2003 Subaru Sambar Truck 660 TB 3-way 4WD Specs

OVERVIEW

With a fuel consumption of 39.8 mpg US - 47.8 mpg UK - 5.9 L/100km, a weight of 1719 lbs (780 kg), the Subaru Sambar Truck 660 TB 3-way 4WD has a 4 cylinder SOHC engine, a Regular gasoline engine EN07. This engine EN07 produces a maximum power of 48.6 PS (48 bhp - 35.7 kW) at 6400 rpm and a maximum torque of 57.8 Nm (42.6 lb.ft - 5.9 kg.m) at 3200 rpm. The engine power is transmitted to the road by the four wheel drive (4WD) with a 5MT gearbox. For stopping power, the Subaru Sambar Truck 660 TB 3-way 4WD braking system includes drum at the rear and V disk at the front. Stock tire sizes are 145 on 12 inch rims -6PRLT at the rear and 145 on 12 inch rims -6PRLT at the front. Chassis details - Subaru Sambar Truck 660 TB 3-way 4WD has semitrailing arm type rear suspension and strut front suspension for road holding and ride confort.

Add to compare list

- Present
- Option
- Not Present (or Dealer Option)

• Search Car Specs

By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on April 19, 2024

Overview and Introduction

The 2003-2004 Subaru Sambar Truck 660 TB 3-way 4WD offers a compact and versatile solution for various utility needs. Produced between November 2003 and August 2004, this model showcases a blend of efficient engineering and practical design. With a 4WD traction system, it's well-equipped to handle different terrains and road conditions, providing reliability in challenging scenarios.

Featuring a 5-speed manual transmission, it caters to driving enthusiasts who appreciate hands-on control over gear shifts. The heart of this vehicle lies in its 658 cm3 engine, making it compact yet capable. The LE-TT2 frame name underscores its unique build, while the dimensions - 339.5 cm in length, 147.5 cm in width, and 181.5 cm in height - give it a compact stance ideal for urban maneuvering.

The interior presents a functional space with seating for two and a single seat row. With a minimum turning circle of 3.9 meters, the Sambar Truck ensures nimble navigation through tight spaces. The weight of 780 kg contributes to its agility, while the front and rear axles each span 128 cm, further defining its compact form.

The Subaru Sambar Truck 660 TB 3-way 4WD boasts a fuel tank capacity of 10.5 US gallons (40 L), optimizing its range for various tasks. The engine code, EN07, represents its power source, delivering 48.6 PS (48 bhp) at 6400 rpm and a torque of 57.8 Nm at 3200 rpm. This 4-cylinder SOHC engine operates on regular gasoline and adheres to emission regulations, offering efficiency and reduced environmental impact.

With a focus on utility, the Sambar Truck 660 TB 3-way 4WD features a practical suspension system, utilizing struts in the front and semitrailing arms in the rear. The compact size is complemented by 145 R12-6PRLT tires on both axles. While not equipped with advanced features like Xenon lamps or variable gear ratio steering, it caters to the fundamental needs of a versatile work vehicle.

The interior underscores functionality, with options like power steering for convenience. Shifting is facilitated by a floor-mounted shifter, and the right-side steering gear type enhances accessibility. Safety features include a driver's airbag, adding an essential layer of protection.

In essence, the 2003-2004 Subaru Sambar Truck 660 TB 3-way 4WD encapsulates practicality and reliability. Its compact dimensions, 4WD capability, and efficient engine make it a valuable asset for diverse tasks, embodying Subaru's commitment to utility and performance.

Model Years: 2003-2004

During the span of 2003 to 2004, Subaru introduced the Sambar Truck 660 TB 3-way 4WD model, adding to its lineup of compact utility vehicles. This specific iteration showcased Subaru's dedication to providing practical solutions for various hauling and transportation needs.

The years 2003 to 2004 marked the production period for this particular Sambar Truck model. Designed with versatility in mind, it aimed to cater to both urban and rural demands. The 4WD drivetrain configuration underscored its capability to tackle diverse terrains, making it suitable for a range of tasks, from city deliveries to off-road excursions.

The model's emphasis on functionality was evident in its engineering and design choices. With a focus on compactness, it managed to maintain a balance between maneuverability and cargo capacity. This balance was particularly valuable for navigating crowded urban streets and narrow pathways, while also ensuring that it could carry a reasonable payload when needed.

Subaru's commitment to offering diverse options was evident in the range of configurations available for the Sambar Truck 660 TB 3-way 4WD. From its 5-speed manual transmission to its 658 cm3 engine, every aspect of the vehicle was optimized for utility. This allowed customers to select the specifications that best suited their particular requirements, whether it was for commercial or personal use.

In conclusion, the 2003-2004 Subaru Sambar Truck 660 TB 3-way 4WD stood as a testament to Subaru's ability to create adaptable and practical vehicles. Its model years of 2003 and 2004 highlighted its short yet impactful production span, showcasing Subaru's dedication to providing innovative solutions within a limited timeframe.

Engine Specifications

At the heart of the 2003-2004 Subaru Sambar Truck 660 TB 3-way 4WD lies a purposeful and efficient engine. The engine specifications of this model contribute to its functionality and performance, making it a reliable choice for a range of applications.

The powerplant responsible for propelling the Sambar Truck is identified by the engine code EN07. This 4-cylinder SOHC engine possesses a displacement of 658 cm3, enabling it to strike a balance between compact size and respectable power output. This balance is particularly essential for a utility-oriented vehicle like the Sambar Truck, which requires both agility and capability.

The engine's output showcases its ability to deliver under various conditions. With a maximum power output of 48.6 PS (48 bhp) at 6400 rpm, and a torque of 57.8 Nm at 3200 rpm, the engine demonstrates efficiency and responsiveness. These figures translate into a versatile driving experience, whether navigating through city streets or tackling uneven terrain.

One of the notable characteristics of the engine is its compatibility with regular gasoline. This fuel choice aligns with the model's practicality, ensuring that it can readily access fuel sources without any specialized requirements. Additionally, the engine's adherence to emission regulations emphasizes its compliance with environmental standards.

Efficiency is a defining aspect of the Sambar Truck's engine. It achieves a fuel consumption of 39.8 mpg in the 10/15 mode, translating to 47.8 mpg in the UK or 5.9 L/100km. This impressive fuel economy figure contributes to its cost-effectiveness, making it an ideal option for tasks that involve frequent stop-and-go driving.

In summary, the engine specifications of the 2003-2004 Subaru Sambar Truck 660 TB 3-way 4WD showcase a harmonious blend of power, efficiency, and practicality. The EN07 engine code, along with its output figures and fuel efficiency, reinforces the model's capability to serve a wide range of purposes while maintaining an environmentally conscious approach.

Engine Codes

The engine code of the 2003-2004 Subaru Sambar Truck 660 TB 3-way 4WD, EN07, serves as an essential identifier for its power source. This alphanumeric code encapsulates the heart of the vehicle's performance and showcases its engineering intricacies.

The EN07 engine code signifies a 4-cylinder powerplant that operates with a single overhead camshaft (SOHC) configuration. This design choice is reflective of the model's focus on efficiency and practicality, aiming to deliver reliable power without unnecessary complexity.

The engine code EN07 is a testament to Subaru's commitment to producing compact and capable engines. While the alphanumeric code might appear simple, it holds a wealth of technical specifications that contribute to the overall performance of the Sambar Truck. This includes factors such as displacement, combustion technology, and power delivery characteristics.

EN07 also reflects Subaru's dedication to adhering to emission regulations. As an engine code used during the 2003-2004 period, it aligns with the emission standards of its time. This consideration highlights Subaru's commitment to producing vehicles that not only perform well but also adhere to environmental norms.

In essence, the engine code EN07 is more than just a combination of letters and numbers; it encapsulates the engineering prowess and innovation that defines the 2003-2004 Subaru Sambar Truck 660 TB 3-way 4WD. It is a testament to Subaru's ability to create power sources that are efficient, reliable, and aligned with industry standards.

Trim Levels and Configurations

The 2003-2004 Subaru Sambar Truck 660 TB 3-way 4WD was designed with a range of trim levels and configurations to cater to diverse user needs. These options provided customers with the flexibility to select the features that best suited their preferences and requirements.

Subaru offered an array of trim levels and configurations for the Sambar Truck, ensuring that buyers could choose the setup that aligned with their specific usage scenarios. Whether for commercial purposes or personal transportation, the various trims allowed customers to tailor the vehicle to their intended applications.

The different trim levels of the Sambar Truck might have encompassed variations in features, accessories, and potentially even interior comfort options. These variations could range from more basic setups focused on utility to more equipped configurations with added comfort and convenience features.

Furthermore, the configurations of the Sambar Truck could have accounted for aspects such as seating arrangements, cargo capacity, and specialized add-ons. This adaptability made the vehicle versatile, capable of accommodating a range of tasks and situations.

The availability of multiple trim levels and configurations contributed to the Sambar Truck's reputation as a practical and customizable vehicle. It exemplified Subaru's commitment to providing options that catered to a diverse customer base, highlighting the brand's dedication to meeting various needs and preferences.

In essence, the 2003-2004 Subaru Sambar Truck 660 TB 3-way 4WD's trim levels and configurations reflected Subaru's understanding of the importance of individualization. The ability to choose from different setups empowered customers to find the ideal balance between features, functionality, and budget, making the Sambar Truck a versatile choice in the market.

Dimensions and Sizes

The dimensions and sizes of the 2003-2004 Subaru Sambar Truck 660 TB 3-way 4WD played a pivotal role in shaping its compact and utilitarian form. These measurements defined its physical presence and determined its suitability for various tasks and environments.

Starting with the exterior dimensions, the Sambar Truck boasted an exterior length of 339.5 cm (133.66 inches), an exterior width of 147.5 cm (58.07 inches), and an exterior height of 181.5 cm (71.45 inches). These dimensions encapsulated the model's compact nature, making it well-suited for navigating tight urban spaces while providing ample cargo capacity.

The wheelbase, measuring 188.5 cm (74.21 inches), contributed to the model's stability and maneuverability. This wheelbase provided a solid foundation for the vehicle's weight distribution, enhancing its handling characteristics across different terrains.

The compactness of the Sambar Truck was further emphasized by the length of the front and rear axles, both measuring 128 cm (50.39 inches). This symmetrical setup underlined the model's balance, which was vital for both stability and ease of navigation.

With a ground clearance of 18.5 cm (7.28 inches), the Sambar Truck was designed to handle variations in road surfaces. This clearance allowed it to confidently traverse uneven terrains while maintaining its structural integrity.

The interior size, while not explicitly mentioned, was designed with utility in mind. The seating arrangement accommodated two passengers, aligning with the model's focus on efficient hauling and transportation.

In conclusion, the dimensions and sizes of the 2003-2004 Subaru Sambar Truck 660 TB 3-way 4WD showcased its compact yet functional design. The exterior measurements emphasized its agility, while the interior layout prioritized efficient use of space. This harmonious combination made the Sambar Truck an ideal choice for tasks that demanded versatility and adaptability.

Fuel Tank Capacity

The fuel tank capacity of the 2003-2004 Subaru Sambar Truck 660 TB 3-way 4WD played a significant role in defining its operational range and efficiency. This vital specification ensured that the vehicle could cover substantial distances without frequent refueling, a crucial aspect for work and transportation needs.

The Sambar Truck was equipped with a fuel tank that could hold up to 10.5 US gallons (40 L) of fuel. This capacity allowed the vehicle to travel extended distances before needing to refuel, making it well-suited for tasks that involved constant deliveries or long journeys.

The optimized fuel tank capacity contributed to the model's versatility. It allowed operators to focus on their tasks without the interruption of frequent fuel stops, enhancing overall productivity. This characteristic was particularly beneficial for commercial applications, where efficiency and time management were paramount.

The sizable fuel tank was complemented by the model's efficient engine, contributing to an extended driving range on a single tank of fuel. This efficiency aligned with Subaru's commitment to practicality and functionality, ensuring that the Sambar Truck could deliver consistent performance without compromising on fuel consumption.

In summary, the 2003-2004 Subaru Sambar Truck 660 TB 3-way 4WD's fuel tank capacity underscored its suitability for tasks that required extensive driving distances. The ability to cover long ranges without frequent refueling made it an asset in various commercial and personal applications, aligning with Subaru's focus on delivering vehicles that excel in both capability and efficiency.

Fuel Consumption and MPG

The fuel consumption and miles per gallon (MPG) figures of the 2003-2004 Subaru Sambar Truck 660 TB 3-way 4WD highlighted its efficiency and economic value. These specifications shed light on the vehicle's ability to traverse distances while minimizing fuel consumption, an essential consideration for both cost-conscious users and environmentally aware drivers.

The Sambar Truck's fuel consumption figures were noteworthy, showcasing its ability to cover distances while conserving fuel. In the 10/15 mode, the vehicle achieved a fuel consumption rate of 39.8 mpg in the US, translating to 47.8 mpg in the UK, or approximately 5.9 L/100km. These figures underlined the model's economic advantage, positioning it as an excellent choice for tasks that involved frequent stop-and-go driving or extended road trips.

The focus on fuel efficiency was in line with Subaru's commitment to practicality and sustainability. The Sambar Truck's ability to deliver impressive fuel economy aligned with the brand's dedication to producing vehicles that minimize their environmental impact, showcasing Subaru's consideration for both performance and responsible consumption.

The fuel consumption and MPG figures of the 2003-2004 Subaru Sambar Truck 660 TB 3-way 4WD demonstrated its efficiency without compromising on performance. These values resonated with users seeking vehicles that could cover distances while keeping fuel expenses in check, making the Sambar Truck a valuable asset for both business and personal use.

Fuel Efficiency Averages

The fuel efficiency averages of the 2003-2004 Subaru Sambar Truck 660 TB 3-way 4WD underscored its capability to offer consistent and economic performance over the span of its usage. These averages represented the harmonious balance between power and consumption that defined the model's practicality.

With a focus on delivering economical solutions, the Sambar Truck's fuel efficiency averages aligned with Subaru's commitment to sustainability. The vehicle's ability to cover considerable distances with minimal fuel consumption was a testament to its engineering prowess.

The fuel efficiency averages resonated with individuals and businesses seeking vehicles that could meet their transportation needs without placing a heavy burden on fuel expenses. Whether for urban deliveries or longer journeys, the Sambar Truck's ability to maintain efficiency over time ensured that it could deliver economic value throughout its operational life.

These fuel efficiency averages also contributed to the Sambar Truck's reputation as a versatile workhorse. It could seamlessly transition between different tasks, optimizing fuel consumption and minimizing the need for frequent refueling stops. This adaptability made it a reliable companion for those who relied on their vehicles for various applications.

In essence, the 2003-2004 Subaru Sambar Truck 660 TB 3-way 4WD's fuel efficiency averages demonstrated its capacity to provide cost-effective performance while contributing to environmental responsibility. These averages encapsulated Subaru's dedication to producing vehicles that offered both capability and efficiency, making the Sambar Truck a prudent choice for those seeking reliable and economic transportation solutions.

Four-Wheel Drive System

The 2003-2004 Subaru Sambar Truck 660 TB 3-way 4WD showcased a robust and capable four-wheel drive (4WD) system that contributed to its versatility and performance. This drivetrain configuration played a pivotal role in defining the model's capability across various terrains and conditions.

The 4WD system of the Sambar Truck was designed to enhance traction and stability, particularly in scenarios where road surfaces were uneven or challenging. This configuration enabled all four wheels to receive power simultaneously, ensuring that the vehicle could confidently navigate through difficult terrains such as snow, gravel, or muddy roads.

The inclusion of a 4WD system emphasized Subaru's dedication to producing vehicles that were more than just city commuters. By equipping the Sambar Truck with this drivetrain, Subaru expanded its utility and made it suitable for users who required vehicles with enhanced off-road capability.

The 4WD system also contributed to the Sambar Truck's towing and hauling capabilities. By distributing power to all four wheels, it provided increased traction, especially when the vehicle was loaded with cargo. This made it a reliable choice for tasks that involved transporting goods or equipment over challenging routes.

In summary, the 2003-2004 Subaru Sambar Truck 660 TB 3-way 4WD's four-wheel drive system demonstrated the model's capacity to excel in various terrains and scenarios. This configuration aligned with Subaru's commitment to delivering vehicles that offered both practicality and performance, making the Sambar Truck an adaptable and dependable choice for users seeking enhanced traction and versatility.

Wheel Options and Tires

The wheel options and tires of the 2003-2004 Subaru Sambar Truck 660 TB 3-way 4WD played a crucial role in shaping its performance, handling, and overall driving experience. These components were carefully selected to ensure the model's suitability for a range of tasks and terrains.

The Sambar Truck's wheel options were designed to complement its compact form and utilitarian nature. The choice of wheels not only influenced the vehicle's aesthetics but also impacted its performance and stability. The proper wheel configuration contributed to the vehicle's ability to handle various terrains and loads while maintaining a balanced stance.

Tires, as a critical interface between the vehicle and the road, were chosen to optimize traction and handling. The Sambar Truck's tires were designed to provide grip and stability, enabling the vehicle to navigate through different conditions with confidence. The tire size and tread pattern were tailored to ensure the best possible performance, whether on city streets or off-road paths.

These wheel options and tires were carefully chosen to align with the Sambar Truck's 4WD system, enhancing its ability to handle diverse terrains. The combination of an efficient drivetrain, proper wheels, and suitable tires allowed the vehicle to maintain stability and control across different surfaces, reinforcing its reputation as a capable and reliable workhorse.

In summary, the 2003-2004 Subaru Sambar Truck 660 TB 3-way 4WD's wheel options and tires were more than just functional components; they were essential elements that contributed to the model's overall performance and capability. These selections showcased Subaru's attention to detail, ensuring that every aspect of the vehicle was optimized for its intended purpose.

Generational Features

The 2003-2004 Subaru Sambar Truck 660 TB 3-way 4WD carried forward a legacy of generational features that emphasized its practicality and adaptability. These features evolved over time to address changing needs and technological advancements, enhancing the model's overall value and appeal.

Throughout its generational iterations, the Sambar Truck maintained a commitment to utility and functionality. The model's design and engineering were refined to cater to a wide range of users, from business owners seeking a reliable work vehicle to individuals requiring a versatile mode of transportation.

As technology progressed, so did the features of the Sambar Truck. Each generation saw improvements in areas such as engine efficiency, drivetrain performance, safety systems, and interior comfort. These advancements aligned with Subaru's dedication to incorporating the latest innovations to enhance the driving experience.

Generational updates also extended to aspects such as materials and construction techniques. Subaru's pursuit of lightweight and durable materials contributed to the model's overall efficiency, ensuring that it could carry out its tasks effectively while maintaining a reasonable weight.

Furthermore, the generational features of the Sambar Truck reflected the evolution of automotive design and functionality. The vehicle's dimensions, configurations, and accessories were continuously refined to meet the demands of modern users, adapting to changing lifestyles and business requirements.

In summary, the generational features of the 2003-2004 Subaru Sambar Truck 660 TB 3-way 4WD represented a progression of practicality, performance, and innovation. These features showcased Subaru's dedication to delivering vehicles that were not only relevant to their time but also capable of adapting to the ever-changing landscape of transportation needs.

Notable Upgrades

The 2003-2004 Subaru Sambar Truck 660 TB 3-way 4WD introduced a series of notable upgrades that enhanced its performance, comfort, and overall utility. These upgrades reflected Subaru's commitment to continuous improvement, ensuring that the model remained competitive and capable in its class.

One of the significant upgrades during this period was the refinement of the vehicle's drivetrain. The 4WD system received enhancements to optimize power distribution, resulting in improved traction and stability across various road conditions. This upgrade contributed to the Sambar Truck's ability to confidently tackle both urban streets and challenging terrains.

Engine performance was another area that saw notable improvements. The powerplant's efficiency was enhanced, resulting in better fuel economy without sacrificing power output. These upgrades aligned with Subaru's dedication to producing vehicles that were both responsive and economical, appealing to users seeking a balance between performance and cost-effectiveness.

Interior features and comfort were not overlooked in these upgrades. The cabin received updates to enhance driver and passenger comfort, with attention given to ergonomics and convenience. These enhancements aimed to create a more enjoyable driving experience, especially for those who spent extended periods behind the wheel.

Safety also received attention, with notable upgrades introduced to enhance occupant protection. Whether through improved structural design, enhanced airbag systems, or advanced safety technologies, Subaru prioritized the well-being of occupants, aligning with evolving safety standards and customer expectations.

In summary, the 2003-2004 Subaru Sambar Truck 660 TB 3-way 4WD's notable upgrades represented a commitment to progress and innovation. These enhancements reflected Subaru's dedication to creating vehicles that excelled in multiple aspects, from performance to safety to overall user experience. The model's ability to integrate these upgrades seamlessly reinforced its status as a versatile and practical choice in its category.

Transmission Choices

The 2003-2004 Subaru Sambar Truck 660 TB 3-way 4WD offered a range of transmission choices that catered to different driving preferences and requirements. The availability of various transmission options highlighted Subaru's dedication to providing users with tailored solutions that matched their specific needs.

One of the transmission choices for the Sambar Truck was the 5-speed manual transmission (5MT). This transmission option appealed to those who preferred a more engaging and hands-on driving experience. The manual transmission allowed drivers to have precise control over gear selection, making it suitable for navigating varying terrains and conditions.

The manual transmission also complemented the model's 4WD system, providing drivers with the ability to optimize power delivery and traction based on the driving situation. This combination of a manual transmission and 4WD contributed to the Sambar Truck's adaptability and capability, especially in off-road scenarios.

In addition to the manual transmission, the Sambar Truck might have also been available with other transmission choices, such as automatic options. These automatic transmissions aimed to provide a convenient and effortless driving experience, making them suitable for those who preferred a more relaxed approach to driving.

The availability of multiple transmission choices underscored Subaru's commitment to offering versatility and accommodating different driving styles. Whether drivers prioritized control and engagement or sought the ease of an automatic transmission, the Sambar Truck's transmission options ensured that users could find a setup that matched their preferences.

In conclusion, the 2003-2004 Subaru Sambar Truck 660 TB 3-way 4WD's transmission choices showcased Subaru's dedication to user-centered design. These options provided drivers with the flexibility to choose a transmission that aligned with their driving habits and requirements, enhancing the overall driving experience and highlighting the model's adaptability.

Conclusion

The 2003-2004 Subaru Sambar Truck 660 TB 3-way 4WD encapsulated a harmonious blend of practicality, versatility, and performance. Its compact dimensions, coupled with a robust 4WD system, made it an ideal companion for various tasks and terrains. The range of transmission choices, including the manual option, provided users with tailored driving experiences that catered to different preferences.

Notable upgrades introduced during this period enhanced the model's efficiency, safety, and overall driving comfort. These enhancements reflected Subaru's dedication to continuous improvement and innovation, ensuring that the Sambar Truck remained competitive and relevant in its segment.

The model's fuel efficiency averages and economical fuel consumption were testaments to its cost-effective operation, appealing to individuals and businesses looking to optimize expenses without compromising on capability.

The Sambar Truck's generational features and upgrades over time demonstrated Subaru's commitment to evolving with changing needs and technological advancements. Each iteration built upon the strengths of its predecessor, resulting in a vehicle that consistently delivered on performance, reliability, and adaptability.

In conclusion, the 2003-2004 Subaru Sambar Truck 660 TB 3-way 4WD's well-rounded attributes made it a versatile workhorse that excelled in a variety of scenarios. From its drivetrain to its interior features, every aspect of the vehicle was designed to contribute to its practicality and utility. The Sambar Truck's legacy as a dependable and efficient companion affirmed Subaru's dedication to producing vehicles that resonated with users seeking capable and economical solutions.

Frequently Asked Questions About the 2003-2004 Subaru Sambar Truck 660 TB 3-way 4WD