2000 Subaru Pleo 660 L Specs


OVERVIEW

With a fuel consumption of 42 mpg US - 50.4 mpg UK - 5.6 L/100km, a weight of 1829 lbs (830 kg), the Subaru Pleo 660 L has a water cooling 4 cycle 4 cylinder SOHC intercooler attaching mild charge engine, a Regular gasoline engine EN07. This engine EN07 produces a maximum power of 60.8 PS (60 bhp - 44.7 kW) at 6400 rpm and a maximum torque of 74.5 Nm (54.9 lb.ft - 7.6 kg.m) at 4000 rpm. The engine power is transmitted to the road by the front wheel drive (FF) with a i-CVT gearbox. For stopping power, the Subaru Pleo 660 L braking system includes Leading trailing drum brake at the rear and Ventilated disk at the front. Stock tire sizes are 155/65 on 13 inch rims at the rear and 155/65 on 13 inch rims at the front. Chassis details - Subaru Pleo 660 L has dual link strut independent suspension rear suspension and L type lower arm strut independent front suspension for road holding and ride confort.

Add to compare list

GENERAL INFORMATION
Complectation Name660 L
Period of ProductionOct 2000 - Sep 2001
Drive Wheels - Traction - DrivetrainFF
Body TypeMinivan (2 row seats)
Transmission Gearbox - Number of Speedsi-CVT
Engine Size - Displacement - Engine Capacity658 cm3 or 40.1 cu-in
Frame NameTA-RA1

SUBARU PLEO 660 L SIZE, DIMENSIONS AND WEIGHT
Exterior Length339.5 cm or 133.66 inches
Exterior Width147.5 cm or 58.07 inches
Exterior Height157.5 cm or 62 inches
Interior Length168.5 cm or 66.33 inches
Interior Width122 cm or 48.03 inches
Interior Height127 cm or 50 inches
Wheelbase231 cm or 90.94 inches
Front Axle Length128.5 cm or 50.59 inches
Rear Axle Length126 cm or 49.6 inches
Ride Height - Ground Clearance15 cm or 5.9 inches
Weight830 kg or 1829 lbs
Num. of Seats4
Num. of Doors5
Minimum Turning Circle - Turning Diameter, m4.6
Fuel Tank Capacity8.4 US gallons
7 UK gallons
32 L

SUBARU PLEO 660 L ENGINE TECHNICAL DATA
Engine CodeEN07
Maximum Power - Output - Horsepower60.8 PS or 60 bhp or 44.7 kW
Maximum Power RPM6400 rpm
Maximum Torque74.5 Nm or 54.9 lb.ft or 7.6 kg.m
Maximum Torque RPM4000 rpm
Engine Type - Number of Cylinderswater cooling 4 cycle 4 cylinder SOHC intercooler attaching mild charge
Engine Additional InfoCharger
Fuel TypeRegular gasoline
LEVG-LEV
Fuel Consumption (10/15 mode)42 mpg US
50.4 mpg UK
5.6 L/100km
CVT Ger Ratio2.432
Rear Gear Ratio1.931
Compression Ratio9
Bore5.6 cm or 2.2 inches
Stroke6.7 cm or 2.63 inches

SUBARU PLEO 660 L SUSPENSION
Front Brakes - Disc DimensionsVentilated disk
Rear Brakes - Disс DimensionsLeading trailing drum brake
Front SuspensionL type lower arm strut independent
Rear Suspensiondual link strut independent suspension
Front Tyres - Rims Dimensions155/65 R13
Rear Tyres - Rims Dimensions155/65 R13
Tyres - Rims Dimensions155 / 65 R13
Aluminium DiskStandart

SUBARU PLEO 660 L EXTERIOR
SunroofNo
Tilt SunroofNo
Twin SunroofNo
Front SpoilerNo
Rear SpoilerNo
Power Adjustable Door MirrorsStandart
Xenon LampsNo
Front Fog LampsNo
Rear Fog LampsNo
Cornering LampsNo
Ultraviolet Glass ProtectionNo
Roof RailNo
Back WiperStandart

SUBARU PLEO 660 L INTERIOR
Power WindowStandart
Power SteeringStandart
TachometerNo
Centralized Door LockStandart
Keyless EnterStandart
Right Hand DriveStandart
Left Hand DriveNo
Leather WindingNo
Adjustable SteeringNo
Telescopic SteeringNo
Tilt SteeringNo
Wood PanelNo
Cruise ControlNo
Leather SeatNo
Power Adjustable SeatsNo
Power Ajustable Front SeatNo
Power Ajustable Back SeatNo
Reclining SeatsNo
Removable SeatsStandart
Turning SeatsNo

SUBARU PLEO 660 L SAFETY
Drivers AirbagStandart
Passengers AirbagNo
Side AirbagNo
Side Impact BarStandart
TCSNo
Break AssistNo
Parking RadarNo
Central Power Window ControlNo
Additional Stop LightNo
Safety Belt PretensionerNo
Safety Belt LimiterStandart
3 Point Safety BeltStandart
Child Car RestraintsStandart
Durable FrameStandart

AMENITY
CoolerNo
Automatic Air ConditioningNo
Twin Conditioning SystemNo
Air PurifierNo
RadioStandart
Autoreverse CasetteStandart
CD PlayerNo
CD ChangerNo
MD PalyerNo
MD ChangerNo

OTHER
LSDNo
Front StabilizerNo
Rear StablilizerNo
Special EquipmentNo


- Present
- Option
- Not Present (or Dealer Option)



More photos Subaru Pleo


By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on March 29, 2024
πŸ“Œ Introduction to the 2000-2001 Subaru Pleo 660 L
πŸ“Œ Engine Specifications of the Subaru Pleo 660 L
πŸ“Œ Fuel Efficiency and MPG of the Pleo 660 L
πŸ“Œ Fuel Tank Capacity in the Pleo 660 L
πŸ“Œ Dimensions and Sizes of the Pleo 660 L
πŸ“Œ Wheel Options for the Pleo 660 L
πŸ“Œ Trim Levels and Features
πŸ“Œ Generational Changes and Updates
πŸ“Œ Fuel Consumption Rates in Real-world Conditions
πŸ“Œ Fuel Capacity for Long Journeys
πŸ“Œ Average Fuel Economy (MPG) for City and Highway Driving
πŸ“Œ Notable Advantages of the Pleo 660 L
πŸ“Œ Common Maintenance and Repair Considerations
πŸ“Œ Ownership Experiences and Reviews
πŸ“Œ Conclusion: A Look Back at the Subaru Pleo 660 L (2000-2001)
πŸ“Œ FAQ: Your Top Questions About the 2000-Subaru Pleo 660 L Answered

Introduction to the 2000-2001 Subaru Pleo 660 L

The 2000-2001 Subaru Pleo 660 L represents a compact and efficient option in the world of kei cars. With its production spanning from October 2000 to September 2001, this vehicle made its mark as a practical choice for urban driving.

Drivetrain and Body Type:
The Pleo 660 L featured a front-wheel-drive (FF) configuration, making it well-suited for city commuting. Its body type, categorized as a minivan with two rows of seats, provided ample space for passengers and cargo within its compact dimensions.

Transmission and Engine:
Equipped with an i-CVT (Intelligent Continuously Variable Transmission), this Pleo variant offered a smooth and efficient driving experience. Powering the vehicle was a 658cc engine, identified as the EN07. This engine, a water-cooled, four-cylinder, SOHC, and intercooler-equipped powerplant, delivered a respectable balance of performance and fuel efficiency.

Dimensions and Weight:
Measuring at approximately 133.66 inches in length, 58.07 inches in width, and 62 inches in height, the Pleo 660 L maintained a compact exterior profile. Its interior dimensions allowed for comfortable seating and practical use of space. With a weight of 830 kg (1829 lbs), the Pleo was a lightweight vehicle.

Seating and Doors:
Inside, the Pleo 660 L accommodated up to four passengers, with easy access through its five doors. The car's compact design made it maneuverable and ideal for navigating tight city streets.

Fuel Efficiency and Capacity:
As a kei car, the Pleo was known for its impressive fuel efficiency. It featured a fuel tank capacity of 8.4 US gallons (7 UK gallons or 32 liters), making it suitable for economical and extended drives.

Safety Features:
Safety was a priority, with standard features such as a driver's airbag, side impact bars, 3-point safety belts, and child car restraints.

Interior Amenities:
The Pleo 660 L boasted power windows, power steering, centralized door locks, and keyless entry, enhancing the convenience and comfort of its passengers.

Exterior:
While it didn't include extravagant exterior features like sunroofs or spoilers, it did come with practical elements such as power-adjustable door mirrors and back wipers.

The 2000-2001 Subaru Pleo 660 L was designed with practicality and efficiency in mind, making it a noteworthy choice for those seeking an economical and maneuverable vehicle for their urban journeys.

Engine Specifications of the Subaru Pleo 660 L

The heart of the 2000-2001 Subaru Pleo 660 L lies in its engine, a compact yet efficient powerplant designed to meet the demands of urban driving. Let's delve into the engine specifications of this remarkable kei car.

Engine Code and Type:
Under the hood, the Pleo 660 L housed the EN07 engine. This engine was a water-cooled, four-cylinder, single overhead camshaft (SOHC) unit, known for its reliability and simplicity. It featured an intercooler, which helped enhance its performance.

Displacement and Capacity:
The engine had a displacement of 658cc, which translates to approximately 0.66 liters. This compact size was in line with kei car regulations in Japan, which prioritize fuel efficiency and reduced emissions.

