2005 Subaru Pleo 660 L 4WD Specs

OVERVIEW

With a fuel consumption of 42 mpg US - 50.4 mpg UK - 5.6 L/100km, a curb weight of 2491 lbs (1130 kg), the Subaru Pleo 660 L 4WD has a 4 cylinder SOHC engine, a Regular gasoline engine EN07. This engine EN07 produces a maximum power of 60.8 PS (60 bhp - 44.7 kW) at 6400 rpm and a maximum torque of 74.5 Nm (54.9 lb.ft - 7.6 kg.m) at 4000 rpm. The engine power is transmitted to the road by the four wheel drive (4WD) with a CVT gearbox. For stopping power, the Subaru Pleo 660 L 4WD braking system includes drum at the rear and V disk at the front. Stock tire sizes are 155/65 on 13 inch rims at the rear and 155/65 on 13 inch rims at the front. Chassis details - Subaru Pleo 660 L 4WD has strut rear suspension and strut front suspension for road holding and ride confort.

Add to compare list

- Present
- Option
- Not Present (or Dealer Option)

• Search Car Specs
• Other Pleo Specs Database

More photos Subaru Pleo

By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on April 23, 2024

Introduction

The 2005 Subaru Pleo 660 L 4WD stands as a noteworthy example of compact practicality in the automotive world. This microcar, produced from January 2005 to September 2005, showcases Subaru's commitment to creating vehicles that excel in maneuverability and efficiency.

Equipped with a 658 cm3 engine under the frame name TA-RA2, this iteration of the Pleo series embodies the essence of a true city car. The 4WD drivetrain provides enhanced traction, bolstering its suitability for various road conditions.

Notably, the Pleo 660 L's compact dimensions contribute to its nimble nature. With an exterior length of 339.5 cm, width of 147.5 cm, and height of 155 cm, it navigates urban environments with ease. The interior offers a comfortable haven with an emphasis on space efficiency. The wheelbase of 231 cm complements the compact exterior by optimizing interior room.

With a weight of 910 kg, the Pleo 660 L strikes a balance between agility and stability. It boasts a fuel tank capacity of 32 L, supporting its economic prowess on the road. The engine, designated as EN07, generates a power output of 60.8 PS at 6400 rpm, while the maximum torque of 75 Nm at 4000 rpm ensures responsive performance.

The suspension, with front strut and rear strut setups, contributes to a controlled ride quality. The Pleo 660 L is equipped with standard front fog lamps and ultraviolet glass protection, enhancing safety and convenience.

Inside the vehicle, standard features such as power windows, power steering, and keyless entry underscore the car's focus on modern functionality. The steering column-mounted shifter position and right-hand steering location cater to practicality and driving comfort.

Safety elements include standard driver and passenger airbags, as well as ABS with EBD. The Pleo 660 L embraces practicality by featuring a build-in child seat with the standart Isofix Bar.

The 2005 Subaru Pleo 660 L 4WD reflects an era where compact dimensions met functional design, culminating in a vehicle that embodies urban mobility. Its fusion of efficiency and thoughtful engineering contributes to its lasting appeal as a versatile city companion.

Model Overview

The 2005 Subaru Pleo 660 L 4WD encapsulates the essence of practicality and efficiency in a compact package. As a model within the Pleo series, this iteration is tailored for urban driving and daily commutes. It inherits Subaru's dedication to crafting vehicles that excel in maneuverability while delivering reliable performance.

Featuring a 4WD drivetrain, the Pleo 660 L offers enhanced traction and stability, making it a suitable choice for navigating various road conditions. With a production span from January 2005 to September 2005, this model embodies a snapshot of automotive design and engineering of its time.

The Pleo 660 L's exterior dimensions contribute to its city-friendly demeanor. Its modest length, width, and height allow it to effortlessly maneuver through tight spaces and crowded streets. Inside, the compact exterior doesn't compromise on interior comfort. The wheelbase strikes a balance between space optimization and handling agility.

Under the hood, the Pleo 660 L houses the EN07 engine, delivering ample power for urban driving scenarios. This powerplant is complemented by a continuously variable transmission (CVT) that ensures smooth acceleration and efficient power delivery.

Safety and convenience are underscored by features such as standard driver and passenger airbags, ABS with EBD, and ultraviolet glass protection. The inclusion of Isofix Bar with a built-in child seat emphasizes the model's commitment to family-friendly practicality.

The Pleo 660 L's fuel efficiency aligns with its purpose as a city-focused vehicle. Its fuel tank capacity caters to economical commuting, reflecting its suitability for short-distance drives and errands.

As part of the Pleo series, the 2005 Subaru Pleo 660 L 4WD captures a snapshot of automotive trends and innovations of its era. Its compact size, practical features, and efficiency-oriented design combine to create a versatile urban companion that remains relevant and appealing to this day.

Year Range

The 2005 Subaru Pleo 660 L 4WD was produced during a specific time frame, making it a noteworthy addition to Subaru's lineup for that year. The year range of this model spanned from January 2005 to September 2005, encapsulating a concise period when this particular iteration was available to the market.

Within this time frame, the 2005 Pleo 660 L 4WD contributed to the automotive landscape by offering a compact and practical solution for urban driving needs. Its production during these months showcases Subaru's commitment to providing options that cater to various preferences and requirements of drivers seeking a small and efficient city car.

By focusing on this specific year range, Subaru targeted drivers looking for an economical and maneuverable vehicle option during the early 2000s. The 2005 Pleo 660 L 4WD's presence in the market for this limited time further emphasizes its role as a snapshot of automotive trends, preferences, and engineering priorities of that particular year.

Engine Specifications

The heart of the 2005 Subaru Pleo 660 L 4WD lies in its meticulously engineered engine, a testament to Subaru's dedication to efficiency and performance. Under the hood, the Pleo 660 L 4WD boasts an EN07 engine, a 658 cm3 powerplant designed to strike a balance between power output and fuel efficiency.

With a maximum power output of 60.8 PS at 6400 rpm, this engine delivers reliable performance tailored for urban driving scenarios. The accompanying maximum torque of 75 Nm at 4000 rpm ensures responsive acceleration and smooth cruising even in city traffic.

The 2005 Pleo 660 L 4WD's engine is characterized by its four-cylinder SOHC configuration, reflecting a focus on delivering optimal power delivery while maintaining a compact size. Its compatibility with regular gasoline further contributes to its convenience and accessibility.

This engine's efficiency is further underlined by its fuel consumption, achieving an impressive 42 mpg (US) or 50.4 mpg (UK) in the 10/15 mode test, translating to approximately 5.6 L/100km. This reflects the Pleo's commitment to economical driving, aligning with its role as a compact urban vehicle.

The addition of a supercharger emphasizes Subaru's attention to enhancing performance and responsiveness. While not equipped with features like variable cylinder management (VCM) or a turbo, the 2005 Pleo 660 L 4WD's engine leverages its design to optimize power delivery for urban settings.

In essence, the engine of the 2005 Subaru Pleo 660 L 4WD serves as the beating heart of this compact city car, embodying the brand's commitment to efficiency, practicality, and dynamic performance, all while catering to the demands of urban driving.

Engine Type

At the core of the 2005 Subaru Pleo 660 L 4WD's performance lies its distinct engine type, embodying the blend of engineering prowess and efficiency that defines Subaru's approach. The engine of choice for this model is the EN07, a four-cylinder SOHC configuration that underscores Subaru's commitment to delivering power in a compact package.

The EN07 engine's displacement of 658 cm3 represents a deliberate choice to balance power output with fuel efficiency, a crucial consideration for a compact city car like the Pleo 660 L 4WD. This engine type is tailored to meet the demands of urban driving scenarios, where responsive acceleration and efficient fuel consumption are paramount.

Furthermore, the inclusion of a supercharger enhances the engine's dynamic capabilities. While not equipped with features like variable cylinder management or a turbo, the EN07 engine serves as a testament to Subaru's engineering finesse, focusing on extracting maximum performance from its compact architecture.

The 2005 Pleo 660 L 4WD's engine type showcases Subaru's commitment to innovative solutions that cater to diverse driving needs. The four-cylinder SOHC design, combined with the EN07 engine's compact size, makes it a fitting choice for a city-focused vehicle, embodying Subaru's legacy of delivering reliable performance in a package that prioritizes efficiency and versatility.

Fuel Efficiency

The 2005 Subaru Pleo 660 L 4WD excels in the realm of fuel efficiency, aligning with its purpose as a compact city car designed for economical urban driving. This model is emblematic of Subaru's commitment to crafting vehicles that are not only functional but also considerate of environmental and cost-saving factors.

With a fuel consumption rating of 42 mpg (US) or 50.4 mpg (UK) in the 10/15 mode test, the Pleo 660 L 4WD demonstrates its capability to cover substantial distances while consuming minimal fuel. This translates to approximately 5.6 L/100km, making it an efficient choice for navigating city streets and accomplishing daily errands.

Subaru's dedication to fuel efficiency extends beyond the engine design. The 2005 Pleo 660 L 4WD's lightweight construction and optimized drivetrain contribute to its economic prowess, further enhancing its suitability for urban environments.

Incorporating fuel efficiency into the Pleo 660 L's design aligns with the broader automotive landscape's shift toward sustainability and environmental responsibility. By prioritizing economical fuel consumption without compromising on performance, the 2005 Subaru Pleo 660 L 4WD stands as a testament to Subaru's commitment to creating vehicles that meet the needs of modern drivers while also considering the impact on both the wallet and the environment.

Fuel Consumption

The 2005 Subaru Pleo 660 L 4WD showcases impressive fuel consumption figures, aligning with its role as an efficient urban companion. Designed to cater to the demands of city driving while prioritizing economical fuel use, this model embodies Subaru's commitment to both functionality and cost-effectiveness.

In the 10/15 mode test, the Pleo 660 L 4WD achieves a fuel consumption rating of 42 mpg (US) or 50.4 mpg (UK), equivalent to approximately 5.6 L/100km. This efficient fuel utilization contributes to the model's suitability for short commutes, errands, and everyday journeys within urban environments.

The Pleo 660 L's fuel consumption figures are reflective of its compact design and purpose-driven engineering. Its lightweight construction, combined with its four-cylinder SOHC engine, optimizes fuel efficiency without compromising on responsive performance.

Subaru's emphasis on fuel consumption in the 2005 Pleo 660 L 4WD aligns with the evolving automotive landscape's focus on sustainability and environmental responsibility. By delivering impressive fuel efficiency without compromising driving experience, this model offers a testament to Subaru's ability to harmonize practicality, efficiency, and modern driving expectations.

Fuel Tank Capacity

The 2005 Subaru Pleo 660 L 4WD comes equipped with a thoughtfully sized fuel tank that contributes to its efficiency-focused design. With a fuel tank capacity of 8.4 US gallons or 7 UK gallons (approximately 32 L), this model strikes a balance between providing sufficient range and minimizing the need for frequent refueling.

The chosen fuel tank capacity aligns with the Pleo 660 L's role as a compact city car, emphasizing its suitability for short commutes, urban driving, and everyday errands. The relatively modest fuel tank size is in line with the model's focus on economical fuel consumption and cost-effective urban mobility.

The 2005 Pleo 660 L's fuel tank capacity contributes to its overall efficiency, as the combination of economical fuel consumption and a well-sized fuel tank ensures that drivers can cover reasonable distances without the need for frequent stops at the gas station. This design consideration reflects Subaru's intention to provide a vehicle that harmonizes driving practicality with fuel-saving attributes, making it an ideal choice for navigating city streets while minimizing fuel expenses.

Dimensions and Sizes

The 2005 Subaru Pleo 660 L 4WD is defined by its compact dimensions, tailored to excel in urban settings where space is a valuable commodity. This model's exterior measurements underline its maneuverability and ease of navigation through crowded city streets.

With an exterior length of 339.5 cm, an exterior width of 147.5 cm, and an exterior height of 155 cm, the Pleo 660 L 4WD occupies a compact footprint that makes parking and tight turns hassle-free. The exterior size, encapsulated in the dimensions of 339.5x147.5x155 cm (133.66x58.07x61.02 inches), showcases Subaru's commitment to crafting a vehicle that offers both functional interior space and minimal external bulk.

The interior dimensions continue the theme of space efficiency. An interior length of 168.5 cm, interior width of 122 cm, and interior height of 125.5 cm create an accommodating interior environment while ensuring a comfortable fit within the compact exterior dimensions. The interior size, reflected in the figures 168.5x122x125.5 cm (66.33x48.03x49.4 inches), underscores the Pleo 660 L's aptitude for city-centric driving.

The wheelbase, spanning 231 cm (90.94 inches), contributes to interior space optimization while maintaining stability on the road. The compact yet functional design extends to the front and rear axle lengths, measuring 129 cm (50.78 inches) and 126.5 cm (49.8 inches), respectively.

A ride height or ground clearance of 14 cm (5.51 inches) strikes a balance between maneuverability and road presence. The Pleo 660 L 4WD's weight of 910 kg (2006 lbs) further complements its compact dimensions, enhancing both agility and stability.

With four seats distributed across five doors, the Pleo 660 L 4WD provides a practical and comfortable interior layout. The 2005 Pleo 660 L's dimensions and sizes reflect Subaru's dedication to creating a vehicle that harmonizes space efficiency, maneuverability, and versatility within a compact and functional package, making it an ideal choice for navigating bustling cityscapes.

Wheel Configuration

The 2005 Subaru Pleo 660 L 4WD boasts a well-engineered wheel configuration that enhances its stability, handling, and overall performance on the road. This configuration is a critical component of the model's design, contributing to its agile and responsive nature.

The Pleo 660 L 4WD's wheel configuration features appropriately sized front and rear tires, each with dimensions of 155/65 R13. This selection of tire size strikes a balance between providing adequate grip for city driving and maintaining a comfortable ride quality.

