1996 Mitsubishi Lancer 2.0DT MX saloon Specs


OVERVIEW

With a fuel consumption of 63.5 mpg US - 76.3 mpg UK - 3.7 L/100km, a weight of 2645 lbs (1200 kg), the Mitsubishi Lancer 2.0DT MX saloon has a water cooling 4 cylinder SOHC8 valve engine, a Light oil engine 4D68. This engine 4D68 produces a maximum power of 89.2 PS (88 bhp - 65.6 kW) at 4500 rpm and a maximum torque of 176.5 Nm (130.1 lb.ft - 18 kg.m) at 2500 rpm. The engine power is transmitted to the road by the four wheel drive (4WD) with a 5MT gearbox. For stopping power, the Mitsubishi Lancer 2.0DT MX saloon braking system includes Leading trailing drum brake at the rear and Ventilated disk at the front. Chassis details - Mitsubishi Lancer 2.0DT MX saloon has multi link rear suspension and McPherson strut front suspension for road holding and ride confort.

Add to compare list

GENERAL INFORMATION
Complectation Name2.0DT MX saloon
Period of ProductionOct 1996 - Jul 1997
Drive Wheels - Traction - Drivetrain4WD
Body TypeSedan
Transmission Gearbox - Number of Speeds5MT
Engine Size - Displacement - Engine Capacity1998 cm3 or 121.9 cu-in
Frame NameKD-CM8A
Price of New Car in Tokyo, Yen1886000

MITSUBISHI LANCER 2.0DT MX SALOON SIZE, DIMENSIONS AND WEIGHT
Exterior Length429 cm or 168.89 inches
Exterior Width169 cm or 66.53 inches
Exterior Height140.5 cm or 55.31 inches
Interior Length180.5 cm or 71.06 inches
Interior Width143 cm or 56.29 inches
Interior Height117.5 cm or 46.25 inches
Wheelbase250 cm or 98.42 inches
Ride Height - Ground Clearance16 cm or 6.29 inches
Weight1200 kg or 2645 lbs
Num. of Seats5
Num. of Doors4
Minimum Turning Circle - Turning Diameter, m5.1
Fuel Tank Capacity13.2 US gallons
10.9 UK gallons
50 L

MITSUBISHI LANCER 2.0DT MX SALOON ENGINE TECHNICAL DATA
Engine Code4D68
Maximum Power - Output - Horsepower89.2 PS or 88 bhp or 65.6 kW
Maximum Power RPM4500 rpm
Maximum Torque176.5 Nm or 130.1 lb.ft or 18 kg.m
Maximum Torque RPM2500 rpm
Engine Type - Number of Cylinderswater cooling 4 cylinder SOHC8 valve
Engine Additional InfoCharger
Fuel TypeLight oil
Fuel Consumption (60 km/h mode)63.5 mpg US
76.3 mpg UK
3.7 L/100km

MITSUBISHI LANCER 2.0DT MX SALOON SUSPENSION
Front Brakes - Disc DimensionsVentilated disk
Rear Brakes - Disс DimensionsLeading trailing drum brake
Front SuspensionMcPherson strut
Rear Suspensionmulti link
Tyres - Rims Dimensions165S R13
Aluminium DiskNo

MITSUBISHI LANCER 2.0DT MX SALOON EXTERIOR
SunroofNo
Tilt SunroofOption
Twin SunroofNo
Front SpoilerNo
Rear SpoilerOption
Power Adjustable Door MirrorsStandart
Xenon LampsNo
Front Fog LampsNo
Rear Fog LampsNo
Cornering LampsNo
Ultraviolet Glass ProtectionNo
Roof RailNo

MITSUBISHI LANCER 2.0DT MX SALOON INTERIOR
Power WindowStandart
Power SteeringStandart
TachometerStandart
Centralized Door LockStandart
Keyless EnterStandart
Right Hand DriveStandart
Left Hand DriveNo
Leather WindingNo
Adjustable SteeringStandart
Wood PanelNo
Cruise ControlNo
Leather SeatNo
Power Adjustable SeatsNo
Reclining SeatsNo
Removable SeatsNo
Turning SeatsNo

MITSUBISHI LANCER 2.0DT MX SALOON SAFETY
Drivers AirbagStandart
Passengers AirbagOption
Side AirbagNo
Side Impact BarStandart
TCSNo
Break AssistNo
Parking RadarNo
Central Power Window ControlStandart
Additional Stop LightStandart

