1999 Subaru Pleo 660 A 4WD Specs

OVERVIEW

With a fuel consumption of 45.2 mpg US - 54.3 mpg UK - 5.2 L/100km, a curb weight of 2513 lbs (1140 kg), the Subaru Pleo 660 A 4WD has a 4 cylinder SOHC engine, a Regular gasoline engine EN07. This engine EN07 produces a maximum power of 45.6 PS (45 bhp - 33.5 kW) at 6400 rpm and a maximum torque of 55.8 Nm (41.2 lb.ft - 5.7 kg.m) at 4000 rpm. The engine power is transmitted to the road by the four wheel drive (4WD) with a 5MT gearbox. For stopping power, the Subaru Pleo 660 A 4WD braking system includes drum at the rear and V disk at the front. Stock tire sizes are 155/70 on 12 inch rims at the rear and 155/70 on 12 inch rims at the front. Chassis details - Subaru Pleo 660 A 4WD has strut rear suspension and strut front suspension for road holding and ride confort.

Add to compare list

- Present
- Option
- Not Present (or Dealer Option)

• Search Car Specs
• Other Pleo Specs Database

By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on April 20, 2024

Introduction to the 1999-2000 Subaru Pleo 660 A 4WD

The "1999-2000 Subaru Pleo 660 A 4WD" marked a notable presence in the automotive landscape during its production span from June 1999 to September 2000. Positioned as a compact and practical vehicle, the Pleo 660 A 4WD garnered attention for its capable 4-wheel drive (4WD) system, making it suitable for various road conditions.

This model featured a 5-speed manual transmission gearbox, offering a level of driver engagement that was appreciated by many. At its heart, the Pleo 660 A 4WD housed an engine with a displacement of 658 cm³ (cubic centimeters) or approximately 40.1 cubic inches. The engine code EN07 defined its powerplant, which was a 4-cylinder SOHC (Single Overhead Camshaft) configuration.

The exterior dimensions of the Pleo 660 A 4WD reflected its compact nature. With an exterior length of around 339.5 cm and a width of about 147.5 cm, the vehicle retained a manageable size for urban driving. The exterior height stood at approximately 157.5 cm, contributing to its distinctive profile.

Inside, the Pleo 660 A 4WD provided seating for up to four occupants across its two seat rows. The weight of the vehicle reached around 820 kg, indicating a lightweight design that could contribute to its efficiency. Notably, the vehicle exhibited a turning diameter of 4.6 meters, enhancing maneuverability in tight spaces.

Fuel efficiency was an important aspect of the Pleo 660 A 4WD, and it came with a fuel tank capacity of 8.4 US gallons or approximately 32 liters. This capacity, combined with its economical fuel consumption figures, positioned the vehicle as a practical choice for drivers seeking fuel savings.

The Pleo 660 A 4WD's suspension system incorporated struts at both the front and rear ends, contributing to a balance between comfort and handling. The vehicle rode on 155/70 R12 tires, further emphasizing its compact nature.

Safety features included a standard driver's airbag, contributing to basic occupant protection. The absence of certain high-tech features like side airbags or advanced driver assistance systems was characteristic of the vehicle's era.

In summary, the "1999-2000 Subaru Pleo 660 A 4WD" offered a compact and efficient driving experience with its 4WD capability, modest engine displacement, and practical dimensions. While not heavily loaded with advanced features, it catered to those who valued simplicity, fuel efficiency, and maneuverability in their daily urban journeys.

Engine Specifications and Options

Powering the "1999-2000 Subaru Pleo 660 A 4WD" was a modest yet efficient engine configuration that contributed to the vehicle's practical appeal. The engine, with a displacement of 658 cm³ or approximately 40.1 cubic inches, was denoted by the engine code EN07. This 4-cylinder SOHC (Single Overhead Camshaft) engine was designed to strike a balance between performance and fuel efficiency.

In terms of output, the engine generated a maximum power of around 45.6 PS or 45 bhp (brake horsepower), which translated to about 33.5 kW (kilowatts). This power was achieved at an engine speed of 6400 rpm, showcasing the engine's ability to deliver its performance in higher rev ranges.

The engine's torque output was also noteworthy, with a maximum torque of approximately 55.8 Nm (Newton-meters) or 41.2 lb.ft (pound-feet). This torque was available at around 4000 rpm, suggesting a practical torque delivery for everyday driving scenarios.

Fueling the engine was regular gasoline, making it compatible with widely available fuel options. In terms of fuel efficiency, the Pleo 660 A 4WD aimed to offer economic operation. The fuel consumption figures in the 10/15 mode were recorded at approximately 45.2 mpg US (miles per gallon), which translates to about 54.3 mpg UK (imperial gallons) or 5.2 L/100km (liters per 100 kilometers).

The engine's design and specifications contributed to the overall character of the vehicle, allowing it to navigate urban environments and short commutes with ease. While not a powerhouse, the engine's focus on efficiency and practicality aligned well with the Pleo 660 A 4WD's intended purpose.

Dimensions and Sizes

The "1999-2000 Subaru Pleo 660 A 4WD" boasted dimensions and sizes that were tailored to urban driving and maneuverability. Its compact nature contributed to its ease of navigation through city streets and parking in tight spaces.

With an exterior length of approximately 339.5 cm (133.66 inches), the Pleo 660 A 4WD retained a manageable footprint, allowing it to slip into parking spaces with relative ease. The width of around 147.5 cm (58.07 inches) further contributed to its urban-friendly design.

Standing at approximately 157.5 cm (62 inches) in height, the vehicle's compact stature was emphasized by its modest vertical profile. The overall exterior size was roughly 339.5x147.5x157.5 cm (133.66x58.07x62 inches), showcasing a harmonious balance of dimensions.

The wheelbase of around 231 cm (90.94 inches) provided stability and room for passengers within the vehicle. Front and rear axle lengths were approximately 128.5 cm (50.59 inches) and 126 cm (49.6 inches) respectively, contributing to the vehicle's balanced proportions.

The Pleo 660 A 4WD maintained a ride height of around 15 cm (5.9 inches), providing sufficient ground clearance for urban obstacles. Its curb weight of approximately 820 kg (1807 lbs) was indicative of its lightweight design, which could contribute to fuel efficiency and nimble handling.

Inside, the vehicle accommodated up to four passengers across its two seat rows. With four doors, including two front doors and two rear doors, the vehicle facilitated easy access for occupants.

The dimensions of the Pleo 660 A 4WD reflected its focus on urban practicality and maneuverability. Its compact size, coupled with its balanced proportions, made it well-suited for navigating through crowded cityscapes and efficiently meeting the demands of everyday driving.

Fuel Tank Capacity Overview

The "1999-2000 Subaru Pleo 660 A 4WD" displayed a fuel tank capacity designed to align with its practical and economical nature. With a fuel tank capacity of approximately 8.4 US gallons (7 UK gallons or 32 liters), the Pleo 660 A 4WD aimed to strike a balance between extended driving range and refueling convenience.

This fuel tank capacity underscored the vehicle's focus on efficiency, particularly when considering its compact dimensions and lightweight design. The capacity provided drivers with a sufficient amount of fuel for both short urban commutes and longer journeys, making it suitable for various driving scenarios.

The Pleo 660 A 4WD's fuel tank capacity contributed to its identity as a practical and economical choice, ensuring that drivers could cover significant distances without frequent refueling stops. This aligns with the vehicle's overall character, which aimed to provide efficient mobility for urban and everyday driving needs.

Fuel Consumption and MPG Ratings

The "1999-2000 Subaru Pleo 660 A 4WD" showcased a fuel-efficient nature that was well-suited for economical urban driving. The vehicle's fuel consumption figures and MPG (miles per gallon) ratings reflected its commitment to providing cost-effective and eco-friendly mobility.

In the 10/15 mode, the Pleo 660 A 4WD exhibited impressive fuel consumption ratings of approximately 45.2 mpg US (miles per gallon), which roughly translates to about 54.3 mpg UK (imperial gallons) or 5.2 L/100km (liters per 100 kilometers). These figures underscored the vehicle's ability to cover substantial distances on a minimal amount of fuel.

The fuel efficiency of the Pleo 660 A 4WD positioned it as a suitable choice for urban commuting, where stop-and-go traffic and shorter trips can contribute to higher fuel consumption in less efficient vehicles. The combination of its compact dimensions, lightweight design, and efficient engine contributed to its commendable fuel consumption performance.

Drivers of the Pleo 660 A 4WD could anticipate enjoying extended driving ranges between refueling stops, thus minimizing the frequency of visits to the gas station. This emphasis on fuel efficiency aligned well with the vehicle's practical and economical identity, making it an attractive option for those seeking to reduce their environmental footprint and fuel expenses.

Exploring Trim Levels and Generations

The "1999-2000 Subaru Pleo 660 A 4WD" was a distinct model within Subaru's lineup during its production years. While it was part of a specific generation, its trim levels and variations were designed to cater to different preferences and needs of potential drivers.

The focus of the Pleo 660 A 4WD was primarily on providing a practical and efficient driving experience. As such, the vehicle may not have featured an extensive array of trim levels or intricate generational changes. Instead, it maintained a consistent approach to offering a compact size, a 4WD drivetrain, and economical fuel consumption.

This commitment to a streamlined design allowed the Pleo 660 A 4WD to excel in its intended purpose of urban commuting and everyday driving. Its trim levels and generations may have shared core features that aligned with this purpose, ensuring that drivers could enjoy its benefits without the complexities of excessive choices.

The Pleo 660 A 4WD's approach to trim levels and generations showcased a dedication to simplicity and efficiency. While it may not have offered an extensive range of options, it excelled in delivering a reliable and practical driving experience that met the needs of its target audience.

Wheel Options and Tire Sizes

The "1999-2000 Subaru Pleo 660 A 4WD" was equipped with wheel options and tire sizes that complemented its compact and urban-friendly design. The focus on practicality extended to these aspects of the vehicle, ensuring a balanced combination of performance and efficiency.

The Pleo 660 A 4WD featured tire dimensions of 155/70 R12 for both the front and rear wheels. This tire size struck a balance between grip, maneuverability, and ride comfort, aligning well with the vehicle's intended purpose of urban commuting and short trips.

The selection of tire dimensions showcased a commitment to stability and predictable handling on a variety of road surfaces. The 155/70 R12 tire size offered a blend of stability and agility, making it well-suited for navigating through city streets and tight corners.

The wheel options and tire sizes of the Pleo 660 A 4WD underscored its focus on practicality and efficiency. While not designed for high-performance driving, these choices contributed to the vehicle's ability to provide a comfortable and controlled driving experience, aligning with its core identity as a compact and economical urban companion.

Notable Features and Technology

The "1999-2000 Subaru Pleo 660 A 4WD" may not have been characterized by an extensive array of cutting-edge features and advanced technologies, but it did offer a range of notable elements that contributed to its overall practicality and usability.

One of the key highlights of the Pleo 660 A 4WD was its 4-wheel drive (4WD) system, which provided enhanced traction and stability, particularly in challenging road conditions. This feature made the vehicle suitable for navigating various terrains, adding a layer of versatility to its capabilities.

Inside the cabin, the vehicle featured power steering, a standard inclusion that contributed to ease of maneuvering, especially in urban environments. The choice of power steering aligned with the vehicle's focus on convenience and driver comfort.

In terms of safety, the Pleo 660 A 4WD came equipped with a standard driver's airbag. While not offering an extensive range of advanced safety features found in modern vehicles, this airbag highlighted the vehicle's commitment to providing basic occupant protection.

The inclusion of features like power steering and the 4WD system underscored the Pleo 660 A 4WD's focus on practicality and usability. While not loaded with a multitude of technological innovations, these elements contributed to enhancing the driving experience and meeting the requirements of its target audience.

Interior and Exterior Details

The "1999-2000 Subaru Pleo 660 A 4WD" displayed a blend of interior and exterior details that contributed to its overall character as a compact and practical vehicle. While not extravagant, these details added to the vehicle's usability and functionality.

On the exterior, the Pleo 660 A 4WD presented a clean and streamlined design. Notable features included ultraviolet glass protection, which helped shield occupants from harmful UV rays while maintaining a comfortable cabin environment. The absence of additional exterior elements like a sunroof, spoilers, or xenon lamps indicated a focus on simplicity and functionality.

Inside the cabin, the vehicle offered basic amenities that catered to driver and passenger comfort. Power windows contributed to ease of use, while a standard manual air conditioning system provided climate control options. The choice of power windows aligned with the vehicle's commitment to practicality and convenience.

While the Pleo 660 A 4WD may not have featured luxurious elements or high-tech gadgets, its interior and exterior details aimed to provide a comfortable and functional environment for occupants. These details, combined with the vehicle's overall design, made it a suitable choice for drivers seeking a straightforward and efficient urban driving experience.

Conclusion and Summary of Specifications

In its production years spanning from June 1999 to September 2000, the "1999-2000 Subaru Pleo 660 A 4WD" made its mark as a compact and efficient vehicle designed for urban mobility. Its focus on practicality, fuel efficiency, and ease of use defined its identity and resonated with drivers seeking economical transportation.

Powered by a 658 cm³ engine with the code EN07, the Pleo 660 A 4WD delivered a balance of power and efficiency. With a maximum power output of approximately 45.6 PS and a torque of around 55.8 Nm, the vehicle's engine offered suitable performance for its intended urban driving environment.

Compact exterior dimensions of approximately 339.5 cm in length, 147.5 cm in width, and 157.5 cm in height contributed to the vehicle's maneuverability and parking ease. Its 4-wheel drive (4WD) system ensured stability and traction on various road surfaces, while the 5-speed manual transmission added to the driving engagement.

Inside, the vehicle accommodated up to four occupants across two seat rows. Notable interior features included power steering and manual air conditioning. The Pleo 660 A 4WD prioritized practicality and comfort over extravagant amenities, making it an ideal choice for short commutes and everyday journeys.

With a fuel tank capacity of approximately 8.4 US gallons, the vehicle's fuel efficiency figures of around 45.2 mpg US in the 10/15 mode demonstrated its commitment to economic operation. These specifications made the Pleo 660 A 4WD a reliable option for cost-conscious drivers.

In summary, the "1999-2000 Subaru Pleo 660 A 4WD" combined compact dimensions, fuel efficiency, and practical features to create a vehicle tailored for urban life. Its specifications and design catered to those seeking basic yet reliable transportation, emphasizing the importance of efficiency and ease of use in everyday driving scenarios.

Frequently Asked Questions about the 1999-2000 Subaru Pleo 660 A 4WD