1997 Subaru Legacy 2.0 TX type S Specs


OVERVIEW

With a fuel consumption of 26.4 mpg US - 31.7 mpg UK - 8.9 L/100km, a weight of 2843 lbs (1290 kg), the Subaru Legacy 2.0 TX type S has a water cooling horizontal opposite 4 cylinder SOHC16 valve engine, a Regular gasoline engine EJ20. This engine EJ20 produces a maximum power of 136.8 PS (135 bhp - 100.6 kW) at 5600 rpm and a maximum torque of 181.4 Nm (133.8 lb.ft - 18.5 kg.m) at 4000 rpm. The engine power is transmitted to the road by the four wheel drive (4WD) with a 4AT gearbox. For stopping power, the Subaru Legacy 2.0 TX type S braking system includes Disk at the rear and Ventilated disk at the front. Stock tire sizes are 195/60 on 15 inch rims at the rear and 195/60 on 15 inch rims at the front. Chassis details - Subaru Legacy 2.0 TX type S has McPherson strut rear suspension and McPherson strut front suspension for road holding and ride confort.

Add to compare list

GENERAL INFORMATION
Complectation Name2.0 TX type S
Period of ProductionSep 1997 - Jun 1998
Drive Wheels - Traction - Drivetrain4WD
Body TypeSedan
Transmission Gearbox - Number of Speeds4AT
Engine Size - Displacement - Engine Capacity1994 cm3 or 121.6 cu-in
Frame NameE-BD5
Price of New Car in Tokyo, Yen1946000

SUBARU LEGACY 2.0 TX TYPE S SIZE, DIMENSIONS AND WEIGHT
Exterior Length460.5 cm or 181.29 inches
Exterior Width169.5 cm or 66.73 inches
Exterior Height140.5 cm or 55.31 inches
Interior Length201 cm or 79.13 inches
Interior Width141.5 cm or 55.7 inches
Interior Height115.5 cm or 45.47 inches
Wheelbase263 cm or 103.54 inches
Front Axle Length146 cm or 57.48 inches
Rear Axle Length145.5 cm or 57.28 inches
Ride Height - Ground Clearance16 cm or 6.29 inches
Weight1290 kg or 2843 lbs
Num. of Seats5
Num. of Doors4
Minimum Turning Circle - Turning Diameter, m5.3
Fuel Tank Capacity15.8 US gallons
13.1 UK gallons
60 L

SUBARU LEGACY 2.0 TX TYPE S ENGINE TECHNICAL DATA
Engine CodeEJ20
Maximum Power - Output - Horsepower136.8 PS or 135 bhp or 100.6 kW
Maximum Power RPM5600 rpm
Maximum Torque181.4 Nm or 133.8 lb.ft or 18.5 kg.m
Maximum Torque RPM4000 rpm
Engine Type - Number of Cylinderswater cooling horizontal opposite 4 cylinder SOHC16 valve
Fuel TypeRegular gasoline
Fuel Consumption (10/15 mode)26.4 mpg US
31.7 mpg UK
8.9 L/100km
Fuel Consumption (60 km/h mode)44.3 mpg US
53.2 mpg UK
5.3 L/100km
1st Gear Ratio2.785
2nd Gear Ratio1.545
3rd Gear Ratio1
4th Fear Ratio0.694
Rear Gear Ratio2.272
Compression Ratio10
Bore9.2 cm or 3.62 inches
Stroke7.5 cm or 2.95 inches

SUBARU LEGACY 2.0 TX TYPE S SUSPENSION
Front Brakes - Disc DimensionsVentilated disk
Rear Brakes - Disс DimensionsDisk
Front SuspensionMcPherson strut
Rear SuspensionMcPherson strut
Front Tyres - Rims Dimensions195/60 R15
Rear Tyres - Rims Dimensions195/60 R15
Tyres - Rims Dimensions195 / 60 R15
Aluminium DiskStandart

SUBARU LEGACY 2.0 TX TYPE S EXTERIOR
SunroofNo
Tilt SunroofNo
Twin SunroofNo
Front SpoilerNo
Rear SpoilerNo
Power Adjustable Door MirrorsStandart
Xenon LampsNo
Front Fog LampsStandart
Rear Fog LampsNo
Cornering LampsNo
Ultraviolet Glass ProtectionNo
Roof RailNo
Back WiperStandart

SUBARU LEGACY 2.0 TX TYPE S INTERIOR
Power WindowStandart
Power SteeringStandart
TachometerStandart
Centralized Door LockStandart
Keyless EnterStandart
Right Hand DriveStandart
Left Hand DriveNo
Leather WindingNo
Adjustable SteeringStandart
Telescopic SteeringNo
Tilt SteeringStandart
Wood PanelNo
Cruise ControlNo
Leather SeatNo
Power Adjustable SeatsNo
Power Ajustable Front SeatNo
Power Ajustable Back SeatNo
Reclining SeatsNo
Removable SeatsStandart
Turning SeatsNo

SUBARU LEGACY 2.0 TX TYPE S SAFETY
Drivers AirbagStandart
Passengers AirbagOption
Side AirbagNo
Side Impact BarStandart
TCSNo
Break AssistNo
Parking RadarNo
Central Power Window ControlNo
Additional Stop LightStandart
Safety Belt PretensionerNo
Safety Belt LimiterNo
3 Point Safety BeltStandart
Child Car RestraintsStandart
Durable FrameNo

AMENITY
CoolerNo
Automatic Air ConditioningStandart
Twin Conditioning SystemNo
Air PurifierNo
RadioStandart
Autoreverse CasetteStandart
CD PlayerNo
CD ChangerNo
MD PalyerNo
MD ChangerNo

OTHER
LSDStandart
Front StabilizerStandart
Rear StablilizerStandart
Special EquipmentNo


- Present
- Option
- Not Present (or Dealer Option)



More photos Subaru Legacy


By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on April 16, 2024
πŸ“Œ Introduction to the 1997-1998 Subaru Legacy 2.0 TX Type S
πŸ“Œ Engine Specifications of the 1997-1998 Legacy 2.0 TX Type S
πŸ“Œ Dimensions and Sizes
πŸ“Œ Fuel Tank Capacity
πŸ“Œ Fuel Consumption Ratings
πŸ“Œ Fuel Average (MPG)
πŸ“Œ Wheel Options
πŸ“Œ Trim Levels and Generations
πŸ“Œ Notable Features
πŸ“Œ Conclusion: Summary of Specs and Features
πŸ“Œ FAQ: Common Inquiries About the 1997-Subaru Legacy 2.0 TX Type S

Introduction to the 1997-1998 Subaru Legacy 2.0 TX Type S

The 1997-1998 Subaru Legacy 2.0 TX Type S, introduced during its production period from September 1997 to June 1998, marked a significant entry in the Legacy lineup. This sedan model showcased a blend of features and specifications that made it stand out in the automotive market of its time.

One notable aspect of this Legacy variant was its drivetrain configuration, featuring a 4WD system that provided excellent traction and stability in various driving conditions. This made it a suitable choice for those seeking reliable performance in different weather and road scenarios.

Under the hood, the 1997-1998 Legacy 2.0 TX Type S boasted a 1994 cm³ engine, designated as the EJ20. This engine, a water-cooled horizontal opposite 4-cylinder SOHC16 valve, delivered a maximum power output of 136.8 PS (135 bhp) at 5600 rpm and a maximum torque of 181.4 Nm at 4000 rpm. With regular gasoline as its fuel type, it offered a balanced combination of power and efficiency.

The exterior dimensions of the Legacy 2.0 TX Type S provided a comfortable and spacious ride for its occupants. It measured 460.5 cm in length, 169.5 cm in width, and 140.5 cm in height, with a wheelbase of 263 cm. The sedan had four doors and could accommodate up to five passengers, with a well-thought-out interior that emphasized both comfort and practicality.

In terms of safety features, the model came equipped with a driver's airbag as standard, while the passenger airbag was an optional addition. Additionally, it featured standard side impact bars, 3-point safety belts, and provisions for child car restraints, enhancing occupant protection.

The Legacy 2.0 TX Type S also featured front fog lamps, power windows, power steering, centralized door locking, and a range of other amenities that contributed to a convenient and enjoyable driving experience. Its 4-speed automatic transmission further added to the ease of operation.

With a well-balanced combination of power, safety, and comfort, the 1997-1998 Subaru Legacy 2.0 TX Type S left a lasting impression on the automotive landscape during its production years. Its specifications and features catered to a wide range of drivers, making it a popular choice in its segment.

Engine Specifications of the 1997-1998 Legacy 2.0 TX Type S

The heart of the 1997-1998 Subaru Legacy 2.0 TX Type S lies beneath its sleek exterior, where its engine specifications define its performance capabilities. This sedan was equipped with a 2.0-liter engine, designated as the EJ20, which played a crucial role in delivering a balanced combination of power and efficiency.

The EJ20 engine was a water-cooled horizontal opposite 4-cylinder unit with a single overhead camshaft (SOHC) configuration and 16 valves. This design allowed for efficient airflow and combustion, contributing to both power and fuel economy.

One of the standout features of this engine was its maximum power output. It generated 136.8 PS (135 bhp) at 5600 rpm, providing ample power for daily driving and highway cruising. The engine's responsiveness and smooth power delivery made it a reliable choice for a wide range of driving scenarios.

Torque, another essential aspect of engine performance, was also a strong suit of the EJ20. It produced a maximum torque of 181.4 Nm at 4000 rpm, ensuring good low-end and mid-range performance. This translated into a responsive and enjoyable driving experience, particularly during acceleration and overtaking maneuvers.

The 1997-1998 Legacy 2.0 TX Type S utilized regular gasoline as its fuel source, making it convenient for everyday use. The engine's compression ratio, bore, and stroke were optimized to achieve a balance between power and fuel efficiency.

When it came to fuel consumption, the Legacy 2.0 TX Type S offered respectable figures. In a city-driving scenario (10/15 mode), it achieved a fuel consumption rating of 26.4 mpg US or 31.7 mpg UK (8.9 L/100km). On the highway (60 km/h mode), it demonstrated even better efficiency, with a fuel consumption rating of 44.3 mpg US or 53.2 mpg UK (5.3 L/100km).

The 4-speed automatic transmission of this Subaru sedan complemented the engine's performance characteristics, ensuring smooth gear changes and ease of operation. Combined with its drivetrain, this engine formed the core of the 1997-1998 Subaru Legacy 2.0 TX Type S, delivering a satisfying driving experience for those who appreciated a well-balanced blend of power and efficiency.

Dimensions and Sizes

The dimensions and sizes of the 1997-1998 Subaru Legacy 2.0 TX Type S played a crucial role in defining its exterior appearance and interior space. This sedan model was designed with careful consideration of both aesthetics and practicality.

Starting with its exterior, the Legacy 2.0 TX Type S measured 460.5 cm (181.29 inches) in length, giving it a substantial and commanding presence on the road. Its width was 169.5 cm (66.73 inches), providing a comfortable width that allowed for easy maneuvering while maintaining stability.

In terms of height, the sedan stood at 140.5 cm (55.31 inches), contributing to its aerodynamic profile while ensuring sufficient headroom for passengers. These exterior dimensions combined to create a well-proportioned and visually appealing vehicle.

Inside the cabin, the Legacy 2.0 TX Type S offered generous interior dimensions. The interior length measured 201 cm (79.13 inches), providing ample legroom for both front and rear passengers. The interior width was 141.5 cm (55.7 inches), allowing for a comfortable seating arrangement for up to five occupants.

The interior height of 115.5 cm (45.47 inches) ensured that passengers had adequate headroom, contributing to a spacious and comfortable interior atmosphere. These interior dimensions made the sedan well-suited for long journeys and daily commutes, providing a pleasant driving experience for both the driver and passengers.

The wheelbase of the 1997-1998 Legacy 2.0 TX Type S was 263 cm (103.54 inches), which not only contributed to its stable ride but also enhanced its handling characteristics. The sedan featured four doors, providing easy access to both the front and rear seating areas.

In addition to these dimensions, other key details included a minimum turning circle with a turning diameter of 5.3 meters, ensuring maneuverability in tight spaces. The sedan's weight was 1290 kg (2843 lbs), contributing to its overall efficiency and performance.

With a focus on both exterior aesthetics and interior comfort, the dimensions and sizes of the 1997-1998 Subaru Legacy 2.0 TX Type S were carefully designed to create a well-rounded sedan that catered to the needs of its occupants while maintaining an attractive appearance on the road.

Fuel Tank Capacity

The fuel tank capacity of the 1997-1998 Subaru Legacy 2.0 TX Type S was a key specification that determined its range and convenience during long drives. This sedan was equipped with a fuel tank designed to hold a substantial amount of fuel, ensuring that drivers had the freedom to travel without frequent refueling stops.

The fuel tank of the Legacy 2.0 TX Type S had a capacity of 15.8 US gallons, equivalent to 13.1 UK gallons or approximately 60 liters. This generous fuel tank size provided a comfortable cruising range, especially when combined with the vehicle's fuel-efficient engine.

With a capacity like this, the Legacy 2.0 TX Type S was well-suited for both daily commuting and longer journeys, offering convenience and reducing the need for frequent stops at gas stations. Drivers could enjoy extended drives without the worry of running out of fuel quickly.

The combination of a spacious fuel tank and the sedan's fuel-efficient engine made it an ideal choice for those who valued a balance between power and fuel economy. Whether for urban commuting or highway travel, the 1997-1998 Subaru Legacy 2.0 TX Type S provided a satisfying driving experience with its ample fuel tank capacity.

Fuel Consumption Ratings

The fuel consumption ratings of the 1997-1998 Subaru Legacy 2.0 TX Type S were a crucial factor for prospective buyers, as they determined the sedan's efficiency in terms of fuel usage. These ratings shed light on how far the vehicle could travel on a given amount of fuel, an important consideration for both budget-conscious drivers and those concerned about environmental impact.

In a city-driving scenario, often referred to as the "10/15 mode," the Legacy 2.0 TX Type S exhibited a fuel consumption rating of 26.4 mpg US or 31.7 mpg UK (8.9 L/100km). This rating indicated the car's performance in typical urban traffic conditions, where frequent stops and starts are common. Despite its ample power, the sedan showcased efficient fuel usage in city driving.

For highway driving at a constant speed of 60 km/h, the Legacy 2.0 TX Type S excelled in terms of fuel efficiency. In this scenario, it achieved a fuel consumption rating of 44.3 mpg US or 53.2 mpg UK (5.3 L/100km). This high fuel economy figure demonstrated the sedan's ability to cover long distances with minimal fuel consumption, making it an excellent choice for extended road trips.

The dual nature of these fuel consumption ratings showcased the versatility of the 1997-1998 Subaru Legacy 2.0 TX Type S. It delivered both efficiency in city traffic and impressive mileage on the highway, catering to a wide range of driving preferences and needs. Whether navigating urban streets or embarking on long journeys, this sedan struck a commendable balance between performance and fuel economy.

Fuel Average (MPG)

The fuel average, measured in miles per gallon (MPG), is a key metric that reflects the overall efficiency of the 1997-1998 Subaru Legacy 2.0 TX Type S. This metric provides valuable insights into how far the vehicle could travel on a gallon of fuel, helping drivers make informed decisions regarding fuel consumption and cost.

In city driving conditions, often referred to as the "10/15 mode," the Legacy 2.0 TX Type S achieved an average fuel consumption rating of approximately 26.4 mpg US or 31.7 mpg UK. This rating highlighted the sedan's performance in typical urban traffic scenarios, where frequent stops and slower speeds can impact fuel efficiency.

On the open highway, the Legacy 2.0 TX Type S excelled in terms of fuel economy, boasting an impressive average of around 44.3 mpg US or 53.2 mpg UK. This exceptional highway mileage showcased the sedan's ability to cover long distances with minimal fuel consumption, making it an excellent choice for extended road trips and highway cruising.

The dual nature of these fuel average figures demonstrated the versatility of the 1997-1998 Subaru Legacy 2.0 TX Type S. It offered an optimal balance between efficiency in city driving and remarkable fuel economy on the highway, ensuring that drivers could enjoy both spirited urban commutes and economical long-distance travel. These fuel average ratings underlined the sedan's appeal to a broad range of drivers seeking both power and efficiency in their daily and long-distance journeys.

Wheel Options

The wheel options available for the 1997-1998 Subaru Legacy 2.0 TX Type S added both style and functionality to this sedan. Wheels play a crucial role in a vehicle's overall appearance and performance, and the Legacy 2.0 TX Type S offered a range of choices to cater to various preferences.

One of the standard wheel options for this sedan featured 195/60 R15 tires. These tires were mounted on 15-inch rims, which not only provided a comfortable and smooth ride but also contributed to the vehicle's stability and handling. The 195mm tire width struck a balance between grip and efficiency, enhancing traction in various driving conditions.

These wheel options were not only functional but also added to the vehicle's visual appeal. The 15-inch rims complemented the sedan's design, giving it a distinctive and stylish appearance on the road.

While the 1997-1998 Subaru Legacy 2.0 TX Type S offered a standard wheel option, some owners may have opted for aftermarket wheels to further personalize their vehicle. Aftermarket wheels come in various sizes and styles, allowing drivers to customize the look and performance of their vehicle according to their preferences.

In summary, the wheel options for the Legacy 2.0 TX Type S included 15-inch rims with 195/60 R15 tires as a standard choice, providing a blend of style and performance. These options allowed owners to enjoy a comfortable ride while maintaining the sedan's appealing appearance on the road.

Trim Levels and Generations

The 1997-1998 Subaru Legacy 2.0 TX Type S was part of a well-regarded lineage of vehicles known for their blend of performance, comfort, and reliability. To understand its place within the Legacy family and its trim levels during that period, let's explore the trim levels and generations of this iconic sedan.

Generations:
The 1997-1998 Legacy 2.0 TX Type S belonged to the second generation of the Subaru Legacy, which was internally designated as the "BD/BG" series. This generation marked a significant step forward in terms of design, engineering, and technology compared to its predecessor. It retained the core features that made the Legacy popular while introducing enhancements in various aspects.

Trim Levels:
Within the 1997-1998 Legacy range, the 2.0 TX Type S represented one of the higher-end trim levels available during that period. This trim level offered a range of features and specifications that set it apart from the base models. Some common features found in the 2.0 TX Type S trim level might have included leather upholstery, power windows and locks, alloy wheels, and additional interior and exterior styling enhancements. It was positioned to cater to drivers seeking a more premium and well-equipped sedan.

The Legacy lineup typically included various trim levels to accommodate different preferences and budgets, ranging from the more basic models to the higher-end variants like the 2.0 TX Type S. Each trim level offered a unique combination of features, allowing buyers to choose the one that best suited their needs and desires.

Overall, the 1997-1998 Subaru Legacy 2.0 TX Type S was a noteworthy member of the second-generation Legacy family, offering a balance of performance and comfort within its trim level. It continued the Legacy's reputation for reliability and versatility, appealing to a diverse range of drivers during its production years.

Notable Features

The 1997-1998 Subaru Legacy 2.0 TX Type S was known for a range of notable features that contributed to its popularity and appeal among drivers. These features were designed to enhance the sedan's performance, comfort, and overall driving experience. Let's delve into some of the key features that set this model apart:

1. All-Wheel Drive (AWD): The Legacy 2.0 TX Type S came equipped with Subaru's renowned AWD system, providing excellent traction and stability in various road and weather conditions. This feature enhanced the sedan's handling and ensured confident driving, especially in adverse weather.

2. Powerful Engine: Under the hood, the sedan housed a 2.0-liter engine (EJ20) that delivered a substantial power output of 136.8 PS (135 bhp). This engine provided brisk acceleration and a responsive driving experience, making it well-suited for a variety of driving scenarios.

3. Fuel Efficiency: Despite its power, the Legacy 2.0 TX Type S maintained respectable fuel efficiency, with impressive ratings for both city and highway driving. This made it an economical choice for daily commuting and long-distance travel.

4. Comfortable Interior: The sedan's interior featured spacious dimensions, comfortable seating, and a well-thought-out layout. It accommodated up to five passengers, offering ample legroom and headroom for both front and rear occupants.

5. Safety Features: Safety was a priority, with features such as a driver's airbag, side impact bars, 3-point safety belts, and provisions for child car restraints. These safety measures contributed to occupant protection.

6. Stylish Exterior: The Legacy 2.0 TX Type S boasted an attractive exterior design with clean lines and a sleek profile. While it maintained a classic sedan look, its design elements added a touch of elegance to its appearance.

7. Convenience: The sedan came equipped with power windows, power steering, centralized door locking, and other amenities that enhanced convenience and ease of use. These features contributed to a pleasant driving experience.

8. Impressive Handling: With its well-tuned suspension and AWD system, the Legacy 2.0 TX Type S offered confident and agile handling. It could navigate curves and corners with poise, making it enjoyable to drive on winding roads.

9. Roomy Trunk: The sedan provided a spacious trunk area, offering ample cargo space for luggage and everyday items. This added practicality for drivers with varying needs.

10. Notable Legacy Lineage: As part of the Subaru Legacy family, the 2.0 TX Type S inherited the Legacy's reputation for durability and reliability, which appealed to drivers seeking a dependable vehicle.

In summary, the 1997-1998 Subaru Legacy 2.0 TX Type S was characterized by a combination of powerful performance, comfort, safety, and style. Its notable features contributed to its popularity and made it a well-rounded choice for a diverse range of drivers during its production years.

Conclusion: Summary of Specs and Features

The 1997-1998 Subaru Legacy 2.0 TX Type S, produced during this brief but significant period, offered a well-rounded package of specifications and features that made it a standout in its class. Let's summarize the key aspects that defined this iconic sedan:

Drivetrain and Performance:
- 4WD traction ensured excellent stability and traction in diverse driving conditions.
- The 2.0-liter EJ20 engine delivered a powerful 136.8 PS (135 bhp), providing responsive acceleration.
- Torque peaked at 181.4 Nm (133.8 lb.ft) for strong low-end and mid-range performance.
- A 4-speed automatic transmission ensured smooth gear changes and ease of operation.
- A compression ratio of 10 contributed to a balance of power and fuel efficiency.

Dimensions and Interior Space:
- The sedan featured an exterior length of 460.5 cm and a width of 169.5 cm, providing a commanding presence on the road.
- Spacious interior dimensions included a length of 201 cm, a width of 141.5 cm, and a height of 115.5 cm, offering ample room for up to five passengers.
- A wheelbase of 263 cm enhanced stability and ride comfort.
- The sedan's weight stood at 1290 kg, contributing to efficiency and performance.

Fuel Efficiency and Capacity:
- The fuel tank had a capacity of 15.8 US gallons (13.1 UK gallons or approximately 60 liters), providing a generous cruising range.
- Impressive fuel consumption ratings included 26.4 mpg US (31.7 mpg UK) in city driving and 44.3 mpg US (53.2 mpg UK) on the highway.

Safety and Features:
- Safety features encompassed a driver's airbag, side impact bars, 3-point safety belts, and provisions for child car restraints.
- Power windows, power steering, centralized door locking, and other amenities enhanced convenience.
- All-wheel drive (AWD) contributed to stable and confident handling in various conditions.

Styling and Design:
- The Legacy 2.0 TX Type S showcased a sleek and elegant exterior design with clean lines.
- The sedan's 15-inch wheels with 195/60 R15 tires added both style and functionality to its appearance.

Legacy Lineage:
- As part of the Subaru Legacy family, this model inherited the Legacy's reputation for durability and reliability, appealing to drivers seeking a dependable vehicle.

In conclusion, the 1997-1998 Subaru Legacy 2.0 TX Type S was a well-balanced sedan that offered a blend of power, efficiency, comfort, and safety. Its impressive specifications and features made it a popular choice among drivers during its production years, embodying the qualities that the Legacy series was known for.

FAQ: Common Inquiries About the 1997-1998 Subaru Legacy 2.0 TX Type S

What are the key differences between the 1997 and 1998 Subaru Legacy 2.0 TX Type S models?

The main distinction between the 1997 and 1998 models is the production period. The 1997 Legacy 2.0 TX Type S was produced from September 1997, while the 1998 model was manufactured until June 1998. This affects the availability of specific features and updates.

Can you explain the various trim levels available for the 1997-1998 Subaru Legacy 2.0 TX Type S?

The Legacy 2.0 TX Type S was a relatively high-end trim level during this period, offering a range of premium features. However, there were other trim levels available within the Legacy lineup, including base models and lower-tier trims. These variations might have had fewer features and a different price point.

How does the 1997-1998 Subaru Legacy 2.0 TX Type S compare to other generations of the Legacy?

The 1997-1998 Legacy 2.0 TX Type S belongs to the second generation of the Legacy, known as the "BD/BG" series. This generation introduced several improvements in design, technology, and performance compared to the previous generation. Subsequent generations of the Legacy continued to evolve, with advancements in safety, technology, and styling.

What engine powers the 1997-1998 Subaru Legacy 2.0 TX Type S, and what is its performance like?

The Legacy 2.0 TX Type S is equipped with a 2.0-liter EJ20 engine. This engine produces 136.8 PS (135 bhp) of power at 5600 rpm and offers a maximum torque of 181.4 Nm (133.8 lb.ft) at 4000 rpm. It delivers a balance of power and fuel efficiency, making it suitable for both city driving and highway cruising.

Can you provide details about the fuel economy of the 1997-1998 Subaru Legacy 2.0 TX Type S?

Certainly. In city driving conditions (10/15 mode), this sedan achieved a fuel consumption rating of 26.4 mpg US (31.7 mpg UK). On the highway (60 km/h mode), it demonstrated even better efficiency, with a rating of 44.3 mpg US (53.2 mpg UK). These figures highlight its commendable fuel economy.

What safety features are included in the 1997-1998 Legacy 2.0 TX Type S?

Safety features of this model encompassed a driver's airbag, side impact bars, 3-point safety belts, and provisions for child car restraints. It prioritized occupant protection, a crucial aspect of vehicle design.

Are there any notable changes or updates within the 1997-1998 Legacy 2.0 TX Type S model years?

While the fundamental specifications remained consistent, manufacturers sometimes make minor updates or improvements during production runs. It's advisable to check specific production dates and consult owner's manuals or dealership records for any model-specific updates or changes.

What distinguishes the Legacy 2.0 TX Type S from other Subaru Legacy models?

The Legacy 2.0 TX Type S is positioned as a higher-end trim level within the Legacy lineup. It offers a combination of features like all-wheel drive (AWD), a powerful engine, and premium amenities that set it apart from base or lower-tier models within the Legacy family.


Brian Wong - Senior Reviews Editor of cars-directory.net

Brian Wong / Author

Brian Wong is an accomplished automotive journalist and editor with a passion for cars. With over a decade of experience in the industry, he has established himself as a trusted voice in the automotive community. Brian has written extensively about a wide range of topics in the field, from the latest trends in car design to innovative safety features and emerging technologies. As a senior reviews editor, he is responsible for test driving and analyzing the latest cars on the market, providing readers with accurate and objective reviews. His articles are widely read and respected for their depth of knowledge and analysis. Brian is committed to staying at the forefront of the latest developments in the automotive industry, and is dedicated to sharing his expertise and insights with his readers.

Add Comment

 * - The field should be filled
* Your Name:
 Contact (e-mail, phone...):
* Comments:
Photos: