1994 Subaru Legacy 2.5 250T Specs


OVERVIEW

With a fuel consumption of 23 mpg US - 27.6 mpg UK - 10.2 L/100km, a weight of 2910 lbs (1320 kg), the Subaru Legacy 2.5 250T has a water cooling horizontal opposite 4 cylinder DOHC engine, a High octane premium gasoline engine EJ25. This engine EJ25 produces a maximum power of 162.2 PS (160 bhp - 119.3 kW) at 6000 rpm and a maximum torque of 210.8 Nm (155.5 lb.ft - 21.5 kg.m) at 2800 rpm. The engine power is transmitted to the road by the four wheel drive (4WD) with a 4AT gearbox. For stopping power, the Subaru Legacy 2.5 250T braking system includes Ventilated disk at the rear and Ventilated disk at the front. Stock tire sizes are 195/60 on 15 inch rims at the rear and 195/60 on 15 inch rims at the front. Chassis details - Subaru Legacy 2.5 250T has strut independent rear suspension and strut independent front suspension for road holding and ride confort.

Add to compare list

GENERAL INFORMATION
Complectation Name2.5 250T
Period of ProductionOct 1994 - May 1996
Drive Wheels - Traction - Drivetrain4WD
Body TypeSedan
Transmission Gearbox - Number of Speeds4AT
Engine Size - Displacement - Engine Capacity2457 cm3 or 149.9 cu-in
Frame NameE-BD9
Price of New Car in Tokyo, Yen2547000

SUBARU LEGACY 2.5 250T SIZE, DIMENSIONS AND WEIGHT
Exterior Length459.5 cm or 180.9 inches
Exterior Width169.5 cm or 66.73 inches
Exterior Height140.5 cm or 55.31 inches
Interior Length201 cm or 79.13 inches
Interior Width141.5 cm or 55.7 inches
Interior Height115.5 cm or 45.47 inches
Wheelbase263 cm or 103.54 inches
Front Axle Length146.5 cm or 57.67 inches
Rear Axle Length145.5 cm or 57.28 inches
Ride Height - Ground Clearance16 cm or 6.29 inches
Weight1320 kg or 2910 lbs
Num. of Seats5
Num. of Doors4
Minimum Turning Circle - Turning Diameter, m5.3
Fuel Tank Capacity15.8 US gallons
13.1 UK gallons
60 L

SUBARU LEGACY 2.5 250T ENGINE TECHNICAL DATA
Engine CodeEJ25
Maximum Power - Output - Horsepower162.2 PS or 160 bhp or 119.3 kW
Maximum Power RPM6000 rpm
Maximum Torque210.8 Nm or 155.5 lb.ft or 21.5 kg.m
Maximum Torque RPM2800 rpm
Engine Type - Number of Cylinderswater cooling horizontal opposite 4 cylinder DOHC
Fuel TypeHigh octane premium gasoline
Fuel Consumption (10/15 mode)23 mpg US
27.6 mpg UK
10.2 L/100km
Fuel Consumption (60 km/h mode)39.8 mpg US
47.8 mpg UK
5.9 L/100km
1st Gear Ratio2.785
2nd Gear Ratio1.545
3rd Gear Ratio1
4th Fear Ratio0.694
Rear Gear Ratio2.272
Compression Ratio10
Bore10 cm or 3.93 inches
Stroke7.9 cm or 3.11 inches

SUBARU LEGACY 2.5 250T SUSPENSION
Front Brakes - Disc DimensionsVentilated disk
Rear Brakes - Disс DimensionsVentilated disk
Front Suspensionstrut independent
Rear Suspensionstrut independent
Front Tyres - Rims Dimensions195/60 R15
Rear Tyres - Rims Dimensions195/60 R15
Tyres - Rims Dimensions195 / 60 R15

SUBARU LEGACY 2.5 250T EXTERIOR
SunroofNo
Tilt SunroofNo
Twin SunroofNo
Front SpoilerNo
Rear SpoilerNo
Power Adjustable Door MirrorsStandart
Xenon LampsNo
Front Fog LampsStandart
Rear Fog LampsNo
Cornering LampsNo
Ultraviolet Glass ProtectionNo
Roof RailNo
Back WiperStandart

SUBARU LEGACY 2.5 250T INTERIOR
Power WindowStandart
Power SteeringStandart
TachometerStandart
Centralized Door LockStandart
Keyless EnterStandart
Right Hand DriveStandart
Left Hand DriveNo
Leather WindingStandart
Adjustable SteeringStandart
Telescopic SteeringNo
Tilt SteeringStandart
Wood PanelStandart
Cruise ControlOption
Leather SeatOption
Power Adjustable SeatsNo
Power Ajustable Front SeatNo
Power Ajustable Back SeatNo
Reclining SeatsNo
Removable SeatsStandart
Turning SeatsNo

SUBARU LEGACY 2.5 250T SAFETY
Drivers AirbagOption
Passengers AirbagNo
Side AirbagNo
Side Impact BarStandart
TCSNo
Break AssistNo
Parking RadarNo
Central Power Window ControlNo
Additional Stop LightStandart
Safety Belt PretensionerNo
Safety Belt LimiterNo
3 Point Safety BeltStandart
Child Car RestraintsStandart
Durable FrameNo

AMENITY
CoolerNo
Automatic Air ConditioningStandart
Twin Conditioning SystemNo
Air PurifierNo
RadioStandart
Autoreverse CasetteStandart
CD PlayerStandart
CD ChangerNo
MD PalyerNo
MD ChangerNo

OTHER
LSDNo
Front StabilizerStandart
Rear StablilizerStandart
Special EquipmentNo


- Present
- Option
- Not Present (or Dealer Option)



More photos Subaru Legacy


By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on April 20, 2024
πŸ“Œ Overview of the 1994-1996 Subaru Legacy 2.5 250T
πŸ“Œ Generations and Model Years
πŸ“Œ Trim Levels and Features
πŸ“Œ Engine Specifications and Power Output
πŸ“Œ Fuel Tank Capacity and Range
πŸ“Œ Fuel Consumption and Efficiency (MPG)
πŸ“Œ Dimensions and Sizes
πŸ“Œ Wheel Options and Tire Sizes
πŸ“Œ Performance and Acceleration
πŸ“Œ Safety Features and Ratings
πŸ“Œ Interior Amenities and Comfort
πŸ“Œ Exterior Design and Styling
πŸ“Œ Reliability and Maintenance
πŸ“Œ Available Upgrades and Accessories
πŸ“Œ Conclusion: The Legacy 2.5 250T - A Powerful and Efficient Choice
πŸ“Œ FAQ: Frequently Asked Questions about the 1994-Subaru Legacy 2.5 250T

Overview of the 1994-1996 Subaru Legacy 2.5 250T

The 1994-1996 Subaru Legacy 2.5 250T was a notable model within the Legacy lineup during that time period. With its impressive performance and reliable features, the Legacy 2.5 250T gained popularity among car enthusiasts.

This particular model was available in a sedan body type, providing a sleek and stylish design. The 2.5 250T complectation offered all-wheel drive (4WD) capability, ensuring excellent traction and stability on various road conditions.

Under the hood, the Legacy 2.5 250T housed a powerful 2.457cc (2.5L) engine with a displacement of 2457 cm3. This water-cooled, horizontally opposed 4-cylinder DOHC engine (EJ25) delivered a maximum power output of 162.2 PS (160 bhp) at 6000 rpm and a maximum torque of 210.8 Nm (155.5 lb-ft) at 2800 rpm. The engine was designed to run on high octane premium gasoline, providing optimal performance.

Equipped with a 4-speed automatic transmission (4AT), the Legacy 2.5 250T offered smooth and effortless gear shifts. The gear ratios were carefully tuned to deliver a balanced driving experience, with a 1st gear ratio of 2.785, 2nd gear ratio of 1.545, 3rd gear ratio of 1, 4th gear ratio of 0.694, and a rear gear ratio of 2.272.

When it came to size and dimensions, the Legacy 2.5 250T had an exterior length of 459.5 cm (180.9 inches), an exterior width of 169.5 cm (66.73 inches), and an exterior height of 140.5 cm (55.31 inches). The wheelbase measured 263 cm (103.54 inches), allowing for a stable and comfortable ride. With a weight of 1320 kg (2910 lbs), the Legacy 2.5 250T offered a balance of agility and solidity on the road.

Inside the cabin, this model comfortably accommodated five passengers across its four doors. The interior provided ample space, with an interior length of 201 cm (79.13 inches), an interior width of 141.5 cm (55.7 inches), and an interior height of 115.5 cm (45.47 inches). The Legacy 2.5 250T also featured power windows, power steering, a tachometer, centralized door lock, and keyless entry as standard amenities.

In terms of safety, the Legacy 2.5 250T came with front impact-absorbing structures and a robust frame to enhance passenger protection. It also featured a 3-point safety belt system, child car restraints, and additional stop lights for added safety on the road.

The Legacy 2.5 250T boasted a fuel tank capacity of 15.8 US gallons (60 liters), providing a decent range for long-distance journeys. Its fuel consumption was impressive, achieving approximately 23 mpg in the 10/15 mode or 27.6 mpg in the UK (10.2 L/100km). In the 60 km/h mode, the fuel consumption improved even further, reaching around 39.8 mpg in the US or 47.8 mpg in the UK (5.9 L/100km).

Overall, the 1994-1996 Subaru Legacy 2.5 250T presented a compelling package with its combination of performance, all-wheel drive capability, and comfortable features. It remains a sought-after model among those who appreciate a reliable and enjoyable driving experience.

Generations and Model Years

The 1994-1996 Subaru Legacy 2.5 250T belonged to the second generation of the Subaru Legacy model, which spanned from 1993 to 1998. This generation introduced several advancements and enhancements over its predecessor.

In terms of design, the second-generation Legacy featured a more refined and aerodynamic appearance. The 2.5 250T variant, specifically, showcased its sporty and elegant character through its sleek sedan body type.

During its production period from October 1994 to May 1996, the Legacy 2.5 250T gained recognition for its performance-oriented attributes. Equipped with a robust 2.457cc (2.5L) engine, this model delivered a remarkable power output of 162.2 PS (160 bhp) at 6000 rpm, providing a thrilling driving experience. The engine's technology and engineering contributed to its smooth and responsive performance.

The Legacy 2.5 250T incorporated a 4-speed automatic transmission (4AT) for seamless gear shifting. This transmission system allowed for effortless acceleration and efficient power distribution to all four wheels, thanks to the standard 4WD drivetrain.

Subaru's commitment to safety was evident in the second-generation Legacy, and the 2.5 250T benefited from various safety features. It featured front impact-absorbing structures, a durable frame, and a comprehensive safety belt system to enhance occupant protection.

The Legacy 2.5 250T was well-regarded for its spacious and comfortable interior. With seating capacity for five passengers and four doors for easy access, this model offered a pleasant and accommodating cabin environment. Standard amenities included power windows, power steering, a tachometer, centralized door lock, and keyless entry, ensuring convenience and comfort for occupants.

As part of the second-generation Legacy lineup, the 2.5 250T stood out as a notable variant known for its dynamic performance, all-wheel drive capability, and elegant design. Subaru's dedication to innovation and customer satisfaction was evident in the evolution of the Legacy series, with the 2.5 250T representing a remarkable chapter in the model's history.

Trim Levels and Features

The 1994-1996 Subaru Legacy 2.5 250T was available in several trim levels, each offering unique features and options to cater to different preferences and needs of drivers. Let's explore some of the trim levels and notable features of the Legacy 2.5 250T during that time:

1. Base Trim: The base trim of the Legacy 2.5 250T provided a solid foundation with a range of standard features. This included a powerful 2.5-liter engine, 4-speed automatic transmission, and Subaru's signature all-wheel drive (4WD) system for enhanced traction and stability. Power windows, power steering, centralized door lock, and keyless entry were among the convenience features available in the base trim.

2. Luxury Trim: The luxury trim of the Legacy 2.5 250T took comfort and convenience to the next level. In addition to the features found in the base trim, it offered upgraded amenities such as leather seats, providing a touch of elegance and sophistication. The luxury trim may have also included features like automatic climate control, a premium sound system, and enhanced interior trim finishes.

3. Sport Trim: The sport trim of the Legacy 2.5 250T targeted driving enthusiasts seeking a more dynamic and sporty experience. It could have featured sport-tuned suspension for improved handling and responsiveness. Exterior enhancements like aerodynamic body styling, alloy wheels, and fog lamps may have been included to amplify the sporty aesthetics of the vehicle.

4. Limited Trim: The limited trim of the Legacy 2.5 250T aimed to provide a higher level of refinement and luxury. It might have included features such as heated seats, power-adjustable seats, and a premium audio system. The limited trim may have also offered advanced safety features like airbags and traction control for added peace of mind.

5. Special Edition Trim: Subaru occasionally released special edition trims for specific model years. These trims could have included unique styling elements, exclusive paint options, and additional features not found in the standard trims. Special edition trims often appealed to collectors or individuals looking for a more distinctive and exclusive ownership experience.

It's important to note that the availability of specific features and trim levels may have varied based on the region and market. It's always advisable to refer to the manufacturer's specifications and local dealership information for the precise details of the trim levels and features offered for the 1994-1996 Subaru Legacy 2.5 250T.

Engine Specifications and Power Output

The 1994-1996 Subaru Legacy 2.5 250T was equipped with a powerful and capable engine, providing impressive performance for drivers. Let's delve into the engine specifications and power output of the Legacy 2.5 250T:

The heart of the Legacy 2.5 250T was a 2.457cc (2.5L) engine with the engine code EJ25. This water-cooled, horizontally opposed 4-cylinder DOHC engine was designed to deliver a balance of power and efficiency. With a displacement of 2457 cm3 (149.9 cu-in), the engine showcased Subaru's commitment to performance-oriented vehicles.

When it came to power output, the Legacy 2.5 250T demonstrated its capabilities. This model produced a maximum power of 162.2 PS (160 bhp) at 6000 rpm. The engine's power delivery was tuned to provide a responsive and engaging driving experience, ensuring ample acceleration and on-road performance.

Alongside its impressive power output, the Legacy 2.5 250T offered substantial torque for added driving pleasure. The maximum torque generated by the engine was 210.8 Nm (155.5 lb-ft) at 2800 rpm. This torque provided the necessary low-end grunt and mid-range power to tackle various driving conditions with ease.

The Legacy 2.5 250T's engine featured a compression ratio of 10, ensuring efficient combustion and maximizing power output. The bore of the engine measured 10 cm (3.93 inches), while the stroke was 7.9 cm (3.11 inches), indicating the engine's well-balanced design.

To optimize fuel efficiency and performance, the Legacy 2.5 250T utilized a fuel type of high octane premium gasoline. This fuel type complemented the engine's characteristics, allowing it to operate at its full potential.

The engine of the Legacy 2.5 250T was engineered to deliver a spirited and enjoyable driving experience. Whether navigating city streets or embarking on highway journeys, the Legacy 2.5 250T's engine provided ample power and performance to meet the demands of drivers seeking a dynamic and engaging ride.

Fuel Tank Capacity and Range

The 1994-1996 Subaru Legacy 2.5 250T offered a fuel tank capacity that provided a sufficient range for both daily commutes and longer journeys. Let's explore the fuel tank capacity and range of the Legacy 2.5 250T:

The fuel tank capacity of the Legacy 2.5 250T was approximately 15.8 US gallons (60 liters). This sizable fuel tank allowed drivers to go for extended distances without the need for frequent refueling stops.

With its fuel-efficient design and engine, the Legacy 2.5 250T could achieve a respectable range on a full tank of fuel. The actual range may vary depending on various factors such as driving conditions, driving style, and terrain. However, the Legacy 2.5 250T could cover a considerable distance before requiring a refill.

Drivers could expect the Legacy 2.5 250T to offer a practical range that allowed for comfortable and uninterrupted journeys. The range provided by the fuel tank capacity allowed drivers to enjoy longer road trips without frequent stops for refueling.

It's important to note that fuel consumption and range may also be influenced by factors such as traffic conditions, vehicle load, and individual driving habits. Additionally, fuel economy may differ between city and highway driving scenarios. Therefore, it's always advisable to refer to the manufacturer's specifications and perform real-world tests to determine the actual fuel consumption and range of the 1994-1996 Subaru Legacy 2.5 250T based on specific driving conditions and circumstances.

Overall, the Legacy 2.5 250T's fuel tank capacity and range provided drivers with the convenience and flexibility to embark on journeys with confidence, knowing that they could cover substantial distances before needing to refuel.

Fuel Consumption and Efficiency (MPG)

The 1994-1996 Subaru Legacy 2.5 250T offered fuel consumption figures that highlighted its efficiency and economy. Let's delve into the fuel consumption and efficiency of the Legacy 2.5 250T, measured in MPG (miles per gallon):

In the 10/15 mode, which represents a combination of city and highway driving, the Legacy 2.5 250T achieved an average fuel consumption of approximately 23 MPG in the United States or 27.6 MPG in the United Kingdom. These figures translated to around 10.2 liters per 100 kilometers.

For drivers seeking exceptional fuel efficiency, the Legacy 2.5 250T offered even better consumption figures in the 60 km/h mode. In this mode, which represented steady highway cruising, the Legacy 2.5 250T achieved an impressive fuel consumption of approximately 39.8 MPG in the United States or 47.8 MPG in the United Kingdom. This equated to roughly 5.9 liters per 100 kilometers.

It's important to note that fuel consumption can vary depending on various factors, including driving conditions, driving style, terrain, and vehicle load. The figures provided are general estimates and should serve as a guideline for the Legacy 2.5 250T's fuel efficiency.

Subaru's commitment to engineering fuel-efficient vehicles was evident in the Legacy 2.5 250T. The combination of an efficient engine, aerodynamic design, and advanced technologies contributed to its ability to deliver notable fuel efficiency figures. This allowed drivers to cover longer distances with fewer refueling stops, making it an economical choice for both daily commutes and extended road trips.

Actual fuel consumption may vary depending on individual driving habits and conditions. It's advisable to refer to the vehicle's specific model year and consult official manufacturer specifications or perform real-world tests to determine the precise fuel consumption of the 1994-1996 Subaru Legacy 2.5 250T based on specific driving scenarios.

Overall, the Legacy 2.5 250T's fuel consumption figures showcased its balance of performance and efficiency, providing drivers with a vehicle that delivered both power and economical operation.

Dimensions and Sizes

The 1994-1996 Subaru Legacy 2.5 250T boasted dimensions and sizes that contributed to its comfortable interior space and overall presence on the road. Let's explore the various dimensions and sizes of the Legacy 2.5 250T:

In terms of exterior dimensions, the Legacy 2.5 250T measured approximately 459.5 cm (180.9 inches) in length, 169.5 cm (66.73 inches) in width, and 140.5 cm (55.31 inches) in height. These measurements showcased the Legacy 2.5 250T's balanced proportions, providing a sleek and well-proportioned appearance.

Inside the cabin, the Legacy 2.5 250T offered ample space for occupants. The interior length measured around 201 cm (79.13 inches), providing generous legroom for both the front and rear passengers. The interior width was approximately 141.5 cm (55.7 inches), ensuring a comfortable seating arrangement. The interior height measured around 115.5 cm (45.47 inches), offering sufficient headroom for occupants.

The Legacy 2.5 250T featured a wheelbase of 263 cm (103.54 inches), providing stability and a smooth ride. The longer wheelbase contributed to enhanced handling and reduced cabin noise, creating a pleasant driving experience.

The front axle length was approximately 146.5 cm (57.67 inches), while the rear axle length measured around 145.5 cm (57.28 inches). These dimensions contributed to the Legacy 2.5 250T's well-balanced weight distribution, ensuring optimal handling and stability on the road.

With a minimum turning circle of 5.3 meters, the Legacy 2.5 250T offered maneuverability in various driving situations. This allowed drivers to navigate tight spaces and make U-turns with ease.

In terms of weight, the Legacy 2.5 250T had a weight of approximately 1320 kg (2910 lbs). This weight distribution, combined with the vehicle's overall dimensions and suspension setup, contributed to a balanced and controlled driving experience.

The Legacy 2.5 250T provided seating capacity for five passengers across its four doors. With a spacious interior and thoughtful dimensions, occupants could enjoy a comfortable journey, whether it was a short commute or a long-distance trip.

It's worth noting that the dimensions and sizes mentioned are approximate and may vary slightly based on the specific model year and regional variations of the 1994-1996 Subaru Legacy 2.5 250T.

Wheel Options and Tire Sizes

The 1994-1996 Subaru Legacy 2.5 250T offered various wheel options and tire sizes to cater to different preferences and driving needs. Let's explore the wheel options and tire sizes available for the Legacy 2.5 250T during that time:

The Legacy 2.5 250T typically featured 15-inch wheels, which provided a good balance of style and performance. These wheels were designed to complement the overall aesthetics of the vehicle and contribute to its confident stance on the road.

The tire sizes associated with the Legacy 2.5 250T were commonly 195/60 R15. The first number (195) represented the tire width in millimeters, while the second number (60) indicated the aspect ratio or the sidewall height as a percentage of the tire's width. The "R" denoted a radial tire construction, and the last number (15) represented the wheel diameter in inches.

The tire size of 195/60 R15 was selected to ensure a good balance between comfort, handling, and overall performance. It offered adequate grip and traction on various road surfaces, providing a smooth and controlled ride for the Legacy 2.5 250T.

It's important to note that tire sizes may vary based on individual preferences, regional variations, and optional upgrades. The tire specifications mentioned are common for the Legacy 2.5 250T during that time, but it's always advisable to consult the manufacturer's specifications or refer to the owner's manual for precise information regarding wheel options and tire sizes.

The choice of wheel options and tire sizes for the Legacy 2.5 250T allowed drivers to customize their vehicle's appearance and performance to align with their preferences. Whether seeking a balance of comfort and handling or a more dynamic driving experience, the Legacy 2.5 250T offered versatility in wheel and tire choices to suit individual tastes.

Performance and Acceleration

The 1994-1996 Subaru Legacy 2.5 250T showcased impressive performance and acceleration capabilities, making it a compelling choice for enthusiasts seeking a dynamic driving experience. Let's explore the performance attributes of the Legacy 2.5 250T:

Equipped with a robust 2.457cc (2.5L) engine, the Legacy 2.5 250T delivered a maximum power output of approximately 162.2 PS (160 bhp) at 6000 rpm. This power allowed for swift acceleration and confident overtaking on the road.

The Legacy 2.5 250T's engine was designed to provide responsive and exhilarating performance. The torque delivery was notable, with a maximum torque of approximately 210.8 Nm (155.5 lb-ft) at 2800 rpm. This torque ensured strong low-end and mid-range power, translating to quick acceleration and confident performance in various driving conditions.

The Legacy 2.5 250T utilized a 4-speed automatic transmission (4AT) that offered smooth and precise gear changes. This transmission setup enabled seamless power delivery to the wheels, enhancing acceleration and overall driving dynamics.

Thanks to its powerful engine and well-tuned transmission, the Legacy 2.5 250T could achieve satisfying acceleration times. While specific acceleration figures may vary based on factors such as road conditions and vehicle load, drivers could expect brisk acceleration from a standstill and ample passing power for highway maneuvers.

The Legacy 2.5 250T's performance was further enhanced by its all-wheel drive (4WD) system. This system provided optimal traction and stability, allowing the vehicle to effectively distribute power to all four wheels for improved grip and control. The 4WD capability contributed to confident and composed performance, especially in challenging weather or road conditions.

It's important to note that individual driving habits, environmental factors, and vehicle maintenance can influence the actual performance and acceleration of the Legacy 2.5 250T. Additionally, performance specifications may vary depending on the specific model year and regional variations of the vehicle.

Overall, the 1994-1996 Subaru Legacy 2.5 250T offered spirited performance and acceleration capabilities, delivering a dynamic and engaging driving experience for enthusiasts and drivers seeking a combination of power and versatility.

Safety Features and Ratings

The 1994-1996 Subaru Legacy 2.5 250T prioritized safety with a range of features designed to protect occupants and enhance overall safety performance. Let's explore the safety features and ratings of the Legacy 2.5 250T:

1. Front Impact-Absorbing Structures: The Legacy 2.5 250T incorporated front impact-absorbing structures, which were designed to absorb and distribute the energy of a frontal collision, helping to minimize the impact on occupants and reducing the risk of injury.

2. Durable Frame: The Legacy 2.5 250T featured a durable frame construction that enhanced the overall structural integrity of the vehicle. This reinforced frame contributed to occupant safety by providing increased protection during an impact.

3. Safety Belts: The Legacy 2.5 250T was equipped with a comprehensive safety belt system. This included three-point safety belts for all seating positions, ensuring that occupants were properly restrained in the event of a collision. Safety belt usage is a crucial element of occupant safety.

4. Side Impact Bar: The Legacy 2.5 250T featured side impact bars, which were designed to provide additional protection in the event of a side collision. These bars were positioned strategically within the doors to help absorb and dissipate energy from a side impact, reducing the risk of injury to occupants.

5. Child Car Restraints: The Legacy 2.5 250T included provisions for child car restraints, emphasizing the importance of child safety. These provisions allowed for the secure installation of child seats, ensuring the safety of younger passengers during travel.

6. Additional Stop Light: The Legacy 2.5 250T featured an additional stop light, which provided increased visibility to other drivers when braking. This feature helped to alert drivers behind the vehicle and reduce the risk of rear-end collisions.

It's important to note that safety ratings and features can vary based on specific model years and regional variations of the Legacy 2.5 250T. It's advisable to refer to official safety ratings from reputable organizations and consult the manufacturer's specifications for detailed information on safety features specific to the vehicle.

The safety features incorporated into the 1994-1996 Subaru Legacy 2.5 250T demonstrated Subaru's commitment to occupant safety. These features, combined with its robust construction and advanced safety technologies, aimed to provide drivers and passengers with peace of mind and confidence on the road.

Interior Amenities and Comfort

The 1994-1996 Subaru Legacy 2.5 250T offered a range of interior amenities and comfort features that aimed to enhance the overall driving experience for both the driver and passengers. Let's explore the interior amenities and comfort offerings of the Legacy 2.5 250T:

1. Power Windows: The Legacy 2.5 250T included power windows, allowing for convenient and effortless operation. With the touch of a button, occupants could easily control the opening and closing of the windows, enhancing comfort and ventilation.

2. Power Steering: Power steering was a standard feature in the Legacy 2.5 250T. This system made steering more responsive and effortless, providing a smooth and comfortable driving experience, particularly during low-speed maneuvers and tight turns.

3. Tachometer: The inclusion of a tachometer in the instrument cluster allowed the driver to monitor the engine's revolutions per minute (RPM). This information was valuable for maintaining optimal engine performance and ensuring smooth and efficient gear changes.

4. Centralized Door Lock: The Legacy 2.5 250T featured centralized door lock controls, providing convenient access to all doors with a single button press. This feature added convenience and security, allowing occupants to quickly and easily lock or unlock the vehicle.

5. Keyless Entry: Keyless entry was available in the Legacy 2.5 250T, allowing for effortless entry and exit from the vehicle. With the use of a remote key fob, occupants could unlock the doors without physically inserting the key, adding convenience and ease of use.

6. Adjustable Steering: The Legacy 2.5 250T offered an adjustable steering column, enabling drivers to customize the steering wheel position to their preferred comfort and driving style. This feature allowed for optimal ergonomics and enhanced driving comfort.

7. Tilt Steering: The tilt steering feature in the Legacy 2.5 250T provided further customization options for the steering wheel position. With the ability to adjust the tilt angle, drivers could find their desired steering wheel position for a comfortable and ergonomic driving experience.

8. Wood Panel: The Legacy 2.5 250T offered wood panel accents on the interior, adding a touch of sophistication and luxury. These wood trimmings enhanced the overall ambiance of the cabin and contributed to a refined interior atmosphere.

9. Cruise Control: Cruise control was available as an option in the Legacy 2.5 250T. This feature allowed drivers to set and maintain a desired speed for extended periods, reducing driver fatigue during long journeys and promoting a more relaxed driving experience.

10. Leather Seat (Option): For added luxury and comfort, the Legacy 2.5 250T offered the option of leather seats. Leather upholstery provided a premium look and feel, elevating the overall interior aesthetics and enhancing comfort for both the driver and passengers.

The interior amenities and comfort features of the 1994-1996 Subaru Legacy 2.5 250T aimed to create a pleasant and enjoyable driving environment. Whether it was the convenience of power windows, the comfort of adjustable steering, or the luxury of leather seats, the Legacy 2.5 250T prioritized occupant comfort and convenience.

Exterior Design and Styling

The 1994-1996 Subaru Legacy 2.5 250T boasted an exterior design and styling that captured attention and reflected Subaru's commitment to sleek and contemporary aesthetics. Let's explore the exterior design elements and styling features of the Legacy 2.5 250T:

1. Sleek Lines: The Legacy 2.5 250T featured clean and sleek lines that contributed to its modern and timeless appeal. The flowing contours of the body accentuated the vehicle's aerodynamic profile, reducing drag and enhancing efficiency.

2. Balanced Proportions: With its well-balanced proportions, the Legacy 2.5 250T presented a harmonious and visually pleasing stance. The carefully considered dimensions and proportions emphasized the vehicle's sporty character while providing ample interior space for occupants.

3. Aerodynamic Features: The Legacy 2.5 250T incorporated aerodynamic features, such as subtle spoilers and sculpted body panels. These elements not only enhanced the vehicle's overall visual appeal but also improved aerodynamic performance, resulting in reduced wind noise and improved fuel efficiency.

4. Distinctive Front Fascia: The Legacy 2.5 250T featured a distinctive front fascia that showcased Subaru's signature grille design. The grille, flanked by stylish headlights, created a bold and assertive front-end appearance, leaving a lasting impression on onlookers.

5. Refined Rear Design: The rear design of the Legacy 2.5 250T exuded sophistication and elegance. The sleek taillights seamlessly integrated into the rear quarter panels, contributing to a cohesive and refined overall aesthetic.

6. Integrated Bumpers: The Legacy 2.5 250T incorporated integrated bumpers that seamlessly blended with the vehicle's bodywork. This design choice added to the vehicle's polished and cohesive appearance while providing protection and enhancing safety.

7. Wheel Options: The Legacy 2.5 250T offered a selection of wheel options that complemented its overall design. These wheels varied in design and finish, allowing drivers to personalize their vehicle's exterior appearance and further enhance its visual appeal.

8. Paint Color Choices: The Legacy 2.5 250T was available in a range of paint color options, providing owners with the opportunity to select a hue that matched their personal style. These color choices ranged from classic neutrals to vibrant shades, allowing for individual expression.

The exterior design and styling of the 1994-1996 Subaru Legacy 2.5 250T combined form and function, resulting in a visually appealing and aerodynamically efficient vehicle. With its sleek lines, balanced proportions, and attention to detail, the Legacy 2.5 250T showcased Subaru's commitment to creating vehicles that were not only pleasing to the eye but also offered exceptional performance and practicality.

Reliability and Maintenance

The 1994-1996 Subaru Legacy 2.5 250T demonstrated reliability and required regular maintenance to ensure its optimal performance and longevity. Let's explore the reliability and maintenance aspects of the Legacy 2.5 250T:

1. Build Quality: The Legacy 2.5 250T was constructed with attention to detail and a focus on durability. Subaru's commitment to quality craftsmanship and robust engineering contributed to the vehicle's overall reliability.

2. Regular Maintenance: Like any vehicle, the Legacy 2.5 250T required routine maintenance to keep it in top condition. Regular maintenance tasks included oil changes, filter replacements, and fluid inspections, among others. Following the recommended maintenance schedule outlined in the owner's manual was crucial in maintaining the vehicle's reliability.

3. Engine Performance: The Legacy 2.5 250T featured a well-engineered engine that, with proper maintenance, offered reliable performance. Regular engine inspections, such as checking the belts, hoses, and fluid levels, were essential to ensure the engine operated smoothly and efficiently.

4. Suspension and Brake System: The Legacy 2.5 250T's suspension and brake systems played vital roles in ensuring safety and reliability. Regular inspections of these components, including checking for signs of wear, were necessary to maintain optimal performance and address any issues promptly.

5. Electrical System: The Legacy 2.5 250T's electrical system, encompassing components such as the battery, alternator, and wiring, required periodic checks to ensure reliability. Monitoring the battery's charge, inspecting the electrical connections, and addressing any electrical issues promptly were crucial to maintaining the vehicle's electrical reliability.

6. Rust Prevention: Given the age of the vehicle, it was essential to prioritize rust prevention measures. Regular cleaning, waxing, and rust-proofing procedures helped protect the vehicle's exterior from rust and corrosion, contributing to its overall reliability and longevity.

7. Genuine Parts and Service: Using genuine Subaru parts and seeking professional service from authorized Subaru dealerships or trusted mechanics was recommended for maintaining the Legacy 2.5 250T's reliability. Genuine parts and expertise ensured proper fitment and quality, helping to preserve the vehicle's reliability and performance.

8. Owner Care and Driving Habits: Owners' care and responsible driving habits also influenced the reliability of the Legacy 2.5 250T. Regularly checking fluid levels, monitoring warning lights, and driving responsibly by following speed limits and avoiding harsh driving practices contributed to the vehicle's long-term reliability.

It's important to note that individual driving conditions and maintenance practices could impact the vehicle's reliability. Adhering to the manufacturer's recommended maintenance schedule and promptly addressing any issues or concerns were crucial in ensuring the Legacy 2.5 250T remained reliable throughout its ownership.

Overall, the 1994-1996 Subaru Legacy 2.5 250T exhibited reliability when properly maintained. By following routine maintenance procedures, seeking professional assistance when needed, and adopting responsible driving habits, owners could maximize the vehicle's reliability and enjoy its performance for years to come.

Available Upgrades and Accessories

The 1994-1996 Subaru Legacy 2.5 250T offered a range of available upgrades and accessories to allow owners to personalize their driving experience and enhance the vehicle's functionality. Let's explore some of the upgrades and accessories that were available for the Legacy 2.5 250T:

1. Audio System Upgrades: Owners had the option to upgrade the audio system in the Legacy 2.5 250T to enhance their in-car entertainment experience. Upgrades could include higher-quality speakers, subwoofers, or even a premium sound system, providing improved audio clarity and immersive sound.

2. Security Systems: Additional security systems, such as car alarms or immobilizers, could be installed to enhance the vehicle's security and protect against theft or unauthorized access. These upgrades added an extra layer of security and peace of mind for owners.

3. Roof Racks: For increased storage capacity, roof racks were available as an accessory for the Legacy 2.5 250T. These racks allowed owners to transport bulky items, such as bicycles or luggage, conveniently and securely, expanding the vehicle's utility.

4. All-Weather Floor Mats: All-weather floor mats were a popular accessory choice for the Legacy 2.5 250T. Designed to protect the vehicle's carpeting from dirt, mud, and spills, these durable mats were easy to clean and helped maintain a neat and well-maintained interior.

5. Cargo Organizers: Cargo organizers, including trunk trays or cargo nets, offered practical solutions for keeping items secure and organized in the trunk area. These accessories prevented items from sliding around during transit, maximizing cargo space utility.

6. Window Visors: Window visors, also known as rain guards or wind deflectors, were available to enhance the Legacy 2.5 250T's exterior aesthetics and functionality. These accessories provided protection against rain while allowing fresh air circulation into the cabin, reducing wind noise and enhancing comfort during inclement weather.

7. Exterior Styling Enhancements: Owners had the option to customize the exterior appearance of the Legacy 2.5 250T with various styling enhancements. These could include front or rear spoilers, side skirts, or chrome trim accents, allowing owners to add a personal touch and enhance the vehicle's overall look.

8. Performance Upgrades: Enthusiasts could explore performance upgrades for the Legacy 2.5 250T, such as aftermarket exhaust systems, cold air intakes, or suspension enhancements. These upgrades aimed to improve the vehicle's power, handling, and overall performance, catering to those seeking a more spirited driving experience.

It's important to note that the availability of specific upgrades and accessories may vary based on regional offerings and individual preferences. Consulting with authorized Subaru dealerships or trusted aftermarket suppliers would provide owners with a comprehensive list of available upgrades and accessories tailored to the Legacy 2.5 250T.

The range of available upgrades and accessories for the 1994-1996 Subaru Legacy 2.5 250T allowed owners to customize their vehicle according to their needs, preferences, and personal style. Whether it was improving audio quality, enhancing security features, or adding practical utility, these upgrades and accessories offered versatility and individualization for a truly personalized driving experience.

Conclusion: The Legacy 2.5 250T - A Powerful and Efficient Choice

The 1994-1996 Subaru Legacy 2.5 250T presented a compelling package of power, efficiency, and versatility. With its robust 2.5L engine and all-wheel drive capability, the Legacy 2.5 250T offered a combination of performance and handling that appealed to driving enthusiasts. The vehicle's 4-speed automatic transmission ensured smooth and precise gear changes, further enhancing the overall driving experience.

In terms of efficiency, the Legacy 2.5 250T showcased impressive fuel consumption figures. With its high octane premium gasoline requirement and efficient engine design, the vehicle achieved respectable fuel economy both in city driving and on the highway, providing owners with a balance of power and efficiency.

The Legacy 2.5 250T also excelled in safety, featuring front impact-absorbing structures, side impact bars, and a durable frame that enhanced occupant protection. With its comprehensive safety belt system and child car restraint provisions, the Legacy 2.5 250T prioritized the safety of its occupants.

Inside the cabin, the Legacy 2.5 250T offered a range of amenities and comfort features. From power windows and power steering to adjustable steering and wood panel accents, the vehicle provided a pleasant and convenient driving environment. Optional upgrades, such as leather seats and a cruise control system, allowed owners to further enhance their comfort and driving experience.

The Legacy 2.5 250T's exterior design showcased sleek lines, balanced proportions, and aerodynamic features that contributed to its modern and timeless appeal. With a range of available upgrades and accessories, owners could personalize their vehicle to suit their individual preferences and needs, adding practicality and style.

Reliability and maintenance were important considerations for the Legacy 2.5 250T. Following the recommended maintenance schedule and utilizing genuine parts and service ensured the vehicle's reliability and longevity. With proper care and responsible driving habits, owners could enjoy the Legacy 2.5 250T's performance and functionality for years to come.

Overall, the 1994-1996 Subaru Legacy 2.5 250T presented a compelling choice for those seeking a powerful and efficient vehicle. With its performance capabilities, safety features, comfort amenities, and customization options, the Legacy 2.5 250T provided a well-rounded driving experience that combined power, efficiency, and versatility.

FAQ: Frequently Asked Questions about the 1994-1996 Subaru Legacy 2.5 250T

What is the production period of the 1994-1996 Subaru Legacy 2.5 250T?

The 1994-1996 Subaru Legacy 2.5 250T was produced from October 1994 to May 1996.

What is the body type of the 1994-1996 Subaru Legacy 2.5 250T?

The 1994-1996 Subaru Legacy 2.5 250T is a sedan.

What is the drivetrain of the 1994-1996 Subaru Legacy 2.5 250T?

The 1994-1996 Subaru Legacy 2.5 250T features a 4-wheel drive (4WD) drivetrain.

What are the transmission options available for the 1994-1996 Subaru Legacy 2.5 250T?

The 1994-1996 Subaru Legacy 2.5 250T is equipped with a 4-speed automatic transmission.

What is the engine capacity of the 1994-1996 Subaru Legacy 2.5 250T?

The 1994-1996 Subaru Legacy 2.5 250T has an engine displacement of 2457 cm3 or 149.9 cu-in.

What is the frame name of the 1994-1996 Subaru Legacy 2.5 250T?

The 1994-1996 Subaru Legacy 2.5 250T belongs to the E-BD9 frame.

What was the price of a new 1994-1996 Subaru Legacy 2.5 250T in Tokyo, Yen?

The price of a new 1994-1996 Subaru Legacy 2.5 250T in Tokyo, Japan was 2,547,000 yen.

How long is the exterior length of the 1994-1996 Subaru Legacy 2.5 250T?

The exterior length of the 1994-1996 Subaru Legacy 2.5 250T measures 459.5 cm or 180.9 inches.

What is the interior width of the 1994-1996 Subaru Legacy 2.5 250T?

The interior width of the 1994-1996 Subaru Legacy 2.5 250T is approximately 141.5 cm or 55.7 inches.

How many seats does the 1994-1996 Subaru Legacy 2.5 250T have?

The 1994-1996 Subaru Legacy 2.5 250T has seating for five occupants.

What is the engine code of the 1994-1996 Subaru Legacy 2.5 250T?

The engine code for the 1994-1996 Subaru Legacy 2.5 250T is EJ25.

What is the maximum power output of the 1994-1996 Subaru Legacy 2.5 250T?

The 1994-1996 Subaru Legacy 2.5 250T produces a maximum power output of 162.2 PS or 160 bhp or 119.3 kW.

What is the maximum torque of the 1994-1996 Subaru Legacy 2.5 250T?

The 1994-1996 Subaru Legacy 2.5 250T generates a maximum torque of 210.8 Nm or 155.5 lb-ft or 21.5 kg-m.

What is the fuel type recommended for the 1994-1996 Subaru Legacy 2.5 250T?

The 1994-1996 Subaru Legacy 2.5 250T requires high octane premium gasoline.

What is the fuel consumption of the 1994-1996 Subaru Legacy 2.5 250T in city driving?

The fuel consumption of the 1994-1996 Subaru Legacy 2.5 250T in city driving is approximately 23 mpg (US), 27.6 mpg (UK), or 10.2 L/100km.

What is the compression ratio of the 1994-1996 Subaru Legacy 2.5 250T?

The 1994-1996 Subaru Legacy 2.5 250T has a compression ratio of 10.

What are the front brake options for the 1994-1996 Subaru Legacy 2.5 250T?

The 1994-1996 Subaru Legacy 2.5 250T is equipped with ventilated disc brakes at the front.

Are there any additional safety features in the 1994-1996 Subaru Legacy 2.5 250T?

The 1994-1996 Subaru Legacy 2.5 250T includes side impact bars to enhance occupant protection in the event of a collision.

Can I add a cruise control system to the 1994-1996 Subaru Legacy 2.5 250T?

Yes, a cruise control system is available as an optional upgrade for the 1994-1996 Subaru Legacy 2.5 250T.

What are the available exterior color options for the 1994-1996 Subaru Legacy 2.5 250T?

The 1994-1996 Subaru Legacy 2.5 250T was offered in a range of exterior color options, including neutrals and vibrant shades.


Brian Wong - Senior Reviews Editor of cars-directory.net

Brian Wong / Author

Brian Wong is an accomplished automotive journalist and editor with a passion for cars. With over a decade of experience in the industry, he has established himself as a trusted voice in the automotive community. Brian has written extensively about a wide range of topics in the field, from the latest trends in car design to innovative safety features and emerging technologies. As a senior reviews editor, he is responsible for test driving and analyzing the latest cars on the market, providing readers with accurate and objective reviews. His articles are widely read and respected for their depth of knowledge and analysis. Brian is committed to staying at the forefront of the latest developments in the automotive industry, and is dedicated to sharing his expertise and insights with his readers.

Add Comment

 * - The field should be filled
* Your Name:
 Contact (e-mail, phone...):
* Comments:
Photos: