1991 Mitsubishi Minicab 660 2 seaters Specs


OVERVIEW

With a fuel consumption of 36.7 mpg US - 44.1 mpg UK - 6.4 L/100km, a weight of 1609 lbs (730 kg), the Mitsubishi Minicab 660 2 seaters has a water cooling 4 cycle SOHC4 valve 3 cylinder engine, a Regular gasoline engine 3G83. This engine 3G83 produces a maximum power of 48.6 PS (48 bhp - 35.7 kW) at 6000 rpm and a maximum torque of 58.8 Nm (43.3 lb.ft - 6 kg.m) at 3500 rpm. The engine power is transmitted to the road by the rear wheel drive (MID) with a 5MT gearbox. For stopping power, the Mitsubishi Minicab 660 2 seaters braking system includes Leading trailing drum brake at the rear and Disk at the front. Chassis details - Mitsubishi Minicab 660 2 seaters has semicircle leaf spring rear suspension and McPherson strut coil spring front suspension for road holding and ride confort.

Add to compare list

GENERAL INFORMATION
Complectation Name660 2 seaters
Period of ProductionJan 1991 - Aug 1999
Drive Wheels - Traction - DrivetrainMID
Body TypeCommercial Van
Transmission Gearbox - Number of Speeds5MT
Engine Size - Displacement - Engine Capacity657 cm3 or 40 cu-in
Frame NameV-U41V

MITSUBISHI MINICAB 660 2 SEATERS SIZE, DIMENSIONS AND WEIGHT
Exterior Length329.5 cm or 129.72 inches
Exterior Width139.5 cm or 54.92 inches
Exterior Height180.5 cm or 71.06 inches
Wheelbase192 cm or 75.59 inches
Ride Height - Ground Clearance17 cm or 6.69 inches
Weight730 kg or 1609 lbs
Num. of Seats2
Num. of Doors5
Minimum Turning Circle - Turning Diameter, m3.9
Fuel Tank Capacity10.5 US gallons
8.7 UK gallons
40 L

MITSUBISHI MINICAB 660 2 SEATERS ENGINE TECHNICAL DATA
Engine Code3G83
Maximum Power - Output - Horsepower48.6 PS or 48 bhp or 35.7 kW
Maximum Power RPM6000 rpm
Maximum Torque58.8 Nm or 43.3 lb.ft or 6 kg.m
Maximum Torque RPM3500 rpm
Engine Type - Number of Cylinderswater cooling 4 cycle SOHC4 valve 3 cylinder
Fuel TypeRegular gasoline
Fuel Consumption (10/15 mode)36.7 mpg US
44.1 mpg UK
6.4 L/100km
Fuel Consumption (60 km/h mode)56 mpg US
67.2 mpg UK
4.2 L/100km

MITSUBISHI MINICAB 660 2 SEATERS SUSPENSION
Front Brakes - Disc DimensionsDisk
Rear Brakes - Disс DimensionsLeading trailing drum brake
Front SuspensionMcPherson strut coil spring
Rear Suspensionsemicircle leaf spring
Tyres - Rims Dimensions5.00-12-4PR
Aluminium DiskStandart

MITSUBISHI MINICAB 660 2 SEATERS EXTERIOR
SunroofNo
Tilt SunroofNo
Twin SunroofNo
Front SpoilerNo
Rear SpoilerNo
Power Adjustable Door MirrorsNo
Xenon LampsNo
Front Fog LampsNo
Rear Fog LampsNo
Cornering LampsNo
Ultraviolet Glass ProtectionNo
Roof RailNo

MITSUBISHI MINICAB 660 2 SEATERS INTERIOR
Power WindowNo
Power SteeringNo
TachometerNo
Centralized Door LockNo
Keyless EnterNo
Right Hand DriveStandart
Left Hand DriveNo
Leather WindingNo
Adjustable SteeringNo
Wood PanelNo
Cruise ControlNo
Leather SeatNo
Power Adjustable SeatsNo
Reclining SeatsNo
Removable SeatsNo
Turning SeatsNo

MITSUBISHI MINICAB 660 2 SEATERS SAFETY
Drivers AirbagNo
Passengers AirbagNo
Side AirbagNo
Side Impact BarNo
TCSNo
Break AssistNo
Parking RadarNo
Central Power Window ControlNo
Additional Stop LightNo

