1999 Subaru Pleo 660 RM Specs

OVERVIEW

With a fuel consumption of 40.5 mpg US - 48.7 mpg UK - 5.8 L/100km, a weight of 2028 lbs (920 kg), the Subaru Pleo 660 RM has a water cooling 4 cycle 4 cylinder DOHC intercooler attaching supercharger engine, a Regular gasoline engine EN07. This engine EN07 produces a maximum power of 64.8 PS (64 bhp - 47.7 kW) at 6000 rpm and a maximum torque of 89.2 Nm (65.8 lb.ft - 9.1 kg.m) at 3600 rpm. The engine power is transmitted to the road by the four wheel drive (4WD) with a i-CVT gearbox. For stopping power, the Subaru Pleo 660 RM braking system includes Leading trailing drum brake at the rear and Ventilated disk brakes at the front. Stock tire sizes are 155/65 on 13 inch rims at the rear and 155/65 on 13 inch rims at the front. Chassis details - Subaru Pleo 660 RM has dual link strut independent suspension rear suspension and L type lower arm strut independent front suspension for road holding and ride confort.

Add to compare list

- Present
- Option
- Not Present (or Dealer Option)

• Search Car Specs
• Other Pleo Specs Database

By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on April 20, 2024

Introduction to the 1999-2000 Subaru Pleo 660 RM

The 1999-2000 Subaru Pleo 660 RM presents itself as a compact, versatile minivan with a focus on efficient urban mobility. Produced between June 1999 and September 2000, it caters to those seeking a combination of practicality and performance. With its 4WD traction and i-CVT transmission, it offers a smooth and responsive drive.

This 2-row seat minivan boasts dimensions that strike a balance between city maneuverability and interior space. Its compact size, with an exterior length of 339.5 cm, exterior width of 147.5 cm, and exterior height of 162.5 cm, makes it well-suited for urban environments. The interior space offers comfort for up to 4 passengers, with a notable interior length of 168.5 cm, interior width of 122 cm, and interior height of 127 cm.

Under the hood, the Pleo 660 RM houses a 658 cm³ engine with the code EN07, delivering a maximum power of 64.8 PS and a torque of 89.2 Nm. The engine's DOHC intercooler-equipped design ensures a balance of power and efficiency, operating on regular gasoline. It achieves a fuel consumption of approximately 40.5 mpg in 10/15 mode.

The suspension features a dual-link strut independent design for both the front and rear, contributing to a comfortable and stable ride. The Pleo 660 RM rolls on 155/65 R13 tires, ensuring adequate grip and control on various road conditions.

Externally, the vehicle exhibits a standard front spoiler and UV glass protection, along with a roof rail for added utility. The interior comes equipped with standard features such as power windows, power steering, a tachometer, and centralized door locking. Safety is addressed with features like a driver's airbag, side impact bars, and 3-point safety belts.

Overall, the 1999-2000 Subaru Pleo 660 RM emerges as a well-rounded offering in the compact minivan segment, combining practicality, efficient performance, and thoughtful features tailored for urban driving.

Model Years and Generations

The Subaru Pleo 660 RM, produced during the model years 1999 and 2000, represents a distinctive generation of compact minivans. With a production span from June 1999 to September 2000, this generation of Pleo 660 RM offers a snapshot of Subaru's design and engineering approach at the turn of the millennium.

Marking its place in the kei car category, this iteration of the Pleo 660 RM brings together contemporary styling and compact dimensions to cater to urban commuters and small families. As Subaru's engineering and design philosophies evolved, this model showcases the brand's commitment to creating practical, efficient vehicles for urban environments.

During its two-year production run, the Pleo 660 RM offered buyers a range of configurations and features to choose from, contributing to its versatility and broad appeal. With 4WD traction and an i-CVT transmission, this generation sought to strike a balance between performance and fuel efficiency, catering to drivers who valued both power and practicality.

As a part of its generation, the 1999-2000 Subaru Pleo 660 RM reflects the automotive trends and technologies of its era. Its compact stature and functional interior layout align with the preferences of urban drivers, while its engine options and suspension design showcase Subaru's commitment to providing capable and responsive vehicles.

In conclusion, the 1999-2000 Subaru Pleo 660 RM belongs to a specific generation that embodies the brand's approach to compact urban mobility during the late 1990s and early 2000s. Its production span captures a snapshot of Subaru's design and engineering direction at that time, and its features and configurations reflect the needs and preferences of drivers seeking efficient and versatile transportation solutions.

Trim Levels and Configurations

The 1999-2000 Subaru Pleo 660 RM offered a range of trim levels and configurations to cater to diverse preferences and requirements. Buyers during this period had the opportunity to choose from various setups, allowing them to select a version of the Pleo 660 RM that best suited their needs.

Trim levels varied in terms of features, with each level offering a distinct set of equipment to enhance convenience, comfort, and driving experience. Whether prioritizing practicality or aiming for a more premium feel, buyers could find a configuration that aligned with their priorities.

Configurations included options for interior finishes, entertainment systems, and additional comfort amenities. Buyers could choose among different levels of technology integration, such as audio systems and power accessories. This flexibility allowed buyers to customize their Pleo 660 RM experience according to their individual preferences.

Throughout its range of trim levels and configurations, the 1999-2000 Subaru Pleo 660 RM aimed to provide drivers with an array of choices that aligned with their lifestyle and driving needs. This approach underlines the brand's commitment to delivering versatile solutions to a diverse customer base, ensuring that the Pleo 660 RM could accommodate both practical requirements and desired features.

Engine Options and Specifications

The heart of the 1999-2000 Subaru Pleo 660 RM lies within its engine options and specifications, delivering a balance of power and efficiency for urban mobility. Engine choices for this model provided drivers with versatile driving dynamics suited for various scenarios.

The Pleo 660 RM was powered by a 658 cm³ engine with the code EN07, showcasing a four-cylinder DOHC intercooler-attached supercharger design. This configuration emphasized responsive performance while maintaining efficient fuel consumption. The maximum power output of 64.8 PS and torque of 89.2 Nm ensured capable acceleration and maneuverability within city environments.

The regular gasoline fuel type aligned with the vehicle's urban-focused design, providing convenience and accessibility for everyday use. This choice also contributed to the model's balance between performance and economical fuel consumption.

With its engine specifications and technology, the Pleo 660 RM reflected Subaru's commitment to creating vehicles that catered to the demands of city driving, ensuring both power and efficiency in a compact package. This approach to engine design underscored the brand's dedication to offering vehicles that resonate with drivers seeking responsive performance and smart fuel usage.

Dimensions and Sizes

The 1999-2000 Subaru Pleo 660 RM's dimensions and sizes were carefully designed to strike a harmonious balance between maneuverability and interior space, catering to the needs of urban commuters and small families alike.

Externally, the Pleo 660 RM displayed compact proportions that made it well-suited for navigating city streets and tight parking spaces. With an exterior length of 339.5 cm, an exterior width of 147.5 cm, and an exterior height of 162.5 cm, this model maintained a manageable footprint while offering ample headroom for passengers.

Inside the vehicle, interior dimensions ensured a comfortable experience for occupants. The interior length of 168.5 cm, interior width of 122 cm, and interior height of 127 cm contributed to a spacious cabin environment. These measurements allowed for comfortable seating arrangements and efficient utilization of interior space.

The vehicle's wheelbase of 231 cm and minimum turning circle of 4.9 meters further showcased its agility and responsiveness in urban settings. Additionally, the ground clearance of 15 cm struck a balance between efficient road handling and the ability to navigate road irregularities.

In summary, the dimensions and sizes of the 1999-2000 Subaru Pleo 660 RM were thoughtfully engineered to provide drivers with a compact yet comfortable vehicle that excelled in urban mobility. The careful consideration of exterior and interior proportions allowed for an optimal combination of maneuverability and interior space, catering to the practical needs of city dwellers.

Wheel Options and Details

The 1999-2000 Subaru Pleo 660 RM's wheel options and details contribute to its overall performance and handling characteristics, enhancing its capabilities as a compact urban vehicle.

Equipped with 155/65 R13 tires, both front and rear, the Pleo 660 RM ensures a balanced and predictable grip on the road. The tire size strikes a balance between responsive handling and comfortable ride quality, contributing to the vehicle's maneuverability in city environments.

The choice of wheel size complements the Pleo 660 RM's compact dimensions, allowing it to navigate through narrow streets and tight corners with ease. The selected wheel configuration enhances the vehicle's overall agility and responsiveness, key qualities for urban driving scenarios.

By focusing on wheel options and details, Subaru aimed to ensure that the Pleo 660 RM delivers confident handling and stability, attributes that are essential for urban commuting. This approach showcases the brand's commitment to providing drivers with a well-rounded driving experience that aligns with the demands of city living.

Fuel Tank Capacity and Range

The fuel tank capacity and range of the 1999-2000 Subaru Pleo 660 RM play a pivotal role in defining its practicality and convenience as a compact urban vehicle.

With a fuel tank capacity of 8.4 US gallons (approximately 32 liters), the Pleo 660 RM offers a balance between refueling stops and extended driving range. This capacity ensures that drivers can cover a respectable distance before needing to refuel, making it well-suited for daily commuting and city exploration.

The chosen fuel tank capacity aligns with the vehicle's urban-focused design, providing an optimal balance between frequent refueling and a reasonable range. This consideration caters to the needs of urban drivers who prioritize efficiency and convenience in their day-to-day journeys.

By combining an appropriate fuel tank capacity with efficient engine technology, the Pleo 660 RM showcases Subaru's commitment to offering a vehicle that aligns with the demands of urban living. This approach ensures that drivers can confidently navigate the cityscape without the constant need for refueling, enhancing the overall convenience and usability of the vehicle.

Fuel Consumption and MPG

The 1999-2000 Subaru Pleo 660 RM's fuel consumption and MPG (miles per gallon) ratings underline its efficient and economical performance, a key feature for urban-centric driving.

With its 658 cm³ engine and well-engineered systems, the Pleo 660 RM achieves a fuel consumption of approximately 40.5 mpg in the 10/15 mode testing cycle. This measurement represents an impressive balance between power and economy, allowing drivers to make the most of each tank of fuel.

The fuel efficiency of the Pleo 660 RM aligns with its role as a practical urban vehicle, providing drivers with a cost-effective solution for daily commuting and city exploration. The vehicle's technology and engineering contribute to this efficient performance, reflecting Subaru's commitment to developing vehicles that offer both power and sensible fuel usage.

By delivering competitive fuel consumption figures, the Pleo 660 RM showcases its value as a city-friendly vehicle, catering to the needs of drivers who prioritize both performance and economical operation. This focus on fuel efficiency speaks to the brand's dedication to providing vehicles that are in tune with the demands of modern urban lifestyles.

Average Fuel Economy

The 1999-2000 Subaru Pleo 660 RM stands out with its commendable average fuel economy, making it a prudent choice for those who prioritize efficient and cost-effective driving.

Designed to excel in urban environments, the Pleo 660 RM showcases an average fuel economy that aligns with its compact, practical nature. With its 658 cm³ engine and carefully engineered systems, this model achieves an average fuel consumption that speaks to its economical operation.

The focus on delivering an impressive average fuel economy is evident in the Pleo 660 RM's technology and design choices. Its compact size, efficient engine, and thoughtful engineering work together to offer drivers an urban-friendly vehicle that maximizes each gallon of fuel.

By providing a noteworthy average fuel economy, the Pleo 660 RM underscores its suitability for urban commuting and daily driving. This emphasis on efficient performance speaks to Subaru's commitment to delivering vehicles that provide a balance between power and sensible fuel usage, ensuring that drivers can navigate city streets with confidence and economy.

Conclusion

The 1999-2000 Subaru Pleo 660 RM encapsulates a purposeful blend of compact design, efficient performance, and practical features. As a representative of its generation, this model caters to urban dwellers and city explorers with its carefully calibrated dimensions and versatile configurations.

The Pleo 660 RM's 4WD traction and i-CVT transmission deliver responsive handling, while its 658 cm³ engine strikes a harmonious balance between power and efficiency. With its impressive fuel consumption and average fuel economy figures, it provides drivers with an economical option for navigating urban environments.

Inside, the cabin dimensions and seating arrangements offer comfort and utility for up to four passengers. The vehicle's thoughtful wheel options, dimensions, and ground clearance enhance its agility on city streets, while its safety features, including side impact bars and safety belts, contribute to peace of mind.

In conclusion, the 1999-2000 Subaru Pleo 660 RM embodies Subaru's commitment to producing vehicles that cater to the demands of urban life. Its well-rounded attributes, from its efficient engine and fuel economy to its practical dimensions, showcase the brand's dedication to creating vehicles that resonate with drivers seeking efficient and versatile transportation solutions for their city journeys.

FAQ: 1999-2000 Subaru Pleo 660 RM – Your Questions Answered