2001 Toyota Crown 2.0 standard Specs

OVERVIEW

With a curb weight of 3615 lbs (1640 kg), the Toyota Crown 2.0 standard has a 4 cylinder engine, a Natural gas engine 3Y-PE. This engine 3Y-PE produces a maximum power of 80 PS (79 bhp - 58.9 kW) at 4400 rpm and a maximum torque of 159.8 Nm (117.8 lb.ft - 16.3 kg.m) at 2400 rpm. The engine power is transmitted to the road by the rear wheel drive (FR) with a 4MT gearbox. For stopping power, the Toyota Crown 2.0 standard braking system includes drum at the rear and V disk at the front. Stock tire sizes are 175/80 on 14 inch rims at the rear and 175/80 on 14 inch rims at the front. Chassis details - Toyota Crown 2.0 standard has trailing link axle type rear suspension and strut front suspension for road holding and ride confort.

Add to compare list

- Present
- Option
- Not Present (or Dealer Option)

• Search Car Specs
• Other Crown Specs Database

More photos Toyota Crown

By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on April 24, 2024

Introduction to the 2001-2002 Toyota Crown 2.0 Standard

The 2001-2002 Toyota Crown 2.0 Standard is a luxury sedan that was produced from August 2001 to September 2002. With its elegant design and reliable performance, it quickly gained popularity among car enthusiasts. This model comes with a Front-Engine, Rear-Wheel-Drive (FR) configuration, providing a balanced and responsive driving experience.

Under the hood, the Toyota Crown 2.0 Standard is equipped with a capable 1998 cm3 (121.9 cu-in) engine, identified by the code 3Y-PE. This 4-cylinder engine delivers a maximum power output of 80 PS (79 bhp) or 58 kW at 4400 rpm, along with a maximum torque of 159.8 Nm (117.8 lb.ft) or 16.3 kg.m at 2400 rpm. The engine's design complies with the 2000 emission regulation, ensuring a 25% reduction in emissions, making it environmentally friendly.

When it comes to size and dimensions, the Toyota Crown 2.0 Standard offers ample space for passengers and cargo. The exterior length measures 469.5 cm (184.84 inches), while the width is 169.5 cm (66.73 inches), and the height stands at 151.5 cm (59.64 inches). The wheelbase spans 278.5 cm (109.64 inches), providing stability and smooth handling on the road.

Inside the cabin, the Toyota Crown 2.0 Standard can comfortably accommodate up to 6 passengers, with 2 seat rows available. The interior length measures 206 cm (81.1 inches), providing ample legroom for both front and rear passengers. The interior width is 145.5 cm (57.28 inches), and the interior height is 122.5 cm (48.22 inches), ensuring a spacious and comfortable interior environment.

This luxury sedan comes with a standard 4-speed manual transmission gearbox, providing smooth gear changes and better control over the vehicle. The front suspension features a strut design, while the rear suspension utilizes a trailing link axle type, contributing to a well-balanced and stable ride.

Safety features include an optional driver's airbag, ABS (Anti-lock Braking System), and brake assist. The standard front fog lamps enhance visibility in adverse weather conditions. Additionally, the Toyota Crown 2.0 Standard boasts a robust and reliable construction, weighing in at 1310 kg (2888 lbs) with a curb weight of 1640 kg (3615 lbs).

With its classic design, powerful engine, and comfortable interior, the 2001-2002 Toyota Crown 2.0 Standard remains a sought-after choice for those seeking a blend of luxury and performance in a sedan.

Overview of the Toyota Crown 2.0 Standard Model Years

The 2001-2002 Toyota Crown 2.0 Standard represents a notable era in the history of the Toyota Crown series, showcasing a harmonious blend of elegance and performance. As a luxury sedan, it captivated the automotive market with its timeless design and reliable engineering.

During the production period of August 2001 to September 2002, the Toyota Crown 2.0 Standard was available in various markets worldwide. This model year featured a Front-Engine, Rear-Wheel-Drive (FR) drivetrain configuration, providing a dynamic and engaging driving experience.

Under the hood, the Toyota Crown 2.0 Standard was equipped with a powerful 4-cylinder engine boasting a displacement of 1998 cm3 (121.9 cu-in). This engine, identified by the code 3Y-PE, delivered an impressive maximum power output of 80 PS (79 bhp) or 58 kW at 4400 rpm, with a maximum torque of 159.8 Nm (117.8 lb.ft) or 16.3 kg.m at 2400 rpm. The engine's design adhered to the 2000 emission regulation, showcasing Toyota's commitment to environmental sustainability.

The exterior dimensions of the Toyota Crown 2.0 Standard were carefully crafted to offer a balanced and spacious design. With an exterior length of 469.5 cm (184.84 inches), width of 169.5 cm (66.73 inches), and height of 151.5 cm (59.64 inches), it exuded a commanding presence on the road. The wheelbase measured 278.5 cm (109.64 inches), contributing to stable handling and a smooth ride.

Inside the cabin, the Toyota Crown 2.0 Standard catered to the comfort and convenience of its occupants. With a seating capacity for up to 6 passengers distributed across 2 seat rows, it provided ample space for everyone. The interior length measured 206 cm (81.1 inches), ensuring sufficient legroom for both front and rear passengers. The interior width was 145.5 cm (57.28 inches), while the interior height stood at 122.5 cm (48.22 inches), resulting in a roomy and inviting interior environment.

The 2001-2002 Toyota Crown 2.0 Standard offered a standard 4-speed manual transmission gearbox, providing precise gear shifts and enhanced control over the vehicle's performance. The front suspension utilized a strut design, while the rear suspension featured a trailing link axle type, contributing to a smooth and stable ride on various road conditions.

Safety features included an optional driver's airbag, ABS (Anti-lock Braking System), and brake assist, enhancing occupant protection. The standard front fog lamps further improved visibility during adverse weather conditions.

With its attractive design, impressive engine performance, and comfortable interior, the 2001-2002 Toyota Crown 2.0 Standard solidified its position as a luxurious and reliable sedan, appealing to discerning drivers seeking a balance of sophistication and functionality.

Engine Specifications: Powering the 2001-2002 Toyota Crown

The heart of the 2001-2002 Toyota Crown 2.0 Standard lies in its capable and efficient engine, which powers this luxury sedan with confidence and finesse. The model was equipped with a robust 4-cylinder engine, denoted by the engine code 3Y-PE.

With a displacement of 1998 cm3 (121.9 cu-in), the 3Y-PE engine demonstrated Toyota's commitment to engineering excellence. It delivered an impressive maximum power output of 80 PS (79 bhp) or 58 kW at 4400 rpm, making it more than capable of handling daily commutes and longer journeys with ease. Additionally, the engine's design adhered to the 2000 emission regulation, boasting a 25% reduction in emissions, showcasing Toyota's dedication to environmental responsibility.

Furthermore, the 3Y-PE engine produced a maximum torque of 159.8 Nm (117.8 lb.ft) or 16.3 kg.m at 2400 rpm, ensuring ample low-end torque for smooth acceleration and efficient performance on the road.

The engine's design was characterized by its 4-cylinder configuration, which offered a balance of power and fuel efficiency. The 3Y-PE engine was paired with a standard 4-speed manual transmission gearbox, providing precise gear shifts and control over the vehicle's performance.

Fueling the Toyota Crown 2.0 Standard was a seamless process, as it ran on natural gas, showcasing Toyota's commitment to alternative fuel options and environmental sustainability.

With its impressive engine specifications, the 2001-2002 Toyota Crown 2.0 Standard proved to be a reliable and efficient choice for drivers seeking a luxury sedan that delivered both power and eco-consciousness.

Fuel Tank Capacity: How Much Can It Hold?

The 2001-2002 Toyota Crown 2.0 Standard boasts a practical fuel tank capacity that allows for extended journeys with fewer refueling stops. This luxury sedan comes with a fuel tank capacity that ensures drivers can travel significant distances before needing to visit a gas station.

Thanks to its efficient design and engineering, the exact fuel tank capacity of the Toyota Crown 2.0 Standard allows it to hold a substantial amount of fuel, providing a balance between fuel economy and driving convenience.

The generous fuel tank capacity of the 2001-2002 Toyota Crown 2.0 Standard enables drivers to enjoy long drives without worrying about frequent stops for refueling. Whether cruising on highways or navigating city streets, the ample fuel tank capacity ensures that drivers can cover considerable distances between fill-ups, adding to the convenience and enjoyment of driving this luxury sedan.

Toyota's commitment to engineering excellence and efficient performance is evident in the fuel tank capacity of the 2001-2002 Toyota Crown 2.0 Standard, making it an ideal choice for those seeking a reliable and fuel-efficient luxury sedan for their daily commutes or long journeys.

Fuel Consumption: Understanding the Efficiency

The 2001-2002 Toyota Crown 2.0 Standard showcases impressive fuel efficiency, making it a practical and economical choice for drivers. With its efficient design and engineering, this luxury sedan optimizes fuel consumption to deliver a smooth and economical driving experience.

The fuel efficiency of the Toyota Crown 2.0 Standard is a result of Toyota's commitment to innovation and eco-consciousness. The 4-cylinder engine, with its 1998 cm3 (121.9 cu-in) displacement and advanced technology, ensures that fuel is used efficiently, minimizing unnecessary waste.

The aerodynamic exterior design of the Toyota Crown 2.0 Standard also contributes to its fuel efficiency by reducing drag and optimizing airflow, which helps improve overall performance and fuel consumption.

Drivers of the 2001-2002 Toyota Crown 2.0 Standard can enjoy extended journeys without worrying about frequent visits to the gas station. Whether commuting in the city or embarking on long highway drives, the fuel-efficient nature of this luxury sedan offers both convenience and savings at the pump.

Toyota's dedication to engineering excellence and sustainable driving is evident in the fuel consumption of the 2001-2002 Toyota Crown 2.0 Standard, making it a smart choice for those seeking a balance of performance and fuel efficiency in their daily drives.

Fuel Average: Calculating the MPG (Miles Per Gallon)

The 2001-2002 Toyota Crown 2.0 Standard offers a respectable fuel average, allowing drivers to gauge their fuel consumption in miles per gallon (MPG). The MPG metric is commonly used to measure the efficiency of vehicles, providing valuable information for budget-conscious drivers and those concerned with environmental impact.

Calculating the MPG for the Toyota Crown 2.0 Standard involves dividing the distance traveled in miles by the amount of fuel consumed in gallons during that journey. This calculation offers valuable insights into the vehicle's fuel efficiency and helps drivers make informed decisions about their driving habits.

Thanks to its efficient 4-cylinder engine and aerodynamic design, the Toyota Crown 2.0 Standard achieves a competitive MPG rating, making it a practical and economical choice for daily commutes and longer trips.

The fuel average of the 2001-2002 Toyota Crown 2.0 Standard can vary depending on various factors, such as driving habits, road conditions, and vehicle maintenance. By adopting fuel-efficient driving techniques and keeping the car well-maintained, drivers can further optimize the MPG and reduce their overall fuel expenses.

Toyota's dedication to engineering excellence and eco-consciousness is evident in the fuel average of the 2001-2002 Toyota Crown 2.0 Standard, offering a harmonious balance between performance and fuel efficiency for drivers seeking a reliable and economical luxury sedan.

Dimensions and Sizes: Exterior and Interior Measurements

The 2001-2002 Toyota Crown 2.0 Standard boasts well-balanced dimensions, both exterior and interior, offering ample space for passengers and a commanding presence on the road.

Starting with the exterior measurements, the Toyota Crown 2.0 Standard has an exterior length of 469.5 cm (184.84 inches), an exterior width of 169.5 cm (66.73 inches), and an exterior height of 151.5 cm (59.64 inches). These dimensions contribute to the sedan's elegant and sophisticated appearance while ensuring it remains practical for everyday driving and parking.

The wheelbase of the Toyota Crown 2.0 Standard measures 278.5 cm (109.64 inches), providing a stable and comfortable ride for passengers. Additionally, the front axle length is 145.5 cm (57.28 inches), while the rear axle length is 140 cm (55.11 inches), further enhancing the car's stability and overall balance on the road.

Moving to the interior measurements, the Toyota Crown 2.0 Standard offers a spacious and comfortable cabin. The interior length measures 206 cm (81.1 inches), providing ample legroom for both front and rear passengers. The interior width is 145.5 cm (57.28 inches), while the interior height stands at 122.5 cm (48.22 inches), ensuring a roomy and inviting interior environment for occupants.

The sedan comes with two seat rows, accommodating up to six passengers, making it an excellent choice for families and those who often travel with companions. The 2001-2002 Toyota Crown 2.0 Standard ensures a comfortable and enjoyable journey for all occupants, thanks to its thoughtfully designed interior dimensions.

With its well-proportioned exterior and generous interior measurements, the Toyota Crown 2.0 Standard strikes a perfect balance between luxury, practicality, and comfort, making it a popular choice among drivers seeking a spacious and stylish sedan for their daily drives.

Wheel Options: Exploring the Choices for the Crown

The 2001-2002 Toyota Crown 2.0 Standard offers a variety of wheel options, allowing drivers to personalize their sedan according to their preferences and style.

The wheel choices for the Toyota Crown 2.0 Standard are designed to complement the sedan's elegant exterior and enhance its overall appearance. These wheels come in different sizes and designs, catering to a wide range of tastes.

Drivers can select from various wheel sizes and rim dimensions, ensuring that the Toyota Crown 2.0 Standard can be equipped with wheels that align with their desired aesthetics and performance needs.

Toyota's attention to detail extends to the wheel options, as each set is carefully crafted to meet the brand's high standards of quality and durability. Whether opting for a classic design or a more contemporary look, the wheel options for the 2001-2002 Toyota Crown 2.0 Standard add a touch of individuality to this luxury sedan.

In addition to the various wheel designs, Toyota also offers different tire options to further tailor the driving experience of the Toyota Crown 2.0 Standard. These tires are designed to provide optimal traction and handling, contributing to a smooth and comfortable ride.

By offering a diverse range of wheel options, Toyota ensures that drivers can find the perfect match for their Toyota Crown 2.0 Standard, allowing them to make a statement and express their unique sense of style while enjoying the luxurious driving experience the sedan provides.

Trim Levels: Different Variants of the 2001-2002 Toyota Crown

The 2001-2002 Toyota Crown 2.0 Standard was offered in different trim levels, each catering to specific preferences and needs of drivers. These trim levels presented a range of features and options, allowing buyers to select the variant that best suited their requirements and budget.

Each trim level of the Toyota Crown 2.0 Standard boasted the same reliable and efficient 4-cylinder engine, ensuring consistent performance across the lineup. However, the variations in features and amenities set the different trim levels apart, offering unique driving experiences to customers.

The base trim of the Toyota Crown 2.0 Standard provided essential features that met the fundamental needs of drivers, making it a practical choice for those seeking a straightforward and reliable sedan.

As drivers moved up to higher trim levels, they were treated to additional comfort and convenience features, enhancing the overall driving experience. These features might include upgraded upholstery materials, advanced infotainment systems, and driver-assistance technologies, among others.

Moreover, the higher trim levels of the 2001-2002 Toyota Crown 2.0 Standard might have offered more luxurious interior appointments, showcasing Toyota's commitment to craftsmanship and attention to detail.

The availability of trim levels might have varied depending on the regional market, as Toyota often tailors its offerings to meet the preferences and demands of specific regions.

By offering different trim levels, Toyota catered to a diverse range of customers, ensuring that everyone could find a Toyota Crown 2.0 Standard that suited their lifestyle and preferences. Whether seeking a basic and economical option or a more feature-rich and luxurious experience, the different trim levels provided something for every driver in the 2001-2002 Toyota Crown 2.0 Standard lineup.

Generations of the Toyota Crown: Evolution Over Time

The 2001-2002 Toyota Crown 2.0 Standard belongs to a long and illustrious lineage of the Toyota Crown series, representing a specific generation in the evolution of this iconic luxury sedan.

The Toyota Crown has a rich history that dates back to 1955 when it was first introduced. Over the years, it has undergone multiple generations, with each new iteration building upon the successes and innovations of its predecessors.

With each generation, the Toyota Crown has seen significant advancements in design, technology, and engineering, reflecting the ever-changing demands and tastes of the automotive market. Toyota's commitment to continuous improvement and innovation is evident in the evolution of the Toyota Crown series.

The 2001-2002 Toyota Crown 2.0 Standard, as part of a particular generation, showcases the culmination of years of refinement and engineering excellence. During this era, Toyota may have focused on optimizing performance, fuel efficiency, safety features, and interior comfort to cater to the evolving needs of drivers.

Throughout the various generations of the Toyota Crown, the sedan has earned a reputation for its reliability, comfort, and timeless design. Each new generation sought to push the boundaries of automotive technology and luxury, solidifying the Toyota Crown's position as a leader in the luxury sedan segment.

The Toyota Crown's consistent success over the years can be attributed to Toyota's unwavering dedication to quality, craftsmanship, and attention to detail. By continuously adapting and innovating, the Toyota Crown has remained a favorite among drivers seeking a combination of sophistication and performance in a luxury sedan.

As the 2001-2002 Toyota Crown 2.0 Standard represents a specific generation within the series, it showcases Toyota's commitment to creating a vehicle that appeals to the discerning tastes of its customers while remaining true to the core values of the Toyota Crown lineage.

Conclusion: The 2001-2002 Toyota Crown 2.0 Standard in Review

The 2001-2002 Toyota Crown 2.0 Standard offers a compelling package of elegance, performance, and efficiency, making it a sought-after choice among luxury sedans. As part of the Toyota Crown series, it continues the legacy of Toyota's commitment to excellence and innovation.

Under the hood, the 2001-2002 Toyota Crown 2.0 Standard boasts a reliable and efficient 4-cylinder engine, delivering a balance of power and fuel economy. The sedan's performance is complemented by a Front-Engine, Rear-Wheel-Drive (FR) configuration, providing a dynamic and engaging driving experience.

The dimensions and sizes of the Toyota Crown 2.0 Standard ensure ample space for passengers and cargo, while the well-crafted exterior design exudes sophistication and class. Inside the cabin, occupants are treated to a comfortable and roomy environment, further enhancing the driving experience.

Toyota's dedication to safety is evident in the inclusion of features like ABS (Anti-lock Braking System), brake assist, and optional driver's airbag. These safety measures prioritize the well-being of both drivers and passengers.

The 2001-2002 Toyota Crown 2.0 Standard also demonstrates Toyota's commitment to environmental sustainability, with its compliance with the 2000 emission regulation, resulting in a 25% reduction in emissions.

As part of the Toyota Crown series, the 2001-2002 Toyota Crown 2.0 Standard continues the tradition of offering various trim levels, providing choices for drivers seeking different levels of luxury and convenience.

In summary, the 2001-2002 Toyota Crown 2.0 Standard presents a well-rounded package, appealing to drivers who prioritize performance, comfort, and style in their luxury sedan. Its reliability, efficiency, and timeless design continue to captivate drivers and make it a standout choice in the luxury sedan market.

FAQ: Frequently Asked Questions about the 2001-2002 Toyota Crown 2.0 Standard