1991 Mitsubishi Minicab 660 2 seater high roof Specs

OVERVIEW

With a fuel consumption of 36.7 mpg US - 44.1 mpg UK - 6.4 L/100km, a weight of 1609 lbs (730 kg), the Mitsubishi Minicab 660 2 seater high roof has a water cooling 4 cycle SOHC4 valve 3 cylinder engine, a Regular gasoline engine 3G83. This engine 3G83 produces a maximum power of 48.6 PS (48 bhp - 35.7 kW) at 6000 rpm and a maximum torque of 58.8 Nm (43.3 lb.ft - 6 kg.m) at 3500 rpm. The engine power is transmitted to the road by the rear wheel drive (MID) with a 5MT gearbox. For stopping power, the Mitsubishi Minicab 660 2 seater high roof braking system includes Leading trailing drum brake at the rear and Disk at the front. Chassis details - Mitsubishi Minicab 660 2 seater high roof has semicircle leaf spring rear suspension and McPherson strut coil spring front suspension for road holding and ride confort.

Add to compare list

- Present
- Option
- Not Present (or Dealer Option)

• Search Car Specs
• Other Minicab Specs Database

By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on April 19, 2024

Introduction to the Mitsubishi Minicab 660

The Mitsubishi Minicab 660 2-seater high roof, produced from January 1991 to August 1999, represents a versatile and compact commercial van designed to meet the demands of urban transportation and small cargo handling. With its distinctive features and practicality, this vehicle gained recognition in its class.

Equipped with a mid-drive wheel configuration (MID) and a 5-speed manual transmission (5MT), the Minicab 660 offered an efficient and manageable driving experience. Its compact size and maneuverability made it an ideal choice for navigating crowded city streets and tackling delivery tasks with ease.

Under the hood, the Minicab 660 housed a 657 cm³ engine (Engine Code: 3G83) capable of delivering 48.6 horsepower (48 bhp) at 6000 rpm and 58.8 Nm of torque at 3500 rpm. This water-cooled 4-cycle SOHC 3-cylinder engine ensured reliable performance, while its fuel efficiency was noteworthy, with a fuel consumption rate of 36.7 mpg in the 10/15 mode and an impressive 56 mpg in the 60 km/h mode.

In terms of dimensions, the Minicab 660 boasted an exterior length of 329.5 cm, a width of 139.5 cm, and a height of 193 cm. With a wheelbase of 192 cm and a ground clearance of 17 cm, it struck a balance between compactness and functionality. This commercial van had a total weight of 730 kg and featured seating for two occupants across five doors.

The Minicab 660 came standard with a McPherson strut coil spring front suspension and a semicircle leaf spring rear suspension, contributing to its stability and load-carrying capability. It rolled on 5.00-12-4PR tires mounted on standard aluminum disks.

While not equipped with extravagant exterior or interior amenities, the Minicab 660 prioritized practicality for its intended commercial use. It did not feature a sunroof, power-adjustable door mirrors, xenon lamps, or elaborate entertainment systems. Instead, its focus remained on reliability and efficient transportation.

Safety features such as airbags, side impact bars, and advanced driving aids like TCS and brake assist were not part of its package. The Minicab 660 catered to drivers seeking a straightforward and economical solution for their business or transportation needs.

In summary, the 1991-1999 Mitsubishi Minicab 660 2-seater high roof offered a no-frills approach to urban commercial transportation. With its compact size, economical engine, and practical design, it was a workhorse suitable for various small-scale hauling and delivery tasks.

Overview of Model Years

The 1991-1999 Mitsubishi Minicab 660 2-seater high roof underwent a noteworthy evolution over its production span, with each model year introducing subtle changes and improvements. This overview provides insight into the key distinctions across the model years.

1991-1995 Models:
The early years of the Minicab 660 saw the introduction of the base and deluxe models. These models featured a choice of engines, primarily the 3G83 and 3G81, offering varying power outputs and fuel efficiency. Customers could select between standard and deluxe trim levels, tailoring the vehicle to their specific needs.

1996-1999 Models:
As the Minicab 660 moved into the late '90s, it continued to offer the base and deluxe models, but with a notable addition: the 3G83T engine. This turbocharged engine provided enhanced power and performance, catering to those seeking a bit more oomph in their compact commercial van.

Throughout its production run, the Minicab 660 maintained a consistent body type as a commercial van. Its exterior dimensions and compact design made it well-suited for urban driving and cargo transport. While exterior features remained modest, the focus was on practicality and functionality rather than luxury or aesthetics.

The transmission system also remained unchanged, with a reliable 5-speed manual gearbox providing control to the driver.

Overall, the 1991-1999 Mitsubishi Minicab 660 2-seater high roof demonstrated a commitment to delivering a dependable and versatile commercial vehicle. Whether in its early years with base and deluxe models or in its later years with the added turbocharged option, it remained a reliable choice for businesses and individuals looking for efficient urban transport and cargo-carrying capability.

Engine Specifications

The engine specifications of the 1991-1999 Mitsubishi Minicab 660 2-seater high roof played a crucial role in defining the performance and capabilities of this compact commercial van. Let's delve into the details of the engine that powered this versatile vehicle.

Engine Code: 3G83
At the heart of the Minicab 660 was the 3G83 engine. This powerplant was a 657 cm³, 3-cylinder, water-cooled engine designed for efficiency and reliability. Its 4-cycle single overhead camshaft (SOHC) configuration, coupled with four valves per cylinder, contributed to efficient fuel combustion and power delivery.

Maximum Power Output: 48.6 PS (48 bhp) at 6000 rpm
The 3G83 engine produced a maximum power output of 48.6 PS (48 brake horsepower) at 6000 revolutions per minute (rpm). This level of power was well-suited for the Minicab 660's intended urban and commercial applications, providing ample acceleration and performance for its size.

Maximum Torque: 58.8 Nm (43.3 lb.ft) at 3500 rpm
Torque is a critical factor in the engine's ability to handle various loads and driving conditions. The 3G83 engine delivered a maximum torque of 58.8 Newton-meters (43.3 pound-feet) at 3500 rpm, ensuring the Minicab 660 could manage its cargo and passengers effectively.

Engine Type: Water Cooling 4 Cycle SOHC 3 Cylinder
This engine type highlighted the Minicab 660's focus on efficiency and durability. Water cooling helped regulate engine temperatures, while the 4-cycle design and SOHC technology ensured smooth and efficient operation.

Fuel Type: Regular Gasoline
The Minicab 660 ran on regular gasoline, a readily available and cost-effective fuel source. This choice contributed to its affordability and practicality for daily urban use.

Fuel Consumption:
- In the 10/15 mode: 36.7 miles per gallon (mpg) US, 44.1 mpg UK, or 6.4 liters per 100 kilometers.
- In the 60 km/h mode: 56 mpg US, 67.2 mpg UK, or 4.2 liters per 100 kilometers.

These fuel consumption figures reflected the Minicab 660's excellent fuel efficiency, making it a budget-friendly choice for owners concerned about operating costs.

In summary, the engine specifications of the 1991-1999 Mitsubishi Minicab 660 2-seater high roof highlighted its efficiency, reliability, and suitability for urban transportation and commercial use. The 3G83 engine's power and torque figures, coupled with its economical fuel consumption, contributed to the vehicle's reputation as a practical and dependable choice in its class.

Dimensions and Sizes

Understanding the dimensions and sizes of the 1991-1999 Mitsubishi Minicab 660 2-seater high roof is essential to appreciate its compact yet practical design. This commercial van was purpose-built to navigate city streets while offering efficient cargo space. Here's a breakdown of its key dimensions and sizes:

Exterior Length: The Minicab 660 measured approximately 329.5 cm (129.72 inches) in length. This compact size allowed for easy maneuverability in congested urban environments, making it an ideal choice for businesses and individuals operating in cities.

Exterior Width: With a width of about 139.5 cm (54.92 inches), the Minicab 660 struck a balance between being narrow enough to navigate tight spaces and wide enough to provide ample interior room for cargo and passengers.

Exterior Height: The vehicle stood at a height of approximately 193 cm (75.98 inches). This height facilitated ease of entry and exit for passengers and ensured that the van could fit comfortably into standard parking spaces.

Wheelbase: The Minicab 660 had a wheelbase of around 192 cm (75.59 inches). This relatively short wheelbase contributed to its agility and nimbleness, allowing it to negotiate sharp turns and crowded streets with ease.

Ride Height - Ground Clearance: The Minicab 660 offered a ground clearance of approximately 17 cm (6.69 inches). This clearance struck a balance between urban usability and the ability to handle varying road conditions without bottoming out.

Weight: The vehicle had a curb weight of about 730 kg (1609 lbs), making it lightweight and efficient. This weight contributed to its fuel efficiency and overall agility.

Number of Seats: Inside the cabin, the Minicab 660 featured seating for two occupants, providing a practical solution for driver and passenger needs.

Number of Doors: The van came equipped with five doors, offering convenient access to both the driver and cargo areas. This design catered to its commercial and urban utility.

Minimum Turning Circle - Turning Diameter: With a minimum turning circle of approximately 3.9 meters, the Minicab 660 excelled in tight maneuvering situations, ensuring drivers could navigate narrow streets and parking lots without hassle.

Fuel Tank Capacity: The vehicle's fuel tank had a capacity of 10.5 US gallons (8.7 UK gallons or 40 liters), contributing to its range and suitability for city use.

In summary, the 1991-1999 Mitsubishi Minicab 660 2-seater high roof featured dimensions and sizes that emphasized maneuverability, urban practicality, and the ability to handle various cargo needs. Its compact yet spacious design made it a popular choice for businesses and individuals looking for an efficient and versatile commercial van.

Fuel Tank Capacity

The fuel tank capacity of the 1991-1999 Mitsubishi Minicab 660 2-seater high roof was a vital specification that played a significant role in its usability and efficiency. Understanding this capacity provides insights into the vehicle's range and suitability for various purposes.

Fuel Tank Capacity: 10.5 US Gallons, 8.7 UK Gallons, or 40 Liters

The Minicab 660 was equipped with a fuel tank capable of holding approximately 10.5 US gallons, which is equivalent to roughly 8.7 UK gallons or 40 liters of fuel. This capacity allowed the vehicle to cover significant distances between refueling stops, making it a practical choice for urban and commercial use.

With a focus on efficiency, the Minicab 660's fuel tank capacity struck a balance between providing a reasonable range and keeping the vehicle's weight and size in check. This aspect was especially important for businesses and drivers who needed a reliable and cost-effective mode of transportation within city limits.

The 10.5 US gallon (40-liter) capacity complemented the van's economical engine and contributed to its reputation for fuel efficiency. Whether used for deliveries, urban commuting, or small-scale cargo transport, the Minicab 660's fuel tank capacity ensured that it could perform its tasks without frequent interruptions for refueling.

In summary, the 1991-1999 Mitsubishi Minicab 660 2-seater high roof's fuel tank capacity of approximately 10.5 US gallons (8.7 UK gallons or 40 liters) was a crucial component that aligned with its purpose as a practical and economical urban commercial van. This capacity provided both convenience and cost savings to owners and operators.

Fuel Consumption

Fuel consumption is a crucial aspect of any vehicle, and the 1991-1999 Mitsubishi Minicab 660 2-seater high roof excelled in this regard. Its economical engine and design made it a cost-effective choice for those seeking efficient urban transportation. Let's delve into the details of its fuel consumption.

Fuel Consumption (10/15 Mode):
In the 10/15 mode, which simulates urban driving conditions, the Minicab 660 demonstrated impressive fuel efficiency. While exact figures may vary depending on factors such as driving habits and load, the vehicle typically achieved a fuel consumption rate of approximately 36.7 miles per gallon (mpg) in the United States, equivalent to around 44.1 mpg in the United Kingdom or 6.4 liters per 100 kilometers.

This level of efficiency made the Minicab 660 an economical choice for daily city commuting and short-distance travel. It helped owners save on fuel costs while reducing their environmental footprint.

Fuel Consumption (60 km/h Mode):
When operating under steady-state conditions at 60 kilometers per hour (about 37 mph), the Minicab 660 excelled even further in fuel efficiency. It achieved an estimated fuel consumption rate of approximately 56 mpg in the United States, equivalent to around 67.2 mpg in the United Kingdom or 4.2 liters per 100 kilometers.

This level of efficiency showcased the vehicle's ability to maximize fuel economy during highway driving, making it a versatile option for both urban and intercity travel. Owners could enjoy longer journeys without frequent stops for refueling.

In summary, the 1991-1999 Mitsubishi Minicab 660 2-seater high roof impressed with its remarkable fuel efficiency. Whether navigating city streets or cruising on the highway, this commercial van offered economical fuel consumption figures that contributed to cost savings and reduced environmental impact, making it a practical choice for a wide range of transportation needs.

Fuel Average (MPG)

Understanding the fuel average, often measured in miles per gallon (MPG), is essential when assessing the efficiency and cost-effectiveness of a vehicle. The 1991-1999 Mitsubishi Minicab 660 2-seater high roof was known for its impressive fuel economy, and its MPG figures reflected this efficiency.

Fuel Average (MPG):

The Minicab 660 delivered noteworthy fuel economy figures, providing drivers with an economical and budget-friendly transportation solution. While actual MPG can vary based on driving conditions and individual driving habits, here's an overview of the vehicle's fuel averages:

- In the 10/15 mode, which simulates urban driving conditions, the Minicab 660 typically achieved an estimated fuel consumption rate of approximately 36.7 miles per gallon (mpg) in the United States. This equates to around 44.1 mpg in the United Kingdom or 6.4 liters per 100 kilometers. These figures showcased the van's ability to efficiently navigate city streets and short-distance commutes while keeping fuel costs in check.

- In the 60 km/h mode, which represents steady-state highway driving at around 60 kilometers per hour (about 37 mph), the Minicab 660 demonstrated even greater fuel efficiency. It achieved an estimated fuel consumption rate of approximately 56 mpg in the United States, equivalent to around 67.2 mpg in the United Kingdom or 4.2 liters per 100 kilometers. These numbers highlighted the vehicle's capability to maximize fuel economy during long highway journeys, making it a versatile choice for various travel needs.

In summary, the 1991-1999 Mitsubishi Minicab 660 2-seater high roof stood out for its impressive fuel averages, both in urban and highway driving scenarios. These efficiency figures not only translated to cost savings for owners but also positioned the Minicab 660 as an environmentally conscious option with reduced fuel consumption and emissions.

Trim Levels and Features

The 1991-1999 Mitsubishi Minicab 660 2-seater high roof was offered in various trim levels, each designed to cater to specific preferences and requirements. While the focus of this compact commercial van was on utility and efficiency, different trim levels and features allowed customers to choose a configuration that best suited their needs. Here's an overview of the available trim levels and features:

Base Model:
- The base model of the Minicab 660 provided a practical and economical choice for those seeking a straightforward and budget-friendly commercial van.
- While it may not have included many extravagant features, it offered reliability and efficiency for urban transportation and small cargo hauling.
- The base model typically came with essential amenities and was designed for practicality and cost-effectiveness.

Deluxe Model:
- The deluxe model of the Minicab 660 added a touch of comfort and convenience to the equation.
- It often featured enhancements such as improved interior materials, added storage compartments, and additional comfort features for the driver and passenger.
- While not luxurious by traditional standards, the deluxe model aimed to make daily driving more pleasant and efficient.

Common Features:
- Both trim levels typically shared core features that emphasized practicality and utility.
- The Minicab 660 included a 5-speed manual transmission (5MT) for precise control over gear shifts, contributing to its efficiency.
- It featured a reliable and economical 3-cylinder engine (Engine Code: 3G83) designed to deliver cost-effective performance.
- The van's compact dimensions and modest exterior design made it suitable for navigating busy urban streets and fitting into tight parking spaces.
- Its lightweight construction contributed to its fuel efficiency and agility.
- The Minicab 660 often featured a straightforward and functional interior with seating for two occupants and ample cargo space.

In summary, the 1991-1999 Mitsubishi Minicab 660 2-seater high roof offered a choice between base and deluxe trim levels, allowing customers to tailor their purchase to their specific needs. Whether prioritizing affordability, enhanced features, or a combination of both, these trim options provided versatility and utility in a compact commercial van.

Wheel Options

Wheel options play a crucial role in a vehicle's performance, handling, and overall functionality. The 1991-1999 Mitsubishi Minicab 660 2-seater high roof was designed with practicality and efficiency in mind, and its wheel options were no exception. Let's explore the details of the wheel choices available for this compact commercial van:

Wheel Dimensions: The Minicab 660 typically rolled on wheels with the dimensions of 5.00-12-4PR. These dimensions emphasized durability and reliability, which were essential characteristics for a vehicle designed for commercial use. The use of sturdy tires ensured the van could withstand the demands of urban driving and cargo transport.

Aluminium Disk (Standard): The Minicab 660 often featured standard aluminum disks. While the focus of this vehicle was on practicality and utility, the inclusion of aluminum disks added a touch of durability to the wheel design. Aluminum disks are known for their resistance to corrosion, which was beneficial for a vehicle that might encounter various weather conditions in its daily use.

The wheel options for the Minicab 660 were in line with the vehicle's overall design philosophy of efficiency and reliability. While not flashy or designed for high-performance purposes, they complemented the van's mission as a practical and cost-effective solution for urban transportation and cargo handling.

In summary, the 1991-1999 Mitsubishi Minicab 660 2-seater high roof featured wheel options designed to prioritize durability and reliability. These wheels, with their sturdy tires and standard aluminum disks, contributed to the van's ability to navigate urban streets and handle various loads efficiently.

Comparing Generations

Comparing the different generations of the 1991-1999 Mitsubishi Minicab 660 2-seater high roof provides valuable insights into how this compact commercial van evolved over its production years. While the core design and purpose remained consistent, subtle changes and improvements were introduced to meet changing market demands and technological advancements.

First Generation (1991-1995):
- The initial years of the Minicab 660 saw the introduction of the base and deluxe models.
- These models were equipped with engines such as the 3G83 and 3G81, offering varying power outputs and fuel efficiency.
- The focus was on providing an economical and practical solution for urban transportation and small cargo handling.
- The first generation laid the foundation for the van's reputation as a reliable and efficient workhorse.

Second Generation (1996-1999):
- As the 1990s progressed, the Minicab 660 continued to cater to the needs of businesses and individuals.
- The second generation retained the base and deluxe models but introduced a notable addition: the 3G83T engine.
- This turbocharged engine provided enhanced power and performance, appealing to those seeking a bit more acceleration and versatility.
- The introduction of the turbocharged engine demonstrated Mitsubishi's commitment to keeping the Minicab 660 competitive and adaptable.

Throughout both generations, the Minicab 660 maintained its distinctive compact commercial van body type, emphasizing efficiency and practicality. The core features of a 5-speed manual transmission (5MT) and reliable engine technology remained consistent, ensuring that the van retained its reputation for affordability and dependability.

In summary, comparing the generations of the 1991-1999 Mitsubishi Minicab 660 2-seater high roof highlights the vehicle's ability to adapt to changing needs and technologies while staying true to its core principles of efficiency and utility. Whether in its early years with base and deluxe models or in its later years with the turbocharged engine option, the Minicab 660 continued to serve as a reliable choice for urban transportation and small cargo transport.

Fuel Efficiency and Cost Savings

Fuel efficiency and cost savings were at the forefront of the 1991-1999 Mitsubishi Minicab 660 2-seater high roof's design and appeal. This compact commercial van was engineered to provide owners with a practical and economical transportation solution. Let's delve into the details of how it achieved impressive fuel efficiency and delivered cost savings:

Efficient Engine Design: At the heart of the Minicab 660 was its efficient 3-cylinder engine (Engine Code: 3G83). This powerplant was designed to deliver the right balance of power and economy. With features like water cooling, a 4-cycle design, and single overhead camshaft (SOHC) technology, it ensured that fuel was burned efficiently, maximizing mileage.

Urban-Focused Fuel Efficiency: In urban driving conditions (10/15 mode), the Minicab 660 typically achieved a fuel consumption rate of approximately 36.7 miles per gallon (mpg) in the United States, equivalent to around 44.1 mpg in the United Kingdom or 6.4 liters per 100 kilometers. These figures demonstrated its prowess in efficiently navigating city streets and handling stop-and-go traffic while keeping fuel costs in check.

Highway Fuel Economy: On the highway, the Minicab 660 further excelled in fuel efficiency. At a steady speed of around 60 kilometers per hour (about 37 mph), it achieved an estimated fuel consumption rate of approximately 56 mpg in the United States, equivalent to around 67.2 mpg in the United Kingdom or 4.2 liters per 100 kilometers. This capability allowed owners to embark on longer journeys without frequent stops for refueling, translating to additional cost savings.

Lightweight and Practical Design: The Minicab 660's compact dimensions, lightweight construction, and aerodynamic design contributed to its overall fuel efficiency. It was engineered to be agile and easy to maneuver, making it suitable for urban environments.

Budget-Friendly Operation: With its economical engine and impressive fuel efficiency figures, the Minicab 660 offered owners a budget-friendly mode of transportation. Reduced fuel consumption meant fewer visits to the gas station and lower overall operating costs.

In summary, the 1991-1999 Mitsubishi Minicab 660 2-seater high roof was a prime example of a vehicle designed to prioritize fuel efficiency and cost savings. Its efficient engine, urban and highway fuel economy, lightweight design, and practicality made it an ideal choice for businesses and individuals looking to maximize their transportation budget while minimizing their environmental impact.

Conclusion and Verdict

In conclusion, the 1991-1999 Mitsubishi Minicab 660 2-seater high roof was a compact commercial van that left a lasting impression in the world of urban transportation and small cargo handling. Throughout its production years, it consistently prioritized efficiency, reliability, and practicality. Here's a recap of its key attributes and why it remains a notable choice:

Efficiency and Fuel Economy: The Minicab 660 boasted impressive fuel efficiency figures, making it a cost-effective option for daily urban commuting and short-distance cargo transport. Its ability to excel in both urban and highway fuel economy scenarios underscored its versatility.

Compact and Agile: The van's compact dimensions and lightweight construction made it highly maneuverable in congested city environments. It could navigate narrow streets and fit into tight parking spaces with ease.

Reliable Engine: Powered by the efficient 3-cylinder 3G83 engine, the Minicab 660 offered dependable performance and reduced operating costs. Its design emphasized durability and longevity.

Practical Design: With seating for two occupants and ample cargo space, the Minicab 660 catered to the needs of small business owners, couriers, and urban commuters. Its utilitarian interior and straightforward features made it a functional choice.

Variety of Trim Levels: The availability of base and deluxe trim levels allowed customers to choose a configuration that aligned with their budget and requirements. This flexibility contributed to its broad appeal.

Adaptability: Over its production years, the Minicab 660 evolved to meet changing demands, introducing options like the turbocharged 3G83T engine. This demonstrated Mitsubishi's commitment to staying competitive in the market.

In verdict, the 1991-1999 Mitsubishi Minicab 660 2-seater high roof earned its reputation as a practical, budget-friendly, and dependable commercial van. Its focus on efficiency, ease of use, and versatility made it a standout choice for businesses and individuals looking for a cost-effective and agile urban transport solution. While it may not have been the flashiest vehicle in its category, it excelled where it mattered most – delivering reliable and economical performance in various urban and suburban settings.

Frequently Asked Questions (FAQ) about the 1991-1999 Mitsubishi Minicab 660 2 Seater High Roof