Power Output:
The Pleo's engine delivered a maximum power output of approximately 60.8 PS (60 bhp or 44.7 kW) at 6400 rpm. This power level was well-suited for city driving and ensured the vehicle could navigate through traffic with ease.

Torque Performance:
Torque, the force that enables a car to accelerate, was measured at approximately 74.5 Nm (54.9 lb.ft or 7.6 kg.m) at 4000 rpm. This provided the Pleo with sufficient low-end torque for responsive acceleration.

Fuel Type and Efficiency:
The engine was designed to run on regular gasoline, which was readily available and affordable. The Pleo 660 L excelled in fuel efficiency, with a fuel consumption rating of 42 mpg US (50.4 mpg UK or 5.6 L/100km) in the 10/15 mode, making it an economical choice for daily commuting.

Transmission:
Complementing the engine was an i-CVT (Intelligent Continuously Variable Transmission), which offered a seamless and efficient driving experience. The CVT's ability to adapt to various driving conditions further contributed to the Pleo's fuel-efficient performance.

Additional Engine Details:
With a compression ratio of 9, a bore of 5.6 cm (2.2 inches), and a stroke of 6.7 cm (2.63 inches), this engine was optimized for efficiency and practicality within the confines of kei car regulations.

In summary, the 2000-2001 Subaru Pleo 660 L's engine specifications showcased a well-engineered powerplant designed to excel in urban environments. Its compact size, coupled with its efficient performance, made it a reliable choice for those seeking a fuel-efficient and maneuverable vehicle.

Fuel Efficiency and MPG of the Pleo 660 L

Fuel efficiency is a crucial aspect of any vehicle, and the 2000-2001 Subaru Pleo 660 L certainly delivered in this department. Designed with urban commuters in mind, this kei car excelled in providing economical fuel consumption.

City and Highway Efficiency:
The Pleo 660 L earned its reputation as a fuel-sipper, particularly well-suited for city driving. In urban environments, where frequent stops and starts are common, it achieved impressive fuel efficiency. On the open highway, it continued to deliver economical performance, making it versatile for various driving conditions.

Fuel Consumption Ratings:
In the 10/15 mode, which represents a mix of city and highway driving, the Pleo 660 L achieved a remarkable fuel consumption rate of 42 mpg US (50.4 mpg UK or 5.6 L/100km). These numbers made it an attractive option for drivers looking to minimize fuel expenses.

Economical Engine and Transmission:
The Pleo's engine, with its compact size and efficient design, played a significant role in its impressive fuel economy. Combined with the i-CVT (Intelligent Continuously Variable Transmission), which adjusted seamlessly to driving conditions, the Pleo 660 L ensured that every drop of fuel was used efficiently.

Compliance with Kei Car Regulations:
The vehicle's 658cc engine and adherence to kei car regulations in Japan contributed to its stellar fuel efficiency. These regulations prioritize compactness and reduced emissions, resulting in vehicles like the Pleo that are not only economical but also environmentally friendly.

Practical for Daily Commuting:
For daily commuters navigating congested city streets or those looking for a budget-friendly option, the Pleo 660 L's fuel efficiency made it a practical choice. It allowed drivers to go longer distances with fewer trips to the fuel pump, saving both time and money.

In essence, the 2000-2001 Subaru Pleo 660 L stood out as an efficient and economical vehicle in terms of fuel consumption. Its ability to deliver impressive miles per gallon (MPG) ratings, particularly in urban driving conditions, made it a reliable and budget-friendly choice for daily commuting.

Fuel Tank Capacity in the Pleo 660 L

The fuel tank capacity of the 2000-2001 Subaru Pleo 660 L was designed to strike a balance between compactness and practicality. Understanding the fuel tank capacity is essential for drivers who want to gauge their vehicle's range and refueling needs.

Compact yet Sufficient:
The Pleo 660 L featured a fuel tank with a capacity of 8.4 US gallons (7 UK gallons or 32 liters). This capacity, while modest, was well-suited for the vehicle's purpose as a kei car primarily intended for urban driving.

Ideal for Urban Commuting:
The compact size of the fuel tank allowed for efficient use of space within the vehicle, which was crucial given the Pleo's overall compact dimensions. This design consideration ensured that the vehicle remained lightweight and maneuverable, ideal for navigating city streets and traffic.

Balancing Efficiency and Refueling Frequency:
With its impressive fuel efficiency, achieving approximately 42 mpg US (50.4 mpg UK or 5.6 L/100km) in the 10/15 mode, the Pleo 660 L managed to cover considerable distances on a single tank of fuel. This minimized the frequency of refueling stops, adding convenience to the driving experience.

Urban-Focused Range:
The 8.4 US gallon fuel capacity provided the Pleo 660 L with a range suitable for urban commuting. For daily city driving or short to medium-distance trips, this capacity was more than sufficient, allowing drivers to go about their daily routines without frequent stops at the gas station.

In summary, the 2000-2001 Subaru Pleo 660 L featured a fuel tank with a capacity of 8.4 US gallons (7 UK gallons or 32 liters), striking a balance between compactness and practicality. This capacity, coupled with the car's impressive fuel efficiency, made it an ideal choice for urban commuters seeking convenience and economical driving.

Dimensions and Sizes of the Pleo 660 L

Understanding the dimensions and sizes of the 2000-2001 Subaru Pleo 660 L is essential to gauge its practicality, maneuverability, and interior space. This kei car was designed to maximize usability within its compact footprint.

Exterior Dimensions:
- Length: The Pleo 660 L measured approximately 339.5 cm (133.66 inches) in length. This compact length allowed for easy maneuvering in crowded city streets and parking spaces.
- Width: With a width of around 147.5 cm (58.07 inches), the Pleo was narrow enough for urban driving while providing adequate interior space.
- Height: Standing at approximately 157.5 cm (62 inches) in height, it maintained a low profile, contributing to its stability and reduced wind resistance.

Interior Dimensions:
- Length: Inside the cabin, the Pleo offered an interior length of about 168.5 cm (66.33 inches), providing comfortable seating for passengers.
- Width: The interior width was around 122 cm (48.03 inches), allowing for a cozy yet functional cabin space.
- Height: The interior height stood at approximately 127 cm (50 inches), offering sufficient headroom for occupants.

Wheelbase and Axle Length:
- Wheelbase: The wheelbase, measuring at 231 cm (90.94 inches), contributed to the vehicle's stability and smooth ride.
- Front and Rear Axle Length: The front axle length was approximately 128.5 cm (50.59 inches), while the rear axle measured around 126 cm (49.6 inches).

Ground Clearance and Weight:
- Ground Clearance: The Pleo 660 L had a ground clearance of 15 cm (5.9 inches), ensuring it could navigate road imperfections with ease.
- Weight: The vehicle had a weight of 830 kg (1829 lbs), making it a lightweight option in its class.

Seating and Doors:
- Seating: The Pleo could accommodate up to four passengers comfortably.
- Doors: It featured five doors, ensuring easy access for passengers.

Turning Circle:
- The minimum turning circle, or turning diameter, was approximately 4.6 meters, enhancing the car's maneuverability in tight spaces.

The dimensions and sizes of the 2000-2001 Subaru Pleo 660 L were carefully balanced to provide practicality in urban driving conditions. Its compact exterior dimensions and well-utilized interior space made it an ideal choice for those seeking an efficient and maneuverable vehicle for daily commuting.

Wheel Options for the Pleo 660 L

The 2000-2001 Subaru Pleo 660 L was designed to offer practicality and efficiency, and its wheel options were no exception. The selection of wheels contributed to the vehicle's performance and overall driving experience.

Standard Wheels:
- The Pleo 660 L came equipped with standard wheel options, featuring 155/65 R13 tires on all four wheels. These wheels struck a balance between providing adequate traction and maintaining a comfortable ride.

Aluminium Disks:
- As part of its standard configuration, the Pleo included aluminum disks. These lightweight disks not only contributed to the vehicle's overall efficiency but also enhanced its agility and handling.

The choice of standard wheels and aluminum disks was in line with the vehicle's focus on fuel efficiency, maneuverability, and urban driving. These wheel options ensured a comfortable and reliable driving experience while adhering to the practicality that the Pleo 660 L was known for.

Trim Levels and Features

The 2000-2001 Subaru Pleo 660 L offered various trim levels, each designed to cater to specific preferences and needs of drivers. While the available features could vary depending on the trim level and market, here's a general overview of what you might find:

Base Trim:
- The base trim of the Pleo 660 L typically included essential features for a comfortable and convenient driving experience.
- Standard features often encompassed power windows, power steering, and centralized door locks, enhancing ease of use and comfort.

Additional Trims:
- Depending on the market and specific model variants, additional trim levels might have been available, offering extra features and customization options.
- Some upgraded trims could include power-adjustable door mirrors for added convenience.
- While leather seats and advanced infotainment systems were not common in kei cars like the Pleo, certain markets might have offered optional upgrades.

Interior Comfort:
- Regardless of the trim level, the Pleo prioritized interior comfort and usability. Its compact yet well-designed cabin offered a pleasant driving environment.
- Practicality was emphasized, with well-thought-out storage compartments and a layout that maximized interior space.

Safety Features:
- The Pleo 660 L typically came equipped with safety features such as a driver's airbag, side impact bars, safety belt pretensioners, and child car restraints, ensuring a level of safety for occupants.

Economical Focus:
- One common theme among all trim levels of the Pleo was their economical focus. The vehicle excelled in fuel efficiency, making it an economical choice for daily commuting.

Optional Accessories:
- In addition to trim levels, Subaru often offered optional accessories and packages that allowed buyers to further customize their Pleo according to their preferences.

It's important to note that the availability of specific features and trim levels could vary by region and market, and buyers could select the model that best suited their individual needs and budget. The 2000-2001 Subaru Pleo 660 L aimed to provide practical and efficient transportation, making it a popular choice among those seeking economical and reliable urban mobility.

Generational Changes and Updates

The 2000-2001 Subaru Pleo 660 L represented a specific generation within the Pleo lineup, and during this period, several changes and updates were introduced to enhance the vehicle's appeal and functionality.

Model Year 2000 Updates:
- In the year 2000, the Pleo 660 L received incremental updates in various aspects, with a focus on improving overall performance and efficiency.
- These updates often included fine-tuning the engine and transmission for better fuel economy and smoother operation.
- Safety features continued to evolve, with a strong emphasis on meeting or exceeding safety standards.

Model Year 2001 Enhancements:
- In the following year, 2001, the Pleo 660 L underwent further refinements to maintain its competitiveness in the kei car segment.
- These enhancements might have included minor design changes, adjustments to interior features, or technology upgrades if applicable.
- The goal was to ensure that the Pleo remained a practical and reliable choice for urban drivers.

Kei Car Regulations Compliance:
- Throughout its production, the Pleo remained compliant with kei car regulations in Japan. These regulations aimed to promote fuel efficiency, compactness, and reduced emissions, all of which contributed to the Pleo's appeal in its target market.

Market-Specific Variations:
- Depending on the specific market or region, there might have been variations in available trims, features, or optional accessories.
- Subaru often tailored its vehicles to suit the preferences and needs of different markets, so variations in features and updates could be expected.

Overall, the 2000-2001 Subaru Pleo 660 L underwent generational changes and updates that were primarily focused on refining its performance, safety, and overall practicality. These updates aimed to ensure that the Pleo remained a relevant and attractive choice for urban commuters during its production years.

Fuel Consumption Rates in Real-world Conditions

Real-world fuel consumption rates are a critical consideration for drivers, as they provide a practical understanding of a vehicle's efficiency in everyday conditions. The 2000-2001 Subaru Pleo 660 L was known for its commendable fuel economy, even in real-world scenarios.

City Driving Efficiency:
- In urban environments, where stop-and-go traffic is common, the Pleo 660 L displayed its efficient nature by delivering impressive fuel economy.
- Drivers often reported favorable fuel consumption rates during city commutes, thanks to the car's compact size and efficient powertrain.

Highway Fuel Efficiency:
- On the open highway, the Pleo 660 L continued to shine in terms of fuel efficiency.
- Its engine and transmission combination, designed for both urban and highway driving, allowed it to maintain economical fuel consumption rates even at higher speeds.

Balancing Performance and Economy:
- The Pleo's 658cc engine, though modest in size, struck a balance between performance and economy, ensuring that drivers could navigate various road conditions without compromising fuel efficiency.

Compliance with Kei Car Regulations:
- The Pleo's adherence to kei car regulations, which emphasize reduced emissions and fuel efficiency, contributed to its reputation for economical fuel consumption.
- These regulations aimed to create vehicles that were not only practical but also environmentally friendly.

Real-world Verification:
- Driver experiences and reviews often confirmed the Pleo's ability to achieve fuel consumption figures that were in line with or even better than official ratings.
- This made the Pleo 660 L a trusted choice for those who prioritized fuel efficiency in their daily commuting.

In essence, the 2000-2001 Subaru Pleo 660 L delivered real-world fuel consumption rates that aligned with its reputation for efficiency. Whether navigating city streets or cruising on the highway, this kei car demonstrated its ability to provide economical fuel consumption in everyday driving conditions.

Fuel Capacity for Long Journeys

Long journeys often require careful consideration of a vehicle's fuel capacity to ensure uninterrupted travel. The 2000-2001 Subaru Pleo 660 L, despite its compact size, had a fuel tank that provided sufficient capacity for extended trips.

Fuel Tank Capacity:
- The Pleo 660 L was equipped with a fuel tank capacity of 8.4 US gallons (7 UK gallons or 32 liters).
- This capacity allowed drivers to cover considerable distances on a single tank of fuel, making it suitable for long journeys between refueling stops.

Economical Fuel Consumption:
- The Pleo's reputation for fuel efficiency complemented its fuel tank capacity. With its economical engine and efficient transmission, the vehicle maximized the use of available fuel.

Versatile Travel:
- Whether embarking on a cross-country road trip or a lengthy highway journey, the Pleo's fuel capacity ensured that drivers had the flexibility to plan their routes without constant concerns about refueling.

Balancing Efficiency and Convenience:
- The combination of a moderate fuel tank size and impressive fuel economy allowed the Pleo 660 L to strike a balance between efficiency and convenience.
- Drivers could enjoy extended drives without the need for frequent stops at gas stations, optimizing both time and travel experiences.

Peace of Mind:
- The Pleo's fuel capacity provided peace of mind for drivers, reducing the stress associated with long journeys where access to refueling stations might be limited.

In summary, the 2000-2001 Subaru Pleo 660 L offered a fuel tank capacity that, when combined with its efficient engine and transmission, made it a reliable choice for long journeys. This capacity allowed drivers to explore extended routes with confidence, emphasizing convenience and practicality for those seeking a kei car for their travel needs.

Average Fuel Economy (MPG) for City and Highway Driving

The 2000-2001 Subaru Pleo 660 L delivered commendable average fuel economy figures, both in city and highway driving conditions, making it an economical choice for various types of journeys.

City Fuel Economy (MPG):
- In city driving scenarios, where frequent stops and starts are common, the Pleo 660 L showcased its efficiency.
- The vehicle typically achieved an impressive city fuel economy rating, providing drivers with economical travel within urban environments.

Highway Fuel Economy (MPG):
- On the open highway, the Pleo continued to excel in terms of fuel efficiency.
- Its design, including its aerodynamics and powertrain, contributed to excellent highway fuel economy figures.

Balancing Performance and Efficiency:
- The Pleo's 658cc engine was designed to balance performance and efficiency, ensuring that drivers could enjoy both power and economical fuel consumption.
- The transmission system, including the i-CVT, played a role in optimizing fuel efficiency in various driving conditions.

Compliance with Kei Car Regulations:
- Adherence to kei car regulations, which prioritize reduced emissions and fuel efficiency, contributed to the Pleo's reputation for economical fuel consumption in both city and highway environments.

Real-world Verification:
- Driver experiences and reviews often confirmed that the Pleo 660 L's average fuel economy figures aligned with or exceeded official ratings.
- This real-world verification added to the vehicle's credibility as an efficient choice for drivers.

In essence, the 2000-2001 Subaru Pleo 660 L offered competitive average fuel economy figures for both city and highway driving conditions. Whether navigating urban streets or embarking on long highway journeys, this kei car provided drivers with economical travel options, emphasizing efficiency and practicality in various driving scenarios.

Notable Advantages of the Pleo 660 L

The 2000-2001 Subaru Pleo 660 L was a kei car that garnered attention for several notable advantages, making it a compelling choice for urban drivers seeking a practical and efficient vehicle.

1. Exceptional Fuel Economy:
- One of the standout advantages of the Pleo 660 L was its exceptional fuel economy. It excelled in both city and highway driving scenarios, allowing drivers to save on fuel costs while reducing their environmental footprint.

2. Maneuverability and Compactness:
- The Pleo's compact dimensions and tight turning circle made it highly maneuverable, ideal for navigating congested city streets and tight parking spaces.
- Its nimble handling and lightweight design contributed to its overall agility.

3. Compliance with Kei Car Regulations:
- Being a kei car, the Pleo 660 L adhered to regulations that emphasized fuel efficiency and reduced emissions. This compliance not only benefited the environment but also resulted in lower ownership costs.

4. Practical Interior Design:
- Inside the cabin, the Pleo offered practicality and functionality. It maximized interior space, ensuring that passengers could ride comfortably despite its compact size.
- Thoughtful storage compartments added to its usability.

5. Reliability and Low Maintenance:
- Subaru's reputation for reliability extended to the Pleo. Its durable construction and efficient engine design often meant lower maintenance costs for owners.

6. Suitable for Daily Commuting:
- Whether it was daily commuting or short-distance errands, the Pleo proved itself as a dependable companion for urban drivers. Its fuel efficiency and ease of use made it an ideal choice for city life.

7. Real-world Efficiency:
- The Pleo's real-world efficiency, often confirmed by driver experiences, added to its appeal. Owners appreciated that its fuel consumption figures closely matched or exceeded official ratings.

In summary, the 2000-2001 Subaru Pleo 660 L boasted notable advantages that included exceptional fuel economy, maneuverability, compliance with regulations, practical interior design, reliability, and suitability for daily commuting. These advantages combined to make it a well-rounded and appealing option for those seeking an efficient and practical urban vehicle.

Common Maintenance and Repair Considerations

Owning a vehicle, including the 2000-2001 Subaru Pleo 660 L, comes with common maintenance and repair considerations to ensure its longevity and reliability. Here are some key factors that Pleo owners should keep in mind:

Regular Oil Changes:
- Routine oil changes are essential to maintain the health of the engine. Adhering to the manufacturer's recommended oil change intervals is crucial to prevent engine wear and maintain performance.

Scheduled Maintenance:
- Following the manufacturer's recommended maintenance schedule is vital. This includes regular inspections, fluid checks, and replacement of worn parts as needed. Staying on top of maintenance helps prevent unexpected breakdowns.

Tire Care:
- Proper tire maintenance is crucial for safety and fuel efficiency. Regularly check tire pressure, alignment, and tread wear. Rotating tires according to the manufacturer's guidelines helps ensure even wear.

Brake System Maintenance:
- Brake pads and rotors should be inspected regularly to ensure optimal braking performance. Replacing brake components as they wear down is essential for safety.

Suspension and Steering Components:
- Components like struts, shocks, and steering components should be inspected for wear and tear. Damaged suspension or steering parts can affect ride quality and safety.

Exhaust System Inspections:
- Regularly inspect the exhaust system for leaks or damage. A well-maintained exhaust system helps reduce emissions and ensures efficient engine operation.

Electrical System Checks:
- The electrical system, including the battery and charging system, should be periodically inspected. A failing battery or charging system can lead to starting issues.

Fluid Maintenance:
- Keep an eye on all vehicle fluids, including coolant, transmission fluid, and brake fluid. Ensure that levels are adequate, and fluids are in good condition. Regular fluid changes are part of routine maintenance.

Addressing Warning Lights:
- If any warning lights appear on the dashboard, address them promptly. Ignoring warning lights can lead to more significant and costly issues down the road.

Professional Inspections:
- Periodic professional inspections by a certified technician can catch potential problems early. This proactive approach can save both time and money on repairs.

Use Genuine Parts:
- When replacement parts are necessary, consider using genuine Subaru parts. These are designed specifically for the Pleo and can ensure proper fit and function.

In summary, common maintenance and repair considerations for the 2000-2001 Subaru Pleo 660 L include regular oil changes, scheduled maintenance, tire care, brake system maintenance, inspection of suspension and steering components, exhaust system checks, electrical system maintenance, fluid checks, addressing warning lights, periodic professional inspections, and the use of genuine parts when needed. By staying proactive in maintenance and addressing issues promptly, Pleo owners can enjoy the longevity and reliability of their vehicle.

Ownership Experiences and Reviews

Ownership experiences and reviews of the 2000-2001 Subaru Pleo 660 L provide valuable insights into what it's like to own and drive this compact kei car. Here are some common themes and observations from Pleo owners:

1. Fuel Efficiency: Many owners praise the Pleo 660 L for its exceptional fuel efficiency. They often mention that it lives up to its reputation as a kei car designed for economical commuting, helping them save on fuel costs.

2. Maneuverability: Owners appreciate the Pleo's compact size and tight turning radius, making it easy to navigate through crowded city streets and fit into tight parking spots. Its nimble handling is often cited as a significant advantage.

3. Reliability: Subaru's reputation for reliability extends to the Pleo. Owners commonly report that the vehicle is dependable and requires minimal maintenance when properly cared for.

4. Practical Interior: Despite its small exterior dimensions, the Pleo's interior design is often commended for its practicality. Owners find the cabin to be well-organized with ample storage space and comfortable seating for its size.

5. Urban Commuter's Dream: Many Pleo owners view it as an ideal choice for urban commuting. Its fuel efficiency, compactness, and ease of use align perfectly with the demands of city life.

6. Real-world Efficiency: Several owners note that the Pleo's real-world fuel consumption matches or even exceeds official ratings. This reassures them that they made a wise choice in terms of economy.

7. Maintenance and Parts Availability: Owners generally find maintenance to be straightforward and parts relatively easy to source. This adds to the overall affordability of ownership.

8. Kei Car Benefits: Some owners appreciate the advantages that come with owning a kei car, such as lower taxes and insurance premiums in certain regions.

9. Limited Space: While the Pleo's compact size is an advantage for city driving, some owners mention that the limited cargo space may be a drawback for longer trips or carrying bulky items.

10. Performance Trade-off: A few owners acknowledge that while the Pleo excels in efficiency and practicality, it may not offer the same level of performance as larger vehicles. However, they consider this a fair trade-off for its advantages.

Overall, ownership experiences and reviews of the 2000-2001 Subaru Pleo 660 L paint a positive picture of this kei car. Owners value its fuel efficiency, maneuverability, reliability, and practicality, making it a popular choice for those seeking economical and hassle-free transportation in urban environments.

Conclusion: A Look Back at the Subaru Pleo 660 L (2000-2001)

Reflecting on the 2000-2001 Subaru Pleo 660 L offers a glimpse into the appeal and enduring legacy of this compact kei car. During its production years, the Pleo 660 L managed to capture the hearts of urban drivers seeking a practical, efficient, and reliable mode of transportation. Here's a look back at what made the Pleo 660 L a noteworthy choice:

Economy Champion: The Pleo 660 L earned its reputation as an economy champion, with exceptional fuel efficiency both in city and highway driving conditions. Its economical nature appealed to budget-conscious drivers.

Urban-Friendly: This kei car's compact dimensions and impressive maneuverability made it ideally suited for city life. Navigating through congested streets and finding parking spots was a breeze for owners.

Dependable Performance: Subaru's commitment to reliability extended to the Pleo. Owners often found it to be a dependable and low-maintenance vehicle, which contributed to its popularity.

Real-World Efficiency: Pleo owners frequently reported that the vehicle's real-world fuel consumption aligned with or exceeded official ratings, instilling confidence in its efficiency.

Practical Interior: Despite its small size, the Pleo offered a well-designed interior with practical storage solutions and comfortable seating, enhancing the driving experience.

Kei Car Benefits: The Pleo 660 L benefitted from being a kei car, including potential tax and insurance advantages in certain regions, which added to its appeal.

Notable Advantages: Owners appreciated its remarkable fuel economy, maneuverability, and suitability for daily commuting, recognizing these as standout advantages.

While it may not have been the most powerful or feature-rich vehicle, the 2000-2001 Subaru Pleo 660 L carved out a niche for itself as a reliable and economical choice for urban drivers. Its legacy lives on as a testament to the enduring popularity of kei cars that offer practicality and efficiency in an ever-evolving automotive landscape.

FAQ: Your Top Questions About the 2000-2001 Subaru Pleo 660 L Answered

What are the key differences between the 2000 and 2001 Subaru Pleo 660 L models?

The 2000 and 2001 Pleo 660 L models share many similarities, but the 2001 version might have received minor updates or enhancements in terms of performance, safety features, or interior design. These changes are usually incremental, so both years largely offer the same driving experience.

Can you tell me more about the different trim levels or complectations available for the 2000-2001 Subaru Pleo 660 L?

The Pleo 660 L typically comes in one primary trim level for each year within this range. These trim levels usually offer similar features and specifications, emphasizing the car's practicality and efficiency. Specific trim level names may vary depending on the market or region.

What were the available engine options for the 2000-2001 Subaru Pleo 660 L?

The Pleo 660 L was equipped with a 658cc engine with the code EN07. This engine was designed for efficient performance and excellent fuel economy, making it well-suited for city driving and urban commuting.

Were there any significant generational changes or updates between the 2000 and 2001 Subaru Pleo 660 L models?

The 2000-2001 Pleo 660 L models belonged to the same generation, so there were no major generational changes between them. Any updates or enhancements made during this period were typically aimed at improving overall performance, safety, and convenience.

What is the fuel tank capacity of the 2000-2001 Subaru Pleo 660 L, and how does it affect long-distance travel?

The Pleo 660 L is equipped with an 8.4 US-gallon (7 UK-gallon or 32-liter) fuel tank. This capacity allows for extended travel without frequent refueling stops, making it suitable for long-distance journeys.

How does the 2000-2001 Subaru Pleo 660 L perform in terms of real-world fuel efficiency?

Owners often report favorable real-world fuel efficiency for the Pleo 660 L. It delivers impressive fuel consumption figures in both city and highway driving conditions, aligning with its reputation as an economical choice for drivers.

What are the key advantages of owning a 2000-2001 Subaru Pleo 660 L, and how does it excel in urban environments?

The Pleo 660 L excels in urban settings due to its exceptional fuel economy, compact size, and maneuverability. It offers practicality, reliability, and ease of use, making it an ideal choice for daily commuting and navigating city streets.

What common maintenance and repair considerations should owners keep in mind for the 2000-2001 Subaru Pleo 660 L?

Routine maintenance, including oil changes, tire care, and brake system maintenance, is crucial for the Pleo's longevity. Owners should also address warning lights promptly and use genuine parts when needed to ensure reliability.

Can you provide insights from ownership experiences and reviews of the 2000-2001 Subaru Pleo 660 L?

Owners often praise the Pleo for its fuel efficiency, maneuverability, and reliability. They appreciate its practical interior, real-world efficiency, and benefits as a kei car. While it may have limited cargo space, its advantages make it a popular choice for urban drivers.

What makes the 2000-2001 Subaru Pleo 660 L stand out as a budget-friendly and efficient vehicle?

The Pleo 660 L's standout features include exceptional fuel economy, urban-friendly dimensions, and adherence to kei car regulations, all contributing to its reputation as an economical and dependable choice for budget-conscious drivers.


Brian Wong - Senior Reviews Editor of cars-directory.net

Brian Wong / Author

Brian Wong is an accomplished automotive journalist and editor with a passion for cars. With over a decade of experience in the industry, he has established himself as a trusted voice in the automotive community. Brian has written extensively about a wide range of topics in the field, from the latest trends in car design to innovative safety features and emerging technologies. As a senior reviews editor, he is responsible for test driving and analyzing the latest cars on the market, providing readers with accurate and objective reviews. His articles are widely read and respected for their depth of knowledge and analysis. Brian is committed to staying at the forefront of the latest developments in the automotive industry, and is dedicated to sharing his expertise and insights with his readers.

Add Comment

 * - The field should be filled
* Your Name:
 Contact (e-mail, phone...):
* Comments:
Photos: