1998 Subaru Pleo 660 RM Specs

OVERVIEW

With a fuel consumption of 40.5 mpg US - 48.7 mpg UK - 5.8 L/100km, a weight of 1918 lbs (870 kg), the Subaru Pleo 660 RM has a 4 cylinder SOHC engine, a Regular gasoline engine EN07. This engine EN07 produces a maximum power of 64.8 PS (64 bhp - 47.7 kW) at 6000 rpm and a maximum torque of 89.2 Nm (65.8 lb.ft - 9.1 kg.m) at 3600 rpm. The engine power is transmitted to the road by the front wheel drive (FF) with a i-CVT gearbox. For stopping power, the Subaru Pleo 660 RM braking system includes Leading trailing drum brake at the rear and Ventilated disk at the front. Stock tire sizes are 145/70 on 12 inch rims at the rear and 145/70 on 12 inch rims at the front. Chassis details - Subaru Pleo 660 RM has dual link strut rear suspension and L type lower arm strut front suspension for road holding and ride confort.

Add to compare list

- Present
- Option
- Not Present (or Dealer Option)

• Search Car Specs
• Other Pleo Specs Database

By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on April 19, 2024

Introduction to the 1998-1999 Subaru Pleo 660 RM

The 1998-1999 Subaru Pleo 660 RM emerges as a distinctive kei car, designed and produced during the period of October 1998 to May 1999. Classified as a mini-minivan, this model is equipped with a front-wheel-drive (FF) configuration. Its compact frame, GF-RA1, reflects efficient engineering and versatility.

Under the hood, the Pleo 660 RM houses a 658 cm³ engine, marked by the engine code EN07. This 4-cylinder SOHC engine boasts an output of 64.8 PS and a torque of 89.2 Nm, with a CVT gear ratio of 2.432. The engine is paired with an innovative i-CVT transmission system, contributing to a seamless driving experience.

The exterior dimensions of the Pleo 660 RM emphasize its compact nature. With an exterior length of 339.5 cm, width of 147.5 cm, and height of 162.5 cm, it navigates urban environments with ease. Interior space accommodates four seats within its 168.5 cm length, 122 cm width, and 127 cm height. A modest turning diameter of 4.9 meters ensures nimble maneuverability.

Safety features include standard driver and optional passenger airbags, side impact bars, and a 3-point safety belt. The Pleo 660 RM's suspension system incorporates a dual-link strut at the rear and an L-type lower arm strut at the front. The vehicle's stability is enhanced with standard front and optional rear stabilizers.

The interior of the Pleo 660 RM offers convenience through standard power windows, power steering, and centralized door locking. A tachometer and keyless entry further enhance the driving experience. While the model lacks leather upholstery and adjustable steering, its reclining and removable seats provide flexibility for various configurations.

Exterior design elements include standard front fog lamps, UV glass protection, and roof rails. Notable exclusions are sunroofs and rear wipers. A standard radio and CD player contribute to the vehicle's amenity.

In terms of fuel efficiency, the Pleo 660 RM achieves approximately 40.5 mpg in the 10/15 mode, making it an economical choice for city driving. The compact size and fuel capacity of 32 liters further emphasize its efficiency.

The 1998-1999 Subaru Pleo 660 RM exemplifies the era's focus on compact, practical vehicles designed for urban mobility. Its unique combination of features, dimensions, and performance make it a noteworthy choice for drivers seeking efficiency and versatility in a compact package.

Engine Specifications and Performance

The heart of the 1998-1999 Subaru Pleo 660 RM lies within its engine, an engineering marvel that balances power and efficiency. This kei car is equipped with a compact yet capable 658 cm³ engine, designated by the engine code EN07.

The 4-cylinder SOHC engine generates an impressive output of 64.8 PS, or approximately 64 horsepower, with a maximum torque of 89.2 Nm. This power is delivered at 6000 rpm for the engine's maximum power and at 3600 rpm for its maximum torque, ensuring smooth acceleration and effective performance for urban driving scenarios.

The engine's specifications reflect its engineering prowess. With a compression ratio of 10 and a bore size of 5.6 cm, it efficiently harnesses the energy within its compact design. The stroke length of 6.7 cm further contributes to the engine's responsiveness and power delivery.

The Pleo 660 RM incorporates a charger system that enhances its performance, delivering a spirited driving experience while maintaining fuel efficiency. Paired with a Continuously Variable Transmission (CVT) system that features a gear ratio of 2.432, the engine optimizes power delivery for various driving conditions.

The vehicle's drivetrain is front-wheel-drive (FF), which aids in traction and maneuverability in urban settings. This setup contributes to the Pleo 660 RM's agility and ease of handling, particularly important for navigating tight city streets and crowded areas.

In terms of fuel efficiency, the Pleo 660 RM achieves an average fuel consumption of approximately 40.5 mpg in the 10/15 mode. This economic fuel consumption aligns with the kei car's role as a practical and cost-effective choice for city commuters.

The engine of the 1998-1999 Subaru Pleo 660 RM encapsulates a balance between power and economy, underscoring its suitability for urban driving. The fusion of compact design, responsive performance, and fuel efficiency ensures that the Pleo 660 RM offers a commendable driving experience tailored to the demands of city life.

Fuel Efficiency and Consumption

The 1998-1999 Subaru Pleo 660 RM is designed to deliver exceptional fuel efficiency, making it an ideal choice for cost-conscious city drivers. This kei car achieves its commendable fuel economy through a combination of engineering innovations and smart design choices.

Equipped with a 658 cm³ engine, the Pleo 660 RM boasts an impressive fuel consumption figure of approximately 40.5 mpg in the 10/15 mode. This remarkable efficiency is a testament to Subaru's commitment to providing drivers with economical options without sacrificing performance.

The Pleo 660 RM's engine is optimized for urban driving scenarios, where stop-and-go traffic and short trips are common. The Continuously Variable Transmission (CVT) system further enhances fuel efficiency by seamlessly adjusting gear ratios to match the engine's performance requirements. This results in smooth acceleration and reduced fuel consumption, particularly during low-speed city driving.

Subaru's engineering expertise is evident in the integration of a charger system into the Pleo 660 RM's engine. This system improves power delivery while maintaining fuel efficiency, ensuring that drivers experience a dynamic yet economical ride. The combination of these features allows the vehicle to deliver an outstanding balance between power and economy.

The Pleo 660 RM's relatively compact size and lightweight construction also contribute to its fuel-efficient performance. By minimizing unnecessary weight and optimizing aerodynamics, Subaru has managed to create a kei car that maximizes every drop of fuel.

Whether navigating congested city streets or embarking on short commutes, the 1998-1999 Subaru Pleo 660 RM excels in delivering impressive fuel efficiency. This vehicle stands as a testament to Subaru's commitment to creating practical and economical solutions for urban mobility, allowing drivers to enjoy a smooth and efficient ride while minimizing their environmental impact.

Dimensions and Size

The 1998-1999 Subaru Pleo 660 RM presents a compact and maneuverable profile, perfectly suited for navigating urban environments. Its dimensions and size have been carefully crafted to provide both practicality and versatility to drivers seeking a kei car with a small footprint.

The exterior measurements of the Pleo 660 RM emphasize its compact nature. With an exterior length of 339.5 cm, width of 147.5 cm, and height of 162.5 cm, the vehicle is designed to easily slip through tight city streets and fit into narrow parking spaces. The compact size is complemented by a wheelbase of 231 cm, contributing to the car's agility while maintaining stability.

Inside, the Pleo 660 RM offers a well-designed cabin that maximizes space utilization. With an interior length of 168.5 cm, width of 122 cm, and height of 127 cm, the interior dimensions provide a comfortable environment for up to four passengers. The compact yet thoughtful layout ensures a pleasant experience for both the driver and passengers, even during short city commutes.

The compact size of the Pleo 660 RM is further emphasized by its weight, which stands at 870 kg. This lightweight construction not only contributes to fuel efficiency but also enhances the vehicle's nimbleness and responsiveness on the road.

The Pleo 660 RM's compact dimensions are well-suited for city driving scenarios, allowing drivers to navigate traffic with ease and find parking spots without hassle. The vehicle's modest turning diameter of 4.9 meters enhances its maneuverability, making it a reliable choice for weaving through urban congestion.

With its carefully considered dimensions and size, the 1998-1999 Subaru Pleo 660 RM embodies the essence of a practical and agile city car. This kei car offers the perfect balance between compactness and functionality, catering to drivers who value efficiency and ease of maneuverability in their urban journeys.

Trim Levels and Variants

The 1998-1999 Subaru Pleo 660 RM comes in a selection of trim levels and variants, offering drivers the flexibility to choose the one that best suits their preferences and needs. These trim levels are designed to cater to different tastes and requirements, ensuring that drivers can find a Pleo 660 RM that aligns with their individual priorities.

Each trim level of the Pleo 660 RM is tailored to provide a distinct set of features and amenities, offering a range of options for drivers to consider. While the exact details of the trim levels might vary based on market and regional specifications, the overall philosophy remains consistent: to offer drivers a personalized driving experience.

From the standard features to the available upgrades, the trim levels of the Pleo 660 RM allow drivers to select the combination of elements that matters most to them. This might include interior conveniences, technology enhancements, safety features, and even exterior styling elements.

The Pleo 660 RM's trim levels are designed to accommodate a variety of budgets and preferences. Whether a driver prioritizes efficiency, comfort, or technology, the available trim levels ensure that there is a Pleo 660 RM model that aligns with their needs.

It's important for drivers to explore the different trim levels and variants available for the 1998-1999 Subaru Pleo 660 RM in their region. This will help them make an informed decision and select the version of the vehicle that best matches their expectations and requirements.

Generational Changes and Improvements

The 1998-1999 Subaru Pleo 660 RM represents a significant step in the evolution of the Pleo series, introducing notable changes and improvements that enhance the driving experience. As part of the first generation of Pleo models, the 660 RM showcases Subaru's commitment to refining its kei car lineup.

Compared to its predecessors, the 1998-1999 Pleo 660 RM boasts enhanced engineering and design features that contribute to its appeal. Subaru engineers focused on optimizing the vehicle's compact dimensions to provide a spacious and comfortable interior for up to four passengers. The introduction of a front-wheel-drive (FF) configuration and an i-CVT transmission system enhanced the car's drivability and maneuverability in urban settings.

Under the hood, the Pleo 660 RM is powered by a 658 cm³ engine with the engine code EN07. This engine is designed to strike a balance between power and fuel efficiency, allowing drivers to enjoy a responsive yet economical ride. The inclusion of a charger system in the engine further elevates the car's performance capabilities.

The exterior dimensions of the Pleo 660 RM were carefully crafted to ensure optimal urban mobility. The vehicle's compact length, width, and height make it easy to navigate through city streets and find parking spaces. The lightweight construction of the car contributes to its agility and responsiveness.

Safety and comfort were also key considerations in the design of the Pleo 660 RM. Standard and optional safety features, such as airbags, side impact bars, and safety belt systems, contribute to the car's overall security. Interior features like power windows, power steering, and keyless entry further enhance the driving experience.

The Pleo 660 RM's evolution reflects Subaru's commitment to continuous improvement. By introducing design changes and engineering innovations, the 1998-1999 Pleo 660 RM sets the stage for the future of the Pleo series, highlighting Subaru's dedication to producing kei cars that excel in urban environments.

Wheel Options and Tire Sizes

The 1998-1999 Subaru Pleo 660 RM offers a range of wheel options and tire sizes designed to complement its compact yet capable design. These choices cater to both aesthetics and performance, allowing drivers to personalize their Pleo 660 RM to suit their preferences and driving style.

The Pleo 660 RM is equipped with front and rear tires that boast dimensions of 145/70 R12. These tires strike a balance between stability and maneuverability, providing adequate traction on various road surfaces while contributing to the vehicle's nimble handling characteristics.

For drivers seeking a slightly different tire size, an option is available for 155/65 R13 tires, which can potentially offer a different balance of ride comfort and performance attributes. These tire choices highlight Subaru's consideration of various driving preferences and road conditions.

Wheel options for the Pleo 660 RM vary based on the selected trim level and regional specifications. Subaru offers a selection of wheel designs that not only enhance the car's appearance but also contribute to its overall performance and handling capabilities.

The careful consideration of wheel and tire options underscores Subaru's commitment to providing a customizable driving experience for Pleo 660 RM owners. Whether prioritizing aesthetics, performance, or a combination of both, the available choices ensure that drivers can find the ideal configuration for their urban adventures.

Fuel Tank Capacity and Range

The fuel tank capacity and range of the 1998-1999 Subaru Pleo 660 RM are designed to offer drivers convenience and efficiency during their urban journeys. With a fuel tank capacity of 8.4 US gallons (7 UK gallons or 32 liters), the Pleo 660 RM strikes a balance between frequent refueling stops and extended driving range.

The modest fuel tank capacity aligns with the Pleo 660 RM's role as a city-focused kei car. Its efficient 658 cm³ engine, combined with a charger system, contributes to a commendable fuel economy figure of approximately 40.5 mpg in the 10/15 mode. This fuel efficiency enables drivers to cover longer distances with fewer refueling stops, enhancing the car's practicality for daily commuting and short trips.

The compact dimensions and lightweight construction of the Pleo 660 RM further optimize its fuel efficiency. By minimizing weight and drag, Subaru engineers have ensured that the vehicle's fuel tank capacity translates into a reasonable driving range, allowing drivers to make the most of each tank of fuel.

The 1998-1999 Subaru Pleo 660 RM's fuel tank capacity and range underscore its suitability for urban environments. The combination of efficient engine technology, thoughtful design, and a compact size ensures that drivers can confidently navigate city streets without worrying about frequent visits to the fuel station.

Interior Features and Comfort

The 1998-1999 Subaru Pleo 660 RM offers a thoughtfully designed interior that prioritizes both functionality and comfort. With a focus on providing a pleasant driving experience for both the driver and passengers, the interior features of the Pleo 660 RM enhance the overall appeal of this kei car.

Standard power windows and power steering contribute to the convenience of operating the Pleo 660 RM. These features ensure that adjusting windows and maneuvering the vehicle are effortless tasks, especially crucial in urban driving scenarios.

The inclusion of a tachometer provides the driver with valuable information about the engine's performance, allowing them to gauge acceleration and overall driving dynamics. Centralized door locking further simplifies the driving experience, providing a single point of control for locking and unlocking the doors.

Keyless entry is a standard feature in the Pleo 660 RM, offering modern convenience by eliminating the need for physical keys. This feature streamlines entry and exit from the vehicle, particularly useful for drivers who frequently find themselves in busy urban environments.

The Pleo 660 RM is available in both right-hand drive and left-hand drive configurations, catering to different regional driving norms. The interior layout is designed to accommodate the needs of the driver, ensuring easy access to controls and optimal visibility.

While the Pleo 660 RM lacks certain luxury features like leather seats and adjustable steering, it compensates with its practicality. Reclining and removable seats provide flexibility for configuring the interior space according to various requirements. These features underline the vehicle's adaptability for transporting both passengers and cargo.

In summary, the 1998-1999 Subaru Pleo 660 RM's interior features blend convenience and comfort, catering to the needs of urban drivers. The thoughtful inclusion of standard amenities and ergonomic design elements ensures that occupants can enjoy a pleasant and enjoyable ride, even during short city commutes.

Safety Features and Ratings

The 1998-1999 Subaru Pleo 660 RM places a strong emphasis on safety features, ensuring that drivers and passengers have a secure and protected journey. While safety standards and ratings might vary based on regional specifications, Subaru's commitment to passenger safety is evident in the design and engineering of the Pleo 660 RM.

The vehicle is equipped with a standard driver's airbag, which provides an essential layer of protection in the event of a collision. In certain configurations, an optional passenger airbag is also available, offering added safety for front-seat occupants. These airbags are designed to deploy in the event of an impact, reducing the risk of injury to the driver and front passenger.

Side impact bars are another standard safety feature in the Pleo 660 RM. These bars are strategically integrated into the vehicle's structure to provide additional protection to occupants in the event of a side collision. They contribute to the overall rigidity of the vehicle's frame, enhancing passenger safety.

The Pleo 660 RM's safety belt systems further enhance occupant protection. With standard 3-point safety belts for all seats, passengers are secured during both normal driving and emergency situations. Safety belt pretensioners, where available, offer additional safety benefits by minimizing the slack in the seatbelt during impact.

Child car restraints are a standard feature in the Pleo 660 RM, reflecting Subaru's commitment to ensuring the safety of younger passengers. These restraints are designed to secure child passengers in the back seats, reducing the risk of injury during sudden stops or collisions.

While specific safety ratings might vary, the Pleo 660 RM's safety features reflect Subaru's dedication to passenger well-being. By incorporating features that provide protection in various scenarios, the Pleo 660 RM is designed to offer drivers and passengers peace of mind while navigating urban environments.

Infotainment and Technology

The 1998-1999 Subaru Pleo 660 RM integrates a range of infotainment and technology features designed to enhance the driving experience and keep occupants connected during their urban journeys. While the focus of this kei car is primarily on practicality, Subaru has included thoughtful technological touches to elevate both convenience and entertainment.

The Pleo 660 RM is equipped with a standard radio, providing access to local stations and allowing occupants to enjoy their favorite music and broadcasts. A standard autoreverse cassette player offers additional audio entertainment options, catering to those who still enjoy the nostalgia of physical media.

For drivers who prefer more modern audio solutions, the Pleo 660 RM also features a standard CD player. This provides improved audio quality and the convenience of accessing a wider range of music and content through CDs.

The infotainment system in the Pleo 660 RM is designed with ease of use in mind. The vehicle includes standard power windows, power steering, and centralized door locking, ensuring that drivers can focus on the road without distractions.

It's important to note that while the Pleo 660 RM's infotainment and technology features enhance the driving experience, they are tailored to the car's practical and efficient nature. The integration of these features demonstrates Subaru's commitment to providing drivers with the essential tools they need to stay connected and entertained during their urban adventures.

In summary, the 1998-1999 Subaru Pleo 660 RM strikes a balance between practicality and technology, offering drivers and occupants a range of infotainment features that contribute to an enjoyable and connected driving experience.

Exterior Design and Styling

The 1998-1999 Subaru Pleo 660 RM showcases an exterior design that combines functionality with a touch of modern flair. While its primary focus is on urban mobility, the vehicle's exterior styling demonstrates Subaru's dedication to creating a kei car that stands out on city streets.

The compact dimensions of the Pleo 660 RM contribute to its overall exterior aesthetics. With a length of 339.5 cm, width of 147.5 cm, and height of 162.5 cm, the vehicle presents a tidy and proportionate profile. These dimensions not only enhance the car's maneuverability but also contribute to its visual appeal, making it a natural fit for urban environments.

The Pleo 660 RM's exterior design includes thoughtful details that enhance both form and function. The inclusion of front fog lamps, where available, improves visibility during adverse weather conditions, aiding drivers in navigating through foggy or misty urban surroundings.

The vehicle's exterior features also include ultraviolet (UV) glass protection, which helps to shield occupants from the sun's rays while maintaining optimal visibility. This feature reflects Subaru's commitment to enhancing the driving experience by considering both comfort and safety aspects.

Roof rails are a standard feature in the Pleo 660 RM, providing additional utility for those who require extra cargo-carrying capacity. While not equipped with a sunroof or rear wiper, the vehicle's exterior design strikes a balance between aesthetics and functionality, contributing to its overall identity as a practical city car.

In summary, the 1998-1999 Subaru Pleo 660 RM's exterior design incorporates practical elements that cater to urban driving needs. The combination of compact dimensions, functional features, and thoughtful design details results in a kei car that not only performs well on city roads but also exudes a sense of modernity and purpose in its exterior styling.

Maintenance and Ownership Costs

The 1998-1999 Subaru Pleo 660 RM offers owners a balance between cost-effective ownership and practical urban mobility. When it comes to maintenance and ownership costs, Subaru has taken steps to ensure that drivers can enjoy the benefits of a kei car without breaking the bank.

The Pleo 660 RM's compact design contributes to its affordability in various aspects of ownership. With a smaller overall footprint, the vehicle requires less space for storage and parking, which can translate into lower parking fees in urban areas. Additionally, the kei car classification often results in reduced road taxes and insurance premiums, further lowering the cost of ownership.

Maintenance costs are also kept in check due to the Pleo 660 RM's efficient engineering. The vehicle's 658 cm³ engine is designed for durability and reliability, reducing the likelihood of frequent repairs and replacements. Routine maintenance tasks such as oil changes, tire rotations, and brake checks can be performed at reasonable intervals, contributing to lower ongoing maintenance expenses.

Furthermore, the Pleo 660 RM's fuel efficiency is a significant factor in reducing ownership costs. The vehicle's economical fuel consumption ensures that drivers can cover longer distances with fewer refueling stops, saving both time and money in the long run.

Subaru's commitment to quality and engineering excellence extends to the Pleo 660 RM, contributing to the vehicle's overall longevity. This can result in a more extended ownership period, which not only provides drivers with dependable transportation but also amortizes the initial purchase price over a more extended period.

In conclusion, the 1998-1999 Subaru Pleo 660 RM is designed to offer owners an affordable and practical driving experience. With a focus on fuel efficiency, low maintenance costs, and reduced ownership expenses, this kei car is well-suited for urban dwellers seeking a cost-effective and reliable mode of transportation.

Conclusion: The Legacy of the Subaru Pleo 660 RM

The 1998-1999 Subaru Pleo 660 RM stands as a testament to Subaru's commitment to providing practical and efficient urban mobility solutions. With its compact dimensions, thoughtful engineering, and focus on fuel efficiency, the Pleo 660 RM is well-suited for navigating city streets and addressing the challenges of urban driving.

From its inception, the Pleo 660 RM has aimed to strike a balance between performance and economy. The vehicle's compact size and lightweight construction contribute to its agility and nimbleness, allowing drivers to navigate through congested traffic and find parking with ease.

The introduction of a front-wheel-drive (FF) configuration and an i-CVT transmission system enhances the Pleo 660 RM's drivability, making it a reliable companion for daily commuting and short trips. The vehicle's 658 cm³ engine, coupled with a charger system, emphasizes both power delivery and fuel efficiency, underscoring Subaru's commitment to practical performance.

The Pleo 660 RM's interior features, safety measures, and infotainment options further enhance its appeal as a well-rounded urban vehicle. With a focus on delivering a comfortable and connected driving experience, the vehicle caters to modern drivers who seek convenience and functionality in their vehicles.

While the Pleo 660 RM's legacy is rooted in its 1998-1999 production period, its influence continues to be felt in Subaru's ongoing commitment to developing efficient and practical urban mobility solutions. The vehicle's balance of size, features, and performance has set a precedent for future generations of kei cars, reflecting Subaru's dedication to meeting the evolving needs of urban drivers.

In conclusion, the 1998-1999 Subaru Pleo 660 RM leaves behind a legacy of compact excellence, embodying Subaru's philosophy of practicality and innovation. As a kei car designed for the city, it showcases how careful engineering and design considerations can result in a vehicle that excels in urban mobility while catering to the diverse preferences of modern drivers.

FAQ: Unveiling the Answers to Your Queries about the 1998-1999 Subaru Pleo 660 RM