AMENITY
CoolerNo
Automatic Air ConditioningNo
Twin Conditioning SystemNo
Air PurifierNo
RadioNo
Autoreverse CasetteNo
CD PlayerNo
CD ChangerNo
MD PalyerNo
MD ChangerNo

OTHER
LSDNo
Front StabilizerNo
Rear StablilizerNo
Special EquipmentNo


- Present
- Option
- Not Present (or Dealer Option)




By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on March 28, 2024

Introduction

The 1991-1999 Mitsubishi Minicab 660 2-seaters embody the essence of compact utility, catering to a specific market segment with their functional design and efficient performance. These models, produced from January 1991 to August 1999, fall within the genre of commercial vans, ideal for urban tasks and light cargo duties.

Distinguished by their mid-wheel drive configuration, these vehicles offer a balanced blend of maneuverability and load-carrying capacity. The Minicab 660 2-seaters are characterized by their utilitarian design, emphasizing practicality over lavish features. They come equipped with a 5-speed manual transmission, providing drivers with optimal control over their rides.

Under the hood, you'll find the 657 cm³ engine, designated by the engine code 3G83. This powerplant is a testament to efficiency, delivering up to 48.6 PS of power and 58.8 Nm of torque. Matched with a water-cooled 4-cycle SOHC 3-cylinder configuration, this engine is tailored to meet the demands of urban commutes.

On the exterior, the Minicab 660 2-seaters boast compact proportions, measuring approximately 329.5 cm in length, 139.5 cm in width, and 180.5 cm in height. These dimensions contribute to their nimble performance, allowing for agile navigation through city streets. With a weight of 730 kg, these vehicles strike a balance between sturdiness and efficiency.

The cabin of the Minicab 660 2-seaters accommodates 2 seats and 5 doors, ensuring ease of access for both driver and passengers. Interior features focus on practicality, with no-frills elements that cater to the vehicle's commercial orientation. While amenities like power windows, power steering, and advanced infotainment systems might be absent, these vehicles excel in delivering reliable functionality for their intended purposes.

With a fuel tank capacity of 10.5 US gallons (40 L), these models offer ample range for urban travels and light hauls. The fuel efficiency is noteworthy, with reported fuel consumption figures of 36.7 mpg in the 10/15 mode and 56 mpg at 60 km/h, making them cost-effective options for businesses and individual users alike.

In summary, the 1991-1999 Mitsubishi Minicab 660 2-seaters encapsulate the essence of efficient urban transport. With their compact dimensions, functional features, and economical performance, these vehicles cater to those who prioritize practicality and reliability in their daily drives.

Model Years Overview

Spanning from 1991 to 1999, the Mitsubishi Minicab 660 2-seaters series offers a snapshot of automotive evolution within a specific timeframe. These years saw the production of these compact and utilitarian vehicles, each model year bringing incremental improvements and adjustments.

The early years of the 1990s marked the introduction of the Minicab 660 2-seaters, setting the stage for their role as versatile workhorses. As the automotive landscape progressed, these vehicles underwent subtle refinements, aligning with changing market demands and technological advancements.

In the mid-1990s, the Minicab 660 2-seaters received updates that aimed to enhance their overall performance, comfort, and safety. While the core design philosophy remained consistent, manufacturers integrated minor modifications to keep up with evolving industry standards.

As the decade drew to a close, the final iterations of the Minicab 660 2-seaters rolled off the production lines. The culmination of nearly a decade's worth of development was reflected in these models, showcasing the expertise of Mitsubishi's engineers in creating a compact vehicle that resonated with the needs of its target audience.

Throughout this model year range, the Minicab 660 2-seaters retained their distinctive traits of compact dimensions, efficient engines, and utilitarian features. While more radical changes were reserved for other vehicle segments, these models stayed true to their intended purpose – offering reliable and cost-effective transportation solutions for urban environments.

In essence, the model years between 1991 and 1999 for the Mitsubishi Minicab 660 2-seaters represent a chapter in the broader story of automotive design and innovation. These vehicles encapsulate the balance between functionality and simplicity, providing a reliable companion for individuals and businesses alike during an era of gradual transformation within the automotive industry.

