2003 Toyota Harrier 3.0 300G 4WD Specs


OVERVIEW

With a fuel consumption of 22.1 mpg US - 26.6 mpg UK - 10.6 L/100km, a curb weight of 4486 lbs (2035 kg), the Toyota Harrier 3.0 300G 4WD has a V-type 6 cylinder DOHC engine, a High octane premium gasoline engine 1MZ-FE. This engine 1MZ-FE produces a maximum power of 223 PS (220 bhp - 164 kW) at 5800 rpm and a maximum torque of 304 Nm (224.2 lb.ft - 31 kg.m) at 4400 rpm. The engine power is transmitted to the road by the four wheel drive (4WD) with a 5AT gearbox. For stopping power, the Toyota Harrier 3.0 300G 4WD braking system includes disk brake at the rear and V disk at the front. Stock tire sizes are 225/65 on 17 inch rims at the rear and 225/65 on 17 inch rims at the front. Chassis details - Toyota Harrier 3.0 300G 4WD has strut rear suspension and strut front suspension for road holding and ride confort.

Add to compare list

GENERAL INFORMATION
Period of ProductionFeb 2003 - Dec 2003
Drive Wheels - Traction - Drivetrain4WD
Transmission Gearbox - Number of Speeds5AT
Engine Size - Displacement - Engine Capacity2994 cm3 or 182.7 cu-in
Frame NameUA-MCU35W
Gearbox Modestandard

TOYOTA HARRIER 3.0 300G 4WD SIZE, DIMENSIONS AND WEIGHT
Exterior Length473 cm or 186.22 inches
Exterior Width184.5 cm or 72.63 inches
Exterior Height168 cm or 66.14 inches
Exterior Size (L x W x H)473x184.5x168 cm or 186.22x72.63x66.14 inches
Interior Length199 cm or 78.34 inches
Interior Width150 cm or 59.05 inches
Interior Height121 cm or 47.63 inches
Interior Size (L x W x H)199x150x121 cm or 78.34x59.05x47.63 inches
Wheelbase271.5 cm or 106.88 inches
Front Axle Length157.5 cm or 62 inches
Rear Axle Length156 cm or 61.41 inches
Ride Height - Ground Clearance18.5 cm or 7.28 inches
Weight1760 kg or 3880 lbs
Num. of Seats5
Num. of Doors5
Minimum Turning Circle - Turning Diameter, m5.7
Fuel Tank Capacity19 US gallons
15.8 UK gallons
72 L
Curb Weight2035 kg or 4486 lbs
Seat Rows2
Front/Rear Axis Length157.5/156 cm or 62/61.41 inches

TOYOTA HARRIER 3.0 300G 4WD ENGINE TECHNICAL DATA
Engine Code1MZ-FE
Maximum Power - Output - Horsepower223 PS or 220 bhp or 164 kW
Maximum Power RPM5800 rpm
Maximum Power Output223 PS or 220 bhp or 162 kW @ 5800 rpm
Maximum Torque304 Nm or 224.2 lb.ft or 31 kg.m
Maximum Torque RPM4400 rpm
Maximum Torque Output304 Nm or 224.2 lb.ft or 31 kg.m @ 4400 rpm
Engine Type - Number of CylindersV-type 6 cylinder DOHC
Fuel TypeHigh octane premium gasoline
Fuel Consumption (10/15 mode)22.1 mpg US
26.6 mpg UK
10.6 L/100km
Variable Cylinder Management - VCMNo
Ecological Type2000 emission regulation 75% reduction

TOYOTA HARRIER 3.0 300G 4WD SUSPENSION
Front Brakes - Disc DimensionsV disk
Rear Brakes - Disс Dimensionsdisk brake
Front Suspensionstrut
Rear Suspensionstrut
Front Tyres - Rims Dimensions225/65 R17
Rear Tyres - Rims Dimensions225/65 R17
Aluminium DiskStandart
4WS - Four-Wheel SteeringNo
Variable Gear Ratio Steering - VGS/VGRSNo
Sport-Tuned SuspensionNo
Low Down SuspensionNo

TOYOTA HARRIER 3.0 300G 4WD EXTERIOR
SunroofOption
Front SpoilerNo
Rear SpoilerStandart
Xenon LampsNo
Front Fog LampsStandart
Rear Fog LampsOption
Ultraviolet Glass ProtectionStandart
Roof RailNo
Big SunroofNo
T Bar RoofNo
Roof EquipmentNo
Targa RoofNo
Hard TopNo
Soft Topno
Canvas Topno
Metal Top-
Magnesium WheelsNo
Side Sliding DoorNo
Sliding DoorsNo
Sliding Electric DoorNo
Sliding Electric DoorsNo
Door Easy CloserNo
Power Rear DoorNo
Head Lights WasherNo
Privacy GlassStandart
Winter ComplectationOption

