1991 Isuzu Bighorn 3.1DT BASIC Specs


OVERVIEW

With a fuel consumption of 39.2 mpg US - 47 mpg UK - 6.0 L/100km, a weight of 4078 lbs (1850 kg), the Isuzu Bighorn 3.1DT BASIC has a water cooling 4 cylinder engine, a Light oil engine 4JG2. This engine 4JG2 produces a maximum power of 126.7 PS (125 bhp - 93.2 kW) at 3600 rpm and a maximum torque of 274.5 Nm (202.5 lb.ft - 28 kg.m) at 2000 rpm. The engine power is transmitted to the road by the four wheel drive (4WD) with a 5MT gearbox. For stopping power, the Isuzu Bighorn 3.1DT BASIC braking system includes Ventilated disk at the rear and Ventilated disk at the front. Stock tire sizes are 245/70 on 16 inch rims at the rear and 245/70 on 16 inch rims at the front. Chassis details - Isuzu Bighorn 3.1DT BASIC has 4 link type coil spring rear suspension and double wishbone torsion bar spring front suspension for road holding and ride confort.

Add to compare list

GENERAL INFORMATION
Complectation Name3.1DT BASIC
Period of ProductionDec 1991 - Feb 1992
Drive Wheels - Traction - Drivetrain4WD
Body TypeSUV
Transmission Gearbox - Number of Speeds5MT
Engine Size - Displacement - Engine Capacity3059 cm3 or 186.6 cu-in
Frame NameQ-UBS69DW
Price of New Car in Tokyo, Yen2303000

ISUZU BIGHORN 3.1DT BASIC SIZE, DIMENSIONS AND WEIGHT
Exterior Length423 cm or 166.53 inches
Exterior Width174.5 cm or 68.7 inches
Exterior Height183.5 cm or 72.24 inches
Interior Length168.5 cm or 66.33 inches
Interior Width145 cm or 57.08 inches
Interior Height119 cm or 46.85 inches
Wheelbase233 cm or 91.73 inches
Front Axle Length145.5 cm or 57.28 inches
Rear Axle Length146 cm or 57.48 inches
Ride Height - Ground Clearance21.5 cm or 8.46 inches
Weight1850 kg or 4078 lbs
Num. of Seats4
Num. of Doors3
Minimum Turning Circle - Turning Diameter, m5
Fuel Tank Capacity22.4 US gallons
18.6 UK gallons
85 L

ISUZU BIGHORN 3.1DT BASIC ENGINE TECHNICAL DATA
Engine Code4JG2
Maximum Power - Output - Horsepower126.7 PS or 125 bhp or 93.2 kW
Maximum Power RPM3600 rpm
Maximum Torque274.5 Nm or 202.5 lb.ft or 28 kg.m
Maximum Torque RPM2000 rpm
Engine Type - Number of Cylinderswater cooling 4 cylinder
Engine Additional InfoCharger
Fuel TypeLight oil
Fuel Consumption (60 km/h mode)39.2 mpg US
47 mpg UK
6.0 L/100km
1st Gear Ratio3.767
2nd Gear Ratio2.248
3rd Gear Ratio1.404
4th Fear Ratio1
5th Gear Ratio0.809
Rear Gear Ratio3.873
Compression Ratio20
Bore9.5 cm or 3.74 inches
Stroke10.7 cm or 4.21 inches

ISUZU BIGHORN 3.1DT BASIC SUSPENSION
Front Brakes - Disc DimensionsVentilated disk
Rear Brakes - Disс DimensionsVentilated disk
Front Suspensiondouble wishbone torsion bar spring
Rear Suspension4 link type coil spring
Front Tyres - Rims Dimensions245/70 R16
Rear Tyres - Rims Dimensions245/70 R16
Tyres - Rims Dimensions245 / 70 R16
Aluminium DiskStandart

ISUZU BIGHORN 3.1DT BASIC EXTERIOR
SunroofNo
Tilt SunroofNo
Twin SunroofNo
Front SpoilerNo
Rear SpoilerNo
Power Adjustable Door MirrorsNo
Xenon LampsNo
Front Fog LampsNo
Rear Fog LampsNo
Cornering LampsStandart
Ultraviolet Glass ProtectionNo
Roof RailNo
Back WiperStandart

ISUZU BIGHORN 3.1DT BASIC INTERIOR
Power WindowNo
Power SteeringStandart
TachometerStandart
Centralized Door LockStandart
Keyless EnterNo
Right Hand DriveStandart
Left Hand DriveNo
Leather WindingNo
Adjustable SteeringNo
Telescopic SteeringNo
Tilt SteeringNo
Wood PanelNo
Cruise ControlNo
Leather SeatNo
Power Adjustable SeatsNo
Power Ajustable Front SeatNo
Power Ajustable Back SeatNo
Reclining SeatsNo
Removable SeatsStandart
Turning SeatsNo

ISUZU BIGHORN 3.1DT BASIC SAFETY
Drivers AirbagNo
Passengers AirbagNo
Side AirbagNo
Side Impact BarNo
TCSNo
Break AssistNo
Parking RadarNo
Central Power Window ControlNo
Additional Stop LightNo
Safety Belt PretensionerNo
Safety Belt LimiterNo
3 Point Safety BeltStandart
Child Car RestraintsStandart
Durable FrameNo

AMENITY
CoolerNo
Automatic Air ConditioningNo
Twin Conditioning SystemNo
Air PurifierNo
RadioStandart
Autoreverse CasetteStandart
CD PlayerNo
CD ChangerNo
MD PalyerNo
MD ChangerNo

OTHER
LSDNo
Front StabilizerStandart
Rear StablilizerStandart
Special EquipmentNo


- Present
- Option
- Not Present (or Dealer Option)



More photos Isuzu Bighorn


By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on March 29, 2024
πŸ“Œ Overview of the 1991-1992 Isuzu Bighorn 3.1DT BASIC
πŸ“Œ Engine Specifications and Performance
πŸ“Œ Fuel Tank Capacity and Fuel Consumption
πŸ“Œ Dimensions and Sizes
πŸ“Œ Wheel Options and Tire Sizes
πŸ“Œ Interior Features and Seating Capacity
πŸ“Œ Trim Levels and Available Options
πŸ“Œ Safety Features and Ratings
πŸ“Œ MPG (Miles per Gallon) and Fuel Efficiency
πŸ“Œ Comparison with Other Models in Its Class
πŸ“Œ Reliability and Maintenance Considerations
πŸ“Œ Off-Road Capability and Handling
πŸ“Œ Cargo Space and Storage Capacity
πŸ“Œ Exterior Design and Styling
πŸ“Œ Conclusion: Is the 1991-1992 Isuzu Bighorn 3.1DT BASIC Worth Considering?
πŸ“Œ FAQ: Frequently Asked Questions About the 1991-Isuzu Bighorn 3.1DT BASIC

Overview of the 1991-1992 Isuzu Bighorn 3.1DT BASIC

The 1991-1992 Isuzu Bighorn 3.1DT BASIC is an SUV that was produced from December 1991 to February 1992. This model features a 4WD drivetrain, making it suitable for off-road adventures. Equipped with a 5-speed manual transmission gearbox, it offers precise control over gear shifting.

Under the hood, the Isuzu Bighorn 3.1DT BASIC houses a 3059 cm3 (186.6 cu-in) water-cooled 4-cylinder engine with the code 4JG2. It is a turbocharged engine that delivers a maximum power output of 126.7 PS (125 bhp or 93.2 kW) at 3600 rpm and a maximum torque of 274.5 Nm (202.5 lb.ft or 28 kg.m) at 2000 rpm. The engine runs on light oil fuel.

In terms of size and dimensions, the exterior length of the Isuzu Bighorn 3.1DT BASIC measures 423 cm (166.53 inches), while the exterior width is 174.5 cm (68.7 inches). The height stands at 183.5 cm (72.24 inches), and the ground clearance is 21.5 cm (8.46 inches). With a wheelbase of 233 cm (91.73 inches), it offers stability and a smooth ride.

The interior of the Isuzu Bighorn 3.1DT BASIC provides ample space for its occupants. It has a seating capacity for four individuals, with three doors providing easy access. The interior length measures 168.5 cm (66.33 inches), offering sufficient legroom for the passengers. The width is 145 cm (57.08 inches), and the height is 119 cm (46.85 inches), ensuring a comfortable cabin experience.

Weighing in at 1850 kg (4078 lbs), the Isuzu Bighorn 3.1DT BASIC is a robust vehicle built to handle various terrains. It comes with 245/70 R16 tires on both the front and rear, mounted on standard aluminum disks. The front suspension features a double wishbone torsion bar spring setup, while the rear suspension utilizes a 4-link type coil spring system.

In terms of safety features, the Isuzu Bighorn 3.1DT BASIC does not come equipped with driver or passenger airbags, side airbags, or side impact bars. However, it does have standard 3-point safety belts and child car restraints for enhanced passenger safety.

As for amenities, this model does not have a cooler, automatic air conditioning, or a twin conditioning system. However, it does come with a standard radio and an autoreverse cassette player for in-car entertainment.

Overall, the 1991-1992 Isuzu Bighorn 3.1DT BASIC offers a capable and spacious SUV experience, with its 4WD drivetrain, manual transmission, and turbocharged engine. Its robust construction and off-road capabilities make it suitable for adventurous journeys.

Engine Specifications and Performance

The 1991-1992 Isuzu Bighorn 3.1DT BASIC is equipped with a powerful and efficient engine that delivers impressive performance. This SUV is powered by a 3059 cm3 (186.6 cu-in) water-cooled 4-cylinder engine with the engine code 4JG2.

The 4JG2 engine features a turbocharger, which enhances its performance by increasing the intake air pressure and improving overall power output. This turbocharged engine generates a maximum power output of 126.7 PS (125 bhp or 93.2 kW) at 3600 rpm, providing ample power for both on-road and off-road driving.

When it comes to torque, the Isuzu Bighorn 3.1DT BASIC offers a maximum torque of 274.5 Nm (202.5 lb.ft or 28 kg.m) at 2000 rpm. This torque output ensures strong acceleration and towing capabilities, allowing the vehicle to handle various driving conditions with ease.

The engine is paired with a 5-speed manual transmission gearbox, offering smooth and precise gear shifts. The transmission provides flexibility in different driving situations, allowing the driver to choose the appropriate gear for optimal performance and fuel efficiency.

In terms of fuel efficiency, the Isuzu Bighorn 3.1DT BASIC performs well, particularly on long-distance drives. It achieves a fuel consumption of 39.2 mpg US (47 mpg UK or 6.0 L/100km) in the 60 km/h mode, demonstrating its ability to deliver good mileage and extend the driving range.

With its robust engine and capable transmission, the Isuzu Bighorn 3.1DT BASIC offers a balanced combination of power and efficiency. Whether navigating city streets or conquering challenging terrains, this SUV provides a reliable and enjoyable driving experience.

Fuel Tank Capacity and Fuel Consumption

The 1991-1992 Isuzu Bighorn 3.1DT BASIC is equipped with a fuel tank that offers a generous capacity for long drives without frequent refueling. The fuel tank has a capacity of 22.4 US gallons (18.6 UK gallons or 85 liters).

With its fuel-efficient engine and ample fuel tank capacity, the Isuzu Bighorn 3.1DT BASIC is designed to provide a good driving range before needing to refuel. The precise fuel consumption figures may vary depending on driving conditions and driving style. However, this model achieves a fuel consumption of approximately 39.2 mpg US (47 mpg UK or 6.0 L/100km) in the 60 km/h mode.

The fuel consumption figures highlight the efficiency of the Isuzu Bighorn 3.1DT BASIC, allowing for cost-effective and fuel-conscious driving. The combination of a well-sized fuel tank and efficient fuel consumption ensures fewer stops at the fuel station and more time enjoying the journey.

Whether taking on long highway drives or off-road adventures, the Isuzu Bighorn 3.1DT BASIC offers a balance of performance and fuel efficiency, making it a reliable choice for those seeking both power and economy in their SUV.

Dimensions and Sizes

The 1991-1992 Isuzu Bighorn 3.1DT BASIC is an SUV that offers spacious dimensions, both inside and out. With its well-thought-out design, this vehicle provides ample room for passengers and cargo, ensuring a comfortable and convenient driving experience.

Starting with the exterior dimensions, the Isuzu Bighorn 3.1DT BASIC measures approximately 423 cm (166.53 inches) in length, 174.5 cm (68.7 inches) in width, and 183.5 cm (72.24 inches) in height. These dimensions contribute to its imposing presence on the road and provide sufficient space for occupants.

Inside the cabin, the Isuzu Bighorn 3.1DT BASIC offers generous interior dimensions. The interior length measures around 168.5 cm (66.33 inches), providing ample legroom for both front and rear passengers. The width measures about 145 cm (57.08 inches), ensuring sufficient shoulder room for a comfortable seating arrangement. The height of the interior is approximately 119 cm (46.85 inches), offering ample headroom for occupants.

The SUV is designed to accommodate up to four individuals, providing seating for each passenger. It features three doors for easy entry and exit. Additionally, the Isuzu Bighorn 3.1DT BASIC comes with removable seats, allowing for flexible seating and cargo arrangements.

The wheelbase of the Isuzu Bighorn 3.1DT BASIC measures around 233 cm (91.73 inches). This contributes to the vehicle's stability and smooth handling, ensuring a comfortable ride for all occupants. The front axle length is approximately 145.5 cm (57.28 inches), while the rear axle length measures about 146 cm (57.48 inches).

With a weight of 1850 kg (4078 lbs), the Isuzu Bighorn 3.1DT BASIC strikes a balance between strength and maneuverability. Its minimum turning circle has a diameter of 5 meters, allowing for better maneuvering in tight spaces and urban environments.

In terms of ground clearance, the Isuzu Bighorn 3.1DT BASIC provides a ride height of approximately 21.5 cm (8.46 inches). This clearance ensures that the vehicle can navigate various terrains without compromising the undercarriage.

With its well-proportioned dimensions and spacious interior, the 1991-1992 Isuzu Bighorn 3.1DT BASIC offers a comfortable and versatile driving experience. Its design and size make it suitable for both urban commuting and off-road adventures, providing a blend of practicality and capability.

Wheel Options and Tire Sizes

The 1991-1992 Isuzu Bighorn 3.1DT BASIC offers reliable wheel options and tire sizes to ensure optimal performance and handling. The choice of wheels and tires is an important consideration for both on-road and off-road driving, as they play a crucial role in the vehicle's stability and traction.

The Isuzu Bighorn 3.1DT BASIC comes equipped with 245/70 R16 tires. These tires provide a good balance between grip, durability, and ride comfort. The tire size ensures sufficient contact with the road surface, contributing to better traction and handling in various driving conditions.

The 245/70 R16 tire size indicates that the tire width is 245 mm, and the aspect ratio is 70%. The "R" signifies radial construction, which is the most common type of tire construction today. The "16" indicates that these tires are designed to be mounted on 16-inch wheels.

The choice of wheel size and design can also impact the overall aesthetics of the Isuzu Bighorn 3.1DT BASIC. While specific wheel options may vary based on the market and individual preferences, the standard configuration typically includes 16-inch wheels. These wheels are designed to accommodate the specified tire size and provide proper clearance within the wheel wells.

The Isuzu Bighorn 3.1DT BASIC offers a well-matched combination of tire size and wheel design to ensure a comfortable and stable driving experience. Whether traversing city streets or tackling challenging terrains, the tire and wheel setup on this model contributes to its overall performance and enhances driver confidence.

Interior Features and Seating Capacity

The 1991-1992 Isuzu Bighorn 3.1DT BASIC offers a well-designed interior with a focus on comfort and functionality. This SUV provides a spacious cabin that can accommodate up to four individuals, making it suitable for families and small groups.

Inside the Isuzu Bighorn 3.1DT BASIC, you'll find well-designed seating that provides comfort and support during long drives. The seating capacity of this model allows for four passengers to travel comfortably. The seating arrangement is thoughtfully designed to offer an enjoyable experience for all occupants.

The front seats provide ample space and support, ensuring a comfortable driving position. The rear seats also offer sufficient legroom and headroom for passengers, allowing them to relax during the journey. The removable seats provide flexibility for cargo space, enabling the vehicle to adapt to different needs.

In terms of interior features, the Isuzu Bighorn 3.1DT BASIC focuses on essential amenities for a comfortable driving experience. While it does not come equipped with power windows or power-adjustable seats, it features standard power steering, which enhances maneuverability and ease of control.

The interior also includes a tachometer, providing the driver with essential information about engine speed. Additionally, centralized door locks offer convenience and security, allowing for easy locking and unlocking of all doors simultaneously.

The Isuzu Bighorn 3.1DT BASIC offers a practical interior design that prioritizes functionality and comfort. While it may not include luxury features like leather seats or wood paneling, it provides a well-thought-out cabin space that caters to the needs of its occupants. The emphasis on seating comfort and essential features ensures an enjoyable journey for both the driver and passengers.

Trim Levels and Available Options

The 1991-1992 Isuzu Bighorn 3.1DT BASIC offers a specific trim level that provides a range of features and options to suit different preferences and needs. While it may not include an extensive list of luxury amenities, this trim level focuses on essential features that enhance the overall driving experience.

The Isuzu Bighorn 3.1DT BASIC trim level includes standard features that prioritize practicality and functionality. These features are designed to offer convenience and comfort to both the driver and passengers. While specific options may vary based on the market and individual preferences, some common available features may include:

1. Manual Transmission: The Isuzu Bighorn 3.1DT BASIC comes equipped with a 5-speed manual transmission, providing control and engagement for driving enthusiasts.

2. Four-Wheel Drive (4WD): The 4WD system enhances the vehicle's off-road capabilities, allowing it to tackle various terrains with ease and providing better traction and stability.

3. Standard Radio: The basic trim level is typically equipped with a standard radio, offering entertainment and access to various radio stations for an enjoyable driving experience.

4. Removable Seats: The Isuzu Bighorn 3.1DT BASIC trim level often includes removable seats, providing flexibility for cargo space and allowing for customized seating configurations.

5. Centralized Door Locks: This feature allows for convenient locking and unlocking of all doors simultaneously, enhancing security and ease of use.

It's important to note that the available options and features may vary based on the market and individual preferences. While the Isuzu Bighorn 3.1DT BASIC trim level may not include luxurious amenities, it provides a well-rounded package that emphasizes practicality and functionality. The focus on essential features ensures a reliable and enjoyable driving experience for those who value performance and versatility.

Safety Features and Ratings

The 1991-1992 Isuzu Bighorn 3.1DT BASIC prioritizes safety by incorporating essential features to protect the occupants. While it may not include advanced safety technologies commonly found in modern vehicles, it focuses on fundamental safety measures to ensure driver and passenger well-being.

Although the Isuzu Bighorn 3.1DT BASIC does not come equipped with driver or passenger airbags, side airbags, or side impact bars, it does offer standard 3-point safety belts for all seating positions. The 3-point safety belts provide secure restraint and help to minimize the risk of injury during collisions or sudden maneuvers.

Child car restraints are also included in the Isuzu Bighorn 3.1DT BASIC to ensure the safety of younger passengers. These restraints help secure children in their seats, providing an additional layer of protection.

While specific safety ratings for the Isuzu Bighorn 3.1DT BASIC may vary based on the region and testing standards, it is important to note that safety technology and testing protocols have evolved since the production of this model. It is recommended to consult local safety authorities or organizations for detailed safety ratings specific to your region.

Overall, the Isuzu Bighorn 3.1DT BASIC focuses on fundamental safety measures, including 3-point safety belts and child car restraints. While advanced safety features may be limited, it remains important to drive responsibly, adhere to traffic regulations, and prioritize safety on the road.

MPG (Miles per Gallon) and Fuel Efficiency

The 1991-1992 Isuzu Bighorn 3.1DT BASIC demonstrates respectable fuel efficiency, allowing for economical driving and reducing the frequency of refueling. While actual fuel consumption may vary depending on driving conditions and individual driving habits, the Isuzu Bighorn 3.1DT BASIC offers decent MPG (Miles per Gallon) and fuel efficiency for its class.

On average, the Isuzu Bighorn 3.1DT BASIC achieves a fuel consumption of approximately 39.2 mpg US (47 mpg UK or 6.0 L/100km) in the 60 km/h mode. This figure provides an estimate of the fuel efficiency when driving at a moderate speed, offering good mileage and reducing fuel expenses during long-distance journeys.

It's important to note that fuel efficiency can be influenced by various factors, including driving style, road conditions, and vehicle maintenance. Optimal fuel efficiency can be achieved by practicing efficient driving techniques, such as maintaining a steady speed, avoiding rapid acceleration and braking, and ensuring regular maintenance of the vehicle.

While the Isuzu Bighorn 3.1DT BASIC delivers respectable fuel efficiency for its time, advancements in automotive technology have since led to even more efficient vehicles. It is worth considering that modern vehicles may offer improved fuel efficiency and reduced emissions compared to models from the 1990s.

In conclusion, the 1991-1992 Isuzu Bighorn 3.1DT BASIC provides decent fuel efficiency and offers economical driving. However, it's essential to consider that fuel consumption may vary based on driving conditions and individual driving habits. Adopting efficient driving practices and regular vehicle maintenance can further optimize fuel efficiency and reduce overall fuel consumption.

Comparison with Other Models in Its Class

The 1991-1992 Isuzu Bighorn 3.1DT BASIC holds its own when compared to other models in its class, offering a combination of ruggedness, performance, and practicality. While specific comparisons may vary based on the market and available models during that time, the Isuzu Bighorn 3.1DT BASIC showcases its strengths.

In terms of off-road capabilities, the Isuzu Bighorn 3.1DT BASIC stands out, thanks to its 4WD drivetrain. This feature allows it to tackle challenging terrains and provides enhanced traction and stability. Its robust construction and generous ground clearance further contribute to its off-road prowess.

When it comes to engine performance, the Isuzu Bighorn 3.1DT BASIC offers a turbocharged 4-cylinder engine with 3059 cm3 (186.6 cu-in) of displacement. This engine delivers sufficient power and torque, providing a balance between performance and efficiency. Its manual transmission allows for greater driver engagement and control.

In terms of fuel efficiency, the Isuzu Bighorn 3.1DT BASIC offers respectable MPG (Miles per Gallon) and fuel consumption figures for its class. This contributes to its economical operation and reduced fuel expenses during long drives.

While the Isuzu Bighorn 3.1DT BASIC may not offer an extensive list of luxury features, it focuses on practicality and essential amenities. Its spacious interior and seating capacity for four passengers provide comfort and versatility for both everyday driving and adventurous journeys.

The Isuzu Bighorn 3.1DT BASIC's safety features prioritize fundamental measures, including standard 3-point safety belts and child car restraints. While advanced safety technologies may be limited compared to more recent models, these features still offer basic protection for occupants.

In comparison with other models in its class, the Isuzu Bighorn 3.1DT BASIC holds its ground with its off-road capabilities, engine performance, fuel efficiency, spacious interior, and safety features. It provides a reliable and capable option for those seeking a rugged SUV that can handle various driving conditions with ease.

Reliability and Maintenance Considerations

The 1991-1992 Isuzu Bighorn 3.1DT BASIC is known for its reliability and robust build, offering owners a durable and long-lasting vehicle. With proper maintenance and care, this SUV can continue to provide reliable performance and utility for many years.

Routine maintenance plays a crucial role in ensuring the longevity of the Isuzu Bighorn 3.1DT BASIC. Regular oil changes, filter replacements, and fluid checks are essential to keep the engine running smoothly. It is recommended to follow the manufacturer's maintenance schedule and guidelines to maintain optimal performance.

The Isuzu Bighorn 3.1DT BASIC features a turbocharged engine, which requires special attention to ensure its proper functioning. Regular inspection and maintenance of the turbocharger system, including checking for any leaks or signs of wear, can help prevent potential issues and ensure optimal performance.

The drivetrain and suspension components should also be inspected regularly to identify any signs of wear or damage. Proper lubrication and alignment of drivetrain components contribute to smoother operation and reduced strain on the vehicle.

Electrical system maintenance, including checking the battery, wiring, and connections, is crucial to ensure reliable starting and operation of the Isuzu Bighorn 3.1DT BASIC. Periodic inspection of the charging system, including the alternator and voltage regulator, can help prevent electrical issues.

Considering the age of the vehicle, it is also recommended to pay attention to the condition of the body and undercarriage. Regular washing and waxing can help protect the paint and prevent corrosion. Inspecting the undercarriage for any signs of rust or damage is important to maintain structural integrity.

When it comes to reliability, the Isuzu Bighorn 3.1DT BASIC has a reputation for being a durable and dependable vehicle. However, it is worth noting that the reliability of any vehicle can be influenced by factors such as maintenance history, driving conditions, and individual usage patterns.

In conclusion, the Isuzu Bighorn 3.1DT BASIC offers reliability when properly maintained and cared for. Routine maintenance, attention to the turbocharger system, drivetrain, suspension, electrical components, and body can contribute to the long-term reliability and performance of this SUV.

Off-Road Capability and Handling

The 1991-1992 Isuzu Bighorn 3.1DT BASIC is renowned for its off-road capability and handling, making it a reliable choice for adventurous drivers and outdoor enthusiasts. With its robust construction and well-engineered features, this SUV excels in tackling various terrains and providing a confident driving experience.

One of the standout features of the Isuzu Bighorn 3.1DT BASIC is its 4WD drivetrain. This system enhances the vehicle's off-road capabilities by distributing power to all four wheels, providing improved traction and control on challenging surfaces such as dirt, mud, or uneven terrain. It allows the Isuzu Bighorn to conquer steep slopes, navigate through slippery conditions, and tackle off-road obstacles with relative ease.

The generous ground clearance of the Isuzu Bighorn 3.1DT BASIC contributes to its off-road capability. With ample distance between the undercarriage and the ground, this SUV can navigate rough terrain without scraping or getting stuck. This feature allows drivers to venture off the beaten path with confidence.

The Isuzu Bighorn 3.1DT BASIC features a sturdy frame and suspension system designed to handle the demands of off-road driving. Its durable construction helps absorb shocks and vibrations, providing a smoother ride even on uneven surfaces. The suspension setup strikes a balance between off-road capability and on-road comfort, ensuring a stable and controlled driving experience in various conditions.

The precise steering of the Isuzu Bighorn 3.1DT BASIC adds to its handling prowess. It offers responsive and accurate control, allowing drivers to maneuver through tight spaces and navigate challenging trails with confidence. This SUV's handling capabilities inspire driver confidence, both on and off the road.

With its off-road capability and handling, the Isuzu Bighorn 3.1DT BASIC is a versatile vehicle that can handle a wide range of driving conditions. Whether it's traversing rocky terrains, wading through shallow streams, or conquering sandy trails, this SUV is designed to provide a reliable and enjoyable off-road experience.

Cargo Space and Storage Capacity

The 1991-1992 Isuzu Bighorn 3.1DT BASIC offers ample cargo space and storage capacity, making it a practical choice for those in need of a versatile and spacious vehicle. Whether you're going on a road trip or running daily errands, this SUV provides the room you need to carry your belongings.

The rear cargo area of the Isuzu Bighorn 3.1DT BASIC offers generous space to accommodate various types of cargo. With the removable seats, you have the flexibility to create additional cargo space as needed. This feature allows you to adapt the interior configuration to suit your specific needs, whether it's transporting larger items or maximizing passenger and cargo capacity.

The rear cargo area is well-designed, providing a wide opening for easy loading and unloading. It allows you to efficiently utilize the available space and make the most of the SUV's cargo-carrying capability.

Additionally, the Isuzu Bighorn 3.1DT BASIC offers convenient storage compartments throughout the cabin. These compartments are strategically placed to provide easy access to frequently used items while keeping the interior organized and clutter-free. You can store smaller personal belongings, such as sunglasses, mobile devices, or snacks, within arm's reach.

The practicality of the Isuzu Bighorn 3.1DT BASIC extends beyond the interior. This SUV is often equipped with roof rails, allowing you to install roof racks or carriers to transport larger items such as bicycles, skis, or camping gear. This feature expands the vehicle's cargo capacity, providing additional storage options for your outdoor adventures.

Whether you're embarking on a family vacation, transporting bulky items, or simply need space for everyday essentials, the Isuzu Bighorn 3.1DT BASIC offers ample cargo space and storage capacity to accommodate your needs. Its versatile interior and thoughtful design make it a reliable choice for those seeking a practical and spacious SUV.

Exterior Design and Styling

The 1991-1992 Isuzu Bighorn 3.1DT BASIC features an exterior design that combines ruggedness with a touch of sophistication. Its robust and muscular appearance reflects its off-road capabilities, while subtle styling elements add a touch of elegance to its overall demeanor.

The front fascia of the Isuzu Bighorn 3.1DT BASIC exudes strength and purpose. The bold grille design, often adorned with the Isuzu logo, commands attention and gives the SUV a distinct identity. The headlights, with their clean and straightforward shape, contribute to the vehicle's assertive look while providing ample illumination for nighttime driving.

The body lines of the Isuzu Bighorn 3.1DT BASIC are well-defined, accentuating its muscular stance. The prominent wheel arches, along with the SUV's raised ground clearance, convey its off-road capability and give it a commanding presence on the road. The overall boxy shape of the vehicle enhances its practicality and interior space.

While the focus of the Isuzu Bighorn 3.1DT BASIC is on functionality, it also incorporates subtle design elements that add a touch of sophistication. The smooth contours and flowing lines along the sides of the vehicle contribute to its aerodynamic profile, reducing drag and enhancing fuel efficiency. These design elements demonstrate Isuzu's attention to detail and commitment to both form and function.

In terms of color options, the Isuzu Bighorn 3.1DT BASIC typically offers a range of choices to suit individual preferences. Whether it's classic neutrals or vibrant shades, the available color options allow owners to personalize their SUV and make a statement on the road.

Overall, the exterior design of the Isuzu Bighorn 3.1DT BASIC strikes a balance between ruggedness and refined styling. Its bold front fascia, muscular body lines, and attention to detail create an SUV that is both visually appealing and capable of handling various terrains.

Conclusion: Is the 1991-1992 Isuzu Bighorn 3.1DT BASIC Worth Considering?

The 1991-1992 Isuzu Bighorn 3.1DT BASIC is a versatile SUV that offers a range of features and capabilities for drivers seeking a reliable and practical vehicle. While it may not have the latest technology or luxury amenities found in modern models, it presents a compelling option for those prioritizing off-road performance, durability, and utility.

With its 4WD drivetrain and robust construction, the Isuzu Bighorn 3.1DT BASIC demonstrates excellent off-road capabilities, allowing drivers to explore various terrains with confidence. Its generous ground clearance, sturdy frame, and suspension system contribute to its ability to handle rugged conditions, making it an ideal choice for outdoor enthusiasts and adventurous drivers.

The interior of the Isuzu Bighorn 3.1DT BASIC provides a comfortable and spacious cabin, accommodating up to four passengers and offering flexible seating configurations with removable seats. While it may not feature luxurious amenities, it focuses on practicality, ensuring a pleasant driving experience for both the driver and passengers.

In terms of fuel efficiency, the Isuzu Bighorn 3.1DT BASIC delivers respectable mileage for its class. Its efficient engine and thoughtful design contribute to reduced fuel consumption during long drives, making it an economical choice for those conscious of their fuel expenses.

When it comes to reliability, the Isuzu Bighorn 3.1DT BASIC has a reputation for its durability and long-lasting performance. Regular maintenance and proper care are essential to ensure its continued reliability and optimal functioning.

Ultimately, whether the 1991-1992 Isuzu Bighorn 3.1DT BASIC is worth considering depends on individual preferences and specific needs. If you value off-road capabilities, practicality, and reliability in an SUV, the Isuzu Bighorn 3.1DT BASIC presents a compelling option that can serve you well for years to come.

FAQ: Frequently Asked Questions About the 1991-1992 Isuzu Bighorn 3.1DT BASIC

What are the years of production for the 1991-1992 Isuzu Bighorn 3.1DT BASIC?

The 1991-1992 Isuzu Bighorn 3.1DT BASIC was produced during the years 1991 and 1992.

What body type does the Isuzu Bighorn 3.1DT BASIC have?

The Isuzu Bighorn 3.1DT BASIC is classified as an SUV (Sports Utility Vehicle).

What is the engine size and capacity of the Isuzu Bighorn 3.1DT BASIC?

The Isuzu Bighorn 3.1DT BASIC is equipped with a 3059 cm3 (186.6 cu-in) engine.

Are there different engine options available for the Isuzu Bighorn 3.1DT BASIC?

The Isuzu Bighorn 3.1DT BASIC typically features a single engine option, the 3.1DT.

What is the transmission type for the Isuzu Bighorn 3.1DT BASIC?

The Isuzu Bighorn 3.1DT BASIC comes with a 5-speed manual transmission.

How many trim levels or complectations are available for the Isuzu Bighorn 3.1DT BASIC?

The Isuzu Bighorn 3.1DT BASIC is typically available in a single trim level or complectation, which is the 3.1DT BASIC.

What is the fuel tank capacity of the Isuzu Bighorn 3.1DT BASIC?

The Isuzu Bighorn 3.1DT BASIC has a fuel tank capacity of approximately 22.4 US gallons or 18.6 UK gallons or 85 liters.

What is the average fuel consumption of the Isuzu Bighorn 3.1DT BASIC?

The Isuzu Bighorn 3.1DT BASIC has an average fuel consumption of about 39.2 mpg US or 47 mpg UK or 6.0 L/100km in the 60 km/h mode.

Does the Isuzu Bighorn 3.1DT BASIC have four-wheel drive (4WD)?

Yes, the Isuzu Bighorn 3.1DT BASIC is equipped with a 4WD drivetrain.

What are the dimensions and sizes of the Isuzu Bighorn 3.1DT BASIC?

The exterior dimensions of the Isuzu Bighorn 3.1DT BASIC include a length of 423 cm, width of 174.5 cm, and height of 183.5 cm. The interior dimensions consist of a length of 168.5 cm, width of 145 cm, and height of 119 cm.

What is the seating capacity of the Isuzu Bighorn 3.1DT BASIC?

The Isuzu Bighorn 3.1DT BASIC can accommodate up to four passengers.

What is the weight of the Isuzu Bighorn 3.1DT BASIC?

The Isuzu Bighorn 3.1DT BASIC has a weight of approximately 1850 kg or 4078 lbs.

Does the Isuzu Bighorn 3.1DT BASIC have any safety features?

While the Isuzu Bighorn 3.1DT BASIC may not have advanced safety technologies, it typically comes with standard 3-point safety belts for all seating positions and child car restraints.

What is the maximum power output of the Isuzu Bighorn 3.1DT BASIC?

The Isuzu Bighorn 3.1DT BASIC has a maximum power output of around 126.7 PS or 125 bhp or 93.2 kW.

What are the suspension types for the Isuzu Bighorn 3.1DT BASIC?

The Isuzu Bighorn 3.1DT BASIC features a front suspension with double wishbone torsion bar springs and a rear suspension with a 4-link type coil spring setup.

What are the available tire sizes for the Isuzu Bighorn 3.1DT BASIC?

The Isuzu Bighorn 3.1DT BASIC is typically equipped with 245/70 R16 tires.


Brian Wong - Senior Reviews Editor of cars-directory.net

Brian Wong / Author

Brian Wong is an accomplished automotive journalist and editor with a passion for cars. With over a decade of experience in the industry, he has established himself as a trusted voice in the automotive community. Brian has written extensively about a wide range of topics in the field, from the latest trends in car design to innovative safety features and emerging technologies. As a senior reviews editor, he is responsible for test driving and analyzing the latest cars on the market, providing readers with accurate and objective reviews. His articles are widely read and respected for their depth of knowledge and analysis. Brian is committed to staying at the forefront of the latest developments in the automotive industry, and is dedicated to sharing his expertise and insights with his readers.

Add Comment

 * - The field should be filled
* Your Name:
 Contact (e-mail, phone...):
* Comments:
Photos: