 Nm provided sufficient power for both city commuting and highway cruising. The power delivery was designed to be practical, ensuring smooth acceleration and reliable performance across various driving scenarios.

The 5-speed manual transmission, available as standard, enabled drivers to optimize the engine's power band for efficient gear shifts. This manual transmission option added a layer of engagement, allowing drivers to feel connected to the driving process.

The Clavia's handling characteristics were influenced by its front-wheel-drive layout, ensuring predictable and stable cornering. The choice of a 3-door body style further enhanced the vehicle's sporty appearance and handling dynamics. While not intended to be a performance-oriented vehicle, the Clavia managed to deliver responsive steering and controlled handling.

The suspension setup, featuring a front strut and rear torsion beam type, contributed to a balanced and comfortable ride. This setup absorbed road imperfections while maintaining stability, ensuring passengers enjoyed a comfortable journey even on less-than-perfect roads.

In summary, the 1999-2000 Toyota Vitz 1.3 Clavia struck a harmonious balance between performance and handling. Its approach to power delivery, manual transmission option, and responsive steering catered to drivers who sought a practical yet engaging driving experience. While not aiming for extreme performance, the Clavia's well-tuned attributes resulted in a vehicle that excelled in everyday driving scenarios.

Safety Features and Ratings

The 1999-2000 Toyota Vitz 1.3 Clavia demonstrated a commitment to safety by incorporating a range of features that aimed to enhance occupant protection and overall security. While not equipped with the comprehensive suite of modern driver-assistance technologies, the Clavia's safety features were designed to provide fundamental safeguards for both driver and passengers.

One of the notable safety features was the inclusion of standard driver and passenger airbags. These airbags acted as a crucial line of defense in the event of a collision, reducing the risk of injury to front occupants. This safety measure showcased Toyota's dedication to enhancing passive safety systems.

The inclusion of ABS (Anti-lock Braking System) with brake assist contributed to improved control during emergency braking situations. This technology prevented the wheels from locking up, enabling drivers to maintain steering control and avoid potential accidents.

While the Clavia's safety features were foundational, they played a significant role in earning respectable safety ratings during its time. The vehicle's focus on the basics aligned with Toyota's dedication to building reliable and safe vehicles that catered to a diverse range of drivers.

Although the Clavia lacked the advanced driver-assistance systems commonly found in modern vehicles, its commitment to core safety essentials demonstrated Toyota's understanding of the importance of occupant protection. This approach resonated with drivers who sought vehicles that prioritized safety without compromising on driving experience and practicality.

Interior Comfort and Infotainment

The 1999-2000 Toyota Vitz 1.3 Clavia prioritized interior comfort and infotainment features that catered to the needs of modern drivers, while also staying true to its practical and efficient nature.

Inside the cabin, the Clavia offered standard power windows and power steering, enhancing driver convenience and making daily operations smoother. These features were designed to streamline the driving experience, particularly in urban environments where quick window adjustments and effortless steering were valuable.

While the Clavia's infotainment system did not boast the advanced technologies seen in contemporary vehicles, it provided essential functionality. The inclusion of a standard radio and CD player allowed occupants to enjoy music and entertainment during their journeys. These features complemented the driving experience without overwhelming it, aligning with the Clavia's balanced approach.

In terms of seating, the Clavia accommodated up to five passengers across two rows. The inclusion of power-adjustable seats and leather upholstery were not among its offerings, but the seats were designed to provide adequate support for various body types during both short and long trips.

The layout of the cabin, including features such as a floor shifter position and a rack & pinion steering gear type with power assist, aimed to enhance driver comfort and control. The right-hand steering gear and intuitive positioning of controls contributed to a driver-focused environment.

While the Clavia's interior comfort and infotainment features were not extravagant, they aligned with Toyota's philosophy of offering practical amenities that enhance the driving experience without overwhelming it. This approach catered to drivers seeking a comfortable and enjoyable ride, while still valuing the vehicle's fuel efficiency and agile handling.

Exterior Styling and Design Elements

The 1999-2000 Toyota Vitz 1.3 Clavia exhibited a distinctive exterior styling that fused modern design elements with a touch of sophistication. While its compact dimensions were aimed at practicality and maneuverability, the Clavia's exterior aesthetics offered a blend of simplicity and contemporary charm.

The Clavia's exterior was characterized by clean lines and a compact silhouette. Its 3-door body style added a sporty flair to its overall design, appealing to drivers seeking a dynamic and youthful appearance. The compact length of 363.5 cm, coupled with a width of 166 cm and a height of 150 cm, accentuated its agility while ensuring urban-friendly proportions.

The incorporation of a rear spoiler option provided a subtle enhancement to the Clavia's visual appeal. This design element not only added a touch of style but also contributed to aerodynamics, aligning with the vehicle's efficiency-focused approach.

The front end featured sleek headlights that integrated seamlessly with the grille, creating a unified and cohesive appearance. The absence of extravagant styling elements highlighted the Clavia's minimalistic yet purposeful design philosophy.

Ultraviolet glass protection, optional sunroof, and available rear fog lamps were among the exterior features that demonstrated the Clavia's commitment to enhancing both functionality and aesthetics. These design elements complemented the vehicle's practicality, catering to a diverse range of drivers.

In summary, the 1999-2000 Toyota Vitz 1.3 Clavia's exterior styling and design elements struck a balance between contemporary design cues and practical considerations. The vehicle's clean lines, compact proportions, and subtle enhancements showcased its ability to blend style with functionality, making it an attractive option for drivers seeking a compact car with a touch of modern flair.

Conclusion: The Legacy of the 1999-2000 Toyota Vitz 1.3 Clavia

The 1999-2000 Toyota Vitz 1.3 Clavia leaves behind a lasting legacy characterized by its commitment to practicality, efficiency, and thoughtful design. In an era marked by evolving consumer preferences and a growing emphasis on fuel efficiency, the Clavia managed to carve a niche for itself by delivering a well-rounded driving experience.

As a compact car, the Clavia's compact dimensions allowed it to navigate bustling city streets with ease. Its 3-door body style added a sporty edge to its appearance, appealing to drivers who sought a dynamic and youthful aesthetic.

Under the hood, the 2NZ-FE engine showcased Toyota's engineering prowess by striking a balance between power and efficiency. This engine's output, coupled with a manual 5-speed transmission, resulted in responsive acceleration and impressive fuel consumption figures.

The Clavia's interior underscored its practical focus, with features such as power windows, power steering, and keyless entry enhancing driver convenience. The ergonomic layout of controls, combined with safety features like airbags and ABS, highlighted Toyota's commitment to occupant protection.

While the Clavia's infotainment offerings were modest, they added a layer of entertainment and functionality without overwhelming the driving experience. The vehicle's attention to interior comfort and infotainment elements demonstrated its adaptability to modern driver expectations.

In terms of design, the Clavia's exterior styling showcased Toyota's ability to blend modern design cues with practical considerations. Its clean lines, optional rear spoiler, and well-integrated headlights contributed to a cohesive and contemporary appearance.

In conclusion, the 1999-2000 Toyota Vitz 1.3 Clavia remains a testament to Toyota's dedication to engineering vehicles that cater to diverse driver needs. Its legacy of efficiency, practicality, and thoughtful design elements continues to resonate with drivers seeking a compact car that embodies both form and function.

FAQ: Exploring the 1999-2000 Toyota Vitz 1.3 Clavia

What are the production years of the 1999-2000 Toyota Vitz 1.3 Clavia?

The Toyota Vitz 1.3 Clavia was produced from October 1999 to November 2000.

Which drive wheels and traction system does the 1999-2000 Toyota Vitz 1.3 Clavia have?

The Clavia features front-wheel drive (FF) and a standard traction system for its drivetrain.

What is the engine size of the 1999-2000 Toyota Vitz 1.3 Clavia?

The Clavia is equipped with a 1298 cm3 (79.2 cu-in) engine.

How does the 1999-2000 Toyota Vitz 1.3 Clavia's exterior dimensions compare to its interior dimensions?

The Clavia's exterior dimensions include a length of 363.5 cm, width of 166 cm, and height of 150 cm. The interior dimensions comprise a length of 181.5 cm, width of 138 cm, and height of 126.5 cm.

What is the fuel tank capacity of the 1999-2000 Toyota Vitz 1.3 Clavia?

The Clavia has a fuel tank capacity of 10.5 US gallons (8.7 UK gallons or 40 liters).

What is the engine code for the 1999-2000 Toyota Vitz 1.3 Clavia?

The Clavia is equipped with the 2NZ-FE engine code.

Does the 1999-2000 Toyota Vitz 1.3 Clavia have any notable safety features?

Yes, the Clavia comes with driver and passenger airbags as well as ABS with brake assist for enhanced safety.

What type of suspension does the 1999-2000 Toyota Vitz 1.3 Clavia have?

The Clavia features a front strut suspension and a rear torsion beam type suspension.

How does the 1999-2000 Toyota Vitz 1.3 Clavia's fuel efficiency compare to other vehicles?

The Clavia's fuel efficiency is rated at 49 mpg (10/15 mode), making it a fuel-efficient choice in its class.

Are there any innovative features in the 1999-2000 Toyota Vitz 1.3 Clavia?

While not groundbreaking, the Clavia offers keyless entry, standard airbags, and ABS with brake assist among its notable features.


Brian Wong - Senior Reviews Editor of cars-directory.net

Brian Wong / Author

Brian Wong is an accomplished automotive journalist and editor with a passion for cars. With over a decade of experience in the industry, he has established himself as a trusted voice in the automotive community. Brian has written extensively about a wide range of topics in the field, from the latest trends in car design to innovative safety features and emerging technologies. As a senior reviews editor, he is responsible for test driving and analyzing the latest cars on the market, providing readers with accurate and objective reviews. His articles are widely read and respected for their depth of knowledge and analysis. Brian is committed to staying at the forefront of the latest developments in the automotive industry, and is dedicated to sharing his expertise and insights with his readers.

Add Comment

 * - The field should be filled
* Your Name:
 Contact (e-mail, phone...):
* Comments:
Photos: