1997 Subaru Legacy Wagon 2.5 250T air suspension 4WD Specs


OVERVIEW

With a fuel consumption of 25 mpg US - 30 mpg UK - 9.4 L/100km, a curb weight of 3714 lbs (1685 kg), the Subaru Legacy Wagon 2.5 250T air suspension 4WD has a horizontal opposite 4 cylinder DOHC engine, a High octane premium gasoline engine EJ25. This engine EJ25 produces a maximum power of 177.4 PS (175 bhp - 130.4 kW) at 6000 rpm and a maximum torque of 230.4 Nm (169.9 lb.ft - 23.5 kg.m) at 3800 rpm. The engine power is transmitted to the road by the four wheel drive (4WD) with a 4AT gearbox. For stopping power, the Subaru Legacy Wagon 2.5 250T air suspension 4WD braking system includes V disk at the rear and V disk at the front. Stock tire sizes are 195/60 on 15 inch rims at the rear and 195/60 on 15 inch rims at the front. Chassis details - Subaru Legacy Wagon 2.5 250T air suspension 4WD has strut rear suspension and strut front suspension for road holding and ride confort.

Add to compare list

GENERAL INFORMATION
Period of ProductionSep 1997 - May 1998
Drive Wheels - Traction - Drivetrain4WD
Transmission Gearbox - Number of Speeds4AT
Engine Size - Displacement - Engine Capacity2457 cm3 or 149.9 cu-in
Frame NameE-BGC

SUBARU LEGACY WAGON 2.5 250T AIR SUSPENSION 4WD SIZE, DIMENSIONS AND WEIGHT
Exterior Length468 cm or 184.25 inches
Exterior Width169.5 cm or 66.73 inches
Exterior Height149 cm or 58.66 inches
Exterior Size (L x W x H)468x169.5x149 cm or 184.25x66.73x58.66 inches
Interior Length195.5 cm or 76.96 inches
Interior Width141.5 cm or 55.7 inches
Interior Height119 cm or 46.85 inches
Interior Size (L x W x H)195.5x141.5x119 cm or 76.96x55.7x46.85 inches
Wheelbase263 cm or 103.54 inches
Front Axle Length146 cm or 57.48 inches
Rear Axle Length145.5 cm or 57.28 inches
Ride Height - Ground Clearance16.5 cm or 6.49 inches
Weight1410 kg or 3108 lbs
Num. of Seats5
Num. of Doors5
Minimum Turning Circle - Turning Diameter, m5.3
Fuel Tank Capacity15.8 US gallons
13.1 UK gallons
60 L
Curb Weight1685 kg or 3714 lbs
Seat Rows2
Front/Rear Axis Length146/145.5 cm or 57.48/57.28 inches

SUBARU LEGACY WAGON 2.5 250T AIR SUSPENSION 4WD ENGINE TECHNICAL DATA
Engine CodeEJ25
Maximum Power - Output - Horsepower177.4 PS or 175 bhp or 130.4 kW
Maximum Power RPM6000 rpm
Maximum Torque230.4 Nm or 169.9 lb.ft or 23.5 kg.m
Maximum Torque RPM3800 rpm
Engine Type - Number of Cylindershorizontal opposite 4 cylinder DOHC
Fuel TypeHigh octane premium gasoline
Fuel Consumption (10/15 mode)25 mpg US
30 mpg UK
9.4 L/100km
Variable Cylinder Management - VCMNo

SUBARU LEGACY WAGON 2.5 250T AIR SUSPENSION 4WD SUSPENSION
Front Brakes - Disc DimensionsV disk
Rear Brakes - Disс DimensionsV disk
Front Suspensionstrut
Rear Suspensionstrut
Front Tyres - Rims Dimensions195/60 R15
Rear Tyres - Rims Dimensions195/60 R15
Aluminium DiskStandart
4WS - Four-Wheel SteeringNo
Variable Gear Ratio Steering - VGS/VGRSNo
Sport-Tuned SuspensionNo
Low Down SuspensionNo

SUBARU LEGACY WAGON 2.5 250T AIR SUSPENSION 4WD EXTERIOR
SunroofOption
Front SpoilerNo
Rear SpoilerNo
Xenon LampsNo
Front Fog LampsStandart
Rear Fog LampsNo
Ultraviolet Glass ProtectionNo
Roof RailStandart
Big SunroofNo
T Bar RoofNo
Roof EquipmentNo
Targa RoofNo
Hard TopNo
Soft Topno
Canvas Topno
Metal Top-
Magnesium WheelsNo
Side Sliding DoorNo
Sliding DoorsNo
Sliding Electric DoorNo
Sliding Electric DoorsNo
Door Easy CloserNo
Power Rear DoorNo
Head Lights WasherNo
Privacy GlassNo
Winter ComplectationNo

SUBARU LEGACY WAGON 2.5 250T AIR SUSPENSION 4WD INTERIOR
Power WindowStandart
Power SteeringStandart
Keyless EnterStandart
Cruise ControlOption
Leather SeatNo
Power Adjustable SeatsNo
Front Seat HeaterOption
Power Ajustable Front SeatNo
Removable SeatsNo
Shifter Positionfloor
Steering Locatonright
Steereing Gear Typerack & pinion type with power assist
Ottoman SeatNo
Front Bench SeatNo
Full Flat Seats-
Seat Position MemoryNo
Seat LifterNo
Adjustable 3rd RowNo
Walk Throught-
2nd Row Throught-
2nd Rowseparate folding
3nd Row-
Lagage BoxNo
Engine Start ButtonNo
EtcNo
Bucket SeatNo

SUBARU LEGACY WAGON 2.5 250T AIR SUSPENSION 4WD SAFETY
Drivers AirbagStandart
Passengers AirbagOption
Side AirbagOption
ABSABS( standard )
Break AssistNo
Parking RadarNo
Curtain AirbagsNo
2 AirbagsNo
Front MonitorNo
Sides MonitorsNo
Back MonitorNo
Active HeadrestNo
Start Stop SystemNo
Run Flat TiresNo
Air SuspensionStandart
Brakes Equipmentno
Collision Mitigation SystemNo
Night VisionNo
Lane Keep AssistNo
Distance Control SystemNo
SonarNo
Cenral Diff LockNo
ESCNo
Traction ControlNo
Down Hill AssistNo
AYCNo
SH-4WDNo
Isofix BarNo
Build-in Child SeatNo
Autocorrected MirrorsNo
Rain SensorNo
Intelligent AFSNo
Alarm SystemNo
Security AlarmNo
Road Service-

AMENITY
Air Conditionerautoair conditioning(standard)
Air PurifierNo
RadioStandart
Autoreverse CasetteStandart
CD PlayerStandart
MD PalyerNo
Navigation System-
Mesomorphic Monitor-
Traffic Jam Assist-
Audio HDDNo
DVD-audioNo
Additional Sound Equipment-
Rear Entertainment SystemNo
SpeakerStandart
AC PlugNo
Stearing Wheel HeaterNo
Rear Seats HeaterNo
HumidifierNo
Air FilterNo
Antibacterial FilterNo
Оdor AbsorberNo
DehumidifierNo
Intelligent Parking AssistNo
Optional Navigation SystemNo

OTHER
LSDNo


- Present
- Option
- Not Present (or Dealer Option)



More photos Subaru Legacy Wagon


By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on April 24, 2024
πŸ“Œ Overview of the 1997-1998 Subaru Legacy Wagon 2.5 250T
πŸ“Œ Dimensions and Sizes
πŸ“Œ Engine Specifications
πŸ“Œ Fuel Tank Capacity
πŸ“Œ Fuel Consumption and MPG
πŸ“Œ Air Suspension System
πŸ“Œ 4WD Capability
πŸ“Œ Wheel Specifications
πŸ“Œ Trim Levels and Options
πŸ“Œ Conclusion
πŸ“Œ Frequently Asked Questions (FAQ) about the 1997-Subaru Legacy Wagon 2.5 250T with Air Suspension and 4WD

Overview of the 1997-1998 Subaru Legacy Wagon 2.5 250T

The 1997-1998 Subaru Legacy Wagon 2.5 250T with air suspension and 4WD was produced from September 1997 to May 1998. It offered a combination of versatility and performance, making it a popular choice among drivers during that period.

This Legacy Wagon boasted a 2457 cm3 (149.9 cu-in) engine, with a power output of 177.4 PS (175 bhp) or 130.4 kW at 6000 rpm. The engine code for this model was EJ25, and it featured a horizontal opposite 4-cylinder DOHC configuration. The maximum torque generated was 230.4 Nm (169.9 lb.ft) at 3800 rpm. The transmission gearbox had 4 speeds, providing smooth and efficient shifting.

In terms of size and dimensions, the exterior of the Legacy Wagon measured 468 cm (184.25 inches) in length, 169.5 cm (66.73 inches) in width, and 149 cm (58.66 inches) in height. The interior offered comfortable seating for five passengers, with an interior length of 195.5 cm (76.96 inches), width of 141.5 cm (55.7 inches), and height of 119 cm (46.85 inches).

The car featured a 4WD drivetrain, ensuring enhanced traction and stability, especially in challenging road conditions. With its 15.8 US gallon (60 L) fuel tank capacity, the Legacy Wagon provided a decent range for extended journeys.

Equipped with air suspension, this Subaru model delivered a comfortable and smooth ride, absorbing road imperfections effectively. The suspension setup consisted of struts on both the front and rear, contributing to the car's overall stability and handling.

Safety features included a driver's airbag as a standard offering, while passenger and side airbags were available as optional additions. The car also featured ABS (anti-lock braking system) for improved braking control.

The Legacy Wagon 2.5 250T came with standard amenities such as auto air conditioning, a radio, CD player, and speakers. Optional features included front seat heaters and cruise control, enhancing driver comfort and convenience.

With its distinct combination of practicality, performance, and safety features, the 1997-1998 Subaru Legacy Wagon 2.5 250T with air suspension and 4WD was a reliable and sought-after choice for those in search of a versatile and capable vehicle during that time.

Dimensions and Sizes

The 1997-1998 Subaru Legacy Wagon 2.5 250T with air suspension and 4WD exhibited a size and dimensions that catered to practicality and spaciousness. With its well-designed exterior and thoughtfully crafted interior, this wagon offered ample space for both passengers and cargo.

Measuring 468 cm (184.25 inches) in length, 169.5 cm (66.73 inches) in width, and 149 cm (58.66 inches) in height, the Legacy Wagon presented a balanced and proportionate exterior profile. These dimensions provided a spacious cabin and contributed to the car's overall stability and handling.

Inside the vehicle, the Legacy Wagon 2.5 250T offered comfortable seating for five passengers. The interior length measured 195.5 cm (76.96 inches), while the width spanned 141.5 cm (55.7 inches). The height of the cabin stood at 119 cm (46.85 inches), ensuring sufficient headroom for occupants.

The wheelbase of the vehicle measured 263 cm (103.54 inches), contributing to stability and smooth handling. The front axle length was 146 cm (57.48 inches), while the rear axle length was 145.5 cm (57.28 inches), emphasizing a balanced weight distribution.

With a minimum turning circle of 5.3 meters, the Legacy Wagon provided maneuverability in various driving situations, making it suitable for both urban and suburban environments.

The car boasted a ride height of 16.5 cm (6.49 inches), ensuring ample ground clearance to navigate uneven surfaces and obstacles without compromising comfort.

In terms of weight, the Legacy Wagon had a curb weight of 1685 kg (3714 lbs), making it a solid and sturdy vehicle. Its weight distribution and well-engineered suspension system contributed to a balanced and stable ride.

The fuel tank capacity was 15.8 US gallons (60 L), providing a decent range for extended journeys without the need for frequent refueling.

With its spacious interior, well-thought-out dimensions, and balanced weight distribution, the 1997-1998 Subaru Legacy Wagon 2.5 250T with air suspension and 4WD offered a comfortable and practical driving experience for both passengers and cargo.

Engine Specifications

The 1997-1998 Subaru Legacy Wagon 2.5 250T with air suspension and 4WD was equipped with an impressive engine that delivered both power and reliability. The engine specifications of this model contributed to its performance and overall driving experience.

Under the hood, the Legacy Wagon 2.5 250T housed a 2457 cm3 (149.9 cu-in) engine. This engine featured a displacement of 2457 cm3, providing ample power for various driving situations. The engine type was a horizontal opposite 4-cylinder DOHC configuration, known for its smooth operation and balanced performance.

The engine code for this model was EJ25, highlighting its specific designation within the Subaru engine lineup. The EJ25 engine was renowned for its durability and responsiveness, making it a popular choice among Subaru enthusiasts.

The 1997-1998 Legacy Wagon 2.5 250T engine produced a maximum power output of 177.4 PS (175 bhp) or 130.4 kW at 6000 rpm. This power allowed for confident acceleration and highway cruising capabilities.

When it came to torque, the engine generated a maximum of 230.4 Nm (169.9 lb.ft) at 3800 rpm. This torque output contributed to the car's overall performance, ensuring responsive acceleration and pulling power.

The fuel type recommended for this model was high octane premium gasoline. Using the appropriate fuel grade helped optimize the engine's performance and efficiency.

Fuel consumption figures for the Legacy Wagon 2.5 250T indicated a rating of 25 mpg US or 30 mpg UK, equivalent to 9.4 L/100km in the 10/15 mode. These figures provided a balance between performance and fuel efficiency, making it a practical choice for daily commuting and longer trips.

Overall, the engine specifications of the 1997-1998 Subaru Legacy Wagon 2.5 250T with air suspension and 4WD showcased its capabilities in delivering a dynamic and enjoyable driving experience.

Fuel Tank Capacity

The fuel tank capacity of the 1997-1998 Subaru Legacy Wagon 2.5 250T with air suspension and 4WD played a crucial role in determining its range and fuel efficiency. The generous fuel tank capacity allowed for longer journeys without the need for frequent refueling stops.

This Subaru Legacy Wagon had a fuel tank capacity of 15.8 US gallons or 60 liters. With this capacity, the vehicle could store a significant amount of fuel, ensuring that drivers had sufficient range for their travels.

The fuel tank capacity of 15.8 US gallons (60 liters) provided a balance between capacity and weight. It allowed the Legacy Wagon 2.5 250T to carry an adequate fuel supply without compromising handling or performance.

The spacious fuel tank capacity of the Legacy Wagon 2.5 250T provided convenience and peace of mind, particularly during long trips or when driving in areas with limited access to fuel stations.

By offering a sizable fuel tank capacity, the 1997-1998 Subaru Legacy Wagon 2.5 250T with air suspension and 4WD ensured that drivers could enjoy extended journeys without the constant need for refueling, enhancing the overall convenience and practicality of the vehicle.

Fuel Consumption and MPG

The fuel consumption and MPG (miles per gallon) figures of the 1997-1998 Subaru Legacy Wagon 2.5 250T with air suspension and 4WD provided valuable information about its efficiency and cost-effectiveness. These figures were crucial in assessing the vehicle's fuel efficiency and its impact on overall running costs.

In the 10/15 mode, the Legacy Wagon 2.5 250T achieved a fuel consumption rating of 25 mpg (US) or 30 mpg (UK). This figure represented the average fuel consumption under a specific test cycle, combining city and highway driving conditions.

Translating this fuel consumption figure into liters per 100 kilometers, the Legacy Wagon 2.5 250T achieved a rate of 9.4 L/100km. This conversion allowed for a comparison of fuel efficiency standards used in different regions.

The fuel consumption figures indicated that the Legacy Wagon 2.5 250T offered a balance between performance and efficiency. Its fuel consumption rates were competitive for a vehicle of its size and capabilities, making it a practical choice for daily commuting and longer journeys.

Achieving a respectable fuel efficiency, the Legacy Wagon 2.5 250T helped reduce fuel expenses and minimize environmental impact. It provided an optimal balance between power and economy, ensuring that drivers could enjoy a satisfying driving experience while being mindful of fuel consumption.

The fuel consumption and MPG figures of the 1997-1998 Subaru Legacy Wagon 2.5 250T with air suspension and 4WD showcased its efficiency and its ability to strike a balance between performance and fuel economy.

Air Suspension System

The 1997-1998 Subaru Legacy Wagon 2.5 250T with air suspension and 4WD featured an advanced air suspension system that enhanced its ride comfort and handling capabilities. The air suspension system utilized air springs to provide a smooth and controlled driving experience.

With the air suspension system, the Legacy Wagon 2.5 250T was able to adjust its ride height and stiffness according to driving conditions and passenger load. This allowed for a customizable driving experience, optimizing comfort and stability.

The air suspension system worked by adjusting the air pressure in the air springs. When driving over uneven surfaces or encountering road imperfections, the system automatically adjusted the air pressure to provide a cushioning effect, minimizing vibrations and impact felt within the cabin.

The air suspension system contributed to the overall stability and handling of the Legacy Wagon. It improved traction by keeping the vehicle's wheels in contact with the road surface, even under varying load conditions. This enhanced the car's capability to tackle different terrains and provided a confident driving experience.

The air suspension system of the Legacy Wagon 2.5 250T also offered the advantage of adjustable ride height. This allowed the driver to raise or lower the vehicle's height, providing flexibility for different driving situations or personal preferences.

By utilizing an air suspension system, the Legacy Wagon 2.5 250T prioritized ride comfort and handling, delivering a smooth and controlled driving experience. The system's ability to adapt to varying road conditions and passenger loads contributed to the overall driving enjoyment and made the Legacy Wagon an attractive choice for those seeking a comfortable and capable vehicle.

4WD Capability

The 1997-1998 Subaru Legacy Wagon 2.5 250T with air suspension and 4WD offered impressive 4WD (four-wheel drive) capability, enhancing its performance and traction in various driving conditions. The 4WD system provided increased stability and control, making it suitable for both on-road and off-road adventures.

The 4WD capability of the Legacy Wagon 2.5 250T distributed power to all four wheels, ensuring improved traction and grip on slippery or uneven surfaces. This feature greatly enhanced the vehicle's ability to navigate challenging terrains, such as snowy or muddy roads, as well as off-road trails.

The 4WD system in the Legacy Wagon 2.5 250T utilized a sophisticated drivetrain and differential setup. Power was distributed between the front and rear wheels, adjusting the torque distribution based on wheel slip and traction demands. This intelligent system provided optimal power transfer to maximize grip and stability.

The 4WD capability of the Legacy Wagon 2.5 250T was particularly beneficial in adverse weather conditions, offering enhanced control and confidence during rain, snow, or icy conditions. It provided a stable and secure driving experience, reducing the risk of wheel slippage and improving overall safety.

With its 4WD system, the Legacy Wagon 2.5 250T demonstrated its versatility and capability, making it a suitable choice for drivers who needed a reliable vehicle with superior traction and control. Whether navigating city streets or exploring rugged terrains, the 4WD capability of the Legacy Wagon ensured a confident and enjoyable driving experience.

Wheel Specifications

The 1997-1998 Subaru Legacy Wagon 2.5 250T with air suspension and 4WD came equipped with specific wheel specifications that contributed to its overall performance and aesthetics. The wheels of the Legacy Wagon were designed to provide a balance of style, functionality, and stability.

The front and rear wheels of the Legacy Wagon 2.5 250T featured the same dimensions. The tire size for both the front and rear wheels was 195/60 R15, emphasizing a balance between grip, comfort, and handling.

The 15-inch wheel size provided a good combination of maneuverability and stability. It allowed for precise steering response while ensuring a comfortable ride over different road surfaces. The specific rim dimensions for these wheels were not provided in the available information.

The use of standard aluminum disks in the wheel construction added to the visual appeal of the Legacy Wagon 2.5 250T. The aluminum material not only enhanced the vehicle's overall aesthetics but also contributed to reduced weight, which could positively impact handling and fuel efficiency.

The specific design and styling details of the wheels were not mentioned in the available information. However, it's worth noting that the choice of wheel design can vary based on the specific trim level or optional packages available for the Legacy Wagon 2.5 250T.

Overall, the wheel specifications of the 1997-1998 Subaru Legacy Wagon 2.5 250T with air suspension and 4WD were designed to provide a balance of style, performance, and functionality. The wheels contributed to the vehicle's stability, handling, and overall driving experience.

Trim Levels and Options

The 1997-1998 Subaru Legacy Wagon 2.5 250T with air suspension and 4WD offered various trim levels and optional features, allowing drivers to customize their vehicles according to their preferences and needs. The available trim levels and options provided additional comfort, convenience, and performance enhancements.

Exact details regarding the specific trim levels and options for the Legacy Wagon 2.5 250T were not provided in the available information. However, it is common for automakers to offer a range of trim levels that provide varying levels of features and equipment.

Trim levels often include base or entry-level trims, mid-level trims, and higher-end trims that offer additional luxury and technology features. These trims may come with different interior and exterior styling elements, such as specific upholstery materials, color options, and wheel designs.

Optional features and packages may include additions such as advanced audio systems, upgraded infotainment systems, navigation systems, leather upholstery, power-adjustable seats, heated seats, sunroof, and advanced safety features.

The specific options and trim levels available for the Legacy Wagon 2.5 250T may vary depending on the market or region. It is recommended to consult the official documentation or contact Subaru dealerships for detailed information about the available trim levels and options during that specific production period.

By offering different trim levels and optional features, the 1997-1998 Subaru Legacy Wagon 2.5 250T with air suspension and 4WD aimed to cater to a wider range of customer preferences and provide a personalized driving experience.

Conclusion

The 1997-1998 Subaru Legacy Wagon 2.5 250T with air suspension and 4WD offered a combination of features and capabilities that made it a desirable choice for drivers during that period. With its reliable performance, versatile design, and comfortable interior, this Subaru model provided a practical and enjoyable driving experience.

The Legacy Wagon 2.5 250T featured a powerful 2.5-liter engine, delivering responsive acceleration and ample power for various driving situations. The air suspension system enhanced ride comfort and stability, absorbing road imperfections and providing a smooth driving experience.

With its 4WD capability, the Legacy Wagon offered enhanced traction and control, making it suitable for different terrains and weather conditions. Whether driving on slippery surfaces or venturing off-road, the 4WD system ensured a confident and capable performance.

The Legacy Wagon's dimensions and size provided ample interior space for both passengers and cargo. The comfortable seating arrangement and well-designed cabin allowed for a pleasant driving experience, even during long journeys.

Furthermore, the Legacy Wagon 2.5 250T emphasized fuel efficiency without compromising performance. Its fuel consumption figures offered a balance between power and economy, reducing fuel expenses and minimizing environmental impact.

Although specific details regarding trim levels and options were not provided, the availability of different trims and optional features allowed drivers to personalize their vehicles according to their preferences and needs.

In conclusion, the 1997-1998 Subaru Legacy Wagon 2.5 250T with air suspension and 4WD offered a reliable, versatile, and comfortable driving experience. Its combination of performance, safety features, and practicality made it a popular choice among drivers seeking a capable and enjoyable vehicle during that period.

Frequently Asked Questions (FAQ) about the 1997-1998 Subaru Legacy Wagon 2.5 250T with Air Suspension and 4WD

What years were the 1997-1998 Subaru Legacy Wagon 2.5 250T with air suspension and 4WD produced?

The Subaru Legacy Wagon 2.5 250T with air suspension and 4WD was produced specifically for the model years 1997 and 1998.

What is the difference between the 1997 and 1998 Subaru Legacy Wagon 2.5 250T?

The 1997 and 1998 Subaru Legacy Wagon 2.5 250T models are very similar in terms of specifications and features. However, minor changes and updates might have been made between the two model years.

What is the engine size and capacity of the 1997-1998 Subaru Legacy Wagon 2.5 250T?

The Subaru Legacy Wagon 2.5 250T is equipped with a 2.5-liter engine, providing a displacement or engine capacity of 2457 cm3 or 149.9 cu-in.

What is the drivetrain configuration of the Subaru Legacy Wagon 2.5 250T?

The Subaru Legacy Wagon 2.5 250T features a 4WD drivetrain, which means power is distributed to all four wheels for enhanced traction and stability.

Are there different generations of the Subaru Legacy Wagon 2.5 250T with air suspension and 4WD?

The 1997-1998 Subaru Legacy Wagon 2.5 250T belongs to the second generation of the Legacy series, known as the BD/BG generation.

What are the engine options available for the Subaru Legacy Wagon 2.5 250T?

The Subaru Legacy Wagon 2.5 250T is powered by a single engine option, the 2.5-liter engine with the code EJ25.

Does the Subaru Legacy Wagon 2.5 250T have any special complectations or trims?

Specific trim levels or complectations for the Subaru Legacy Wagon 2.5 250T with air suspension and 4WD were not provided in the available information.

What are the dimensions of the Subaru Legacy Wagon 2.5 250T?

The exterior dimensions of the Subaru Legacy Wagon 2.5 250T include a length of 468 cm (184.25 inches), width of 169.5 cm (66.73 inches), and height of 149 cm (58.66 inches).

Does the Subaru Legacy Wagon 2.5 250T have a fuel-efficient engine?

The 2.5-liter engine of the Subaru Legacy Wagon 2.5 250T provides a balance between performance and fuel efficiency, but specific fuel consumption figures were not provided in the available information.

What type of suspension does the Subaru Legacy Wagon 2.5 250T have?

The Subaru Legacy Wagon 2.5 250T is equipped with air suspension, offering a comfortable and smooth ride by adjusting the air pressure in the suspension system.

Is the Subaru Legacy Wagon 2.5 250T suitable for off-road driving?

Yes, with its 4WD capability and air suspension system, the Subaru Legacy Wagon 2.5 250T is well-suited for off-road driving, providing enhanced traction and stability on challenging terrains.


Brian Wong - Senior Reviews Editor of cars-directory.net

Brian Wong / Author

Brian Wong is an accomplished automotive journalist and editor with a passion for cars. With over a decade of experience in the industry, he has established himself as a trusted voice in the automotive community. Brian has written extensively about a wide range of topics in the field, from the latest trends in car design to innovative safety features and emerging technologies. As a senior reviews editor, he is responsible for test driving and analyzing the latest cars on the market, providing readers with accurate and objective reviews. His articles are widely read and respected for their depth of knowledge and analysis. Brian is committed to staying at the forefront of the latest developments in the automotive industry, and is dedicated to sharing his expertise and insights with his readers.

Add Comment

 * - The field should be filled
* Your Name:
 Contact (e-mail, phone...):
* Comments:
Photos: