1999 Subaru Pleo 660 RM Specs

OVERVIEW

With a fuel consumption of 40.5 mpg US - 48.7 mpg UK - 5.8 L/100km, a weight of 1918 lbs (870 kg), the Subaru Pleo 660 RM has a water cooling 4 cycle 4 cylinder DOHC intercooler attaching supercharger engine, a Regular gasoline engine EN07. This engine EN07 produces a maximum power of 64.8 PS (64 bhp - 47.7 kW) at 6000 rpm and a maximum torque of 89.2 Nm (65.8 lb.ft - 9.1 kg.m) at 3600 rpm. The engine power is transmitted to the road by the front wheel drive (FF) with a i-CVT gearbox. For stopping power, the Subaru Pleo 660 RM braking system includes Leading trailing drum brake at the rear and Ventilated disk brakes at the front. Stock tire sizes are 155/65 on 13 inch rims at the rear and 155/65 on 13 inch rims at the front. Chassis details - Subaru Pleo 660 RM has dual link strut independent suspension rear suspension and L type lower arm strut independent front suspension for road holding and ride confort.

Add to compare list

- Present
- Option
- Not Present (or Dealer Option)

• Search Car Specs
• Other Pleo Specs Database

By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on April 19, 2024

Introduction

The "1999-2000 Subaru Pleo 660 RM" marks a significant era in the world of compact minivans. As a product of Subaru, renowned for its commitment to engineering excellence, the Pleo 660 RM captivated the market with its innovative design and functional features. These years were crucial for automotive evolution, and the Pleo 660 RM stood as a testament to Subaru's dedication to quality and performance.

The Pleo 660 RM, part of the Pleo series, was produced from June 1999 to September 2000. Positioned as a front-wheel-drive (FF) minivan with 2 rows of seats, this vehicle catered to urban lifestyles, offering convenience without compromising on style. The i-CVT transmission gearbox with its seamless transitions further elevated the driving experience, making it a pleasure to maneuver through city streets.

At the heart of the Pleo 660 RM resided a compact yet efficient engine. With a displacement of 658 cm³, this water-cooled 4-cylinder DOHC engine boasted an intercooler-attached supercharger, aptly identified by its engine code, EN07. The power output of 64.8 PS and torque of 89.2 Nm made for spirited drives within urban settings. The impressive compression ratio of 9 and a range of gear ratios added to its responsive performance and economical fuel consumption.

One of the standout features of the Pleo 660 RM was its attention to size and dimensions. Its exterior measured 339.5 cm in length, 147.5 cm in width, and 162.5 cm in height. These compact dimensions allowed for easy parking and agile navigation. Inside, the interior offered ample space, with dimensions of 168.5 cm in length, 122 cm in width, and 127 cm in height. With seating for four passengers distributed across five doors, it was designed to accommodate both comfort and practicality.

Safety and convenience were paramount in the Pleo 660 RM's design. Features like standart front spoiler, power windows, and standart safety belt pretensioners ensured a secure and enjoyable ride. While certain advanced features like Xenon lamps and a twin conditioning system were absent, the vehicle catered well to its target audience.

In summary, the "1999-2000 Subaru Pleo 660 RM" encapsulated an era of efficient and versatile minivans. From its compact size to its spirited engine, it merged innovation with practicality. As the automotive landscape evolved, this model carved its niche, and its legacy is still evident in Subaru's commitment to creating vehicles that resonate with a diverse range of drivers.

Overview of Model Years

The years 1999 and 2000 marked a dynamic phase in the legacy of the Subaru Pleo 660 RM. During this period, the model showcased the quintessential Subaru blend of innovation and practicality. As automotive preferences shifted, Subaru remained attentive to evolving needs, reflected in the advancements present in the Pleo 660 RM of this era.

The Pleo 660 RM, part of the Pleo series, seamlessly integrated style and functionality. The attention to detail in its design resonated with drivers seeking a versatile and compact vehicle for urban living. The distinct body type of a 2-row seat minivan served as a canvas for Subaru's engineering prowess. With a focus on space optimization and maneuverability, the Pleo 660 RM catered to the demands of bustling city environments.

At the core of this model's identity was its commitment to providing an efficient driving experience. The inclusion of a continuously variable transmission (i-CVT) showcased Subaru's dedication to refining driving dynamics. This transmission, which eliminated the need for conventional gear shifts, enhanced the vehicle's smoothness and responsiveness. As urban landscapes demanded seamless navigation, the Pleo 660 RM of 1999-2000 adapted admirably.

Amidst this evolution, the Pleo 660 RM retained its character-defining features. The compact engine, with a displacement of 658 cm³, remained a vital component of its design. Equipped with an intercooler-attached supercharger and an engine code of EN07, this powertrain blended power and economy. The engine's design principles reflected Subaru's commitment to optimizing space and fuel efficiency.

Beyond the mechanics, the Pleo 660 RM's size and dimensions were an asset. Its exterior dimensions, tailored for urban streets, combined with the interior's thoughtful layout to create a harmonious driving environment. As Subaru recognized the significance of every inch within the vehicle, these years saw a balance between form and function, capturing the essence of the era's automotive ethos.

In summary, the overview of the 1999-2000 Subaru Pleo 660 RM reveals a vehicle in sync with the pulse of its time. It embodied Subaru's dedication to crafting vehicles that aligned with modern lifestyles and aspirations. As Subaru adapted to changing automotive landscapes, the Pleo 660 RM of this era continued to be an emblem of innovation and pragmatism, setting the stage for the brand's enduring legacy.

Generational Changes

The years 1999-2000 marked a pivotal moment for the Subaru Pleo 660 RM as it navigated through its generational changes. Within this short but impactful span, the model continued to embody the core values of Subaru while incorporating enhancements that reflected evolving automotive preferences.

During this generational transition, the Pleo 660 RM retained its commitment to compactness and urban practicality. The 2-row seat minivan body type remained consistent, catering to drivers seeking maneuverability and adaptability within city environments. Subaru's dedication to creating vehicles that align with modern lifestyles was evident in the model's enduring design.

Under the hood, the Pleo 660 RM maintained its focus on an efficient driving experience. The engine's displacement remained unchanged at 658 cm³, emphasizing the optimization of space without compromising performance. With the inclusion of an intercooler-attached supercharger and the engine code EN07, this iteration showcased the fusion of power and efficiency that Subaru enthusiasts had come to expect.

Generational improvements also extended to the vehicle's driving dynamics. The i-CVT transmission, a hallmark of Subaru's innovation, continued to provide seamless transitions between speeds. This transmission, which eliminated traditional gear shifts, not only contributed to a smoother ride but also showcased Subaru's commitment to adapting to changing driving patterns.

Despite these advancements, the Pleo 660 RM's essence remained intact. Its exterior dimensions remained faithful to the needs of urban drivers, offering a balance between compactness and interior space. The vehicle's focus on practicality and versatility was sustained, ensuring that it remained relevant in an era characterized by shifting preferences.

In summary, the generational changes of the 1999-2000 Subaru Pleo 660 RM underscored Subaru's ability to evolve while preserving the attributes that defined the model. Through a commitment to efficient design, technological enhancements, and adaptability, the Pleo 660 RM continued to resonate with a diverse range of drivers, encapsulating a chapter of Subaru's ongoing legacy.

Engine Variants

The "1999-2000 Subaru Pleo 660 RM" introduced a range of engine variants that exemplified Subaru's commitment to versatile and efficient driving experiences. These engines underscored the brand's ability to cater to diverse preferences while maintaining the core values that defined Subaru vehicles.

The heart of the Pleo 660 RM during this period was the 658 cm³ engine, featuring the engine code EN07. This compact yet potent powertrain was designed to offer an ideal blend of performance and fuel efficiency. The inclusion of an intercooler-attached supercharger demonstrated Subaru's dedication to maximizing power output without compromising on space optimization.

The engine's four-cylinder configuration, coupled with dual overhead camshafts (DOHC), highlighted Subaru's pursuit of balanced power delivery and smoother performance. The water cooling system ensured effective heat management, contributing to the engine's longevity and consistent performance. The 1999-2000 Pleo 660 RM's engine options were emblematic of Subaru's approach to creating engines that were both compact and capable.

As fuel efficiency gained prominence in the automotive landscape, the Pleo 660 RM's engine variants embodied this shift. The Regular gasoline fuel type further underlined the model's suitability for urban driving scenarios, where economical fuel consumption was paramount. The introduction of a charger, in the form of the intercooler-attached supercharger, demonstrated Subaru's commitment to innovative technologies that enhanced engine efficiency.

Overall, the engine variants of the 1999-2000 Subaru Pleo 660 RM illustrated Subaru's responsiveness to changing automotive trends. By offering a range of engines that combined power, efficiency, and innovation, Subaru continued to meet the demands of drivers seeking vehicles that excelled both in urban environments and on the open road.

Fuel Efficiency and Consumption

The "1999-2000 Subaru Pleo 660 RM" placed a strong emphasis on fuel efficiency and consumption, aligning with the growing awareness of eco-conscious driving and cost-effective transportation. During this period, Subaru took notable steps to ensure that the Pleo 660 RM was both economical and environmentally friendly.

Powered by a 658 cm³ engine with an intercooler-attached supercharger, the Pleo 660 RM of 1999-2000 offered a well-balanced equation of power and frugality. This equilibrium was further highlighted by the Regular gasoline fuel type, showcasing Subaru's commitment to designing engines that optimized fuel usage within various driving scenarios.

The introduction of the i-CVT transmission in the Pleo 660 RM contributed significantly to its fuel efficiency. This innovative transmission eliminated the need for traditional gear shifts, ensuring seamless transitions between speeds. This not only enhanced the driving experience but also enabled the engine to operate at its most efficient range, thereby minimizing fuel consumption.

The fuel consumption figures of the Pleo 660 RM attested to its eco-friendly credentials. With a fuel consumption of 40.5 mpg in the 10/15 mode, or 48.7 mpg UK, and 5.8 L/100km, the model demonstrated a conscientious approach to fuel efficiency. This was a pivotal factor in making the Pleo 660 RM an ideal choice for urban drivers seeking to reduce their carbon footprint and fuel expenses.

In summary, the "1999-2000 Subaru Pleo 660 RM" exemplified Subaru's commitment to producing vehicles that were both economical and environmentally responsible. By integrating advanced engine technologies, such as the intercooler-attached supercharger and i-CVT transmission, Subaru offered drivers an opportunity to enjoy efficient, cost-effective, and eco-conscious driving without compromising on performance.

Dimensions and Sizes

The "1999-2000 Subaru Pleo 660 RM" boasted dimensions and sizes that made it exceptionally well-suited for navigating urban landscapes while maintaining a comfortable interior. These considerations were a testament to Subaru's dedication to crafting vehicles that combined practicality with an enjoyable driving experience.

The compact exterior dimensions of the Pleo 660 RM were tailored to urban environments. With an exterior length of 339.5 cm, width of 147.5 cm, and height of 162.5 cm, the vehicle was designed to easily maneuver through tight city streets and parking spaces. This exterior profile not only enhanced agility but also made it an ideal choice for drivers seeking a nimble and versatile option for urban commuting.

Inside the Pleo 660 RM, the dimensions and sizes were thoughtfully arranged to maximize space without sacrificing comfort. The interior length of 168.5 cm provided ample legroom for occupants, while the width of 122 cm ensured that passengers could travel comfortably side by side. The interior height of 127 cm added to the feeling of openness within the cabin, creating an inviting and enjoyable environment for both driver and passengers.

The wheelbase of 231 cm contributed to the vehicle's stability and handling, enhancing the driving experience across various road conditions. Additionally, the ride height or ground clearance of 15 cm struck a balance between providing adequate ground clearance for urban obstacles while maintaining a low center of gravity for stability.

These dimensions were complemented by the vehicle's weight of 870 kg, which played a role in its overall performance and efficiency. The Pleo 660 RM's design and proportions ensured that it could seamlessly navigate the challenges of urban driving while delivering a comfortable and spacious interior, defining it as a versatile and adaptable choice for city dwellers.

In summary, the "1999-2000 Subaru Pleo 660 RM" showcased dimensions and sizes that mirrored Subaru's understanding of urban driving dynamics. By optimizing exterior dimensions, interior space, and weight distribution, Subaru created a vehicle that excelled in urban environments without compromising on comfort or practicality.

Trim Levels and Features

The "1999-2000 Subaru Pleo 660 RM" offered a range of trim levels and features that catered to diverse preferences, underscoring Subaru's commitment to providing a customizable and enjoyable driving experience. These options allowed drivers to select a configuration that aligned with their needs, whether it was focused on practicality or enhanced comfort.

The available trim levels in this era were designed to accommodate a variety of driving requirements. While specific details may vary, these trims included a standard array of features that embodied Subaru's dedication to functionality. Across the range, drivers could expect power windows, power steering, a tachometer, and centralized door locks as standard features, enhancing the convenience of daily driving.

The Pleo 660 RM also accommodated keyless entry, a notable feature that eased access and added a layer of security. Additionally, the vehicle's right-hand drive configuration made it well-suited for markets where this layout is prevalent, further catering to the needs of a diverse customer base.

When it came to interior amenities, the Pleo 660 RM provided an environment that balanced practicality and comfort. Reclining seats, along with removable seats, allowed for flexibility in configuring the interior space to accommodate both passengers and cargo. This adaptability was aligned with the vehicle's minivan body type, making it versatile for different scenarios.

In terms of exterior features, the Pleo 660 RM came standard with a front spoiler and fog lamps, adding both style and functionality. The inclusion of power-adjustable door mirrors exemplified Subaru's attention to convenience, allowing drivers to adjust mirrors effortlessly to suit their driving preferences.

While certain features, such as Xenon lamps and leather seats, may not have been available during this period, the Pleo 660 RM offered a well-rounded selection that met the expectations of drivers who sought a balance between utility and comfort.

In summary, the "1999-2000 Subaru Pleo 660 RM" exemplified Subaru's philosophy of providing a range of trim levels and features to cater to diverse drivers. By combining standard amenities with customizable options, Subaru demonstrated its commitment to creating vehicles that aligned with individual preferences and driving needs.

Wheel Options

The "1999-2000 Subaru Pleo 660 RM" offered a range of wheel options that contributed to both its aesthetic appeal and driving dynamics. While wheel options may have varied based on market specifics, the Pleo 660 RM ensured that its wheels were aligned with the vehicle's compact size and urban-oriented design.

The wheel options available for the Pleo 660 RM were designed to complement its exterior profile, enhancing both its appearance and performance. The presence of 155/65 R13 tires on all four wheels provided a balance between comfort, handling, and efficiency. These tires were well-suited for urban driving scenarios, allowing the vehicle to navigate through city streets with ease.

The 13-inch wheel size contributed to the Pleo 660 RM's maneuverability, ensuring that it could effortlessly navigate tight turns and parking spaces. While larger wheel sizes might have offered a more imposing presence, the chosen wheel options were in line with the vehicle's design philosophy of practicality and agility.

The choice of tires and rims underscored Subaru's attention to creating a cohesive driving experience. By selecting tire dimensions that balanced ride comfort with responsive handling, Subaru ensured that the Pleo 660 RM provided a dynamic and enjoyable urban driving experience.

In summary, the "1999-2000 Subaru Pleo 660 RM" approached wheel options with a focus on enhancing both aesthetics and performance. By offering a standardized set of wheel dimensions that aligned with the vehicle's compact dimensions, Subaru ensured that drivers could navigate urban landscapes with confidence and style.

Fuel Tank Capacity

The "1999-2000 Subaru Pleo 660 RM" excelled in fuel efficiency not only through its engine and design but also by offering a carefully considered fuel tank capacity. The capacity of the fuel tank was designed to strike a balance between providing ample driving range and minimizing the need for frequent refueling, a crucial consideration for urban commuters and those navigating through bustling cityscapes.

With a fuel tank capacity of 8.4 US gallons, equivalent to 7 UK gallons or 32 liters, the Pleo 660 RM ensured that drivers could cover considerable distances without the need for frequent fuel stops. This capacity aligned with the vehicle's focus on efficient driving experiences and contributed to its suitability for urban environments, where convenience and cost savings were of utmost importance.

The carefully chosen fuel tank capacity underscored Subaru's understanding of the needs of urban drivers. With the ability to cover a substantial distance on a single tank of fuel, the Pleo 660 RM provided peace of mind to drivers, allowing them to focus on the journey without constantly monitoring the fuel gauge.

This fuel tank capacity, combined with the model's overall fuel efficiency, made the "1999-2000 Subaru Pleo 660 RM" a practical and economical choice for those seeking an urban-friendly vehicle that could confidently navigate through the city while delivering on both performance and efficiency.

Conclusion

As the "1999-2000 Subaru Pleo 660 RM" took to the streets, it left an indelible mark on the landscape of urban driving. This compact minivan, with its innovative design and practical features, exemplified Subaru's commitment to crafting vehicles that seamlessly blend performance with efficiency. The Pleo 660 RM's dimensions and adaptable interior spoke to its role as a versatile companion for city life, where maneuverability and interior space are equally important.

The Pleo 660 RM's engine variants emphasized the brand's dedication to engineering excellence. With the intercooler-attached supercharger, these engines showcased Subaru's pursuit of power without compromise. The commitment to fuel efficiency and consumption, reflected in its Regular gasoline fuel type and i-CVT transmission, positioned the Pleo 660 RM as an eco-conscious choice without sacrificing driving dynamics.

Subaru's attention to detail extended to the vehicle's features, offering options that catered to individual preferences. From power windows to keyless entry, the Pleo 660 RM balanced practicality with convenience. The inclusion of diverse trim levels provided drivers with the freedom to select a configuration that resonated with their needs and style.

The "1999-2000 Subaru Pleo 660 RM" was more than just a vehicle; it was a reflection of Subaru's commitment to creating cars that enhance the lives of their drivers. From the bustling city streets to the open road, the Pleo 660 RM demonstrated that Subaru's dedication to innovation and adaptability knows no bounds. As time marched forward, this model's legacy continued to inspire subsequent generations of Subaru vehicles, shaping the brand's enduring impact on the automotive world.

Frequently Asked Questions about the 1999-2000 Subaru Pleo 660 RM