The specific choice of tire dimensions complements the Pleo 660 L's compact dimensions, contributing to its ability to navigate tight spaces and make precise maneuvers. The harmonious pairing of tire size and overall vehicle dimensions reinforces Subaru's focus on creating a well-balanced city car that excels in urban environments.

While not equipped with features like variable gear ratio steering (VGS) or four-wheel steering (4WS), the Pleo 660 L 4WD's wheel configuration is optimized for responsiveness and stability. This configuration aligns with Subaru's commitment to delivering vehicles that are not only practical but also a pleasure to drive, showcasing the brand's dedication to harmonizing engineering with the demands of modern urban mobility.

In essence, the 2005 Subaru Pleo 660 L 4WD's wheel configuration contributes to its overall character as a versatile and nimble city car, underlining Subaru's commitment to engineering vehicles that excel in both practicality and dynamic performance within the context of urban driving scenarios.

Trim Levels

The 2005 Subaru Pleo 660 L 4WD was offered with a distinct trim level that catered to drivers seeking a blend of practicality and efficiency in their city driving experience. This specific trim level encapsulates the Pleo 660 L's focus on urban mobility and modern functionality.

As part of the Pleo series, the 660 L 4WD trim emphasizes the model's compact dimensions and its ability to navigate through city streets with ease. The "660 L" designation signifies a model that prioritizes space optimization and a comfortable interior for both driver and passengers.

Key features of the 2005 Pleo 660 L 4WD trim include the four-wheel drive (4WD) drivetrain, enhancing traction and stability for urban driving scenarios. Additionally, the continuously variable transmission (CVT) ensures smooth acceleration and efficient power delivery, contributing to the model's ease of use in stop-and-go traffic.

While the focus of this specific trim level is on practicality and efficiency, it still incorporates essential features such as power windows, power steering, and keyless entry. These features reflect Subaru's commitment to providing modern conveniences to enhance the driving experience.

The Pleo 660 L 4WD trim's compact size, thoughtful engineering, and efficient design make it an excellent choice for drivers navigating urban environments. By offering a specific trim level that caters to the demands of city driving, Subaru demonstrates its understanding of diverse driver preferences and needs, ensuring that the 2005 Subaru Pleo 660 L 4WD is a versatile and appealing option for those seeking a compact and efficient city car.

Generational Changes

The 2005 Subaru Pleo 660 L 4WD represents a snapshot of its specific generation, embodying the engineering and design priorities of its time. While the 660 L 4WD remains within the Pleo series, it's important to note that generational changes in this model were relatively limited during its production year.

While there might not have been substantial generational overhauls during the span of 2005, the Pleo 660 L 4WD benefited from Subaru's consistent commitment to refining its models. Minor updates in technology, safety features, and perhaps even subtle design elements might have been introduced to enhance the overall driving experience and keep the model current with contemporary expectations.

In terms of its core characteristics, the Pleo 660 L 4WD maintained its compact dimensions, efficient fuel consumption, and responsive performance throughout its production year. These attributes remained constant and were upheld by Subaru's design philosophy.

Generational changes in the 2005 Subaru Pleo 660 L 4WD, while not substantial, serve as a testament to Subaru's understanding of its market and its dedication to continuous improvement. The model's ability to remain relevant and appealing to its target audience underscores Subaru's ability to adapt to evolving driver preferences and the ever-changing automotive landscape.

Conclusion

The 2005 Subaru Pleo 660 L 4WD encapsulates the essence of practicality and efficiency within the realm of compact city cars. Its carefully engineered dimensions, well-considered features, and economical fuel consumption converge to create a vehicle tailored for urban mobility. With a focus on maneuverability, ease of use, and a comfortable interior, the Pleo 660 L 4WD caters to the demands of modern urban lifestyles.

By incorporating a four-wheel drive (4WD) drivetrain and a continuously variable transmission (CVT), Subaru enhances the model's stability and responsiveness in city traffic. The choice of the EN07 engine, coupled with its compact size and supercharger technology, underscores the brand's commitment to harmonizing power and efficiency within a confined space.

The Pleo 660 L 4WD's fuel efficiency, as reflected in its impressive fuel consumption figures, mirrors the model's role as an economical option for short commutes and city driving. The thoughtful design of its compact exterior and interior dimensions not only aids in urban navigation but also provides a comfortable cabin space for both driver and passengers.

In the context of its specific year range and generational position, the 2005 Pleo 660 L 4WD stands as a representation of Subaru's dedication to creating vehicles that cater to a wide range of driving needs and preferences. Its trim level, engineering choices, and design elements align to craft a vehicle that offers a seamless blend of practicality, efficiency, and modern driving comforts, making it a relevant and appealing choice for urban drivers seeking a versatile and agile companion on city streets.

FAQ: Your Guide to the 2005 Subaru Pleo 660 L 4WD