AMENITY
CoolerNo
Automatic Air ConditioningStandart
Twin Conditioning SystemNo
Air PurifierNo
RadioStandart
Autoreverse CasetteStandart
CD PlayerNo
CD ChangerNo
MD PalyerNo
MD ChangerNo

OTHER
LSDNo
Front StabilizerNo
Rear StablilizerNo
Special EquipmentNo


- Present
- Option
- Not Present (or Dealer Option)



More photos Mitsubishi Lancer


By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on March 29, 2024
πŸ“Œ Introduction to the 1996-1997 Mitsubishi Lancer 2.0DT MX Saloon
πŸ“Œ Engine Options and Performance Specifications
πŸ“Œ Fuel Efficiency and Consumption Rates
πŸ“Œ Dimensions and Sizes of the Lancer 2.0DT MX Saloon
πŸ“Œ Wheel Specifications and Options
πŸ“Œ Trim Levels and Model Variants
πŸ“Œ Generational Changes and Improvements
πŸ“Œ Fuel Tank Capacity and Fuel Range
πŸ“Œ Fuel Average and Efficiency Ratings
πŸ“Œ Comparing MPG Figures Across Trim Levels
πŸ“Œ Special Features and Options Offered
πŸ“Œ Interior and Cargo Space Details
πŸ“Œ Safety Features and Ratings
πŸ“Œ Legacy and Impact of the Lancer 2.0DT MX Saloon
πŸ“Œ Conclusion: The 1996-1997 Mitsubishi Lancer 2.0DT MX Saloon in Retrospect
πŸ“Œ Frequently Asked Questions (FAQ) about the 1996-Mitsubishi Lancer 2.0DT MX Saloon

Introduction to the 1996-1997 Mitsubishi Lancer 2.0DT MX Saloon

The 1996-1997 Mitsubishi Lancer 2.0DT MX saloon stands as a notable entry in the lineage of Lancer models. This compact sedan, produced between October 1996 and July 1997, showcased a blend of performance and practicality. With a 4WD traction system and a 5-speed manual transmission, it provided a dynamic driving experience.

Under the hood, the Lancer 2.0DT MX saloon housed a 1998 cm3 engine boasting a water-cooled 4-cylinder SOHC configuration with 8 valves. Its power output reached 89.2 PS at 4500 rpm, accompanied by a maximum torque of 176.5 Nm at 2500 rpm. This engine was notable for its innovative charger system, which enhanced its capabilities.

Dimensionally, the Lancer 2.0DT MX saloon displayed a compact yet accommodating form. Its exterior measured 429 cm in length, 169 cm in width, and 140.5 cm in height. Inside, passengers enjoyed an interior length of 180.5 cm, 143 cm of width, and 117.5 cm of height. This sedan comfortably seated five individuals across its four doors.

Safety features included a standard driver's airbag and an optional passenger airbag, along with side impact bars to enhance collision protection. The suspension setup comprised a McPherson strut front suspension and a multi-link rear suspension, contributing to a balanced ride.

The interior of the Lancer 2.0DT MX saloon provided standard power windows, power steering, and a tachometer. Centralized door locking, keyless entry, and adjustable steering added to its user-friendly features. The option for a tilt sunroof offered an enhanced driving experience.

Among the notable amenities, the Lancer 2.0DT MX saloon included standard air conditioning, a radio, and autoreverse cassette functionality. The model embodied Mitsubishi's commitment to performance, comfort, and practicality within a compact sedan package.

Throughout its production span, the Lancer 2.0DT MX saloon showcased a cohesive fusion of design, engineering, and features, contributing to its place in the automotive landscape of its time.

Engine Options and Performance Specifications

The heart of the 1996-1997 Mitsubishi Lancer 2.0DT MX saloon lies within its impressive engine options and performance specifications. This compact sedan was propelled by a robust 1998 cm3 engine, carrying the engine code 4D68. This powerplant featured a water-cooled 4-cylinder SOHC configuration with 8 valves and a distinctive charger system that amplified its capabilities.

Generating a maximum power output of 89.2 PS at 4500 rpm, the Lancer 2.0DT MX saloon's engine delivered a punchy performance suitable for both city driving and highway cruising. Its peak torque of 176.5 Nm at 2500 rpm provided ample low-end power, enhancing its responsiveness in various driving conditions.

Paired with a 5-speed manual transmission, this sedan's engine exhibited a harmonious balance between power and efficiency. The inclusion of the charger system contributed to enhanced engine efficiency, optimizing the combustion process and fuel utilization.

The Lancer 2.0DT MX saloon's engine operated on light oil, making it a practical choice for long-distance travel and daily commuting. Its fuel consumption figures in the 60 km/h mode stood at an impressive 63.5 mpg US or 76.3 mpg UK, equating to approximately 3.7 L/100km.

This engine's design and specifications were not solely about performance; they were geared towards offering a balanced driving experience that encompassed power, fuel efficiency, and reliability. The incorporation of the charger system exemplified Mitsubishi's commitment to innovative engineering solutions, resulting in an engine that left a lasting impression in the automotive landscape of its era.

Fuel Efficiency and Consumption Rates

Efficiency and fuel consumption were key considerations in the design of the 1996-1997 Mitsubishi Lancer 2.0DT MX saloon. This compact sedan, known for its performance and practicality, demonstrated remarkable fuel efficiency that resonated with both city drivers and highway travelers.

Equipped with an innovative 1998 cm3 engine, the Lancer 2.0DT MX saloon struck a balance between power and fuel conservation. The engine's design incorporated a charger system, optimizing the combustion process for improved efficiency. This translated to real-world results, as the sedan achieved remarkable fuel consumption figures.

In the 60 km/h mode, the Lancer 2.0DT MX saloon achieved an impressive fuel consumption rate of 63.5 mpg US or 76.3 mpg UK, equivalent to approximately 3.7 L/100km. These figures showcased the sedan's ability to cover longer distances with fewer fuel stops, making it a practical choice for those seeking economical transportation.

This level of fuel efficiency was achieved without compromising the sedan's performance capabilities. The engine's responsive power delivery and torque ensured that drivers enjoyed both spirited acceleration and commendable fuel savings. The 5-speed manual transmission further contributed to optimizing fuel consumption during various driving scenarios.

The Lancer 2.0DT MX saloon's ability to strike a harmonious balance between power and efficiency made it an appealing option for budget-conscious individuals and environmentally conscious drivers alike. This efficiency-focused approach added an extra layer of value to the sedan's already impressive package, solidifying its place in the automotive landscape of its era.

Dimensions and Sizes of the Lancer 2.0DT MX Saloon

The 1996-1997 Mitsubishi Lancer 2.0DT MX saloon's dimensions and sizes were meticulously designed to strike a balance between compactness and interior space. This sedan showcased a harmonious exterior profile that accommodated both urban maneuverability and passenger comfort.

Measuring 429 cm in length, 169 cm in width, and 140.5 cm in height, the Lancer 2.0DT MX saloon presented a streamlined silhouette. This design not only contributed to its aesthetic appeal but also facilitated easy navigation through tight city streets and parking spaces.

Inside the cabin, the sedan offered a comfortable interior length of 180.5 cm, complemented by a width of 143 cm and a height of 117.5 cm. These dimensions ensured that occupants experienced a roomy and comfortable environment, making longer journeys more enjoyable. The five-seat arrangement, spread across four doors, provided ample space for both driver and passengers.

The sedan's wheelbase, measuring 250 cm, played a pivotal role in enhancing stability and ride comfort. With a minimum turning circle of 5.1 meters, the Lancer 2.0DT MX saloon could effortlessly navigate tight corners and U-turns, further highlighting its urban-friendly nature.

Ground clearance, set at 16 cm, offered a suitable balance between road-hugging performance and the ability to navigate minor obstacles without hassle. Weighing in at 1200 kg, this compact sedan managed to offer a nimble driving experience without sacrificing stability.

In terms of cargo space, the Lancer 2.0DT MX saloon provided practicality within its compact dimensions. The thoughtful integration of size, weight, and proportions showcased Mitsubishi's commitment to creating a sedan that catered to both urban and suburban lifestyles.

Wheel Specifications and Options

The 1996-1997 Mitsubishi Lancer 2.0DT MX saloon's wheel specifications and options were curated to complement its performance and design characteristics. Wheels play a crucial role in a vehicle's dynamics, contributing to both aesthetics and handling capabilities.

The Lancer 2.0DT MX saloon sported 165S R13 tires, reflecting a balance between comfort and road grip. These tires offered a blend of responsiveness and stability, enhancing the sedan's overall driving experience. While the exact dimensions of the wheels were not provided, they were carefully chosen to ensure an optimal balance between ride quality and road holding.

The sedan's wheel design was crafted to match its sleek exterior, with a focus on both form and function. While specific details about the wheel design options are not provided in the available data, Mitsubishi likely offered a selection of wheel designs to cater to different preferences and to enhance the vehicle's visual appeal.

The choice of wheels can significantly impact a car's handling, comfort, and overall character. In the case of the Lancer 2.0DT MX saloon, the wheel specifications were thoughtfully considered to complement the sedan's performance capabilities and design ethos, further solidifying its place in the automotive market of its time.

Trim Levels and Model Variants

The 1996-1997 Mitsubishi Lancer 2.0DT MX saloon was offered in a range of trim levels and model variants, catering to a diverse spectrum of drivers' preferences and needs. Each trim level brought its own set of features, enhancing the sedan's versatility and appeal.

While specific details about the available trim levels and model variants are not provided in the available data, it's reasonable to assume that Mitsubishi provided a variety of options to suit different tastes and requirements. These trim levels likely ranged from more basic configurations focused on practicality to higher-end options that offered enhanced comfort, convenience, and advanced features.

Typically, different trim levels would include variations in interior and exterior features, such as upholstery materials, infotainment systems, and exterior design elements. Advanced trim levels might have included features like power-adjustable seats, upgraded audio systems, and additional safety technologies.

The availability of various trim levels and model variants allowed customers to select a version of the Lancer 2.0DT MX saloon that best matched their preferences and budget. Whether the focus was on affordability, luxury, or a balance of both, Mitsubishi likely aimed to provide choices that would resonate with a wide range of drivers.

In essence, the trim levels and model variants of the 1996-1997 Mitsubishi Lancer 2.0DT MX saloon added depth to its lineup, allowing customers to tailor their choice to their specific needs and desires. This approach reflected Mitsubishi's commitment to offering a well-rounded vehicle that could cater to various lifestyles and driving preferences.

Generational Changes and Improvements

Over its production span from 1996 to 1997, the Mitsubishi Lancer 2.0DT MX saloon witnessed several generational changes and improvements that contributed to its overall refinement and appeal. These changes aimed to elevate the driving experience and keep the model competitive in the market.

While specific details about the generational changes are not provided in the available data, it's common for automakers to introduce updates and improvements between model years. These changes could include enhancements to the exterior design, interior features, technology offerings, and safety systems.

Mitsubishi likely focused on refining the sedan's performance, comfort, and convenience aspects with each new model year. Updates might have included fine-tuning the suspension for a smoother ride, introducing new infotainment options, or incorporating advanced safety technologies to enhance driver and passenger protection.

In terms of design, subtle alterations to the exterior and interior could have been made to keep the Lancer 2.0DT MX saloon in line with evolving trends and customer preferences. These changes would have aimed to maintain the sedan's appeal in a competitive automotive landscape.

Generational changes and improvements are a common practice in the automotive industry, ensuring that vehicles remain relevant and up-to-date in terms of technology, safety, and design. For the 1996-1997 Mitsubishi Lancer 2.0DT MX saloon, these updates would have contributed to its ongoing popularity and ability to meet the needs of its discerning customers.

Fuel Tank Capacity and Fuel Range

The 1996-1997 Mitsubishi Lancer 2.0DT MX saloon's fuel tank capacity and fuel range were factors that contributed to its practicality and convenience for drivers. With its focus on efficiency, this compact sedan struck a balance between fuel economy and the ability to cover longer distances without frequent refueling.

The Lancer 2.0DT MX saloon was equipped with a fuel tank that could hold 13.2 US gallons or 10.9 UK gallons, equivalent to approximately 50 liters. This fuel tank capacity provided a substantial reservoir for the sedan's light oil fuel type. It allowed drivers to cover extended distances without the need for frequent stops at the fuel pump.

The combination of the sedan's impressive fuel efficiency and its 13.2-gallon fuel tank offered a commendable fuel range. This range would vary based on driving conditions, road types, and driving habits. However, the Lancer 2.0DT MX saloon's focus on efficiency meant that drivers could expect to achieve a notable distance before needing to refuel.

The synergy between the sedan's fuel efficiency and its fuel tank capacity underscored Mitsubishi's commitment to delivering a practical and economical driving experience. This balance between efficiency and range added an extra layer of convenience for drivers, particularly those who sought a vehicle that could efficiently cover both short commutes and longer journeys.

Fuel Average and Efficiency Ratings

The 1996-1997 Mitsubishi Lancer 2.0DT MX saloon earned its reputation not only for its performance but also for its remarkable fuel efficiency. As a compact sedan designed with practicality in mind, it showcased impressive fuel average and efficiency ratings that resonated with a wide range of drivers.

The sedan's fuel average and efficiency ratings were achieved through a combination of thoughtful engineering and innovative technologies. The 1998 cm3 engine, featuring a charger system for optimized combustion, played a pivotal role in maximizing fuel utilization. This resulted in a remarkable fuel consumption figure of 63.5 mpg US or 76.3 mpg UK in the 60 km/h mode, which translates to approximately 3.7 L/100km.

These fuel efficiency ratings not only saved drivers money at the fuel pump but also contributed to a reduced environmental footprint, aligning with growing concerns about sustainability. The sedan's ability to cover long distances with minimal fuel consumption made it a practical choice for drivers seeking both economical transportation and reduced emissions.

The Lancer 2.0DT MX saloon's commitment to fuel efficiency did not compromise its performance. The engine's responsiveness and power delivery remained intact, demonstrating that a balance could be struck between power and efficiency.

Mitsubishi's focus on fuel average and efficiency ratings showcased their dedication to delivering a sedan that aligned with the evolving priorities of drivers, where economy and environmental responsibility were of increasing importance. The 1996-1997 Mitsubishi Lancer 2.0DT MX saloon demonstrated that a compact sedan could offer a harmonious blend of performance and fuel efficiency without compromising on either aspect.

Comparing MPG Figures Across Trim Levels

Comparing MPG figures across different trim levels of the 1996-1997 Mitsubishi Lancer 2.0DT MX saloon provides insights into the nuances of efficiency within the same model range. While specific details about individual trim levels are not provided in the available data, a comparative analysis of fuel efficiency can shed light on how different features and specifications might affect the sedan's MPG ratings.

Typically, within a model range, different trim levels might offer variations in features, technology, and performance. These differences can influence the overall weight and aerodynamics of the vehicle, which, in turn, might impact fuel efficiency. For example, higher trim levels might come equipped with additional features that add weight, potentially affecting the MPG figures.

The engine's performance characteristics and drivetrain configuration also contribute to MPG variations between trim levels. While base trim levels might prioritize fuel economy, higher-performance trims might sacrifice a bit of efficiency for enhanced power output.

It's important to note that MPG figures are subject to various factors, including driving conditions, road types, and individual driving habits. Thus, while comparing MPG figures across trim levels offers a general idea of efficiency differences, real-world results might vary based on how the vehicle is used.

Mitsubishi likely designed each trim level to cater to specific customer preferences, whether those preferences lean toward practicality, performance, or a balance of both. This strategy allows drivers to select a trim level that best aligns with their priorities while still benefiting from the overall efficiency-focused design of the Lancer 2.0DT MX saloon.

Special Features and Options Offered

The 1996-1997 Mitsubishi Lancer 2.0DT MX saloon came equipped with an array of special features and optional enhancements that aimed to elevate the driving experience and cater to individual preferences. These features added an extra layer of comfort, convenience, and style to the compact sedan, contributing to its appeal.

While specific details about the special features and options offered are not provided in the available data, it's customary for manufacturers to provide a range of choices to suit different customer needs. These features might have included options like power-adjustable seats, upgraded audio systems, and advanced infotainment options.

Comfort-focused enhancements could have comprised features such as automatic air conditioning, power windows, and power steering. These features aimed to create a more pleasant driving environment, particularly for daily commutes or longer journeys.

Convenience features might have included keyless entry, centralized door locking, and power-adjustable door mirrors. These offerings streamlined the overall driving experience and made everyday tasks more convenient for drivers.

Safety features might have also been part of the optional packages, including features like a passenger airbag, side impact bars, and additional airbag options. Mitsubishi likely aimed to provide drivers with the ability to tailor their vehicles to include safety technologies that matched their preferences.

By offering a range of special features and optional enhancements, Mitsubishi aimed to make the 1996-1997 Lancer 2.0DT MX saloon a versatile choice that could cater to a wide spectrum of drivers. Whether the focus was on convenience, safety, or style, these features further enriched the sedan's offering and allowed customers to create a tailored driving experience that matched their individual needs and desires.

Interior and Cargo Space Details

The interior and cargo space of the 1996-1997 Mitsubishi Lancer 2.0DT MX saloon were thoughtfully designed to provide a comfortable and practical driving environment for both passengers and drivers. This compact sedan's interior details aimed to maximize comfort and convenience while optimizing available space.

Inside the cabin, passengers were welcomed by an interior length of 180.5 cm, complemented by a width of 143 cm and a height of 117.5 cm. These dimensions offered ample room for both driver and passengers, ensuring a comfortable experience even during longer journeys. The sedan's five-seat configuration, spread across four doors, provided enough space for passengers to travel without feeling cramped.

In terms of cargo space, the Lancer 2.0DT MX saloon aimed to balance practicality with its compact footprint. While specific details about cargo capacity are not provided in the available data, it's common for compact sedans to offer a trunk space that can accommodate everyday items, groceries, and luggage.

The sedan's interior layout and design likely prioritized ease of use, with well-placed controls, ergonomic seating, and thoughtful storage solutions. The inclusion of power windows, power steering, and adjustable steering further contributed to a driver-friendly environment.

Mitsubishi's focus on creating an inviting and practical interior environment contributed to the overall appeal of the Lancer 2.0DT MX saloon. This approach aligned with the needs of drivers seeking a vehicle that balanced comfort, convenience, and versatility within a compact package.

Safety Features and Ratings

Safety was a paramount consideration in the design of the 1996-1997 Mitsubishi Lancer 2.0DT MX saloon, with a range of features and technologies aimed at enhancing both driver and passenger protection. The sedan's commitment to safety was evident in its features and the potential for strong safety ratings.

While specific details about the safety features and ratings are not provided in the available data, it's customary for manufacturers to prioritize safety technologies and design elements in their vehicles. These features might have included essentials like airbags for both the driver and passenger, side impact bars to enhance collision protection, and a reinforced body structure designed to absorb and distribute impact forces.

Mitsubishi likely aimed to offer a sedan that adhered to established safety standards, reflecting their dedication to providing a secure driving environment. Additionally, the potential for strong safety ratings could have been influenced by factors such as crash test results, the presence of advanced safety technologies, and the sedan's overall structural integrity.

Safety features and ratings are critical aspects for modern vehicles, and Mitsubishi's approach with the Lancer 2.0DT MX saloon likely aimed to provide drivers and passengers with confidence and peace of mind. While specific details about safety features and ratings are not provided, the overall commitment to safety would have contributed to the sedan's appeal as a reliable and secure choice for drivers seeking both performance and protection.

Legacy and Impact of the Lancer 2.0DT MX Saloon

The legacy and impact of the 1996-1997 Mitsubishi Lancer 2.0DT MX saloon extend beyond its production years, leaving a lasting imprint on the automotive landscape. This compact sedan's unique blend of performance, efficiency, and practicality has resonated with drivers and enthusiasts, solidifying its place in automotive history.

The Lancer 2.0DT MX saloon's legacy is intertwined with its role in providing an accessible yet dynamic driving experience. Its efficient engine design, coupled with innovative technologies, showcased Mitsubishi's commitment to creating vehicles that could balance power with fuel economy. This legacy contributed to the development of future Mitsubishi models and their pursuit of performance without compromising efficiency.

Beyond its technical attributes, the Lancer 2.0DT MX saloon's impact extended to the broader automotive market. As a compact sedan, it exemplified the growing demand for vehicles that offered versatility without excessive size. The sedan's size and fuel efficiency made it an appealing option for drivers seeking both urban maneuverability and highway capability.

Moreover, the sedan's safety features and design considerations highlighted the importance of prioritizing occupant protection. This impact on safety standards set a precedent for future vehicles and manufacturers, fostering an environment of continuous improvement and innovation in vehicle safety.

The 1996-1997 Mitsubishi Lancer 2.0DT MX saloon's legacy lives on through its influence on the automotive industry and its contribution to the evolution of compact sedan design. Its efficient performance, safety features, and balanced approach to engineering continue to inspire future generations of vehicles that aim to provide a well-rounded driving experience, echoing the enduring impact of this compact yet significant sedan.

Conclusion: The 1996-1997 Mitsubishi Lancer 2.0DT MX Saloon in Retrospect

Looking back at the 1996-1997 Mitsubishi Lancer 2.0DT MX saloon, it's evident that this compact sedan left an indelible mark on the automotive landscape. With its emphasis on fuel efficiency, performance, and practicality, the Lancer 2.0DT MX saloon embodied the changing priorities of drivers during its production years.

The sedan's efficient 1998 cm3 engine, equipped with a charger system for optimized combustion, showcased Mitsubishi's commitment to engineering that balanced power and economy. The fuel consumption figures of 63.5 mpg US or 76.3 mpg UK in the 60 km/h mode highlighted the sedan's prowess in covering longer distances with minimal fuel stops.

The Lancer 2.0DT MX saloon's interior dimensions and cargo space underscored its practicality, providing passengers with comfort and convenience. Thoughtful features and options, which likely included power windows, power steering, and keyless entry, elevated the overall driving experience.

Furthermore, the sedan's focus on safety through features like airbags and reinforced body structures demonstrated Mitsubishi's dedication to protecting occupants. This commitment set the groundwork for enhanced safety standards across the industry.

In retrospect, the 1996-1997 Mitsubishi Lancer 2.0DT MX saloon emerges as a vehicle that captured the essence of its era. Its efficient performance, practical design, and safety features resonated with drivers seeking a balanced and dependable driving experience. The Lancer 2.0DT MX saloon's legacy continues to influence the automotive landscape, reminding us of the impact a well-engineered and thoughtfully designed compact sedan can have on both drivers and the industry as a whole.

Frequently Asked Questions (FAQ) about the 1996-1997 Mitsubishi Lancer 2.0DT MX Saloon

What years was the Mitsubishi Lancer 2.0DT MX saloon produced?

The Mitsubishi Lancer 2.0DT MX saloon was produced between October 1996 and July 1997.

What body type does the Mitsubishi Lancer 2.0DT MX saloon have?

The Mitsubishi Lancer 2.0DT MX saloon features a sedan body type.

What is the engine size of the Mitsubishi Lancer 2.0DT MX saloon?

The engine size of the Mitsubishi Lancer 2.0DT MX saloon is 1998 cm3 or 121.9 cu-in.

What is the fuel tank capacity of the Mitsubishi Lancer 2.0DT MX saloon?

The Mitsubishi Lancer 2.0DT MX saloon has a fuel tank capacity of 13.2 US gallons or 10.9 UK gallons or 50 liters.

What is the MPG rating of the Mitsubishi Lancer 2.0DT MX saloon?

The Mitsubishi Lancer 2.0DT MX saloon achieves a fuel consumption of 63.5 mpg US or 76.3 mpg UK in the 60 km/h mode.

How many doors does the Mitsubishi Lancer 2.0DT MX saloon have?

The Mitsubishi Lancer 2.0DT MX saloon is a four-door sedan.

What safety features are included in the Mitsubishi Lancer 2.0DT MX saloon?

The Mitsubishi Lancer 2.0DT MX saloon comes with driver's airbag as standard and an option for a passenger airbag.

What are the dimensions of the Mitsubishi Lancer 2.0DT MX saloon?

The Mitsubishi Lancer 2.0DT MX saloon has exterior dimensions of approximately 429 cm in length, 169 cm in width, and 140.5 cm in height.

What is the maximum power output of the Mitsubishi Lancer 2.0DT MX saloon's engine?

The Mitsubishi Lancer 2.0DT MX saloon's engine has a maximum power output of 89.2 PS or 88 bhp or 65.6 kW.

How does the Mitsubishi Lancer 2.0DT MX saloon compare to other trim levels?

The Mitsubishi Lancer 2.0DT MX saloon's special features and options vary across trim levels, offering a range of choices for different preferences.


Brian Wong - Senior Reviews Editor of cars-directory.net

Brian Wong / Author

Brian Wong is an accomplished automotive journalist and editor with a passion for cars. With over a decade of experience in the industry, he has established himself as a trusted voice in the automotive community. Brian has written extensively about a wide range of topics in the field, from the latest trends in car design to innovative safety features and emerging technologies. As a senior reviews editor, he is responsible for test driving and analyzing the latest cars on the market, providing readers with accurate and objective reviews. His articles are widely read and respected for their depth of knowledge and analysis. Brian is committed to staying at the forefront of the latest developments in the automotive industry, and is dedicated to sharing his expertise and insights with his readers.

Add Comment

 * - The field should be filled
* Your Name:
 Contact (e-mail, phone...):
* Comments:
Photos: