2002 Toyota Crown 2.0 standard Specs

OVERVIEW

With a curb weight of 3516 lbs (1595 kg), the Toyota Crown 2.0 standard has a 4 cylinder engine, a Natural gas engine 3Y-PE. This engine 3Y-PE produces a maximum power of 80 PS (79 bhp - 58.9 kW) at 4400 rpm and a maximum torque of 159.8 Nm (117.8 lb.ft - 16.3 kg.m) at 2400 rpm. The engine power is transmitted to the road by the rear wheel drive (FR) with a 4AT gearbox. For stopping power, the Toyota Crown 2.0 standard braking system includes drum at the rear and V disk at the front. Stock tire sizes are 175/80 on 14 inch rims at the rear and 175/80 on 14 inch rims at the front. Chassis details - Toyota Crown 2.0 standard has trailing link axle type rear suspension and strut front suspension for road holding and ride confort.

Add to compare list

- Present
- Option
- Not Present (or Dealer Option)

• Search Car Specs
• Other Crown Specs Database

More photos Toyota Crown

By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on April 24, 2024

Introduction

The 2002-2004 Toyota Crown 2.0 standard captures an era of sophistication and performance in the automotive landscape. This model, produced from October 2002 to May 2004, presents a harmonious blend of design, engineering, and comfort. As a part of the ninth generation Crown series (TA-YXS10 frame name), this sedan boasts a distinctive rear-wheel-drive setup, ensuring an engaging driving experience.

With a refined 4-speed automatic transmission and a 1998 cm3 engine, the Toyota Crown 2.0 standard radiates power and efficiency. The 4-cylinder engine, denoted by the engine code 3Y-PE, generates a maximum power output of 80 PS at 4400 rpm, coupled with a torque of 159.8 Nm at 2400 rpm. This engine configuration aligns with the model's commitment to balanced performance and responsive handling.

While performance is pivotal, the Toyota Crown 2.0 standard extends its appeal with thoughtfully crafted dimensions. Its exterior showcases an understated elegance, spanning 469.5 cm in length, 169.5 cm in width, and 151.5 cm in height. The wheelbase stretches 278.5 cm, fostering stability and ride quality. The interior complements the exterior, providing a spacious haven that measures 206 cm in length, 145.5 cm in width, and 122.5 cm in height.

The 2002-2004 Toyota Crown 2.0 standard stands as a 4-door sedan, designed to accommodate up to 5 passengers. Its minimal turning circle of 5.1 meters contributes to maneuverability, and the ride height of 16.5 cm assures practicality. As for safety, the inclusion of a driver's airbag and ABS reflects the model's commitment to safeguarding its occupants.

Throughout its production, the Toyota Crown 2.0 standard maintains its legacy of class and comfort. Its suspension system employs a strut setup in the front and a trailing link axle in the rear, harmonizing with its sporty yet composed driving dynamics. Noteworthy options, such as front fog lamps and winter complectation, further accentuate its versatility.

In summary, the 2002-2004 Toyota Crown 2.0 standard embodies a blend of performance, elegance, and engineering prowess. From its responsive powertrain to its carefully designed dimensions, this model stands as a testament to Toyota's dedication to crafting vehicles that transcend mere transportation.

Model Overview

The 2002-2004 Toyota Crown 2.0 standard emerges as a distinguished representation of Toyota's commitment to quality and innovation. Nestled within the ninth generation of Crown models, this iteration radiates a blend of refinement and performance that echoes the brand's legacy.

Positioned as a rear-wheel-drive sedan, the Toyota Crown 2.0 standard offers an engaging driving experience. Its FR (front-engine, rear-wheel-drive) configuration contributes to its dynamic handling and balanced weight distribution. This model boasts a 4-speed automatic transmission, adding convenience and efficiency to its driving dynamics.

The heart of the Toyota Crown 2.0 standard lies in its 1998 cm3 engine. This 4-cylinder powerplant bears the engine code 3Y-PE, underscoring its engineering pedigree. With a power output of 80 PS and a torque of 159.8 Nm, the engine delivers a satisfying blend of performance and fuel efficiency.

The exterior dimensions of this model reflect a harmonious synthesis of style and practicality. Its length of 469.5 cm, width of 169.5 cm, and height of 151.5 cm combine to create an alluring presence that doesn't compromise on interior space. Inside, a well-thought-out cabin offers dimensions that prioritize both comfort and functionality.

Safety and comfort remain paramount in the Toyota Crown 2.0 standard. While it accommodates up to five passengers, its intelligently designed interior ensures that each occupant enjoys ample room. The inclusion of features like driver's airbag and ABS underscores Toyota's commitment to occupant protection.

In terms of suspension, the Toyota Crown 2.0 standard employs a front strut setup and a trailing link axle in the rear, striking a balance between sportiness and ride comfort. This model's commitment to driver engagement is enhanced by its FR layout, contributing to a responsive and enjoyable driving experience.

In conclusion, the 2002-2004 Toyota Crown 2.0 standard embodies the essence of Toyota's dedication to excellence. With its carefully crafted design, well-engineered powertrain, and thoughtful features, it stands as a testament to Toyota's prowess in creating vehicles that excel in both form and function.

Generational Context

Within the automotive landscape, the 2002-2004 Toyota Crown 2.0 standard occupies a significant place in the evolutionary timeline of the Toyota Crown series. This particular model hails from the ninth generation of Toyota Crown vehicles, known by the frame name TA-YXS10. Spanning from October 2002 to May 2004, this iteration encapsulates the automotive trends and technological advancements of its era.

As part of the ninth generation, the 2002-2004 Toyota Crown 2.0 standard inherits a legacy of refinement and innovation. Over the years, the Crown series has consistently aimed to strike a harmonious balance between performance, comfort, and cutting-edge features. Each successive generation builds upon the foundation set by its predecessors, often incorporating technological advancements and design refinements.

The ninth generation of Toyota Crown models witnessed a meticulous attention to detail in both exterior and interior design. The exterior dimensions of the 2002-2004 Toyota Crown 2.0 standard reflect a conscious effort to provide a compelling blend of aesthetics and practicality. These dimensions not only contribute to the car's visual appeal but also impact its interior space and overall driving dynamics.

Engine technology also evolved within the context of the ninth generation. The 2002-2004 Toyota Crown 2.0 standard is powered by a 1998 cm3 engine that marries power and efficiency. This engine's specifications align with the era's emphasis on performance optimization and fuel economy.

In terms of safety and convenience, the ninth-generation Toyota Crown models were equipped with features that catered to the evolving needs of drivers and passengers. While embodying the core values of the Crown series, the 2002-2004 Toyota Crown 2.0 standard integrated safety technologies that reflected the period's advancements.

In summary, the 2002-2004 Toyota Crown 2.0 standard stands as a testament to Toyota's dedication to evolution and improvement. Placed within the context of the ninth generation, it inherits the legacy of its predecessors while embodying the spirit of innovation that defines the Toyota Crown series.

Engine Specifications

The 2002-2004 Toyota Crown 2.0 standard derives its power from an intricately engineered 1998 cm3 engine, designated by the engine code 3Y-PE. This 4-cylinder powerplant embodies Toyota's commitment to delivering a harmonious blend of performance, efficiency, and reliability.

At its core, this engine is crafted to generate a maximum power output of 80 PS at 4400 rpm, accompanied by a torque of 159.8 Nm at 2400 rpm. This power and torque delivery is tailored to provide responsive acceleration and steady performance across a variety of driving conditions.

The engineering of the 3Y-PE engine aligns with the period's emphasis on optimizing fuel efficiency. This approach doesn't just benefit the driver's wallet but also contributes to a more environmentally conscious driving experience. The engine's 4-cylinder configuration and technological enhancements work in tandem to deliver a balance of power and fuel economy.

Within the context of the 2002-2004 Toyota Crown 2.0 standard, the 3Y-PE engine serves as the beating heart that propels the vehicle. Whether navigating city streets or embarking on highway journeys, this engine is poised to deliver a smooth and capable performance that aligns with Toyota's reputation for quality and innovation.

As a part of the engine's specifications, its displacement of 1998 cm3 highlights the optimization of internal combustion dynamics, contributing to power delivery and overall efficiency. This level of engineering precision showcases Toyota's commitment to creating vehicles that not only meet but exceed the expectations of drivers and enthusiasts alike.

In essence, the 2002-2004 Toyota Crown 2.0 standard's engine specifications encapsulate the marriage of technology, performance, and efficiency. Rooted in the 3Y-PE engine, this model stands as a testament to Toyota's dedication to crafting vehicles that encapsulate the brand's ethos of innovation and excellence.

Performance Metrics

The 2002-2004 Toyota Crown 2.0 standard possesses a performance profile that harmonizes power and efficiency, resulting in a driving experience that satisfies both the senses and practical needs. Equipped with a 1998 cm3 engine, the model's performance metrics reflect its commitment to delivering a balanced blend of power and fuel economy.

With its 4-cylinder 3Y-PE engine under the hood, the Toyota Crown 2.0 standard generates a maximum power output of 80 PS at 4400 rpm, while the torque of 159.8 Nm at 2400 rpm ensures responsive acceleration and steady performance across various driving scenarios. This powertrain configuration strikes a chord between the demands of urban commutes and open-road journeys.

The 4-speed automatic transmission enhances the vehicle's driving dynamics by providing seamless gear changes that contribute to the overall smoothness of the ride. The synergy between the engine and transmission results in a responsive and controlled driving experience, allowing drivers to confidently navigate through diverse road conditions.

In terms of performance metrics, the Toyota Crown 2.0 standard offers a harmonious balance between power and efficiency. The emphasis on a 4-cylinder engine and a responsive torque curve ensures that the vehicle accelerates confidently when needed while promoting economical fuel consumption during everyday driving.

The model's FR (front-engine, rear-wheel-drive) configuration further contributes to its performance attributes. By distributing the vehicle's weight predominantly over the rear wheels, the Toyota Crown 2.0 standard achieves improved traction during acceleration, enhancing its responsiveness and driving dynamics.

In essence, the 2002-2004 Toyota Crown 2.0 standard's performance metrics underscore its ability to provide a gratifying driving experience without compromising on fuel efficiency. By weaving together power, torque, transmission responsiveness, and a rear-wheel-drive setup, this model stands as a testament to Toyota's pursuit of performance excellence.

Fuel Efficiency

The 2002-2004 Toyota Crown 2.0 standard exemplifies Toyota's dedication to creating vehicles that balance performance with fuel efficiency. With its 1998 cm3 3Y-PE engine and 4-speed automatic transmission, this model is engineered to deliver economical fuel consumption without compromising on power.

The 4-cylinder engine's meticulous design and optimization prioritize efficient combustion, resulting in commendable fuel efficiency figures. This engineering approach aligns with the era's emphasis on minimizing the environmental impact of vehicles while providing drivers with an economical choice for daily commuting and longer journeys.

The 2002-2004 Toyota Crown 2.0 standard's fuel efficiency is a testament to its well-engineered powertrain and transmission. The harmonious interaction between these components ensures that the engine operates at its most efficient points, thereby optimizing fuel consumption.

While exact figures may vary based on driving conditions, the Toyota Crown 2.0 standard's commitment to fuel efficiency extends beyond its powertrain. The model's aerodynamic design and thoughtfully selected features contribute to its overall efficiency, allowing drivers to make the most of every drop of fuel.

In an era where environmental considerations and economic sensibilities intersect, the 2002-2004 Toyota Crown 2.0 standard presents itself as an ideal option for those seeking a balance between performance and fuel efficiency. Its engineering excellence and dedication to minimizing fuel consumption align with Toyota's commitment to creating vehicles that resonate with both drivers and the world around them.

Dimensions and Sizes

The 2002-2004 Toyota Crown 2.0 standard embraces design and functionality through its carefully considered dimensions and sizes. From its exterior to its interior, every aspect is meticulously crafted to provide a balance of style and practicality.

The exterior dimensions of the Toyota Crown 2.0 standard present an inviting yet commanding presence on the road. With an exterior length of 469.5 cm, width of 169.5 cm, and height of 151.5 cm, this model strikes a harmonious balance between a spacious interior and a sleek profile. These dimensions not only enhance its aesthetic appeal but also contribute to its overall stability and road presence.

Step inside the Toyota Crown 2.0 standard, and you're greeted with interior dimensions that prioritize both comfort and functionality. With an interior length of 206 cm, width of 145.5 cm, and height of 122.5 cm, the cabin offers ample room for both driver and passengers. This well-thought-out interior ensures that occupants can enjoy the journey with plenty of space to relax.

The Toyota Crown 2.0 standard's wheelbase measures 278.5 cm, a dimension that influences both its stability and ride quality. The length of the front and rear axles, measuring 145.5 cm and 140 cm respectively, contributes to its dynamic handling characteristics.

Additionally, the ride height or ground clearance of 16.5 cm strikes a balance between maneuverability and practicality, making it well-suited for a variety of road conditions. With its weight of 1320 kg, the Toyota Crown 2.0 standard embodies a design that optimizes performance and efficiency.

In summary, the 2002-2004 Toyota Crown 2.0 standard's dimensions and sizes are carefully orchestrated to create a harmonious balance between aesthetics and functionality. From its exterior profile to its interior space, every detail is thoughtfully designed to enhance the driving experience and provide occupants with a comfortable and inviting cabin.

Wheel Configuration

The 2002-2004 Toyota Crown 2.0 standard's wheel configuration forms a crucial part of its overall performance and driving dynamics. This model's wheel setup is meticulously designed to complement its rear-wheel-drive (FR) layout and deliver a balanced and engaging driving experience.

The Toyota Crown 2.0 standard boasts a wheelbase measuring 278.5 cm, a dimension that plays a pivotal role in determining its stability and handling characteristics. The placement of the wheels contributes to a well-balanced weight distribution, promoting confident road manners and responsiveness.

With a front axle length of 145.5 cm and a rear axle length of 140 cm, the Toyota Crown 2.0 standard achieves a harmonious alignment that further enhances its driving dynamics. This configuration enables precise steering control and contributes to the model's overall agility.

The choice of tires and rims is another aspect that defines the Toyota Crown 2.0 standard's wheel configuration. The front and rear tires measure 175/80 R14, emphasizing the model's blend of comfort and control. The wheel configuration ensures that the Toyota Crown 2.0 standard delivers a reassuring connection between the driver and the road.

The focus on wheel configuration extends beyond aesthetics. By harmonizing wheel dimensions, axle lengths, and tire specifications, the 2002-2004 Toyota Crown 2.0 standard's wheel setup reinforces its commitment to delivering a driving experience that balances performance, stability, and control. This thoughtful configuration aligns with Toyota's pursuit of engineering excellence and driver satisfaction.

Fuel Tank Capacity

The 2002-2004 Toyota Crown 2.0 standard's fuel tank capacity is a significant consideration in its overall practicality and convenience. The size of the fuel tank is meticulously designed to strike a balance between sufficient range and efficient refueling.

While the exact fuel tank capacity may vary, this model's capacity is tailored to accommodate longer journeys without necessitating frequent stops for refueling. The thoughtful selection of fuel tank capacity reflects Toyota's commitment to creating vehicles that cater to both daily commutes and extended trips.

The fuel tank capacity complements the Toyota Crown 2.0 standard's focus on fuel efficiency. With a 1998 cm3 engine and a 4-speed automatic transmission, this model is engineered to optimize fuel consumption and provide drivers with an economical option for their transportation needs.

The synergy between the fuel tank capacity and the vehicle's powertrain contributes to the overall driving experience. By ensuring that the model can cover substantial distances on a single tank of fuel, Toyota aims to enhance driver convenience and reduce the frequency of refueling stops.

In summary, the 2002-2004 Toyota Crown 2.0 standard's fuel tank capacity is a crucial aspect of its design that complements its focus on efficiency and practicality. This well-considered capacity underscores Toyota's commitment to providing drivers with vehicles that deliver both performance and convenience.

Conclusion

In the realm of automotive engineering, the 2002-2004 Toyota Crown 2.0 standard stands as a testament to Toyota's unwavering commitment to excellence. This model encapsulates an era of meticulous craftsmanship, innovative engineering, and a deep understanding of driver preferences.

From its performance metrics to its fuel efficiency, the Toyota Crown 2.0 standard weaves together a tapestry of attributes that cater to the modern driver's demands. The well-engineered 1998 cm3 engine, coupled with a 4-speed automatic transmission, delivers a driving experience that marries power with precision. This powertrain configuration is a testament to Toyota's pursuit of both spirited performance and economical operation.

The model's dimensions and sizes, carefully orchestrated to provide ample space and stability, reflect a meticulous attention to detail. The thoughtfully designed wheel configuration further enhances its handling dynamics and responsiveness, amplifying the joy of driving.

In terms of fuel efficiency, the Toyota Crown 2.0 standard shines as a beacon of practicality in an era where environmental considerations are paramount. The vehicle's fuel tank capacity is calibrated to offer a generous range, aligning with Toyota's dedication to delivering both convenience and efficiency to drivers.

As the curtain falls on the 2002-2004 Toyota Crown 2.0 standard, it leaves an indelible mark on the automotive landscape. Its engineering prowess, refined design, and dedication to providing an exceptional driving experience make it a worthy representative of the Toyota Crown lineage. This model's legacy endures as a testament to Toyota's ability to craft vehicles that resonate with drivers, no matter the era.

Frequently Asked Questions (FAQ) about the 2002-2004 Toyota Crown 2.0 standard