1999 Subaru Pleo 660 RS Specs


OVERVIEW

With a fuel consumption of 39.2 mpg US - 47 mpg UK - 6.0 L/100km, a weight of 1895 lbs (860 kg), the Subaru Pleo 660 RS has a water cooling 4 cycle 4 cylinder DOHC16 valve intercooler attaching supercharger engine, a High octane premium gasoline engine EN07. This engine EN07 produces a maximum power of 64.8 PS (64 bhp - 47.7 kW) at 6000 rpm and a maximum torque of 99 Nm (73 lb.ft - 10.1 kg.m) at 3200 rpm. The engine power is transmitted to the road by the front wheel drive (FF) with a i-CVT gearbox. For stopping power, the Subaru Pleo 660 RS braking system includes Disk at the rear and Ventilated disk brakes at the front. Stock tire sizes are 155/65 on 13 inch rims at the rear and 155/65 on 13 inch rims at the front. Chassis details - Subaru Pleo 660 RS has dual link strut independent suspension rear suspension and L type lower arm strut independent front suspension for road holding and ride confort.

Add to compare list

GENERAL INFORMATION
Complectation Name660 RS
Period of ProductionJun 1999 - Sep 2000
Drive Wheels - Traction - DrivetrainFF
Body TypeMinivan (2 row seats)
Transmission Gearbox - Number of Speedsi-CVT
Engine Size - Displacement - Engine Capacity658 cm3 or 40.1 cu-in
Frame NameGF-RA1

SUBARU PLEO 660 RS SIZE, DIMENSIONS AND WEIGHT
Exterior Length339.5 cm or 133.66 inches
Exterior Width147.5 cm or 58.07 inches
Exterior Height157.5 cm or 62 inches
Interior Length168.5 cm or 66.33 inches
Interior Width122 cm or 48.03 inches
Interior Height127 cm or 50 inches
Wheelbase231 cm or 90.94 inches
Front Axle Length128.5 cm or 50.59 inches
Rear Axle Length126 cm or 49.6 inches
Ride Height - Ground Clearance15 cm or 5.9 inches
Weight860 kg or 1895 lbs
Num. of Seats4
Num. of Doors5
Minimum Turning Circle - Turning Diameter, m4.9
Fuel Tank Capacity8.4 US gallons
7 UK gallons
32 L

SUBARU PLEO 660 RS ENGINE TECHNICAL DATA
Engine CodeEN07
Maximum Power - Output - Horsepower64.8 PS or 64 bhp or 47.7 kW
Maximum Power RPM6000 rpm
Maximum Torque99 Nm or 73 lb.ft or 10.1 kg.m
Maximum Torque RPM3200 rpm
Engine Type - Number of Cylinderswater cooling 4 cycle 4 cylinder DOHC16 valve intercooler attaching supercharger
Engine Additional InfoCharger
Fuel TypeHigh octane premium gasoline
Fuel Consumption (10/15 mode)39.2 mpg US
47 mpg UK
6.0 L/100km
CVT Ger Ratio2.432
Rear Gear Ratio1.931
Compression Ratio9
Bore5.6 cm or 2.2 inches
Stroke6.7 cm or 2.63 inches

SUBARU PLEO 660 RS SUSPENSION
Front Brakes - Disc DimensionsVentilated disk brakes
Rear Brakes - Disс DimensionsDisk
Front SuspensionL type lower arm strut independent
Rear Suspensiondual link strut independent suspension
Front Tyres - Rims Dimensions155/65 R13
Rear Tyres - Rims Dimensions155/65 R13
Tyres - Rims Dimensions155 / 55 R14
Aluminium DiskOption

SUBARU PLEO 660 RS EXTERIOR
SunroofNo
Tilt SunroofNo
Twin SunroofNo
Front SpoilerStandart
Rear SpoilerStandart
Power Adjustable Door MirrorsStandart
Xenon LampsNo
Front Fog LampsStandart
Rear Fog LampsNo
Cornering LampsNo
Ultraviolet Glass ProtectionStandart
Roof RailNo
Back WiperStandart

SUBARU PLEO 660 RS INTERIOR
Power WindowStandart
Power SteeringStandart
TachometerStandart
Centralized Door LockStandart
Keyless EnterStandart
Right Hand DriveStandart
Left Hand DriveNo
Leather WindingNo
Adjustable SteeringNo
Telescopic SteeringNo
Tilt SteeringNo
Wood PanelNo
Cruise ControlNo
Leather SeatNo
Power Adjustable SeatsNo
Power Ajustable Front SeatNo
Power Ajustable Back SeatNo
Reclining SeatsNo
Removable SeatsStandart
Turning SeatsNo

SUBARU PLEO 660 RS SAFETY
Drivers AirbagStandart
Passengers AirbagNo
Side AirbagNo
Side Impact BarStandart
TCSNo
Break AssistNo
Parking RadarNo
Central Power Window ControlNo
Additional Stop LightNo
Safety Belt PretensionerNo
Safety Belt LimiterStandart
3 Point Safety BeltStandart
Child Car RestraintsStandart
Durable FrameNo

AMENITY
CoolerNo
Automatic Air ConditioningNo
Twin Conditioning SystemNo
Air PurifierNo
RadioNo
Autoreverse CasetteNo
CD PlayerNo
CD ChangerNo
MD PalyerNo
MD ChangerNo

OTHER
LSDNo
Front StabilizerStandart
Rear StablilizerNo
Special EquipmentNo


- Present
- Option
- Not Present (or Dealer Option)




By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on April 19, 2024
πŸ“Œ Introduction to the 1999-2000 Subaru Pleo 660 RS
πŸ“Œ Engine Specifications of the Pleo 660 RS
πŸ“Œ Dimensions and Sizes of the Pleo 660 RS
πŸ“Œ Fuel Tank Capacity: How Much Can It Hold?
πŸ“Œ Fuel Consumption and MPG of the Pleo 660 RS
πŸ“Œ Wheel Specifications for Handling and Performance
πŸ“Œ Trim Levels and Variants Available
πŸ“Œ Generational Changes: What's New in These Years?
πŸ“Œ Fuel Average: What to Expect in Real-World Driving
πŸ“Œ Interior Space and Cargo Capacity
πŸ“Œ Safety Features and Ratings
πŸ“Œ Performance and Handling Characteristics
πŸ“Œ Maintenance and Reliability
πŸ“Œ Fuel Capacity: Understanding Your Range
πŸ“Œ Conclusion: The 1999-2000 Subaru Pleo 660 RS in Review
πŸ“Œ FAQ: Common Questions About the 1999-Subaru Pleo 660 RS

Introduction to the 1999-2000 Subaru Pleo 660 RS

The 1999-2000 Subaru Pleo 660 RS is a remarkable addition to Subaru's lineup during that era. This compact minivan, sporting two rows of seats, was available to the market from June 1999 to September 2000. Known for its front-wheel-drive (FF) drivetrain, it offered an engaging driving experience in a practical package.

Under the hood, the Pleo 660 RS packed a punch with its 658 cm³ engine, boasting water cooling, a 4-cylinder DOHC16 valve intercooler attaching supercharger, and the engine code EN07. This powertrain delivered a maximum output of 64.8 PS (64 bhp) at 6000 rpm and a torque of 99 Nm (73 lb.ft) at 3200 rpm, providing a satisfying balance of performance and efficiency.

When it comes to size and dimensions, the Pleo 660 RS measured 339.5 cm (133.66 inches) in exterior length, 147.5 cm (58.07 inches) in exterior width, and 157.5 cm (62 inches) in exterior height. The wheelbase stretched to 231 cm (90.94 inches), ensuring stability and a comfortable ride. With a compact footprint and a weight of 860 kg (1895 lbs), it was well-suited for city driving.

Inside the Pleo 660 RS, there was ample space with room for four passengers and five doors for easy access. The interior dimensions included a length of 168.5 cm (66.33 inches), a width of 122 cm (48.03 inches), and a height of 127 cm (50 inches). This minivan prioritized functionality while maintaining a compact form factor.

The fuel tank capacity of the Pleo 660 RS was 8.4 US gallons (7 UK gallons or 32 L), ensuring that it could cover reasonable distances between refueling stops. Fuel consumption in the 10/15 mode was impressive, offering an average of 39.2 mpg US (47 mpg UK or 6.0 L/100km), making it a cost-effective choice for daily commutes.

On the exterior, the Pleo 660 RS came with standard front and rear spoilers, enhancing its aerodynamic profile. It featured front fog lamps for improved visibility and ultraviolet glass protection for added comfort. The car rode on 155/65 R13 tires, with an option for aluminum disks.

Inside the cabin, standard features included power windows, power steering, a tachometer, and centralized door locks. Safety was addressed with a driver's airbag, side impact bars, and a safety belt system. It was equipped with child car restraints, ensuring the safety of young passengers.

The 1999-2000 Subaru Pleo 660 RS blended practicality with performance, making it a noteworthy choice in its segment during that period. Its compact size, efficient engine, and well-thought-out features made it a versatile option for various driving needs.

Engine Specifications of the Pleo 660 RS

The heart of the 1999-2000 Subaru Pleo 660 RS is its impressive engine, setting it apart in the compact minivan category. This model is equipped with an EN07 engine, renowned for its performance and efficiency.

The EN07 engine boasts a displacement of 658 cm³, delivering a powerful punch despite its compact size. This engine is part of the water-cooling, 4-cylinder, 4-cycle, DOHC 16-valve family, featuring an intercooler attaching supercharger. This combination of features ensures a balance between power and fuel efficiency.

When it comes to power output, the Pleo 660 RS impresses with a maximum of 64.8 PS (64 bhp) at 6000 rpm, providing ample power for urban and highway driving. The engine's torque performance is equally commendable, with a peak torque of 99 Nm (73 lb.ft) at 3200 rpm, allowing for responsive acceleration and confident overtaking on the road.

This engine runs on high-octane premium gasoline, optimizing performance and efficiency. The fuel consumption figures in the 10/15 mode are notable, offering an average of 39.2 mpg US (47 mpg UK or 6.0 L/100km). This level of fuel efficiency makes the Pleo 660 RS a cost-effective choice for daily commuting and longer journeys.

The CVT (Continuously Variable Transmission) gear ratio for this model is 2.432, enhancing the smoothness of gear changes and optimizing fuel economy. The rear gear ratio is 1.931, further contributing to the car's performance and drivability.

With a compression ratio of 9, the Pleo 660 RS's engine is designed to extract maximum power from each drop of fuel, ensuring an efficient and enjoyable driving experience. The engine's bore measures 5.6 cm (2.2 inches), and the stroke is 6.7 cm (2.63 inches), contributing to the engine's overall characteristics.

In summary, the engine of the 1999-2000 Subaru Pleo 660 RS is a testament to Subaru's commitment to delivering both power and efficiency in a compact package. Its engineering, including the intercooler attaching supercharger, ensures that drivers can enjoy a responsive and enjoyable driving experience while maintaining fuel efficiency, making it a standout choice in its category.

Dimensions and Sizes of the Pleo 660 RS

The dimensions and sizes of the 1999-2000 Subaru Pleo 660 RS contribute to its practicality and maneuverability, making it well-suited for various driving conditions, especially in urban environments.

In terms of exterior measurements, the Pleo 660 RS boasts a compact footprint. Its exterior length is approximately 339.5 cm (133.66 inches), while the width comes in at around 147.5 cm (58.07 inches). The exterior height reaches approximately 157.5 cm (62 inches). These dimensions make it easy to navigate through crowded city streets and fit into parking spaces with ease.

Moving to the interior, the Pleo 660 RS offers a functional and space-efficient cabin. The interior length measures approximately 168.5 cm (66.33 inches), providing ample room for passengers and cargo. The width of the interior is around 122 cm (48.03 inches), ensuring a comfortable seating arrangement for occupants. The interior height reaches approximately 127 cm (50 inches), offering a reasonable amount of headroom.

With a wheelbase of 231 cm (90.94 inches), the Pleo 660 RS strikes a balance between stability and agility, providing a comfortable ride and confident handling on the road. The front axle length is approximately 128.5 cm (50.59 inches), while the rear axle length measures around 126 cm (49.6 inches), contributing to its balanced weight distribution.

The ride height, or ground clearance, of the Pleo 660 RS is approximately 15 cm (5.9 inches). This height is well-suited for urban driving and provides a smooth ride over typical road conditions.

In terms of seating capacity, this model comfortably accommodates up to four passengers, distributed among five doors for easy access. The compact nature of the Pleo 660 RS makes it an ideal choice for small families or individuals looking for a practical and efficient daily driver.

The 1999-2000 Subaru Pleo 660 RS's dimensions and sizes make it a versatile choice for urban commuters and those seeking a compact yet spacious vehicle. Its compact exterior dimensions and well-utilized interior space ensure that it can navigate city streets and parking spaces effortlessly while providing comfort to its occupants.

Fuel Tank Capacity: How Much Can It Hold?

The fuel tank capacity of the 1999-2000 Subaru Pleo 660 RS is an important specification that directly impacts the car's range and convenience for drivers. This compact minivan comes equipped with a fuel tank that can hold up to 8.4 US gallons (7 UK gallons or 32 liters) of gasoline.

This fuel tank capacity is well-suited for the Pleo 660 RS's size and engine, ensuring that drivers can cover a reasonable distance between refueling stops. With its efficient engine and a commendable fuel consumption rate of approximately 39.2 mpg US (47 mpg UK or 6.0 L/100km) in the 10/15 mode, drivers can enjoy extended drives without frequent interruptions for refueling.

The combination of a compact size, fuel-efficient engine, and a sufficiently sized fuel tank makes the Pleo 660 RS a practical choice for daily commuting and longer journeys. It strikes a balance between fuel economy and the convenience of a relatively spacious fuel tank, allowing drivers to focus on the road ahead without constantly worrying about refueling.

Fuel Consumption and MPG of the Pleo 660 RS

The fuel consumption and miles per gallon (MPG) rating of the 1999-2000 Subaru Pleo 660 RS are key factors that influence its cost-effectiveness and suitability for various driving scenarios. This compact minivan delivers impressive fuel efficiency, making it a practical choice for both urban and long-distance driving.

In the 10/15 mode, which is a standardized test cycle used to measure fuel efficiency, the Pleo 660 RS achieves an average fuel consumption rate of approximately 39.2 mpg US (47 mpg UK or 6.0 L/100km). This remarkable efficiency is a result of Subaru's engineering, including the combination of a compact engine, CVT transmission, and other design features aimed at optimizing fuel economy.

This level of fuel efficiency translates to fewer stops at the gas station and lower fuel costs for drivers. It's a significant advantage for daily commuting, where fuel expenses can add up over time. Additionally, it's environmentally friendly, with reduced carbon emissions compared to less efficient vehicles.

The impressive fuel economy of the Pleo 660 RS not only benefits the driver's wallet but also extends the range between refueling stops. This makes it an excellent choice for those who frequently travel longer distances, as it offers the convenience of fewer interruptions during journeys.

In summary, the 1999-2000 Subaru Pleo 660 RS stands out for its excellent fuel consumption and MPG ratings, making it a cost-effective and practical choice for drivers seeking both efficiency and affordability in their daily transportation.

Wheel Specifications for Handling and Performance

The wheel specifications of the 1999-2000 Subaru Pleo 660 RS play a crucial role in defining its handling, performance, and overall driving experience. These specifications are designed to strike a balance between stability, agility, and comfort on the road.

The Pleo 660 RS comes equipped with a set of wheels that complements its compact size and responsive engine. The front and rear tires are sized at 155/65 R13, providing a suitable blend of grip and ride comfort. These tires are designed to maintain good traction on various road surfaces, ensuring stable handling and a confident driving feel.

Additionally, there is an option for aluminum disks, which can enhance not only the visual appeal but also the overall performance of the vehicle. Aluminum wheels are known for their lightweight nature, which can contribute to improved fuel efficiency and handling responsiveness.

The choice of tire size and type, combined with the suspension system, contributes to the Pleo 660 RS's ability to navigate tight city streets and handle well in urban driving conditions. The vehicle's dual-link strut independent suspension in the rear and L-type lower arm strut independent suspension in the front further aid in providing a comfortable and controlled ride.

The wheel specifications of the Pleo 660 RS are well-suited to its compact dimensions, making it an ideal choice for city driving and maneuvering through traffic. These specifications ensure that drivers can enjoy a responsive and predictable handling experience while maintaining ride comfort and stability on the road.

Trim Levels and Variants Available

The 1999-2000 Subaru Pleo 660 RS offered a range of trim levels and variants to cater to the diverse preferences and needs of drivers. These different configurations allowed buyers to choose the one that best suited their requirements and budget.

While specific trim levels and variants may vary depending on the market and region, the Pleo 660 RS typically featured a standard set of features that included power windows, power steering, a tachometer, centralized door locks, and child car restraints for safety. These standard features ensured a basic level of comfort, convenience, and security for all passengers.

The availability of options and additional features may have varied between different variants of the Pleo 660 RS. Some of these options could have included alloy wheels, different exterior paint colors, and interior upholstery choices, allowing buyers to personalize their vehicles to a certain extent.

Overall, the Pleo 660 RS was designed to offer a balance between affordability and functionality, making it an appealing choice for individuals and families seeking a practical and cost-effective transportation solution. The range of trim levels and variants provided options for buyers to select the configuration that best matched their specific requirements and preferences.

Generational Changes: What's New in These Years?

The 1999-2000 Subaru Pleo 660 RS represents a particular period in the Pleo's generational evolution, and during these years, there were notable updates and changes that contributed to its appeal in the market.

One of the significant aspects of this generation was its focus on fuel efficiency and emissions reduction. The Pleo 660 RS featured an efficient 658 cm³ engine with water cooling, a 4-cylinder DOHC16 valve intercooler attaching supercharger, and the engine code EN07. This engine was designed to provide a balance between power and fuel economy, reflecting a growing awareness of environmental concerns and the need for cost-effective transportation.

The introduction of a Continuously Variable Transmission (CVT) gearbox with a CVT gear ratio of 2.432 further enhanced the Pleo 660 RS's fuel efficiency and smooth driving experience. This technology contributed to a more enjoyable and eco-friendly ride, aligning with changing consumer preferences.

In terms of safety, this generation continued to prioritize driver and passenger protection with features like a driver's airbag, side impact bars, and a comprehensive safety belt system. These additions aimed to enhance the safety profile of the Pleo 660 RS, ensuring that occupants were well-protected in the event of a collision.

The Pleo 660 RS's exterior design underwent subtle changes, with standard front and rear spoilers contributing to its aerodynamic profile. These enhancements not only improved the car's appearance but also its overall performance and efficiency.

Overall, the 1999-2000 Subaru Pleo 660 RS represented a shift toward greater fuel efficiency, improved environmental performance, and enhanced safety within the Pleo's generational evolution. These updates and changes made it a practical and attractive choice for drivers seeking a compact and eco-conscious vehicle during that period.

Fuel Average: What to Expect in Real-World Driving

Understanding the real-world fuel average of the 1999-2000 Subaru Pleo 660 RS is crucial for prospective buyers who want to gauge the practicality and cost-effectiveness of this compact minivan in everyday driving conditions.

While official fuel consumption figures are often provided in standardized testing environments, real-world driving can vary based on factors such as driving habits, road conditions, and traffic. That said, the Pleo 660 RS was designed to be an efficient and economical choice for daily commutes and urban driving.

In typical city driving scenarios, where frequent stops and starts are common, drivers could expect to achieve fuel economy figures that align closely with the official ratings. With an average of approximately 39.2 mpg US (47 mpg UK or 6.0 L/100km) in the 10/15 mode, the Pleo 660 RS offered competitive fuel efficiency.

For highway driving or longer journeys, the Pleo 660 RS's efficient engine and aerodynamic design further contributed to maintaining favorable fuel economy. Drivers could anticipate a fuel average that remains efficient, especially when cruising at a consistent speed on highways.

Additionally, responsible driving practices, such as smooth acceleration and deceleration, can help maximize fuel economy in real-world conditions. Regular vehicle maintenance, including keeping the engine properly tuned and ensuring that tires are inflated to the recommended levels, can also play a role in achieving optimal fuel efficiency.

In summary, the 1999-2000 Subaru Pleo 660 RS's real-world fuel average is expected to align closely with its official fuel consumption figures, making it a practical and cost-effective choice for daily commuting and longer journeys. By adopting responsible driving habits and maintaining the vehicle, drivers can further enhance its efficiency and minimize fuel costs.

Interior Space and Cargo Capacity

The interior space and cargo capacity of the 1999-2000 Subaru Pleo 660 RS are important considerations for those seeking a practical and versatile vehicle. This compact minivan offers a well-thought-out interior layout that optimizes space for passengers and cargo.

Starting with the interior dimensions, the Pleo 660 RS provides a comfortable and roomy cabin. The interior length measures approximately 168.5 cm (66.33 inches), offering ample legroom for both front and rear passengers. The width of around 122 cm (48.03 inches) ensures that occupants have sufficient space to sit comfortably without feeling cramped. The interior height of approximately 127 cm (50 inches) contributes to a sense of openness in the cabin.

Despite its compact exterior dimensions, the Pleo 660 RS offers a practical seating arrangement. With room for up to four passengers, distributed across both the front and rear seats, this minivan strikes a balance between passenger comfort and interior space utilization. Additionally, the option for removable seats adds to the versatility of the interior, allowing owners to configure the space to suit their specific needs, whether it's transporting passengers or cargo.

When it comes to cargo capacity, the Pleo 660 RS offers a reasonable amount of space considering its size. While it may not have the cargo-carrying capabilities of larger vehicles, it provides enough room in the rear area to accommodate groceries, luggage, or smaller items. The removable seats also come in handy for expanding the cargo area when needed, making it a flexible choice for various scenarios.

In summary, the 1999-2000 Subaru Pleo 660 RS strikes a balance between interior space for passengers and cargo capacity. Its thoughtful interior design maximizes the available space to ensure passenger comfort, while the option for removable seats adds versatility for different transportation needs.

Safety Features and Ratings

Safety is a paramount consideration when evaluating a vehicle, and the 1999-2000 Subaru Pleo 660 RS comes equipped with a range of safety features to ensure the well-being of its occupants.

One of the fundamental safety features is the driver's airbag, which is standard in this model. The airbag is designed to inflate rapidly in the event of a collision, providing a cushioning effect and reducing the risk of injury to the driver.

In addition to the driver's airbag, the Pleo 660 RS incorporates side impact bars, further enhancing the protection of occupants in the event of a side collision. These bars are designed to absorb and distribute the impact forces, minimizing the risk of injury.

The comprehensive safety belt system in the Pleo 660 RS includes a three-point safety belt, safety belt pretensioners, and a safety belt limiter. These features are vital for restraining occupants and ensuring that they remain securely in their seats during sudden stops or collisions.

Child car restraints are also standard in the Pleo 660 RS, providing a safe and secure way to transport young passengers. These restraints are essential for safeguarding children during journeys.

While specific safety ratings may vary depending on the region and testing organization, the inclusion of these safety features is indicative of Subaru's commitment to occupant safety. They contribute to creating a protective environment within the vehicle, enhancing driver and passenger confidence.

In summary, the 1999-2000 Subaru Pleo 660 RS prioritizes safety with features such as airbags, side impact bars, a comprehensive safety belt system, and child car restraints. These safety measures collectively contribute to creating a secure and protected space for occupants, reflecting the manufacturer's dedication to occupant well-being.

Performance and Handling Characteristics

The 1999-2000 Subaru Pleo 660 RS offers a blend of performance and handling characteristics that make it a notable choice in its category, particularly for urban driving and daily commutes.

One of the standout features of the Pleo 660 RS is its compact size, which contributes to agile and responsive handling. The relatively small exterior dimensions, including its shorter length and narrow width, make it well-suited for maneuvering through city streets and navigating tight parking spaces with ease. This compact form factor enhances its overall handling and maneuverability.

Under the hood, the Pleo 660 RS is powered by a 658 cm³ engine with features like water cooling, a 4-cylinder DOHC16 valve intercooler attaching supercharger, and the engine code EN07. While it may not be a high-performance sports car, this engine delivers sufficient power for urban and highway driving. Its compact size also helps with weight distribution, further improving handling characteristics.

The introduction of a Continuously Variable Transmission (CVT) gearbox with a CVT gear ratio of 2.432 enhances the smoothness of gear changes, contributing to a more comfortable and enjoyable driving experience. CVT technology optimizes power delivery and fuel efficiency, making it well-suited for city driving conditions.

The suspension system of the Pleo 660 RS includes an L-type lower arm strut independent front suspension and a dual-link strut independent rear suspension. These components work together to provide a balance between ride comfort and handling stability, ensuring that the vehicle remains composed on various road surfaces.

In summary, the 1999-2000 Subaru Pleo 660 RS offers a performance and handling package tailored for urban driving. Its compact size, efficient engine, CVT gearbox, and well-tuned suspension system combine to provide a comfortable and responsive driving experience, making it a practical choice for daily commuting and city living.

Maintenance and Reliability

Maintenance and reliability are important factors to consider when assessing the 1999-2000 Subaru Pleo 660 RS as a potential vehicle choice. Subaru has a reputation for producing dependable and durable vehicles, and the Pleo 660 RS is no exception.

Routine maintenance is key to keeping any vehicle, including the Pleo 660 RS, in good working condition. Regular oil changes, scheduled servicing, and inspections should be carried out as recommended by Subaru to ensure the longevity and reliability of the vehicle. Adhering to the manufacturer's maintenance schedule helps identify and address potential issues before they become major problems, minimizing the risk of breakdowns.

One of the notable advantages of the Pleo 660 RS is its compact and efficient engine. The EN07 engine, with its water cooling, 4-cylinder DOHC16 valve intercooler attaching supercharger, is designed for reliability and longevity. When properly maintained, this engine is known to deliver consistent performance over the years.

Subaru's commitment to safety extends to the reliability of its vehicles. The inclusion of safety features such as side impact bars, a comprehensive safety belt system, and child car restraints reflects the manufacturer's dedication to occupant protection.

In terms of overall reliability, the Pleo 660 RS benefits from Subaru's engineering expertise and quality control standards. Subaru has a track record of producing vehicles that are known for their durability and ability to withstand various driving conditions.

However, it's important to note that the actual reliability of any vehicle can also depend on factors such as how well it's maintained, driving habits, and environmental conditions. Owners who prioritize regular maintenance and responsible driving can expect the Pleo 660 RS to provide reliable transportation for years to come.

In summary, the 1999-2000 Subaru Pleo 660 RS is designed with maintenance and reliability in mind. Routine maintenance, a well-engineered engine, and Subaru's commitment to safety contribute to its reputation as a dependable and durable vehicle, provided it is cared for appropriately by its owner.

Fuel Capacity: Understanding Your Range

Understanding the fuel capacity of the 1999-2000 Subaru Pleo 660 RS is essential for drivers who want to gauge their range and plan their journeys effectively. The fuel tank's capacity plays a significant role in determining how far you can travel on a single tank of gasoline.

The Pleo 660 RS comes equipped with a fuel tank that can hold approximately 8.4 US gallons (7 UK gallons or 32 liters) of gasoline. This capacity, while not exceptionally large, is well-suited for the vehicle's compact size and efficient engine. It strikes a balance between fuel efficiency and the convenience of a sufficiently sized fuel tank.

The advantage of this fuel tank capacity is that it allows drivers to cover a reasonable distance between refueling stops. The Pleo 660 RS's impressive fuel economy, with an average consumption of approximately 39.2 mpg US (47 mpg UK or 6.0 L/100km) in the 10/15 mode, means that you can enjoy extended drives without frequent interruptions for refueling.

Calculating your potential range is a straightforward process. By multiplying the fuel tank capacity by the vehicle's fuel efficiency, you can estimate the distance you can travel on a full tank of gasoline. For example, with an 8.4 US gallon tank and an average consumption of 39.2 mpg, you can expect a range of approximately 329.28 miles (529.93 kilometers) before needing to refuel.

It's worth noting that real-world driving conditions, including factors like traffic, terrain, and driving habits, can affect your actual fuel consumption and, consequently, your range. However, the Pleo 660 RS's fuel tank capacity provides a practical balance between the need for efficiency and the convenience of a reasonably sized fuel tank, allowing for dependable and cost-effective driving.

Conclusion: The 1999-2000 Subaru Pleo 660 RS in Review

The 1999-2000 Subaru Pleo 660 RS is a notable representative of its time, offering a blend of features and characteristics that catered to the needs of urban drivers and those seeking an efficient and practical mode of transportation.

One of its defining attributes was its compact size, which made it exceptionally maneuverable in city traffic and parking. This compactness, combined with a responsive engine and CVT transmission, contributed to a pleasant driving experience, especially in urban environments. The Pleo 660 RS excelled at navigating tight spaces and offered a comfortable ride for both the driver and passengers.

Fuel efficiency was a key highlight, with the Pleo 660 RS achieving commendable mileage. Its efficient engine and aerodynamic design helped reduce fuel consumption, allowing drivers to cover significant distances on a single tank of gasoline. This made it a cost-effective choice for daily commuting and longer journeys.

Safety features, including airbags and side impact bars, demonstrated Subaru's commitment to occupant protection. These elements added a layer of security for both the driver and passengers, contributing to peace of mind on the road.

Interior space, while compact, was well-utilized, and the option for removable seats enhanced its versatility. This flexibility allowed owners to adapt the interior to various needs, whether it was transporting passengers or cargo.

Reliability and maintenance were also in focus, with Subaru's reputation for durability evident in the Pleo 660 RS. Routine maintenance and responsible ownership practices were essential for ensuring its longevity and dependable performance.

In conclusion, the 1999-2000 Subaru Pleo 660 RS was a practical and efficient choice for drivers seeking a compact minivan for urban living. Its compact size, fuel efficiency, safety features, and versatility made it a well-rounded option for a range of transportation needs. While it may not have been a high-performance vehicle, it excelled in its role as a reliable and economical mode of transportation.

FAQ: Common Questions About the 1999-2000 Subaru Pleo 660 RS

What are the key differences between the 1999 and 2000 Subaru Pleo 660 RS models?

The primary difference between the 1999 and 2000 models is the production year. However, there were no significant changes in terms of specifications or features between these two model years. Both offer the same engine options, safety features, and dimensions.

Can you explain the different generations of the Subaru Pleo 660 RS?

The Subaru Pleo 660 RS belongs to the first generation of Pleo models, which was produced from June 1999 to September 2000. It was part of the Pleo lineup, which continued to evolve in subsequent generations with various updates and improvements.

What engine options were available for the 1999-2000 Subaru Pleo 660 RS?

The 1999-2000 Subaru Pleo 660 RS was equipped with a 658 cm³ engine, known as the EN07 engine. It featured water cooling, a 4-cylinder DOHC16 valve intercooler attaching supercharger, and ran on high octane premium gasoline.

Were there any special complectations or trim levels for the Pleo 660 RS during these years?

The Pleo 660 RS was available as a single trim level during the 1999-2000 production period. While there were options for features like aluminum wheels, the core specifications and engine remained consistent across this model.

What is the fuel consumption of the Subaru Pleo 660 RS?

The Subaru Pleo 660 RS boasted impressive fuel efficiency. It achieved an average fuel consumption of approximately 39.2 mpg US (47 mpg UK or 6.0 L/100km) in the 10/15 mode, making it a cost-effective choice for daily commuting and long-distance driving.

How many seats does the 1999-2000 Pleo 660 RS have?

The 1999-2000 Subaru Pleo 660 RS had seating capacity for up to four passengers. It featured a practical layout with both front and rear seats, providing adequate space for a small group of occupants.

What safety features were included in the Pleo 660 RS during these years?

The Pleo 660 RS was equipped with safety features such as a driver's airbag, side impact bars, a comprehensive safety belt system, and child car restraints. These features aimed to enhance occupant protection in the event of an accident.

How does the Pleo 660 RS handle in city driving conditions?

Thanks to its compact size, efficient engine, and responsive handling, the Pleo 660 RS excelled in city driving conditions. It was easy to maneuver in traffic, navigate tight spaces, and find parking, making it a practical choice for urban living.

Can you explain the maintenance requirements for the Pleo 660 RS?

Routine maintenance, including regular oil changes, scheduled servicing, and inspections, is essential to keep the Pleo 660 RS in good working condition. Adhering to Subaru's maintenance schedule helps identify and address potential issues, ensuring reliability and longevity.

What is the fuel tank capacity of the Pleo 660 RS, and how does it affect range?

The Pleo 660 RS had a fuel tank capacity of approximately 8.4 US gallons (7 UK gallons or 32 liters). With its impressive fuel efficiency, it offered a reasonable range on a single tank of gasoline, allowing for extended drives without frequent refueling stops.


Brian Wong - Senior Reviews Editor of cars-directory.net

Brian Wong / Author

Brian Wong is an accomplished automotive journalist and editor with a passion for cars. With over a decade of experience in the industry, he has established himself as a trusted voice in the automotive community. Brian has written extensively about a wide range of topics in the field, from the latest trends in car design to innovative safety features and emerging technologies. As a senior reviews editor, he is responsible for test driving and analyzing the latest cars on the market, providing readers with accurate and objective reviews. His articles are widely read and respected for their depth of knowledge and analysis. Brian is committed to staying at the forefront of the latest developments in the automotive industry, and is dedicated to sharing his expertise and insights with his readers.

Add Comment

 * - The field should be filled
* Your Name:
 Contact (e-mail, phone...):
* Comments:
Photos: