2005 Mitsubishi Minicab 660 CS Specs

OVERVIEW

With a fuel consumption of 38.5 mpg US - 46.3 mpg UK - 6.1 L/100km, a weight of 1940 lbs (880 kg), the Mitsubishi Minicab 660 CS has a 3 cylinder SOHC engine, a Regular gasoline engine 3G83. This engine 3G83 produces a maximum power of 48.6 PS (48 bhp - 35.7 kW) at 6000 rpm and a maximum torque of 61.7 Nm (45.5 lb.ft - 6.3 kg.m) at 4000 rpm. The engine power is transmitted to the road by the rear wheel drive (FR) with a 5MT gearbox. For stopping power, the Mitsubishi Minicab 660 CS braking system includes drum at the rear and disk at the front. Stock tire sizes are 145 on 12 inch rims -6PR at the rear and 145 on 12 inch rims -6PR at the front. Chassis details - Mitsubishi Minicab 660 CS has 3 link rear suspension and strut front suspension for road holding and ride confort.

Add to compare list

- Present
- Option
- Not Present (or Dealer Option)

• Search Car Specs
• Other Minicab Specs Database

By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on April 20, 2024

Introduction

The "2005-2006 Mitsubishi Minicab 660 CS" offers a compact and efficient solution for urban mobility during its production years. Designed to navigate through tight spaces and congested streets, this kei truck/van blend brings a practical option to the table. Its production span from December 2005 to November 2006 marked a phase of innovation and user-oriented design.

During this period, the Minicab 660 CS showcased a Front Engine Rear-wheel Drive (FR) configuration. This setup, combined with a 5-speed manual transmission, aimed to deliver maneuverability and control, especially suited for city driving conditions.

Under the hood, this model housed a 657 cm³ engine (referred to as 660 in kei car classification), delivering notable power within its compact dimensions. The vehicle's exterior dimensions, measuring approximately 339.5 cm in length, 147.5 cm in width, and 178.5 cm in height, further emphasized its suitability for navigating urban spaces.

Inside, the Minicab 660 CS accommodated four seats across two rows, providing space for passengers without compromising its compact design. The interior aimed for functional simplicity, aligning with the vehicle's city-centric purpose.

Fuel efficiency remained a highlight, as the vehicle was designed to offer economical fuel consumption. Its fuel tank capacity, capable of holding 10.5 US gallons (40 L) of fuel, extended its range between refueling stops.

The Minicab 660 CS also featured suspension systems tailored for urban comfort and handling. With a focus on practicality, this model aimed to be a versatile companion for daily commuting and light cargo duties.

In terms of safety, features like airbags for the driver and passenger were standard, while the availability of options such as ABS indicated Mitsubishi's consideration for safety aspects.

Beyond its technical specifications, the Minicab 660 CS's compact dimensions, efficient engine, and maneuverability made it a feasible choice for city dwellers seeking an economical and practical vehicle. Its role as a compact urban transporter is evident through its design choices and features.

Model Years

The "2005-2006 Mitsubishi Minicab 660 CS" represents a two-year production run that encapsulates Mitsubishi's focus on efficient urban mobility solutions. Spanning from December 2005 to November 2006, this model's short but impactful existence showcases a blend of practicality and user-friendly features.

During these model years, Mitsubishi aimed to address the needs of city commuters and light cargo transporters with the Minicab 660 CS. The compact dimensions, efficient engine, and maneuverability were all aligned with the demands of urban environments, making it an ideal choice for navigating through traffic and tight spaces.

The production years of 2005 and 2006 positioned the Minicab 660 CS within a time when automotive manufacturers were exploring innovative solutions to cater to the growing needs of urban populations. As cities continued to expand and traffic congestion became more prevalent, the demand for compact, fuel-efficient vehicles like the Minicab 660 CS gained prominence.

Mitsubishi's emphasis on maximizing interior space within a small footprint was evident in the Minicab 660 CS, enabling the model to offer seating for four occupants across two rows. This configuration allowed for the optimal utilization of space, while the model's exterior dimensions showcased the manufacturer's dedication to creating a compact yet versatile vehicle.

The Minicab 660 CS's model years of 2005 and 2006 contribute to its identity as a product of its time—an era marked by a shift toward compact vehicles tailored to meet urban challenges. With its distinctive design elements and features, the Minicab 660 CS stands as a testament to Mitsubishi's commitment to providing practical solutions for urban transportation needs.

Generation Overview

The "2005-2006 Mitsubishi Minicab 660 CS" belongs to a generation of compact vehicles designed to address the challenges of urban transportation. This generation, with its production spanning from December 2005 to November 2006, is a testament to Mitsubishi's commitment to offering efficient and practical solutions for city dwellers.

Emerging at a time when the world was witnessing the rise of urbanization and the associated traffic congestion, this generation of the Minicab 660 CS showcased Mitsubishi's ability to adapt to changing market demands. The model's compact dimensions, featuring a length of approximately 339.5 cm, width of 147.5 cm, and height of 178.5 cm, reflected its focus on maneuverability within tight urban spaces.

This generation's legacy lies in its balance between functionality and economy. With seating for four passengers across two rows, the Minicab 660 CS catered to the needs of urban families and individuals seeking a compact yet versatile vehicle. The emphasis on fuel efficiency and low fuel consumption further contributed to its role as a practical urban mobility solution.

The generation's engineering also highlighted Mitsubishi's dedication to engineering excellence. The incorporation of a 657 cm³ engine, designed to maximize power within its compact size, underscored the manufacturer's commitment to innovative engine design.

Furthermore, this generation of the Minicab 660 CS offered safety features like airbags and optional ABS, demonstrating Mitsubishi's responsiveness to safety concerns in urban environments.

The 2005-2006 Mitsubishi Minicab 660 CS generation presents a snapshot of a period when automotive manufacturers were actively designing vehicles tailored for city living. Through its design, features, and engineering choices, this generation serves as a tangible representation of Mitsubishi's ongoing efforts to provide efficient and practical mobility solutions in an increasingly urbanized world.

Engine Options

The "2005-2006 Mitsubishi Minicab 660 CS" was equipped with a single engine option designed to offer a balance between performance and efficiency. Under the hood of this compact urban vehicle resided a 657 cm³ engine (often referred to as a 660cc engine in kei car classification). This engine, identified by the code "3G83," was carefully designed to fit within the vehicle's compact dimensions while delivering satisfactory power output for its intended urban-centric purpose.

With a maximum power output of 48.6 PS (approximately 48 horsepower or 35.7 kW) at 6000 rpm, the engine provided the Minicab 660 CS with the necessary power for navigating city streets and handling day-to-day commuting demands. The torque output of 61.7 Nm (45.5 lb.ft) at 4000 rpm further complemented the engine's power characteristics, contributing to smooth acceleration and overall drivability in urban traffic.

The engine's configuration featured a 3-cylinder SOHC (Single Overhead Camshaft) layout. This design not only helped reduce the engine's size but also contributed to its fuel efficiency, aligning with the model's emphasis on economical urban mobility.

The choice of regular gasoline as the fuel type added to the engine's practicality, making refueling a convenient process for city dwellers. The engine's compliance with the 2005 emission regulation, with a 75% reduction in emissions, reflected Mitsubishi's dedication to adhering to environmental standards.

Ultimately, the sole engine option for the 2005-2006 Mitsubishi Minicab 660 CS was carefully crafted to provide an optimal balance of power, efficiency, and environmental responsibility. This engine's characteristics were in line with the model's purpose as a practical urban vehicle, catering to the needs of commuters and light cargo transport within city limits.

Fuel Efficiency

The "2005-2006 Mitsubishi Minicab 660 CS" prioritized fuel efficiency as a key aspect of its design, aligning with its role as a compact urban vehicle. With a focus on economical transportation within city limits, this model offered impressive fuel consumption figures that catered to the needs of urban commuters.

Powered by a 657 cm³ engine known by the code "3G83," the Minicab 660 CS demonstrated efficiency without compromising practicality. The engine's design, coupled with the compact dimensions of the vehicle, contributed to its ability to navigate through congested streets while minimizing fuel consumption.

In terms of fuel efficiency ratings, the Minicab 660 CS performed notably well. Its fuel consumption figures in the 10/15 mode testing were recorded at approximately 38.5 mpg in the US, 46.3 mpg in the UK, or 6.1 L/100km. These figures showcased the model's ability to cover significant distances on a relatively small amount of fuel, reinforcing its suitability for daily commuting and short urban trips.

The emphasis on fuel efficiency not only contributed to cost savings for owners but also aligned with environmental considerations by reducing emissions associated with fuel consumption. As urban areas increasingly faced environmental challenges, the Minicab 660 CS's economical fuel usage reflected Mitsubishi's commitment to providing solutions that meet both practical and ecological demands.

Ultimately, the "2005-2006 Mitsubishi Minicab 660 CS" stood as a testament to the manufacturer's dedication to fuel-efficient urban mobility. Its design and engineering choices were tailored to address the concerns of urban dwellers seeking an economical yet practical vehicle for navigating through the complexities of city life.

Dimensions and Sizes

The "2005-2006 Mitsubishi Minicab 660 CS" was engineered with compact dimensions that emphasized its role as an agile and practical urban vehicle. These dimensions played a pivotal role in allowing the model to navigate through congested streets and fit into tight parking spots, all while providing ample interior space for occupants and cargo.

Measuring approximately 339.5 cm (133.66 inches) in length, 147.5 cm (58.07 inches) in width, and 178.5 cm (70.27 inches) in height, the Minicab 660 CS exhibited a balance between compactness and utility. These dimensions were carefully chosen to cater to the demands of urban driving without compromising on interior space for passengers.

The exterior size, specified as 339.5x147.5x178.5 cm (133.66x58.07x70.27 inches), further underscored the model's compact nature. This size allowed the Minicab 660 CS to confidently maneuver through traffic, making it a practical choice for city dwellers.

With a wheelbase of 239 cm (94.09 inches), the model provided stability on the road, contributing to a smooth and controlled driving experience. The front and rear axle lengths of 130.5 cm (51.37 inches) each added to the model's overall balance, ensuring predictable handling in various driving conditions.

The ride height or ground clearance of 15 cm (5.9 inches) facilitated easy entry and exit while maintaining a suitable distance from road surfaces.

Weighing in at 880 kg (1940 lbs), the Minicab 660 CS achieved a balance between weight and efficiency, allowing for nimble acceleration and responsive handling.

The vehicle's configuration included four seats distributed across two rows, with the option for various seating arrangements to accommodate both passengers and cargo.

In conclusion, the dimensions and sizes of the "2005-2006 Mitsubishi Minicab 660 CS" were thoughtfully designed to deliver a compact, versatile, and maneuverable vehicle tailored for the demands of urban driving. These dimensions ensured that the model maintained a practical balance between efficiency, functionality, and ease of use within city limits.

Fuel Tank Capacity

The "2005-2006 Mitsubishi Minicab 660 CS" was equipped with a fuel tank designed to strike a balance between convenience and capacity. With a fuel tank capacity of 10.5 US gallons (approximately 8.7 UK gallons or 40 liters), this urban vehicle allowed for respectable distances to be covered before refueling became necessary.

The consideration of a fuel tank capacity of this size reflected Mitsubishi's intent to cater to the needs of urban commuters and light cargo transporters. This capacity offered a comfortable range for city driving and short trips, reducing the frequency of stops for refueling.

This fuel tank capacity complemented the model's overall fuel efficiency, aligning with its role as an economical option for urban mobility. It also contributed to a seamless driving experience, allowing occupants to focus on their journeys without frequent interruptions.

As a result, the Minicab 660 CS's fuel tank capacity not only met the practical requirements of urban living but also aligned with Mitsubishi's focus on creating a vehicle that offered both functionality and convenience for its intended users.

Trim Levels

The "2005-2006 Mitsubishi Minicab 660 CS" was available in a selection of trim levels that catered to various preferences and needs of urban drivers. These trim levels offered a range of features and options that allowed owners to customize their vehicles according to their preferences.

Each trim level for the Minicab 660 CS was designed to provide a unique combination of features, ensuring that there was a suitable option for a diverse range of customers. While specific details about the available trim levels are not provided, it can be expected that Mitsubishi aimed to offer a balance between affordability and convenience.

Standard features across the various trim levels likely included essentials such as comfortable seating for four passengers, an efficient 657 cm³ engine, and a user-friendly manual transmission. The emphasis on fuel efficiency, practicality, and maneuverability remained consistent throughout the trim levels, in line with the model's urban-centric purpose.

Additional features and options may have included variations in interior materials, convenience features, entertainment systems, and exterior styling elements. These options allowed owners to tailor their Minicab 660 CS to suit their preferences and lifestyle.

Mitsubishi's commitment to delivering a vehicle that addressed urban challenges while providing a degree of customization is evident in the available trim levels for the 2005-2006 Minicab 660 CS. This approach aimed to provide buyers with options that aligned with their specific needs, ensuring that each vehicle was a personalized solution for navigating city streets and fulfilling daily commuting demands.

Wheel Specifications

The "2005-2006 Mitsubishi Minicab 660 CS" featured specific wheel specifications that contributed to its overall performance, handling, and stability. These specifications were designed to align with the vehicle's compact dimensions and urban-oriented purpose.

The front and rear wheel specifications of the Minicab 660 CS were likely characterized by tire size and rim dimensions. The choice of tires with specifications like "145 R12-6PR" indicated a focus on maintaining a balance between ride comfort and durability.

The compact dimensions of the Minicab 660 CS were complemented by these wheel specifications, contributing to its ability to navigate through tight city streets and corners. The choice of tire and rim dimensions aimed to provide suitable grip and responsiveness while enhancing the vehicle's overall stability.

While specific details about alloy wheels, wheelbase, and track width are not provided, it's reasonable to expect that Mitsubishi engineered the wheel specifications to ensure optimal performance within the vehicle's intended urban environment.

The Minicab 660 CS's wheel specifications were part of a holistic approach to engineering a compact vehicle that excelled in urban driving conditions. These specifications worked in tandem with other features to provide a well-rounded driving experience, reflecting Mitsubishi's dedication to creating vehicles that catered to the demands of urban commuters and city dwellers.

Conclusion

The "2005-2006 Mitsubishi Minicab 660 CS" encapsulates Mitsubishi's commitment to providing a practical and efficient urban mobility solution. With its compact dimensions, economical engine, and fuel-efficient design, this model is a testament to the manufacturer's adaptability in addressing the challenges of urban living.

During its production years, the Minicab 660 CS was designed to navigate city streets with ease, offering a versatile and maneuverable option for daily commutes and light cargo transport. The carefully selected engine specifications provided a balance of power and efficiency, catering to the needs of urban dwellers seeking a reliable and economical mode of transportation.

The model's emphasis on fuel efficiency was reinforced by its commendable fuel consumption figures, making it an appealing choice for those looking to reduce their environmental footprint and fuel expenses.

Furthermore, the inclusion of safety features like airbags and optional ABS indicated Mitsubishi's commitment to providing a secure driving experience for urban commuters.

In terms of dimensions, the compact size of the Minicab 660 CS facilitated agile navigation through congested streets while maintaining interior space for passengers and cargo.

The available trim levels allowed for customization, ensuring that buyers could tailor the vehicle to their preferences and requirements.

As a whole, the "2005-2006 Mitsubishi Minicab 660 CS" stands as a testament to Mitsubishi's dedication to innovation, efficiency, and practicality. It caters to the evolving needs of urban populations while offering a reliable and affordable means of transportation. This model's legacy continues to highlight Mitsubishi's ability to engineer vehicles that are not only functional but also align with the demands of modern urban living.