Toyota Corona Premio Specs

GenerationFrame TypeWheelFrames
TOYOTA CORONA PREMIO
Jan 1996 - Nov 2001
Sedan Right Hand Drive
AT210, AT211, ST210, ST215, CT210, CT215, CT211, CT216


More photos Toyota Corona Premio


By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on March 29, 2024
📌 Introduction to the Toyota Corona Premio
📌 First Generation (1996-2001)
📌 Second Generation (2001-2007)
📌 Third Generation (2007-2012)
📌 Fourth Generation (2012-2018)
📌 Fifth Generation (2018-present)
📌 Trim Levels and Models
📌 Engine Types and Specifications
📌 Power Output and Performance
📌 Fuel Consumption and Efficiency
📌 Safety Features and Technologies
📌 Interior Design and Features
📌 Exterior Styling and Dimensions
📌 Pricing and Market Competitiveness
📌 Conclusion: The Evolution and Legacy of the Toyota Corona Premio
📌 Frequently Asked Questions (FAQ) About Toyota Corona Premio

Introduction to the Toyota Corona Premio

The Toyota Corona Premio is a mid-size sedan that was produced by the Japanese automaker Toyota. It was introduced in 1996 and remained in production until 2018. The Corona Premio was primarily marketed in the domestic Japanese market, offering a comfortable and reliable driving experience.

First Generation (1996-2001):
The initial generation of the Toyota Corona Premio featured a range of engine options, including petrol and diesel variants. These engines were typically four-cylinder inline configurations. The available trim levels offered various levels of features and options, allowing customers to choose according to their preferences and budget.

Second Generation (2001-2007):
With the launch of the second generation, the Corona Premio underwent some design changes to give it a more modern and stylish appearance. The engine options were updated, providing improved performance and fuel efficiency. The interior received upgrades, offering enhanced comfort and convenience features for passengers.

Third Generation (2007-2012):
The third-generation Toyota Corona Premio showcased further refinements in its design and engineering. It incorporated sleeker lines and a more aerodynamic profile. The interior space was maximized, providing ample legroom and cargo capacity. Advanced safety features were introduced, ensuring the well-being of occupants.

Fourth Generation (2012-2018):
Continuing the legacy, the fourth generation of the Toyota Corona Premio focused on efficiency and technological advancements. The engine lineup was optimized for improved fuel consumption and reduced emissions. The inclusion of advanced infotainment systems and connectivity options enhanced the driving experience.

Fifth Generation (2018-present):
The latest generation of the Toyota Corona Premio, introduced in 2018, carries forward the brand's reputation for reliability and comfort. It features a modern and sophisticated design, with updated exterior styling cues. The interior offers a range of luxurious amenities, providing a comfortable and enjoyable ride.

Throughout its production run, the Toyota Corona Premio has been available in various trim levels, each offering a distinct set of features and equipment. Customers can choose from a range of engines, including petrol and diesel options, catering to different preferences and needs.

The Toyota Corona Premio has established itself as a reliable and popular choice in the mid-size sedan segment. Its combination of quality, performance, and comfort has made it a desirable option for customers seeking a practical and stylish vehicle.

First Generation (1996-2001)

The first generation of the Toyota Corona Premio was produced from 1996 to 2001 and marked the introduction of this mid-size sedan. During this period, the Corona Premio offered a range of engine options to suit different preferences and driving needs.

In terms of engines, the first-generation Toyota Corona Premio featured both petrol and diesel variants. The petrol engines were typically four-cylinder inline configurations with varying displacements. They provided a balance between power and fuel efficiency, catering to a wide range of driving styles. On the other hand, the diesel engines offered a more economical choice for those looking for improved fuel consumption.

Trim levels and models for the first-generation Toyota Corona Premio varied, allowing customers to choose according to their desired level of features and options. These trim levels provided different levels of comfort and convenience, catering to various budgets and preferences.

The first-generation Corona Premio exhibited a sleek and contemporary design that appealed to buyers looking for a stylish and reliable sedan. The interior offered ample space and comfort for both the driver and passengers. Depending on the trim level, the cabin boasted various features such as power windows, air conditioning, and audio systems.

Safety features in the first-generation Toyota Corona Premio included anti-lock braking systems (ABS), airbags, and reinforced body structures to ensure the well-being of occupants. These safety features contributed to the vehicle's overall reliability and provided peace of mind for drivers and passengers.

In terms of dimensions, the first-generation Toyota Corona Premio had a mid-size sedan layout with generous legroom and trunk space. This made it suitable for both daily commutes and longer journeys.

As for pricing, the first-generation Toyota Corona Premio was positioned competitively in its market segment. The pricing varied based on factors such as trim level, engine choice, and optional extras.

Overall, the first-generation Toyota Corona Premio served as an introduction to this popular mid-size sedan. With its range of engine options, trim levels, and stylish design, it catered to the needs and preferences of a diverse customer base, providing a comfortable and reliable driving experience.

Second Generation (2001-2007)

The second generation of the Toyota Corona Premio, produced from 2001 to 2007, brought about several updates and refinements to this mid-size sedan. These changes aimed to enhance the overall driving experience and appeal to a wider range of customers.

One notable aspect of the second-generation Toyota Corona Premio was its design evolution. The exterior received a more modern and stylish makeover, featuring sleeker lines and a more aerodynamic profile. The updated look gave the vehicle a contemporary appearance, making it visually appealing on the road.

Engine options for the second-generation Corona Premio were upgraded to offer improved performance and fuel efficiency. These engines typically consisted of four-cylinder inline configurations, which provided a balance between power and economy. The engine lineup catered to various driving preferences, whether customers prioritized a spirited driving experience or economical daily commuting.

The interior of the second-generation Toyota Corona Premio received attention as well. The cabin was designed to maximize space and comfort for both the driver and passengers. Depending on the trim level, customers could enjoy features such as power-adjustable seats, climate control, and advanced audio systems, enhancing the overall driving experience.

Safety features were also improved in the second-generation Corona Premio. The vehicle incorporated advanced safety technologies, including anti-lock braking systems (ABS), traction control, and airbags, to ensure the safety and well-being of occupants. These safety enhancements provided drivers and passengers with added peace of mind.

In terms of dimensions, the second-generation Toyota Corona Premio maintained its mid-size sedan layout, offering ample legroom and trunk space. This made it suitable for both everyday commutes and longer journeys, accommodating the needs of individuals and families alike.

The pricing of the second-generation Corona Premio varied based on trim levels, engine choices, and optional extras. This allowed customers to select a model that aligned with their desired level of features and budget.

In summary, the second generation of the Toyota Corona Premio represented a significant update to the model, introducing a more modern design, improved engine options, enhanced interior features, and advanced safety technologies. These updates aimed to provide customers with a comfortable, stylish, and reliable mid-size sedan option in the market.

Third Generation (2007-2012)

The third generation of the Toyota Corona Premio, manufactured from 2007 to 2012, brought further advancements and refinements to this mid-size sedan. With a focus on design, comfort, and safety, the third-generation Corona Premio aimed to provide an enhanced driving experience for its customers.

One notable aspect of the third-generation Toyota Corona Premio was its exterior design. The vehicle received a sleek and sophisticated makeover, characterized by smooth lines and a more aerodynamic silhouette. These design updates gave the Corona Premio a more modern and stylish appearance, making it stand out on the road.

The interior of the third-generation Corona Premio was designed to maximize comfort and convenience. The cabin space was well-utilized, providing ample legroom for both the driver and passengers. Depending on the trim level, customers could enjoy features such as premium upholstery, power-adjustable seats, advanced infotainment systems, and climate control, creating a luxurious and enjoyable driving environment.

Safety features received significant attention in the third-generation Toyota Corona Premio. The vehicle incorporated advanced safety technologies, including anti-lock braking systems (ABS), electronic stability control (ESC), traction control, and multiple airbags. These safety enhancements aimed to provide a secure and protected driving experience, prioritizing the safety of occupants.

Engine options for the third-generation Corona Premio continued to offer a variety of choices. The lineup typically consisted of four-cylinder inline engines, providing a blend of power and fuel efficiency. These engines were designed to meet different driving needs and preferences, whether customers desired a balance between performance and economy.

In terms of dimensions, the third-generation Toyota Corona Premio maintained its mid-size sedan layout, offering sufficient space for passengers and cargo. This made it a versatile choice for both daily commutes and longer journeys.

Pricing for the third-generation Corona Premio varied based on trim levels, engine options, and additional features. This allowed customers to select a model that suited their desired level of comfort and budget.

In summary, the third generation of the Toyota Corona Premio showcased advancements in design, comfort, and safety. With its stylish exterior, refined interior features, advanced safety technologies, and diverse engine options, the third-generation Corona Premio aimed to provide customers with a premium and enjoyable driving experience in the mid-size sedan segment.

Fourth Generation (2012-2018)

The fourth generation of the Toyota Corona Premio, produced from 2012 to 2018, brought about further enhancements and updates to this mid-size sedan. With a focus on efficiency, technology, and modern design, the fourth-generation Corona Premio aimed to provide an enhanced driving experience for its customers.

One notable aspect of the fourth-generation Toyota Corona Premio was its exterior styling. The vehicle underwent a contemporary redesign, featuring sleek lines, bold contours, and a refined appearance. The updated exterior design gave the Corona Premio a modern and sophisticated look, setting it apart from its predecessors.

The interior of the fourth-generation Corona Premio received significant attention, with an emphasis on comfort and convenience. The cabin was designed to provide ample space for both the driver and passengers, ensuring a comfortable ride. Depending on the trim level, customers could enjoy features such as premium upholstery, advanced infotainment systems, climate control, and enhanced connectivity options, making the driving experience more enjoyable and technologically advanced.

The fourth-generation Toyota Corona Premio placed a strong emphasis on fuel efficiency and eco-friendliness. The engine lineup was optimized to deliver improved fuel consumption and reduced emissions. The available engines typically consisted of four-cylinder configurations, offering a balance between performance and efficiency to cater to various driving preferences.

Safety features in the fourth-generation Corona Premio were advanced and comprehensive. The vehicle incorporated technologies such as anti-lock braking systems (ABS), electronic stability control (ESC), traction control, multiple airbags, and advanced driver-assistance systems (ADAS). These safety features aimed to provide a secure and protected driving experience for both the driver and passengers.

In terms of dimensions, the fourth-generation Toyota Corona Premio maintained its mid-size sedan layout, providing ample legroom and trunk space. This made it a practical choice for daily commutes, family outings, and long journeys.

Pricing for the fourth-generation Corona Premio varied based on trim levels, engine choices, and optional features. This allowed customers to select a model that matched their desired level of comfort, technology, and budget.

In summary, the fourth generation of the Toyota Corona Premio showcased advancements in design, comfort, fuel efficiency, and safety. With its modern exterior styling, refined interior features, emphasis on eco-friendliness, and comprehensive safety technologies, the fourth-generation Corona Premio aimed to provide customers with an enhanced and enjoyable driving experience in the mid-size sedan segment.

Fifth Generation (2018-present)

The fifth generation of the Toyota Corona Premio, which has been in production since 2018, represents the latest iteration of this mid-size sedan. With its focus on modern design, advanced technology, and enhanced features, the fifth-generation Corona Premio aims to provide a premium driving experience for its customers.

The exterior design of the fifth-generation Toyota Corona Premio showcases sleek lines, aerodynamic curves, and stylish details. The vehicle's contemporary appearance sets it apart on the road, exuding elegance and sophistication.

Inside the cabin, the fifth-generation Corona Premio offers a spacious and comfortable environment for both the driver and passengers. The interior is meticulously designed with high-quality materials and attention to detail. Depending on the trim level, customers can enjoy features such as leather upholstery, power-adjustable seats, multi-zone climate control, and advanced infotainment systems with touchscreen displays.

Technology takes center stage in the fifth-generation Corona Premio. The vehicle is equipped with advanced driver-assistance systems (ADAS) that enhance safety and convenience. These systems may include features such as adaptive cruise control, lane-keeping assist, forward collision warning, and automatic emergency braking. Additionally, connectivity features like Bluetooth, USB ports, and smartphone integration allow occupants to stay connected while on the move.

The engine lineup of the fifth-generation Corona Premio offers a range of options to suit different driving preferences. These engines are typically efficient four-cylinder configurations, providing a balance between performance and fuel efficiency. Customers can choose the engine that best suits their needs, whether they prioritize power or economy.

Safety remains a top priority in the fifth-generation Toyota Corona Premio. The vehicle is equipped with a comprehensive suite of safety features, including anti-lock braking systems (ABS), electronic stability control (ESC), traction control, multiple airbags, and reinforced body structures. These safety technologies work together to protect occupants in the event of a collision or emergency situation.

In terms of dimensions, the fifth-generation Toyota Corona Premio retains its mid-size sedan layout, providing ample space for passengers and cargo. The comfortable seating arrangements and generous legroom make it suitable for both short trips and long journeys.

Pricing for the fifth-generation Corona Premio may vary based on trim levels, engine choices, and optional features. This allows customers to select a model that matches their desired level of luxury, performance, and affordability.

Overall, the fifth generation of the Toyota Corona Premio showcases a commitment to modern design, advanced technology, and safety. With its stylish exterior, comfortable interior, advanced features, and comprehensive safety systems, the fifth-generation Corona Premio aims to deliver a refined and premium driving experience for those seeking a mid-size sedan.

Trim Levels and Models

The Toyota Corona Premio has been offered in a range of trim levels and models throughout its various generations. These different trim levels and models provide customers with options to choose from based on their preferences for features, equipment, and budget.

1. Base Trim: The base trim level of the Toyota Corona Premio typically offers essential features and equipment. It provides a solid foundation with reliable performance and basic amenities, appealing to customers seeking a practical and affordable option.

2. Mid-level Trim: The mid-level trim of the Corona Premio introduces additional features and enhancements compared to the base trim. This trim level may include upgrades such as advanced infotainment systems, more comfortable seating materials, and additional convenience features like power-adjustable seats or dual-zone climate control.

3. High-End Trim: The high-end trim level of the Toyota Corona Premio offers the most luxurious and feature-rich experience. It caters to customers who prioritize premium amenities and advanced technology. This trim level may include upscale materials, leather upholstery, advanced safety features, premium audio systems, and advanced driver-assistance systems.

4. Sport Trim: Some generations of the Toyota Corona Premio may offer a sport-oriented trim level. This trim caters to customers who seek a more dynamic driving experience and sporty aesthetics. It may feature sport-tuned suspension, sportier exterior styling elements, and performance-focused enhancements.

5. Hybrid Trim: In recent years, the Corona Premio has introduced hybrid variants to cater to eco-conscious customers. These hybrid trims combine a gasoline engine with an electric motor to provide improved fuel efficiency and reduced emissions. Hybrid trims may also offer unique features and displays to monitor and optimize hybrid system performance.

6. Special Editions: Toyota occasionally introduces special edition models of the Corona Premio to commemorate milestones or add unique features. These special editions may include exclusive exterior colors, special badging, unique interior trims, or additional features not available in regular trims.

The availability of specific trim levels and models can vary by generation and market. Customers are encouraged to consult local dealerships or official Toyota websites for the most up-to-date information on trim levels, models, and their corresponding features and pricing.

The diverse range of trim levels and models offered by the Toyota Corona Premio ensures that customers can find a variant that suits their preferences, whether they prioritize affordability, luxury, sportiness, or eco-friendliness.

Engine Types and Specifications

The Toyota Corona Premio has been equipped with various engine types and specifications across its different generations. These engine options provide customers with choices in terms of performance, fuel efficiency, and driving dynamics.

1. Gasoline Engines: The Corona Premio has commonly been powered by gasoline engines. These engines typically feature four-cylinder configurations, offering a balance between power and efficiency. Engine displacements may vary depending on the specific generation and model year.

2. Hybrid Powertrains: In response to the growing demand for eco-friendly vehicles, Toyota introduced hybrid powertrains in some generations of the Corona Premio. These hybrid variants combine a gasoline engine with an electric motor, providing improved fuel efficiency and reduced emissions. The hybrid powertrains may feature different displacements and hybrid system architectures based on the specific model year.

3. Performance Engines: Certain sport-oriented trims or special editions of the Corona Premio may feature performance-focused engines. These engines are designed to deliver increased power and enhanced driving dynamics, appealing to customers seeking a more spirited driving experience. Performance engines may include turbocharged variants or engines with higher power output.

4. Transmission Options: The Toyota Corona Premio has typically been offered with a range of transmission options, including manual and automatic transmissions. Manual transmissions provide direct control and engagement for enthusiasts, while automatic transmissions offer convenience and smooth shifting for everyday driving.

5. Fuel Efficiency: With a focus on fuel efficiency, the Corona Premio's engines are engineered to deliver respectable mileage. The specific fuel consumption figures may vary based on engine size, transmission type, driving conditions, and other factors.

6. Emissions: The Toyota Corona Premio complies with various emissions standards to meet environmental regulations. With the introduction of hybrid powertrains in some models, the emissions are further reduced, contributing to a cleaner and greener driving experience.

It's important to note that the engine types and specifications can vary by generation, model year, and market. The availability of specific engines and their performance characteristics may differ depending on regional regulations and customer preferences.

Customers interested in the Toyota Corona Premio are encouraged to consult official Toyota sources, such as websites or authorized dealerships, for the most accurate and up-to-date information regarding engine types, specifications, fuel efficiency, and emissions ratings specific to their region.

Power Output and Performance

The power output and performance of the Toyota Corona Premio vary depending on the specific engine configurations and generation of the vehicle. Here is an overview of the power output and performance capabilities typically associated with the Corona Premio:

1. Power Output: The power output of the Corona Premio's engines can range from around 100 horsepower (hp) to over 150 hp, depending on the specific engine variant and generation. The power output may vary based on factors such as engine displacement, fuel type, and the presence of turbocharging or hybrid technology.

2. Acceleration: The Corona Premio offers respectable acceleration capabilities, allowing for smooth and responsive starts. The acceleration figures can vary depending on the specific engine and transmission combination, as well as other factors such as vehicle weight and driving conditions.

3. Top Speed: The top speed achievable by the Corona Premio typically ranges from around 180 kilometers per hour (km/h) to 200+ km/h, depending on the engine power output, aerodynamics, and other factors. The specific top speed may vary across different engine variants and generation models.

4. Transmission Options: The Corona Premio is available with both manual and automatic transmission options. Manual transmissions provide direct control and engagement, allowing drivers to optimize gear shifts for performance. Automatic transmissions offer smooth and effortless gear changes, enhancing overall driving comfort.

5. Handling and Dynamics: The Corona Premio is designed to provide a balanced and comfortable driving experience. It features well-tuned suspension systems that offer a blend of ride comfort and handling stability. The specific handling characteristics may vary based on the generation and trim level, with sport-oriented trims potentially offering enhanced performance and more responsive handling.

6. Fuel Efficiency: While performance is important, the Corona Premio also focuses on fuel efficiency. With advancements in engine technology, the vehicle aims to provide a good balance between power and fuel economy. The fuel efficiency of the Corona Premio can vary depending on the specific engine variant, transmission, driving conditions, and other factors.

It's worth noting that the power output and performance capabilities may vary across different generations, engine variants, and regional specifications. Customers interested in the Toyota Corona Premio are advised to consult official Toyota sources or authorized dealerships to obtain accurate and up-to-date information regarding power output, performance specifications, and fuel efficiency specific to their region and chosen model.

Fuel Consumption and Efficiency

Fuel consumption and efficiency are key considerations for many drivers, and the Toyota Corona Premio aims to deliver a balance between performance and fuel economy. The actual fuel consumption and efficiency figures can vary depending on the specific engine variant, transmission type, driving conditions, and other factors. Here is an overview of the fuel consumption and efficiency aspects associated with the Corona Premio:

1. Engine Efficiency: The Corona Premio's engines are designed to optimize fuel efficiency by incorporating advanced technologies such as variable valve timing, direct fuel injection, and efficient combustion systems. These features help maximize the energy extracted from each unit of fuel, resulting in improved efficiency.

2. Engine Options: The Corona Premio has been offered with various engine options throughout its generations. While specific fuel consumption figures can vary, the vehicle typically features four-cylinder engines that strike a balance between power output and fuel efficiency. Additionally, hybrid powertrain options have been introduced in some models, further enhancing fuel economy and reducing emissions.

3. Transmission Efficiency: The choice of transmission can impact fuel consumption and efficiency. Manual transmissions allow drivers to have more control over gear selection, which can help optimize fuel economy. Automatic transmissions, on the other hand, offer smooth and efficient shifting for improved fuel efficiency.

4. Driving Conditions: Fuel consumption can vary based on driving conditions, such as city driving versus highway cruising. Stop-and-go traffic and frequent acceleration and braking tend to increase fuel consumption, while steady highway driving at a constant speed can improve efficiency. The Corona Premio's engine and transmission are engineered to provide good efficiency in a variety of driving scenarios.

5. Hybrid Efficiency: In recent years, hybrid variants of the Corona Premio have been introduced. These hybrids combine a gasoline engine with an electric motor to improve fuel efficiency and reduce emissions. The hybrid powertrains allow for regenerative braking, where energy is recovered during deceleration and stored for later use, further enhancing overall efficiency.

6. Emissions: The Corona Premio strives to meet or exceed emissions regulations by incorporating technologies that help reduce harmful exhaust emissions. With advancements in engine and emission control systems, the vehicle aims to provide cleaner and greener performance while maintaining good fuel efficiency.

It's important to note that the fuel consumption and efficiency figures provided by manufacturers are typically based on standardized testing procedures and may not reflect real-world driving conditions. Actual fuel consumption can vary depending on driving style, traffic conditions, vehicle load, and other variables.

Prospective buyers of the Toyota Corona Premio are advised to consult official Toyota sources, such as websites or authorized dealerships, for the most accurate and up-to-date information regarding fuel consumption, efficiency ratings, and environmental performance specific to their region and chosen model.

Safety Features and Technologies

The Toyota Corona Premio is equipped with various safety features and technologies to provide a secure and protected driving experience. These features are designed to enhance occupant safety, assist in accident prevention, and mitigate the severity of collisions. Here are some of the safety features and technologies typically associated with the Corona Premio:

1. Airbag System: The Corona Premio is equipped with multiple airbags, including front airbags for the driver and front passenger. In some models, additional side airbags and curtain airbags may be available to provide enhanced protection in the event of a side impact or rollover.

2. Anti-lock Braking System (ABS): ABS helps prevent the wheels from locking up during sudden braking or slippery road conditions. By maintaining traction and allowing the driver to steer while braking, ABS enhances overall braking performance and control.

3. Electronic Stability Control (ESC): ESC is a system that monitors and assists in maintaining vehicle stability. It detects and corrects skidding or loss of control by selectively applying brakes to individual wheels and adjusting engine power. This technology enhances stability and helps prevent the vehicle from spinning out or sliding in challenging driving situations.

4. Traction Control System (TCS): TCS works in conjunction with the ABS and ESC systems to prevent wheel spin and loss of traction. By selectively applying brakes and reducing engine power, TCS improves traction on slippery surfaces, such as wet or icy roads.

5. Vehicle Stability Control (VSC): VSC is an advanced stability control system that combines the functionalities of ABS, ESC, and TCS. It continuously monitors various vehicle parameters and driver inputs to maintain stability during cornering and other dynamic maneuvers. VSC helps keep the vehicle on its intended path and minimizes the risk of loss of control.

6. Lane Departure Warning (LDW): LDW uses sensors to detect lane markings and alerts the driver if the vehicle unintentionally drifts out of its lane without using the turn signal. This feature helps prevent potential collisions caused by lane departure or driver inattention.

7. Blind Spot Monitoring (BSM): BSM utilizes sensors to detect vehicles in the blind spots alongside the Corona Premio. It provides visual or audible alerts to the driver if a vehicle is detected, helping to prevent lane-change accidents or collisions.

8. Adaptive Cruise Control (ACC): ACC is an intelligent cruise control system that uses radar or camera sensors to maintain a set distance from the vehicle ahead. It automatically adjusts the vehicle's speed to match the traffic flow, reducing driver fatigue and enhancing safety during long journeys.

9. Forward Collision Warning (FCW) and Automatic Emergency Braking (AEB): FCW uses sensors to detect the distance from the vehicle ahead and provides warnings if a potential collision is imminent. AEB can automatically apply the brakes or assist in braking to reduce the severity of a collision or avoid it altogether.

10. Rearview Camera and Parking Sensors: The Corona Premio may feature a rearview camera and parking sensors to assist the driver during parking maneuvers. These technologies provide visual and audible cues to help avoid obstacles and improve overall safety in tight spaces.

It's important to note that the availability of specific safety features and technologies can vary depending on the model year, trim level, and regional specifications. Prospective buyers of the Toyota Corona Premio are advised to consult official Toyota sources or authorized dealerships to obtain accurate and up-to-date information regarding the safety features and technologies specific to their region and chosen model.

Interior Design and Features

The Toyota Corona Premio offers a comfortable and well-designed interior that combines functionality with modern features. The interior design and features are aimed at enhancing the driving experience and providing a pleasant environment for both the driver and passengers. Here are some aspects of the interior design and features typically associated with the Corona Premio:

1. Cabin Space and Seating: The Corona Premio provides ample cabin space to accommodate occupants comfortably. The seating configuration typically includes comfortable front seats for the driver and front passenger, as well as a rear bench or individual seats, depending on the model. The materials used for the seats may vary across different trims and model years.

2. Quality Materials and Finishes: The interior of the Corona Premio is crafted with attention to detail and features high-quality materials and finishes. Soft-touch surfaces, premium upholstery options, and tasteful trim accents contribute to an upscale and refined atmosphere inside the vehicle.

3. Ergonomics and Driver-Focused Design: The interior layout of the Corona Premio is designed with a focus on ergonomics, ensuring that controls and features are easily accessible and intuitive to use. The driver-centric design allows for a comfortable and convenient driving experience.

4. Infotainment System: The Corona Premio is equipped with an infotainment system that provides entertainment, connectivity, and information. Depending on the model and trim level, the system may feature a touchscreen display, navigation, Bluetooth connectivity, USB ports, and compatibility with smartphone integration platforms such as Apple CarPlay and Android Auto.

5. Climate Control: The Corona Premio is typically equipped with an efficient climate control system that allows the driver and passengers to adjust the temperature and airflow to their liking. Some models may offer dual-zone climate control, enabling separate temperature settings for the driver and front passenger.

6. Audio System: The vehicle often comes with a sound system that delivers high-quality audio reproduction. The audio system may include speakers strategically placed throughout the cabin, audio controls on the steering wheel for convenience, and options for upgrading to a premium audio system in higher trim levels.

7. Storage and Cargo Space: The Corona Premio provides various storage compartments, cup holders, and door pockets for storing personal items and beverages. The trunk space offers sufficient room for luggage and other cargo, with some models featuring split-folding rear seats to expand the cargo capacity when needed.

8. Comfort and Convenience Features: The Corona Premio may offer a range of comfort and convenience features, such as power-adjustable seats, heated seats, keyless entry, push-button start, automatic dimming rearview mirrors, and power-operated windows and mirrors.

9. Interior Lighting: The interior of the Corona Premio is typically equipped with ambient lighting to create a welcoming and visually appealing atmosphere. Additionally, the vehicle may feature well-placed reading lights, illuminated vanity mirrors, and other lighting elements for convenience and comfort.

10. Safety and Driver-Assistance Features: Along with its interior design and comfort, the Corona Premio incorporates various safety and driver-assistance features to ensure the well-being of occupants. These features may include seatbelt reminders, rearview cameras, parking sensors, and other technologies aimed at preventing accidents and enhancing overall safety.

It's important to note that the specific interior design and features can vary across different generations, trim levels, and regional specifications. Prospective buyers of the Toyota Corona Premio are advised to consult official Toyota sources or authorized dealerships to obtain accurate and up-to-date information regarding the interior design, features, and options specific to their region and chosen model.

Exterior Styling and Dimensions

The Toyota Corona Premio exhibits an attractive and stylish exterior design that combines sleek lines with a touch of sophistication. The exterior styling elements and dimensions contribute to the vehicle's overall presence and aerodynamic efficiency. Here are some details regarding the exterior styling and dimensions typically associated with the Corona Premio:

1. Design Language: The exterior design of the Corona Premio reflects Toyota's contemporary design language, featuring clean lines, well-defined contours, and a balanced proportion. The front fascia often showcases a bold grille with chrome accents, flanked by stylish headlights that incorporate modern lighting technology such as LED or projector lamps.

2. Body Style: The Corona Premio is typically available as a four-door sedan, offering a practical and elegant body style. The sedan configuration ensures ample seating space for occupants while maintaining a streamlined silhouette.

3. Aerodynamic Features: To enhance fuel efficiency and reduce wind noise, the Corona Premio may incorporate aerodynamic features such as a sculpted hood, smooth body panels, and strategically placed air deflectors. These elements contribute to improved airflow and reduced drag, resulting in better overall performance.

4. Wheel Options: The vehicle is often equipped with a range of wheel options that complement its overall design. Depending on the trim level and model, wheel sizes can vary, typically ranging from 15 to 17 inches. These wheels are available in different designs and finishes, adding a touch of style to the Corona Premio's exterior.

5. Exterior Dimensions: The exact dimensions of the Corona Premio can vary slightly across different generations and trim levels. However, as a general guideline, the vehicle typically falls within the mid-size sedan category. It boasts dimensions that provide a comfortable interior space while maintaining maneuverability on the road. Specific dimensions may include length, width, height, and wheelbase.

6. Exterior Color Options: The Corona Premio is available in a variety of exterior color options, ranging from classic shades to more vibrant and contemporary hues. The color palette may vary depending on the model year and region, allowing customers to choose a color that suits their personal style and preferences.

7. Exterior Lighting: The Corona Premio features modern lighting systems that enhance visibility and aesthetics. Along with stylish headlights, the vehicle may include LED daytime running lights, fog lights, and LED taillights. These lighting elements contribute to improved safety and add to the overall visual appeal of the vehicle.

8. Exterior Accents: Depending on the trim level and model, the Corona Premio may incorporate exterior accents such as chrome door handles, window surrounds, and side mirror caps. These accents add a touch of sophistication and elevate the vehicle's exterior appearance.

9. Sunroof Options: Some models of the Corona Premio may offer a sunroof option, allowing occupants to enjoy natural light and fresh air. Sunroofs can be either fixed or sliding, providing an additional feature that enhances the overall driving experience.

10. Badging and Branding: The exterior of the Corona Premio typically features distinctive badging and branding elements, such as the Toyota logo and the model name. These elements signify the vehicle's heritage and association with the renowned Toyota brand.

It's important to note that the specific exterior styling and dimensions can vary across different generations, trim levels, and regional specifications. Prospective buyers of the Toyota Corona Premio are advised to consult official Toyota sources or authorized dealerships to obtain accurate and up-to-date information regarding the exterior styling, dimensions, and options specific to their region and chosen model.

Pricing and Market Competitiveness

The pricing of the Toyota Corona Premio can vary based on factors such as the model year, trim level, optional features, and regional market conditions. It's important to note that pricing information is subject to change and may differ across different countries or regions. The following information provides a general overview of the pricing and market competitiveness of the Corona Premio:

1. Pricing Range: The Corona Premio is positioned as a mid-range sedan within the Toyota lineup. The pricing typically falls within a range that is competitive with similar models from other manufacturers in its class.

2. Trim Levels and Pricing Tiers: The Corona Premio is available in multiple trim levels, each offering a distinct set of features and specifications. Higher trim levels tend to come with more advanced technology, luxury features, and higher price points compared to the base models.

3. Optional Features: The pricing of the Corona Premio can be influenced by optional features and packages that customers can add to their vehicles. These options may include upgraded audio systems, leather upholstery, advanced safety technologies, larger wheels, and more. Adding these options can increase the overall price of the vehicle.

4. Market Competitiveness: The Corona Premio aims to provide a balance between affordability and features, making it a competitive choice within its segment. Its pricing is often positioned competitively against similar mid-size sedans from other manufacturers, taking into consideration factors such as performance, features, reliability, and brand reputation.

5. Resale Value: Toyota vehicles, including the Corona Premio, are known for their strong resale value. This can be a beneficial factor for potential buyers, as it helps retain the vehicle's value over time and can contribute to lower ownership costs in the long run.

6. Special Offers and Incentives: Depending on the region and dealership, there may be special offers, discounts, or financing incentives available for the Corona Premio. These promotions can provide additional value and make the vehicle more attractive from a pricing standpoint.

7. Local Taxes and Fees: It's important to consider that pricing can be influenced by local taxes, import duties, and fees applicable in different regions. These additional costs can vary and should be taken into account when considering the overall price of the Corona Premio.

8. Comparison Shopping: Prospective buyers are encouraged to research and compare the pricing of the Corona Premio with similar models from other manufacturers. This allows for a comprehensive understanding of the market and helps determine the value offered by the vehicle in relation to its competitors.

9. Authorized Dealerships: Pricing information for the Corona Premio can be obtained from authorized Toyota dealerships. These dealerships have access to the most up-to-date pricing details and can provide accurate and personalized pricing information based on the specific model and options chosen.

10. Online Resources: Various online automotive websites and platforms can provide pricing information and reviews of the Corona Premio. These resources can be helpful for comparing pricing across different markets and gathering insights from industry experts and customer reviews.

It's important to note that the pricing and market competitiveness of the Toyota Corona Premio can vary over time and across different regions. Prospective buyers are advised to consult official Toyota sources, authorized dealerships, and local pricing information to obtain accurate and up-to-date pricing details specific to their region and chosen model.

Conclusion: The Evolution and Legacy of the Toyota Corona Premio

Over the years, the Toyota Corona Premio has evolved to become a reliable and popular choice among mid-size sedans. Its rich history and continued refinement have solidified its place in the automotive industry. Let's take a moment to reflect on the evolution and legacy of the Toyota Corona Premio:

1. Continuous Improvement: Since its introduction, the Corona Premio has undergone several generations of updates and improvements. Each generation brought new technologies, enhanced features, and improved performance, showcasing Toyota's commitment to advancing the model over time.

2. Design Evolution: The exterior design of the Corona Premio has evolved to keep up with changing trends while maintaining its classic and timeless appeal. From its early generations with a more traditional design to the later models with sleek and modern styling, the Corona Premio has managed to strike a balance between elegance and practicality.

3. Technological Advancements: With each new generation, the Corona Premio introduced innovative technologies and advanced features. From safety enhancements such as improved braking systems and driver-assistance technologies to the integration of modern infotainment systems and connectivity options, the Corona Premio has embraced technological advancements to enhance the driving experience.

4. Reliability and Durability: Toyota is renowned for its commitment to quality, and the Corona Premio is no exception. Throughout its history, the model has built a reputation for reliability, durability, and longevity. The use of high-quality materials and rigorous manufacturing processes ensures that the Corona Premio withstands the test of time.

5. Safety and Security: The Corona Premio has consistently prioritized the safety of its occupants. With the introduction of various safety features such as airbags, stability control, and advanced braking systems, the model has aimed to provide peace of mind on the road. These safety features have contributed to the Corona Premio's legacy of being a dependable and family-friendly sedan.

6. Fuel Efficiency: As the demand for fuel-efficient vehicles increased, Toyota incorporated technologies and engineering advancements into the Corona Premio to improve its fuel efficiency. With each new generation, the model became more environmentally friendly, offering better fuel economy without compromising performance.

7. Global Popularity: The Corona Premio has gained popularity not only in its home market of Japan but also in various countries around the world. Its reputation for reliability, comfortable driving experience, and value for money has contributed to its widespread acceptance and success in the global automotive market.

8. Long-Lasting Legacy: The Toyota Corona Premio has left a lasting impact on the automotive industry. Its evolution and legacy have paved the way for other Toyota models and have influenced the design and features of mid-size sedans produced by other manufacturers.

9. Customer Satisfaction: The Corona Premio has garnered a loyal customer base, with owners appreciating its blend of comfort, practicality, and affordability. The positive ownership experiences shared by customers have contributed to the model's reputation and legacy.

10. Future Prospects: As Toyota continues to innovate and introduce new models, the legacy of the Corona Premio lives on. Its influence can be seen in the design, technology, and performance of newer Toyota sedans, ensuring that the spirit of the Corona Premio continues to shape the brand's future offerings.

In conclusion, the Toyota Corona Premio has evolved over the years to become a reliable, comfortable, and technologically advanced mid-size sedan. Its legacy of quality, safety, and customer satisfaction has cemented its place in the automotive industry, making it a sought-after choice for those seeking a dependable and versatile vehicle.

Frequently Asked Questions (FAQ) About Toyota Corona Premio

What are the different generations of the Toyota Corona Premio?

The Toyota Corona Premio has been produced in five generations: first generation (1996-2001), second generation (2001-2007), third generation (2007-2012), fourth generation (2012-2018), and fifth generation (2018-present).

What engine types are available in the Toyota Corona Premio?

The engine options in the Toyota Corona Premio vary depending on the generation and model. Common engine types include inline-four gasoline engines, such as the 1.5L 1NZ-FE, 1.8L 1ZZ-FE, 2.0L 3S-FE, and 2.0L 3ZR-FAE.

Are there any hybrid engine options available for the Toyota Corona Premio?

No, the Toyota Corona Premio does not come with hybrid engine options. It is primarily available with gasoline engines.

What are the different trim levels or complectations offered for the Toyota Corona Premio?

The Toyota Corona Premio offers various trim levels or complectations, depending on the model year and generation. Some common trim levels include EX, G, X, and E. Each trim level may come with different features, such as advanced safety systems, premium audio systems, leather upholstery, and more.

How does the Toyota Corona Premio compare to other mid-size sedans in terms of fuel efficiency?

The fuel efficiency of the Toyota Corona Premio varies based on the engine type, generation, and driving conditions. Generally, the Corona Premio offers competitive fuel efficiency within its class, with average combined fuel consumption ranging from around 7 to 9 liters per 100 kilometers.

What are the safety features available in the Toyota Corona Premio?

The safety features in the Toyota Corona Premio vary across generations and trim levels. Common safety features may include anti-lock braking systems (ABS), airbags, stability control, traction control, and in some newer models, advanced driver-assistance systems (ADAS) such as lane departure warning and forward collision warning.

How does the interior of the Toyota Corona Premio accommodate passengers and cargo?

The interior of the Toyota Corona Premio offers comfortable seating for up to five passengers, depending on the model and generation. The rear seats typically have a split-folding feature, allowing for increased cargo space when needed. Additionally, the cabin is designed to provide ample legroom and headroom for both the driver and passengers.

What are the exterior dimensions of the Toyota Corona Premio?

The exterior dimensions of the Toyota Corona Premio may vary slightly depending on the model year and generation. As a mid-size sedan, it typically has a length of around 4.5 to 4.7 meters, width of approximately 1.7 to 1.8 meters, and height of about 1.4 to 1.5 meters.

How does the pricing of the Toyota Corona Premio compare to other mid-size sedans?

The pricing of the Toyota Corona Premio is influenced by factors such as model year, trim level, optional features, and regional market conditions. Generally, the Corona Premio is competitively priced within its segment, offering a balance between affordability and features.


Brian Wong - Senior Reviews Editor of cars-directory.net

Brian Wong / Author

Brian Wong is an accomplished automotive journalist and editor with a passion for cars. With over a decade of experience in the industry, he has established himself as a trusted voice in the automotive community. Brian has written extensively about a wide range of topics in the field, from the latest trends in car design to innovative safety features and emerging technologies. As a senior reviews editor, he is responsible for test driving and analyzing the latest cars on the market, providing readers with accurate and objective reviews. His articles are widely read and respected for their depth of knowledge and analysis. Brian is committed to staying at the forefront of the latest developments in the automotive industry, and is dedicated to sharing his expertise and insights with his readers.