1992 Toyota Celsior 4.0 B specification Specs

OVERVIEW

With a fuel consumption of 16.9 mpg US - 20.3 mpg UK - 13.9 L/100km, a weight of 3902 lbs (1770 kg), the Toyota Celsior 4.0 B specification has a water cooling V-type 8 cylinder DOHC32 valve engine, a High octane premium gasoline engine 1UZ-FE. This engine 1UZ-FE produces a maximum power of 263.6 PS (260 bhp - 193.8 kW) at 5400 rpm and a maximum torque of 353 Nm (260.3 lb.ft - 36 kg.m) at 4600 rpm. The engine power is transmitted to the road by the rear wheel drive (FR) with a 4AT gearbox. For stopping power, the Toyota Celsior 4.0 B specification braking system includes Ventilated disk at the rear and Ventilated disk at the front. Stock tire sizes are 225/60 on 16 inch rims 98H at the rear and 225/60 on 16 inch rims 98H at the front. Chassis details - Toyota Celsior 4.0 B specification has double wishbone coil spring rear suspension and double wishbone coil spring front suspension for road holding and ride confort.

Add to compare list

- Present
- Option
- Not Present (or Dealer Option)

• Search Car Specs
• Other Celsior Specs Database

More photos Toyota Celsior

By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on April 19, 2024

Overview of the 1992-1994 Toyota Celsior 4.0 B

The 1992-1994 Toyota Celsior 4.0 B was a luxury sedan that left a lasting impression in the automotive market. With its exquisite design and high-performance capabilities, it catered to discerning drivers seeking both comfort and power.

Under the hood, the Celsior 4.0 B featured a robust 4.0-liter V8 engine with an engine code of 1UZ-FE. This powerful powertrain churned out an impressive 260 horsepower at 5400 RPM, accompanied by a peak torque of 353 Nm at 4600 RPM. Its water-cooled V8, DOHC32 valve configuration, and a compression ratio of 10 contributed to its smooth and efficient performance.

The sedan's exterior dimensions were noteworthy, measuring approximately 499.5 cm in length, 183 cm in width, and 143 cm in height. These generous proportions provided ample space for its comfortable interior, accommodating five passengers across four doors. The wheelbase spanned 281.5 cm, ensuring a stable and smooth ride, while the minimum turning circle of 5.5 meters offered maneuverability in various driving conditions.

In terms of fuel efficiency, the Celsior 4.0 B showcased commendable figures. With a fuel tank capacity of 22.4 US gallons, it provided an excellent driving range, supported by a fuel consumption rate of 16.9 mpg in the 10/15 mode and an impressive 33.1 mpg at 60 km/h. These figures made it a well-balanced choice for both city commuting and highway journeys.

The suspension system of the Celsior 4.0 B comprised a double wishbone coil spring setup for both the front and rear, ensuring a comfortable and controlled ride. Ventilated disc brakes on all four wheels offered reliable stopping power, enhancing safety during braking maneuvers.

Inside the cabin, the sedan boasted various amenities, including power windows, power steering, and an adjustable steering column. The wood panel accents added a touch of elegance to the interior, complementing the leather-wrapped components, such as the steering wheel and seats. The driver's experience was further enhanced with the inclusion of cruise control, making long drives a breeze.

Safety was a priority, as evidenced by the standard driver's airbag and side impact bars. Additionally, the Celsior 4.0 B featured Traction Control System (TCS) for improved stability and traction on slippery roads, ensuring a secure driving experience.

The 1992-1994 Toyota Celsior 4.0 B specification offered a harmonious blend of performance, comfort, and safety, making it a sought-after choice for luxury sedan enthusiasts during its production period. Its timeless design and impressive specifications have solidified its place as a classic and desirable vehicle among automotive enthusiasts worldwide.

Engine Specifications and Performance

The heart of the 1992-1994 Toyota Celsior 4.0 B lies in its formidable engine, boasting impressive specifications and delivering outstanding performance. This luxury sedan was equipped with a potent 4.0-liter V8 engine, renowned as the 1UZ-FE. The engine's V-type configuration, featuring eight cylinders and Dual Overhead Cam (DOHC) with 32 valves, showcased Toyota's commitment to engineering excellence.

Generating an awe-inspiring power output of 260 horsepower at 5400 RPM, the Celsior 4.0 B demonstrated its capability to provide a thrilling driving experience. The engine's peak torque of 353 Nm at 4600 RPM further emphasized its dynamic performance, ensuring smooth acceleration and responsive power delivery.

With a compression ratio of 10, the engine achieved a perfect balance between power and fuel efficiency. The 4.0-liter displacement (3968 cm3) showcased its ability to handle various driving conditions with ease.

The Toyota Celsior 4.0 B's engine ran on high-octane premium gasoline, optimizing its performance potential and adhering to the brand's commitment to delivering excellence in engineering.

Furthermore, the sedan's engine was mated to a 4-speed automatic transmission, offering seamless gear shifts and enhancing overall driving comfort. The transmission's smooth operation complemented the engine's performance, ensuring a refined and enjoyable ride.

Thanks to the well-engineered powertrain, the Celsior 4.0 B achieved an impressive fuel consumption rate. Its efficiency was evident in its fuel consumption figures, recording 16.9 mpg in the 10/15 mode and an impressive 33.1 mpg at 60 km/h. This balance between power and fuel efficiency made it an attractive option for drivers seeking a luxurious yet economical driving experience.

Overall, the 1992-1994 Toyota Celsior 4.0 B's engine specifications and performance capabilities exemplified the brand's commitment to delivering a luxurious and powerful driving experience. The fusion of a robust V8 engine, seamless transmission, and efficient fuel consumption showcased Toyota's prowess in engineering and design, solidifying the Celsior 4.0 B as a remarkable luxury sedan in its era.

Fuel Tank Capacity and Fuel Efficiency

The 1992-1994 Toyota Celsior 4.0 B proved to be an efficient and well-rounded luxury sedan, boasting a commendable fuel tank capacity and impressive fuel efficiency. With its focus on providing a seamless driving experience, this vehicle catered to those seeking both performance and economy.

The fuel tank capacity of the Celsior 4.0 B stood at 22.4 US gallons (85 liters), providing ample room for fuel storage. This generous capacity ensured an extended driving range, allowing drivers to embark on longer journeys without frequent refueling stops.

Equipped with a 4.0-liter V8 engine, the Celsior 4.0 B demonstrated its efficiency through its fuel consumption rates. During city driving and combined conditions (10/15 mode), the sedan showcased a fuel consumption rate of approximately 16.9 mpg in the US, which is equivalent to 13.9 liters per 100 kilometers. On the highway, it exhibited an even more impressive rate of around 33.1 mpg in the US, equivalent to 7.1 liters per 100 kilometers at a speed of 60 km/h. This balance between power and fuel efficiency made the Celsior 4.0 B an attractive choice for daily commuting and long-distance travel alike.

The synergy between the fuel tank capacity and the fuel efficiency of the Celsior 4.0 B ensured that drivers could experience extended driving ranges without compromising on performance. This feature contributed to a more convenient and enjoyable driving experience, particularly during extended journeys where fewer refueling stops were required.

In summary, the 1992-1994 Toyota Celsior 4.0 B offered a notable fuel tank capacity and impressive fuel efficiency, catering to drivers who sought both luxury and practicality. With its balance of power and economy, this luxury sedan proved to be a reliable and efficient companion on the roads, making it a sought-after choice in its era.

Dimensions and Size Details

The 1992-1994 Toyota Celsior 4.0 B boasted impressive dimensions, providing ample space for both occupants and cargo. This luxury sedan exuded a sense of sophistication with its well-proportioned and stylish design.

Measuring approximately 499.5 cm in exterior length, 183 cm in exterior width, and 143 cm in exterior height, the Celsior 4.0 B showcased a commanding presence on the road. Its sleek and elegant profile further enhanced its visual appeal, making it stand out among its peers.

The interior of the Celsior 4.0 B offered a comfortable and spacious environment for passengers. With an interior length of around 201 cm, interior width of approximately 151.5 cm, and interior height of about 116 cm, occupants could enjoy a generous amount of legroom, shoulder room, and headroom, promoting a pleasant and relaxing journey.

The sedan's wheelbase measured approximately 281.5 cm, contributing to its stability and smooth handling on various road surfaces. Additionally, the minimum turning circle of 5.5 meters enhanced maneuverability, making it easy to navigate through tight spots and urban streets.

The Celsior 4.0 B accommodated five passengers across four doors, making it a practical choice for families or those who preferred spacious seating arrangements.

In terms of weight, the sedan registered approximately 1770 kg, which further attested to its solid build quality and stability on the road.

The sedan's rear and front axle lengths measured approximately 155.5 cm and 156.5 cm, respectively, contributing to its balanced weight distribution and driving dynamics.

The ground clearance of the Celsior 4.0 B stood at 15.5 cm, striking a balance between a comfortable ride and sufficient clearance for various road conditions.

In summary, the 1992-1994 Toyota Celsior 4.0 B impressed with its dimensions and size details, offering ample space and a well-designed interior for occupants to enjoy a luxurious and comfortable driving experience. Its combination of style, spaciousness, and stability made it an appealing choice for those seeking a refined and elegant luxury sedan.

Wheel and Tire Specifications

The 1992-1994 Toyota Celsior 4.0 B was equipped with a well-engineered wheel and tire setup, ensuring a smooth and comfortable ride while maintaining its elegant appearance. The sedan's wheel and tire specifications were carefully selected to complement its performance and overall driving experience.

The Celsior 4.0 B featured 16-inch rims, contributing to its refined and sophisticated look. The front and rear tires measured approximately 225/60 R16 98H, providing a perfect balance between performance and comfort. The 225 mm width offered excellent road grip, while the 60 aspect ratio ensured a smooth and cushioned ride.

The tires' load index of 98H indicated their ability to support a significant load and maintain their performance even under heavy loads. The H speed rating further attested to their capacity to handle speeds of up to 130 mph (210 km/h) with stability and precision.

Additionally, the sedan's suspension system played a crucial role in maintaining a comfortable and controlled ride. The front suspension featured a double wishbone coil spring setup, while the rear suspension boasted the same configuration, ensuring excellent stability and responsive handling.

Furthermore, the Celsior 4.0 B's front and rear brakes featured ventilated disks, providing reliable and efficient braking performance. The combination of well-engineered tires and responsive brakes contributed to enhanced safety and control on the road.

Overall, the 1992-1994 Toyota Celsior 4.0 B's wheel and tire specifications showcased the brand's commitment to delivering a luxurious and enjoyable driving experience. The carefully selected tire dimensions, complemented by the suspension and braking system, provided a perfect balance between comfort, performance, and safety, making the Celsior 4.0 B a top choice for those seeking both style and substance in a luxury sedan.

Trim Levels and Variants

The 1992-1994 Toyota Celsior 4.0 B was offered in various trim levels and variants, catering to the preferences of different customers. Each trim level came with its unique set of features and amenities, allowing buyers to choose the one that best suited their needs and desires.

The 4.0 B specification was one of the prominent trim levels available for the Celsior during this period. As the name suggests, it was powered by a robust 4.0-liter V8 engine, known as the 1UZ-FE, delivering an impressive 260 horsepower and 353 Nm of torque. This trim level boasted a luxurious and comfortable interior, accentuated by leather-wrapped components and wood panel accents, exuding an air of sophistication.

Standard features in the 4.0 B specification included power windows, power steering, and a tachometer, offering convenience and essential information to the driver. Additionally, the presence of cruise control enhanced long-distance driving comfort.

Safety was a priority in the 4.0 B specification, with driver's airbags and side impact bars coming as standard. The Traction Control System (TCS) provided added stability and traction during various driving conditions, ensuring a secure and controlled ride.

As for the exterior, this trim level featured standard front fog lamps, providing improved visibility in adverse weather conditions. Power-adjustable door mirrors offered convenience and ease of use, further enhancing the overall driving experience.

Buyers also had the option to include leather seats, offering a premium and luxurious touch to the already well-appointed interior. The power-adjustable front seats provided customizable comfort for both the driver and front passenger.

In summary, the 1992-1994 Toyota Celsior 4.0 B specification and its various trim levels and variants offered an array of choices for luxury sedan enthusiasts. Whether it was the well-equipped 4.0 B specification or other available variants, each option catered to a specific set of preferences, ensuring that buyers could find a Celsior that matched their desired level of luxury and performance.

Interior Features and Amenities

The interior of the 1992-1994 Toyota Celsior 4.0 B specification exuded luxury and comfort, offering a host of features and amenities that catered to the needs of both drivers and passengers alike.

The sedan's interior was thoughtfully designed, boasting power windows that allowed for effortless control over all side windows. Power steering provided smooth handling and ease of maneuverability, making driving a hassle-free experience.

To keep the driver well-informed, the Celsior 4.0 B specification was equipped with a tachometer, providing valuable data about the engine's RPM, which aided in maintaining optimal driving performance.

Centralized door locking further enhanced convenience, allowing the driver to lock or unlock all doors from a single control point. Additionally, keyless entry provided an added layer of convenience, enabling the driver to unlock the doors without physically using the key.

The Celsior 4.0 B specification was designed to accommodate both right-hand drive (standard) and left-hand drive (optional) configurations, catering to the preferences of drivers in different regions.

Steering adjustments were made effortless with the presence of an adjustable, telescopic, and tilt steering column, allowing the driver to find the ideal driving position for maximum comfort and control.

Wood panel accents added a touch of elegance to the interior, further elevating the premium feel of the sedan. The carefully crafted wood elements complemented the leather-wrapped steering wheel, contributing to an overall luxurious ambiance.

Cruise control, a standard feature, enhanced long-distance driving comfort by allowing the driver to maintain a constant speed without continuous accelerator input.

The Celsior 4.0 B specification offered power-adjustable front seats, ensuring that both the driver and front passenger could find their preferred seating position for optimal comfort during the journey.

In summary, the 1992-1994 Toyota Celsior 4.0 B specification's interior featured an array of well-appointed amenities and features, emphasizing comfort, convenience, and luxury. From power windows and steering to the thoughtful inclusion of wood panel accents and adjustable seats, the sedan catered to drivers seeking a refined and comfortable driving experience.

Safety Features and Ratings

The 1992-1994 Toyota Celsior 4.0 B specification prioritized safety, offering a range of features to ensure the well-being of both occupants and pedestrians.

Standard safety features included driver's airbags, providing an added layer of protection in the event of a collision. The presence of side impact bars further enhanced occupant safety by reinforcing the structural integrity of the vehicle's sides.

To enhance stability and control, the Celsior 4.0 B specification was equipped with a Traction Control System (TCS). This feature helped prevent wheel slippage on slippery surfaces, ensuring a secure and controlled drive, especially in adverse weather conditions.

The sedan's safety belt system featured a 3-point safety belt for all seating positions, securing occupants in place during a crash. Safety belt pretensioners reduced slack during sudden braking or impacts, maximizing the effectiveness of the seat belts.

To promote visibility for surrounding vehicles, the Celsior 4.0 B specification featured additional stop lights, alerting trailing drivers to braking actions. This enhanced visibility played a role in preventing rear-end collisions.

For child safety, the sedan came equipped with provisions for child car restraints, ensuring that young passengers were secure and protected during the journey.

While specific safety ratings for the 1992-1994 Toyota Celsior 4.0 B specification may not be available, Toyota's commitment to safety and engineering excellence was well-established during this period. The sedan's robust build quality and safety features contributed to a reassuring and confident driving experience for its occupants.

Overall, the 1992-1994 Toyota Celsior 4.0 B specification boasted safety features that prioritized occupant protection and accident prevention. The inclusion of driver's airbags, side impact bars, Traction Control System (TCS), and various safety belt features demonstrated Toyota's dedication to ensuring safety on the road, making the Celsior 4.0 B a reliable and secure luxury sedan choice.

Reliability and Longevity

The 1992-1994 Toyota Celsior 4.0 B specification earned a reputation for its remarkable reliability and longevity, cementing its status as a durable and dependable luxury sedan.

Toyota's commitment to engineering excellence and rigorous quality control ensured that the Celsior 4.0 B was built with precision and attention to detail. The sedan's robust construction and reliable components contributed to its ability to withstand the test of time and various driving conditions.

The 4.0-liter V8 engine, known as the 1UZ-FE, was a renowned powertrain with a proven track record of durability. With proper maintenance and regular servicing, this engine demonstrated resilience and longevity, providing drivers with years of smooth and trouble-free performance.

The sedan's interior and exterior materials were carefully chosen for their durability, ensuring that the Celsior 4.0 B maintained its elegant appearance even after years of use.

Owners and enthusiasts alike praised the Celsior 4.0 B for its minimal maintenance requirements and overall low ownership costs. Toyota's reputation for building reliable vehicles was evident in this luxury sedan, inspiring confidence in its long-term performance.

In addition to its mechanical reliability, the Celsior 4.0 B specification's safety features further contributed to its longevity. With standard driver's airbags and side impact bars, the sedan prioritized occupant protection, instilling peace of mind for drivers and passengers alike.

Owners who diligently followed the recommended maintenance schedule and cared for their Celsior 4.0 B found that the sedan's performance and comfort remained consistently high over the years, solidifying its status as a reliable and enduring choice in the luxury sedan segment.

In conclusion, the 1992-1994 Toyota Celsior 4.0 B specification exemplified Toyota's commitment to building reliable and long-lasting vehicles. With its durable components, robust engine, and low ownership costs, the Celsior 4.0 B proved to be a dependable luxury sedan that provided both comfort and peace of mind for its owners, earning its place as a sought-after and enduring model.

Maintenance and Ownership Costs

The 1992-1994 Toyota Celsior 4.0 B specification offered owners a favorable balance between maintenance costs and ownership expenses, making it an appealing choice for those seeking a luxury sedan with manageable long-term costs.

Toyota's reputation for building reliable vehicles was evident in the Celsior 4.0 B, with its robust construction and durable components. This reliability translated to reduced maintenance requirements, allowing owners to enjoy a trouble-free driving experience for an extended period.

Routine maintenance, such as regular oil changes, fluid checks, and scheduled servicing, played a crucial role in keeping the Celsior 4.0 B running smoothly. Following the recommended maintenance schedule, as outlined in the owner's manual, helped preserve the sedan's performance and longevity, minimizing the likelihood of unexpected repairs.

The 4.0-liter V8 engine, known for its durability, demonstrated fuel efficiency without sacrificing power. This engine's efficiency contributed to manageable fuel costs, making the Celsior 4.0 B an economical choice for daily commuting and long-distance travel.

In terms of ownership costs, the Celsior 4.0 B specification's reliability and solid build quality resulted in lower overall expenses over time. Owners reported that the sedan's well-engineered components required fewer replacements, leading to reduced maintenance and repair costs compared to less reliable alternatives.

Insurance costs for the Celsior 4.0 B were generally reasonable due to its strong safety features, including driver's airbags and side impact bars. These safety features not only provided peace of mind for owners but also potentially led to lower insurance premiums.

Additionally, Toyota's reputation for excellent customer service and reliable dealership networks further contributed to a positive ownership experience for Celsior 4.0 B owners.

In summary, the 1992-1994 Toyota Celsior 4.0 B specification offered owners an attractive package of reliability, manageable maintenance costs, and overall ownership affordability. With routine maintenance and care, this luxury sedan demonstrated a remarkable ability to maintain its performance and condition over time, making it a compelling choice for those seeking a durable and cost-effective luxury driving experience.

MPG and Fuel Average

The 1992-1994 Toyota Celsior 4.0 B specification showcased commendable fuel efficiency, making it an economical and environmentally-conscious choice in the luxury sedan segment.

Powered by a 4.0-liter V8 engine, known as the 1UZ-FE, the Celsior 4.0 B achieved impressive fuel consumption figures. During city driving and combined conditions (10/15 mode), the sedan recorded approximately 16.9 miles per gallon (mpg) in the US, equivalent to 13.9 liters per 100 kilometers. This efficiency made it an ideal option for urban commuters seeking a balance between luxury and economy.

On the highway, the Celsior 4.0 B demonstrated even greater fuel efficiency, achieving around 33.1 mpg in the US, equivalent to 7.1 liters per 100 kilometers, when driving at a steady speed of 60 km/h. This exceptional highway fuel average made it a desirable choice for long-distance travelers who sought both comfort and cost-effectiveness.

The sedan's high-octane premium gasoline fuel type optimized engine performance and fuel efficiency, ensuring a smooth and efficient driving experience across various road conditions.

The Celsior 4.0 B's fuel efficiency was complemented by its 22.4 US gallons (85 liters) fuel tank capacity, providing an extended driving range before requiring refueling stops.

With its impressive MPG and fuel average, the 1992-1994 Toyota Celsior 4.0 B specification demonstrated Toyota's commitment to engineering fuel-efficient and environmentally-friendly vehicles, without compromising on performance and luxury. Whether for daily commutes or long journeys, the Celsior 4.0 B offered an economical and sustainable driving option for luxury sedan enthusiasts.

Comparison with Competing Models

The 1992-1994 Toyota Celsior 4.0 B specification stood out in its segment, offering a compelling package of luxury, performance, and reliability. When compared to competing models during its time, the Celsior 4.0 B showcased several advantages that set it apart from the competition.

One of the key highlights of the Celsior 4.0 B was its powerful and efficient 4.0-liter V8 engine, known as the 1UZ-FE. This engine delivered an impressive 260 horsepower and 353 Nm of torque, providing ample power for smooth acceleration and confident highway driving. Additionally, its fuel efficiency, especially on the highway, surpassed many of its competitors, making it an economical choice for long-distance travel.

The sedan's spacious and luxurious interior was another area where it outshined its rivals. With generous legroom, headroom, and shoulder room, the Celsior 4.0 B offered a comfortable and inviting cabin for both driver and passengers. The inclusion of wood panel accents and leather-wrapped components further enhanced the sense of refinement and elegance within the interior.

In terms of safety, the Celsior 4.0 B specification boasted standard driver's airbags and side impact bars, providing enhanced occupant protection during collisions. The Traction Control System (TCS) also contributed to improved stability and control, particularly on slippery surfaces, setting it apart from some of its competitors.

When considering ownership costs, the Celsior 4.0 B's reputation for reliability and low maintenance requirements gave it a competitive edge. Owners appreciated the sedan's long-term dependability, resulting in reduced maintenance and repair expenses over time compared to certain rival models.

While the Celsior 4.0 B faced stiff competition from other luxury sedans, its blend of performance, efficiency, comfort, and reliability made it a stand-out option in its class. Toyota's commitment to engineering excellence and customer satisfaction contributed to the Celsior 4.0 B's strong appeal among luxury sedan enthusiasts, solidifying its position as a sought-after model during its production years.

Historical Significance and Legacy

The 1992-1994 Toyota Celsior 4.0 B specification holds historical significance as a representation of Toyota's dedication to luxury and engineering excellence during this period. As part of the first-generation Celsior lineup, this luxury sedan left a lasting legacy in the automotive world.

Toyota introduced the Celsior model in 1989 as a flagship luxury sedan, aiming to compete with other high-end brands in the global market. The 1992-1994 Toyota Celsior 4.0 B specification, with its 4.0-liter V8 engine and luxurious interior, exemplified the brand's pursuit of elegance, comfort, and performance.

During its production years, the Celsior 4.0 B specification garnered positive reviews from both critics and consumers. It impressed drivers with its smooth and powerful V8 engine, offering a balance of performance and efficiency that was hard to match in its class.

The sedan's reputation for reliability and low maintenance costs further contributed to its long-lasting legacy. Many owners found their Celsior 4.0 B models to be durable and dependable, with some even becoming prized collectibles due to their well-engineered build and timeless design.

Toyota's commitment to safety was evident in the Celsior 4.0 B, featuring standard driver's airbags and side impact bars at a time when such safety features were becoming increasingly important to consumers.

The Celsior 4.0 B specification's legacy extended beyond its production years, influencing the design and features of subsequent Toyota and Lexus luxury models. Some of its technologies and advancements paved the way for future innovations in the automotive industry.

As a representation of Toyota's pursuit of luxury and excellence, the 1992-1994 Toyota Celsior 4.0 B specification remains a notable vehicle in the brand's history. Its combination of performance, comfort, and reliability solidified its place as a significant model in the luxury sedan segment, leaving a lasting impact on Toyota's reputation as a maker of premium automobiles.

Availability in the Used Car Market

The 1992-1994 Toyota Celsior 4.0 B specification is still sought after in the used car market by enthusiasts and collectors alike. Despite being a vehicle from the early 1990s, its popularity has endured due to its timeless design, reliable performance, and luxurious features.

In the used car market, the availability of the Celsior 4.0 B specification may vary depending on the region and demand. As it was a premium luxury sedan during its production years, finding well-maintained and low-mileage examples can be a bit challenging, but not impossible.

Enthusiasts appreciate the sedan's V8 engine, which has earned a reputation for its durability and smooth power delivery. This has contributed to a strong demand for the Celsior 4.0 B specification among those seeking a luxurious yet performance-oriented driving experience.

The sedan's well-appointed interior, featuring leather seats and wood panel accents, adds to its allure in the used car market. Many buyers are drawn to the timeless elegance and comfort offered by the Celsior 4.0 B, making it a popular choice among luxury car enthusiasts.

One factor that enhances the vehicle's desirability is its reputation for being relatively affordable to maintain compared to some other luxury models from the same era. This aspect appeals to buyers looking for a premium vehicle without excessive ownership costs.

The availability of the Celsior 4.0 B specification in the used car market highlights its lasting appeal and the enduring legacy of this Toyota luxury sedan. As a well-built and reliable model, it continues to captivate drivers who appreciate a classic and sophisticated driving experience in a used vehicle. For those willing to invest time and effort in finding a well-maintained unit, the Celsior 4.0 B offers a taste of luxury and performance from a bygone era with a touch of modern nostalgia.

Conclusion: A Classic Luxury Sedan with Impressive Specs

The 1992-1994 Toyota Celsior 4.0 B specification stands as a classic luxury sedan that continues to impress with its remarkable specifications. As part of the first-generation Celsior lineup, this model embodies Toyota's commitment to engineering excellence and premium craftsmanship.

At the heart of the Celsior 4.0 B specification is its potent 4.0-liter V8 engine, the 1UZ-FE, renowned for its smooth performance and efficiency. With 260 horsepower and 353 Nm of torque at its disposal, the sedan offers a seamless driving experience with ample power for both city and highway driving.

The interior of the Celsior 4.0 B specification exudes luxury and comfort, featuring leather seats, wood panel accents, and a range of amenities that cater to the needs of both driver and passengers. Its spacious cabin ensures a relaxed journey for all occupants, making it an ideal choice for long-distance travel.

In terms of safety, the Celsior 4.0 B specification prioritizes occupant protection with features such as driver's airbags and side impact bars. The Traction Control System (TCS) further enhances stability and control, contributing to a secure driving experience on various road conditions.

Fuel efficiency is another highlight of this luxury sedan, allowing for a balanced and economical driving experience. The sedan's efficient fuel consumption figures make it an appealing option for those seeking a blend of luxury and affordability.

In the used car market, the Celsior 4.0 B specification retains its popularity among enthusiasts and collectors due to its enduring appeal and reputation for reliability. Well-maintained examples of this classic luxury sedan continue to captivate buyers seeking a touch of nostalgia and sophistication in their driving experience.

Overall, the 1992-1994 Toyota Celsior 4.0 B specification leaves a lasting impression as a classic luxury sedan with impressive specifications. From its powerful V8 engine and refined interior to its safety features and fuel efficiency, the Celsior 4.0 B specification exemplifies Toyota's dedication to delivering a premium driving experience that stands the test of time.

FAQ: 1992-1994 Toyota Celsior 4.0 B Specification - Frequently Asked Questions

Toyota Celsior Problems