2000 Subaru Pleo 660 F Specs

OVERVIEW

With a fuel consumption of 50 mpg US - 60.1 mpg UK - 4.7 L/100km, a weight of 1763 lbs (800 kg), the Subaru Pleo 660 F has a water cooling 4 cycle 4 cylinder SOHC engine, a Regular gasoline engine EN07. This engine EN07 produces a maximum power of 46.6 PS (46 bhp - 34.3 kW) at 6000 rpm and a maximum torque of 57.8 Nm (42.6 lb.ft - 5.9 kg.m) at 5200 rpm. The engine power is transmitted to the road by the front wheel drive (FF) with a i-CVT gearbox. For stopping power, the Subaru Pleo 660 F braking system includes Leading trailing drum brake at the rear and Ventilated disk at the front. Stock tire sizes are 155/65 on 13 inch rims at the rear and 155/65 on 13 inch rims at the front. Chassis details - Subaru Pleo 660 F has dual link strut independent suspension rear suspension and L type lower arm strut independent front suspension for road holding and ride confort.

Add to compare list

- Present
- Option
- Not Present (or Dealer Option)

• Search Car Specs
• Other Pleo Specs Database

More photos Subaru Pleo

By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on April 23, 2024

Introduction to the 2000-2001 Subaru Pleo 660 F

The 2000-2001 Subaru Pleo 660 F was a notable addition to Subaru's lineup during this era. As a compact and fuel-efficient offering, it catered to the needs of urban drivers seeking a practical and economical driving solution. Produced between October 2000 and September 2001, the Pleo 660 F came equipped with a front-wheel-drive (FF) drivetrain, making it suitable for city driving and maneuverability.

In terms of body type, the Pleo 660 F was classified as a minivan with two rows of seats, accommodating up to four passengers comfortably. Its compact dimensions made it ideal for navigating crowded streets and tight parking spaces.

Under the hood, the Pleo 660 F featured a 658 cm³ engine, with an engine code of EN07. This compact powerplant delivered 46.6 PS (46 bhp) or 34.3 kW of maximum power at 6000 rpm and 57.8 Nm of torque at 5200 rpm. The engine operated on regular gasoline and adhered to G-LEV emissions standards.

One of the standout features of the Pleo 660 F was its impressive fuel efficiency. With a fuel consumption rating of 50 mpg US (60.1 mpg UK) or 4.7 L/100km in the 10/15 mode, this Subaru model offered excellent mileage, making it an economical choice for daily commuting.

The Pleo 660 F came equipped with an i-CVT (Continuously Variable Transmission) gearbox, which contributed to its smooth and efficient operation. The CVT gear ratio was 2.432, enhancing the overall driving experience.

When it came to size and dimensions, the Pleo 660 F had a compact footprint. Its exterior measured 339.5 cm in length, 147.5 cm in width, and 157.5 cm in height. The wheelbase stood at 231 cm, and the vehicle boasted a ground clearance of 15 cm. These dimensions, coupled with a turning circle of 4.6 meters, made the Pleo 660 F highly maneuverable in urban settings.

Additionally, the Pleo 660 F featured a well-balanced suspension system with front ventilated disc brakes and leading trailing drum brakes at the rear. The front suspension utilized an L type lower arm strut independent design, while the rear suspension employed a dual-link strut independent setup.

Overall, the 2000-2001 Subaru Pleo 660 F offered a practical and efficient transportation solution for urban dwellers, with its compact size, fuel efficiency, and comfortable seating for four passengers. Its economical and eco-friendly performance made it a noteworthy option in its class during its production period.

Engine Specifications of the Pleo 660 F

The heart of the 2000-2001 Subaru Pleo 660 F lay beneath its compact hood, where a capable engine powered this urban-friendly minivan. The Pleo 660 F was equipped with an engine code-named EN07, and it showcased its efficiency and performance through a series of specifications.

This engine, with a displacement of 658 cm³, was designed for compactness and fuel economy, aligning perfectly with the needs of city drivers. Its four-cylinder, single overhead camshaft (SOHC) configuration featured water cooling and operated on a four-cycle principle. This setup delivered not only reliability but also a balanced power-to-weight ratio that contributed to the Pleo 660 F's overall efficiency.

The engine generated a maximum power output of 46.6 PS (46 bhp or 34.3 kW) at 6000 rpm, providing ample power for city driving and daily commutes. Additionally, it produced a maximum torque of 57.8 Nm (42.6 lb.ft or 5.9 kg.m) at 5200 rpm, enhancing the vehicle's responsiveness.

Operating on regular gasoline and conforming to G-LEV (Green Low Emission Vehicle) standards, the Pleo 660 F's engine struck a balance between performance and environmental responsibility. With a compression ratio of 9, this engine efficiently utilized fuel while minimizing emissions.

The Pleo 660 F was known for its impressive fuel efficiency, achieving a fuel consumption rating of 50 mpg US (60.1 mpg UK) or 4.7 L/100km in the 10/15 mode. This frugality in fuel consumption made the Pleo 660 F an economical choice for those looking to reduce their fuel expenses.

The engine's bore measured 5.6 cm (2.2 inches), while the stroke was 6.7 cm (2.63 inches), contributing to its compact size and efficient operation. These engine specifications, combined with the vehicle's lightweight build, made the Pleo 660 F a nimble and economical option for navigating the city streets.

In summary, the engine specifications of the 2000-2001 Subaru Pleo 660 F highlighted its focus on compactness, fuel efficiency, and balanced performance. With its EN07 engine, this minivan delivered an optimal blend of power and economy, making it a practical choice for urban drivers seeking an efficient and reliable mode of transportation.

Fuel Tank Capacity of the Pleo 660 F

In understanding the capabilities of the 2000-2001 Subaru Pleo 660 F, it's crucial to consider its fuel tank capacity, a fundamental aspect of any vehicle's usability. The Pleo 660 F was designed with practicality and efficiency in mind, and its fuel tank capacity played a significant role in achieving these goals.

The Pleo 660 F's fuel tank had a capacity of 8.4 US gallons (or approximately 7 UK gallons, equivalent to approximately 32 liters). This capacity represented a balanced approach, allowing the vehicle to carry an adequate amount of fuel without compromising its compact size and weight.

The choice of an 8.4-gallon fuel tank was in line with the Pleo 660 F's emphasis on urban commuting and economical driving. This capacity offered a sufficient range for city driving, reducing the need for frequent refueling stops. With its remarkable fuel efficiency, achieving approximately 50 mpg US (60.1 mpg UK) or 4.7 L/100km in the 10/15 mode, the Pleo 660 F made the most of the fuel it carried.

The combination of a modest fuel tank capacity and impressive fuel efficiency made the Pleo 660 F a cost-effective and eco-friendly choice for city dwellers. It allowed drivers to enjoy extended drives without the constant worry of refilling the tank, contributing to a hassle-free and economical ownership experience.

In summary, the 2000-2001 Subaru Pleo 660 F featured a fuel tank capacity of 8.4 US gallons, aligning perfectly with its focus on efficient urban driving. This capacity, coupled with the vehicle's exceptional fuel economy, ensured that the Pleo 660 F could cover considerable distances between refueling stops, making it a practical and economical choice for daily commuting in the city.

Fuel Consumption and MPG Ratings

Understanding the fuel consumption and MPG (miles per gallon) ratings of the 2000-2001 Subaru Pleo 660 F is essential for assessing its efficiency and cost-effectiveness as a daily driver. This kei car was designed to excel in urban environments, and its fuel efficiency played a pivotal role in achieving that objective.

In the 10/15 mode, which simulates urban driving conditions, the Pleo 660 F boasted impressive fuel economy figures. It achieved a fuel consumption rating of approximately 50 mpg US (or about 60.1 mpg UK), translating to a remarkably low fuel consumption rate of approximately 4.7 L/100km. These figures showcased the Pleo 660 F's commitment to economical driving and its suitability for city commutes.

The vehicle's exceptional fuel efficiency was a result of several factors, including its lightweight design, aerodynamic efficiency, and the efficiency of its EN07 engine. The combination of a compact engine with advanced engineering and a continuously variable transmission (CVT) contributed to its ability to maximize fuel economy without sacrificing performance.

For urban drivers, these fuel consumption numbers were especially advantageous, as they reduced the frequency of refueling stops and kept fuel expenses in check. The Pleo 660 F's economical operation aligned perfectly with the needs of those seeking an affordable and eco-friendly mode of transportation for city living.

In summary, the 2000-2001 Subaru Pleo 660 F delivered outstanding fuel consumption and MPG ratings, with an impressive 50 mpg US (60.1 mpg UK) or 4.7 L/100km in the 10/15 mode. This efficiency, combined with its compact size and other features, made the Pleo 660 F a practical and cost-effective choice for urban drivers looking to minimize fuel costs while reducing their environmental footprint.

Dimensions and Sizes of the Pleo 660 F

The dimensions and sizes of the 2000-2001 Subaru Pleo 660 F played a crucial role in defining its practicality as a compact urban vehicle. Designed to navigate crowded city streets with ease, the Pleo 660 F featured a well-thought-out size profile.

The exterior of the Pleo 660 F measured approximately 339.5 cm (133.66 inches) in length, 147.5 cm (58.07 inches) in width, and 157.5 cm (62 inches) in height. These dimensions placed it squarely in the category of small urban vehicles, allowing it to maneuver effortlessly in tight spots and city traffic.

Inside the cabin, the Pleo 660 F offered practical space for its passengers. The interior dimensions included an interior length of about 168.5 cm (66.33 inches), an interior width of approximately 122 cm (48.03 inches), and an interior height of around 127 cm (50 inches). These dimensions provided a comfortable and ergonomic environment for occupants while maximizing the use of available space within the vehicle's compact frame.

The vehicle's wheelbase measured 231 cm (90.94 inches), contributing to stability and ride comfort. The front axle length was approximately 128.5 cm (50.59 inches), while the rear axle length was about 126 cm (49.6 inches). These measurements ensured balanced weight distribution and a smooth, controlled ride.

With a ground clearance of 15 cm (5.9 inches), the Pleo 660 F struck a practical compromise between urban driving and occasional rough roads, offering enough clearance to handle minor obstacles while maintaining a low profile for city driving.

The vehicle's weight was approximately 800 kg (1763 lbs), contributing to its nimble handling and fuel efficiency. It featured seating for four passengers across two rows and offered five doors for easy access.

Overall, the 2000-2001 Subaru Pleo 660 F's dimensions and sizes were tailored to the needs of urban drivers. Its compact exterior, coupled with a well-designed interior layout, made it a practical choice for navigating the challenges of city living while ensuring comfort and functionality for its occupants.

Wheel Specifications for the Pleo 660 F

The wheel specifications of the 2000-2001 Subaru Pleo 660 F were designed to complement its compact size and urban-focused nature. These specifications ensured both stability and maneuverability, making it an ideal choice for navigating city streets.

The Pleo 660 F was equipped with wheels that featured dimensions appropriate for its size and purpose. The front and rear tires came in the size of 155/65 R13. These tires offered a balance between grip and ride comfort, contributing to the vehicle's confident handling and smooth ride quality.

The choice of 13-inch rims was in line with the Pleo 660 F's emphasis on efficient urban driving. The smaller wheel size not only reduced rolling resistance, benefiting fuel economy, but also enhanced the vehicle's ability to negotiate tight turns and corners commonly encountered in city driving.

Additionally, the Pleo 660 F had an option for tires with dimensions of 145/70 R12, which provided a slightly different ride experience while maintaining compatibility with the vehicle's compact wheel arches.

The inclusion of standard aluminum disks further highlighted the vehicle's focus on efficiency and lightweight construction. These aluminum disks offered advantages in terms of reduced unsprung weight, contributing to improved ride comfort and handling.

In summary, the wheel specifications of the 2000-2001 Subaru Pleo 660 F were well-suited to its role as a compact and efficient urban vehicle. The choice of tire sizes and aluminum disks allowed for a harmonious balance between stability, maneuverability, and fuel efficiency, making it an ideal choice for city dwellers seeking an economical and practical mode of transportation.

Trim Levels and Generations

The 2000-2001 Subaru Pleo 660 F was available in various trim levels and represented a specific generation within the Pleo lineup. Understanding these trim levels and the generation helps provide a comprehensive view of this kei car.

Trim Levels:
The Pleo 660 F was known for its simplicity and practicality, and it offered different trim levels to cater to varying customer preferences. These trim levels included basic versions with essential features and more upscale variants that added extra comfort and convenience options.

The specific trim levels and their features may vary depending on the market and specific model year. Some common features found in various trim levels of the Pleo 660 F included air conditioning, power windows, and safety features like airbags.

Generations:
The 2000-2001 Subaru Pleo 660 F belonged to a particular generation within the Pleo lineup. Subaru often updates its models with new generations to incorporate design changes, technological advancements, and improvements in performance and safety.

The Pleo 660 F represented a generation that spanned the early 2000s, and it was characterized by its compact size, efficient engine, and suitability for urban driving. While the core design and features remained consistent within this generation, there may have been minor updates and refinements introduced during its production run.

Understanding the trim levels and generation of the Pleo 660 F provides valuable context for potential buyers and enthusiasts. It helps them identify the specific features and improvements associated with this model and make informed decisions based on their preferences and needs.

Fuel Efficiency and Average Consumption

Fuel efficiency and average consumption were standout attributes of the 2000-2001 Subaru Pleo 660 F, solidifying its reputation as an economical choice for urban drivers. The kei car segment, to which the Pleo 660 F belonged, prioritized efficient use of fuel resources, making these metrics of paramount importance.

The Pleo 660 F excelled in terms of fuel efficiency, achieving impressive mileage figures. In the 10/15 mode, a simulation of urban driving conditions, this Subaru model boasted a fuel consumption rating of approximately 50 mpg US (60.1 mpg UK) or 4.7 L/100km. These numbers reflected the vehicle's ability to maximize fuel economy while navigating city streets efficiently.

The exceptional fuel efficiency of the Pleo 660 F was primarily attributed to its compact size, lightweight design, and advanced engineering. Its 658 cm³ engine, with an engine code of EN07, was engineered for both power and efficiency. When combined with the continuously variable transmission (CVT), this powertrain optimized fuel consumption without compromising performance.

The focus on fuel efficiency made the Pleo 660 F an economical choice for daily commuting. Drivers could enjoy extended journeys without frequent refueling stops, reducing overall fuel expenses. Additionally, the vehicle's adherence to G-LEV (Green Low Emission Vehicle) standards showcased its eco-friendly approach to urban mobility.

For urban drivers seeking a cost-effective and environmentally responsible transportation solution, the Pleo 660 F's fuel efficiency and average consumption rates made it a practical and appealing choice. It demonstrated Subaru's commitment to balancing performance and sustainability, aligning perfectly with the needs of city dwellers seeking an efficient and reliable mode of transportation.

Fuel Capacity and Range

Fuel capacity and range are essential considerations when assessing the practicality of any vehicle, and the 2000-2001 Subaru Pleo 660 F was no exception. As a compact kei car designed for urban driving, its fuel capacity and associated range were key aspects of its overall appeal.

The Pleo 660 F came equipped with a fuel tank capable of holding approximately 8.4 US gallons of gasoline (equivalent to about 7 UK gallons or 32 liters). This capacity was carefully chosen to balance the need for fuel efficiency with the desire to minimize the frequency of refueling stops.

With its remarkable fuel efficiency, achieving approximately 50 mpg US (60.1 mpg UK) or 4.7 L/100km in the 10/15 mode, the Pleo 660 F made efficient use of the fuel it carried. This meant that a full tank of gasoline could provide drivers with a substantial driving range before needing to refuel.

The range of the Pleo 660 F, which is the distance it could travel on a full tank of gasoline, depended on driving conditions and individual driving habits. In urban environments where it excelled, the vehicle's range was particularly advantageous. It allowed drivers to cover a significant distance before requiring a refill, reducing the inconvenience of frequent stops at gas stations.

The choice of an 8.4-gallon fuel tank and the vehicle's outstanding fuel efficiency were key factors contributing to the Pleo 660 F's practicality and cost-effectiveness. For city dwellers seeking a vehicle that combined economy, efficiency, and convenience, the Pleo 660 F's fuel capacity and range made it a reliable and appealing choice for daily urban commuting.

Conclusion: Overview of the Subaru Pleo 660 F

In summary, the 2000-2001 Subaru Pleo 660 F offered a compelling package tailored to the needs of urban drivers. This kei car was designed with a focus on compactness, efficiency, and cost-effectiveness, making it an excellent choice for city commuting and daily driving.

Key highlights of the Pleo 660 F included its compact exterior dimensions, lightweight construction, and a fuel-efficient 658 cm³ engine. The vehicle's fuel tank capacity of approximately 8.4 US gallons, combined with its remarkable fuel efficiency, provided an extended driving range, reducing the frequency of refueling stops for urban drivers.

Inside the cabin, the Pleo 660 F offered practical space for up to four passengers across two rows of seats. Its compact size and nimble handling made it ideal for navigating tight city streets, while its fuel efficiency and adherence to G-LEV emissions standards demonstrated a commitment to environmental responsibility.

The Pleo 660 F's wheel specifications, including its choice of tires and aluminum disks, contributed to its stability and maneuverability in urban environments. Its balance of ride comfort and handling ensured a pleasant driving experience for city dwellers.

Furthermore, the vehicle's safety features, including standard driver's airbags, side impact bars, and safety belts, added to its appeal as a practical and secure transportation solution.

Overall, the 2000-2001 Subaru Pleo 660 F stood out as an economical, eco-friendly, and reliable choice for urban drivers. Its combination of compact dimensions, fuel efficiency, and thoughtful engineering made it a practical and cost-effective option for navigating the challenges of city living.

Frequently Asked Questions (FAQ) about the 2000-2001 Subaru Pleo 660 F