1998 Subaru Pleo 660 L mild charge Specs

OVERVIEW

With a fuel consumption of 41.2 mpg US - 49.5 mpg UK - 5.7 L/100km, a weight of 1829 lbs (830 kg), the Subaru Pleo 660 L mild charge has a 4 cylinder SOHC engine, a Regular gasoline engine EN07. This engine EN07 produces a maximum power of 58.8 PS (58 bhp - 43.2 kW) at 6400 rpm and a maximum torque of 71.5 Nm (52.8 lb.ft - 7.3 kg.m) at 4000 rpm. The engine power is transmitted to the road by the front wheel drive (FF) with a i-CVT gearbox. For stopping power, the Subaru Pleo 660 L mild charge braking system includes Leading trailing drum brake at the rear and Ventilated disk at the front. Stock tire sizes are 155/65 on 13 inch rims at the rear and 155/65 on 13 inch rims at the front. Chassis details - Subaru Pleo 660 L mild charge has dual link strut rear suspension and L type lower arm strut front suspension for road holding and ride confort.

Add to compare list

- Present
- Option
- Not Present (or Dealer Option)

• Search Car Specs
• Other Pleo Specs Database

By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on April 16, 2024

Introduction to the 1998-1999 Subaru Pleo 660 L Mild Charge

The 1998-1999 Subaru Pleo 660 L Mild Charge was a compact and efficient minivan designed to cater to urban commuting and practicality. Falling within the kei car category, it embraced a compact form while offering a comfortable interior for up to four occupants. Produced from October 1998 to May 1999, this model showcases Subaru's commitment to delivering compact solutions without compromising on essential features.

One notable aspect of the Pleo 660 L Mild Charge is its drivetrain configuration—Front-Wheel Drive (FF). This setup contributes to nimble handling and maneuverability, crucial for city driving. The vehicle's body type is that of a two-row minivan, which emphasizes space utilization and practicality for both passengers and cargo.

Under the hood, the Pleo 660 L Mild Charge boasts a 658 cm3 engine (Engine Code: EN07) with a SOHC configuration and four cylinders. This engine design, coupled with a charger, allows the vehicle to strike a balance between power output and fuel efficiency. The i-CVT transmission, offering a variety of gear ratios, further enhances the vehicle's efficiency and performance.

In terms of dimensions, the Pleo 660 L Mild Charge occupies a compact footprint—339.5 cm in length, 147.5 cm in width, and 162.5 cm in height. These dimensions make it well-suited for urban parking and navigating tight spaces. The wheelbase of 231 cm contributes to stability and interior roominess.

Inside, the vehicle offers a well-organized space, with essential features such as power windows and power steering as standard. Its interior dimensions include an interior length of 168.5 cm, interior width of 122 cm, and interior height of 127 cm, ensuring a comfortable cabin for occupants. The availability of four seats distributed across five doors emphasizes practicality.

Safety features include a driver's airbag as standard and an optional passenger airbag. The Pleo 660 L Mild Charge's safety design is supported by side impact bars, safety belt pretensioners, and a 3-point safety belt system, underscoring its commitment to passenger protection.

The Pleo 660 L Mild Charge is an embodiment of Subaru's approach to creating vehicles that excel in urban settings. Its compact size, efficient engine, and thoughtfully designed interior make it a notable choice for those seeking a practical yet comfortable commuting solution.

Engine Specifications and Options

The heart of the 1998-1999 Subaru Pleo 660 L Mild Charge lies in its compact yet capable engine. This kei car is equipped with an engine designed to strike a balance between power and fuel efficiency, making it an ideal companion for city journeys.

At its core, the Pleo 660 L Mild Charge features a 658 cm3 engine with the code EN07. This four-cylinder engine follows a Single Overhead Cam (SOHC) configuration, contributing to a compact design and efficient power delivery. The addition of a charger further enhances its performance characteristics.

The engine's output is notable, with a maximum power of 58.8 PS (58 bhp) or 43.2 kW generated at 6400 rpm. This power output is designed to provide ample acceleration for urban driving scenarios. Accompanying this power is a maximum torque of 71.5 Nm (52.8 lb.ft) or 7.3 kg.m, achieved at 4000 rpm. This torque profile contributes to responsive performance across various driving conditions.

The Pleo 660 L Mild Charge employs a Regular gasoline fuel type, a common choice for vehicles in this class. The engine's efficiency is further highlighted by its fuel consumption figures. In the 10/15 mode, it achieves an impressive fuel consumption of 41.2 mpg US (49.5 mpg UK) or 5.7 L/100km, making it economical for everyday use.

The i-CVT transmission with multiple gear ratios enhances the vehicle's versatility. It offers a range of ratios including 1st to 7th gears, each calibrated to optimize power delivery and fuel efficiency across different speed ranges.

This engine's compact size and performance characteristics align with the Pleo 660 L Mild Charge's role as a nimble city commuter. Its design and specifications ensure that drivers experience a harmonious blend of power, efficiency, and maneuverability, making it well-suited for the demands of urban environments.

Trim Levels and Variants

The 1998-1999 Subaru Pleo 660 L Mild Charge offered a selection of trim levels and variants to cater to diverse preferences within the kei car segment. Each trim level came with its own set of features, enhancing the overall driving experience and comfort.

The Pleo 660 L Mild Charge, being a kei car, primarily focused on efficient urban commuting while delivering value to its drivers. Despite the compact dimensions, it aimed to provide an array of options that could align with various needs.

Standard features across all trim levels included essential amenities like power windows and power steering. These features added convenience to daily urban drives, making maneuvering through traffic and parking hassle-free.

The interior layout of the Pleo 660 L Mild Charge remained consistent across its trim levels, with a four-seat configuration spread across five doors. This design allowed for easy access to both the front and rear seats, ideal for short city trips or small-group commuting.

While the focus was on delivering practicality, some variants of the Pleo 660 L Mild Charge may have offered additional features as options. However, the model's core appeal lay in its efficient engine and compact size, which catered to the demands of city driving.

By providing a range of trim levels and variants, the 1998-1999 Subaru Pleo 660 L Mild Charge aimed to accommodate a broad spectrum of drivers. Whether one sought a budget-friendly option or desired a few extra features, the Pleo 660 L Mild Charge strived to offer choices that aligned with the preferences of its diverse audience.

Fuel Efficiency and MPG Ratings

The 1998-1999 Subaru Pleo 660 L Mild Charge stands out as an economical choice in the realm of fuel efficiency, designed to provide frugal consumption while navigating the urban landscape. This kei car model is engineered to strike a balance between performance and conserving fuel.

One of the defining features of the Pleo 660 L Mild Charge is its impressive fuel efficiency ratings. The 10/15 mode fuel consumption stands at 41.2 mpg US (49.5 mpg UK) or 5.7 L/100km. This efficiency is a testament to Subaru's commitment to providing a cost-effective and eco-friendly driving experience.

The kei car's lightweight construction and compact dimensions contribute to its exceptional fuel economy. These attributes, coupled with its efficient engine and transmission configuration, allow the Pleo 660 L Mild Charge to optimize every drop of fuel for maximum mileage.

In a world where environmental concerns and rising fuel costs play a significant role in vehicle selection, the Pleo 660 L Mild Charge provides an attractive solution. Its exceptional fuel efficiency makes it an ideal choice for daily commutes and city excursions, offering not only practicality and maneuverability but also a reduced carbon footprint and lower operating costs.

Fuel Tank Capacity and Range

The 1998-1999 Subaru Pleo 660 L Mild Charge is designed to offer not only impressive fuel efficiency but also a practical range that aligns with its role as an urban-centric kei car. A key element that contributes to this is its well-proportioned fuel tank capacity.

With a fuel tank capacity of 8.4 US gallons (7 UK gallons or 32 liters), the Pleo 660 L Mild Charge strikes a balance between frequent refueling and an extended driving range. This capacity is tailored to accommodate the vehicle's efficient engine and lightweight design, ensuring that drivers can cover significant distances on a single tank of fuel.

Considering the exceptional fuel efficiency of the Pleo 660 L Mild Charge, the combination of a moderate fuel tank capacity and impressive mileage per gallon enables drivers to enjoy extended periods between refueling stops. This is especially advantageous for city dwellers and those with daily commuting needs, as it reduces the inconvenience of frequent fueling and enhances the overall driving experience.

The kei car's ability to offer a practical range, alongside its other attributes, underscores its purposeful design to cater to the demands of urban mobility. The Pleo 660 L Mild Charge stands as an efficient and reliable option for those seeking both economical fuel consumption and a convenient driving range for their daily journeys.

Dimensions and Exterior Sizes

The 1998-1999 Subaru Pleo 660 L Mild Charge presents a compact yet functional exterior design, tailored to excel in urban environments. Its dimensions and exterior sizes are carefully crafted to optimize maneuverability while offering adequate space for both passengers and cargo.

Measuring approximately 339.5 cm in length, 147.5 cm in width, and 162.5 cm in height, the Pleo 660 L Mild Charge embodies a compact footprint that's well-suited for navigating crowded city streets and fitting into tight parking spaces. These dimensions make it an agile companion for urban driving, where space can be at a premium.

Inside, the vehicle provides an interior length of about 168.5 cm, an interior width of around 122 cm, and an interior height of approximately 127 cm. These dimensions contribute to a comfortable cabin environment that can accommodate occupants while ensuring an airy feel despite the car's compact exterior.

The wheelbase, spanning about 231 cm, plays a role in the Pleo 660 L Mild Charge's stability and handling. Additionally, the ground clearance of 15 cm allows the vehicle to confidently navigate over road irregularities and speed bumps without compromising its compact design.

The exterior sizes of the Pleo 660 L Mild Charge, combined with its lightweight construction, make it adept at darting through traffic and seamlessly parking in cramped spaces. These attributes enhance its role as a practical and agile urban commuter, aligning with the demands of city life.

Wheel and Tire Configurations

The wheel and tire configurations of the 1998-1999 Subaru Pleo 660 L Mild Charge play a significant role in its overall performance and driving dynamics, especially in the context of urban commuting.

Equipped with appropriately sized tires, the Pleo 660 L Mild Charge maintains a balance between agility and stability on the road. The front tires are typically sized at 155/65 R13, matched by the rear tires with the same dimensions. These tires strike a harmonious equilibrium between grip and fuel efficiency, crucial for city driving scenarios.

The tire dimensions of 155/65 R13 contribute to the vehicle's maneuverability, allowing it to navigate corners with ease and negotiate tight turns commonly found in urban environments. This sizing also aids in providing a comfortable ride by absorbing minor road imperfections.

The wheel configuration ensures proper fitment and support for the tires. While the Pleo 660 L Mild Charge's focus remains on practicality and efficiency, its wheel and tire combination work together to deliver a balanced and controlled driving experience.

Overall, the 1998-1999 Subaru Pleo 660 L Mild Charge's wheel and tire configurations are a testament to the vehicle's thoughtfully engineered design. They enhance its agility, stability, and comfort, making it an ideal choice for maneuvering through bustling city streets.

Interior Features and Space

The interior of the 1998-1999 Subaru Pleo 660 L Mild Charge is thoughtfully designed to maximize space and provide essential features, enhancing the overall comfort and convenience for both the driver and passengers.

Despite its compact exterior, the Pleo 660 L Mild Charge offers an interior layout that optimizes space utilization. The four-seat configuration, distributed across five doors, ensures easy access to both the front and rear seats. This layout is ideal for urban commuting and short trips, where ingress and egress need to be efficient.

Key interior features include power windows and power steering, which come as standard across all trim levels. These features enhance the vehicle's practicality and contribute to a smoother and more comfortable driving experience, particularly in congested city traffic.

The interior dimensions further highlight the Pleo 660 L Mild Charge's commitment to providing a comfortable cabin environment. With an interior length of around 168.5 cm, an interior width of approximately 122 cm, and an interior height of about 127 cm, occupants can enjoy adequate headroom and legroom, making even longer journeys more pleasant.

The Pleo 660 L Mild Charge's interior design aims to create a user-friendly experience, catering to the demands of urban living. While luxury features might take a back seat, the car's focus on practicality, space optimization, and essential amenities make it a suitable choice for individuals seeking an efficient and comfortable commuting companion.

Generational Changes and Improvements

The 1998-1999 Subaru Pleo 660 L Mild Charge represents a specific iteration within the Pleo model range, and while it had a relatively short production span, it still saw notable improvements and adjustments compared to its predecessors.

This particular generation of the Pleo series emphasized practicality, fuel efficiency, and compact design, characteristics that are well-suited for city driving. Over time, the Pleo 660 L Mild Charge aimed to refine these attributes and offer a well-rounded package for urban commuters.

Although the model's generational changes during this period might not have been dramatic, manufacturers often make subtle updates to enhance various aspects of a vehicle. These changes could include improvements to the engine's efficiency, minor adjustments to dimensions for better maneuverability, or refinements to interior features based on user feedback.

The key focus of the Pleo 660 L Mild Charge was to provide a reliable and efficient solution for city driving. Therefore, changes and improvements were likely centered around maintaining or enhancing its core attributes. These iterations could have included tweaks to optimize the engine's performance, enhance fuel efficiency, or incorporate small adjustments to the interior layout to maximize cabin space.

The Pleo 660 L Mild Charge's commitment to efficiency, space utilization, and practicality underscores its role as a vehicle designed to cater to the demands of urban mobility. While generational changes may have been relatively subtle, they contributed to refining and honing the model's overall performance and user experience within the context of city living.

Conclusion and Overall Assessment

The 1998-1999 Subaru Pleo 660 L Mild Charge encapsulates the essence of a practical and efficient urban commuter. Its compact dimensions, combined with a focus on fuel efficiency and maneuverability, make it an ideal companion for navigating bustling city streets and tight parking spaces.

The vehicle's design prioritizes functionality, providing a comfortable interior with essential features like power windows and power steering. The compact yet well-utilized interior space accommodates up to four occupants, making it a suitable choice for small families or individuals with daily commuting needs.

The Pleo 660 L Mild Charge's engine, while modest in size, delivers a commendable balance of power and fuel efficiency. Its efficient engineering and transmission setup contribute to an impressive fuel consumption rate, allowing drivers to make the most of each refueling.

While this iteration of the Pleo model range may not have undergone drastic generational changes, its purposeful design and practical attributes are evident. This kei car is a testament to Subaru's commitment to providing vehicles that cater to urban living.

In conclusion, the 1998-1999 Subaru Pleo 660 L Mild Charge shines as a dependable and economical choice for navigating the demands of city life. Its thoughtful dimensions, fuel efficiency, and functional interior make it a well-rounded option for those seeking a budget-friendly and efficient urban driving experience.

Frequently Asked Questions about the 1998-1999 Subaru Pleo 660 L Mild Charge