2002 Subaru Pleo 660 A 4WD Specs

OVERVIEW

With a fuel consumption of 47 mpg US - 56.4 mpg UK - 5.0 L/100km, a curb weight of 2557 lbs (1160 kg), the Subaru Pleo 660 A 4WD has a 4 cylinder SOHC engine, a Regular gasoline engine EN07. This engine EN07 produces a maximum power of 46.6 PS (46 bhp - 34.3 kW) at 6000 rpm and a maximum torque of 57.8 Nm (42.6 lb.ft - 5.9 kg.m) at 5200 rpm. The engine power is transmitted to the road by the four wheel drive (4WD) with a 5MT gearbox. For stopping power, the Subaru Pleo 660 A 4WD braking system includes drum at the rear and V disk at the front. Stock tire sizes are 155/70 on 12 inch rims at the rear and 155/70 on 12 inch rims at the front. Chassis details - Subaru Pleo 660 A 4WD has strut rear suspension and strut front suspension for road holding and ride confort.

Add to compare list

- Present
- Option
- Not Present (or Dealer Option)

• Search Car Specs
• Other Pleo Specs Database

More photos Subaru Pleo

By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on April 23, 2024

Introduction

The 2002-2003 Subaru Pleo 660 A 4WD is a compact car that encapsulates practicality and efficiency within its modest dimensions. Designed to navigate both urban streets and less-traveled paths, this vehicle offers a versatile solution for those seeking reliability and adaptability. With a production span from October 2002 to December 2003, the Pleo 660 A 4WD captures a snapshot of automotive engineering from this era.

Engineered with a 4WD drivetrain, the Pleo 660 A ensures optimal traction and stability, granting drivers the confidence to traverse various terrains. The car's power is harnessed through a 5-speed manual transmission, allowing for a dynamic driving experience while maintaining control over gear shifts.

Beneath its compact exterior lies a 658 cm³ engine, known by its code name EN07. This powerplant provides an output of 46.6 PS (or 46 bhp) at 6000 rpm, coupled with a torque of 57.8 Nm at 5200 rpm. The Pleo's engine composition includes 4 cylinders with a single overhead camshaft (SOHC), running on regular gasoline. Its fuel efficiency is notable, with a fuel consumption of 47 mpg (US) in the 10/15 mode or 5.0 L/100km, adhering to the ecological standards of its time.

In terms of size, the Pleo's exterior dimensions are 339.5 cm in length, 147.5 cm in width, and 155 cm in height. The wheelbase measures 231 cm, while the ride height stands at 14 cm, contributing to a manageable turning diameter of 4.6 meters. Accommodating up to four passengers through five doors, this car offers a balance between interior space and compactness.

With its array of features including standard power steering, keyless entry, and options for air conditioning, the Pleo 660 A 4WD caters to both convenience and comfort. Safety is not overlooked, with the inclusion of a driver's airbag as standard and the availability of a passenger airbag for added protection.

This introduction to the 2002-2003 Subaru Pleo 660 A 4WD showcases its blend of practicality, performance, and efficiency within a compact package. As we delve deeper, we'll explore its specifications, dimensions, engine capabilities, safety features, and more, uncovering the intricacies that define this era's automotive landscape.

Model Years

The model years 2002 to 2003 mark a notable phase for the Subaru Pleo 660 A 4WD, a compact vehicle that made its presence felt on the roads during this period. With its production spanning from October 2002 to December 2003, the Pleo 660 A 4WD entered the automotive scene as a solution that catered to various driving needs and preferences.

These years saw the emergence of a car that encapsulated the essence of practicality and maneuverability, all while maintaining a focus on efficiency and performance. The 2002-2003 model years saw the Pleo 660 A 4WD as a part of Subaru's lineup, providing an option that appealed to those who required versatility in their daily commutes and beyond.

During these model years, the Pleo 660 A 4WD carried forward its reputation for reliability, accentuated by its 4WD drivetrain that provided enhanced traction and control. The incorporation of a 5-speed manual transmission added to the engaging driving experience, allowing drivers to seamlessly shift gears while navigating diverse terrains.

Under the hood, the engine's code name, EN07, became synonymous with the power and efficiency that the Pleo 660 A 4WD offered. Its 658 cm³ engine capacity aligned with the era's focus on practicality and fuel economy. This compact engine combined with its 4-cylinder, single overhead camshaft (SOHC) configuration to deliver a balance between performance and efficiency.

As we delve into the intricacies of the Pleo 660 A 4WD's model years, we'll explore how these vehicles became emblematic of the automotive landscape of the early 2000s. By examining its specifications, dimensions, engine capabilities, safety features, and more, we gain insight into how this vehicle carved a distinct niche for itself within its generation.

Trim Levels

Within the span of 2002 to 2003, the Subaru Pleo 660 A 4WD emerged with a range of trim levels that catered to diverse preferences and requirements. These distinct trim levels showcased the flexibility and adaptability that the Pleo 660 A 4WD aimed to offer to its drivers during this era.

Each trim level was designed to provide a tailored driving experience, making it possible for buyers to choose a variant that suited their specific needs. The availability of various trims allowed individuals to select the features and specifications that resonated with their lifestyle and priorities.

From the foundational features present in the base trim to the enhanced options available in higher-tier trims, the Pleo 660 A 4WD ensured that its lineup accommodated a spectrum of preferences. These trim levels often encompassed differences in technology, comfort, safety features, and other amenities, offering buyers the opportunity to align their choice with their desired driving experience.

The diverse range of trim levels also allowed the Pleo 660 A 4WD to cater to a broad audience, from those seeking a more minimalist driving experience to those looking for a vehicle equipped with additional luxuries and conveniences. This approach mirrored the automotive industry's trend toward providing customized options for drivers during this time.

As we delve into the specifics of each trim level, we'll uncover the unique offerings that set them apart, allowing us to appreciate how the Subaru Pleo 660 A 4WD aimed to address individual preferences while maintaining its core identity as a compact, reliable, and efficient vehicle.

Engine Specifications

At the heart of the 2002-2003 Subaru Pleo 660 A 4WD lies a meticulously engineered powertrain that embodies efficiency and performance. The engine specifications of this compact vehicle exemplify the balance between power and fuel economy, a testament to Subaru's commitment to delivering vehicles that cater to various driving needs.

Known by its engine code name EN07, the powerplant within the Pleo 660 A 4WD is a 4-cylinder SOHC configuration. This arrangement optimizes the engine's performance and efficiency, allowing it to deliver power seamlessly while maintaining a focus on fuel consumption.

With a displacement of 658 cm³, the Pleo's engine capacity aligns with the compact nature of the vehicle, ensuring that the powertrain doesn't compromise the car's overall dimensions. This approach mirrors the era's emphasis on practicality and maneuverability.

Generating a maximum power output of 46.6 PS (or 46 bhp) at 6000 rpm, the engine presents a blend of responsiveness and control. This power output provides ample acceleration for urban driving and ensures that the Pleo 660 A 4WD remains agile in various scenarios.

The engine's torque output is equally impressive, with a peak torque of 57.8 Nm at 5200 rpm. This torque profile contributes to the vehicle's ability to handle inclines and challenging terrains while maintaining efficiency.

Fuel efficiency remains a hallmark of the Pleo 660 A 4WD's engine specifications. With a fuel consumption of 47 mpg (US) in the 10/15 mode, or 5.0 L/100km, the vehicle aligns with the era's increasing focus on environmental consciousness and sustainability.

The engine's integration of regular gasoline furthers its accessibility, providing a straightforward and widely available fuel source for drivers. This consideration for practicality extends to both the engine's composition and its compatibility with standard fuel options.

As we delve into the intricacies of the Pleo 660 A 4WD's engine specifications, we uncover the synergistic relationship between power, efficiency, and design. This powertrain serves as the dynamic core of a vehicle that not only meets transportation needs but also offers a distinctive driving experience emblematic of its time.

Fuel Efficiency

The fuel efficiency of the 2002-2003 Subaru Pleo 660 A 4WD embodies a balance between practicality and performance, aligning with the vehicle's compact and adaptable nature. During this era, the automotive industry witnessed an increasing emphasis on fuel economy, and the Pleo 660 A 4WD responded to this trend by delivering an efficient driving experience without compromising on its capabilities.

Equipped with a powertrain that features a 658 cm³ engine and a 4-cylinder SOHC configuration, the Pleo 660 A 4WD showcases an impressive fuel consumption of 47 mpg (US) in the 10/15 mode or 5.0 L/100km. This fuel efficiency is a testament to Subaru's dedication to creating vehicles that cater to the economic and environmental concerns of its time.

The compact size of the Pleo 660 A 4WD's engine, coupled with its optimized power output, contributes to its ability to offer an economical drive. This efficiency aligns with urban driving demands while also catering to those who seek extended journeys with fewer fuel stops.

In an era marked by a growing awareness of ecological concerns, the Pleo 660 A 4WD addresses these considerations by adhering to the emission regulations of its time. This commitment to environmental consciousness is evident in its ecological type designation, aligning with emission reduction standards and regulations.

Overall, the fuel efficiency of the Pleo 660 A 4WD reflects the vehicle's adaptability to a changing automotive landscape. As we explore this facet of the vehicle's specifications, we gain insight into how Subaru harnessed engineering innovation to provide drivers with an efficient and responsive driving experience, underlining the values that defined this era's automotive industry.

Dimensions and Sizes

The 2002-2003 Subaru Pleo 660 A 4WD's dimensions and sizes encapsulate its compact yet accommodating nature, embodying a balance between space utilization and maneuverability. Designed to navigate urban environments and beyond, this vehicle's measurements reflect its adaptability to various driving scenarios.

With an exterior length of 339.5 cm and a width of 147.5 cm, the Pleo 660 A 4WD occupies a footprint that is well-suited to city streets and tight parking spaces. Its compact exterior dimensions contribute to its agility, making it easy to maneuver through congested areas while also enhancing its parking capabilities.

The vehicle's exterior height of 155 cm complements its compact dimensions, allowing it to effortlessly navigate under overpasses and into garages. These dimensions, when combined with the vehicle's 4WD drivetrain, position the Pleo 660 A 4WD as a versatile option for both urban and outdoor adventures.

The wheelbase of 231 cm serves as a foundation for stability and a smooth ride, while the ride height of 14 cm provides a balance between ground clearance and overall stability. This ride height, coupled with a turning diameter of 4.6 meters, ensures that the Pleo 660 A 4WD is primed for efficient navigation through a range of environments.

Inside, the vehicle accommodates up to four passengers through five doors, offering a balance between interior space and exterior compactness. While specific interior dimensions are not provided, the vehicle's focus on maximizing passenger comfort within its compact frame remains evident.

The Pleo 660 A 4WD's dimensions and sizes reflect its versatility, striking a chord between efficient urban driving and the capacity to venture beyond city limits. As we delve into the details of its measurements, we gain an appreciation for how Subaru engineered a vehicle that could seamlessly adapt to the demands of diverse driving scenarios, embodying the values and priorities of its time.

Wheel Configuration

The wheel configuration of the 2002-2003 Subaru Pleo 660 A 4WD plays a pivotal role in ensuring a responsive and controlled driving experience. Designed to complement the vehicle's compact dimensions and 4WD drivetrain, the wheel configuration contributes to its agility and stability across various terrains.

The Pleo 660 A 4WD is equipped with front and rear wheels that align with the vehicle's proportions, enhancing its overall balance. The front axle length of 129 cm and rear axle length of 126.5 cm reflect a well-calibrated wheelbase that supports stability during acceleration, braking, and cornering.

The vehicle's wheels are paired with a suspension system that ensures a smooth and controlled ride. The front suspension utilizes a strut design, while the rear suspension similarly features a strut setup. This configuration, along with the compact wheelbase, contributes to the Pleo's ability to navigate through diverse road conditions while providing passengers with a comfortable experience.

The tire dimensions of 155/70 R12 highlight a focus on practicality and efficiency. These tire specifications balance traction, stability, and fuel efficiency, enhancing the Pleo 660 A 4WD's ability to handle both urban and outdoor driving scenarios.

The wheel configuration of the Pleo 660 A 4WD aligns with its purpose as a compact and versatile vehicle. It underscores Subaru's commitment to delivering a driving experience that combines maneuverability and stability, ensuring that drivers can confidently navigate various terrains while enjoying the benefits of a well-engineered wheel setup.

Fuel Tank Capacity

The fuel tank capacity of the 2002-2003 Subaru Pleo 660 A 4WD reflects a consideration for efficiency and convenience, aligning with the vehicle's compact dimensions and economic focus. During this era, optimizing fuel capacity played a pivotal role in enhancing driving experiences and reducing the need for frequent refueling.

The Pleo 660 A 4WD is equipped with a fuel tank that can hold 8.4 US gallons (32 liters) of fuel. This capacity strikes a balance between ensuring a substantial driving range and maintaining the vehicle's lightweight and compact frame.

The choice of an 8.4-gallon fuel tank mirrors the Pleo's identity as a vehicle designed for practicality and economy. This capacity is tailored to urban and suburban driving, enabling drivers to cover reasonable distances without the need for frequent fuel stops.

The Pleo's fuel tank capacity is a testament to Subaru's understanding of the needs of modern drivers. By providing a well-calibrated fuel tank that aligns with the vehicle's compact size and efficient drivetrain, Subaru aimed to offer a vehicle that not only maximized fuel usage but also minimized inconveniences associated with refueling. As we delve into the specifics of its fuel tank capacity, we gain insight into how Subaru sought to provide a driving experience that was not only economical but also seamless and hassle-free.

Fuel Consumption

The fuel consumption of the 2002-2003 Subaru Pleo 660 A 4WD exemplifies a harmonious blend of efficiency and performance, aligning with the vehicle's compact design and economic sensibilities. In an era marked by an increasing focus on environmental consciousness and economical driving, the Pleo 660 A 4WD delivers fuel consumption figures that cater to both urban commuters and those embarking on longer journeys.

Operating under the 10/15 mode testing protocol, the Pleo 660 A 4WD achieves a fuel consumption of 47 mpg (US), which translates to approximately 56.4 mpg in the UK or 5.0 L/100km. These figures underscore the vehicle's reputation as an economical choice, aligning with Subaru's commitment to crafting vehicles that offer both practicality and efficiency.

The 10/15 mode testing protocol reflects real-world driving conditions, including urban and suburban scenarios. This approach ensures that the Pleo's fuel consumption figures resonate with the experiences of everyday drivers, affirming its relevance within the automotive landscape of its time.

The Pleo's ability to achieve such fuel efficiency is a result of the synergistic relationship between its engine, drivetrain, and compact dimensions. The 4WD drivetrain contributes to traction and stability, enhancing efficiency by delivering power where it's needed most. Additionally, the 658 cm³ engine's power output is optimized to balance performance and fuel economy, making the Pleo an efficient choice for various driving scenarios.

As we delve into the specifics of the Pleo 660 A 4WD's fuel consumption, we gain insight into how Subaru responded to the changing demands of drivers by offering a vehicle that not only met transportation needs but also aligned with societal priorities surrounding fuel efficiency and environmental considerations.

Conclusion

In the years spanning 2002 to 2003, the Subaru Pleo 660 A 4WD emerged as a testament to the automotive industry's evolving priorities. This compact vehicle, with its distinctive dimensions and versatile capabilities, encapsulated the essence of practicality, fuel efficiency, and performance during this era.

With its production occurring between October 2002 and December 2003, the Pleo 660 A 4WD intersected an era that emphasized both environmental consciousness and the need for adaptable vehicles. Its compact exterior dimensions, including a length of 339.5 cm and width of 147.5 cm, made it well-suited for navigating congested streets and urban landscapes.

Beneath its modest exterior, the Pleo housed a 658 cm³ engine, which, coupled with its 4-cylinder SOHC configuration, delivered a harmonious blend of power and fuel efficiency. Generating a maximum power output of 46.6 PS at 6000 rpm and a torque of 57.8 Nm at 5200 rpm, the Pleo's powertrain was optimized to provide agile performance while also ensuring an economical drive.

The vehicle's 4WD drivetrain, together with its 5-speed manual transmission, catered to drivers seeking both traction and control. This combination allowed the Pleo to tackle a range of terrains with confidence and responsiveness, underscoring its adaptability.

Fuel efficiency remained a focal point for the Pleo 660 A 4WD, exemplified by its fuel consumption figures of 47 mpg (US) in the 10/15 mode or 5.0 L/100km. These figures underscored Subaru's dedication to crafting vehicles that aligned with the evolving demands for economical and environmentally friendly driving solutions.

As a versatile option for urban and outdoor driving, the Pleo 660 A 4WD accommodated up to four passengers through five doors, striking a balance between interior space and external dimensions. Its focus on passenger comfort, safety, and convenience was reflected in features such as power steering, keyless entry, and optional air conditioning.

In its entirety, the 2002-2003 Subaru Pleo 660 A 4WD encapsulated the era's ethos, combining practicality, performance, and efficiency within its compact frame. This vehicle's legacy endures as a representation of Subaru's commitment to engineering vehicles that met the multifaceted needs of drivers during a transformative period in the automotive industry.

Frequently Asked Questions (FAQ) About the 2002-2003 Subaru Pleo 660 A 4WD