TOYOTA HARRIER 3.0 300G 4WD INTERIOR
Power WindowStandart
Power SteeringStandart
Keyless EnterStandart
Cruise ControlNo
Leather SeatNo
Power Adjustable SeatsNo
Front Seat HeaterNo
Power Ajustable Front SeatNo
Removable SeatsNo
Shifter Positioninstrument panel
Steering Locatonright
Steereing Gear Typerack & pinion type with power assist
Ottoman SeatNo
Front Bench SeatNo
Full Flat Seats-
Seat Position MemoryNo
Seat LifterNo
Adjustable 3rd RowNo
Walk Throught-
2nd Row Throught-
2nd Rowseparate folding
3nd Row-
Lagage BoxStandart
Engine Start ButtonNo
EtcNo
Bucket SeatNo

TOYOTA HARRIER 3.0 300G 4WD SAFETY
Drivers AirbagStandart
Passengers AirbagStandart
Side AirbagOption
ABSABS with EBD ( standard )
Break AssistStandart
Parking RadarOption
Curtain AirbagsOption
2 AirbagsNo
Front MonitorOption
Sides MonitorsOption
Back MonitorOption
Active HeadrestNo
Start Stop SystemNo
Run Flat TiresNo
Air SuspensionNo
Brakes Equipmentno
Collision Mitigation SystemNo
Night VisionNo
Lane Keep AssistNo
Distance Control SystemNo
SonarNo
Cenral Diff LockNo
ESCStandart
Traction ControlStandart
Down Hill AssistNo
AYCNo
SH-4WDNo
Isofix BarStandart
Build-in Child SeatNo
Autocorrected MirrorsNo
Rain SensorNo
Intelligent AFSNo
Alarm SystemStandart
Security AlarmNo
Road Service-

AMENITY
Air Conditionerautoair conditioning(standard)
Air PurifierNo
RadioStandart
Autoreverse CasetteNo
CD PlayerStandart
MD PalyerNo
Navigation SystemDVD navigation (option)
Mesomorphic Monitoranalog TV tuner (option)
Traffic Jam Assist-
Audio HDDNo
DVD-audioNo
Additional Sound Equipment-
Rear Entertainment SystemNo
SpeakerStandart
AC PlugNo
Stearing Wheel HeaterNo
Rear Seats HeaterNo
HumidifierNo
Air FilterStandart
Antibacterial FilterNo
Оdor AbsorberNo
DehumidifierNo
Intelligent Parking AssistNo
Optional Navigation SystemNo

OTHER
LSDNo


- Present
- Option
- Not Present (or Dealer Option)



More photos Toyota Harrier


By Brian Wong, Reviewed by: Kurt Niebuhr, Updated on March 29, 2024
πŸ“Œ Structure: Introduction
πŸ“Œ Key Specifications of the 2003 Toyota Harrier 3.0 300G 4WD
πŸ“Œ Engine Details and Performance
πŸ“Œ Fuel Efficiency and Consumption
πŸ“Œ Fuel Tank Capacity and Range
πŸ“Œ Exploring the Dimensions and Sizes
πŸ“Œ Wheel Options and Tire Varieties
πŸ“Œ Unveiling the MPG (Miles Per Gallon) Ratings
πŸ“Œ Understanding Fuel Capacity and Consumption
πŸ“Œ Delving into Fuel Averages and Efficiency
πŸ“Œ Lesser-Known Insights: Engine Specifications
πŸ“Œ Analyzing Fuel Economy and Consumption
πŸ“Œ Uncommonly Discussed: Wheel Configurations
πŸ“Œ Fuel-Related Factors: Dimensions and MPG
πŸ“Œ Summarizing Facts: Harrier 3.0 300G 4WD's Attributes
πŸ“Œ Conclusion
πŸ“Œ Frequently Asked Questions (FAQ) About the Toyota Harrier 3.0 300G 4WD

Structure: 1. Introduction

The 2003 Toyota Harrier 3.0 300G 4WD stands as a remarkable testament to Toyota's commitment to crafting vehicles of exceptional quality and innovation. This mid-size crossover SUV emerged during the period of production from February to December 2003, offering drivers a blend of robust performance, versatile features, and a distinct sense of style.

Equipped with a 3.0-liter V6 gasoline engine under the hood, the Harrier 3.0 300G 4WD showcases its engineering prowess. The drivetrain's 4WD configuration ensures adept traction across various terrains, contributing to a confident driving experience.

The 5-speed automatic transmission further enhances the driving dynamics, providing smooth gear transitions for effortless acceleration. The engine's 2994 cm³ displacement showcases Toyota's dedication to engineering excellence.

Beyond its powertrain, the Harrier's exterior dimensions convey a sense of modernity and practicality. With an exterior length of 473 cm, width of 184.5 cm, and height of 168 cm, the SUV strikes a harmonious balance between size and agility. Inside, the cabin offers comfort and spaciousness, with dimensions catering to passengers' relaxation and convenience.

The intelligently designed interior features include power windows, power steering, and keyless entry. The vehicle accommodates five seats within its two rows, ensuring ample space for occupants. The safety aspect is not overlooked, with airbags and ABS among the standard safety features.

For those who value technology, the Harrier 3.0 300G 4WD provides options like a sunroof, front fog lamps, and privacy glass. These features are designed to enhance driving enjoyment and comfort.

Underpinning its performance is the engine code 1MZ-FE, capable of generating 223 PS of power and 304 Nm of torque. This harmonious power-to-torque ratio contributes to the SUV's versatile capabilities on the road.

As an emblem of Toyota's commitment to quality, the 2003 Harrier 3.0 300G 4WD embodies a fusion of engineering precision and thoughtful design. With its captivating presence, robust powertrain, and array of features, the Harrier stands as a compelling choice in the mid-size SUV segment.

This vehicle showcases Toyota's dedication to creating automobiles that embody a blend of innovation, style, and performance.

Key Specifications of the 2003 Toyota Harrier 3.0 300G 4WD

The 2003 Toyota Harrier 3.0 300G 4WD is a distinguished crossover SUV that embodies a range of key specifications defining its capabilities and attributes. Crafted to excel in performance and comfort, this model showcases Toyota's dedication to engineering excellence.

With a production span from February to December 2003, the Harrier 3.0 300G 4WD is a product of meticulous design and engineering. Its 4WD drivetrain ensures confident traction, enabling the vehicle to tackle various road conditions with ease. The harmonious integration of a 5-speed automatic transmission enhances the SUV's dynamic performance.

At the heart of the Harrier lies a robust 3.0-liter V6 gasoline engine, reflecting Toyota's commitment to powerful yet efficient drivetrains. The engine's 2994 cm³ displacement underscores its capacity to deliver a rewarding driving experience.

The exterior dimensions of the Harrier are thoughtfully designed to strike a balance between size and maneuverability. Its exterior length of 473 cm, width of 184.5 cm, and height of 168 cm contribute to a well-proportioned appearance that exudes modernity and practicality.

Inside, the cabin accommodates passengers with comfort and spaciousness. A thoughtful layout ensures convenience, while the SUV's two-row seating arrangement provides ample space for up to five occupants. Safety is a priority, evidenced by the inclusion of airbags and ABS among its standard features.

Underpinning the Harrier's performance is the engine code 1MZ-FE, which translates to 223 PS of power and 304 Nm of torque. This powertrain configuration signifies Toyota's commitment to engineering harmony between performance and efficiency.

The 2003 Harrier 3.0 300G 4WD is a testament to Toyota's dedication to crafting vehicles that excel in both form and function. Its captivating design, robust powertrain, and array of features underscore its position as a standout choice in the competitive SUV landscape.

The vehicle's specifications reflect Toyota's commitment to delivering vehicles that offer a harmonious blend of innovation, style, and driving dynamics.

Engine Details and Performance

At the heart of the 2003 Toyota Harrier 3.0 300G 4WD lies a sophisticated engine that encapsulates power, performance, and efficiency. This V6 powerhouse, with the engine code 1MZ-FE, serves as a testament to Toyota's commitment to delivering an exceptional driving experience.

Boasting a displacement of 2994 cm³, the engine's capacity showcases Toyota's dedication to engineering excellence. The 1MZ-FE is a V-type 6 cylinder DOHC configuration, designed to strike a balance between power and refinement.

Generating a maximum power output of 223 PS (220 bhp or 164 kW) at 5800 rpm, the 1MZ-FE engine delivers vigorous performance across various driving scenarios. Its power characteristics are complemented by a maximum torque of 304 Nm (224.2 lb.ft or 31 kg.m) at 4400 rpm, contributing to responsive acceleration and confident overtaking maneuvers.

The engine's high-octane premium gasoline fuel type underscores its performance-oriented design. The Toyota Harrier's engine showcases an innovative approach, adhering to ecological standards set by the 2000 emission regulation with a 75% reduction in emissions.

The engine's prowess is paired with a standard 5-speed automatic transmission, ensuring smooth gear changes and effortless power delivery. This combination harmonizes with the 4WD drivetrain, allowing the Harrier 3.0 300G 4WD to handle various road conditions with confidence.

In terms of fuel efficiency, the Harrier demonstrates impressive figures. Its fuel consumption, as per the 10/15 mode test, stands at 22.1 mpg US (26.6 mpg UK or 10.6 L/100km), a testament to Toyota's commitment to engineering vehicles that strike a balance between performance and economy.

In summary, the 2003 Toyota Harrier 3.0 300G 4WD's engine is a pinnacle of engineering, combining power, performance, and efficiency. Toyota's meticulous attention to detail and commitment to innovation shine through, resulting in an engine that elevates the driving experience to new heights.

Fuel Efficiency and Consumption

The 2003 Toyota Harrier 3.0 300G 4WD combines power with an eye for efficiency, showcasing Toyota's dedication to delivering vehicles that excel in both performance and fuel economy. With its innovative design and engineering, this model manages to strike a harmonious balance between spirited driving and responsible fuel consumption.

The Harrier's fuel efficiency and consumption statistics make it an appealing choice for those who seek to minimize their environmental footprint without compromising on performance. The vehicle's 3.0-liter V6 gasoline engine, identified by the engine code 1MZ-FE, delivers a maximum power output of 223 PS and a peak torque of 304 Nm.

The high-octane premium gasoline fuel type used by the engine showcases Toyota's commitment to extracting the best possible performance while adhering to modern ecological standards. The engine's efficiency is further enhanced by its V-type 6 cylinder DOHC configuration.

When it comes to fuel consumption, the Harrier's performance on the road is translated into impressive figures. According to the 10/15 mode test, the SUV achieves a fuel consumption rate of 22.1 mpg US (26.6 mpg UK or 10.6 L/100km), a testament to Toyota's engineering prowess in optimizing fuel efficiency.

This exceptional fuel economy is achieved without compromising the vehicle's performance capabilities. The 1MZ-FE engine's design, coupled with the 5-speed automatic transmission and 4WD drivetrain, allows the Harrier to offer a driving experience that is both dynamic and eco-conscious.

In conclusion, the 2003 Toyota Harrier 3.0 300G 4WD stands as a prime example of Toyota's commitment to producing vehicles that excel in both power and fuel efficiency. By blending cutting-edge technology with innovative engineering, Toyota has crafted a vehicle that offers a rewarding driving experience while minimizing its impact on the environment.

Fuel Tank Capacity and Range

The 2003 Toyota Harrier 3.0 300G 4WD is equipped with a fuel system that balances capacity and efficiency, ensuring a satisfying range for drivers seeking extended journeys without frequent refueling stops. The SUV's fuel tank capacity, coupled with its fuel-efficient performance, allows for a commendable range that aligns with Toyota's commitment to practicality and convenience.

The Harrier's fuel tank boasts a capacity of 19 US gallons (15.8 UK gallons or 72 L), a design consideration that complements the vehicle's V6 engine and its associated power requirements. This capacity strikes a balance between offering drivers a substantial fuel reserve while maintaining efficient fuel consumption.

When considering the fuel consumption figures of the Harrier, its fuel tank capacity translates into a noteworthy driving range. With an average fuel consumption rate of 22.1 mpg US (26.6 mpg UK or 10.6 L/100km), the SUV can cover an impressive distance before needing a refueling stop. This enhances the vehicle's suitability for long drives and road trips, where a balance between efficiency and practicality is crucial.

In real-world driving scenarios, the Harrier's fuel efficiency, coupled with its generous fuel tank capacity, equips drivers with the confidence to embark on journeys with fewer interruptions. This is particularly advantageous when traveling through remote areas where fuel stations may be scarce.

In essence, the 2003 Toyota Harrier 3.0 300G 4WD's fuel tank capacity and range demonstrate Toyota's keen understanding of drivers' needs. By combining a sizable fuel tank with an efficient powertrain, Toyota has crafted a vehicle that seamlessly blends convenience, efficiency, and practicality to enhance the overall driving experience.

Exploring the Dimensions and Sizes

The 2003 Toyota Harrier 3.0 300G 4WD stands as a testament to the harmonious fusion of spaciousness and sleek design. Its thoughtfully proportioned dimensions cater to both aesthetics and practicality, making it an appealing choice for drivers seeking a mid-size crossover SUV that effortlessly balances form and function.

From an exterior perspective, the Harrier's dimensions showcase a balance between size and maneuverability. With an exterior length of 473 cm, a width of 184.5 cm, and a height of 168 cm, the SUV exudes a modern and refined presence on the road. These dimensions not only contribute to its aesthetic appeal but also enhance its ability to navigate various urban and suburban environments.

Moving inside, the Harrier's interior dimensions emphasize comfort and passenger convenience. With an interior length of 199 cm, a width of 150 cm, and a height of 121 cm, the cabin provides occupants with ample space to relax and enjoy the journey. The two-row seating configuration accommodates up to five passengers, offering generous legroom and headroom for a comfortable ride.

The vehicle's wheelbase measures 271.5 cm, contributing to its stability and road presence. The front axle length of 157.5 cm and rear axle length of 156 cm further enhance its balance and handling characteristics. A ride height of 18.5 cm ensures sufficient ground clearance for traversing various terrains.

The SUV's curb weight of 1760 kg adds to its solid and composed demeanor on the road, while the curb weight of 2035 kg underscores its robust build and engineering. With a seating capacity of five passengers and five doors for easy access, the Harrier combines practicality with style.

In summary, the 2003 Toyota Harrier 3.0 300G 4WD's dimensions epitomize a careful consideration of space and design. Whether on the exterior or within the cabin, these dimensions underscore Toyota's commitment to crafting vehicles that resonate with both drivers' preferences and the demands of modern driving environments.

Wheel Options and Tire Varieties

The 2003 Toyota Harrier 3.0 300G 4WD offers a meticulous selection of wheel options and tire varieties, enhancing both its aesthetics and performance capabilities. Toyota's attention to detail is evident in the range of options available, ensuring that drivers can tailor their Harrier to suit their preferences while optimizing the driving experience.

The Harrier's wheel options encompass a blend of practicality and style. The front and rear tires, each sized at 225/65 R17, contribute to the SUV's road presence and balanced performance. These tires are thoughtfully paired with 17-inch rims, further enhancing the vehicle's aesthetic appeal.

The aluminum disk wheels stand as a standard feature, showcasing Toyota's commitment to utilizing high-quality materials in its design and engineering. While magnesium wheels are not part of the standard configuration, the aluminum wheels ensure a balance between durability, performance, and visual appeal.

The choice of tire size and wheel design has been meticulously considered to provide a harmonious driving experience. The tire dimensions and wheel type contribute to the Harrier's stability on the road, its handling characteristics, and its overall aesthetic appeal.

In conclusion, the 2003 Toyota Harrier 3.0 300G 4WD's wheel options and tire varieties showcase Toyota's dedication to crafting vehicles that excel in both performance and style. Whether on city streets or open highways, the careful selection of tire dimensions and wheel designs contributes to an enhanced driving experience that aligns with Toyota's commitment to engineering excellence.

Unveiling the MPG (Miles Per Gallon) Ratings

The 2003 Toyota Harrier 3.0 300G 4WD stands as a testament to Toyota's dedication to engineering vehicles that blend performance and efficiency. A key indicator of this balance is the vehicle's MPG (Miles Per Gallon) ratings, which provide valuable insights into its fuel economy and its ability to cover distances without excessive fuel consumption.

The Harrier's MPG ratings reflect Toyota's commitment to optimizing the vehicle's powertrain for efficiency. In the 10/15 mode test, the SUV achieves an impressive fuel consumption rate of 22.1 mpg US (26.6 mpg UK or 10.6 L/100km). This figure underscores the vehicle's ability to cover substantial distances on a single tank of fuel.

These MPG ratings encompass a variety of driving conditions, providing a holistic view of the vehicle's efficiency across both city and highway scenarios. This comprehensive approach aligns with Toyota's aim to ensure that the Harrier's fuel economy remains consistently efficient, regardless of the driving environment.

The Harrier's 3.0-liter V6 gasoline engine, coupled with its 5-speed automatic transmission and 4WD drivetrain, contributes to these impressive MPG ratings. By optimizing the powertrain's performance characteristics and its fuel consumption, Toyota has crafted a vehicle that provides a satisfying driving experience while maintaining responsible fuel usage.

In summary, the 2003 Toyota Harrier 3.0 300G 4WD's MPG ratings exemplify Toyota's dedication to engineering vehicles that offer a harmonious blend of power and efficiency. The vehicle's ability to cover distances while consuming fuel responsibly underscores Toyota's commitment to delivering vehicles that cater to both drivers' preferences and the demands of modern driving.

Understanding Fuel Capacity and Consumption

Understanding the fuel capacity and consumption of the 2003 Toyota Harrier 3.0 300G 4WD provides valuable insights into the vehicle's practicality and efficiency. These aspects play a pivotal role in determining the vehicle's suitability for different driving scenarios and its ability to meet the demands of modern motorists.

The Harrier's fuel capacity, set at 19 US gallons (15.8 UK gallons or 72 L), aligns with Toyota's commitment to providing a balanced fuel reserve. This capacity strikes a harmonious balance between offering drivers an ample fuel supply for extended journeys and maintaining a weight that doesn't compromise the vehicle's efficiency.

When considering fuel consumption, the 10/15 mode test results provide a comprehensive view of the Harrier's efficiency. The SUV achieves a fuel consumption rate of 22.1 mpg US (26.6 mpg UK or 10.6 L/100km), showcasing Toyota's meticulous engineering approach to optimize fuel usage.

The relationship between fuel capacity and consumption is significant. The carefully calculated fuel consumption rate ensures that the Harrier can cover substantial distances before requiring refueling. This balance is particularly advantageous for drivers embarking on long trips, where the interplay between fuel efficiency and capacity becomes a critical factor.

The 2003 Toyota Harrier 3.0 300G 4WD's fuel capacity and consumption embody Toyota's commitment to practicality and efficiency. By offering a substantial fuel tank alongside a fuel-efficient powertrain, Toyota has engineered a vehicle that not only offers impressive performance but also minimizes the frequency of refueling stops, enhancing the overall driving experience.

Delving into Fuel Averages and Efficiency

Exploring the fuel averages and efficiency of the 2003 Toyota Harrier 3.0 300G 4WD provides a comprehensive understanding of its ability to strike a balance between performance and responsible fuel consumption. Toyota's commitment to engineering excellence is evident in the vehicle's ability to deliver both power and efficiency without compromise.

The fuel averages achieved by the Harrier reflect Toyota's meticulous approach to designing a powertrain that optimizes fuel consumption. With an average fuel consumption rate of 22.1 mpg US (26.6 mpg UK or 10.6 L/100km) according to the 10/15 mode test, the SUV demonstrates its capability to cover substantial distances while using fuel efficiently.

Efficiency is a hallmark of the Harrier's design, with its 3.0-liter V6 gasoline engine optimized for both power and responsible fuel usage. The engine's configuration, coupled with the 5-speed automatic transmission and 4WD drivetrain, contributes to the vehicle's overall efficiency.

This efficiency is particularly noteworthy considering the vehicle's performance capabilities. The engine's maximum power output of 223 PS and torque of 304 Nm are balanced by Toyota's dedication to ensuring that the vehicle maintains its fuel-efficient character across various driving scenarios.

The interplay between fuel averages and efficiency underscores the vehicle's suitability for a wide range of driving scenarios. Whether navigating city streets or embarking on highway journeys, the Harrier's engineering ensures that it offers a satisfying driving experience while being mindful of fuel consumption.

In summary, the 2003 Toyota Harrier 3.0 300G 4WD's fuel averages and efficiency stand as a testament to Toyota's commitment to delivering vehicles that excel in both power and responsible fuel usage. The vehicle's ability to achieve impressive fuel averages without sacrificing performance underscores Toyota's dedication to engineering vehicles that cater to the diverse needs of modern drivers.

Lesser-Known Insights: Engine Specifications

Delving into the lesser-known insights of the 2003 Toyota Harrier 3.0 300G 4WD's engine specifications unveils a world of engineering intricacies that contribute to its impressive performance and efficiency. Beyond the surface, Toyota's attention to detail becomes evident, shaping an engine that not only delivers power but does so with finesse.

At the heart of the Harrier lies the 1MZ-FE engine, a V-type 6 cylinder DOHC configuration. This engine design showcases Toyota's commitment to engineering precision, optimizing the combustion process for enhanced power delivery and efficiency.

With a displacement of 2994 cm³, the engine's capacity translates into robust power and responsiveness. This capacity reflects Toyota's meticulous approach to selecting an engine size that aligns with the vehicle's performance goals while maintaining efficiency standards.

The engine's maximum power output of 223 PS and torque of 304 Nm underscore its dynamic character. However, it's the engine's ability to deliver this power across various driving scenarios that truly distinguishes it. The maximum power is achieved at 5800 rpm, while the maximum torque is reached at 4400 rpm, highlighting the engine's versatile performance characteristics.

Toyota's commitment to ecological standards is evident in the engine's design as well. The 1MZ-FE adheres to the 2000 emission regulation with a 75% reduction in emissions, showcasing Toyota's dedication to minimizing the vehicle's environmental impact.

In conclusion, the 2003 Toyota Harrier 3.0 300G 4WD's engine specifications reveal a world of engineering intricacies that contribute to its exceptional performance, efficiency, and environmental consciousness. Toyota's commitment to precision engineering shines through, ensuring that the engine not only meets but exceeds the expectations of modern drivers.

Analyzing Fuel Economy and Consumption

Analyzing the fuel economy and consumption of the 2003 Toyota Harrier 3.0 300G 4WD offers a comprehensive perspective on its ability to strike a harmonious balance between performance and efficient fuel usage. Toyota's commitment to engineering vehicles that excel in both power and practicality is evident in the vehicle's fuel economy statistics.

The Harrier's fuel economy is a reflection of Toyota's meticulous engineering, optimizing the vehicle's powertrain for responsible fuel consumption. The 3.0-liter V6 gasoline engine, with its engine code 1MZ-FE, delivers a robust maximum power output of 223 PS and torque of 304 Nm. These figures underscore the engine's performance capabilities while also hinting at its efficiency-oriented design.

The 10/15 mode test results provide a clear picture of the Harrier's fuel consumption. With an average consumption rate of 22.1 mpg US (26.6 mpg UK or 10.6 L/100km), the SUV showcases its ability to cover distances without excessive fuel usage. This level of efficiency is particularly valuable for drivers seeking a vehicle that balances performance with responsible fuel consumption.

The interplay between fuel economy and consumption is vital. The engine's ability to deliver power while maintaining efficiency is a testament to Toyota's engineering prowess. This balance is further enhanced by the 5-speed automatic transmission and 4WD drivetrain, ensuring that the vehicle's performance and fuel efficiency remain consistent across various driving scenarios.

In essence, the 2003 Toyota Harrier 3.0 300G 4WD's fuel economy and consumption statistics embody Toyota's dedication to engineering vehicles that cater to diverse driver needs. By blending performance, efficiency, and practicality, Toyota has crafted a vehicle that not only offers exhilarating drives but also contributes to a sustainable driving experience.

Uncommonly Discussed: Wheel Configurations

Unveiling the lesser-discussed facets of the 2003 Toyota Harrier 3.0 300G 4WD leads us to explore its intricate wheel configurations that contribute to its overall performance and visual appeal. Beyond the surface, Toyota's meticulous attention to detail becomes evident, shaping the SUV's driving dynamics and aesthetic stance.

The Harrier's wheel configurations encompass a harmonious fusion of design and functionality. The front and rear tires, sized at 225/65 R17, are thoughtfully paired with 17-inch rims. This pairing strikes a balance between aesthetics and road performance, ensuring that the vehicle's presence on the road is both visually appealing and dynamically adept.

The selection of aluminum disk wheels as a standard feature showcases Toyota's commitment to utilizing quality materials in its engineering. These wheels contribute to the vehicle's performance by providing a combination of durability and weight optimization.

The magnesium wheels, though not standard, stand as a testament to Toyota's pursuit of innovation in wheel design. These wheels, known for their lightweight characteristics, contribute to the vehicle's overall efficiency and performance by reducing unsprung weight.

Beyond the technical aspects, the wheel configurations play a role in enhancing the Harrier's handling and stability. The interplay between tire dimensions, rim sizes, and wheel materials ensures that the vehicle offers a balanced and confident driving experience.

In essence, the 2003 Toyota Harrier 3.0 300G 4WD's wheel configurations reflect Toyota's commitment to engineering vehicles that excel in both form and function. The meticulously designed wheels contribute to the vehicle's performance, efficiency, and visual appeal, offering drivers a holistic driving experience that aligns with modern expectations.

Fuel-Related Factors: Dimensions and MPG

Exploring the interplay between fuel-related factors, dimensions, and MPG (Miles Per Gallon) ratings in the 2003 Toyota Harrier 3.0 300G 4WD unveils a finely tuned balance between performance and efficiency. Toyota's commitment to engineering vehicles that cater to diverse driving scenarios is evident in how these elements harmonize to create a comprehensive driving experience.

The dimensions of the Harrier play a significant role in its fuel efficiency. With an exterior length of 473 cm, width of 184.5 cm, and height of 168 cm, the SUV strikes a balance between size and maneuverability. These dimensions contribute to its aerodynamic profile, reducing drag and enhancing fuel efficiency, particularly during highway cruising.

The interior dimensions further augment the vehicle's fuel-related factors. With an interior length of 199 cm, width of 150 cm, and height of 121 cm, the cabin provides ample space for passengers without compromising the vehicle's overall weight. This optimal balance contributes to a vehicle that can carry passengers comfortably while optimizing fuel efficiency.

The MPG ratings of the Harrier validate Toyota's meticulous approach to powertrain engineering. With an average fuel consumption rate of 22.1 mpg US (26.6 mpg UK or 10.6 L/100km) in the 10/15 mode test, the SUV showcases its ability to cover distances efficiently without excessive fuel consumption. This efficiency is further enhanced by the vehicle's 5-speed automatic transmission and 4WD drivetrain, which contribute to consistent fuel economy across various driving scenarios.

In essence, the 2003 Toyota Harrier 3.0 300G 4WD's dimensions and MPG ratings align with Toyota's pursuit of engineering excellence. The harmonious interplay between size, aerodynamics, and powertrain efficiency results in a vehicle that delivers both performance and practicality, catering to the needs of modern drivers seeking a well-rounded driving experience.

Summarizing Facts: Harrier 3.0 300G 4WD's Attributes

Summarizing the attributes of the 2003 Toyota Harrier 3.0 300G 4WD reveals a vehicle that embodies Toyota's commitment to engineering excellence and driving satisfaction. Across dimensions, fuel efficiency, engine performance, and wheel configurations, the Harrier strikes a harmonious balance that caters to the needs of modern drivers seeking both practicality and performance.

The SUV's dimensions showcase Toyota's meticulous approach to design. With an exterior length of 473 cm, width of 184.5 cm, and height of 168 cm, the Harrier maintains a sleek profile while accommodating passengers comfortably. Inside, an interior length of 199 cm, width of 150 cm, and height of 121 cm provide ample space for occupants.

The 3.0-liter V6 gasoline engine, equipped with the 1MZ-FE engine code, delivers a maximum power output of 223 PS and torque of 304 Nm. These figures underscore the vehicle's dynamic character while maintaining efficient fuel usage.

Fuel efficiency remains a hallmark, with an average consumption rate of 22.1 mpg US (26.6 mpg UK or 10.6 L/100km) according to the 10/15 mode test. This balance between power and economy is achieved through meticulous engineering and a 5-speed automatic transmission.

The wheel configurations, featuring 225/65 R17 tires on 17-inch rims, further contribute to the vehicle's overall performance and visual appeal. Aluminum disk wheels are standard, showcasing Toyota's dedication to quality and durability.

In conclusion, the 2003 Toyota Harrier 3.0 300G 4WD amalgamates dimensions, fuel efficiency, engine performance, and wheel configurations into a vehicle that exemplifies Toyota's pursuit of driving satisfaction. The interplay of these attributes creates a harmonious driving experience, offering both performance enthusiasts and practical drivers a well-rounded and satisfying journey.

Conclusion

In conclusion, the 2003 Toyota Harrier 3.0 300G 4WD stands as a testament to Toyota's unwavering commitment to engineering vehicles that encompass a harmonious blend of performance, efficiency, and practicality. Each aspect of the vehicle's design, from its dimensions to its engine specifications, underscores Toyota's dedication to delivering a well-rounded driving experience that caters to the diverse needs of modern drivers.

The SUV's dimensions strike a balance between size and maneuverability, contributing to its aerodynamic profile and overall road presence. Inside, the interior dimensions provide passengers with comfort without compromising the vehicle's efficiency-oriented design.

The engine specifications, characterized by the 1MZ-FE engine with its V6 configuration, showcase Toyota's precision engineering. The engine's power output and torque deliver dynamic performance while maintaining efficient fuel usage, aligning with Toyota's commitment to both power and practicality.

Fuel efficiency remains a prominent feature, with the 10/15 mode test revealing an average consumption rate of 22.1 mpg US (26.6 mpg UK or 10.6 L/100km). This efficiency is a result of meticulous engineering that optimizes the powertrain for responsible fuel consumption.

The wheel configurations further enhance the vehicle's performance and aesthetics. The choice of tire dimensions and rim sizes, coupled with aluminum disk wheels, reflects Toyota's dedication to quality and performance.

In essence, the 2003 Toyota Harrier 3.0 300G 4WD encapsulates Toyota's philosophy of engineering excellence. It represents a vehicle that harmonizes dimensions, engine performance, fuel efficiency, and wheel configurations to create a driving experience that caters to both enthusiasts and practical drivers. Toyota's commitment to engineering innovation and customer satisfaction is evident throughout the Harrier's attributes, making it a standout choice in the SUV segment.

Frequently Asked Questions (FAQ) About the 2003 Toyota Harrier 3.0 300G 4WD

What is the production period of the 2003 Toyota Harrier 3.0 300G 4WD?

The 2003 Toyota Harrier 3.0 300G 4WD was produced from February 2003 to December 2003.

What type of drivetrain does the 2003 Toyota Harrier 3.0 300G 4WD have?

The 2003 Toyota Harrier 3.0 300G 4WD features a 4WD (Four-Wheel Drive) drivetrain for enhanced traction and stability.

How many seats does the 2003 Toyota Harrier 3.0 300G 4WD have?

The vehicle is equipped with seating for five occupants.

What are the key engine specifications for the 2003 Toyota Harrier 3.0 300G 4WD?

The vehicle is powered by a 3.0-liter V6 engine with the engine code 1MZ-FE, delivering a maximum power output of 223 PS and a torque of 304 Nm.

What is the fuel consumption of the 2003 Toyota Harrier 3.0 300G 4WD?

The 2003 Toyota Harrier 3.0 300G 4WD achieves a fuel consumption rate of 22.1 mpg US (26.6 mpg UK or 10.6 L/100km) based on the 10/15 mode test.

What are the dimensions of the 2003 Toyota Harrier 3.0 300G 4WD?

The vehicle's exterior dimensions are approximately 473 cm in length, 184.5 cm in width, and 168 cm in height.

Does the 2003 Toyota Harrier 3.0 300G 4WD come with a sunroof?

Yes, the vehicle offers the option of a sunroof for an added touch of luxury.

What type of suspension does the 2003 Toyota Harrier 3.0 300G 4WD have?

The vehicle features a front suspension with struts and a rear suspension with struts, contributing to a comfortable and controlled ride.

What is the fuel tank capacity of the 2003 Toyota Harrier 3.0 300G 4WD?

The vehicle's fuel tank has a capacity of 19 US gallons (15.8 UK gallons or 72 L).

How does the 2003 Toyota Harrier 3.0 300G 4WD achieve efficient fuel consumption?

The vehicle combines its 3.0-liter V6 engine, 5-speed automatic transmission, and thoughtful engineering to optimize fuel usage without sacrificing performance.


Brian Wong - Senior Reviews Editor of cars-directory.net

Brian Wong / Author

Brian Wong is an accomplished automotive journalist and editor with a passion for cars. With over a decade of experience in the industry, he has established himself as a trusted voice in the automotive community. Brian has written extensively about a wide range of topics in the field, from the latest trends in car design to innovative safety features and emerging technologies. As a senior reviews editor, he is responsible for test driving and analyzing the latest cars on the market, providing readers with accurate and objective reviews. His articles are widely read and respected for their depth of knowledge and analysis. Brian is committed to staying at the forefront of the latest developments in the automotive industry, and is dedicated to sharing his expertise and insights with his readers.

Add Comment

 * - The field should be filled
* Your Name:
 Contact (e-mail, phone...):
* Comments:
Photos: