1998 Subaru Pleo 660 LM Specs

OVERVIEW

With a fuel consumption of 44.3 mpg US - 53.2 mpg UK - 5.3 L/100km, a weight of 1918 lbs (870 kg), the Subaru Pleo 660 LM has a 4 cylinder SOHC engine, a Regular gasoline engine EN07. This engine EN07 produces a maximum power of 45.6 PS (45 bhp - 33.5 kW) at 6400 rpm and a maximum torque of 55.8 Nm (41.2 lb.ft - 5.7 kg.m) at 4000 rpm. The engine power is transmitted to the road by the four wheel drive (4WD) with a 5MT gearbox. For stopping power, the Subaru Pleo 660 LM braking system includes Leading trailing drum brake at the rear and Ventilated disk at the front. Stock tire sizes are 145/70 on 12 inch rims at the rear and 145/70 on 12 inch rims at the front. Chassis details - Subaru Pleo 660 LM has dual link strut rear suspension and L type lower arm strut front suspension for road holding and ride confort.

Add to compare list

- Present
- Option
- Not Present (or Dealer Option)

• Search Car Specs
• Other Pleo Specs Database

By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on April 20, 2024

Introduction to the 1998-1999 Subaru Pleo 660 LM

The 1998-1999 Subaru Pleo 660 LM marks a notable entry in the Pleo lineup during that era. This compact minivan, produced from October 1998 to May 1999, was designed with practicality and versatility in mind.

With its 4WD traction system, the Pleo 660 LM offered enhanced stability and control, making it suitable for various road conditions. Its body type, a two-row seat minivan, emphasized interior space utilization and comfort, catering to the needs of both drivers and passengers.

Under the hood, the Pleo 660 LM was powered by a 658 cm3 engine, delivering a respectable balance of performance and efficiency. The 5-speed manual transmission provided drivers with precise control over gear shifts, enhancing the overall driving experience.

In terms of dimensions, this model measured approximately 339.5 cm in length, 147.5 cm in width, and 162.5 cm in height. These compact exterior dimensions made it well-suited for urban driving and parking in tight spaces. Inside, passengers could enjoy an interior length of around 168.5 cm, accommodating both comfort and practicality.

The Pleo 660 LM boasted a wheelbase of 231 cm, contributing to its stable handling characteristics. With a minimum turning circle of 4.6 meters, maneuvering through city streets and parking lots was a breeze.

The vehicle's weight stood at 870 kg, striking a balance between agility and stability on the road. Seating capacity for four and five doors provided convenient access for passengers, and the inclusion of a rear gear ratio of 3.666 further enhanced its drivability.

When it came to fuel efficiency, the Pleo 660 LM exhibited impressive performance. It could carry up to 8.4 US gallons of fuel, translating into extended journeys with fewer fuel stops. The engine's efficiency, with a fuel consumption rate of 44.3 mpg in the 10/15 mode, contributed to its cost-effective operation.

In summary, the 1998-1999 Subaru Pleo 660 LM embodied a blend of practicality, efficiency, and compact design. Its 4WD capability, spacious interior, and fuel-efficient engine made it a compelling choice for drivers seeking versatility in a compact minivan.

Overview of Pleo 660 LM Specifications

The 1998-1999 Subaru Pleo 660 LM presents a compelling set of specifications that cater to the needs of drivers seeking a compact and versatile vehicle.

Drive Wheels and Traction:
The Pleo 660 LM featured a 4WD (Four-Wheel Drive) system, enhancing its traction and stability on various road surfaces. This drivetrain configuration ensured that the vehicle could handle different driving conditions with confidence.

Body Type:
As a minivan with two rows of seats, the Pleo 660 LM prioritized interior space and passenger comfort. This body style offered practicality for families and those needing extra cargo capacity.

Transmission Gearbox:
Equipped with a 5-speed manual transmission, this model provided drivers with control over gear shifts, allowing for a more engaging driving experience. The manual gearbox allowed for precise control over power delivery.

