2002 Subaru Pleo 660 A Specs

OVERVIEW

With a fuel consumption of 52.2 mpg US - 62.7 mpg UK - 4.5 L/100km, a curb weight of 2447 lbs (1110 kg), the Subaru Pleo 660 A has a 4 cylinder SOHC engine, a Regular gasoline engine EN07. This engine EN07 produces a maximum power of 46.6 PS (46 bhp - 34.3 kW) at 6000 rpm and a maximum torque of 57.8 Nm (42.6 lb.ft - 5.9 kg.m) at 5200 rpm. The engine power is transmitted to the road by the front wheel drive (FF) with a 5MT gearbox. For stopping power, the Subaru Pleo 660 A braking system includes drum at the rear and V disk at the front. Stock tire sizes are 155/70 on 12 inch rims at the rear and 155/70 on 12 inch rims at the front. Chassis details - Subaru Pleo 660 A has strut rear suspension and strut front suspension for road holding and ride confort.

Add to compare list

- Present
- Option
- Not Present (or Dealer Option)

• Search Car Specs
• Other Pleo Specs Database

More photos Subaru Pleo

By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on April 24, 2024

Model Introduction

The 2002-2003 Subaru Pleo 660 A marked an era of compact yet versatile vehicles that catered to urban dwellers and those seeking efficient transportation solutions. With its production spanning from October 2002 to December 2003, this model exemplified Subaru's commitment to delivering reliable and practical cars.

Designed with a front-wheel-drive (FF) configuration, the Subaru Pleo 660 A offered a smooth driving experience, enhanced by its 5-speed manual transmission gearbox. This transmission setup facilitated precise control over the vehicle's performance, making it an ideal choice for city driving.

The heart of the Pleo 660 A was its 658 cm3 engine, carrying the engine code EN07. This 4-cylinder SOHC engine generated a maximum power output of 46.6 PS (46 bhp) at 6000 rpm, delivering an optimal balance between power and fuel efficiency. Paired with regular gasoline as its fuel source, the vehicle adhered to the 2000 emission regulation, achieving a notable 50% reduction in emissions.

Beyond its powertrain, the Subaru Pleo 660 A's compact exterior dimensions allowed it to navigate urban streets with ease. Measuring approximately 339.5 cm in length, 147.5 cm in width, and 155 cm in height, the Pleo 660 A exhibited a manageable size, making it well-suited for tight parking spaces. Its 231 cm wheelbase contributed to stability on the road, while a curb weight of 790 kg ensured a nimble and responsive driving experience.

Inside the vehicle, the Pleo 660 A accommodated up to four passengers, spread across two seat rows. The steering location was on the right side, enhancing the driver's visibility in regions with right-hand traffic. The cabin layout incorporated practical features like a floor shifter, while certain options such as keyless entry added convenience.

The Subaru Pleo 660 A catered to safety as well, featuring standard driver's airbag protection and offering an optional passenger airbag. While not equipped with advanced driver assistance systems found in modern vehicles, the Pleo 660 A offered a reliable and secure driving experience for its time.

In essence, the 2002-2003 Subaru Pleo 660 A encapsulated Subaru's dedication to delivering compact cars that combined practicality, efficiency, and straightforward design. With its focus on maneuverability, fuel efficiency, and simplicity, this model emerged as a dependable choice for urban commuters and individuals seeking a modest yet dependable mode of transportation.

Engine Options

The 2002-2003 Subaru Pleo 660 A came equipped with a selection of engine options that balanced performance and efficiency within its compact frame. These engine choices provided drivers with varying levels of power, all tailored to meet the demands of urban driving and beyond.

At the core of the Pleo 660 A's engine lineup was the EN07 engine code, a reliable 4-cylinder SOHC powerplant. This engine type, renowned for its efficiency, produced a maximum power output of 46.6 PS (46 bhp) at 6000 rpm, delivering responsive acceleration for city commuting. Complementing its power delivery was a maximum torque output of 57.8 Nm (42.6 lb.ft) at 5200 rpm, contributing to a capable and agile driving experience.

The Pleo 660 A's engine options were well-suited to the vehicle's size and purpose, offering the right balance between power and fuel economy. This allowed drivers to navigate urban environments efficiently while also providing enough power for highway cruising.

Subaru's commitment to environmental considerations was evident in the Pleo 660 A's fuel efficiency. The vehicle exhibited impressive fuel consumption ratings, achieving approximately 52.2 mpg (US), 62.7 mpg (UK), or 4.5 L/100km in the 10/15 mode. This efficiency not only reduced the vehicle's carbon footprint but also provided a cost-effective solution for drivers seeking to minimize their fuel expenses.

In summary, the 2002-2003 Subaru Pleo 660 A's engine options encapsulated the manufacturer's dedication to delivering practical and efficient powertrains. By offering a balance between power, torque, and fuel economy, these engines ensured that the Pleo 660 A was a capable and reliable urban companion, tailored to the needs of modern commuting.

Horsepower and Torque

The 2002-2003 Subaru Pleo 660 A boasted a capable powertrain that provided commendable horsepower and torque figures, ensuring a balanced driving experience within urban settings and beyond.

At the heart of the Pleo 660 A was the EN07 engine code, a 4-cylinder SOHC powerplant designed to optimize performance and fuel efficiency. This engine generated a maximum power output of 46.6 PS (46 bhp) at 6000 rpm. This horsepower ensured that the vehicle had ample power for maneuvering through city traffic and maintaining a steady pace on highways.

Complementing the horsepower was the engine's torque output, a critical measure of the vehicle's ability to accelerate and handle various driving conditions. The Pleo 660 A's engine produced a maximum torque of 57.8 Nm (42.6 lb.ft) at 5200 rpm. This torque was spread over a range of engine speeds, allowing for responsive acceleration from standstill and confident passing maneuvers when needed.

The combination of horsepower and torque in the Pleo 660 A's engine contributed to its overall performance and drivability. This powertrain was designed with urban commuting in mind, offering sufficient power for navigating crowded streets, while maintaining an efficient fuel consumption profile.

In essence, the 2002-2003 Subaru Pleo 660 A's horsepower and torque figures reflected the manufacturer's commitment to providing a practical and well-rounded driving experience. These specifications contributed to the vehicle's reputation as an agile and efficient city car, making it a dependable choice for daily commuting and more.

Fuel Efficiency

The 2002-2003 Subaru Pleo 660 A was designed with a keen focus on fuel efficiency, delivering impressive mileage that catered to the demands of modern urban living. This commitment to economical operation was evident in the vehicle's fuel consumption ratings, which made it an attractive choice for cost-conscious drivers.

Powered by the EN07 engine code, a 4-cylinder SOHC powerplant, the Pleo 660 A showcased its efficiency prowess by achieving fuel consumption figures of approximately 52.2 mpg (US), 62.7 mpg (UK), or 4.5 L/100km in the 10/15 mode. These ratings represented a balance between power and fuel conservation, allowing drivers to cover more distance on less fuel.

The compact dimensions of the Pleo 660 A, coupled with its efficient powertrain, contributed to its remarkable fuel efficiency. This made it a suitable companion for navigating city streets and tackling urban traffic, where frequent stops and starts are common.

Subaru's dedication to eco-friendliness was also evident in the Pleo 660 A's adherence to the 2000 emission regulation, which aimed for a 50% reduction in emissions. This commitment aligns with contemporary environmental concerns and showcases the manufacturer's forward-looking approach to vehicle design.

In conclusion, the 2002-2003 Subaru Pleo 660 A's emphasis on fuel efficiency highlighted its suitability for urban commuting and practical day-to-day usage. By delivering impressive fuel consumption figures without compromising performance, the Pleo 660 A proved to be a responsible choice for drivers seeking both efficiency and affordability in their daily drives.

Fuel Consumption Ratings

The 2002-2003 Subaru Pleo 660 A exhibited exceptional fuel consumption ratings, solidifying its reputation as a practical and economical choice for urban commuting and everyday driving. These fuel consumption figures underscored Subaru's commitment to producing vehicles that were efficient and environmentally conscious.

Fueled by the EN07 engine code, a 4-cylinder SOHC powerplant, the Pleo 660 A achieved fuel consumption ratings of around 52.2 mpg (US), 62.7 mpg (UK), or 4.5 L/100km in the 10/15 mode. These impressive numbers demonstrated the vehicle's ability to cover long distances on minimal fuel, making it an ideal companion for navigating city streets and highways alike.

The combination of the Pleo 660 A's compact size, efficient powertrain, and lightweight construction contributed to its exceptional fuel economy. This allowed drivers to minimize fuel expenses and reduce their carbon footprint without sacrificing the vehicle's practicality.

In summary, the 2002-2003 Subaru Pleo 660 A's fuel consumption ratings showcased its efficiency and sustainability. These figures exemplified the manufacturer's dedication to offering a vehicle that not only provided reliable transportation but also contributed to cost savings and environmental responsibility.

MPG Ratings

The 2002-2003 Subaru Pleo 660 A earned accolades for its remarkable MPG (miles per gallon) ratings, establishing itself as an efficient and economical choice for drivers seeking budget-friendly and sustainable transportation solutions. These MPG ratings underscored the vehicle's prowess in achieving optimal fuel efficiency without compromising its practicality.

Powered by the EN07 engine code, a 4-cylinder SOHC engine, the Pleo 660 A garnered impressive MPG ratings. These ratings varied depending on the region's measurement standards. In the US, the vehicle achieved around 52.2 mpg, while in the UK, it boasted a remarkable 62.7 mpg. In terms of the metric system, the Pleo 660 A showcased a fuel consumption rate of approximately 4.5 L/100km in the 10/15 mode.

These MPG ratings highlighted the Pleo 660 A's ability to cover extended distances on minimal fuel consumption, making it an excellent choice for daily commutes and longer journeys. The compact size and lightweight construction of the vehicle further contributed to its impressive MPG figures, aligning with Subaru's commitment to eco-friendliness and practicality.

In summary, the 2002-2003 Subaru Pleo 660 A's MPG ratings emphasized its role as an economical and efficient option for modern driving needs. By achieving outstanding fuel efficiency, the Pleo 660 A provided drivers with the benefits of reduced fuel expenses and a reduced environmental impact, all while maintaining a comfortable and practical driving experience.

Fuel Tank Capacity

The 2002-2003 Subaru Pleo 660 A came equipped with a practical fuel tank capacity that aligned with its efficient and economical design. This fuel tank capacity allowed the vehicle to maximize its already impressive fuel efficiency, minimizing the need for frequent refueling and providing drivers with a convenient and hassle-free driving experience.

The Pleo 660 A's fuel tank capacity was measured at approximately 8.4 US gallons (7 UK gallons or 32 liters). This capacity ensured that the vehicle could cover substantial distances on a single tank of fuel, contributing to its role as an efficient urban commuter and an excellent choice for longer journeys.

The combination of the Pleo 660 A's efficient powertrain, compact size, and modest fuel tank capacity made it a well-rounded option for drivers seeking economical and sustainable transportation. The capacity struck a balance between providing ample driving range and minimizing the frequency of fuel stops, making it suitable for both city driving and highway cruising.

In conclusion, the 2002-2003 Subaru Pleo 660 A's fuel tank capacity showcased its practicality and efficiency. This capacity allowed the vehicle to leverage its fuel consumption ratings and MPG figures, offering drivers a cost-effective and eco-friendly means of transportation that required fewer stops at the fuel pump.

Dimensions and Sizes

The 2002-2003 Subaru Pleo 660 A featured dimensions and sizes that were thoughtfully designed to ensure efficient maneuverability and practicality, especially in urban environments. These dimensions allowed the vehicle to navigate through tight spaces, making it an ideal choice for city driving and parking.

With an exterior length of approximately 339.5 cm (133.66 inches), the Pleo 660 A struck a balance between compactness and interior space. This length enabled the vehicle to easily navigate through congested traffic and fit into parking spots with limited space.

The exterior width of the Pleo 660 A was measured at around 147.5 cm (58.07 inches), while the exterior height stood at approximately 155 cm (61.02 inches). These dimensions contributed to the vehicle's agility and ease of handling, allowing it to weave through urban streets and tight corners effortlessly.

The overall exterior size of the Pleo 660 A was approximately 339.5 x 147.5 x 155 cm (133.66 x 58.07 x 61.02 inches). This compact profile ensured that the vehicle maintained a nimble and responsive character, making it well-suited for urban commutes and urban parking challenges.

The interior dimensions, while not provided in the available data, were likely designed with a focus on maximizing space for occupants while retaining the vehicle's small footprint.

In summary, the 2002-2003 Subaru Pleo 660 A's dimensions and sizes highlighted its suitability for urban environments. By offering compact exterior measurements while maintaining a functional interior, the Pleo 660 A was able to provide drivers with a comfortable and efficient driving experience in the midst of city living.

Wheel Options

The 2002-2003 Subaru Pleo 660 A offered a range of wheel options that complemented its design and enhanced its overall performance and handling characteristics. These wheel options allowed drivers to customize the vehicle's appearance and tailor its driving dynamics to their preferences.

The front and rear wheels of the Pleo 660 A were equipped with tires featuring dimensions of 155/70 R12. These dimensions represented a balance between comfort, grip, and maneuverability, making the vehicle adept at navigating city streets and varied road conditions.

While specific details about optional wheel upgrades or variations in wheel designs are not provided in the available data, it's likely that Subaru offered a selection of wheel styles that allowed owners to personalize their Pleo 660 A to some extent.

The chosen wheel options played a role in enhancing the vehicle's stability, traction, and overall driving experience. The size and type of wheels influenced aspects such as ride quality, cornering performance, and braking efficiency.

In essence, the 2002-2003 Subaru Pleo 660 A's wheel options contributed to its visual appeal and driving dynamics. While the exact range of wheel choices is not outlined in the available data, the vehicle's standard tire dimensions and its overall design ensured that it provided a balanced and responsive driving experience that catered to urban and everyday driving needs.

Trim Levels and Variants

The 2002-2003 Subaru Pleo 660 A was offered in a variety of trim levels and variants, catering to different preferences and needs of drivers. These trim levels provided distinct features and options, allowing potential buyers to choose the version that best aligned with their requirements.

While specific details about the various trim levels and variants of the Pleo 660 A are not provided in the available data, it's likely that Subaru offered a range of options that allowed drivers to customize their vehicles. These options could encompass interior features, exterior enhancements, and technology packages.

The availability of different trim levels and variants ensured that drivers could select the Pleo 660 A that suited their desired level of comfort, convenience, and style. From basic configurations focused on practicality to more premium variants with additional features, the trim levels aimed to accommodate a diverse range of preferences.

While the exact details of each trim level are not outlined here, it's important to note that the variety of options available in the 2002-2003 Subaru Pleo 660 A highlighted the manufacturer's commitment to meeting the diverse needs of its customers. By offering different levels of customization, Subaru allowed buyers to find a Pleo 660 A that aligned perfectly with their individual preferences and requirements.

Generations and Changes

The 2002-2003 Subaru Pleo 660 A represented a specific generation in the model's lineup, characterized by its compact dimensions, efficient powertrain, and practical design. While specific details about changes between generations are not provided in the available data, it's important to highlight the continuity of Subaru's approach to delivering a reliable and economical vehicle.

The Pleo 660 A's generation from 2002 to 2003 demonstrated the manufacturer's commitment to producing vehicles that catered to the needs of urban commuters and drivers seeking efficient transportation solutions. While updates and changes might have occurred over the years, this particular generation likely continued to prioritize fuel efficiency, compactness, and maneuverability.

Subaru's consistent approach to delivering practical and economical vehicles ensured that the Pleo 660 A maintained its core characteristics across its generations. The vehicle's enduring appeal lies in its ability to provide a dependable and efficient means of transportation, making it a suitable choice for various driving environments.

In summary, the 2002-2003 Subaru Pleo 660 A's generation was characterized by its commitment to practicality and efficiency. While specific changes between generations are not detailed in the available data, the vehicle's enduring popularity and reputation for reliability underscore Subaru's dedication to delivering vehicles that align with the needs of modern drivers.

Interior Space

The 2002-2003 Subaru Pleo 660 A offered a well-thought-out interior space that catered to the needs of its occupants while maintaining its compact dimensions. While specific details about the interior space dimensions are not provided in the available data, it's likely that Subaru designed the interior to maximize comfort and practicality.

The compact exterior dimensions of the Pleo 660 A did not necessarily translate to a cramped interior. Subaru's approach likely focused on clever space utilization to ensure that occupants had sufficient room to sit comfortably and move around within the vehicle.

The vehicle's interior space was likely designed to accommodate up to four passengers, spread across two seat rows. The choice of a four-passenger capacity reflected the vehicle's role as a compact city car, ideal for small families or individuals seeking efficient transportation.

Additionally, the interior layout would likely have included practical features such as a floor shifter, steering located on the right side for regions with right-hand traffic, and other elements that contributed to the vehicle's overall usability and functionality.

In essence, the 2002-2003 Subaru Pleo 660 A's interior space would have struck a balance between providing sufficient room for occupants and ensuring that the vehicle maintained its compact and efficient character. The interior design likely aimed to create a comfortable and user-friendly environment, making the Pleo 660 A a practical choice for daily commuting and urban driving scenarios.

Safety Features

The 2002-2003 Subaru Pleo 660 A prioritized safety features to provide occupants with a secure and protected driving experience, even within its compact frame. While specific details about safety features are not provided in the available data, it's likely that Subaru incorporated standard safety measures to enhance the vehicle's overall safety profile.

The Pleo 660 A was likely equipped with essential safety features, with a focus on providing protection in the event of collisions or accidents. This would include features such as driver's airbags, which were commonly found in vehicles of this era. These airbags aimed to mitigate the impact of frontal collisions and protect the driver in case of sudden stops.

While advanced safety technologies such as curtain airbags, parking radars, and collision mitigation systems might not have been prevalent in vehicles of this generation, the Pleo 660 A likely featured basic safety measures to ensure the well-being of its occupants.

The vehicle's construction and design likely contributed to its safety as well. Subaru's dedication to engineering vehicles with structural integrity and impact-absorbing features would have played a role in enhancing the Pleo 660 A's overall safety performance.

In summary, the 2002-2003 Subaru Pleo 660 A's safety features emphasized the manufacturer's commitment to delivering a vehicle that provided basic protection to its occupants. While lacking some of the advanced safety technologies of modern vehicles, the Pleo 660 A likely incorporated standard safety measures that were consistent with industry standards at the time.

Performance Highlights

The 2002-2003 Subaru Pleo 660 A offered commendable performance highlights that were tailored to urban commuting and efficient driving. While specific details about performance parameters are not provided in the available data, it's likely that the Pleo 660 A's performance characteristics were designed to balance power, agility, and fuel efficiency.

Powered by the EN07 engine code, a 4-cylinder SOHC powerplant, the Pleo 660 A delivered a maximum power output of 46.6 PS (46 bhp) at 6000 rpm. This horsepower allowed the vehicle to navigate city streets and highways with ease, providing responsive acceleration and steady cruising capabilities.

Complementing the power output was a maximum torque of 57.8 Nm (42.6 lb.ft) at 5200 rpm. This torque contributed to the vehicle's agility and drivability, ensuring that it could handle a variety of driving conditions with confidence.

The Pleo 660 A's performance highlights were likely geared toward urban maneuverability and efficiency. Its compact dimensions, efficient powertrain, and lightweight construction made it well-suited for navigating crowded streets and tight corners, while also delivering impressive fuel economy.

In essence, the 2002-2003 Subaru Pleo 660 A's performance highlights emphasized its role as a capable and efficient urban commuter. By providing a balance between power, torque, and fuel efficiency, the Pleo 660 A showcased its ability to cater to the needs of drivers seeking practical and economical transportation solutions for their daily journeys.

Conclusion

The 2002-2003 Subaru Pleo 660 A encompassed a package of attributes that solidified its standing as a practical and efficient vehicle, well-suited for urban dwellers and those seeking economical transportation. From its compact dimensions to its fuel-efficient powertrain, the Pleo 660 A offered a well-rounded solution to the demands of modern driving.

With its compact exterior dimensions, the Pleo 660 A excelled in navigating congested city streets and parking in tight spaces. The carefully designed interior space provided comfortable seating for up to four occupants, making it an ideal choice for small families or individuals on the go.

The EN07 engine code powered the Pleo 660 A with its 4-cylinder SOHC configuration, delivering an optimal balance between power and efficiency. The vehicle's emphasis on fuel economy was reflected in its impressive fuel consumption ratings and MPG figures, offering drivers the advantage of lower fuel expenses and reduced environmental impact.

While the available data did not outline advanced safety technologies, it's likely that the Pleo 660 A incorporated standard safety features to ensure the protection of its occupants. This focus on safety, along with its agile performance characteristics, contributed to a confident and secure driving experience.

In summary, the 2002-2003 Subaru Pleo 660 A combined practicality, efficiency, and performance in a compact and economical package. Its design catered to urban living, making it a valuable option for those seeking a reliable and cost-effective mode of transportation. As a result, the Pleo 660 A left a lasting impression as a vehicle that excelled in fulfilling the needs of drivers seeking an efficient and dependable solution for their everyday journeys.

Frequently Asked Questions About the 2002-2003 Subaru Pleo 660 A