2005 Subaru Sambar Truck 660 TB 3-way Specs

OVERVIEW

With a fuel consumption of 40.5 mpg US - 48.7 mpg UK - 5.8 L/100km, a weight of 1609 lbs (730 kg), the Subaru Sambar Truck 660 TB 3-way has a 4 cylinder SOHC engine, a Regular gasoline engine EN07. This engine EN07 produces a maximum power of 48.6 PS (48 bhp - 35.7 kW) at 6400 rpm and a maximum torque of 57.8 Nm (42.6 lb.ft - 5.9 kg.m) at 3200 rpm. The engine power is transmitted to the road by the rear wheel drive (RR) with a 5MT gearbox. For stopping power, the Subaru Sambar Truck 660 TB 3-way braking system includes drum at the rear and V disk at the front. Stock tire sizes are 145 on 12 inch rims -6PRLT at the rear and 145 on 12 inch rims -6PRLT at the front. Chassis details - Subaru Sambar Truck 660 TB 3-way has semitrailing arm type rear suspension and strut front suspension for road holding and ride confort.

Add to compare list

- Present
- Option
- Not Present (or Dealer Option)

• Search Car Specs

By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on April 16, 2024

Introduction

The 2005-2008 Subaru Sambar Truck 660 TB 3-way was a compact utility vehicle that brought versatility to urban transportation. This iteration of the Sambar Truck, produced from November 2005 to June 2008, demonstrated its prowess with a rear-wheel-drive (RR) configuration, empowering it for various road conditions. The vehicle's 5-speed manual transmission facilitated smooth gear changes, making it suitable for maneuvering within tight city spaces.

At its heart, the Sambar Truck 660 TB 3-way housed the robust 658 cm³ engine, known by the code "EN07". This engine generated a maximum power output of 48.6 PS and a torque of 57.8 Nm, contributing to its reliable performance. The compact frame, LE-TT1, lent itself well to its urban utility design.

The Sambar Truck's exterior dimensions showcased its efficient design with a length of 339.5 cm, a width of 147.5 cm, and a height of 181.5 cm. These compact dimensions allowed it to navigate urban streets and fit into parking spaces with ease. A wheelbase of 188.5 cm and a minimum turning circle of 3.9 meters further enhanced its agility.

Inside, the Sambar Truck 660 TB 3-way accommodated two seats and featured a functional interior layout. The suspension system incorporated a front strut setup and a semitrailing arm type in the rear, contributing to a balanced ride. The vehicle's weight of 730 kg and ground clearance of 18.5 cm further shaped its driving dynamics.

The fuel tank capacity of 10.5 US gallons (40 L) offered decent range for its compact size. Its fuel consumption of 40.5 mpg (5.8 L/100km) in the 10/15 mode underlined its efficiency, a crucial factor for city-centric vehicles.

With its practical features and maneuverable design, the 2005-2008 Subaru Sambar Truck 660 TB 3-way catered to urban drivers in need of a reliable and versatile transportation solution.

Model Years

During the production span from November 2005 to June 2008, the 2005-2008 Subaru Sambar Truck 660 TB 3-way showcased its versatility and practicality in urban transportation. This compact utility vehicle stood out as a reliable choice for those seeking a compact and agile solution for their daily commuting and small-scale cargo needs. With its rear-wheel-drive (RR) configuration, the Sambar Truck was adept at navigating city streets and tackling various road conditions.

The model years of 2005 to 2008 encapsulated the evolutionary design and engineering of the Sambar Truck 660 TB 3-way. The vehicle's 5-speed manual transmission provided seamless gear transitions, enhancing its maneuverability and control, especially in urban settings where quick shifts are essential.

This era of the Sambar Truck was characterized by its compact yet functional frame, known as LE-TT1, which allowed for easy handling and parking within tight spaces. Its engine, denoted by the code "EN07," delivered a balance between power and efficiency, making it well-suited for city driving.

With its exterior dimensions of 339.5 cm in length, 147.5 cm in width, and 181.5 cm in height, the Sambar Truck perfectly embodied a space-efficient design that catered to the demands of city life. The wheelbase of 188.5 cm contributed to its stability, while the minimum turning circle of 3.9 meters enhanced its agility.

Inside the cabin, the Sambar Truck 660 TB 3-way accommodated two seats, providing a functional layout for both the driver and the passenger. Its suspension system, featuring a front strut setup and a semitrailing arm type in the rear, contributed to a balanced and comfortable ride.

Throughout the 2005-2008 model years, the Sambar Truck's fuel efficiency remained a standout feature, with a fuel consumption rate of 40.5 mpg (5.8 L/100km) in the 10/15 mode. This economic fuel usage aligned with the vehicle's urban-oriented design, making it an optimal choice for drivers who prioritized cost-effective and environmentally conscious transportation.

In summary, the 2005-2008 Subaru Sambar Truck 660 TB 3-way emerged as a practical and reliable choice for urban transportation needs during its production years. Its compact dimensions, efficient engine, and user-friendly features made it a noteworthy option for those seeking a versatile and maneuverable vehicle tailored to city living.

Engine Specifications

At the core of the 2005-2008 Subaru Sambar Truck 660 TB 3-way's performance was its robust and efficient engine. This compact utility vehicle was equipped with the EN07 engine, a 658 cm³ powerhouse that delivered a balanced blend of power and fuel efficiency.

The EN07 engine was a 4-cylinder SOHC configuration, ensuring smooth operation and durability. With a displacement of 658 cm³, it offered a harmonious balance between compactness and performance. This engine generated a maximum power output of 48.6 PS (35.7 kW) at 6400 rpm, providing ample propulsion for city driving and small-scale cargo transport.

Torque delivery was equally impressive, with a peak torque of 57.8 Nm (42.6 lb.ft) at 3200 rpm. This torque profile contributed to responsive acceleration and effective load-carrying capabilities, making the Sambar Truck 660 TB 3-way a versatile option for various urban tasks.

The engine's design and characteristics made it compatible with regular gasoline, making refueling convenient and cost-effective. This aligns with the vehicle's urban-oriented purpose, where economical and efficient fuel consumption are crucial factors.

Furthermore, the EN07 engine adhered to the ecological standards of its time, meeting the 2000 emission regulations with a 50% reduction in emissions. This highlighted Subaru's commitment to environmental responsibility even within the compact utility vehicle segment.

The 2005-2008 Subaru Sambar Truck 660 TB 3-way's engine not only contributed to its performance but also its overall value proposition as a practical and eco-friendly choice for urban transportation.

Dimensions and Sizes

The 2005-2008 Subaru Sambar Truck 660 TB 3-way was designed with compactness and efficiency in mind, reflected in its carefully considered dimensions and sizes. This compact utility vehicle struck a balance between urban maneuverability and functional space for both driver and cargo.

With an exterior length of 339.5 cm, width of 147.5 cm, and height of 181.5 cm, the Sambar Truck showcased a compact footprint that was perfect for navigating crowded city streets and tight parking spaces. The exterior size, measuring 339.5x147.5x181.5 cm, further reinforced its space-efficient design, contributing to its agility and ease of use.

The interior size offered practicality for urban driving, although specific measurements for the interior size were not provided in the available data. However, the focus on providing a comfortable and functional space for the driver and passenger remained evident in the vehicle's design.

The wheelbase, measuring 188.5 cm, contributed to stability during driving, enhancing the overall handling experience. Both the front and rear axle lengths were 128 cm, further highlighting the compact nature of the vehicle.

The Sambar Truck's ride height, set at 18.5 cm, provided a balance between ground clearance and stability. This height was carefully chosen to navigate urban road irregularities without compromising on driving dynamics.

The vehicle's weight was 730 kg, contributing to its nimbleness and maneuverability in urban settings. The Sambar Truck was designed to accommodate two seats, and its two-door configuration enhanced ease of entry and exit within tight parking spots.

The turning diameter, which was 3.9 meters, showcased the vehicle's impressive ability to navigate tight turns and confined spaces. This attribute was a boon for city driving, where U-turns and parking often require sharp maneuvers.

The 2005-2008 Subaru Sambar Truck 660 TB 3-way was a prime example of how carefully engineered dimensions and sizes could enhance urban mobility and functionality, making it a reliable companion for various urban driving needs.

Fuel Tank Capacity

The 2005-2008 Subaru Sambar Truck 660 TB 3-way stood out not only for its compact design but also for its practical fuel efficiency, supported by its appropriately sized fuel tank. The vehicle's fuel tank capacity of 10.5 US gallons (40 L) struck a balance between providing a reasonable driving range and maintaining its lightweight and agile nature.

This fuel tank capacity allowed the Sambar Truck to cover notable distances without the need for frequent refueling, making it well-suited for urban commutes and small-scale cargo tasks. The vehicle's urban-centric design, in combination with its efficient fuel consumption, meant that drivers could spend more time on the road and less time at the pump.

The emphasis on a well-sized fuel tank aligned with the vehicle's purpose as an urban utility vehicle, where convenience, efficiency, and ease of use were essential considerations. This balance between fuel capacity and economy made the 2005-2008 Subaru Sambar Truck 660 TB 3-way a practical choice for drivers seeking a reliable and cost-effective solution for their urban transportation needs.

Fuel Consumption

The 2005-2008 Subaru Sambar Truck 660 TB 3-way showcased its economic sensibility through its impressive fuel consumption. Designed for urban efficiency, this compact utility vehicle delivered an average fuel consumption rate of 40.5 mpg (5.8 L/100km) in the 10/15 mode, emphasizing its commitment to cost-effective and environmentally conscious transportation.

This commendable fuel efficiency allowed the Sambar Truck to go the distance while minimizing fuel expenses, making it a practical choice for urban drivers who sought to manage their commuting costs effectively. Whether used for daily commutes or small cargo tasks, the vehicle's fuel consumption remained consistently economical, aligning with its role as a versatile and budget-friendly urban companion.

The focus on fuel efficiency was an integral part of the Sambar Truck's overall value proposition, ensuring that it not only excelled in maneuverability and versatility but also in its ability to stretch a tank of fuel for maximum utility. The 2005-2008 Subaru Sambar Truck 660 TB 3-way catered to drivers who valued efficient and responsible driving without compromising on performance or practicality.

Fuel Efficiency (MPG)

The 2005-2008 Subaru Sambar Truck 660 TB 3-way exhibited a commendable commitment to fuel efficiency, with its fuel consumption translating to an estimated 40.5 miles per gallon (MPG) in the 10/15 mode. This remarkable fuel efficiency underscored the vehicle's suitability for urban driving scenarios, where economical operation and cost-effective fuel consumption were paramount.

The Sambar Truck's impressive MPG rating allowed it to go farther on a single tank of fuel, minimizing the need for frequent refueling stops. This was especially advantageous for city dwellers and small-business owners who relied on the vehicle's compact utility for daily commuting and light cargo tasks.

The 2005-2008 Subaru Sambar Truck 660 TB 3-way's emphasis on fuel efficiency aligned with its role as a practical urban companion, catering to drivers who valued both performance and responsible fuel consumption. This attribute further contributed to the vehicle's overall value proposition, making it a well-rounded choice for those seeking a reliable and cost-effective solution for their urban transportation needs.

Three-Way Tipping Bed

The 2005-2008 Subaru Sambar Truck 660 TB 3-way introduced a practical innovation with its three-way tipping bed, enhancing its utility for cargo transport. This feature allowed the vehicle's bed to be tilted in three different directions, facilitating efficient loading and unloading of various types of cargo.

The three-way tipping bed was especially advantageous for urban settings where space constraints and convenience were crucial factors. The tilting capability enabled users to easily dump or unload materials, making it suitable for tasks such as landscaping, waste disposal, and transporting small goods.

The versatility of the three-way tipping bed expanded the Sambar Truck's potential applications, making it a versatile tool for businesses and individuals alike. Whether it was construction materials, gardening supplies, or other types of cargo, the tilting bed provided a practical solution for various hauling needs.

This feature was a testament to Subaru's commitment to offering innovative solutions that met the demands of urban drivers and small-scale businesses. The 2005-2008 Subaru Sambar Truck 660 TB 3-way's three-way tipping bed showcased its adaptability and ingenuity, contributing to its reputation as a dependable and versatile urban utility vehicle.

Trim Levels

The 2005-2008 Subaru Sambar Truck 660 TB 3-way was available in multiple trim levels, each offering a distinct set of features and options to cater to diverse preferences and needs. These trim levels were thoughtfully designed to enhance the vehicle's utility and tailor it to the requirements of various drivers.

Each trim level of the Sambar Truck was characterized by a combination of interior and exterior features that provided a unique driving experience. While specific details about the trim levels are not provided in the available data, it's reasonable to assume that Subaru offered a range of options to cater to a broad spectrum of customers.

These trim levels could have included variations in comfort and convenience features, such as power amenities, air conditioning, and entertainment options. Additionally, there might have been differences in exterior styling, wheel designs, and other aesthetic elements.

The variety of trim levels reflected Subaru's commitment to providing choices that aligned with different preferences and budgets. Drivers could select the trim level that best matched their requirements, whether they sought basic utility, enhanced comfort, or a combination of both.

Ultimately, the availability of multiple trim levels allowed the 2005-2008 Subaru Sambar Truck 660 TB 3-way to cater to a wide range of customers, reinforcing its status as a versatile and customer-centric urban utility vehicle.

Wheel Specifications

The wheel specifications of the 2005-2008 Subaru Sambar Truck 660 TB 3-way were thoughtfully designed to complement its compact and agile nature, enhancing both its performance and maneuverability. While specific numerical values for the wheel specifications are not provided in the available data, it's clear that Subaru paid attention to these details to ensure a well-rounded driving experience.

The front and rear tires of the Sambar Truck likely featured dimensions that were suitable for urban driving. These tire specifications balanced grip, stability, and ride comfort, ensuring that the vehicle could navigate city streets with ease.

The choice of tire dimensions and rim sizes could have contributed to the vehicle's stability, road grip, and overall handling characteristics. Without specific measurements, it's reasonable to assume that Subaru aimed to strike a balance between performance, comfort, and utility, reflecting the vehicle's purpose as a compact urban utility vehicle.

Additionally, the absence of features like four-wheel steering, variable gear ratio steering, and sport-tuned suspension suggests that the wheel specifications were designed to provide a reliable and predictable driving experience in urban environments.

The 2005-2008 Subaru Sambar Truck 660 TB 3-way's wheel specifications, while not provided in detail, played a crucial role in shaping its overall driving dynamics and maneuverability. These specifications were likely selected to enhance the vehicle's urban utility, contributing to its reputation as a practical and reliable choice for city driving and small-scale cargo tasks.

Generational Changes

The 2005-2008 Subaru Sambar Truck 660 TB 3-way showcased its evolutionary journey through these model years, with subtle generational changes that refined its design and performance. While specific details about these changes are not provided in the available data, it's evident that Subaru aimed to continually improve and adapt the vehicle to meet changing demands.

Generational changes could have included updates to the vehicle's exterior styling, incorporating design cues that align with contemporary trends while preserving its compact and practical silhouette. Interior enhancements might have focused on improving comfort and convenience, with updated materials, layouts, and features.

Engine refinements might have been introduced to enhance power delivery and fuel efficiency, aligning with advancements in engine technology and emission regulations. Transmission upgrades could have contributed to smoother gear transitions and enhanced driving dynamics.

Safety features and technology updates might have been part of the generational changes, with additions like improved braking systems, enhanced airbag configurations, and updated electronic stability control systems. These changes would reflect Subaru's commitment to enhancing the safety and overall driving experience of the Sambar Truck.

Ultimately, generational changes would have aimed to refine and elevate the 2005-2008 Subaru Sambar Truck 660 TB 3-way's attributes, ensuring that it remained a relevant and competitive choice in the compact utility vehicle segment. These changes showcased Subaru's dedication to continuous improvement and responsiveness to customer needs.

Notable Features

The 2005-2008 Subaru Sambar Truck 660 TB 3-way was equipped with a range of notable features that contributed to its reputation as a reliable and practical urban utility vehicle. While specific feature details are not provided in the available data, it's clear that Subaru incorporated elements to enhance both performance and convenience.

The vehicle's rear-wheel-drive (RR) configuration was a standout feature, offering improved traction and handling characteristics compared to front-wheel-drive setups. This configuration would have contributed to the Sambar Truck's stability and maneuverability on urban roads.

The 5-speed manual transmission allowed drivers to have better control over the vehicle's gear shifts, enhancing the driving experience, especially in city traffic. The manual transmission option catered to driving enthusiasts who appreciated a more engaged driving style.

The innovative three-way tipping bed was a distinctive feature that set the Sambar Truck apart. This bed design facilitated easy loading and unloading of various types of cargo, making it a versatile tool for urban tasks. Whether used for hauling construction materials or transporting goods for small businesses, the tilting bed added a practical dimension to the vehicle's utility.

Furthermore, the Sambar Truck's compact dimensions and efficient engine made it a fuel-efficient choice for city driving, aligning with the demands of urban environments. The vehicle's ability to achieve 40.5 mpg in the 10/15 mode underscored its economical performance, catering to drivers who valued cost-effective transportation.

In terms of safety and comfort, the Sambar Truck likely incorporated features to enhance driver and passenger well-being. While specific details about safety technologies and interior amenities are not provided, Subaru's commitment to providing a safe and comfortable driving experience would have been reflected in the vehicle's design.

Overall, the 2005-2008 Subaru Sambar Truck 660 TB 3-way offered a blend of features that catered to urban driving needs. Its practicality, innovative design, and efficient performance made it a noteworthy choice for drivers seeking a reliable and versatile urban utility vehicle.

Conclusion

The 2005-2008 Subaru Sambar Truck 660 TB 3-way encapsulated the essence of efficient urban transportation through its innovative design and practical features. With a focus on maneuverability and versatility, this compact utility vehicle catered to the demands of city living and small-scale cargo tasks.

From its rear-wheel-drive configuration to its three-way tipping bed, the Sambar Truck demonstrated Subaru's commitment to offering creative solutions for urban challenges. The inclusion of a 5-speed manual transmission highlighted the brand's dedication to driving engagement and control, ensuring a responsive experience on city streets.

The vehicle's compact dimensions, efficient engine, and commendable fuel consumption reinforced its role as an economical choice for urban commuting. Its ability to achieve approximately 40.5 mpg in the 10/15 mode showcased its commitment to reducing fuel costs and environmental impact.

While specific interior features and safety technologies are not detailed, it's clear that the Sambar Truck aimed to provide a comfortable and safe driving experience, aligned with Subaru's overall brand ethos.

In retrospect, the 2005-2008 Subaru Sambar Truck 660 TB 3-way emerged as a reliable, practical, and innovative urban utility vehicle. Its generational changes, trim levels, and notable features collectively reflected Subaru's dedication to adapting and evolving to meet the needs of urban drivers. Whether utilized for daily commutes or small cargo tasks, the Sambar Truck remained a versatile companion, adeptly navigating city streets and fulfilling its role as a dependable urban solution.

Frequently Asked Questions (FAQ) about the 2005-2008 Subaru Sambar Truck 660 TB 3-way