Engine Size:
The Pleo 660 LM was powered by a 658 cm3 engine, offering a balance of performance and efficiency suitable for its size and intended use.

Frame Name:
The vehicle's frame was identified as GF-RA2, reflecting its structural design and characteristics.

Fuel Tank Capacity:
With an 8.4 US gallon (7 UK gallon or 32 L) fuel tank capacity, the Pleo 660 LM could cover significant distances between refueling stops, contributing to its practicality for daily commuting and longer trips.

Number of Seats:
This model provided seating for up to four passengers, offering a comfortable interior for its size.

Number of Doors:
With five doors, including both front and rear passenger access, the Pleo 660 LM prioritized convenience and ease of entry and exit.

Minimum Turning Circle:
The vehicle boasted a minimum turning circle of 4.6 meters, making it agile and maneuverable in urban environments.

Engine Code:
The Pleo 660 LM featured the EN07 engine code, which signifies its specific powerplant.

Maximum Power and Torque:
The engine delivered a maximum power output of 45.6 PS (45 bhp or 33.5 kW) and a torque of 55.8 Nm (41.2 lb.ft or 5.7 kg.m) at specific RPMs, ensuring adequate performance for its intended use.

Engine Type:
With a 4-cylinder SOHC engine configuration, the Pleo 660 LM offered a good balance of power and efficiency.

Fuel Type and Consumption:
Running on regular gasoline, the vehicle exhibited a fuel consumption rate of 44.3 mpg in the 10/15 mode, emphasizing its economical operation.

These specifications collectively characterized the 1998-1999 Subaru Pleo 660 LM as a practical, efficient, and versatile compact minivan, appealing to a range of drivers and lifestyles.

Engine Options in the 1998-1999 Models

In the years 1998 and 1999, the Subaru Pleo 660 LM was offered with a specific engine option that powered this compact minivan.

Engine Size and Capacity:
The engine that propelled the 1998-1999 Pleo 660 LM had a displacement of 658 cm3, making it suitable for the kei car category in Japan. This engine's compact size allowed for efficient use of space and fuel economy.

Engine Code:
The engine used in these models carried the EN07 engine code, which identified its specific design and characteristics.

Performance Specifications:
This engine produced a maximum power output of 45.6 PS (45 bhp or 33.5 kW) at 6400 rpm, providing adequate performance for its intended use. Additionally, it generated a maximum torque of 55.8 Nm (41.2 lb.ft or 5.7 kg.m) at 4000 rpm, contributing to the vehicle's overall drivability.

Fuel Type and Efficiency:
Running on regular gasoline, this engine exhibited a fuel consumption rate of 44.3 mpg in the 10/15 mode, emphasizing its efficiency and economical operation.

Cylinder Configuration:
The Pleo 660 LM's engine featured a 4-cylinder single overhead cam (SOHC) configuration. This setup is known for its simplicity and reliability.

Transmission:
Power from this engine was transmitted to the wheels through a 5-speed manual transmission. This manual gearbox provided drivers with control over gear selection, contributing to an engaging driving experience.

Overall, the 1998-1999 Subaru Pleo 660 LM featured a specific engine option that offered a balance of performance and efficiency. Its compact size, combined with the 4-cylinder SOHC configuration, made it suitable for the kei car category and urban driving. The manual transmission allowed for precise control, enhancing the driving experience for those who opted for this model.

Fuel Tank Capacity: How Much Can It Hold?

The fuel tank capacity of the 1998-1999 Subaru Pleo 660 LM was a notable feature, offering drivers ample range between refueling stops.

Fuel Tank Capacity:
This compact minivan came equipped with a fuel tank capable of holding 8.4 US gallons (7 UK gallons or 32 liters) of fuel. This generous capacity allowed the Pleo 660 LM to cover substantial distances without the need for frequent visits to the gas station.

Practicality and Convenience:
The capacity of 8.4 US gallons (7 UK gallons or 32 liters) was well-suited for a vehicle of this size and intended use. It struck a balance between providing a sufficient driving range for daily commuting and longer trips while keeping the vehicle's overall weight manageable.

Fuel Efficiency:
Combined with the Pleo 660 LM's efficient engine, which achieved a fuel consumption rate of 44.3 mpg in the 10/15 mode, the fuel tank capacity contributed to cost-effective and economical driving.

Versatility in Driving Conditions:
The ample fuel tank capacity also made the Pleo 660 LM versatile in various driving conditions, including urban commuting and highway travel. Drivers could enjoy longer journeys with fewer interruptions for refueling, adding to the overall convenience of the vehicle.

In summary, the 1998-1999 Subaru Pleo 660 LM's fuel tank capacity of 8.4 US gallons (7 UK gallons or 32 liters) emphasized its practicality, range, and efficiency. This feature contributed to the vehicle's appeal as a compact and cost-effective transportation option for drivers in diverse settings.

Fuel Consumption: Understanding the Efficiency

Understanding the fuel consumption of the 1998-1999 Subaru Pleo 660 LM is crucial for assessing its efficiency and cost-effectiveness as a compact minivan.

Fuel Efficiency in City and Highway Driving:
The Pleo 660 LM exhibited commendable fuel efficiency, with a reported fuel consumption rate of 44.3 mpg in the 10/15 mode. This figure was indicative of the vehicle's ability to cover a significant distance on a relatively small amount of fuel. Such efficiency was especially valuable for drivers navigating both city streets and highways.

Economical Operation:
The fuel economy of the Pleo 660 LM contributed to its economical operation, making it an attractive choice for daily commuting and long-distance travel alike. With rising fuel prices, a vehicle that could deliver more miles per gallon (MPG) provided savings at the pump.

Practicality for Kei Car Category:
This level of fuel efficiency aligned with the expectations of the kei car category in Japan, where compact cars like the Pleo 660 LM were designed to be fuel-efficient and environmentally friendly.

Cost Savings:
Drivers of the Pleo 660 LM could enjoy cost savings over time due to its efficient fuel consumption. Whether used for short city commutes or extended road trips, the vehicle's ability to make the most out of each gallon of fuel contributed to reduced fuel expenses.

Environmentally Conscious Driving:
In addition to the economic benefits, the fuel-efficient operation of the Pleo 660 LM also meant lower carbon emissions, aligning with environmental concerns and regulations.

Engine and Transmission Synergy:
The combination of the compact 658 cm3 engine and the 5-speed manual transmission played a crucial role in achieving this level of fuel efficiency. The manual transmission allowed for precise control over gear shifts, optimizing power delivery.

In summary, the 1998-1999 Subaru Pleo 660 LM showcased impressive fuel efficiency, making it a practical and economical choice for a wide range of driving scenarios. Its ability to balance performance with efficiency underscored its suitability for urban and highway use, ultimately delivering savings for drivers and reduced environmental impact.

Fuel Capacity: More on the Fuel System

Examining the fuel capacity of the 1998-1999 Subaru Pleo 660 LM provides insights into its fuel system, highlighting its practicality and convenience for drivers.

Fuel Tank Capacity:
The Pleo 660 LM was equipped with a fuel tank capable of holding 8.4 US gallons (7 UK gallons or 32 liters) of fuel. This ample capacity allowed the vehicle to cover substantial distances between refueling stops, reducing the inconvenience of frequent trips to the gas station.

Fuel Filler Location:
The location of the fuel filler was designed for accessibility and ease of use, making it convenient for drivers to refill the tank when needed.

Cost-Effective Driving:
The combination of the spacious fuel tank and the vehicle's efficient engine translated into cost-effective driving. Drivers could enjoy longer journeys with fewer fuel expenses, enhancing the overall ownership experience.

Extended Range:
The generous fuel capacity extended the vehicle's range, making it suitable for both daily commuting and longer road trips. Whether navigating city streets or cruising on highways, the Pleo 660 LM offered versatility in driving scenarios.

Refueling Frequency:
Drivers of the Pleo 660 LM could benefit from the reduced frequency of refueling. This convenience was particularly valuable for those with busy schedules or those covering long distances regularly.

Fuel Tank Material and Durability:
The durability and material quality of the fuel tank were designed to meet safety and performance standards. This ensured the integrity of the fuel system, contributing to the overall reliability of the vehicle.

In summary, the 1998-1999 Subaru Pleo 660 LM's fuel capacity of 8.4 US gallons (7 UK gallons or 32 liters) reflected a well-designed fuel system that prioritized convenience and practicality. This feature allowed for extended driving ranges, reduced refueling stops, and cost-effective operation, enhancing the overall ownership experience for drivers.

Fuel Average: Calculating Miles Per Gallon (MPG)

Calculating miles per gallon (MPG) for the 1998-1999 Subaru Pleo 660 LM provides valuable insights into its fuel efficiency and how far it can travel on a single gallon of fuel.

Fuel Efficiency Metrics:
The Pleo 660 LM showcased impressive fuel efficiency, with a reported fuel consumption rate of 44.3 mpg in the 10/15 mode. This metric, commonly used to measure a vehicle's efficiency, indicated that the Pleo 660 LM could cover a significant distance on a relatively small amount of fuel.

Economic Benefits:
High MPG figures translated into economic advantages for drivers. With rising fuel costs, a vehicle that could deliver more miles per gallon offered savings at the pump, contributing to reduced overall operating expenses.

Range and Versatility:
The vehicle's fuel efficiency made it versatile for various driving scenarios. Whether used for city commuting or highway travel, the Pleo 660 LM allowed drivers to enjoy extended driving ranges without frequent refueling stops.

Environmental Considerations:
Efficient fuel consumption also aligned with environmental concerns, as it resulted in reduced carbon emissions. This was in line with eco-friendly driving practices and regulations aimed at minimizing the environmental impact of vehicles.

Engine and Transmission Synergy:
The synergy between the compact 658 cm3 engine and the 5-speed manual transmission played a significant role in achieving the impressive MPG figures. The manual transmission allowed for precise control over gear shifts, optimizing power delivery for efficiency.

Cost Savings and Ownership Experience:
The combination of high MPG and a spacious fuel tank provided a cost-effective ownership experience. Drivers could benefit from fewer trips to the gas station and more value for their fuel expenses.

In summary, the 1998-1999 Subaru Pleo 660 LM's calculation of miles per gallon (MPG) underscored its exceptional fuel efficiency. This efficiency translated into economic benefits, extended driving ranges, and reduced environmental impact, making it an attractive choice for drivers seeking practical and economical transportation.

Exploring the Dimensions of the Pleo 660 LM

Exploring the dimensions of the 1998-1999 Subaru Pleo 660 LM provides insights into the vehicle's compact yet practical design, catering to various driving needs and urban environments.

Exterior Dimensions:
The Pleo 660 LM featured a compact exterior, measuring approximately 339.5 cm in length, 147.5 cm in width, and 162.5 cm in height. These dimensions made it well-suited for navigating city streets and parking in tight spaces, offering maneuverability and ease of use.

Interior Dimensions:
Inside the vehicle, passengers could enjoy an interior length of around 168.5 cm, providing ample legroom for both the driver and passengers. The interior width measured approximately 122 cm, ensuring comfortable seating arrangements, while the interior height stood at 127 cm, offering sufficient headroom.

Wheelbase:
The Pleo 660 LM boasted a wheelbase of 231 cm, contributing to its stability on the road. A longer wheelbase often results in improved handling and a smoother ride, enhancing the overall driving experience.

Axle Lengths:
The front axle had a length of about 128.5 cm, while the rear axle measured around 126 cm. These dimensions played a role in the vehicle's balance and handling characteristics.

Ride Height - Ground Clearance:
With a ground clearance of 15 cm, the Pleo 660 LM struck a balance between accessibility and protection. This height allowed it to navigate various road conditions while keeping the undercarriage safe from obstacles.

Weight and Seating Capacity:
Weighing in at 870 kg, the vehicle offered a practical balance between agility and stability. It provided seating for four passengers, making it suitable for small families or groups.

Doors and Turning Circle:
With five doors, including both front and rear access, the Pleo 660 LM prioritized convenience for passengers. Its minimum turning circle of 4.6 meters made it agile and maneuverable, particularly in urban settings.

In summary, the dimensions of the 1998-1999 Subaru Pleo 660 LM reflected its compact yet practical design. Its exterior dimensions made it well-suited for urban driving, while the interior dimensions ensured passenger comfort. The vehicle's wheelbase, axle lengths, and ground clearance contributed to its stability and versatility, making it a versatile choice for a range of driving scenarios.

Sizes and Proportions of the Vehicle

Understanding the sizes and proportions of the 1998-1999 Subaru Pleo 660 LM sheds light on its compact design and how it maximizes interior space while maintaining maneuverability.

Compact Exterior:
Measuring approximately 339.5 cm in length, 147.5 cm in width, and 162.5 cm in height, the Pleo 660 LM boasted a compact exterior. These dimensions allowed it to effortlessly navigate crowded city streets and fit into tight parking spaces.

Interior Comfort:
Despite its compact exterior, the vehicle prioritized interior comfort. With an interior length of around 168.5 cm, passengers had sufficient legroom. The interior width of approximately 122 cm provided comfortable seating arrangements, and the interior height of 127 cm ensured ample headroom.

Wheelbase:
The Pleo 660 LM featured a wheelbase of 231 cm. A longer wheelbase enhances stability, contributing to a smoother ride and improved handling.

Axle Lengths:
The front axle measured about 128.5 cm in length, while the rear axle was approximately 126 cm long. These measurements influenced the vehicle's balance and handling characteristics.

Ground Clearance:
With a ground clearance of 15 cm, the Pleo 660 LM found a suitable balance between accessibility and undercarriage protection. This height allowed it to tackle various road conditions without compromising safety.

Weight and Seating Capacity:
Weighing 870 kg, the vehicle maintained a balance between agility and stability. Its seating capacity for four passengers made it an ideal choice for small families or groups.

Doors and Turning Circle:
Featuring five doors, including both front and rear access points, the Pleo 660 LM prioritized convenience for passengers. Its minimum turning circle of 4.6 meters contributed to its agility and maneuverability, especially in urban environments.

In summary, the 1998-1999 Subaru Pleo 660 LM's sizes and proportions highlighted its compact yet comfortable design. The exterior dimensions allowed for easy city navigation and parking, while the interior dimensions ensured passenger comfort. The wheelbase, axle lengths, and ground clearance contributed to stability and versatility, making it a practical choice for various driving scenarios.

Wheel Choices: Tires and Rims

The wheel choices, including tires and rims, for the 1998-1999 Subaru Pleo 660 LM played a crucial role in its overall performance, handling, and aesthetic appeal.

Tire Selection:
The Pleo 660 LM typically came equipped with tires sized at 145/70 R12 for both the front and rear wheels. These tires strike a balance between grip, stability, and fuel efficiency, making them suitable for the vehicle's compact design and intended use.

Rim Dimensions:
The rim dimensions for the Pleo 660 LM matched the tire size, featuring 12-inch rims. This sizing was in harmony with the tires and contributed to the overall handling characteristics of the vehicle.

Tire Type:
The selection of tires for this model typically focused on all-season or standard road tires. These tires offered versatility and performance in various weather conditions and road surfaces, emphasizing the practicality of the Pleo 660 LM.

Aluminium Disk (Standard):
The inclusion of standard aluminum disks added a touch of style and modernity to the vehicle's appearance. These aluminum disks were a standard feature, enhancing the overall aesthetic appeal.

Tire Maintenance and Replacement:
Owners of the Pleo 660 LM could benefit from the relatively common tire size, which facilitated tire maintenance and replacement. The availability of tires in this size made it convenient for owners to find suitable replacements when needed.

In summary, the wheel choices, including tire size, rim dimensions, and the presence of standard aluminum disks, were carefully selected to align with the Pleo 660 LM's compact design and intended use. These choices contributed to the vehicle's performance, handling, and visual appeal, enhancing the overall ownership experience for drivers.

Generation and Trim Levels of the Pleo 660 LM

The 1998-1999 Subaru Pleo 660 LM belongs to a specific generation within the Pleo lineup, and it offers various trim levels to cater to different preferences and needs.

Generation:
The Pleo 660 LM was part of the second-generation Pleo, which was introduced in 1998. This generation brought several improvements and updates over its predecessor, enhancing the overall driving experience and design.

Trim Levels:
Within the Pleo 660 LM lineup, there were several trim levels available, each offering a unique set of features and options to meet the demands of different customers. While specific trim levels may vary depending on the market and region, they typically included variations in interior amenities, exterior styling, and additional equipment.

Customization Options:
The availability of multiple trim levels allowed customers to choose the one that best suited their preferences and requirements. Some trim levels may have focused on providing enhanced comfort and convenience features, while others may have prioritized performance or affordability.

Pleo 660 LM's Versatility:
The inclusion of various trim levels showcased the versatility of the Pleo 660 LM, making it adaptable for a wide range of drivers and lifestyles. Whether a driver sought a more basic and cost-effective option or desired a model with advanced features, the Pleo 660 LM lineup offered choices to accommodate those needs.

Enhancements Over Time:
The introduction of different trim levels within the Pleo 660 LM lineup also allowed for continuous improvements and enhancements over time, reflecting Subaru's commitment to meeting customer expectations and evolving automotive trends.

In summary, the 1998-1999 Subaru Pleo 660 LM belonged to the second generation of the Pleo series and offered multiple trim levels to cater to diverse customer preferences. This approach allowed drivers to choose a Pleo 660 LM that best aligned with their specific requirements, emphasizing the model's adaptability and commitment to meeting customer needs.

Comparing the MPG Across Different Trims

When comparing the MPG (miles per gallon) across different trims of the 1998-1999 Subaru Pleo 660 LM, it's important to note that fuel efficiency can vary based on various factors, including engine specifications and additional features specific to each trim level.

Trim-Dependent MPG:
While the base MPG figures for the Pleo 660 LM were generally consistent across different trims, variations could occur due to differences in weight, equipment, and configurations. It's common for trims with additional features or options to have slightly lower MPG figures compared to more basic trims.

Performance vs. Efficiency:
Some trims might prioritize performance over fuel efficiency, potentially offering more powerful engines or sportier features. In such cases, the MPG may be slightly lower compared to trims that prioritize efficiency.

Additional Features and Weight:
Trims with added features, such as larger infotainment systems, advanced safety technologies, or luxury amenities, could carry additional weight. This extra weight might impact MPG, although modern engineering aims to mitigate this effect.

Transmission Options:
The availability of different transmission options within the trims can also influence fuel efficiency. Automatic transmissions may have different MPG ratings compared to manual transmissions.

Tire and Wheel Choices:
Trims might offer variations in tire and wheel choices, which can affect MPG. For instance, larger or sportier wheels might have a marginal impact on fuel economy.

Aerodynamic Enhancements:
Some trims might feature aerodynamic enhancements, such as spoilers or body kits, which can influence the vehicle's drag coefficient and, subsequently, MPG.

Driving Style and Conditions:
It's important to remember that real-world MPG can vary widely based on driving style, traffic conditions, and maintenance. Achieving optimal fuel efficiency often depends on factors beyond the vehicle's trim level.

In summary, while the base MPG figures for the 1998-1999 Subaru Pleo 660 LM were generally consistent across different trims, variations could occur due to factors such as added features, weight differences, transmission options, tire choices, and aerodynamic enhancements. When comparing MPG across trims, it's essential to consider these factors and their potential impact on fuel efficiency.

Notable Features and Options

The 1998-1999 Subaru Pleo 660 LM offered a range of notable features and options that enhanced the driving experience, safety, and convenience for its owners. These features varied across different trims and models but included several key elements:

1. Four-Wheel Drive (4WD): The Pleo 660 LM was equipped with a 4WD system, providing enhanced traction and stability, particularly in adverse weather conditions or on challenging road surfaces. This feature contributed to improved handling and safety.

2. Spacious Interior: Despite its compact exterior, the Pleo 660 LM featured an interior with ample legroom and headroom for both the driver and passengers. This ensured a comfortable and pleasant ride.

3. Fuel Efficiency: The vehicle boasted impressive fuel efficiency, achieving a fuel consumption rate of 44.3 mpg in the 10/15 mode. This level of efficiency translated into cost savings and reduced environmental impact.

4. Manual Transmission: The 5-speed manual transmission allowed for precise control over gear shifts, optimizing power delivery and contributing to the vehicle's overall efficiency.

5. Safety Features: The Pleo 660 LM was equipped with safety features such as driver's airbags, side impact bars, and three-point safety belts, enhancing occupant protection in the event of an accident.

6. Power Windows and Steering: Standard power windows and power steering added convenience to the driving experience, making it easier to operate the vehicle and adjust windows as needed.

7. Turning Seats: Some trims of the Pleo 660 LM featured turning seats, which improved accessibility for passengers, especially when entering or exiting the vehicle.

8. UV Glass Protection: Ultraviolet (UV) glass protection helped shield occupants from harmful UV rays, contributing to a more comfortable and sun-safe interior environment.

9. Roof Rails: Roof rails provided additional utility, allowing for the attachment of roof racks or carriers, enhancing the vehicle's versatility for transporting cargo or equipment.

10. Remote Keyless Entry: Certain trims offered the convenience of remote keyless entry, simplifying the process of locking and unlocking the vehicle.

11. Back Wiper: The inclusion of a rear wiper improved visibility in wet or rainy conditions, contributing to safer driving.

It's important to note that the availability of these features and options could vary depending on the specific trim level and market. These notable features and options collectively made the 1998-1999 Subaru Pleo 660 LM a practical, efficient, and comfortable choice for a range of driving needs.

Maintenance Tips for Optimal Fuel Efficiency

Maintaining optimal fuel efficiency in the 1998-1999 Subaru Pleo 660 LM is essential for cost savings and eco-friendly driving. Here are some maintenance tips to help achieve and sustain efficient fuel consumption:

1. Regular Engine Tune-Ups: Schedule regular engine tune-ups to ensure that the engine is running efficiently. A well-maintained engine performs optimally and consumes fuel more efficiently.

2. Proper Tire Inflation: Keep the tires properly inflated to the recommended levels. Underinflated tires increase rolling resistance and reduce fuel efficiency. Regularly check tire pressure and adjust it as needed.

3. Wheel Alignment: Ensure that the wheels are properly aligned. Misaligned wheels can cause uneven tire wear and reduce fuel efficiency. Correct alignment helps the tires roll smoothly.

4. Air Filter Replacement: Replace the air filter as recommended by the manufacturer. A clean air filter allows for better airflow into the engine, improving combustion efficiency.

5. Fuel System Maintenance: Regularly clean the fuel injectors and fuel lines to prevent clogs and maintain proper fuel delivery. Clean fuel injectors ensure efficient combustion.

6. Use the Right Engine Oil: Use the recommended engine oil for the Pleo 660 LM. The right oil helps reduce friction and allows the engine to operate more efficiently.

7. Properly Maintained Transmission: Ensure that the transmission is in good condition. A well-maintained transmission shifts gears smoothly, preventing unnecessary fuel consumption.

8. Lighten the Load: Avoid carrying unnecessary weight in the vehicle. Extra weight places additional stress on the engine and reduces fuel efficiency. Remove items from the trunk that are not needed for your journey.

9. Smooth Driving Habits: Practice smooth driving habits, including gradual acceleration and deceleration. Aggressive driving, such as rapid acceleration and hard braking, can significantly reduce fuel efficiency.

10. Limit Idling: Avoid prolonged idling, as idling consumes fuel without moving the vehicle. If you anticipate waiting for an extended period, it's more fuel-efficient to turn off the engine and restart it when needed.

11. Plan Routes Efficiently: Plan your routes to minimize unnecessary stops and detours. Efficient route planning can reduce the distance you need to drive and save fuel.

12. Use the Right Fuel: Use the recommended fuel grade for the Pleo 660 LM. Using higher-octane fuel than necessary does not typically improve fuel efficiency and can be more expensive.

13. Regular Maintenance Checks: Stick to a regular maintenance schedule and address any issues promptly. Fixing problems early can prevent them from worsening and negatively affecting fuel efficiency.

By following these maintenance tips, Pleo 660 LM owners can optimize fuel efficiency, reduce fuel expenses, and minimize their environmental footprint, all while enjoying a smoother and more economical driving experience.

Conclusion: A Closer Look at the Pleo 660 LM's Specs

The 1998-1999 Subaru Pleo 660 LM is a notable vehicle that offers a combination of practicality, efficiency, and versatility. This closer look at its specifications reveals key aspects that made it a compelling choice for drivers during its production period:

Compact Design: The Pleo 660 LM's compact exterior dimensions, measuring approximately 339.5 cm in length, 147.5 cm in width, and 162.5 cm in height, made it well-suited for urban driving, parking in tight spaces, and navigating crowded streets.

Interior Comfort: Despite its compact size, the vehicle provided a spacious interior with ample legroom, headroom, and seating for four passengers. This focus on interior comfort ensured a pleasant ride for both driver and passengers.

Efficient Powertrain: Equipped with a 658 cm3 engine and a 5-speed manual transmission, the Pleo 660 LM delivered impressive fuel efficiency, achieving a fuel consumption rate of 44.3 mpg in the 10/15 mode. This efficiency translated into cost savings and reduced environmental impact.

Safety Features: The inclusion of safety features such as driver's airbags, side impact bars, and three-point safety belts prioritized occupant protection, enhancing overall safety.

Versatility: With various trim levels and options available, the Pleo 660 LM catered to a diverse range of customer preferences and needs. The availability of different trims allowed customers to choose the features and performance characteristics that best suited their lifestyles.

4WD Capability: The 4WD system provided enhanced traction and stability, ensuring confident handling in various driving conditions, including inclement weather and challenging road surfaces.

Convenience Features: Amenities like power windows, power steering, remote keyless entry, and turning seats added convenience and ease of use to the driving experience.

Maintenance Considerations: To maintain optimal fuel efficiency, regular maintenance, including engine tune-ups, tire maintenance, and proper fuel system care, was essential. These practices helped ensure the vehicle's longevity and efficiency.

In conclusion, the 1998-1999 Subaru Pleo 660 LM combined a compact design, efficient powertrain, safety features, and versatility to create a well-rounded and practical vehicle. Its focus on fuel efficiency and comfortable interiors made it an attractive choice for a wide range of drivers, especially those navigating urban environments.

FAQ: Your Comprehensive Guide to the 1998-1999 Subaru Pleo 660 LM