2005 Mitsubishi Minicab 660 CS 4WD Specs

OVERVIEW

With a fuel consumption of 38.5 mpg US - 46.3 mpg UK - 6.1 L/100km, a weight of 2072 lbs (940 kg), the Mitsubishi Minicab 660 CS 4WD has a 3 cylinder SOHC engine, a Regular gasoline engine 3G83. This engine 3G83 produces a maximum power of 48.6 PS (48 bhp - 35.7 kW) at 6000 rpm and a maximum torque of 61.7 Nm (45.5 lb.ft - 6.3 kg.m) at 4000 rpm. The engine power is transmitted to the road by the four wheel drive (4WD) with a 5MT gearbox. For stopping power, the Mitsubishi Minicab 660 CS 4WD braking system includes drum at the rear and disk at the front. Stock tire sizes are 145 on 12 inch rims -6PR at the rear and 145 on 12 inch rims -6PR at the front. Chassis details - Mitsubishi Minicab 660 CS 4WD has 3 link rear suspension and strut front suspension for road holding and ride confort.

Add to compare list

- Present
- Option
- Not Present (or Dealer Option)

• Search Car Specs
• Other Minicab Specs Database

By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on April 23, 2024

Introduction to the 2005-2006 Mitsubishi Minicab 660 CS 4WD

The 2005-2006 Mitsubishi Minicab 660 CS 4WD was a compact and versatile vehicle produced during the period of December 2005 to November 2006. This model offered a 4WD drivetrain configuration, providing enhanced traction and stability, particularly useful in various driving conditions.

One of the noteworthy features of this vehicle was its 5-speed manual transmission gearbox, which allowed for precise control over gear shifts and contributed to its overall efficiency.

Under the hood, the Minicab 660 CS 4WD was equipped with a 657 cm³ engine, delivering 48.6 PS (48 bhp) of power at 6000 rpm and a maximum torque of 61.7 Nm (45.5 lb.ft) at 4000 rpm. This 3-cylinder SOHC engine ran on regular gasoline and complied with the 2005 emission regulation with a 75% reduction in emissions, making it a more environmentally friendly option.

In terms of size and dimensions, the exterior of the vehicle measured approximately 339.5 cm in length, 147.5 cm in width, and 178.5 cm in height, with a wheelbase of 239 cm. The vehicle's ground clearance stood at 15 cm, contributing to its ability to navigate various terrains.

The 2005-2006 Mitsubishi Minicab 660 CS 4WD offered seating for up to four passengers, with five doors for easy access. Its compact size and nimble turning circle of 4.3 meters made it well-suited for urban and tight parking situations.

With a fuel tank capacity of 10.5 US gallons (8.7 UK gallons or 40 liters), this model allowed for reasonable driving distances before refueling, making it suitable for daily commuting and light cargo transport.

This introduction provides an overview of the key features and specifications of the 2005-2006 Mitsubishi Minicab 660 CS 4WD, setting the stage for a more detailed exploration of its various aspects.

Engine Specifications

The engine specifications of the 2005-2006 Mitsubishi Minicab 660 CS 4WD reveal the heart of this compact and practical vehicle. Powering this model was a 657 cm³ engine with the engine code 3G83. This 3-cylinder SOHC engine was designed to deliver efficient performance, making it a suitable choice for urban driving and light-duty applications.

The engine produced a maximum power output of 48.6 PS (48 bhp) at 6000 rpm, ensuring that the Minicab 660 CS 4WD had adequate power for its intended purposes. Additionally, the engine generated a maximum torque of 61.7 Nm (45.5 lb.ft) at 4000 rpm, contributing to the vehicle's ability to handle various driving conditions with ease.

One of the notable aspects of this engine was its compliance with the 2005 emission regulation, which aimed for a 75% reduction in emissions. This made the Minicab 660 CS 4WD a more environmentally friendly choice, aligning with modern environmental standards.

With regular gasoline as its fuel type, the engine struck a balance between performance and fuel efficiency. The specific fuel consumption in different driving modes, such as city and highway, contributed to the overall economical nature of this vehicle.

The engine specifications of the 2005-2006 Mitsubishi Minicab 660 CS 4WD showcased its ability to provide sufficient power while being mindful of emissions and fuel efficiency, making it a practical choice for those seeking a versatile and eco-conscious vehicle.

Fuel Tank Capacity

The fuel tank capacity of the 2005-2006 Mitsubishi Minicab 660 CS 4WD was designed to strike a balance between convenience and efficiency. This compact vehicle was equipped with a fuel tank that could hold approximately 10.5 US gallons (8.7 UK gallons or 40 liters) of fuel.

This capacity allowed for reasonable driving distances between refueling stops, making the Minicab 660 CS 4WD suitable for daily commuting, short trips, and light cargo transport. The ability to cover longer distances without frequent stops for refueling was a practical feature appreciated by drivers who needed a reliable and economical vehicle.

With a focus on fuel efficiency and economy, the fuel tank capacity of this model ensured that owners could maximize their time on the road while minimizing the hassle of frequent refueling, making it a convenient choice for various driving needs.

Fuel Consumption and Efficiency

The fuel consumption and efficiency of the 2005-2006 Mitsubishi Minicab 660 CS 4WD were key considerations for drivers seeking an economical and practical vehicle. This model featured a 657 cm³ engine with specifications designed to balance performance and fuel efficiency.

In terms of fuel consumption, the Minicab 660 CS 4WD delivered impressive results. While specific figures may vary depending on driving conditions and individual driving habits, this vehicle was known to achieve approximately 38.5 mpg in the US, 46.3 mpg in the UK, or 6.1 L/100km in combined driving cycles.

These fuel efficiency numbers highlighted the model's ability to make the most out of its fuel tank capacity, allowing owners to enjoy longer drives with fewer refueling stops. This level of efficiency was particularly advantageous for city commuters and drivers covering shorter distances on a regular basis.

The combination of a compact engine and a focus on fuel efficiency made the 2005-2006 Mitsubishi Minicab 660 CS 4WD a practical choice for those seeking an eco-conscious vehicle without sacrificing essential performance capabilities. It offered an optimal balance between power and economy for various driving needs.

Dimensions and Sizes

The dimensions and sizes of the 2005-2006 Mitsubishi Minicab 660 CS 4WD played a crucial role in defining its compact yet practical design. This vehicle was crafted with an emphasis on maneuverability and space efficiency, making it a versatile choice for various driving needs.

The exterior of the Minicab 660 CS 4WD featured a length of approximately 339.5 cm, a width of around 147.5 cm, and a height of about 178.5 cm. These dimensions made it well-suited for urban driving, as it could easily navigate through crowded streets and tight parking spaces.

The wheelbase of this model measured 239 cm, contributing to its stability on the road and providing a comfortable ride for passengers. The compact dimensions of the vehicle, combined with a nimble turning circle of 4.3 meters, allowed for easy maneuvering in urban and confined environments.

Additionally, the Minicab 660 CS 4WD had a ground clearance of 15 cm, providing ample protection against obstacles on the road while ensuring a smooth ride. The vehicle's weight was approximately 940 kg, making it a lightweight and fuel-efficient option.

Inside the vehicle, it could accommodate up to four passengers with five doors for convenient access. The practical dimensions and sizes of the 2005-2006 Mitsubishi Minicab 660 CS 4WD made it an ideal choice for city commuters and those in need of a compact vehicle that maximized interior space while maintaining a small footprint on the road.

Wheel Specifications

The wheel specifications of the 2005-2006 Mitsubishi Minicab 660 CS 4WD contributed to its overall performance, stability, and handling characteristics. These specifications were carefully designed to provide a balance between functionality and practicality.

The front and rear wheels of this model were equipped with tires that had dimensions of 145 R12-6PR. These tires were chosen for their ability to offer a comfortable ride while ensuring adequate traction on various road surfaces. The "6PR" designation indicated a 6-ply rating, which added to the durability of the tires, making them suitable for a range of driving conditions.

The choice of these wheel specifications aimed to enhance the vehicle's handling and maneuverability while providing a smooth and stable ride for occupants. The dimensions of the tires and the overall wheel setup were tailored to the compact design of the Minicab 660 CS 4WD, ensuring that it could navigate urban environments with ease and confidence.

In summary, the wheel specifications of the 2005-2006 Mitsubishi Minicab 660 CS 4WD were carefully selected to complement the vehicle's overall performance and contribute to a comfortable and controlled driving experience. These specifications were a key part of the vehicle's design, helping it excel in various driving conditions.

Trim Levels and Variants

The 2005-2006 Mitsubishi Minicab 660 CS 4WD was available in various trim levels and variants to cater to different preferences and needs of drivers. These trim levels and variants offered a range of features and options, allowing buyers to customize their vehicles to suit their specific requirements.

While specific details about the trim levels and variants may vary by region and market, some common options included different levels of interior comfort and convenience features. Buyers could choose from various upholstery materials, interior colors, and infotainment systems to create a personalized driving experience.

Additionally, some trim levels may have included extra exterior features such as alloy wheels, body-colored bumpers, or unique badges to enhance the vehicle's aesthetics. These cosmetic enhancements allowed drivers to add a touch of individuality to their Minicab 660 CS 4WD.

Furthermore, safety features and technology options may have varied between trim levels, providing buyers with choices to suit their priorities, whether it be advanced safety systems, connectivity, or additional storage solutions.

Overall, the availability of different trim levels and variants for the 2005-2006 Mitsubishi Minicab 660 CS 4WD allowed buyers to select a configuration that matched their preferences and requirements, ensuring that this compact and practical vehicle could cater to a wide range of drivers and their specific needs.

MPG (Miles Per Gallon) Ratings

The MPG (Miles Per Gallon) ratings of the 2005-2006 Mitsubishi Minicab 660 CS 4WD were an essential aspect of its appeal, especially for those seeking a vehicle that offered both practicality and fuel efficiency.

While the specific MPG figures could vary depending on driving conditions and individual driving habits, this model was known to provide commendable fuel economy. It typically achieved approximately 38.5 mpg in the US, 46.3 mpg in the UK, or 6.1 L/100km in combined driving cycles.

These MPG ratings highlighted the Minicab 660 CS 4WD's ability to cover significant distances on a single tank of fuel, making it a cost-effective choice for daily commuting and light-duty applications. The efficiency of the vehicle was particularly advantageous in urban environments, where stop-and-go traffic and short trips were common.

The combination of a compact engine, lightweight design, and a focus on fuel efficiency contributed to these impressive MPG ratings. Owners of the 2005-2006 Mitsubishi Minicab 660 CS 4WD could enjoy the benefits of extended driving ranges and reduced fuel expenses, making it a practical and economical choice for their transportation needs.

Fuel Capacity Details

The fuel capacity details of the 2005-2006 Mitsubishi Minicab 660 CS 4WD played a crucial role in defining its practicality and suitability for various driving needs. This compact vehicle was designed with a fuel tank that could hold approximately 10.5 US gallons (8.7 UK gallons or 40 liters) of fuel.

This capacity allowed drivers to cover reasonable distances between refueling stops, making the Minicab 660 CS 4WD a convenient choice for daily commuting, short trips, and light cargo transport. The ability to travel extended distances without the need for frequent refueling added to the vehicle's overall efficiency and practicality.

The focus on fuel capacity details was essential in ensuring that owners could make the most out of their driving experience, reducing the inconvenience of frequent stops at the fuel station. With a balance between a compact design and adequate fuel storage, this model provided a satisfying driving range while maintaining a small and maneuverable footprint on the road.

Overview of Fuel Average

The overview of the fuel average for the 2005-2006 Mitsubishi Minicab 660 CS 4WD is an important aspect to consider for those seeking a practical and efficient vehicle. This model was designed with a strong focus on fuel economy, making it a sensible choice for various driving needs.

While specific fuel economy figures could vary depending on factors such as driving conditions and individual driving habits, the Minicab 660 CS 4WD typically delivered impressive results. It achieved approximately 38.5 mpg in the US, 46.3 mpg in the UK, or 6.1 L/100km in combined driving cycles.

This fuel efficiency was a testament to the vehicle's ability to maximize mileage on a single tank of fuel. Whether used for daily commuting, short trips, or light cargo transport, the Minicab 660 CS 4WD offered a cost-effective and environmentally friendly solution.

The combination of a compact engine, lightweight design, and a commitment to fuel efficiency made this vehicle a practical choice for those seeking to minimize fuel expenses while enjoying a satisfying driving experience. The overview of the fuel average underlines the Minicab 660 CS 4WD's ability to strike a balance between performance and economy.

Generational Changes and Upgrades

The 2005-2006 Mitsubishi Minicab 660 CS 4WD represented a specific era in the vehicle's generational timeline, and while there were no drastic generational changes or major upgrades during this period, it's important to acknowledge the evolutionary progression of this model.

Mitsubishi's Minicab series, including the 660 CS 4WD, has a history of consistent improvements and refinements. The 2005-2006 version was a continuation of this tradition, building upon the strengths of its predecessors.

During this era, the focus was on maintaining the vehicle's compact and practical design while incorporating incremental enhancements in areas such as engine efficiency, emissions compliance, and safety features. The vehicle continued to offer reliable performance and fuel economy, meeting the demands of its target audience.

While the overall design and core features of the 2005-2006 Mitsubishi Minicab 660 CS 4WD remained relatively consistent with the previous generation, subtle refinements in technology and materials were likely incorporated to keep the model competitive in the market.

In essence, the 2005-2006 iteration of the Minicab 660 CS 4WD was a testament to Mitsubishi's commitment to continuous improvement and innovation. While there may not have been significant generational changes during this period, the vehicle's reliability and practicality remained its defining characteristics.

Interior and Cargo Space

The interior and cargo space of the 2005-2006 Mitsubishi Minicab 660 CS 4WD were designed to maximize practicality within the constraints of its compact dimensions. This model provided a comfortable cabin and versatile cargo options suitable for a range of uses.

Despite its compact exterior, the interior of the Minicab 660 CS 4WD was thoughtfully designed to make the most of available space. The vehicle could comfortably seat up to four passengers, offering them a functional and ergonomic cabin layout.

The seats were designed with comfort in mind, providing adequate support for both the driver and passengers. While the exact interior dimensions are not specified, Mitsubishi aimed to create a well-organized and user-friendly cockpit.

In terms of cargo space, the Minicab 660 CS 4WD offered practical solutions. The rear cargo area was designed to accommodate various types of cargo, making it suitable for light hauling and transporting goods. The rear seats were likely foldable or removable to expand the cargo capacity when needed.

The overall interior and cargo space of this model were tailored to meet the needs of urban drivers and those looking for a compact vehicle with versatility. It struck a balance between passenger comfort and cargo-carrying capabilities, making it a practical choice for a variety of daily tasks and transportation needs.

Safety Features

Safety was a significant consideration in the design of the 2005-2006 Mitsubishi Minicab 660 CS 4WD. While this compact vehicle may not have featured an extensive array of advanced safety technologies, it incorporated several essential safety features to protect both the driver and passengers.

One of the standard safety features in this model was the inclusion of driver and passenger airbags. These airbags were designed to deploy in the event of a collision, providing an additional layer of protection in case of an accident.

Additionally, the vehicle likely featured anti-lock brakes (ABS) as an available option. ABS helps prevent wheel lockup during hard braking, enhancing steering control and reducing the risk of skidding in slippery conditions.

While side airbags and advanced safety systems like collision mitigation or lane-keeping assist may not have been common in vehicles of this class during that era, the Minicab 660 CS 4WD still prioritized basic safety measures to ensure a safer driving experience.

Overall, the 2005-2006 Mitsubishi Minicab 660 CS 4WD emphasized fundamental safety features, including airbags and potentially ABS, to provide drivers and passengers with a level of protection in the event of an accident.

Maintenance and Ownership Costs

Maintenance and ownership costs are crucial considerations for any vehicle owner, and the 2005-2006 Mitsubishi Minicab 660 CS 4WD aimed to provide an economical ownership experience.

When it comes to routine maintenance, this model likely featured a straightforward and cost-effective maintenance schedule. Regular oil changes, tire rotations, and brake inspections were essential to keep the vehicle in optimal working condition. Mitsubishi's reputation for reliability and durability meant that owners could expect minimal unexpected repair costs.

Furthermore, the compact size and design of the Minicab 660 CS 4WD contributed to lower fuel costs, as it was known for its impressive fuel economy. This made it an economical choice for daily commuting and city driving, helping owners save on fuel expenses over time.

Insurance costs for the vehicle were likely reasonable, thanks to its compact size and the availability of safety features such as airbags and potentially ABS. The affordability of insurance coverage added to the overall cost-effectiveness of ownership.

In terms of resale value, Mitsubishi vehicles traditionally held their value well, which could translate to a higher resale price when the time came to upgrade to a newer vehicle.

Overall, the 2005-2006 Mitsubishi Minicab 660 CS 4WD aimed to provide a cost-effective ownership experience. Its low maintenance requirements, fuel efficiency, and potential for strong resale value made it an attractive choice for drivers seeking economical transportation without sacrificing practicality.

Conclusion: Key Takeaways for Mitsubishi Minicab 660 CS 4WD

In conclusion, the 2005-2006 Mitsubishi Minicab 660 CS 4WD was a compact and practical vehicle designed to meet the needs of urban drivers and those seeking an economical and versatile mode of transportation. While it may not have featured extensive advanced technologies or luxurious amenities, it excelled in several key areas that made it a compelling choice:

1. Fuel Efficiency: The Minicab 660 CS 4WD was known for its impressive fuel economy, allowing owners to enjoy extended driving ranges and reduced fuel expenses.

2. Compact Design: Its compact exterior dimensions made it easy to navigate through crowded city streets and park in tight spaces, enhancing its urban usability.

3. Basic Safety Features: Standard safety features such as airbags and potentially ABS were in place to provide a level of protection in the event of an accident.

4. Low Ownership Costs: With a straightforward maintenance schedule and economical fuel consumption, the ownership costs of this model were reasonable and budget-friendly.

5. Versatile Interior: The interior offered comfortable seating for up to four passengers and the flexibility to carry cargo when needed, making it suitable for various transportation needs.

6. Reliability: Mitsubishi's reputation for reliability and durability meant that owners could expect a dependable vehicle with minimal unexpected repair costs.

7. Eco-Friendly: The engine was designed to comply with emission regulations, aligning with modern environmental standards.

While it may not have boasted the latest in automotive technology, the 2005-2006 Mitsubishi Minicab 660 CS 4WD provided a practical and economical solution for drivers looking for a dependable and cost-effective mode of transportation, especially in urban and commuter settings.

FAQ: 2005-2006 Mitsubishi Minicab 660 CS 4WD