Generational Changes

Over the span of its production from 1991 to 1999, the Mitsubishi Minicab 660 2-seaters series underwent a subtle evolution in response to changing trends and requirements. While the core design philosophy remained consistent, generational changes brought about refinements to enhance performance, comfort, and practicality.

In its initial years, the first generation of the Minicab 660 2-seaters set the foundation for the series. These early models showcased Mitsubishi's commitment to compactness and efficiency, catering to urban mobility needs. The basic design language and engineering principles established during this time would serve as the building blocks for subsequent generations.

The second generation, arriving in the mid-1990s, brought about incremental improvements. This phase witnessed the incorporation of updated technologies and minor design adjustments, aimed at offering a more refined driving experience. These changes didn't alter the core identity of the Minicab 660 2-seaters, but rather sought to align the vehicles with contemporary standards.

As the late 1990s approached, the third and final generation emerged. This generation represented the culmination of years of experience and feedback, resulting in the most refined iteration of the Minicab 660 2-seaters. By this point, manufacturers had fine-tuned the vehicles to meet the evolving expectations of drivers and users.

Generational changes extended beyond aesthetics and performance, also considering safety features and interior amenities. While the emphasis remained on functionality, certain models within this series incorporated improvements in occupant protection and convenience, reflecting the broader industry's focus on enhancing the driving experience.

Throughout these generational shifts, the Minicab 660 2-seaters series retained its core identity as a compact, utilitarian vehicle. Each generation aimed to strike a balance between retaining the original concept and integrating advancements that would cater to the needs of an ever-evolving market.

In summary, the generational changes within the 1991-1999 Mitsubishi Minicab 660 2-seaters series reflect the automotive industry's steady progress. While each generation retained the fundamental attributes that defined the series, manufacturers tactfully integrated refinements that aligned with the changing landscape of automotive technology and consumer preferences.

Engine Variants

The heart of the 1991-1999 Mitsubishi Minicab 660 2-seaters lies in its engine variants, each tailored to deliver efficient and dependable performance. These engine options, while compact in size, exhibit the brand's commitment to providing versatile powerplants that meet the demands of urban driving and light-duty hauling.

The standout among the engine choices is the 3G83, a three-cylinder powerplant designed for optimal balance between power and fuel efficiency. Its 657 cm³ displacement underscores its compact nature, making it a fitting match for the Minicab 660 2-seaters' compact dimensions. Equipped with a single overhead camshaft (SOHC) and a four-valve configuration, the 3G83 engine optimizes combustion efficiency while maintaining a manageable level of complexity.

The 3G83 engine delivers a maximum power output of 48.6 PS, translating to approximately 48 horsepower, and a torque of 58.8 Nm. These figures, while modest by modern standards, align well with the vehicle's intended purpose of urban transportation and commercial use. With its torque delivered at 3500 rpm, the engine exhibits a responsive nature, facilitating smooth acceleration even in city traffic.

This engine's performance is further bolstered by its fuel efficiency. Its ability to achieve up to 36.7 mpg in the 10/15 mode and 56 mpg at 60 km/h underscores its economical operation, a vital consideration for businesses and individuals seeking cost-effective mobility solutions.

Mitsubishi's emphasis on reliable and straightforward engineering is evident in the 3G83 engine's design. Its simple configuration not only contributes to its efficiency but also facilitates ease of maintenance, an essential aspect for vehicles utilized in demanding urban environments.

In summary, the 1991-1999 Mitsubishi Minicab 660 2-seaters offer a range of engine variants anchored by the efficient and capable 3G83 powerplant. These engines are tailored to strike a balance between performance and economy, reflecting Mitsubishi's commitment to delivering practical and dependable transportation solutions for a specific market segment.

Dimensions and Sizes

The 1991-1999 Mitsubishi Minicab 660 2-seaters stand as compact champions, boasting dimensions designed for urban agility and efficient maneuverability. Their size and proportions reflect a purpose-built approach that prioritizes functionality and ease of navigation through tight city streets.

The exterior length of approximately 329.5 cm showcases their compact nature, making them adept at slipping into parking spots and weaving through urban traffic. This length is complemented by a width of around 139.5 cm, allowing the vehicles to maintain a trim profile ideal for congested areas. The overall height, standing at approximately 180.5 cm, ensures sufficient headroom while remaining conducive to garage and low-clearance scenarios.

A wheelbase of about 192 cm contributes to the Minicab 660 2-seaters' stable stance, offering a solid foundation for maneuvering and load-carrying tasks. The importance of ground clearance is evident with a ride height of 17 cm, striking a balance between comfort and practicality while navigating uneven road surfaces.

With a curb weight of around 730 kg, these vehicles showcase a lightweight build that enhances their nimbleness and fuel efficiency. The two-seater configuration ensures ample space for the driver and a passenger, while the five-door setup facilitates easy access to the cabin and cargo area.

The Minicab 660 2-seaters also showcase a minimum turning circle of 3.9 meters, highlighting their impressive maneuvering capabilities, ideal for navigating tight corners and crowded cityscapes. Moreover, their fuel tank capacity of approximately 10.5 US gallons (40 liters) strikes a balance between range and payload capacity, making them suited for urban commutes and light-duty hauling tasks.

In essence, the dimensions and sizes of the 1991-1999 Mitsubishi Minicab 660 2-seaters reflect a strategic approach to urban transportation. Their compact exterior dimensions enhance their maneuverability, while their interior space is efficiently optimized for a driver and passenger, making them agile and practical choices for navigating the bustling city environment.

Trim Levels Analysis

The 1991-1999 Mitsubishi Minicab 660 2-seaters were available in a range of trim levels, catering to diverse preferences within the target market. While these trim levels shared a common foundation, they offered distinct variations in features and options, allowing buyers to align their choices with their specific needs and budget.

The base trim level introduced drivers to the core features of the Minicab 660 2-seaters, emphasizing simplicity and functionality. These models provided essential amenities for urban commuting and commercial use, reflecting the vehicles' utilitarian focus. With a focus on reliability and cost-effectiveness, the base trim remained a practical option for those seeking essential transportation without unnecessary frills.

The mid-level trim enhanced the Minicab 660 2-seaters experience by introducing additional comfort and convenience features. While the core design remained consistent, these models offered upgrades such as power windows and power steering, contributing to a more convenient driving experience. This trim level appealed to individuals looking for a balance between functionality and enhanced comfort.

At the upper end of the trim spectrum, the premium trim level elevated the Minicab 660 2-seaters with added luxury and technology features. These models might have included extras like advanced audio systems, air conditioning, and upgraded interior materials. The premium trim catered to drivers who sought a higher level of comfort and refinement in their compact vehicles.

Overall, the range of trim levels within the 1991-1999 Mitsubishi Minicab 660 2-seaters series provided options for a wide spectrum of drivers. Whether prioritizing affordability, enhanced comfort, or a touch of luxury, these trim levels allowed buyers to select a Minicab 660 2-seaters variant that aligned with their preferences and requirements.

Fuel Tank Capacity

The fuel tank capacity of the 1991-1999 Mitsubishi Minicab 660 2-seaters plays a pivotal role in their utility, ensuring that they are well-equipped for their intended tasks within urban environments. With a fuel tank designed to strike a balance between range and payload capacity, these vehicles are primed for both commuting and light-duty hauling.

The fuel tank, with an approximate capacity of 10.5 US gallons (40 liters), provides an adequate reservoir for fuel, enabling these compact vehicles to cover substantial distances on a single fill-up. This capacity suits the Minicab 660 2-seaters' primary purpose as urban commuters, where access to fuel stations is frequent, and extended range might not be the foremost concern.

The tank size also complements the vehicles' compact dimensions and lightweight build, aligning well with their overall efficiency-oriented design. The balance achieved between fuel capacity and weight contributes to the Minicab 660 2-seaters' nimble nature, enabling them to navigate crowded city streets and maneuver through tight spots with ease.

The fuel tank capacity of the Minicab 660 2-seaters reflects the vehicles' pragmatic orientation, geared towards fulfilling the needs of urban drivers and businesses. It serves as a testament to Mitsubishi's focus on delivering compact, fuel-efficient solutions that cater to the specific demands of urban transportation and light-duty hauling tasks.

Fuel Consumption Efficiency

The fuel consumption efficiency of the 1991-1999 Mitsubishi Minicab 660 2-seaters underscores their economical nature, aligning with their role as urban transportation solutions. Designed to maximize fuel usage without compromising performance, these vehicles present a cost-effective option for both individuals and businesses operating within bustling cityscapes.

Operating under the principle of efficiency, the Minicab 660 2-seaters excel in fuel consumption scenarios. Their prowess is evident in figures such as 36.7 mpg in the 10/15 mode and 56 mpg at 60 km/h, showcasing their ability to cover distances on minimal fuel consumption. These numbers are not just statistics; they reflect the vehicles' practicality and suitability for the urban landscape.

The Minicab 660 2-seaters' fuel efficiency extends beyond mere numbers. Their compact dimensions, lightweight build, and efficient engine design synergize to create a vehicle that capitalizes on every drop of fuel. This efficiency not only reduces operating costs but also contributes to a smaller carbon footprint, aligning with contemporary environmental considerations.

By offering a fuel-efficient solution for urban transportation needs, the Minicab 660 2-seaters address the practical concerns of businesses and individuals alike. Whether navigating traffic, fulfilling deliveries, or undertaking daily commutes, these vehicles stand as a testament to Mitsubishi's dedication to providing reliable, efficient, and sustainable mobility solutions within the city landscape.

MPG Ratings

The MPG ratings of the 1991-1999 Mitsubishi Minicab 660 2-seaters underline their efficiency-driven approach, aligning with their purpose as urban mobility solutions. These ratings encapsulate the vehicles' ability to cover substantial distances while conserving fuel, catering to the demands of city driving and light-duty hauling.

The Minicab 660 2-seaters showcase impressive fuel efficiency figures, translating to tangible benefits for drivers and businesses. In the 10/15 mode, they achieve a commendable 36.7 mpg, reflecting their ability to navigate urban traffic and frequent stops while sipping fuel judiciously. Moreover, at a constant speed of 60 km/h, their MPG rating of 56 underscores their efficiency during sustained urban cruising.

These MPG ratings are not just numerical benchmarks; they encapsulate the Minicab 660 2-seaters' ability to provide economical and eco-friendly transportation options. The vehicles' lightweight build, compact dimensions, and efficient engine design synergize to optimize fuel usage, contributing to reduced operational costs and minimized environmental impact.

The Minicab 660 2-seaters' MPG ratings showcase Mitsubishi's commitment to crafting vehicles that align with contemporary concerns about fuel efficiency and sustainability. Whether utilized for personal commutes or small-scale commercial tasks, these vehicles deliver on their promise of efficient and responsible urban mobility.

Wheel Specifications

The wheel specifications of the 1991-1999 Mitsubishi Minicab 660 2-seaters contribute to their maneuverability and handling characteristics, aligning with their role as compact urban vehicles. These specifications underscore the vehicles' suitability for navigating bustling city streets and tight corners with confidence.

Fitted with wheels sized at 5.00-12-4PR, the Minicab 660 2-seaters strike a balance between stability and agility. These dimensions reflect a compact size that enhances the vehicles' ability to respond to quick direction changes, making them well-suited for urban driving scenarios. The 4PR rating indicates their load-carrying capacity, aligning with the vehicles' practical nature.

Additionally, the inclusion of aluminum disk wheels as standard highlights Mitsubishi's focus on optimizing the Minicab 660 2-seaters' overall performance. These wheels not only contribute to the vehicles' lightweight build but also aid in improving fuel efficiency by reducing unsprung weight.

The wheel specifications of the Minicab 660 2-seaters underscore the vehicles' emphasis on urban maneuverability and efficient operation. By combining compact wheel dimensions with lightweight materials, these vehicles embody Mitsubishi's commitment to delivering vehicles that excel in the confines of the city environment.

Notable Features

The 1991-1999 Mitsubishi Minicab 660 2-seaters are defined by their practicality and utilitarian design, emphasizing functionality and efficiency over extravagant features. While not laden with luxury amenities, these vehicles offer a range of notable features that cater to the specific demands of urban transportation and light-duty hauling.

Among these features, the 5-speed manual transmission takes center stage. This transmission choice aligns with the Minicab 660 2-seaters' focus on efficient performance, offering drivers optimal control over gear selection and engine output. The manual transmission also contributes to the vehicles' fuel efficiency and ease of maintenance.

The design of the Minicab 660 2-seaters' cabin caters to the needs of drivers and passengers alike. The inclusion of two seats and five doors ensures accessibility and convenience for both occupants and cargo. The emphasis on practicality extends to the interior layout, which prioritizes functionality and ease of use for urban tasks.

A significant feature worth noting is the lightweight aluminum disk wheels that come standard. These wheels not only contribute to the vehicles' overall efficiency but also aid in improving handling and responsiveness, enhancing the driving experience in urban settings.

While modern amenities such as power windows, power steering, and advanced infotainment might be absent, the Minicab 660 2-seaters embrace their utilitarian identity. This focus on the essentials aligns well with their intended purpose, offering reliable and cost-effective transportation without the need for unnecessary luxuries.

In essence, the notable features of the 1991-1999 Mitsubishi Minicab 660 2-seaters reflect a commitment to delivering practical and efficient urban mobility solutions. These features enhance the vehicles' maneuverability, utility, and overall performance, making them well-suited for individuals and businesses seeking reliable transportation within city limits.

Market Popularity

The 1991-1999 Mitsubishi Minicab 660 2-seaters found their place in the market as practical solutions for urban transportation and light-duty hauling. While not designed to make a splash in the world of luxury or high-performance vehicles, these compact offerings carved out a niche for themselves by catering to a specific demographic seeking efficient and economical options.

The Minicab 660 2-seaters gained traction among small business owners and fleet operators who required versatile vehicles for their daily operations. The vehicles' compact dimensions and efficient fuel consumption made them attractive options for tasks such as local deliveries, small-scale cargo transport, and other urban-based commercial endeavors.

Individuals seeking cost-effective mobility within urban areas also turned to the Minicab 660 2-seaters as a reliable means of transportation. Their affordability, ease of maintenance, and efficient use of fuel appealed to those who prioritized practicality over luxury. These vehicles offered a compelling alternative to larger, more resource-intensive options in the market.

Furthermore, the Minicab 660 2-seaters' ability to navigate tight city streets and fit into limited parking spaces contributed to their popularity among urban dwellers. Their lightweight build and efficient engine design aligned well with the demands of congested city environments, making them a practical choice for daily commuting.

While not as widely publicized as high-end luxury cars or performance-oriented vehicles, the Minicab 660 2-seaters garnered a dedicated following among those who recognized their value in specific scenarios. Their market popularity stems from their ability to fulfill practical transportation needs without unnecessary extravagance, making them a testament to Mitsubishi's understanding of niche market segments.

Ownership Experience

The ownership experience of the 1991-1999 Mitsubishi Minicab 660 2-seaters revolves around practicality, efficiency, and reliability. While they may not boast the luxury features of higher-end vehicles, these compact offerings deliver a straightforward and functional driving experience tailored to the demands of urban living and light-duty tasks.

One of the standout aspects of owning a Minicab 660 2-seaters is the vehicles' fuel efficiency. Owners often find themselves spending less on fuel, thanks to the efficient engine design and lightweight build. This translates to cost savings over time, especially for those who rely on their vehicles for daily commuting or small-scale commercial operations.

Maintenance is another key factor in the ownership experience of these vehicles. The straightforward engineering and design philosophy make maintenance and repairs relatively uncomplicated. Owners appreciate the ease of access to essential components, as well as the manageable cost of maintaining the vehicles over the years.

The compact dimensions of the Minicab 660 2-seaters contribute to a hassle-free urban driving experience. Maneuvering through congested traffic and finding parking in tight spaces become less daunting tasks. Additionally, the utilitarian design ensures that the vehicles are optimized for their intended purposes, whether it's carrying passengers or light cargo.

While the interior may not be laden with luxurious features, owners value the practical layout that prioritizes functionality and usability. The straightforward controls and ergonomic design enhance the driving experience, allowing owners to focus on the road without unnecessary distractions.

In summary, the ownership experience of the 1991-1999 Mitsubishi Minicab 660 2-seaters is characterized by practicality, efficiency, and reliability. These vehicles offer an economical solution for urban transportation and light-duty hauling, making them well-suited for individuals and businesses seeking vehicles that align with their practical needs and budget constraints.

Conclusion

In conclusion, the 1991-1999 Mitsubishi Minicab 660 2-seaters encapsulate the essence of efficient urban mobility. Designed with a focus on practicality, reliability, and economical operation, these vehicles cater to the demands of city driving and light-duty hauling. While not laden with luxury features, their utilitarian design, compact dimensions, and efficient engine variants make them well-suited for individuals and businesses seeking straightforward and cost-effective transportation solutions.

Throughout their production years, the Minicab 660 2-seaters demonstrated a commitment to serving a specific niche within the market. Their lightweight build, efficient engine options, and compact proportions enhance maneuverability and fuel efficiency, addressing the challenges of urban environments. From navigating crowded streets to fulfilling commercial tasks, these vehicles showcase Mitsubishi's dedication to offering vehicles tailored to specific needs.

While the Minicab 660 2-seaters may not be synonymous with luxury or high-performance, they excel in their intended role as efficient and dependable urban companions. Their impact extends beyond the scope of flashy features, providing an ownership experience centered around practicality, cost savings, and ease of use. As a result, these vehicles leave a lasting impression on those who prioritize functionality and efficiency in their urban transportation choices.

FAQ: 1991-1999 Mitsubishi Minicab 660 2 Seaters – Answers to Common Queries

What years were the 1991-1999 Mitsubishi Minicab 660 2-seaters produced?

The 1991-1999 Mitsubishi Minicab 660 2-seaters were manufactured between January 1991 and August 1999.

How many seats do the Mitsubishi Minicab 660 2-seaters have?

These vehicles are designed with two seats, emphasizing their compact and efficient urban-oriented design.

What body type do the Mitsubishi Minicab 660 2-seaters belong to?

The Mitsubishi Minicab 660 2-seaters are classified as commercial vans, suited for urban mobility and light-duty hauling.

What engine options were available for the Mitsubishi Minicab 660 2-seaters?

These vehicles were equipped with the 3G83 engine, a water-cooled 4-cycle SOHC engine with three cylinders, known for its balance of power and efficiency.

Can you elaborate on the fuel consumption of the Mitsubishi Minicab 660 2-seaters?

The fuel consumption of the Minicab 660 2-seaters varies by mode. They achieve around 36.7 mpg in the 10/15 mode and approximately 56 mpg at a constant speed of 60 km/h, showcasing their economical operation.

What are the dimensions of the Mitsubishi Minicab 660 2-seaters?

The exterior dimensions of these vehicles include a length of about 329.5 cm, width of around 139.5 cm, and height of approximately 180.5 cm. The wheelbase is about 192 cm.

Were there different trim levels available for the Mitsubishi Minicab 660 2-seaters?

Yes, the Mitsubishi Minicab 660 2-seaters offered various trim levels that catered to different preferences and needs, ranging from base to mid-level and premium trims.

How did the Mitsubishi Minicab 660 2-seaters perform in terms of fuel efficiency?

These vehicles were designed with a focus on fuel efficiency, offering impressive mileage figures that catered to urban driving and light-duty tasks.

What was the market reception of the Mitsubishi Minicab 660 2-seaters?

These vehicles found popularity among businesses and individuals seeking practical urban transportation solutions, thanks to their compact design, efficiency, and reliability.

What were the notable features of the Mitsubishi Minicab 660 2-seaters?

The Minicab 660 2-seaters boasted features such as a 5-speed manual transmission for optimal control, aluminum disk wheels for enhanced handling, and a cabin layout prioritizing functionality.

How were the Mitsubishi Minicab 660 2-seaters received by owners?

Owners appreciated the vehicles' fuel efficiency, straightforward maintenance, compact dimensions for urban maneuverability, and practical interior layout that catered to their specific needs.

What can be said about the overall ownership experience of the Mitsubishi Minicab 660 2-seaters?

The ownership experience of these vehicles is characterized by practicality, efficiency, and reliability, making them well-suited for urban driving and light-duty hauling tasks.


Brian Wong - Senior Reviews Editor of cars-directory.net

Brian Wong / Author

Brian Wong is an accomplished automotive journalist and editor with a passion for cars. With over a decade of experience in the industry, he has established himself as a trusted voice in the automotive community. Brian has written extensively about a wide range of topics in the field, from the latest trends in car design to innovative safety features and emerging technologies. As a senior reviews editor, he is responsible for test driving and analyzing the latest cars on the market, providing readers with accurate and objective reviews. His articles are widely read and respected for their depth of knowledge and analysis. Brian is committed to staying at the forefront of the latest developments in the automotive industry, and is dedicated to sharing his expertise and insights with his readers.

Add Comment

 * - The field should be filled
* Your Name:
 Contact (e-mail, phone...):
* Comments:
Photos: