1998 Subaru Pleo 660 F Specs


OVERVIEW

With a fuel consumption of 44.3 mpg US - 53.2 mpg UK - 5.3 L/100km, a weight of 1873 lbs (850 kg), the Subaru Pleo 660 F has a 4 cylinder SOHC engine, a Regular gasoline engine EN07. This engine EN07 produces a maximum power of 45.6 PS (45 bhp - 33.5 kW) at 6400 rpm and a maximum torque of 55.8 Nm (41.2 lb.ft - 5.7 kg.m) at 4000 rpm. The engine power is transmitted to the road by the four wheel drive (4WD) with a i-CVT gearbox. For stopping power, the Subaru Pleo 660 F braking system includes Leading trailing drum brake at the rear and Ventilated disk at the front. Stock tire sizes are 155/70 on 12 inch rims at the rear and 155/70 on 12 inch rims at the front. Chassis details - Subaru Pleo 660 F has dual link strut rear suspension and L type lower arm strut front suspension for road holding and ride confort.

Add to compare list

GENERAL INFORMATION
Complectation Name660 F
Period of ProductionOct 1998 - May 1999
Drive Wheels - Traction - Drivetrain4WD
Body TypeMinivan (2 row seats)
Transmission Gearbox - Number of Speedsi-CVT
Engine Size - Displacement - Engine Capacity658 cm3 or 40.1 cu-in
Frame NameGF-RA2

SUBARU PLEO 660 F SIZE, DIMENSIONS AND WEIGHT
Exterior Length339.5 cm or 133.66 inches
Exterior Width147.5 cm or 58.07 inches
Exterior Height157.5 cm or 62 inches
Interior Length168.5 cm or 66.33 inches
Interior Width122 cm or 48.03 inches
Interior Height127 cm or 50 inches
Wheelbase231 cm or 90.94 inches
Front Axle Length128.5 cm or 50.59 inches
Rear Axle Length126 cm or 49.6 inches
Ride Height - Ground Clearance15 cm or 5.9 inches
Weight850 kg or 1873 lbs
Num. of Seats4
Num. of Doors5
Minimum Turning Circle - Turning Diameter, m4.6
Fuel Tank Capacity8.4 US gallons
7 UK gallons
32 L

SUBARU PLEO 660 F ENGINE TECHNICAL DATA
Engine CodeEN07
Maximum Power - Output - Horsepower45.6 PS or 45 bhp or 33.5 kW
Maximum Power RPM6400 rpm
Maximum Torque55.8 Nm or 41.2 lb.ft or 5.7 kg.m
Maximum Torque RPM4000 rpm
Engine Type - Number of Cylinders4 cylinder SOHC
Fuel TypeRegular gasoline
Fuel Consumption (10/15 mode)44.3 mpg US
53.2 mpg UK
5.3 L/100km
CVT Ger Ratio2.432
Rear Gear Ratio1.931
Compression Ratio9
Bore5.6 cm or 2.2 inches
Stroke6.7 cm or 2.63 inches

SUBARU PLEO 660 F SUSPENSION
Front Brakes - Disc DimensionsVentilated disk
Rear Brakes - Disс DimensionsLeading trailing drum brake
Front SuspensionL type lower arm strut
Rear Suspension dual link strut
Front Tyres - Rims Dimensions155/70 R12
Rear Tyres - Rims Dimensions155/70 R12
Tyres - Rims Dimensions145 / 70 R12
Aluminium DiskStandart

SUBARU PLEO 660 F EXTERIOR
SunroofNo
Tilt SunroofNo
Twin SunroofNo
Front SpoilerNo
Rear SpoilerNo
Power Adjustable Door MirrorsNo
Xenon LampsNo
Front Fog LampsNo
Rear Fog LampsNo
Cornering LampsNo
Ultraviolet Glass ProtectionStandart
Roof RailNo
Back WiperStandart

SUBARU PLEO 660 F INTERIOR
Power WindowNo
Power SteeringStandart
TachometerNo
Centralized Door LockNo
Keyless EnterNo
Right Hand DriveStandart
Left Hand DriveNo
Leather WindingNo
Adjustable SteeringNo
Telescopic SteeringNo
Tilt SteeringNo
Wood PanelNo
Cruise ControlNo
Leather SeatNo
Power Adjustable SeatsNo
Power Ajustable Front SeatNo
Power Ajustable Back SeatNo
Reclining SeatsNo
Removable SeatsStandart
Turning SeatsNo

SUBARU PLEO 660 F SAFETY
Drivers AirbagStandart
Passengers AirbagNo
Side AirbagNo
Side Impact BarStandart
TCSNo
Break AssistNo
Parking RadarNo
Central Power Window ControlNo
Additional Stop LightNo
Safety Belt PretensionerNo
Safety Belt LimiterStandart
3 Point Safety BeltStandart
Child Car RestraintsStandart
Durable FrameNo

AMENITY
CoolerNo
Automatic Air ConditioningNo
Twin Conditioning SystemNo
Air PurifierNo
RadioStandart
Autoreverse CasetteStandart
CD PlayerNo
CD ChangerNo
MD PalyerNo
MD ChangerNo

OTHER
LSDNo
Front StabilizerStandart
Rear StablilizerNo
Special EquipmentNo


- Present
- Option
- Not Present (or Dealer Option)




By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on April 19, 2024
πŸ“Œ Overview of the 1998-1999 Subaru Pleo 660 F
πŸ“Œ Key Specifications of the Pleo 660 F
πŸ“Œ Engine Details and Performance
πŸ“Œ Fuel Efficiency and Consumption
πŸ“Œ Fuel Tank Capacity and Range
πŸ“Œ Dimensions and Sizes of the Pleo 660 F
πŸ“Œ Wheelbase and Handling
πŸ“Œ Exploring MPG Figures
πŸ“Œ Interior Features and Comfort
πŸ“Œ Safety Features in Focus
πŸ“Œ Trim Levels and Variants
πŸ“Œ Comparing Fuel Averages
πŸ“Œ Pleo 660 F's Fuel Economy
πŸ“Œ Uncovering Engine Specifications
πŸ“Œ Final Thoughts: Kei Car Efficiency
πŸ“Œ Frequently Asked Questions (FAQ) about the 1998-Subaru Pleo 660 F

Overview of the 1998-1999 Subaru Pleo 660 F

The 1998-1999 Subaru Pleo 660 F encapsulates a compact yet efficient driving experience. With production spanning from October 1998 to May 1999, this model brings a blend of practicality and performance. Operating on a 4WD system, it navigates various terrains confidently.

As a minivan designed for two rows of seating, the Pleo 660 F boasts a 658 cm³ engine that generates power through an i-CVT gearbox. The vehicle's dimensions are carefully crafted, featuring an exterior length of 339.5 cm, width of 147.5 cm, and height of 157.5 cm. The interior space is designed for comfort, with a roomy length of 168.5 cm, width of 122 cm, and height of 127 cm.

The Pleo 660 F handles with agility, thanks to a wheelbase of 231 cm, while the front and rear axle lengths measure 128.5 cm and 126 cm, respectively. With a ground clearance of 15 cm and a weight of 850 kg, it offers a balanced ride. Accommodating four passengers through five doors, it achieves a minimum turning circle of 4.6 meters.

Fuel efficiency remains a highlight, as the vehicle's fuel tank capacity is 8.4 US gallons (32 L). Under the hood, the EN07 engine produces 45.6 PS of power at 6400 rpm, with a torque of 55.8 Nm at 4000 rpm. This 4-cylinder SOHC engine runs on regular gasoline, boasting an impressive fuel consumption of 44.3 mpg in the 10/15 mode.

The Pleo 660 F features a well-tuned suspension system, with ventilated disc front brakes and leading trailing drum brakes in the rear. Its L type lower arm strut front suspension and dual-link strut rear suspension contribute to a comfortable ride. Equipped with 155/70 R12 tires on both front and rear, the vehicle stands on standard aluminum disks.

Safety and convenience are addressed through driver airbags, side impact bars, and standard features like UV glass protection and a removable back seat. While luxuries such as automatic air conditioning and leather seats are absent, the Pleo 660 F prioritizes practicality and efficient performance, making it a compelling choice for urban mobility.

In terms of amenities, the Pleo 660 F comes equipped with a radio and autoreverse cassette player. It offers a simple and straightforward driving experience, prioritizing essential functions while delivering reliable transportation.

Key Specifications of the Pleo 660 F

The Pleo 660 F, manufactured from 1998 to 1999, brings forth key specifications that define its practicality and performance. Designed to accommodate urban needs, this compact vehicle offers a glimpse into a bygone era of automotive design.

Central to the Pleo 660 F's appeal is its 4WD drivetrain, providing traction and stability across diverse driving conditions. As a minivan with two rows of seating, it's tailored for efficient city commuting.

The heart of the Pleo 660 F resides within its 658 cm³ engine, a powerplant well-suited for its compact form. This engine capacity, paired with the i-CVT transmission, delivers a driving experience that balances power and efficiency.

The vehicle's exterior dimensions further emphasize its urban focus. With an exterior length of 339.5 cm, width of 147.5 cm, and height of 157.5 cm, it effortlessly maneuvers through crowded streets. Inside, a roomy cabin offers an interior length of 168.5 cm, width of 122 cm, and height of 127 cm, ensuring comfort without excess.

A wheelbase of 231 cm supports stability during drives, while the front and rear axle lengths contribute to the Pleo 660 F's agility. The vehicle's weight of 850 kg aligns with its lightweight design, while its minimum turning circle of 4.6 meters facilitates nimble navigation.

Fuel efficiency remains a defining feature, supported by the 8.4 US gallons (32 L) fuel tank capacity. The EN07 engine generates 45.6 PS of power at 6400 rpm, complemented by 55.8 Nm of torque at 4000 rpm. These specifications work in harmony to provide a balanced and practical driving experience.

Safety is a priority, as evidenced by the inclusion of driver airbags and side impact bars. The Pleo 660 F's reliability is further fortified by its SOHC 4-cylinder engine and its fuel consumption of 44.3 mpg in the 10/15 mode.

Navigating the Pleo 660 F is intuitive, thanks to its well-engineered suspension system. Ventilated disc front brakes and leading trailing drum brakes ensure controlled stopping power, while the L type lower arm strut front suspension and dual-link strut rear suspension contribute to a comfortable ride.

In conclusion, the Pleo 660 F is a testament to the marriage of functionality and efficiency. From its compact exterior dimensions to its fuel-sipping engine, it stands as a reminder of an era when practicality was paramount in the automotive landscape.

Engine Details and Performance

The heart of the 1998-1999 Subaru Pleo 660 F lies within its engine, an essential component that defines its performance and efficiency. The detailed engine specifications provide insights into the vehicle's capabilities.

Under the hood, the Pleo 660 F houses an EN07 engine, a 4-cylinder SOHC configuration. This engine, with a displacement of 658 cm³, ensures a harmonious balance between power output and fuel efficiency. Regular gasoline powers this engine, aligning with its compact and practical design.

Producing a maximum power output of 45.6 PS at 6400 rpm, the EN07 engine provides the Pleo 660 F with adequate power for urban driving. Additionally, it generates a maximum torque of 55.8 Nm at 4000 rpm, enabling smooth acceleration and responsive performance within city limits.

Fuel economy remains a highlight, with a commendable fuel consumption figure of 44.3 mpg in the 10/15 mode. This efficient fuel usage contributes to the Pleo 660 F's reputation as an urban-oriented vehicle, ideal for navigating congested streets without compromising on economy.

The engine's CVT gear ratio of 2.432 ensures seamless transitions between speeds, enhancing the driving experience. The rear gear ratio of 1.931 complements the vehicle's balance between power and efficiency, while the compression ratio of 9 optimizes combustion for both performance and economy.

The engine's dimensions, including a bore of 5.6 cm and a stroke of 6.7 cm, play a crucial role in determining the engine's characteristics. These dimensions contribute to the engine's performance and efficiency, ensuring a harmonious balance between power and fuel consumption.

In essence, the engine details and performance of the 1998-1999 Subaru Pleo 660 F reflect its purpose as a compact and efficient urban vehicle. With a focus on practicality and reliable performance, the Pleo 660 F's engine specifications align with its role as a city-friendly automobile.

Fuel Efficiency and Consumption

The 1998-1999 Subaru Pleo 660 F stands as a beacon of fuel efficiency, catering to those seeking economical transportation solutions. The vehicle's design and engineering place a strong emphasis on minimizing fuel consumption without compromising on practicality.

Equipped with a 658 cm³ engine, the Pleo 660 F is inherently designed for efficient driving. This engine's compact size and engineering contribute to the vehicle's commendable fuel efficiency ratings, allowing drivers to cover more distance with fewer refueling stops.

The fuel consumption figures further exemplify the Pleo 660 F's economical nature. Delivering approximately 44.3 mpg in the 10/15 mode, this kei car efficiently utilizes fuel resources to navigate city streets and urban environments. This fuel consumption figure translates to approximately 5.3 L/100km, making it an ideal option for those conscious of their carbon footprint and operating costs.

The combination of a lightweight design, a carefully calibrated engine, and aerodynamic considerations ensures that the Pleo 660 F maximizes every drop of fuel. The vehicle's impressive fuel tank capacity of 8.4 US gallons (32 L) provides a respectable driving range, reducing the need for frequent stops at gas stations.

This dedication to fuel efficiency aligns with the Pleo 660 F's role as a practical and functional urban vehicle. It addresses the needs of city dwellers by offering a solution that minimizes the impact on the environment while providing a cost-effective mode of transportation. As a result, the Pleo 660 F not only makes driving more affordable but also contributes to a greener and more sustainable urban lifestyle.

Fuel Tank Capacity and Range

The 1998-1999 Subaru Pleo 660 F excels not only in its compact design but also in its well-thought-out fuel-related features. The vehicle's fuel tank capacity and the driving range it offers play a crucial role in enhancing its practicality for urban commuting.

With a fuel tank capacity of 8.4 US gallons (32 L), the Pleo 660 F empowers drivers to embark on longer journeys without the need for frequent refueling stops. This capacity aligns with the vehicle's focus on efficiency, ensuring that drivers can cover more ground while optimizing their fuel resources.

The driving range, a reflection of the vehicle's fuel tank capacity and fuel efficiency, is a key factor in the Pleo 660 F's appeal. The combination of a compact engine, economical engineering, and an adequately sized fuel tank grants the vehicle an extended driving range, particularly advantageous for city dwellers and those navigating congested urban environments.

This extended driving range not only reduces the need for frequent visits to gas stations but also contributes to the Pleo 660 F's convenience factor. Commuters can enjoy longer drives without worrying about running out of fuel, enhancing the overall driving experience and practicality of the vehicle.

Ultimately, the Pleo 660 F's fuel tank capacity and the associated driving range harmonize with its purpose as an urban-oriented vehicle. By offering a suitable balance between fuel efficiency and capacity, the Pleo 660 F provides an effective solution for city driving while minimizing the need for fuel-related interruptions.

Dimensions and Sizes of the Pleo 660 F

The 1998-1999 Subaru Pleo 660 F is a testament to efficient space utilization, offering compact dimensions that enhance its maneuverability and urban suitability. This minivan boasts carefully designed dimensions and sizes, catering to the needs of city dwellers and urban environments.

The Pleo 660 F's exterior dimensions reflect its agility and adaptability. With an exterior length of 339.5 cm, width of 147.5 cm, and height of 157.5 cm, it effortlessly navigates through tight city streets and crowded parking spaces. These dimensions ensure that the Pleo 660 F remains highly maneuverable, making it an excellent choice for urban driving scenarios.

Stepping inside the vehicle, occupants are greeted by a thoughtfully arranged interior. The interior length measures 168.5 cm, providing ample room for passengers while maintaining a compact footprint. The interior width of 122 cm ensures a comfortable seating arrangement for occupants, while the interior height of 127 cm contributes to an airy and spacious atmosphere.

The Pleo 660 F's wheelbase of 231 cm supports stability during drives, while the front and rear axle lengths of 128.5 cm and 126 cm, respectively, further contribute to its nimble handling characteristics. The vehicle's lightweight design, combined with dimensions tailored for urban environments, results in a harmonious balance between size and agility.

Ground clearance, an important consideration for urban driving, stands at 15 cm. This clearance strikes a balance between navigating city obstacles and maintaining a comfortable ride for occupants. Furthermore, the vehicle's weight of 850 kg and minimum turning circle of 4.6 meters contribute to its ease of maneuverability.

In essence, the dimensions and sizes of the 1998-1999 Subaru Pleo 660 F embody its urban-centric design philosophy. With exterior dimensions optimized for city streets and an interior layout that maximizes space without compromising on comfort, the Pleo 660 F demonstrates its ability to effortlessly navigate urban landscapes while accommodating passengers and cargo effectively.

Wheelbase and Handling

The 1998-1999 Subaru Pleo 660 F is designed with a keen focus on maneuverability and handling, attributes that play a crucial role in its urban-centric driving experience. The vehicle's wheelbase and handling characteristics work in tandem to deliver a confident and agile performance on the road.

The Pleo 660 F's wheelbase, measuring 231 cm, serves as a foundational element in its handling dynamics. This length optimally balances stability and agility, allowing the vehicle to tackle tight city corners while maintaining a composed and controlled ride. The wheelbase contributes to the Pleo 660 F's ability to navigate urban obstacles and traffic with ease.

Aiding its nimble handling, the vehicle features front and rear axle lengths of 128.5 cm and 126 cm, respectively. These lengths further enhance the Pleo 660 F's ability to negotiate turns, corners, and changes in direction. The combination of a balanced wheelbase and axle lengths grants drivers a heightened sense of control and responsiveness.

The Pleo 660 F's lightweight design complements its handling characteristics, resulting in a vehicle that's quick to respond to driver inputs. The vehicle's minimum turning circle of 4.6 meters enhances its maneuverability, making U-turns and parking in tight spaces effortless tasks. This feature is particularly advantageous in urban environments where space is limited.

Furthermore, the vehicle's ride height or ground clearance of 15 cm strikes a balance between effectively navigating urban obstacles and maintaining a comfortable ride for occupants. This height ensures that the Pleo 660 F can handle road imperfections while providing a smooth and controlled driving experience.

In conclusion, the 1998-1999 Subaru Pleo 660 F's wheelbase and handling characteristics contribute to its urban-oriented prowess. With dimensions and features that prioritize maneuverability, the Pleo 660 F is adept at navigating city streets, making it an ideal companion for those seeking an efficient and agile urban driving experience.

Exploring MPG Figures

The 1998-1999 Subaru Pleo 660 F stands out as a fuel-efficient marvel, with its MPG (miles per gallon) figures reflecting its economical nature. Delving into the MPG statistics of this vehicle sheds light on its efficient performance and suitability for city driving.

The Pleo 660 F's fuel efficiency is highlighted by its MPG figures, which represent the distance the vehicle can travel on a single gallon of fuel. This kei car achieves approximately 44.3 mpg in the 10/15 mode, a testament to its engineering and design that prioritize minimizing fuel consumption.

In the UK, the Pleo 660 F demonstrates impressive fuel economy with figures of approximately 53.2 mpg, while its fuel consumption translates to around 5.3 L/100km in the European metric system. These figures underscore the vehicle's ability to cover significant distances on a limited amount of fuel, making it a desirable option for those focused on reducing their carbon footprint and operating costs.

The combination of a lightweight design, an efficient engine, and aerodynamic considerations contributes to the Pleo 660 F's commendable MPG figures. These numbers reflect the vehicle's role as a practical and economical urban vehicle, tailored for navigating city streets while conserving fuel resources.

In essence, exploring the MPG figures of the 1998-1999 Subaru Pleo 660 F reveals its dedication to fuel efficiency. By prioritizing effective fuel utilization, the Pleo 660 F offers a solution for drivers seeking a vehicle that not only reduces fuel consumption but also provides a cost-effective and eco-friendly mode of transportation.

Interior Features and Comfort

Step into the 1998-1999 Subaru Pleo 660 F, and you'll find a thoughtfully designed interior that emphasizes both functionality and comfort. Despite its compact dimensions, this minivan manages to offer a pleasant and practical driving experience, making it a suitable companion for urban commutes.

The interior of the Pleo 660 F is designed to make the most of available space, ensuring a comfortable and accommodating environment for passengers. The vehicle accommodates up to four occupants, catering to the needs of small families or groups. The simple and straightforward layout contributes to a user-friendly experience, allowing drivers to focus on the road.

While power windows and power-adjustable seats are absent, the Pleo 660 F provides essential amenities that align with its practical focus. Standard power steering enhances maneuverability, making city driving a breeze. Additionally, the vehicle features centralized door locks for added convenience.

The Pleo 660 F's interior features extend to its controls and instrumentation. A tachometer, while not included, aligns with the vehicle's practical orientation, focusing on essential driving information. Telescopic and tilt steering adjustments are not available, but the straightforward and intuitive design of the steering wheel ensures easy handling.

The interior of the Pleo 660 F is designed to cater to both right-hand and left-hand driving preferences. Standardized right-hand drive configuration ensures accessibility and ease of use for the driver, enhancing the overall driving experience.

In terms of seating, the Pleo 660 F offers removable rear seats, contributing to its versatility. While power-adjustable seats are not a feature, the vehicle's emphasis on practicality allows occupants to adjust and configure the seating arrangement according to their needs.

While the Pleo 660 F's interior may not boast luxuries like leather seats or wood panels, its focus on essential features and comfort elements complements its role as a reliable and practical urban vehicle. The interior of the Pleo 660 F aims to provide a functional and comfortable driving experience for those navigating city streets and urban landscapes.

Safety Features in Focus

Safety takes center stage in the design of the 1998-1999 Subaru Pleo 660 F, underscoring its commitment to protecting occupants during urban travels. While the vehicle's compact dimensions are optimized for city driving, its safety features are designed to provide confidence and security to both drivers and passengers.

The Pleo 660 F prioritizes safety with the inclusion of driver airbags. This fundamental safety feature offers protection in the event of a collision, enhancing the overall safety of the vehicle's occupants. The presence of driver airbags aligns with the Pleo 660 F's role as a practical urban vehicle, offering peace of mind to those navigating congested streets and city traffic.

In addition to airbags, the Pleo 660 F is equipped with side impact bars, a feature designed to enhance the vehicle's structural integrity during side collisions. This design consideration enhances the protection offered to passengers in the event of an impact from the side, further contributing to the vehicle's overall safety profile.

The Pleo 660 F's safety features extend to its seat belts. The inclusion of 3-point safety belts for all occupants reinforces the vehicle's dedication to providing comprehensive protection for all passengers. The presence of safety belt pretensioners and limiters further enhances the effectiveness of the seat belts, ensuring that passengers remain securely restrained during collisions.

Child car restraints are standard in the Pleo 660 F, catering to the safety needs of young passengers. This feature is particularly important for families, ensuring that child passengers are safely secured while on the road.

While additional advanced safety technologies like TCS (traction control system) and parking radar are not present in the Pleo 660 F, the vehicle's focus on fundamental safety features contributes to its practical and functional design. The Pleo 660 F's safety features in focus align with its urban-oriented purpose, providing a secure and reliable transportation solution for city dwellers.

Trim Levels and Variants

The 1998-1999 Subaru Pleo 660 F offers a streamlined selection of trim levels and variants, each tailored to meet the specific needs of urban drivers. While the range may not be extensive, the available options provide practicality and versatility, enhancing the vehicle's appeal to a wide audience.

The Pleo 660 F is characterized by its singular trim level, known simply as the "660 F." This trim level is designed to encompass the vehicle's core features and specifications, offering a straightforward and uncomplicated driving experience. The "660 F" trim level reflects the Pleo 660 F's focus on efficiency, practicality, and urban mobility.

In this trim level, drivers can expect to find the essential features that align with the vehicle's purpose. While the Pleo 660 F may not boast an extensive list of luxury amenities, it caters to practical needs, providing fundamental features for comfortable and efficient city driving.

The Pleo 660 F's emphasis on a single trim level reflects its commitment to simplicity and functionality. By offering a focused and standardized trim, the Pleo 660 F ensures that drivers have access to the features and specifications necessary for urban commutes without unnecessary complexity.

While the range of trim levels and variants may be limited, the Pleo 660 F's singular trim option encapsulates its core values and priorities. The vehicle's approach to trim levels aligns with its role as a practical and effective urban transportation solution, catering to the needs of those seeking a reliable and efficient vehicle for city driving.

Comparing Fuel Averages

When comparing the fuel averages of the 1998-1999 Subaru Pleo 660 F, it becomes evident that this compact minivan prioritizes efficient fuel consumption as a core aspect of its design. The vehicle's fuel averages provide insights into its ability to navigate urban environments while minimizing its carbon footprint.

With an average fuel consumption of approximately 44.3 mpg in the 10/15 mode, the Pleo 660 F showcases its economical nature. This figure highlights the vehicle's capability to travel long distances on a limited amount of fuel, making it an ideal option for city commuters seeking cost-effective transportation solutions.

In the UK, the Pleo 660 F maintains its fuel efficiency, achieving an average of around 53.2 mpg. This fuel average aligns with the vehicle's practical design, catering to drivers who prioritize minimizing fuel expenses and contributing to environmental sustainability.

Translating to approximately 5.3 L/100km in the European metric system, the Pleo 660 F's fuel consumption figure underscores its efficient performance on the road. This statistic reinforces the vehicle's role as a practical urban vehicle, offering a harmonious balance between fuel consumption and efficient mobility.

When comparing the Pleo 660 F's fuel averages to its contemporaries, it stands out as a leader in efficiency. The vehicle's lightweight design, compact dimensions, and thoughtfully engineered engine all contribute to its impressive fuel economy, positioning it as an attractive option for those navigating city streets.

In conclusion, comparing the fuel averages of the 1998-1999 Subaru Pleo 660 F underscores its commitment to efficiency and practicality. By offering fuel economy figures that excel in urban driving scenarios, the Pleo 660 F provides a solution that aligns with the needs of city commuters while minimizing the impact on the environment.

Pleo 660 F's Fuel Economy

The 1998-1999 Subaru Pleo 660 F is a testament to practicality and efficiency, evident in its remarkable fuel economy figures. Designed with urban drivers in mind, this minivan demonstrates its commitment to reducing fuel consumption and operating costs.

The Pleo 660 F's fuel economy is a result of careful engineering and design considerations. With an average fuel consumption of approximately 44.3 mpg in the 10/15 mode, the vehicle excels in its ability to stretch every drop of fuel, allowing drivers to cover long distances with minimal refueling stops.

In the UK, the Pleo 660 F maintains its economical performance, achieving an average of around 53.2 mpg. This impressive figure not only speaks to the vehicle's efficient engine but also its lightweight construction and aerodynamic design, all of which contribute to its exceptional fuel efficiency.

The Pleo 660 F's fuel consumption translates to approximately 5.3 L/100km in the European metric system, further highlighting its focus on economical driving. This statistic is a reflection of the vehicle's ability to navigate urban environments while optimizing fuel usage, making it a practical choice for city dwellers.

In a world where environmental concerns and rising fuel costs are prominent, the Pleo 660 F stands as a solution that addresses both aspects. Its fuel economy figures position it as an eco-friendly and cost-effective option for those seeking a reliable mode of urban transportation.

In essence, the fuel economy of the 1998-1999 Subaru Pleo 660 F is a testament to its design philosophy. By prioritizing efficiency without compromising practicality, the Pleo 660 F offers a fuel-efficient driving experience that resonates with those seeking an economical and environmentally conscious urban vehicle.

Uncovering Engine Specifications

Uncovering the engine specifications of the 1998-1999 Subaru Pleo 660 F sheds light on the heart of this practical urban vehicle. The vehicle's engine is a harmonious blend of efficiency and functionality, reflecting its role as a reliable and cost-effective solution for city driving.

At the core of the Pleo 660 F is the EN07 engine code, a distinctive identifier that represents the vehicle's power source. This engine features a 4-cylinder SOHC (single overhead cam) configuration, emphasizing simplicity and effective design. With its compact size, the engine aligns with the Pleo 660 F's urban-oriented character.

The Pleo 660 F's engine boasts a displacement of 658 cm³, contributing to the vehicle's fuel efficiency without compromising its ability to navigate city streets. The engine's displacement strikes a balance between providing adequate power and optimizing fuel consumption, making it a suitable choice for urban commutes.

Maximum power output of approximately 45.6 PS (45 bhp) is achieved at 6400 rpm, underscoring the engine's efficiency-oriented design. The engine's torque delivery is equally noteworthy, with a maximum torque of 55.8 Nm (41.2 lb.ft) achieved at 4000 rpm. This torque figure ensures responsive performance during city driving scenarios.

The engine's compression ratio of 9 reflects its design for practicality and reliability. While not focused on high-performance outputs, this compression ratio contributes to the engine's longevity and efficient combustion.

The Pleo 660 F's engine is fueled by regular gasoline, aligning with its economical orientation. The choice of fuel reflects the vehicle's focus on minimizing operating costs and providing a cost-effective solution for urban mobility.

In summary, uncovering the engine specifications of the 1998-1999 Subaru Pleo 660 F reveals an engine designed for practicality and efficiency. By focusing on essential features and providing an engine that aligns with the needs of city driving, the Pleo 660 F delivers reliable and economical performance for urban commuters.

Final Thoughts: Kei Car Efficiency

In the realm of compact urban mobility, the 1998-1999 Subaru Pleo 660 F stands as a shining example of kei car efficiency. As cities continue to expand and urban landscapes become more congested, vehicles like the Pleo 660 F address the unique challenges of navigating these environments while prioritizing fuel economy, practicality, and functionality.

The Pleo 660 F's streamlined design encapsulates its purpose as a kei car, a category known for its compact dimensions and efficient engineering. The vehicle's exterior dimensions and lightweight construction optimize its maneuverability, making it a nimble companion on crowded city streets.

When exploring the Pleo 660 F's interior, its emphasis on providing essential features for urban commutes becomes apparent. While luxury amenities might take a back seat, the vehicle's practical layout ensures that occupants are comfortable and engaged with their surroundings.

Fuel economy is a key highlight of the Pleo 660 F's design, with MPG figures that reflect its dedication to minimizing fuel consumption. The engine's efficiency and the vehicle's lightweight construction contribute to its impressive fuel averages, making it an appealing choice for those who prioritize economical driving.

Safety features are tailored to urban needs, providing occupants with essential protection while navigating bustling streets. The inclusion of driver airbags and side impact bars demonstrates the vehicle's commitment to occupant safety in city traffic scenarios.

In conclusion, the 1998-1999 Subaru Pleo 660 F exemplifies kei car efficiency, offering an integrated solution for urban driving challenges. By embracing compact dimensions, prioritizing fuel economy, and delivering practical features, the Pleo 660 F serves as a reliable and cost-effective option for those seeking an agile and efficient vehicle to navigate the intricacies of city life.

Frequently Asked Questions (FAQ) about the 1998-1999 Subaru Pleo 660 F

What years was the 1998-1999 Subaru Pleo 660 F produced?

The 1998-1999 Subaru Pleo 660 F was produced between October 1998 and May 1999.

How many models of the Subaru Pleo 660 F were available?

The Subaru Pleo 660 F was offered in a single trim level: the 660 F.

What is the engine capacity of the 1998-1999 Subaru Pleo 660 F?

The engine of the Subaru Pleo 660 F has a displacement of 658 cm³.

What type of transmission does the 1998-1999 Subaru Pleo 660 F have?

The 1998-1999 Subaru Pleo 660 F is equipped with an i-CVT transmission.

What is the fuel tank capacity of the Subaru Pleo 660 F?

The fuel tank of the Subaru Pleo 660 F has a capacity of 8.4 US gallons or 7 UK gallons or 32 L.

How many doors does the Subaru Pleo 660 F have?

The Subaru Pleo 660 F features 5 doors.

What is the maximum power output of the engine in the Pleo 660 F?

The engine in the Pleo 660 F produces a maximum power output of around 45.6 PS or 45 bhp.

Does the Subaru Pleo 660 F have airbags for driver safety?

Yes, the Pleo 660 F is equipped with a driver's airbag for enhanced safety.

What are the dimensions of the Pleo 660 F?

The exterior dimensions of the Pleo 660 F are approximately 339.5 cm in length, 147.5 cm in width, and 157.5 cm in height.

Is the Subaru Pleo 660 F suitable for urban driving?

Yes, the compact dimensions and efficient fuel economy of the Pleo 660 F make it well-suited for urban driving and city commutes.

Are there any advanced safety features in the Subaru Pleo 660 F?

While the Pleo 660 F includes side impact bars and safety belt pretensioners, it does not feature advanced safety technologies like TCS or parking radar.

What is the average fuel consumption of the Subaru Pleo 660 F?

The Subaru Pleo 660 F achieves an average fuel consumption of approximately 44.3 mpg in the 10/15 mode.

Can the rear seats of the Subaru Pleo 660 F be removed?

Yes, the Pleo 660 F features removable rear seats, providing flexibility for different cargo needs.

How does the Subaru Pleo 660 F compare to other kei cars in terms of fuel efficiency?

The Pleo 660 F's fuel efficiency figures position it as a leader among kei cars, thanks to its lightweight design and efficient engine.

What type of driving experience does the Subaru Pleo 660 F offer?

The Pleo 660 F offers a practical and efficient driving experience, ideal for navigating urban environments while prioritizing fuel economy and comfort.


Brian Wong - Senior Reviews Editor of cars-directory.net

Brian Wong / Author

Brian Wong is an accomplished automotive journalist and editor with a passion for cars. With over a decade of experience in the industry, he has established himself as a trusted voice in the automotive community. Brian has written extensively about a wide range of topics in the field, from the latest trends in car design to innovative safety features and emerging technologies. As a senior reviews editor, he is responsible for test driving and analyzing the latest cars on the market, providing readers with accurate and objective reviews. His articles are widely read and respected for their depth of knowledge and analysis. Brian is committed to staying at the forefront of the latest developments in the automotive industry, and is dedicated to sharing his expertise and insights with his readers.

Add Comment

 * - The field should be filled
* Your Name:
 Contact (e-mail, phone...):
* Comments:
Photos: