2004 Honda Insight 1.0 Specs


OVERVIEW

With a fuel consumption of 75.8 mpg US - 91.1 mpg UK - 3.1 L/100km, a weight of 1873 lbs (850 kg), the Honda Insight 1.0 has a water cooling 3 cylinder SOHC horizontal range + alternating synchronous electric motor engine, a Regular gasoline engine ECA-MF2. This engine ECA-MF2 produces a maximum power of 70.9 PS (70 bhp - 52.1 kW) at 5700 rpm and a maximum torque of 92.1 Nm (67.9 lb.ft - 9.4 kg.m) at 4800 rpm. The engine power is transmitted to the road by the front wheel drive (FF) with a Honda Multi Matic S gearbox. For stopping power, the Honda Insight 1.0 braking system includes fluid drum brake at the rear and hydraulic ventilated disk at the front. Stock tire sizes are 165/65 on 14 inch rims 79S at the rear and 165/65 on 14 inch rims 79S at the front. Chassis details - Honda Insight 1.0 has axle type (torsion beam type) rear suspension and McPherson front suspension for road holding and ride confort.

Add to compare list

GENERAL INFORMATION
Complectation Name1.0
Period of ProductionOct 2004 -
Drive Wheels - Traction - DrivetrainFF
Body TypeCoupe
Transmission Gearbox - Number of SpeedsHonda Multi Matic S
Engine Size - Displacement - Engine Capacity995 cm3 or 60.7 cu-in
Frame NameAAA-ZE1

HONDA INSIGHT 1.0 SIZE, DIMENSIONS AND WEIGHT
Exterior Length394 cm or 155.11 inches
Exterior Width169.5 cm or 66.73 inches
Exterior Height135.5 cm or 53.34 inches
Interior Length88 cm or 34.64 inches
Interior Width139 cm or 54.72 inches
Interior Height109 cm or 42.91 inches
Wheelbase240 cm or 94.48 inches
Front Axle Length143.5 cm or 56.49 inches
Rear Axle Length132.5 cm or 52.16 inches
Ride Height - Ground Clearance15 cm or 5.9 inches
Weight850 kg or 1873 lbs
Num. of Seats2
Num. of Doors2
Minimum Turning Circle - Turning Diameter, m4.8
Fuel Tank Capacity10.5 US gallons
8.7 UK gallons
40 L

HONDA INSIGHT 1.0 ENGINE TECHNICAL DATA
Engine CodeECA-MF2
Maximum Power - Output - Horsepower70.9 PS or 70 bhp or 52.1 kW
Maximum Power RPM5700 rpm
Maximum Torque92.1 Nm or 67.9 lb.ft or 9.4 kg.m
Maximum Torque RPM4800 rpm
Engine Type - Number of Cylinderswater cooling 3 cylinder SOHC horizontal range + alternating synchronous electric motor
Engine Additional InfoVariable valve timing system
Fuel TypeRegular gasoline
Fuel Consumption (10/15 mode)75.8 mpg US
91.1 mpg UK
3.1 L/100km
CVT Ger Ratio2.441
Rear Gear Ratio4.359
Compression Ratio11
Bore7.2 cm or 2.83 inches
Stroke8.2 cm or 3.22 inches

HONDA INSIGHT 1.0 SUSPENSION
Front Brakes - Disc Dimensionshydraulic ventilated disk
Rear Brakes - Disс Dimensionsfluid drum brake
Front SuspensionMcPherson
Rear Suspension axle type (torsion beam type)
Front Tyres - Rims Dimensions165/65 R14 79S
Rear Tyres - Rims Dimensions165/65 R14 79S
Tyres - Rims Dimensions165/65 R14 79S

HONDA INSIGHT 1.0 EXTERIOR
SunroofNo
Tilt SunroofNo
Twin SunroofNo
Front SpoilerNo
Rear SpoilerNo
Power Adjustable Door MirrorsStandart
Xenon LampsNo
Front Fog LampsNo
Rear Fog LampsNo
Cornering LampsNo
Ultraviolet Glass ProtectionStandart
Roof RailNo
Back WiperOption

HONDA INSIGHT 1.0 INTERIOR
Power WindowStandart
Power SteeringStandart
TachometerStandart
Centralized Door LockStandart
Keyless EnterStandart
Right Hand DriveStandart
Left Hand DriveNo
Leather WindingNo
Adjustable SteeringNo
Telescopic SteeringNo
Tilt SteeringNo
Wood PanelNo
Cruise ControlNo
Leather SeatNo
Power Adjustable SeatsNo
Power Ajustable Front SeatNo
Power Ajustable Back SeatNo
Reclining SeatsNo
Removable SeatsNo
Turning SeatsNo

HONDA INSIGHT 1.0 SAFETY
Drivers AirbagStandart
Passengers AirbagStandart
Side AirbagNo
Side Impact BarStandart
TCSNo
Break AssistStandart
Parking RadarNo
Central Power Window ControlStandart
Additional Stop LightStandart
Safety Belt PretensionerStandart
Safety Belt LimiterStandart
3 Point Safety BeltNo
Child Car RestraintsNo
Durable FrameStandart

AMENITY
CoolerNo
Automatic Air ConditioningStandart
Twin Conditioning SystemNo
Air PurifierNo
RadioNo
Autoreverse CasetteNo
CD PlayerNo
CD ChangerNo
MD PalyerNo
MD ChangerNo

OTHER
LSDNo
Front StabilizerStandart
Rear StablilizerNo
Special Equipment Honda IMA system (hybrid system) (standard equipment)


- Present
- Option
- Not Present (or Dealer Option)




By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on March 29, 2024
πŸ“Œ Introduction
πŸ“Œ Model Overview
πŸ“Œ Engine Specifications
πŸ“Œ Fuel Efficiency
πŸ“Œ MPG Ratings
πŸ“Œ Dimensions and Sizes
πŸ“Œ Wheel Details
πŸ“Œ Trim Levels
πŸ“Œ Generations
πŸ“Œ Model Years
πŸ“Œ Conclusion

Introduction

The 2004 Honda Insight 1.0, a compact coupe, emerged as a remarkable hybrid vehicle during its production run. With a focus on fuel efficiency and innovative technology, the Insight garnered attention for its forward-thinking design. This model showcased a Front-Wheel Drive (FF) drivetrain and was distinguished by its Body Type Γ’β‚¬β€œ Coupe. The period of production spanned from October 2004 onwards, bringing forth a car that integrated eco-friendly principles with practicality.

Under the hood, the Honda Insight 1.0 housed an engine with a displacement of 995 cm3. This 3-cylinder engine was supplemented by the Honda Multi Matic S transmission, emphasizing a seamless driving experience. With a lightweight frame named AAA-ZE1, the Insight 1.0 embodied agility and responsiveness.

In terms of dimensions, the Insight 1.0 featured a compact yet ergonomic design. Its exterior dimensions included a length of 394 cm and a width of 169.5 cm, complemented by an exterior height of 135.5 cm. The interior provided ample comfort with a length of 88 cm, a width of 139 cm, and a height of 109 cm.

The car's wheelbase measured at 240 cm, contributing to stability and handling. Weighing in at 850 kg, the Insight 1.0 balanced efficiency with practicality. The interior accommodated two seats across two doors, while boasting a minimum turning circle of 4.8 meters.

Notably, the 2004 Honda Insight 1.0 excelled in fuel efficiency, exemplifying its commitment to sustainability. With a fuel tank capacity of 10.5 US gallons (40 liters), it blended eco-consciousness with convenience. The vehicle's Variable Valve Timing System and Regular gasoline fuel type underscored its engineering sophistication.

The Insight 1.0's exceptional fuel consumption further cemented its eco-friendly status, achieving an impressive 75.8 mpg in the 10/15 mode. The Continuous Variable Transmission (CVT) gear ratio of 2.441 and rear gear ratio of 4.359 contributed to its dynamic performance. Moreover, the car's 3-cylinder SOHC engine was paired with an alternating synchronous electric motor, reflecting Honda's innovative approach.

Overall, the 2004 Honda Insight 1.0 embodied a harmonious blend of advanced engineering and environmental consciousness, setting a precedent for hybrid vehicles of the future.

Model Overview

The 2004 Honda Insight 1.0 emerges as a standout model, bridging the gap between cutting-edge technology and practical driving. Designed as a compact coupe, the Insight embodies Honda's commitment to innovative engineering and eco-consciousness.

At the core of the Insight's identity is its forward-thinking hybrid system Γ’β‚¬β€œ the Honda IMA system. This hybrid technology seamlessly integrates a 3-cylinder SOHC engine with an alternating synchronous electric motor. This combination optimizes power delivery while minimizing fuel consumption, presenting a harmonious fusion of performance and efficiency.

With a focus on compactness and agility, the Insight's Front-Wheel Drive (FF) drivetrain allows for nimble maneuvering. The lightweight frame, known as AAA-ZE1, underscores its responsive handling. The vehicle's dimensions strike a balance between a compact exterior and a comfortable interior, accommodating two seats within its two-door layout.

Underneath the sleek exterior lies a powertrain that redefines efficiency. The Insight 1.0's engine, with a displacement of 995 cm3, works in harmony with the Honda Multi Matic S transmission. This pairing ensures a smooth and efficient drive, accentuating the model's eco-friendly ethos.

One of the model's highlights is its exceptional fuel efficiency. With a fuel tank capacity of 10.5 US gallons (40 liters), the Insight demonstrates its dedication to minimizing environmental impact. The Variable Valve Timing System further enhances the engine's performance, while the Regular gasoline fuel type offers practicality and accessibility.

The Insight's commitment to sustainability extends to its fuel consumption figures. Achieving an impressive 75.8 mpg in the 10/15 mode, the model redefines what it means to balance power and frugality. This is a car that doesn't compromise on either front.

In conclusion, the 2004 Honda Insight 1.0 represents a remarkable fusion of advanced hybrid technology, efficient design, and driving enjoyment. It's a model that paves the way for environmentally-conscious driving without sacrificing performance.

Engine Specifications

Central to the 2004 Honda Insight 1.0's remarkable performance is its meticulously engineered powertrain. At the heart of this hybrid marvel lies a 995 cm3 3-cylinder SOHC engine, harmoniously integrated with an alternating synchronous electric motor. This dynamic duo creates a power synergy that not only optimizes performance but also emphasizes fuel efficiency.

The engine code, ECA-MF2, signifies the distinctive identity of the powerplant. With a focus on delivering a well-rounded driving experience, the engine boasts a maximum power output of 70.9 PS (70 bhp) or 52.1 kW. This potency is harnessed through the engine's operational range, with peak power achieved at 5700 rpm.

Equally impressive is the Insight's torque performance. With a maximum torque of 92.1 Nm (67.9 lb.ft) or 9.4 kg.m, this power is delivered effectively across various driving scenarios. The engine's torque curve shines brightly at 4800 rpm, highlighting its versatility.

The engine's innovative design is further enhanced by a Variable Valve Timing System. This system optimizes valve operation for improved performance and efficiency, elevating the Insight's overall capabilities. The engine's construction combines water cooling with a 3-cylinder configuration, contributing to its compactness and efficiency.

Fuel efficiency is a defining feature of the 2004 Honda Insight 1.0's engine. With a fuel consumption figure of 75.8 mpg in the 10/15 mode, it exemplifies the model's commitment to environmental sustainability without compromising on driving enjoyment.

In summary, the engine specifications of the 2004 Honda Insight 1.0 underscore its remarkable blend of power, efficiency, and innovation. It's a powertrain that showcases Honda's dedication to engineering excellence and delivering an exceptional driving experience.

Fuel Efficiency

The 2004 Honda Insight 1.0 stands out as a remarkable example of exceptional fuel efficiency, epitomizing Honda's commitment to sustainable driving without compromise. This hybrid model employs cutting-edge technology to achieve fuel consumption figures that redefine what's possible on the road.

The Insight's exceptional fuel efficiency is achieved through a combination of innovative engineering and a focus on eco-conscious design. The vehicle's hybrid powertrain, which integrates a 995 cm3 3-cylinder SOHC engine and an alternating synchronous electric motor, optimizes power delivery while minimizing fuel consumption. This synergy of power sources allows the Insight to operate with remarkable efficiency across various driving scenarios.

The model's commitment to fuel efficiency is highlighted by its fuel consumption figures. Achieving an impressive 75.8 mpg in the 10/15 mode, the Insight sets a new standard for frugality while maintaining practicality. This means fewer trips to the pump, reducing both environmental impact and operating costs.

The hybrid technology doesn't just stop at the powertrain Γ’β‚¬β€œ the Insight's Variable Valve Timing System optimizes engine performance, enhancing both power output and fuel efficiency. This innovative approach to engine management ensures that every drop of fuel is utilized effectively, further contributing to the model's exceptional fuel economy.

In conclusion, the 2004 Honda Insight 1.0's fuel efficiency is a testament to Honda's dedication to pushing the boundaries of environmentally-conscious driving. It demonstrates that a commitment to sustainability can go hand-in-hand with performance and practicality, setting a new standard for the automotive industry.

MPG Ratings

The 2004 Honda Insight 1.0 sets an impressive standard in terms of MPG ratings, solidifying its reputation as a pioneer in fuel-efficient driving. This model embodies Honda's commitment to eco-consciousness and innovative technology, resulting in remarkable miles-per-gallon figures that defy convention.

The Insight's Hybrid powertrain, consisting of a 995 cm3 3-cylinder SOHC engine and an alternating synchronous electric motor, plays a pivotal role in achieving exceptional MPG ratings. This powertrain harmoniously blends conventional combustion with electric propulsion, optimizing energy utilization and fuel consumption.

The result of this synergy is evident in the Insight's MPG ratings, with the model achieving an astounding 75.8 mpg in the 10/15 mode. This remarkable figure reflects the model's ability to maximize fuel efficiency without compromising on performance. This achievement is a testament to Honda's dedication to engineering excellence and a greener driving experience.

The Insight's Hybrid technology is further complemented by its Continuous Variable Transmission (CVT) gear ratio of 2.441 and rear gear ratio of 4.359. These components work in harmony to ensure that the power generated by the engine and electric motor is utilized optimally, enhancing both efficiency and driving dynamics.

The 2004 Honda Insight 1.0's impressive MPG ratings reaffirm its status as a trailblazing model that continues to inspire environmentally-conscious driving. By combining cutting-edge hybrid technology with practical performance, the Insight sets a high bar for fuel efficiency that stands as a hallmark of its engineering excellence.

Dimensions and Sizes

The 2004 Honda Insight 1.0 embraces a compact yet ergonomic design, carefully crafted to balance exterior dimensions with interior comfort. This model's dimensions and sizes reflect Honda's commitment to efficient space utilization while delivering a comfortable driving experience.

On the outside, the Insight 1.0 presents a distinctive silhouette, with an exterior length of 394 cm and a width of 169.5 cm. This design not only contributes to its aerodynamic profile but also enhances maneuverability in urban settings. The exterior height stands at 135.5 cm, further emphasizing the model's compactness.

Inside, the Insight continues to optimize space for the driver and passenger. The interior length measures 88 cm, while the interior width spans 139 cm. These dimensions ensure a comfortable cabin that caters to occupants' needs. The interior height of 109 cm creates a sense of openness within the compact confines.

The vehicle's design doesn't stop at the cabin. The Insight's wheelbase of 240 cm not only aids stability but also contributes to a smoother ride. The front axle length of 143.5 cm and rear axle length of 132.5 cm work in tandem to enhance the model's handling characteristics.

Maintaining a height of 15 cm above the ground, the Insight strikes a balance between ride height and stability. Its weight of 850 kg adds to this equilibrium, contributing to a responsive yet controlled driving experience. The model accommodates two seats across two doors, with a minimum turning circle of 4.8 meters.

In summary, the 2004 Honda Insight 1.0's dimensions and sizes reflect its carefully thought-out design. From its exterior aerodynamics to its interior comfort, every aspect of the model's proportions is optimized to create a harmonious driving experience that blends agility with practicality.

Wheel Details

The 2004 Honda Insight 1.0's wheel details play a crucial role in its overall driving dynamics, contributing to both its performance and aesthetics. Carefully designed and engineered, these wheels enhance the model's handling, stability, and visual appeal.

The Insight's wheel configuration features Front-Wheel Drive (FF), which not only simplifies the drivetrain but also enhances the car's agility. The lightweight AAA-ZE1 frame, combined with a wheelbase of 240 cm, contributes to responsive handling while maintaining stability on the road.

The model's wheel dimensions are specifically tailored to strike a balance between performance and efficiency. The front and rear tires are both sized at 165/65 R14 79S, underscoring the model's focus on compactness and practicality. These dimensions not only contribute to an efficient rolling resistance but also ensure a comfortable ride quality.

The Insight's wheels are complemented by a McPherson front suspension and an axle type (torsion beam type) rear suspension. This suspension setup is carefully calibrated to provide a harmonious balance between comfort and performance, further enhancing the driving experience.

In terms of exterior styling, the 2004 Honda Insight 1.0's wheel details add a touch of visual flair. The size and design of the wheels not only contribute to the model's aerodynamic profile but also enhance its overall presence on the road.

In conclusion, the 2004 Honda Insight 1.0's wheel details are a reflection of Honda's dedication to engineering excellence and a well-rounded driving experience. From enhancing performance to contributing to the model's aesthetics, the wheels are a crucial component of the Insight's overall design philosophy.

Trim Levels

The 2004 Honda Insight 1.0 offers a selection of trim levels that cater to a range of preferences, providing drivers with choices that suit their individual needs. Each trim level is designed to offer a distinct driving experience while maintaining the core principles of efficiency and innovation that define the Insight model.

The trim levels available for the 2004 Honda Insight 1.0 reflect the model's commitment to simplicity and streamlined options. Drivers can choose between the following trim levels:

1. Honda Insight CVT: This trim level features a Continuously Variable Transmission (CVT), providing a smooth and effortless driving experience. The CVT optimizes power delivery while maintaining impressive fuel efficiency, making it an ideal choice for those seeking a balanced and comfortable ride.

2. Honda Insight 5MT: For drivers who enjoy more hands-on control, the 5MT trim level offers a 5-speed manual transmission. This option allows for greater engagement with the driving experience and is well-suited for those who prioritize control over convenience.

Both trim levels are equipped with the same innovative hybrid technology, emphasizing the model's commitment to sustainability and forward-thinking design. Regardless of the chosen trim, drivers can expect the exceptional fuel efficiency and performance that the 2004 Honda Insight 1.0 is known for.

In summary, the available trim levels for the 2004 Honda Insight 1.0 cater to different driving preferences, allowing drivers to choose the option that aligns with their driving style and priorities. Whether opting for the convenience of the CVT or the engagement of the manual transmission, the Insight delivers a driving experience that merges efficiency with innovation.

Generations

The 2004 Honda Insight 1.0 belongs to a generation that marked a significant step forward in hybrid technology and eco-conscious driving. This generation of the Insight is characterized by its innovative engineering, forward-thinking design, and commitment to sustainability.

The first generation of the Honda Insight was introduced in 1999, laying the foundation for the model's hybrid legacy. The 2004 Insight 1.0, belonging to this generation, builds upon the pioneering work of its predecessors. It embodies Honda's dedication to pushing the boundaries of fuel efficiency and introducing hybrid technology to the mainstream automotive market.

The first-generation Insight's focus on aerodynamics, lightweight construction, and advanced powertrain technology set it apart from conventional vehicles. The 2004 model continued this tradition, offering drivers a model that was both environmentally conscious and enjoyable to drive.

This generation of the Insight introduced the innovative Honda IMA system, integrating a compact yet powerful engine with an electric motor. The seamless synergy between these power sources allowed the Insight to achieve impressive fuel efficiency ratings without sacrificing performance.

The 2004 Honda Insight 1.0's generation was a testament to Honda's ability to merge technological innovation with everyday practicality. It served as a stepping stone for hybrid technology, showcasing that efficiency and driving enjoyment could coexist harmoniously.

In conclusion, the 2004 Honda Insight 1.0's generation represents a pivotal moment in automotive history. It laid the groundwork for future generations of hybrid vehicles, setting the stage for the continued development of eco-friendly driving solutions that prioritize both performance and efficiency.

Model Years

The 2004 Honda Insight 1.0 stands as a representation of its model year, encapsulating the innovation and design philosophy that defined its era. As a testament to Honda's commitment to technological advancement and environmental sustainability, the 2004 model year Insight showcases the brand's ability to pioneer hybrid technology and provide drivers with a unique and forward-thinking driving experience.

The 2004 model year marked a continuation of the first-generation Insight's legacy, building upon the foundation set by its predecessors. This model year retained the same hybrid powertrain that integrated a 3-cylinder SOHC engine with an alternating synchronous electric motor. This powertrain not only emphasized fuel efficiency but also demonstrated Honda's dedication to engineering excellence.

The 2004 Honda Insight 1.0 carried forward its distinctive body type Γ’β‚¬β€œ a compact coupe Γ’β‚¬β€œ which highlighted both its aerodynamic profile and its practicality. The interior dimensions and ergonomic design provided a comfortable driving experience for two occupants, while the compact exterior dimensions made it well-suited for urban driving.

In terms of technology, the 2004 Insight continued to offer the Honda IMA system, showcasing the brand's pioneering hybrid technology. This system seamlessly managed power distribution between the engine and electric motor, resulting in remarkable fuel efficiency figures that were ahead of their time.

The 2004 model year Insight not only represents Honda's dedication to innovation but also its ongoing commitment to reducing environmental impact. The impressive fuel consumption figures and the focus on efficient design make it a notable example of sustainable driving in the early 2000s.

In summary, the 2004 Honda Insight 1.0's model year encapsulates a period of forward-thinking design, technological advancement, and a dedication to eco-friendly driving. It stands as a reminder of Honda's ability to push boundaries and provide drivers with vehicles that align with both their practical and environmental priorities.

Conclusion

In conclusion, the 2004 Honda Insight 1.0 stands as a testament to Honda's commitment to innovation, efficiency, and sustainability. This model, a pioneer in the hybrid vehicle segment, showcased Honda's ability to blend cutting-edge technology with practical driving solutions.

From its aerodynamic body design to its lightweight frame, the Insight embodied a balance between form and function. Its hybrid powertrain, integrating a 3-cylinder SOHC engine and an alternating synchronous electric motor, not only delivered impressive performance but also redefined what was possible in terms of fuel efficiency.

The 2004 Insight's compact dimensions made it agile and practical for urban environments, while its interior provided comfort and functionality for two occupants. The range of trim levels, including the CVT and 5MT options, allowed drivers to tailor their driving experience to their preferences.

As part of the first generation of Insight models, the 2004 version contributed to the evolution of hybrid technology. The Honda IMA system, a hallmark of the Insight series, emphasized the brand's dedication to pushing the boundaries of eco-conscious driving.

In an era where environmental awareness was gaining momentum, the 2004 Honda Insight 1.0 shone as a beacon of sustainable transportation. Its fuel efficiency ratings and innovative features set new standards for hybrid vehicles, demonstrating that efficiency and performance could coexist harmoniously.

Overall, the 2004 Honda Insight 1.0 is a reminder of Honda's ability to engineer vehicles that transcend their time, leaving a lasting impact on the automotive industry. It's a model that continues to inspire a greener and more innovative future for driving.

Brian Wong - Senior Reviews Editor of cars-directory.net

Brian Wong / Author

Brian Wong is an accomplished automotive journalist and editor with a passion for cars. With over a decade of experience in the industry, he has established himself as a trusted voice in the automotive community. Brian has written extensively about a wide range of topics in the field, from the latest trends in car design to innovative safety features and emerging technologies. As a senior reviews editor, he is responsible for test driving and analyzing the latest cars on the market, providing readers with accurate and objective reviews. His articles are widely read and respected for their depth of knowledge and analysis. Brian is committed to staying at the forefront of the latest developments in the automotive industry, and is dedicated to sharing his expertise and insights with his readers.

Add Comment

 * - The field should be filled
* Your Name:
 Contact (e-mail, phone...):
* Comments:
Photos:


 


Honda Insight Problems

ComplaintDescriptionName and LocationPhoto
Wind noise at windscreen2011 Honda Insight; nilEddy, Shah alam
When I drive 100~110km/h got wind sound at my windscreen. Send to Honda PJ still cannot resolve.